What: /sys/class/mic/ Date: October 2013 KernelVersion: 3.13 Contact: Sudeep Dutt Description: The mic class directory belongs to Intel MIC devices and provides information per MIC device. An Intel MIC device is a PCIe form factor add-in Coprocessor card based on the Intel Many Integrated Core (MIC) architecture that runs a Linux OS. What: /sys/class/mic/mic(x) Date: October 2013 KernelVersion: 3.13 Contact: Sudeep Dutt Description: The directories /sys/class/mic/mic0, /sys/class/mic/mic1 etc., represent MIC devices (0,1,..etc). Each directory has information specific to that MIC device. What: /sys/class/mic/mic(x)/family Date: October 2013 KernelVersion: 3.13 Contact: Sudeep Dutt Description: Provides information about the Coprocessor family for an Intel MIC device. For example - "x100" What: /sys/class/mic/mic(x)/stepping Date: October 2013 KernelVersion: 3.13 Contact: Sudeep Dutt Description: Provides information about the silicon stepping for an Intel MIC device. For example - "A0" or "B0" What: /sys/class/mic/mic(x)/state Date: October 2013 KernelVersion: 3.13 Contact: Sudeep Dutt Description: When read, this entry provides the current state of an Intel MIC device in the context of the card OS. Possible values that will be read are: "ready" - The MIC device is ready to boot the card OS. On reading this entry after an OSPM resume, a "boot" has to be written to this entry if the card was previously shutdown during OSPM suspend. "booting" - The MIC device has initiated booting a card OS. "online" - The MIC device has completed boot and is online "shutting_down" - The card OS is shutting down. "resetting" - A reset has been initiated for the MIC device "reset_failed" - The MIC device has failed to reset. When written, this sysfs entry triggers different state change operations depending upon the current state of the card OS. Acceptable values are: "boot" - Boot the card OS image specified by the combination of firmware, ramdisk, cmdline and bootmode sysfs entries. "reset" - Initiates device reset. "shutdown" - Initiates card OS shutdown. What: /sys/class/mic/mic(x)/shutdown_status Date: October 2013 KernelVersion: 3.13 Contact: Sudeep Dutt Description: An Intel MIC device runs a Linux OS during its operation. This OS can shutdown because of various reasons. When read, this entry provides the status on why the card OS was shutdown. Possible values are: "nop" - shutdown status is not applicable, when the card OS is "online" "crashed" - Shutdown because of a HW or SW crash. "halted" - Shutdown because of a halt command. "poweroff" - Shutdown because of a poweroff command. "restart" - Shutdown because of a restart command. What: /sys/class/mic/mic(x)/cmdline Date: October 2013 KernelVersion: 3.13 Contact: Sudeep Dutt Description: An Intel MIC device runs a Linux OS during its operation. Before booting this card OS, it is possible to pass kernel command line options to configure various features in it, similar to self-bootable machines. When read, this entry provides information about the current kernel command line options set to boot the card OS. This entry can be written to change the existing kernel command line options. Typically, the user would want to read the current command line options, append new ones or modify existing ones and then write the whole kernel command line back to this entry. What: /sys/class/mic/mic(x)/firmware Date: October 2013 KernelVersion: 3.13 Contact: Sudeep Dutt Description: When read, this sysfs entry provides the path name under /lib/firmware/ where the firmware image to be booted on the card can be found. The entry can be written to change the firmware image location under /lib/firmware/. What: /sys/class/mic/mic(x)/ramdisk Date: October 2013 KernelVersion: 3.13 Contact: Sudeep Dutt Description: When read, this sysfs entry provides the path name under /lib/firmware/ where the ramdisk image to be used during card OS boot can be found. The entry can be written to change the ramdisk image location under /lib/firmware/. What: /sys/class/mic/mic(x)/bootmode Date: October 2013 KernelVersion: 3.13 Contact: Sudeep Dutt Description: When read, this sysfs entry provides the current bootmode for the card. This sysfs entry can be written with the following valid strings: a) linux - Boot a Linux image. b) flash - Boot an image for flash updates. What: /sys/class/mic/mic(x)/log_buf_addr Date: October 2013 KernelVersion: 3.13 Contact: Sudeep Dutt Description: An Intel MIC device runs a Linux OS during its operation. For debugging purpose and early kernel boot messages, the user can access the card OS log buffer via debugfs. When read, this entry provides the kernel virtual address of the buffer where the card OS log buffer can be read. This entry is written by the host configuration daemon to set the log buffer address. The correct log buffer address to be written can be found in the System.map file of the card OS. What: /sys/class/mic/mic(x)/log_buf_len Date: October 2013 KernelVersion: 3.13 Contact: Sudeep Dutt Description: An Intel MIC device runs a Linux OS during its operation. For debugging purpose and early kernel boot messages, the user can access the card OS log buffer via debugfs. When read, this entry provides the kernel virtual address where the card OS log buffer length can be read. This entry is written by host configuration daemon to set the log buffer length address. The correct log buffer length address to be written can be found in the System.map file of the card OS. What: /sys/class/mic/mic(x)/heartbeat_enable Date: March 2015 KernelVersion: 4.4 Contact: Ashutosh Dixit Description: The MIC drivers detect and inform user space about card crashes via a heartbeat mechanism (see the description of shutdown_status above). User space can turn off this notification by setting heartbeat_enable to 0 and enable it by setting this entry to 1. If this notification is disabled it is the responsibility of user space to detect card crashes via alternative means such as a network ping. This setting is enabled by default.