Qualcomm crypto engine driver Required properties: - compatible : should be "qcom,crypto-v5.1" - reg : specifies base physical address and size of the registers map - clocks : phandle to clock-controller plus clock-specifier pair - clock-names : "iface" clocks register interface "bus" clocks data transfer interface "core" clocks rest of the crypto block - dmas : DMA specifiers for tx and rx dma channels. For more see Documentation/devicetree/bindings/dma/dma.txt - dma-names : DMA request names should be "rx" and "tx" Example: crypto@fd45a000 { compatible = "qcom,crypto-v5.1"; reg = <0xfd45a000 0x6000>; clocks = <&gcc GCC_CE2_AHB_CLK>, <&gcc GCC_CE2_AXI_CLK>, <&gcc GCC_CE2_CLK>; clock-names = "iface", "bus", "core"; dmas = <&cryptobam 2>, <&cryptobam 3>; dma-names = "rx", "tx"; };