# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/clock/silabs,si5351.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Silicon Labs Si5351A/B/C programmable I2C clock generators description: | The Silicon Labs Si5351A/B/C are programmable I2C clock generators with up to 8 outputs. Si5351A also has a reduced pin-count package (10-MSOP) where only 3 output clocks are accessible. The internal structure of the clock generators can be found in [1]. [1] Si5351A/B/C Data Sheet https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf maintainers: - Alvin Šipraga properties: compatible: enum: - silabs,si5351a # Si5351A, 20-QFN package - silabs,si5351a-msop # Si5351A, 10-MSOP package - silabs,si5351b # Si5351B, 20-QFN package - silabs,si5351c # Si5351C, 20-QFN package reg: enum: - 0x60 - 0x61 "#address-cells": const: 1 "#size-cells": const: 0 "#clock-cells": const: 1 clocks: minItems: 1 maxItems: 2 clock-names: minItems: 1 items: - const: xtal - const: clkin silabs,pll-source: $ref: /schemas/types.yaml#/definitions/uint32-matrix description: | A list of cell pairs containing a PLL index and its source. Allows to overwrite clock source of the internal PLLs. items: items: - description: PLL A (0) or PLL B (1) enum: [ 0, 1 ] - description: PLL source, XTAL (0) or CLKIN (1, Si5351C only). enum: [ 0, 1 ] silabs,pll-reset-mode: $ref: /schemas/types.yaml#/definitions/uint32-matrix minItems: 1 maxItems: 2 description: A list of cell pairs containing a PLL index and its reset mode. items: items: - description: PLL A (0) or PLL B (1) enum: [ 0, 1 ] - description: | Reset mode for the PLL. Mode can be one of: 0 - reset whenever PLL rate is adjusted (default mode) 1 - do not reset when PLL rate is adjusted In mode 1, the PLL is only reset if the silabs,pll-reset is specified in one of the clock output child nodes that also sources the PLL. This mode may be preferable if output clocks are expected to be adjusted without glitches. enum: [ 0, 1 ] patternProperties: "^clkout@[0-7]$": type: object additionalProperties: false properties: reg: description: Clock output number. clock-frequency: true silabs,clock-source: $ref: /schemas/types.yaml#/definitions/uint32 description: | Source clock of the this output's divider stage. 0 - use multisynth N for this output, where N is the output number 1 - use either multisynth 0 (if output number is 0-3) or multisynth 4 (otherwise) for this output 2 - use XTAL for this output 3 - use CLKIN for this output (Si5351C only) silabs,drive-strength: $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 2, 4, 6, 8 ] description: Output drive strength in mA. silabs,multisynth-source: $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 0, 1 ] description: Source PLL A (0) or B (1) for the corresponding multisynth divider. silabs,pll-master: type: boolean description: | The frequency of the source PLL is allowed to be changed by the multisynth when setting the rate of this clock output. silabs,pll-reset: type: boolean description: Reset the source PLL when enabling this clock output. silabs,disable-state: $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 0, 1, 2, 3 ] description: | Clock output disable state. The state can be one of: 0 - clock output is driven LOW when disabled 1 - clock output is driven HIGH when disabled 2 - clock output is FLOATING (HIGH-Z) when disabled 3 - clock output is never disabled allOf: - if: properties: compatible: contains: const: silabs,si5351a-msop then: properties: reg: maximum: 2 else: properties: reg: maximum: 7 - if: properties: compatible: contains: const: silabs,si5351c then: properties: silabs,clock-source: enum: [ 0, 1, 2, 3 ] else: properties: silabs,clock-source: enum: [ 0, 1, 2 ] required: - reg allOf: - if: properties: compatible: contains: enum: - silabs,si5351a - silabs,si5351a-msop - silabs,si5351b then: properties: clocks: maxItems: 1 clock-names: maxItems: 1 required: - reg - "#address-cells" - "#size-cells" - "#clock-cells" - clocks - clock-names unevaluatedProperties: false examples: - | i2c { #address-cells = <1>; #size-cells = <0>; clock-generator@60 { compatible = "silabs,si5351a-msop"; reg = <0x60>; #address-cells = <1>; #size-cells = <0>; #clock-cells = <1>; /* Connect XTAL input to 25MHz reference */ clocks = <&ref25>; clock-names = "xtal"; /* Use XTAL input as source of PLL0 and PLL1 */ silabs,pll-source = <0 0>, <1 0>; /* Don't reset PLL1 on rate adjustment */ silabs,pll-reset-mode = <1 1>; /* * Overwrite CLK0 configuration with: * - 8 mA output drive strength * - PLL0 as clock source of multisynth 0 * - Multisynth 0 as clock source of output divider * - Multisynth 0 can change PLL0 * - Set initial clock frequency of 74.25MHz */ clkout@0 { reg = <0>; silabs,drive-strength = <8>; silabs,multisynth-source = <0>; silabs,clock-source = <0>; silabs,pll-master; clock-frequency = <74250000>; }; /* * Overwrite CLK1 configuration with: * - 4 mA output drive strength * - PLL1 as clock source of multisynth 1 * - Multisynth 1 as clock source of output divider * - Multisynth 1 can change PLL1 * - Reset PLL1 when enabling this clock output */ clkout@1 { reg = <1>; silabs,drive-strength = <4>; silabs,multisynth-source = <1>; silabs,clock-source = <0>; silabs,pll-master; silabs,pll-reset; }; /* * Overwrite CLK2 configuration with: * - XTAL as clock source of output divider */ clkout@2 { reg = <2>; silabs,clock-source = <2>; }; }; };