# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/panel-simple-lvds-dual-ports.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Simple LVDS panels with one power supply and dual LVDS ports maintainers: - Liu Ying - Thierry Reding - Sam Ravnborg description: | This binding file is a collection of the LVDS panels that has dual LVDS ports and requires only a single power-supply. The first port receives odd pixels, and the second port receives even pixels. There are optionally a backlight and an enable GPIO. The panel may use an OF graph binding for the association to the display, or it may be a direct child node of the display. If the panel is more advanced a dedicated binding file is required. allOf: - $ref: panel-common.yaml# properties: compatible: enum: # compatible must be listed in alphabetical order, ordered by compatible. # The description in the comment is mandatory for each compatible. # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel - auo,g133han01 # AU Optronics Corporation 15.6" FHD (1920x1080) TFT LCD panel - auo,g156han04 # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel - auo,g185han01 # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel - auo,g190ean01 # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel - koe,tx26d202vm0bwa # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel - nlt,nl192108ac18-02d ports: $ref: /schemas/graph.yaml#/properties/ports properties: port@0: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false description: The first sink port. properties: dual-lvds-odd-pixels: type: boolean description: The first sink port for odd pixels. required: - dual-lvds-odd-pixels port@1: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false description: The second sink port. properties: dual-lvds-even-pixels: type: boolean description: The second sink port for even pixels. required: - dual-lvds-even-pixels required: - port@0 - port@1 backlight: true enable-gpios: true power-supply: true additionalProperties: false required: - compatible - ports - power-supply examples: - | panel: panel-lvds { compatible = "koe,tx26d202vm0bwa"; power-supply = <&vdd_lcd_reg>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { dual-lvds-odd-pixels; reg = <0>; panel_lvds0_in: endpoint { remote-endpoint = <&lvds0_out>; }; }; port@1 { dual-lvds-even-pixels; reg = <1>; panel_lvds1_in: endpoint { remote-endpoint = <&lvds1_out>; }; }; }; };