# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/arm,malidp.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Arm Mali Display Processor (Mali-DP) maintainers: - Liviu Dudau - Andre Przywara description: The following bindings apply to a family of Display Processors sold as licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and DP650 processors that offer multiple composition layers, support for rotation and scaling output. properties: compatible: enum: - arm,mali-dp500 - arm,mali-dp550 - arm,mali-dp650 reg: maxItems: 1 interrupts: items: - description: The interrupt used by the Display Engine (DE). Can be shared with the interrupt for the Scaling Engine (SE), but it will have to be listed individually. - description: The interrupt used by the Scaling Engine (SE). Can be shared with the interrupt for the Display Engine (DE), but it will have to be listed individually. interrupt-names: items: - const: DE - const: SE clock-names: items: - const: pxlclk - const: mclk - const: aclk - const: pclk clocks: items: - description: the pixel clock feeding the output PLL of the processor - description: the main processor clock - description: the AXI interface clock - description: the APB interface clock memory-region: maxItems: 1 description: Phandle to a node describing memory to be used for the framebuffer. If not present, the framebuffer may be located anywhere in memory. arm,malidp-output-port-lines: $ref: /schemas/types.yaml#/definitions/uint8-array description: Number of output lines/bits for each colour channel. items: - description: number of output lines for the red channel (R) - description: number of output lines for the green channel (G) - description: number of output lines for the blue channel (B) arm,malidp-arqos-value: $ref: /schemas/types.yaml#/definitions/uint32 description: Quality-of-Service value for the display engine FIFOs, to write into the RQOS register of the DP500. See the ARM Mali-DP500 TRM for details on the encoding. If omitted, the RQOS register will not be changed. port: $ref: /schemas/graph.yaml#/properties/port unevaluatedProperties: false description: Output endpoint of the controller, connecting the LCD panel signals. additionalProperties: false required: - compatible - reg - interrupts - interrupt-names - clocks - clock-names - port - arm,malidp-output-port-lines examples: - | dp0: malidp@6f200000 { compatible = "arm,mali-dp650"; reg = <0x6f200000 0x20000>; memory-region = <&display_reserved>; interrupts = <168>, <168>; interrupt-names = "DE", "SE"; clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; clock-names = "pxlclk", "mclk", "aclk", "pclk"; arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; arm,malidp-arqos-value = <0xd000d000>; port { dp0_output: endpoint { remote-endpoint = <&tda998x_2_input>; }; }; }; ...