* Milbeaut AHB DMA Controller Milbeaut AHB DMA controller has transfer capability below. - device to memory transfer - memory to device transfer Required property: - compatible: Should be "socionext,milbeaut-m10v-hdmac" - reg: Should contain DMA registers location and length. - interrupts: Should contain all of the per-channel DMA interrupts. Number of channels is configurable - 2, 4 or 8, so the number of interrupts specified should be {2,4,8}. - #dma-cells: Should be 1. Specify the ID of the slave. - clocks: Phandle to the clock used by the HDMAC module. Example: hdmac1: dma-controller@1e110000 { compatible = "socionext,milbeaut-m10v-hdmac"; reg = <0x1e110000 0x10000>; interrupts = <0 132 4>, <0 133 4>, <0 134 4>, <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>, <0 139 4>; #dma-cells = <1>; clocks = <&dummy_clk>; };