# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/advantech,idk-2121wr.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Advantech IDK-2121WR 21.5" Full-HD dual-LVDS panel maintainers: - Lad Prabhakar - Thierry Reding description: | The IDK-2121WR from Advantech is a Full-HD dual-LVDS panel. A dual-LVDS interface is a dual-link connection with even pixels traveling on one link, and with odd pixels traveling on the other link. The panel expects odd pixels on the first port, and even pixels on the second port, therefore the ports must be marked accordingly (with either dual-lvds-odd-pixels or dual-lvds-even-pixels). allOf: - $ref: panel-common.yaml# properties: compatible: items: - const: advantech,idk-2121wr - {} # panel-lvds, but not listed here to avoid false select width-mm: const: 476 height-mm: const: 268 data-mapping: const: vesa-24 panel-timing: true ports: $ref: /schemas/graph.yaml#/properties/ports properties: port@0: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false description: The sink for odd pixels. properties: dual-lvds-odd-pixels: true required: - dual-lvds-odd-pixels port@1: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false description: The sink for even pixels. properties: dual-lvds-even-pixels: true required: - dual-lvds-even-pixels required: - port@0 - port@1 additionalProperties: false required: - compatible - width-mm - height-mm - data-mapping - panel-timing - ports examples: - |+ panel-lvds { compatible = "advantech,idk-2121wr", "panel-lvds"; width-mm = <476>; height-mm = <268>; data-mapping = "vesa-24"; panel-timing { clock-frequency = <148500000>; hactive = <1920>; vactive = <1080>; hsync-len = <44>; hfront-porch = <88>; hback-porch = <148>; vfront-porch = <4>; vback-porch = <36>; vsync-len = <5>; }; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; dual-lvds-odd-pixels; panel_in0: endpoint { remote-endpoint = <&lvds0_out>; }; }; port@1 { reg = <1>; dual-lvds-even-pixels; panel_in1: endpoint { remote-endpoint = <&lvds1_out>; }; }; }; }; ...