# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/clock/qcom,sm6375-gpucc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Graphics Clock & Reset Controller on SM6375 maintainers: - Konrad Dybcio description: | Qualcomm graphics clock control module provides clocks, resets and power domains on Qualcomm SoCs. See also:: include/dt-bindings/clock/qcom,sm6375-gpucc.h properties: compatible: enum: - qcom,sm6375-gpucc clocks: items: - description: Board XO source - description: GPLL0 main branch source - description: GPLL0 div branch source - description: SNoC DVM GFX source power-domains: description: A phandle and PM domain specifier for the VDD_GX power rail maxItems: 1 required-opps: description: A phandle to an OPP node describing required VDD_GX performance point. maxItems: 1 required: - compatible - clocks - power-domains - required-opps allOf: - $ref: qcom,gcc.yaml# unevaluatedProperties: false examples: - | #include #include #include soc { #address-cells = <2>; #size-cells = <2>; clock-controller@5990000 { compatible = "qcom,sm6375-gpucc"; reg = <0 0x05990000 0 0x9000>; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GCC_GPU_GPLL0_CLK_SRC>, <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>, <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; power-domains = <&rpmpd SM6375_VDDGX>; required-opps = <&rpmpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; }; }; ...