# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/dpll/microchip,zl30731.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip Azurite DPLL device maintainers: - Ivan Vecera description: Microchip Azurite DPLL (ZL3073x) is a family of DPLL devices that provides up to 5 independent DPLL channels, up to 10 differential or single-ended inputs and 10 differential or 20 single-ended outputs. These devices support both I2C and SPI interfaces. properties: compatible: enum: - microchip,zl30731 - microchip,zl30732 - microchip,zl30733 - microchip,zl30734 - microchip,zl30735 reg: maxItems: 1 required: - compatible - reg allOf: - $ref: /schemas/dpll/dpll-device.yaml# - $ref: /schemas/spi/spi-peripheral-props.yaml# unevaluatedProperties: false examples: - | i2c { #address-cells = <1>; #size-cells = <0>; dpll@70 { compatible = "microchip,zl30732"; reg = <0x70>; dpll-types = "pps", "eec"; input-pins { #address-cells = <1>; #size-cells = <0>; sync0: pin@0 { /* REF0P - 1 PPS sync source */ reg = <0>; connection-type = "ext"; label = "SMA1"; supported-frequencies-hz = /bits/ 64 <1>; }; pin@1 { /* REF0N - clock source, can pair with sync0 */ reg = <1>; connection-type = "ext"; label = "SMA2"; supported-frequencies-hz = /bits/ 64 <10000 10000000>; ref-sync-sources = <&sync0>; }; }; output-pins { #address-cells = <1>; #size-cells = <0>; pin@3 { /* OUT1N */ reg = <3>; connection-type = "gnss"; esync-control; label = "Output 1"; supported-frequencies-hz = /bits/ 64 <1 10000>; }; }; }; }; - | spi { #address-cells = <1>; #size-cells = <0>; dpll@70 { compatible = "microchip,zl30731"; reg = <0x70>; spi-max-frequency = <12500000>; dpll-types = "pps"; input-pins { #address-cells = <1>; #size-cells = <0>; sync1: pin@0 { /* REF0P - 1 PPS sync source */ reg = <0>; connection-type = "gnss"; label = "GNSS_1PPS_IN"; supported-frequencies-hz = /bits/ 64 <1>; }; pin@1 { /* REF0N - clock source */ reg = <1>; connection-type = "gnss"; label = "GNSS_10M_IN"; supported-frequencies-hz = /bits/ 64 <10000000>; ref-sync-sources = <&sync1>; }; }; output-pins { #address-cells = <1>; #size-cells = <0>; pin@3 { /* OUT1N */ reg = <3>; connection-type = "gnss"; esync-control; label = "Output 1"; supported-frequencies-hz = /bits/ 64 <1 10000>; }; }; }; }; ...