What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/buttons Date: Mai 2012 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split into general settings and button settings. The buttons variable holds information about button layout. When written, this file lets one write the respective profile buttons to the mouse. The data has to be 47 bytes long. The mouse will reject invalid data. Which profile to write is determined by the profile number contained in the data. Before reading this file, control has to be written to select which profile to read. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/control Date: Mai 2012 Contact: Stefan Achatz Description: When written, this file lets one select which data from which profile will be read next. The data has to be 3 bytes long. This file is writeonly. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/general Date: Mai 2012 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split into general settings and button settings. A profile holds information like resolution, sensitivity and light effects. When written, this file lets one write the respective profile settings back to the mouse. The data has to be 43 bytes long. The mouse will reject invalid data. Which profile to write is determined by the profile number contained in the data. This file is writeonly. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/info Date: Mai 2012 Contact: Stefan Achatz Description: When read, this file returns general data like firmware version. When written, the device can be reset. The data is 8 bytes long. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/macro Date: Mai 2012 Contact: Stefan Achatz Description: When written, this file lets one store macros with max 500 keystrokes for a specific button for a specific profile. Button and profile numbers are included in written data. The data has to be 2083 bytes long. Before reading this file, control has to be written to select which profile and key to read. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/profile Date: Mai 2012 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. profile holds number of actual profile. This value is persistent, so its value determines the profile that's active when the mouse is powered on next time. When written, the mouse activates the set profile immediately. The data has to be 3 bytes long. The mouse will reject invalid data. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/sensor Date: July 2012 Contact: Stefan Achatz Description: The mouse has a Avago ADNS-3090 sensor. This file allows reading and writing of the mouse sensors registers. The data has to be 4 bytes long. Users: http://roccat.sourceforge.net