What: /sys/kernel/config/most_ Date: March 8, 2019 KernelVersion: 5.2 Description: Interface is used to configure and connect device channels to component drivers. Attributes are visible only when configfs is mounted. To mount configfs in /sys/kernel/config directory use: # mount -t configfs none /sys/kernel/config/ What: /sys/kernel/config/most_cdev/ Date: March 8, 2019 KernelVersion: 5.2 Description: The attributes: buffer_size configure the buffer size for this channel subbuffer_size configure the sub-buffer size for this channel (needed for synchronous and isochronous data) num_buffers configure number of buffers used for this channel datatype configure type of data that will travel over this channel direction configure whether this link will be an input or output dbr_size configure DBR data buffer size (this is used for MediaLB communication only) packets_per_xact configure the number of packets that will be collected from the network before being transmitted via USB (this is used for USB communication only) device name of the device the link is to be attached to channel name of the channel the link is to be attached to comp_params pass parameters needed by some components create_link write '1' to this attribute to trigger the creation of the link. In case of speculative configuration, the creation is post-poned until a physical device is being attached to the bus. destroy_link write '1' to this attribute to destroy an active link What: /sys/kernel/config/most_video/ Date: March 8, 2019 KernelVersion: 5.2 Description: The attributes: buffer_size configure the buffer size for this channel subbuffer_size configure the sub-buffer size for this channel (needed for synchronous and isochronous data) num_buffers configure number of buffers used for this channel datatype configure type of data that will travel over this channel direction configure whether this link will be an input or output dbr_size configure DBR data buffer size (this is used for MediaLB communication only) packets_per_xact configure the number of packets that will be collected from the network before being transmitted via USB (this is used for USB communication only) device name of the device the link is to be attached to channel name of the channel the link is to be attached to comp_params pass parameters needed by some components create_link write '1' to this attribute to trigger the creation of the link. In case of speculative configuration, the creation is post-poned until a physical device is being attached to the bus. destroy_link write '1' to this attribute to destroy an active link What: /sys/kernel/config/most_net/ Date: March 8, 2019 KernelVersion: 5.2 Description: The attributes: buffer_size configure the buffer size for this channel subbuffer_size configure the sub-buffer size for this channel (needed for synchronous and isochronous data) num_buffers configure number of buffers used for this channel datatype configure type of data that will travel over this channel direction configure whether this link will be an input or output dbr_size configure DBR data buffer size (this is used for MediaLB communication only) packets_per_xact configure the number of packets that will be collected from the network before being transmitted via USB (this is used for USB communication only) device name of the device the link is to be attached to channel name of the channel the link is to be attached to comp_params pass parameters needed by some components create_link write '1' to this attribute to trigger the creation of the link. In case of speculative configuration, the creation is post-poned until a physical device is being attached to the bus. destroy_link write '1' to this attribute to destroy an active link What: /sys/kernel/config/most_sound/ Date: March 8, 2019 KernelVersion: 5.2 Description: The attributes: create_card write '1' to this attribute to trigger the registration of the sound card with the ALSA subsystem. What: /sys/kernel/config/most_sound// Date: March 8, 2019 KernelVersion: 5.2 Description: The attributes: buffer_size configure the buffer size for this channel subbuffer_size configure the sub-buffer size for this channel (needed for synchronous and isochronous data) num_buffers configure number of buffers used for this channel datatype configure type of data that will travel over this channel direction configure whether this link will be an input or output dbr_size configure DBR data buffer size (this is used for MediaLB communication only) packets_per_xact configure the number of packets that will be collected from the network before being transmitted via USB (this is used for USB communication only) device name of the device the link is to be attached to channel name of the channel the link is to be attached to comp_params pass parameters needed by some components create_link write '1' to this attribute to trigger the creation of the link. In case of speculative configuration, the creation is post-poned until a physical device is being attached to the bus. destroy_link write '1' to this attribute to destroy an active link