# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/clock/qcom,spmi-clkdiv.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SPMI PMIC clock divider maintainers: - Bjorn Andersson - Stephen Boyd description: | Qualcomm SPMI PMIC clock divider configures the clock frequency of a set of outputs on the PMIC. These clocks are typically wired through alternate functions on GPIO pins. properties: compatible: const: qcom,spmi-clkdiv reg: maxItems: 1 clocks: items: - description: Board XO source clock-names: items: - const: xo "#clock-cells": const: 1 qcom,num-clkdivs: $ref: /schemas/types.yaml#/definitions/uint32 description: Number of CLKDIV peripherals. required: - compatible - reg - clocks - clock-names - "#clock-cells" - qcom,num-clkdivs additionalProperties: false examples: - | pmic { #address-cells = <1>; #size-cells = <0>; clock-controller@5b00 { compatible = "qcom,spmi-clkdiv"; reg = <0x5b00>; clocks = <&xo_board>; clock-names = "xo"; #clock-cells = <1>; qcom,num-clkdivs = <3>; assigned-clocks = <&pm8998_clk_divs 1>, <&pm8998_clk_divs 2>, <&pm8998_clk_divs 3>; assigned-clock-rates = <9600000>, <9600000>, <9600000>; }; };