# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-funnel.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Arm CoreSight Programmable Trace Bus Funnel maintainers: - Mathieu Poirier - Mike Leach - Leo Yan - Suzuki K Poulose description: | CoreSight components are compliant with the ARM CoreSight architecture specification and can be connected in various topologies to suit a particular SoCs tracing needs. These trace components can generally be classified as sinks, links and sources. Trace data produced by one or more sources flows through the intermediate links connecting the source to the currently selected sink. The Coresight funnel merges 2-8 trace sources into a single trace stream with programmable enable and priority of input ports. # Need a custom select here or 'arm,primecell' will match on lots of nodes select: properties: compatible: contains: const: arm,coresight-dynamic-funnel required: - compatible allOf: - $ref: /schemas/arm/primecell.yaml# properties: compatible: items: - const: arm,coresight-dynamic-funnel - const: arm,primecell reg: maxItems: 1 clocks: minItems: 1 maxItems: 2 clock-names: minItems: 1 items: - const: apb_pclk - const: atclk power-domains: maxItems: 1 in-ports: $ref: /schemas/graph.yaml#/properties/ports patternProperties: '^port(@[0-7])?$': description: Input connections from CoreSight Trace bus $ref: /schemas/graph.yaml#/properties/port out-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false properties: port: description: Output connection to CoreSight Trace bus $ref: /schemas/graph.yaml#/properties/port required: - compatible - reg - clocks - clock-names - in-ports - out-ports unevaluatedProperties: false examples: - | funnel@20040000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x20040000 0x1000>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; out-ports { port { funnel_out_port0: endpoint { remote-endpoint = <&replicator_in_port0>; }; }; }; in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; funnel_in_port0: endpoint { remote-endpoint = <&ptm0_out_port>; }; }; port@1 { reg = <1>; funnel_in_port1: endpoint { remote-endpoint = <&ptm1_out_port>; }; }; port@2 { reg = <2>; funnel_in_port2: endpoint { remote-endpoint = <&etm0_out_port>; }; }; }; }; ...