# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/bridge/google,cros-ec-anx7688.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port maintainers: - Nicolas Boichat description: | ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to DisplayPort 1.3 Ultra-HDi (4096x2160p60). It is an Analogix ANX7688 chip which is connected to and operated by the ChromeOS Embedded Controller (See google,cros-ec.yaml). It is accessed using I2C tunneling through the EC and therefore its node should be a child of an EC I2C tunnel node (See google,cros-ec-i2c-tunnel.yaml). properties: compatible: const: google,cros-ec-anx7688 reg: maxItems: 1 description: I2C address of the device. ports: $ref: /schemas/graph.yaml#/properties/ports properties: port@0: $ref: /schemas/graph.yaml#/properties/port description: Video port for HDMI input. port@1: $ref: /schemas/graph.yaml#/properties/port description: USB Type-c connector. required: - port@0 - port@1 required: - compatible - reg - ports additionalProperties: false examples: - | i2c_tunnel_b: i2c-tunnel1 { compatible = "google,cros-ec-i2c-tunnel"; google,remote-bus = <1>; #address-cells = <1>; #size-cells = <0>; anx7688: anx7688@2c { compatible = "google,cros-ec-anx7688"; reg = <0x2c>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; anx7688_in: endpoint { remote-endpoint = <&hdmi0_out>; }; }; port@1 { reg = <1>; anx7688_out: endpoint { remote-endpoint = <&typec_connector>; }; }; }; }; };