From 1ef5b816c0eaf84f91106cfc0893069c49e86113 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 10 Oct 2010 00:54:02 +0200 Subject: ieee1394: move init_ohci1394_dma to drivers/firewire/ because drivers/ieee1394/ will be deleted. Additional changes: - add some #include directives - adjust to use firewire/ohci.h instead of ieee1394/ohci1394.h, replace struct ti_ohci by a minimal struct ohci, replace quadlet_t from ieee1394_types.h by u32 - two or three trivial stylistic changes - __iomem annotation Signed-off-by: Stefan Richter --- drivers/ieee1394/Makefile | 2 - drivers/ieee1394/init_ohci1394_dma.c | 285 ----------------------------------- 2 files changed, 287 deletions(-) delete mode 100644 drivers/ieee1394/init_ohci1394_dma.c (limited to 'drivers/ieee1394') diff --git a/drivers/ieee1394/Makefile b/drivers/ieee1394/Makefile index 1f8153b575033..427b86b87760f 100644 --- a/drivers/ieee1394/Makefile +++ b/drivers/ieee1394/Makefile @@ -14,5 +14,3 @@ obj-$(CONFIG_IEEE1394_RAWIO) += raw1394.o obj-$(CONFIG_IEEE1394_SBP2) += sbp2.o obj-$(CONFIG_IEEE1394_DV1394) += dv1394.o obj-$(CONFIG_IEEE1394_ETH1394) += eth1394.o - -obj-$(CONFIG_PROVIDE_OHCI1394_DMA_INIT) += init_ohci1394_dma.o diff --git a/drivers/ieee1394/init_ohci1394_dma.c b/drivers/ieee1394/init_ohci1394_dma.c deleted file mode 100644 index ddaab6eb8acee..0000000000000 --- a/drivers/ieee1394/init_ohci1394_dma.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * init_ohci1394_dma.c - Initializes physical DMA on all OHCI 1394 controllers - * - * Copyright (C) 2006-2007 Bernhard Kaindl - * - * Derived from drivers/ieee1394/ohci1394.c and arch/x86/kernel/early-quirks.c - * this file has functions to: - * - scan the PCI very early on boot for all OHCI 1394-compliant controllers - * - reset and initialize them and make them join the IEEE1394 bus and - * - enable physical DMA on them to allow remote debugging - * - * All code and data is marked as __init and __initdata, respective as - * during boot, all OHCI1394 controllers may be claimed by the firewire - * stack and at this point, this code should not touch them anymore. - * - * To use physical DMA after the initialization of the firewire stack, - * be sure that the stack enables it and (re-)attach after the bus reset - * which may be caused by the firewire stack initialization. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include /* for ohci1394.h */ -#include -#include /* for PCI defines */ -#include -#include /* for direct PCI config space access */ -#include - -#include "ieee1394_types.h" -#include "ohci1394.h" - -int __initdata init_ohci1394_dma_early; - -/* Reads a PHY register of an OHCI-1394 controller */ -static inline u8 __init get_phy_reg(struct ti_ohci *ohci, u8 addr) -{ - int i; - quadlet_t r; - - reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | 0x00008000); - - for (i = 0; i < OHCI_LOOP_COUNT; i++) { - if (reg_read(ohci, OHCI1394_PhyControl) & 0x80000000) - break; - mdelay(1); - } - r = reg_read(ohci, OHCI1394_PhyControl); - - return (r & 0x00ff0000) >> 16; -} - -/* Writes to a PHY register of an OHCI-1394 controller */ -static inline void __init set_phy_reg(struct ti_ohci *ohci, u8 addr, u8 data) -{ - int i; - - reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | data | 0x00004000); - - for (i = 0; i < OHCI_LOOP_COUNT; i++) { - u32 r = reg_read(ohci, OHCI1394_PhyControl); - if (!(r & 0x00004000)) - break; - mdelay(1); - } -} - -/* Resets an OHCI-1394 controller (for sane state before initialization) */ -static inline void __init init_ohci1394_soft_reset(struct ti_ohci *ohci) { - int i; - - reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset); - - for (i = 0; i < OHCI_LOOP_COUNT; i++) { - if (!(reg_read(ohci, OHCI1394_HCControlSet) - & OHCI1394_HCControl_softReset)) - break; - mdelay(1); - } -} - -/* Basic OHCI-1394 register and port inititalization */ -static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci) -{ - quadlet_t bus_options; - int num_ports, i; - - /* Put some defaults to these undefined bus options */ - bus_options = reg_read(ohci, OHCI1394_BusOptions); - bus_options |= 0x60000000; /* Enable CMC and ISC */ - bus_options &= ~0x00ff0000; /* XXX: Set cyc_clk_acc to zero for now */ - bus_options &= ~0x18000000; /* Disable PMC and BMC */ - reg_write(ohci, OHCI1394_BusOptions, bus_options); - - /* Set the bus number */ - reg_write(ohci, OHCI1394_NodeID, 0x0000ffc0); - - /* Enable posted writes */ - reg_write(ohci, OHCI1394_HCControlSet, - OHCI1394_HCControl_postedWriteEnable); - - /* Clear link control register */ - reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff); - - /* enable phys */ - reg_write(ohci, OHCI1394_LinkControlSet, - OHCI1394_LinkControl_RcvPhyPkt); - - /* Don't accept phy packets into AR request context */ - reg_write(ohci, OHCI1394_LinkControlClear, 0x00000400); - - /* Clear the Isochonouys interrupt masks */ - reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff); - - /* Accept asyncronous transfer requests from all nodes for now */ - reg_write(ohci,OHCI1394_AsReqFilterHiSet, 0x80000000); - - /* Specify asyncronous transfer retries */ - reg_write(ohci, OHCI1394_ATRetries, - OHCI1394_MAX_AT_REQ_RETRIES | - (OHCI1394_MAX_AT_RESP_RETRIES<<4) | - (OHCI1394_MAX_PHYS_RESP_RETRIES<<8)); - - /* We don't want hardware swapping */ - reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwap); - - /* Enable link */ - reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable); - - /* If anything is connected to a port, make sure it is enabled */ - num_ports = get_phy_reg(ohci, 2) & 0xf; - for (i = 0; i < num_ports; i++) { - unsigned int status; - - set_phy_reg(ohci, 7, i); - status = get_phy_reg(ohci, 8); - - if (status & 0x20) - set_phy_reg(ohci, 8, status & ~1); - } -} - -/** - * init_ohci1394_wait_for_busresets - wait until bus resets are completed - * - * OHCI1394 initialization itself and any device going on- or offline - * and any cable issue cause a IEEE1394 bus reset. The OHCI1394 spec - * specifies that physical DMA is disabled on each bus reset and it - * has to be enabled after each bus reset when needed. We resort - * to polling here because on early boot, we have no interrupts. - */ -static inline void __init init_ohci1394_wait_for_busresets(struct ti_ohci *ohci) -{ - int i, events; - - for (i=0; i < 9; i++) { - mdelay(200); - events = reg_read(ohci, OHCI1394_IntEventSet); - if (events & OHCI1394_busReset) - reg_write(ohci, OHCI1394_IntEventClear, - OHCI1394_busReset); - } -} - -/** - * init_ohci1394_enable_physical_dma - Enable physical DMA for remote debugging - * This enables remote DMA access over IEEE1394 from every host for the low - * 4GB of address space. DMA accesses above 4GB are not available currently. - */ -static inline void __init init_ohci1394_enable_physical_dma(struct ti_ohci *hci) -{ - reg_write(hci, OHCI1394_PhyReqFilterHiSet, 0xffffffff); - reg_write(hci, OHCI1394_PhyReqFilterLoSet, 0xffffffff); - reg_write(hci, OHCI1394_PhyUpperBound, 0xffff0000); -} - -/** - * init_ohci1394_reset_and_init_dma - init controller and enable DMA - * This initializes the given controller and enables physical DMA engine in it. - */ -static inline void __init init_ohci1394_reset_and_init_dma(struct ti_ohci *ohci) -{ - /* Start off with a soft reset, clears everything to a sane state. */ - init_ohci1394_soft_reset(ohci); - - /* Accessing some registers without LPS enabled may cause lock up */ - reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS); - - /* Disable and clear interrupts */ - reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); - reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); - - mdelay(50); /* Wait 50msec to make sure we have full link enabled */ - - init_ohci1394_initialize(ohci); - /* - * The initialization causes at least one IEEE1394 bus reset. Enabling - * physical DMA only works *after* *all* bus resets have calmed down: - */ - init_ohci1394_wait_for_busresets(ohci); - - /* We had to wait and do this now if we want to debug early problems */ - init_ohci1394_enable_physical_dma(ohci); -} - -/** - * init_ohci1394_controller - Map the registers of the controller and init DMA - * This maps the registers of the specified controller and initializes it - */ -static inline void __init init_ohci1394_controller(int num, int slot, int func) -{ - unsigned long ohci_base; - struct ti_ohci ohci; - - printk(KERN_INFO "init_ohci1394_dma: initializing OHCI-1394" - " at %02x:%02x.%x\n", num, slot, func); - - ohci_base = read_pci_config(num, slot, func, PCI_BASE_ADDRESS_0+(0<<2)) - & PCI_BASE_ADDRESS_MEM_MASK; - - set_fixmap_nocache(FIX_OHCI1394_BASE, ohci_base); - - ohci.registers = (void *)fix_to_virt(FIX_OHCI1394_BASE); - - init_ohci1394_reset_and_init_dma(&ohci); -} - -/** - * debug_init_ohci1394_dma - scan for OHCI1394 controllers and init DMA on them - * Scans the whole PCI space for OHCI1394 controllers and inits DMA on them - */ -void __init init_ohci1394_dma_on_all_controllers(void) -{ - int num, slot, func; - - if (!early_pci_allowed()) - return; - - /* Poor man's PCI discovery, the only thing we can do at early boot */ - for (num = 0; num < 32; num++) { - for (slot = 0; slot < 32; slot++) { - for (func = 0; func < 8; func++) { - u32 class = read_pci_config(num,slot,func, - PCI_CLASS_REVISION); - if ((class == 0xffffffff)) - continue; /* No device at this func */ - - if (class>>8 != PCI_CLASS_SERIAL_FIREWIRE_OHCI) - continue; /* Not an OHCI-1394 device */ - - init_ohci1394_controller(num, slot, func); - break; /* Assume one controller per device */ - } - } - } - printk(KERN_INFO "init_ohci1394_dma: finished initializing OHCI DMA\n"); -} - -/** - * setup_init_ohci1394_early - enables early OHCI1394 DMA initialization - */ -static int __init setup_ohci1394_dma(char *opt) -{ - if (!strcmp(opt, "early")) - init_ohci1394_dma_early = 1; - return 0; -} - -/* passing ohci1394_dma=early on boot causes early OHCI1394 DMA initialization */ -early_param("ohci1394_dma", setup_ohci1394_dma); -- cgit 1.2.3-korg