* Mediatek UART APDMA Controller Required properties: - compatible should contain: * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA * "mediatek,mt6577-uart-dma" for MT6577 and all of the above - reg: The base address of the APDMA register bank. - interrupts: A single interrupt specifier. - clocks : Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names: The APDMA clock for register accesses Examples: apdma: dma-controller@11000380 { compatible = "mediatek,mt2712-uart-dma"; reg = <0 0x11000380 0 0x400>; interrupts = , , , , , , , ; clocks = <&pericfg CLK_PERI_AP_DMA>; clock-names = "apdma"; #dma-cells = <1>; };