BOE HV070WSA-100 7.01" WSVGA TFT LCD panel Required properties: - compatible: should be "boe,hv070wsa-100" - power-supply: regulator to provide the VCC supply voltage (3.3 volts) - enable-gpios: GPIO pin to enable and disable panel (active high) This binding is compatible with the simple-panel binding, which is specified in simple-panel.txt in this directory. The device node can contain one 'port' child node with one child 'endpoint' node, according to the bindings defined in [1]. This node should describe panel's video bus. [1]: Documentation/devicetree/bindings/media/video-interfaces.txt Example: panel: panel { compatible = "boe,hv070wsa-100"; power-supply = <&vcc_3v3_reg>; enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; port { panel_ep: endpoint { remote-endpoint = <&bridge_out_ep>; }; }; };