What: /sys/devices/platform/eeepc/disp Date: May 2008 KernelVersion: 2.6.26 Contact: "Corentin Chary" Description: This file allows display switching. - 1 = LCD - 2 = CRT - 3 = LCD+CRT If you run X11, you should use xrandr instead. What: /sys/devices/platform/eeepc/camera Date: May 2008 KernelVersion: 2.6.26 Contact: "Corentin Chary" Description: Control the camera. 1 means on, 0 means off. What: /sys/devices/platform/eeepc/cardr Date: May 2008 KernelVersion: 2.6.26 Contact: "Corentin Chary" Description: Control the card reader. 1 means on, 0 means off. What: /sys/devices/platform/eeepc/cpufv Date: Jun 2009 KernelVersion: 2.6.31 Contact: "Corentin Chary" Description: Change CPU clock configuration. On the Eee PC 1000H there are three available clock configuration: * 0 -> Super Performance Mode * 1 -> High Performance Mode * 2 -> Power Saving Mode On Eee PC 701 there is only 2 available clock configurations. Available configuration are listed in available_cpufv file. Reading this file will show the raw hexadecimal value which is defined as follow:: | 8 bit | 8 bit | | `---- Current mode `------------ Availables modes For example, 0x301 means: mode 1 selected, 3 available modes. What: /sys/devices/platform/eeepc/available_cpufv Date: Jun 2009 KernelVersion: 2.6.31 Contact: "Corentin Chary" Description: List available cpufv modes.