# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/bridge/renesas,dw-hdmi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas R-Car DWC HDMI TX Encoder maintainers: - Laurent Pinchart description: | The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP with a companion PHY IP. allOf: - $ref: synopsys,dw-hdmi.yaml# properties: compatible: items: - enum: - renesas,r8a774a1-hdmi # for RZ/G2M compatible HDMI TX - renesas,r8a774b1-hdmi # for RZ/G2N compatible HDMI TX - renesas,r8a774e1-hdmi # for RZ/G2H compatible HDMI TX - renesas,r8a7795-hdmi # for R-Car H3 compatible HDMI TX - renesas,r8a7796-hdmi # for R-Car M3-W compatible HDMI TX - renesas,r8a77961-hdmi # for R-Car M3-W+ compatible HDMI TX - renesas,r8a77965-hdmi # for R-Car M3-N compatible HDMI TX - const: renesas,rcar-gen3-hdmi reg-io-width: const: 1 clocks: maxItems: 2 clock-names: maxItems: 2 resets: maxItems: 1 ports: $ref: /schemas/graph.yaml#/properties/ports properties: port@0: $ref: /schemas/graph.yaml#/properties/port description: Parallel RGB input port port@1: $ref: /schemas/graph.yaml#/properties/port description: HDMI output port port@2: $ref: /schemas/graph.yaml#/properties/port description: Sound input port required: - port@0 - port@1 - port@2 power-domains: maxItems: 1 required: - compatible - reg - clocks - clock-names - resets - interrupts - ports unevaluatedProperties: false examples: - | #include #include #include hdmi@fead0000 { compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; reg = <0xfead0000 0x10000>; interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; clock-names = "iahb", "isfr"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 729>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; dw_hdmi0_in: endpoint { remote-endpoint = <&du_out_hdmi0>; }; }; port@1 { reg = <1>; rcar_dw_hdmi0_out: endpoint { remote-endpoint = <&hdmi0_con>; }; }; port@2 { reg = <2>; rcar_dw_hdmi0_sound_in: endpoint { remote-endpoint = <&hdmi_sound_out>; }; }; }; }; hdmi0-out { compatible = "hdmi-connector"; label = "HDMI0 OUT"; type = "a"; port { hdmi0_con: endpoint { remote-endpoint = <&rcar_dw_hdmi0_out>; }; }; }; ...