# SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- $id: http://devicetree.org/schemas/display/rockchip/rockchip-vop.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Rockchip SoC display controller (VOP) description: VOP (Video Output Processor) is the display controller for the Rockchip series of SoCs which transfers the image data from a video memory buffer to an external LCD interface. maintainers: - Sandy Huang - Heiko Stuebner properties: compatible: enum: - rockchip,px30-vop-big - rockchip,px30-vop-lit - rockchip,rk3036-vop - rockchip,rk3066-vop - rockchip,rk3126-vop - rockchip,rk3188-vop - rockchip,rk3228-vop - rockchip,rk3288-vop - rockchip,rk3328-vop - rockchip,rk3366-vop - rockchip,rk3368-vop - rockchip,rk3399-vop-big - rockchip,rk3399-vop-lit - rockchip,rv1126-vop reg: minItems: 1 items: - description: Must contain one entry corresponding to the base address and length of the register space. - description: Can optionally contain a second entry corresponding to the CRTC gamma LUT address. interrupts: maxItems: 1 description: The VOP interrupt is shared by several interrupt sources, such as frame start (VSYNC), line flag and other status interrupts. clocks: items: - description: Clock for ddr buffer transfer. - description: Pixel clock. - description: Clock for the ahb bus to R/W the phy regs. clock-names: items: - const: aclk_vop - const: dclk_vop - const: hclk_vop resets: maxItems: 3 reset-names: items: - const: axi - const: ahb - const: dclk port: $ref: /schemas/graph.yaml#/properties/port assigned-clocks: maxItems: 2 assigned-clock-rates: maxItems: 2 iommus: maxItems: 1 power-domains: maxItems: 1 required: - compatible - reg - interrupts - clocks - clock-names - resets - reset-names - port additionalProperties: false examples: - | #include #include #include vopb: vopb@ff930000 { compatible = "rockchip,rk3288-vop"; reg = <0xff930000 0x19c>, <0xff931000 0x1000>; interrupts = ; clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; power-domains = <&power RK3288_PD_VIO>; resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; reset-names = "axi", "ahb", "dclk"; iommus = <&vopb_mmu>; vopb_out: port { #address-cells = <1>; #size-cells = <0>; vopb_out_edp: endpoint@0 { reg = <0>; remote-endpoint = <&edp_in_vopb>; }; vopb_out_hdmi: endpoint@1 { reg = <1>; remote-endpoint = <&hdmi_in_vopb>; }; }; };