/* * linux/drivers/s390/crypto/z90crypt.h * * z90crypt 1.3.3 * * Copyright (C) 2001, 2005 IBM Corporation * Author(s): Robert Burroughs (burrough@us.ibm.com) * Eric Rossman (edrossma@us.ibm.com) * * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _Z90CRYPT_H_ #define _Z90CRYPT_H_ #include #define VERSION_Z90CRYPT_H "$Revision: 1.2.2.4 $" #define z90crypt_VERSION 1 #define z90crypt_RELEASE 3 // 2 = PCIXCC, 3 = rewrite for coding standards #define z90crypt_VARIANT 3 // 3 = CEX2A support /** * struct ica_rsa_modexpo * * Requirements: * - outputdatalength is at least as large as inputdatalength. * - All key parts are right justified in their fields, padded on * the left with zeroes. * - length(b_key) = inputdatalength * - length(n_modulus) = inputdatalength */ struct ica_rsa_modexpo { char __user * inputdata; unsigned int inputdatalength; char __user * outputdata; unsigned int outputdatalength; char __user * b_key; char __user * n_modulus; }; /** * struct ica_rsa_modexpo_crt * * Requirements: * - inputdatalength is even. * - outputdatalength is at least as large as inputdatalength. * - All key parts are right justified in their fields, padded on * the left with zeroes. * - length(bp_key) = inputdatalength/2 + 8 * - length(bq_key) = inputdatalength/2 * - length(np_key) = inputdatalength/2 + 8 * - length(nq_key) = inputdatalength/2 * - length(u_mult_inv) = inputdatalength/2 + 8 */ struct ica_rsa_modexpo_crt { char __user * inputdata; unsigned int inputdatalength; char __user * outputdata; unsigned int outputdatalength; char __user * bp_key; char __user * bq_key; char __user * np_prime; char __user * nq_prime; char __user * u_mult_inv; }; #define Z90_IOCTL_MAGIC 'z' // NOTE: Need to allocate from linux folks /** * Interface notes: * * The ioctl()s which are implemented (along with relevant details) * are: * * ICARSAMODEXPO * Perform an RSA operation using a Modulus-Exponent pair * This takes an ica_rsa_modexpo struct as its arg. * * NOTE: please refer to the comments preceding this structure * for the implementation details for the contents of the * block * * ICARSACRT * Perform an RSA operation using a Chinese-Remainder Theorem key * This takes an ica_rsa_modexpo_crt struct as its arg. * * NOTE: please refer to the comments preceding this structure * for the implementation details for the contents of the * block * * Z90STAT_TOTALCOUNT * Return an integer count of all device types together. * * Z90STAT_PCICACOUNT * Return an integer count of all PCICAs. * * Z90STAT_PCICCCOUNT * Return an integer count of all PCICCs. * * Z90STAT_PCIXCCMCL2COUNT * Return an integer count of all MCL2 PCIXCCs. * * Z90STAT_PCIXCCMCL3COUNT * Return an integer count of all MCL3 PCIXCCs. * * Z90STAT_CEX2CCOUNT * Return an integer count of all CEX2Cs. * * Z90STAT_CEX2ACOUNT * Return an integer count of all CEX2As. * * Z90STAT_REQUESTQ_COUNT * Return an integer count of the number of entries waiting to be * sent to a device. * * Z90STAT_PENDINGQ_COUNT * Return an integer count of the number of entries sent to a * device awaiting the reply. * * Z90STAT_TOTALOPEN_COUNT * Return an integer count of the number of open file handles. * * Z90STAT_DOMAIN_INDEX * Return the integer value of the Cryptographic Domain. * * Z90STAT_STATUS_MASK * Return an 64 element array of unsigned chars for the status of * all devices. * 0x01: PCICA * 0x02: PCICC * 0x03: PCIXCC_MCL2 * 0x04: PCIXCC_MCL3 * 0x05: CEX2C * 0x06: CEX2A * 0x0d: device is disabled via the proc filesystem * * Z90STAT_QDEPTH_MASK * Return an 64 element array of unsigned chars for the queue * depth of all devices. * * Z90STAT_PERDEV_REQCNT * Return an 64 element array of unsigned integers for the number * of successfully completed requests per device since the device * was detected and made available. * * ICAZ90STATUS (deprecated) * Return some device driver status in a ica_z90_status struct * This takes an ica_z90_status struct as its arg. * * NOTE: this ioctl() is deprecated, and has been replaced with * single ioctl()s for each type of status being requested * * Z90STAT_PCIXCCCOUNT (deprecated) * Return an integer count of all PCIXCCs (MCL2 + MCL3). * This is DEPRECATED now that MCL3 PCIXCCs are treated differently from * MCL2 PCIXCCs. * * Z90QUIESCE (not recommended) * Quiesce the driver. This is intended to stop all new * requests from being processed. Its use is NOT recommended, * except in circumstances where there is no other way to stop * callers from accessing the driver. Its original use was to * allow the driver to be "drained" of work in preparation for * a system shutdown. * * NOTE: once issued, this ban on new work cannot be undone * except by unloading and reloading the driver. */ /** * Supported ioctl calls */ #define ICARSAMODEXPO _IOC(_IOC_READ|_IOC_WRITE, Z90_IOCTL_MAGIC, 0x05, 0) #define ICARSACRT _IOC(_IOC_READ|_IOC_WRITE, Z90_IOCTL_MAGIC, 0x06, 0) /* DEPRECATED status calls (bound for removal at some point) */ #define ICAZ90STATUS _IOR(Z90_IOCTL_MAGIC, 0x10, struct ica_z90_status) #define Z90STAT_PCIXCCCOUNT _IOR(Z90_IOCTL_MAGIC, 0x43, int) /* unrelated to ICA callers */ #define Z90QUIESCE _IO(Z90_IOCTL_MAGIC, 0x11) /* New status calls */ #define Z90STAT_TOTALCOUNT _IOR(Z90_IOCTL_MAGIC, 0x40, int) #define Z90STAT_PCICACOUNT _IOR(Z90_IOCTL_MAGIC, 0x41, int) #define Z90STAT_PCICCCOUNT _IOR(Z90_IOCTL_MAGIC, 0x42, int) #define Z90STAT_PCIXCCMCL2COUNT _IOR(Z90_IOCTL_MAGIC, 0x4b, int) #define Z90STAT_PCIXCCMCL3COUNT _IOR(Z90_IOCTL_MAGIC, 0x4c, int) #define Z90STAT_CEX2CCOUNT _IOR(Z90_IOCTL_MAGIC, 0x4d, int) #define Z90STAT_CEX2ACOUNT _IOR(Z90_IOCTL_MAGIC, 0x4e, int) #define Z90STAT_REQUESTQ_COUNT _IOR(Z90_IOCTL_MAGIC, 0x44, int) #define Z90STAT_PENDINGQ_COUNT _IOR(Z90_IOCTL_MAGIC, 0x45, int) #define Z90STAT_TOTALOPEN_COUNT _IOR(Z90_IOCTL_MAGIC, 0x46, int) #define Z90STAT_DOMAIN_INDEX _IOR(Z90_IOCTL_MAGIC, 0x47, int) #define Z90STAT_STATUS_MASK _IOR(Z90_IOCTL_MAGIC, 0x48, char[64]) #define Z90STAT_QDEPTH_MASK _IOR(Z90_IOCTL_MAGIC, 0x49, char[64]) #define Z90STAT_PERDEV_REQCNT _IOR(Z90_IOCTL_MAGIC, 0x4a, int[64]) /** * local errno definitions */ #define ENOBUFF 129 // filp->private_data->...>work_elem_p->buffer is NULL #define EWORKPEND 130 // user issues ioctl while another pending #define ERELEASED 131 // user released while ioctl pending #define EQUIESCE 132 // z90crypt quiescing (no more work allowed) #define ETIMEOUT 133 // request timed out #define EUNKNOWN 134 // some unrecognized error occured (retry may succeed) #define EGETBUFF 135 // Error getting buffer or hardware lacks capability // (retry in software) /** * DEPRECATED STRUCTURES */ /** * This structure is DEPRECATED and the corresponding ioctl() has been * replaced with individual ioctl()s for each piece of data! * This structure will NOT survive past version 1.3.1, so switch to the * new ioctl()s. */ #define MASK_LENGTH 64 // mask length struct ica_z90_status { int totalcount; int leedslitecount; // PCICA int leeds2count; // PCICC // int PCIXCCCount; is not in struct for backward compatibility int requestqWaitCount; int pendingqWaitCount; int totalOpenCount; int cryptoDomain; // status: 0=not there, 1=PCICA, 2=PCICC, 3=PCIXCC_MCL2, 4=PCIXCC_MCL3, // 5=CEX2C unsigned char status[MASK_LENGTH]; // qdepth: # work elements waiting for each device unsigned char qdepth[MASK_LENGTH]; }; #endif /* _Z90CRYPT_H_ */