What:		/sys/bus/iio/devices/iio:deviceX/out_altcurrentY_dwell_en
What:		/sys/bus/iio/devices/iio:deviceX/out_frequencyY_dwell_en
What:		/sys/bus/iio/devices/iio:deviceX/out_phaseY_dwell_en
KernelVersion:	7.3
Contact:	linux-iio@vger.kernel.org
Description:
		For a channel that produces parametric sweeps, this attribute controls
		the sweep behavior at the configured limit. It enables dwell mode at a
		sweep limit when set to 1, i.e., after the sweep is complete the output
		value stays at the limit. Otherwise (setting this value to 0), the sweep
		may stop or restart from the initial position, or even continue by
		reversing the sweep direction.

What:		/sys/bus/iio/devices/iio:deviceX/out_altcurrentY_raw_roc
What:		/sys/bus/iio/devices/iio:deviceX/out_frequencyY_raw_roc
What:		/sys/bus/iio/devices/iio:deviceX/out_phaseY_raw_roc
KernelVersion:	7.3
Contact:	linux-iio@vger.kernel.org
Description:
		For a channel that produces parametric sweeps, this attribute controls
		the rate of change of the parameter in raw units per second (slope).
		This value may be influenced by the channel sampling_frequency attribute
		if available. Multiplying this value by the scale attribute of the
		channel yields the rate of change in physical units per second.

What:		/sys/bus/iio/devices/iio:deviceX/out_altcurrentY_raw_roc_available
KernelVersion:	7.3
Contact:	linux-iio@vger.kernel.org
Description:
		Lists the available roc values for the channel. Values are
		space-separated in ascending order.