Marvell Cryptographic Engines And Security Accelerator Required properties: - compatible: should be one of the following string "marvell,orion-crypto" "marvell,kirkwood-crypto" "marvell,dove-crypto" "marvell,armada-370-crypto" "marvell,armada-xp-crypto" "marvell,armada-375-crypto" "marvell,armada-38x-crypto" - reg: base physical address of the engine and length of memory mapped region. Can also contain an entry for the SRAM attached to the CESA, but this representation is deprecated and marvell,crypto-srams should be used instead - reg-names: "regs". Can contain an "sram" entry, but this representation is deprecated and marvell,crypto-srams should be used instead - interrupts: interrupt number - clocks: reference to the crypto engines clocks. This property is not required for orion and kirkwood platforms - clock-names: "cesaX" and "cesazX", X should be replaced by the crypto engine id. This property is not required for the orion and kirkwoord platforms. "cesazX" clocks are not required on armada-370 platforms - marvell,crypto-srams: phandle to crypto SRAM definitions Optional properties: - marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not specified the whole SRAM is used (2KB) Examples: crypto@90000 { compatible = "marvell,armada-xp-crypto"; reg = <0x90000 0x10000>; reg-names = "regs"; interrupts = <48>, <49>; clocks = <&gateclk 23>, <&gateclk 23>; clock-names = "cesa0", "cesa1"; marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>; marvell,crypto-sram-size = <0x600>; };