# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/qcom,glymur-gcc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Global Clock & Reset Controller on Glymur SoC

maintainers:
  - Taniya Das <taniya.das@oss.qualcomm.com>

description: |
  Qualcomm global clock control module provides the clocks, resets and power
  domains on Glymur SoC.

  See also: include/dt-bindings/clock/qcom,glymur-gcc.h

properties:
  compatible:
    const: qcom,glymur-gcc

  clocks:
    items:
      - description: Board XO source
      - description: Board XO_A source
      - description: Sleep clock source
      - description: USB 0 Phy DP0 GMUX clock source
      - description: USB 0 Phy DP1 GMUX clock source
      - description: USB 0 Phy PCIE PIPEGMUX clock source
      - description: USB 0 Phy PIPEGMUX clock source
      - description: USB 0 Phy SYS PCIE PIPEGMUX clock source
      - description: USB 1 Phy DP0 GMUX 2 clock source
      - description: USB 1 Phy DP1 GMUX 2 clock source
      - description: USB 1 Phy PCIE PIPEGMUX clock source
      - description: USB 1 Phy PIPEGMUX clock source
      - description: USB 1 Phy SYS PCIE PIPEGMUX clock source
      - description: USB 2 Phy DP0 GMUX 2 clock source
      - description: USB 2 Phy DP1 GMUX 2 clock source
      - description: USB 2 Phy PCIE PIPEGMUX clock source
      - description: USB 2 Phy PIPEGMUX clock source
      - description: USB 2 Phy SYS PCIE PIPEGMUX clock source
      - description: PCIe 3a pipe clock
      - description: PCIe 3b pipe clock
      - description: PCIe 4 pipe clock
      - description: PCIe 5 pipe clock
      - description: PCIe 6 pipe clock
      - description: QUSB4 0 PHY RX 0 clock source
      - description: QUSB4 0 PHY RX 1 clock source
      - description: QUSB4 1 PHY RX 0 clock source
      - description: QUSB4 1 PHY RX 1 clock source
      - description: QUSB4 2 PHY RX 0 clock source
      - description: QUSB4 2 PHY RX 1 clock source
      - description: UFS PHY RX Symbol 0 clock source
      - description: UFS PHY RX Symbol 1 clock source
      - description: UFS PHY TX Symbol 0 clock source
      - description: USB3 PHY 0 pipe clock source
      - description: USB3 PHY 1 pipe clock source
      - description: USB3 PHY 2 pipe clock source
      - description: USB3 UNI PHY pipe 0 clock source
      - description: USB3 UNI PHY pipe 1 clock source
      - description: USB4 PHY 0 pcie pipe clock source
      - description: USB4 PHY 0 Max pipe clock source
      - description: USB4 PHY 1 pcie pipe clock source
      - description: USB4 PHY 1 Max pipe clock source
      - description: USB4 PHY 2 pcie pipe clock source
      - description: USB4 PHY 2 Max pipe clock source

required:
  - compatible
  - clocks
  - '#power-domain-cells'

allOf:
  - $ref: qcom,gcc.yaml#

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/qcom,rpmh.h>
    clock-controller@100000 {
      compatible = "qcom,glymur-gcc";
      reg = <0x100000 0x1f9000>;
      clocks = <&rpmhcc RPMH_CXO_CLK>,
               <&rpmhcc RPMH_CXO_CLK_A>,
               <&sleep_clk>,
               <&usb_0_phy_dp0_gmux>,
               <&usb_0_phy_dp1_gmux>,
               <&usb_0_phy_pcie_pipegmux>,
               <&usb_0_phy_pipegmux>,
               <&usb_0_phy_sys_pcie_pipegmux>,
               <&usb_1_phy_dp0_gmux_2>,
               <&usb_1_phy_dp1_gmux_2>,
               <&usb_1_phy_pcie_pipegmux>,
               <&usb_1_phy_pipegmux>,
               <&usb_1_phy_sys_pcie_pipegmux>,
               <&usb_2_phy_dp0_gmux 2>,
               <&usb_2_phy_dp1_gmux 2>,
               <&usb_2_phy_pcie_pipegmux>,
               <&usb_2_phy_pipegmux>,
               <&usb_2_phy_sys_pcie_pipegmux>,
               <&pcie_3a_pipe>, <&pcie_3b_pipe>,
               <&pcie_4_pipe>, <&pcie_5_pipe>,
               <&pcie_6_pipe>,
               <&qusb4_0_phy_rx_0>, <&qusb4_0_phy_rx_1>,
               <&qusb4_1_phy_rx_0>, <&qusb4_1_phy_rx_1>,
               <&qusb4_2_phy_rx_0>, <&qusb4_2_phy_rx_1>,
               <&ufs_phy_rx_symbol_0>, <&ufs_phy_rx_symbol_1>,
               <&ufs_phy_tx_symbol_0>,
               <&usb3_phy_0_pipe>, <&usb3_phy_1_pipe>,
               <&usb3_phy_2_pipe>,
               <&usb3_uni_phy_pipe_0>, <&usb3_uni_phy_pipe_1>,
               <&usb4_phy_0_pcie_pipe>, <&usb4_phy_0_max_pipe>,
               <&usb4_phy_1_pcie_pipe>, <&usb4_phy_1_max_pipe>,
               <&usb4_phy_2_pcie_pipe>, <&usb4_phy_2_max_pipe>;
      #clock-cells = <1>;
      #reset-cells = <1>;
      #power-domain-cells = <1>;
    };

...