From de957c89b7dadb3147e885d7b6eb9db73d0eea57 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Fri, 28 Oct 2005 17:46:13 -0700 Subject: [PATCH] MPC8xx PCMCIA driver Here is an uptodated version of the MPC8xx PCMCIA driver for v2.6, addressing comments by Jeff and Dominik: - use IO accessors instead of direct device memory referencing - avoid usage of non-standard "uint/uchar" data types - kill struct typedef's Will submit it for inclusion once v2.6.14 is out. Testing on 8xx platforms is more than welcome! Works like a charm on our custom hardware (CONFIG_PRxK). Cc: Dominik Brodowski Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- drivers/pcmcia/Kconfig | 10 + drivers/pcmcia/Makefile | 1 + drivers/pcmcia/m8xx_pcmcia.c | 1290 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1301 insertions(+) create mode 100644 drivers/pcmcia/m8xx_pcmcia.c diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 36cc9a96a3387..ccf20039e9097 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -154,6 +154,16 @@ config TCIC "Bridge" is the name used for the hardware inside your computer that PCMCIA cards are plugged into. If unsure, say N. +config PCMCIA_M8XX + tristate "MPC8xx PCMCIA support" + depends on PCMCIA && PPC + select PCCARD_NONSTATIC + help + Say Y here to include support for PowerPC 8xx series PCMCIA + controller. + + This driver is also available as a module called m8xx_pcmcia. + config HD64465_PCMCIA tristate "HD64465 host bridge support" depends on HD64465 && PCMCIA diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index a41fbb38fdcbe..cb4861d9cb802 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_PD6729) += pd6729.o obj-$(CONFIG_I82365) += i82365.o obj-$(CONFIG_I82092) += i82092.o obj-$(CONFIG_TCIC) += tcic.o +obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o obj-$(CONFIG_HD64465_PCMCIA) += hd64465_ss.o obj-$(CONFIG_PCMCIA_SA1100) += sa11xx_core.o sa1100_cs.o obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c new file mode 100644 index 0000000000000..f8bed87cf2f14 --- /dev/null +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -0,0 +1,1290 @@ +/* + * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series. + * + * (C) 1999-2000 Magnus Damm + * (C) 2001-2002 Montavista Software, Inc. + * + * + * Support for two slots by Cyclades Corporation + * + * Further fixes, v2.6 kernel port + * + * + * "The ExCA standard specifies that socket controllers should provide + * two IO and five memory windows per socket, which can be independently + * configured and positioned in the host address space and mapped to + * arbitrary segments of card address space. " - David A Hinds. 1999 + * + * This controller does _not_ meet the ExCA standard. + * + * m8xx pcmcia controller brief info: + * + 8 windows (attrib, mem, i/o) + * + up to two slots (SLOT_A and SLOT_B) + * + inputpins, outputpins, event and mask registers. + * - no offset register. sigh. + * + * Because of the lacking offset register we must map the whole card. + * We assign each memory window PCMCIA_MEM_WIN_SIZE address space. + * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO + * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE. + * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE. + * They are maximum 64KByte each... + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#ifdef PCMCIA_DEBUG +static int pc_debug = PCMCIA_DEBUG; +module_param(pc_debug, int, 0); +#define dprintk(args...) printk(KERN_DEBUG "m8xx_pcmcia: " args); +#else +#define dprintk(args...) +#endif + +#define pcmcia_info(args...) printk(KERN_INFO "m8xx_pcmcia: "args) +#define pcmcia_error(args...) printk(KERN_ERR "m8xx_pcmcia: "args) + +static const char *version = "Version 0.06, Aug 2005"; +MODULE_LICENSE("Dual MPL/GPL"); + +#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) + +/* The RPX series use SLOT_B */ +#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE) +#define CONFIG_PCMCIA_SLOT_B +#define CONFIG_BD_IS_MHZ +#endif + +/* The ADS board use SLOT_A */ +#ifdef CONFIG_ADS +#define CONFIG_PCMCIA_SLOT_A +#define CONFIG_BD_IS_MHZ +#endif + +/* The FADS series are a mess */ +#ifdef CONFIG_FADS +#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC860) || defined(CONFIG_MPC821) +#define CONFIG_PCMCIA_SLOT_A +#else +#define CONFIG_PCMCIA_SLOT_B +#endif +#endif + +/* Cyclades ACS uses both slots */ +#ifdef CONFIG_PRxK +#define CONFIG_PCMCIA_SLOT_A +#define CONFIG_PCMCIA_SLOT_B +#endif + +#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */ + +#if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B) + +#define PCMCIA_SOCKETS_NO 2 +/* We have only 8 windows, dualsocket support will be limited. */ +#define PCMCIA_MEM_WIN_NO 2 +#define PCMCIA_IO_WIN_NO 2 +#define PCMCIA_SLOT_MSG "SLOT_A and SLOT_B" + +#elif defined(CONFIG_PCMCIA_SLOT_A) || defined(CONFIG_PCMCIA_SLOT_B) + +#define PCMCIA_SOCKETS_NO 1 +/* full support for one slot */ +#define PCMCIA_MEM_WIN_NO 5 +#define PCMCIA_IO_WIN_NO 2 + +/* define _slot_ to be able to optimize macros */ + +#ifdef CONFIG_PCMCIA_SLOT_A +#define _slot_ 0 +#define PCMCIA_SLOT_MSG "SLOT_A" +#else +#define _slot_ 1 +#define PCMCIA_SLOT_MSG "SLOT_B" +#endif + +#else +#error m8xx_pcmcia: Bad configuration! +#endif + +/* ------------------------------------------------------------------------- */ + +#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */ +#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */ +#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */ + +#define PCMCIA_SCHLVL PCMCIA_INTERRUPT /* Status Change Interrupt Level */ + +/* ------------------------------------------------------------------------- */ + +/* 2.4.x and newer has this always in HZ */ +#define M8XX_BUSFREQ ((((bd_t *)&(__res))->bi_busfreq)) + +static int pcmcia_schlvl = PCMCIA_SCHLVL; + +static spinlock_t events_lock = SPIN_LOCK_UNLOCKED; + + +#define PCMCIA_SOCKET_KEY_5V 1 +#define PCMCIA_SOCKET_KEY_LV 2 + +/* look up table for pgcrx registers */ +static u32 *m8xx_pgcrx[2] = { + &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pgcra, + &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pgcrb +}; + +/* + * This structure is used to address each window in the PCMCIA controller. + * + * Keep in mind that we assume that pcmcia_win[n+1] is mapped directly + * after pcmcia_win[n]... + */ + +struct pcmcia_win { + u32 br; + u32 or; +}; + +/* + * For some reason the hardware guys decided to make both slots share + * some registers. + * + * Could someone invent object oriented hardware ? + * + * The macros are used to get the right bit from the registers. + * SLOT_A : slot = 0 + * SLOT_B : slot = 1 + */ + +#define M8XX_PCMCIA_VS1(slot) (0x80000000 >> (slot << 4)) +#define M8XX_PCMCIA_VS2(slot) (0x40000000 >> (slot << 4)) +#define M8XX_PCMCIA_VS_MASK(slot) (0xc0000000 >> (slot << 4)) +#define M8XX_PCMCIA_VS_SHIFT(slot) (30 - (slot << 4)) + +#define M8XX_PCMCIA_WP(slot) (0x20000000 >> (slot << 4)) +#define M8XX_PCMCIA_CD2(slot) (0x10000000 >> (slot << 4)) +#define M8XX_PCMCIA_CD1(slot) (0x08000000 >> (slot << 4)) +#define M8XX_PCMCIA_BVD2(slot) (0x04000000 >> (slot << 4)) +#define M8XX_PCMCIA_BVD1(slot) (0x02000000 >> (slot << 4)) +#define M8XX_PCMCIA_RDY(slot) (0x01000000 >> (slot << 4)) +#define M8XX_PCMCIA_RDY_L(slot) (0x00800000 >> (slot << 4)) +#define M8XX_PCMCIA_RDY_H(slot) (0x00400000 >> (slot << 4)) +#define M8XX_PCMCIA_RDY_R(slot) (0x00200000 >> (slot << 4)) +#define M8XX_PCMCIA_RDY_F(slot) (0x00100000 >> (slot << 4)) +#define M8XX_PCMCIA_MASK(slot) (0xFFFF0000 >> (slot << 4)) + +#define M8XX_PCMCIA_POR_VALID 0x00000001 +#define M8XX_PCMCIA_POR_WRPROT 0x00000002 +#define M8XX_PCMCIA_POR_ATTRMEM 0x00000010 +#define M8XX_PCMCIA_POR_IO 0x00000018 +#define M8XX_PCMCIA_POR_16BIT 0x00000040 + +#define M8XX_PGCRX(slot) m8xx_pgcrx[slot] + +#define M8XX_PGCRX_CXOE 0x00000080 +#define M8XX_PGCRX_CXRESET 0x00000040 + +/* we keep one lookup table per socket to check flags */ + +#define PCMCIA_EVENTS_MAX 5 /* 4 max at a time + termination */ + +struct event_table { + u32 regbit; + u32 eventbit; +}; + +struct socket_info { + void (*handler)(void *info, u32 events); + void *info; + + u32 slot; + + socket_state_t state; + struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO]; + struct pccard_io_map io_win[PCMCIA_IO_WIN_NO]; + struct event_table events[PCMCIA_EVENTS_MAX]; + struct pcmcia_socket socket; +}; + +static struct socket_info socket[PCMCIA_SOCKETS_NO]; + +/* + * Search this table to see if the windowsize is + * supported... + */ + +#define M8XX_SIZES_NO 32 + +static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] = +{ + 0x00000001, 0x00000002, 0x00000008, 0x00000004, + 0x00000080, 0x00000040, 0x00000010, 0x00000020, + 0x00008000, 0x00004000, 0x00001000, 0x00002000, + 0x00000100, 0x00000200, 0x00000800, 0x00000400, + + 0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x01000000, 0x02000000, 0xffffffff, 0x04000000, + 0x00010000, 0x00020000, 0x00080000, 0x00040000, + 0x00800000, 0x00400000, 0x00100000, 0x00200000 +}; + +/* ------------------------------------------------------------------------- */ + +static irqreturn_t m8xx_interrupt(int irq, void *dev, struct pt_regs *regs); + +#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */ + +/* ------------------------------------------------------------------------- */ +/* board specific stuff: */ +/* voltage_set(), hardware_enable() and hardware_disable() */ +/* ------------------------------------------------------------------------- */ +/* RPX Boards from Embedded Planet */ + +#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE) + +/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks. + * SYPCR is write once only, therefore must the slowest memory be faster + * than the bus monitor or we will get a machine check due to the bus timeout. + */ + +#define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE" + +#undef PCMCIA_BMT_LIMIT +#define PCMCIA_BMT_LIMIT (6*8) + +static int voltage_set(int slot, int vcc, int vpp) +{ + u32 reg = 0; + + switch(vcc) { + case 0: break; + case 33: + reg |= BCSR1_PCVCTL4; + break; + case 50: + reg |= BCSR1_PCVCTL5; + break; + default: + return 1; + } + + switch(vpp) { + case 0: break; + case 33: + case 50: + if(vcc == vpp) + reg |= BCSR1_PCVCTL6; + else + return 1; + break; + case 120: + reg |= BCSR1_PCVCTL7; + default: + return 1; + } + + if(!((vcc == 50) || (vcc == 0))) + return 1; + + /* first, turn off all power */ + + out_be32(((u32 *)RPX_CSR_ADDR), in_be32(((u32 *)RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5 | BCSR1_PCVCTL6 | BCSR1_PCVCTL7)); + + /* enable new powersettings */ + + out_be32(((u32 *)RPX_CSR_ADDR), in_be32(((u32 *)RPX_CSR_ADDR)) | reg); + + return 0; +} + +#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V +#define hardware_enable(_slot_) /* No hardware to enable */ +#define hardware_disable(_slot_) /* No hardware to disable */ + +#endif /* CONFIG_RPXCLASSIC */ + +/* FADS Boards from Motorola */ + +#if defined(CONFIG_FADS) + +#define PCMCIA_BOARD_MSG "FADS" + +static int voltage_set(int slot, int vcc, int vpp) +{ + u32 reg = 0; + + switch(vcc) { + case 0: + break; + case 33: + reg |= BCSR1_PCCVCC0; + break; + case 50: + reg |= BCSR1_PCCVCC1; + break; + default: + return 1; + } + + switch(vpp) { + case 0: + break; + case 33: + case 50: + if(vcc == vpp) + reg |= BCSR1_PCCVPP1; + else + return 1; + break; + case 120: + if ((vcc == 33) || (vcc == 50)) + reg |= BCSR1_PCCVPP0; + else + return 1; + default: + return 1; + } + + /* first, turn off all power */ + out_be32(&((u32 *)BCSR1), in_be32(&((u32 *)BCSR1)) & ~(BCSR1_PCCVCC_MASK | BCSR1_PCCVPP_MASK)); + + /* enable new powersettings */ + out_be32(&((u32 *)BCSR1), in_be32(&((u32 *)BCSR1)) | reg); + + return 0; +} + +#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V + +static void hardware_enable(int slot) +{ + out_be32(&((u32 *)BCSR1), in_be32(&((u32 *)BCSR1)) & ~BCSR1_PCCEN); +} + +static void hardware_disable(int slot) +{ + out_be32(&((u32 *)BCSR1), in_be32(&((u32 *)BCSR1)) | BCSR1_PCCEN); +} + +#endif + +/* ------------------------------------------------------------------------- */ +/* Motorola MBX860 */ + +#if defined(CONFIG_MBX) + +#define PCMCIA_BOARD_MSG "MBX" + +static int voltage_set(int slot, int vcc, int vpp) +{ + u8 reg = 0; + + switch(vcc) { + case 0: + break; + case 33: + reg |= CSR2_VCC_33; + break; + case 50: + reg |= CSR2_VCC_50; + break; + default: + return 1; + } + + switch(vpp) { + case 0: + break; + case 33: + case 50: + if(vcc == vpp) + reg |= CSR2_VPP_VCC; + else + return 1; + break; + case 120: + if ((vcc == 33) || (vcc == 50)) + reg |= CSR2_VPP_12; + else + return 1; + default: + return 1; + } + + /* first, turn off all power */ + out_8(&((u8 *)MBX_CSR2_ADDR), in_8(&((u8 *)MBX_CSR2_ADDR)) & ~(CSR2_VCC_MASK | CSR2_VPP_MASK)); + + /* enable new powersettings */ + out_8(&((u8 *)MBX_CSR2_ADDR), in_8(&((u8 *)MBX_CSR2_ADDR)) | reg); + + return 0; +} + +#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V +#define hardware_enable(_slot_) /* No hardware to enable */ +#define hardware_disable(_slot_) /* No hardware to disable */ + +#endif /* CONFIG_MBX */ + +#if defined(CONFIG_PRxK) +#include +extern volatile fpga_pc_regs *fpga_pc; + +#define PCMCIA_BOARD_MSG "MPC855T" + +static int voltage_set(int slot, int vcc, int vpp) +{ + u8 reg = 0; + u8 regread; + cpld_regs *ccpld = get_cpld(); + + switch(vcc) { + case 0: + break; + case 33: + reg |= PCMCIA_VCC_33; + break; + case 50: + reg |= PCMCIA_VCC_50; + break; + default: + return 1; + } + + switch(vpp) { + case 0: + break; + case 33: + case 50: + if(vcc == vpp) + reg |= PCMCIA_VPP_VCC; + else + return 1; + break; + case 120: + if ((vcc == 33) || (vcc == 50)) + reg |= PCMCIA_VPP_12; + else + return 1; + default: + return 1; + } + + reg = reg >> (slot << 2); + regread = in_8(&ccpld->fpga_pc_ctl); + if (reg != (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) { + /* enable new powersettings */ + regread = regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)); + out_8(&ccpld->fpga_pc_ctl, reg | regread); + msleep(100); + } + + return 0; +} + +#define socket_get(_slot_) PCMCIA_SOCKET_KEY_LV +#define hardware_enable(_slot_) /* No hardware to enable */ +#define hardware_disable(_slot_) /* No hardware to disable */ + +#endif /* CONFIG_PRxK */ + +static void m8xx_shutdown(void) +{ + u32 m, i; + struct pcmcia_win *w; + + for(i = 0; i < PCMCIA_SOCKETS_NO; i++){ + w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0; + + out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, M8XX_PCMCIA_MASK(i)); + out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) & ~M8XX_PCMCIA_MASK(i)); + + /* turn off interrupt and disable CxOE */ + out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE); + + /* turn off memory windows */ + for(m = 0; m < PCMCIA_MEM_WIN_NO; m++) { + out_be32(&w->or, 0); /* set to not valid */ + w++; + } + + /* turn off voltage */ + voltage_set(i, 0, 0); + + /* disable external hardware */ + hardware_disable(i); + } + + free_irq(pcmcia_schlvl, NULL); +} + +/* copied from tcic.c */ + +static int m8xx_drv_suspend(struct device *dev, pm_message_t state, u32 level) +{ + int ret = 0; + if (level == SUSPEND_SAVE_STATE) + ret = pcmcia_socket_dev_suspend(dev, state); + return ret; +} + +static int m8xx_drv_resume(struct device *dev, u32 level) +{ + int ret = 0; + if (level == RESUME_RESTORE_STATE) + ret = pcmcia_socket_dev_resume(dev); + return ret; +} + +static struct device_driver m8xx_driver = { + .name = "m8xx-pcmcia", + .bus = &platform_bus_type, + .suspend = m8xx_drv_suspend, + .resume = m8xx_drv_resume, +}; + +static struct platform_device m8xx_device = { + .name = "m8xx-pcmcia", + .id = 0, +}; + +static u32 pending_events[PCMCIA_SOCKETS_NO]; +static spinlock_t pending_event_lock = SPIN_LOCK_UNLOCKED; + +static irqreturn_t m8xx_interrupt(int irq, void *dev, struct pt_regs *regs) +{ + struct socket_info *s; + struct event_table *e; + unsigned int i, events, pscr, pipr, per; + + dprintk("Interrupt!\n"); + /* get interrupt sources */ + + pscr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr); + pipr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr); + per = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per); + + for(i = 0; i < PCMCIA_SOCKETS_NO; i++) { + s = &socket[i]; + e = &s->events[0]; + events = 0; + + while(e->regbit) { + if(pscr & e->regbit) + events |= e->eventbit; + + e++; + } + + /* + * report only if both card detect signals are the same + * not too nice done, + * we depend on that CD2 is the bit to the left of CD1... + */ + if(events & SS_DETECT) + if(((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^ + (pipr & M8XX_PCMCIA_CD1(i))) + { + events &= ~SS_DETECT; + } + +#ifdef PCMCIA_GLITCHY_CD + /* + * I've experienced CD problems with my ADS board. + * We make an extra check to see if there was a + * real change of Card detection. + */ + + if((events & SS_DETECT) && + ((pipr & + (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) && + (s->state.Vcc | s->state.Vpp)) { + events &= ~SS_DETECT; + /*printk( "CD glitch workaround - CD = 0x%08x!\n", + (pipr & (M8XX_PCMCIA_CD2(i) + | M8XX_PCMCIA_CD1(i))));*/ + } +#endif + + /* call the handler */ + + dprintk("slot %u: events = 0x%02x, pscr = 0x%08x, " + "pipr = 0x%08x\n", + i, events, pscr, pipr); + + if(events) { + spin_lock(&pending_event_lock); + pending_events[i] |= events; + spin_unlock(&pending_event_lock); + /* + * Turn off RDY_L bits in the PER mask on + * CD interrupt receival. + * + * They can generate bad interrupts on the + * ACS4,8,16,32. - marcelo + */ + per &= ~M8XX_PCMCIA_RDY_L(0); + per &= ~M8XX_PCMCIA_RDY_L(1); + + out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, per); + + if (events) + pcmcia_parse_events(&socket[i].socket, events); + } + } + + /* clear the interrupt sources */ + out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, pscr); + + dprintk("Interrupt done.\n"); + + return IRQ_HANDLED; +} + +static u32 m8xx_get_graycode(u32 size) +{ + u32 k; + + for(k = 0; k < M8XX_SIZES_NO; k++) + if(m8xx_size_to_gray[k] == size) + break; + + if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1)) + k = -1; + + return k; +} + +static u32 m8xx_get_speed(u32 ns, u32 is_io) +{ + u32 reg, clocks, psst, psl, psht; + + if(!ns) { + + /* + * We get called with IO maps setup to 0ns + * if not specified by the user. + * They should be 255ns. + */ + + if(is_io) + ns = 255; + else + ns = 100; /* fast memory if 0 */ + } + + /* + * In PSST, PSL, PSHT fields we tell the controller + * timing parameters in CLKOUT clock cycles. + * CLKOUT is the same as GCLK2_50. + */ + +/* how we want to adjust the timing - in percent */ + +#define ADJ 180 /* 80 % longer accesstime - to be sure */ + + clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000; + clocks = (clocks * ADJ) / (100*1000); + if(clocks >= PCMCIA_BMT_LIMIT) { + printk( "Max access time limit reached\n"); + clocks = PCMCIA_BMT_LIMIT-1; + } + + psst = clocks / 7; /* setup time */ + psht = clocks / 7; /* hold time */ + psl = (clocks * 5) / 7; /* strobe length */ + + psst += clocks - (psst + psht + psl); + + reg = psst << 12; + reg |= psl << 7; + reg |= psht << 16; + + return reg; +} + +static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value) +{ + int lsock = container_of(sock, struct socket_info, socket)->slot; + struct socket_info *s = &socket[lsock]; + unsigned int pipr, reg; + + pipr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr); + + *value = ((pipr & (M8XX_PCMCIA_CD1(lsock) + | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0; + *value |= (pipr & M8XX_PCMCIA_WP(lsock)) ? SS_WRPROT : 0; + + if (s->state.flags & SS_IOCARD) + *value |= (pipr & M8XX_PCMCIA_BVD1(lsock)) ? SS_STSCHG : 0; + else { + *value |= (pipr & M8XX_PCMCIA_RDY(lsock)) ? SS_READY : 0; + *value |= (pipr & M8XX_PCMCIA_BVD1(lsock)) ? SS_BATDEAD : 0; + *value |= (pipr & M8XX_PCMCIA_BVD2(lsock)) ? SS_BATWARN : 0; + } + + if (s->state.Vcc | s->state.Vpp) + *value |= SS_POWERON; + + /* + * Voltage detection: + * This driver only supports 16-Bit pc-cards. + * Cardbus is not handled here. + * + * To determine what voltage to use we must read the VS1 and VS2 pin. + * Depending on what socket type is present, + * different combinations mean different things. + * + * Card Key Socket Key VS1 VS2 Card Vcc for CIS parse + * + * 5V 5V, LV* NC NC 5V only 5V (if available) + * + * 5V 5V, LV* GND NC 5 or 3.3V as low as possible + * + * 5V 5V, LV* GND GND 5, 3.3, x.xV as low as possible + * + * LV* 5V - - shall not fit into socket + * + * LV* LV* GND NC 3.3V only 3.3V + * + * LV* LV* NC GND x.xV x.xV (if avail.) + * + * LV* LV* GND GND 3.3 or x.xV as low as possible + * + * *LV means Low Voltage + * + * + * That gives us the following table: + * + * Socket VS1 VS2 Voltage + * + * 5V NC NC 5V + * 5V NC GND none (should not be possible) + * 5V GND NC >= 3.3V + * 5V GND GND >= x.xV + * + * LV NC NC 5V (if available) + * LV NC GND x.xV (if available) + * LV GND NC 3.3V + * LV GND GND >= x.xV + * + * So, how do I determine if I have a 5V or a LV + * socket on my board? Look at the socket! + * + * + * Socket with 5V key: + * ++--------------------------------------------+ + * || | + * || || + * || || + * | | + * +---------------------------------------------+ + * + * Socket with LV key: + * ++--------------------------------------------+ + * || | + * | || + * | || + * | | + * +---------------------------------------------+ + * + * + * With other words - LV only cards does not fit + * into the 5V socket! + */ + + /* read out VS1 and VS2 */ + + reg = (pipr & M8XX_PCMCIA_VS_MASK(lsock)) + >> M8XX_PCMCIA_VS_SHIFT(lsock); + + if(socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) { + switch(reg) { + case 1: + *value |= SS_3VCARD; + break; /* GND, NC - 3.3V only */ + case 2: + *value |= SS_XVCARD; + break; /* NC. GND - x.xV only */ + }; + } + + dprintk("GetStatus(%d) = %#2.2x\n", lsock, *value); + return 0; +} + +static int m8xx_get_socket(struct pcmcia_socket *sock, socket_state_t *state) +{ + int lsock = container_of(sock, struct socket_info, socket)->slot; + *state = socket[lsock].state; /* copy the whole structure */ + + dprintk("GetSocket(%d) = flags %#3.3x, Vcc %d, Vpp %d, " + "io_irq %d, csc_mask %#2.2x\n", lsock, state->flags, + state->Vcc, state->Vpp, state->io_irq, state->csc_mask); + return 0; +} + +static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state) +{ + int lsock = container_of(sock, struct socket_info, socket)->slot; + struct socket_info *s = &socket[lsock]; + struct event_table *e; + unsigned int reg; + unsigned long flags; + + dprintk( "SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, " + "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags, + state->Vcc, state->Vpp, state->io_irq, state->csc_mask); + + /* First, set voltage - bail out if invalid */ + if(voltage_set(lsock, state->Vcc, state->Vpp)) + return -EINVAL; + + /* Take care of reset... */ + if(state->flags & SS_RESET) + out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */ + else + out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET); + + /* ... and output enable. */ + + /* The CxOE signal is connected to a 74541 on the ADS. + I guess most other boards used the ADS as a reference. + I tried to control the CxOE signal with SS_OUTPUT_ENA, + but the reset signal seems connected via the 541. + If the CxOE is left high are some signals tristated and + no pullups are present -> the cards act wierd. + So right now the buffers are enabled if the power is on. */ + + if(state->Vcc || state->Vpp) + out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */ + else + out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE); + + /* + * We'd better turn off interrupts before + * we mess with the events-table.. + */ + + spin_lock_irqsave(&events_lock, flags); + + /* + * Play around with the interrupt mask to be able to + * give the events the generic pcmcia driver wants us to. + */ + + e = &s->events[0]; + reg = 0; + + if(state->csc_mask & SS_DETECT) { + e->eventbit = SS_DETECT; + reg |= e->regbit = (M8XX_PCMCIA_CD2(lsock) + | M8XX_PCMCIA_CD1(lsock)); + e++; + } + if(state->flags & SS_IOCARD) { + /* + * I/O card + */ + if(state->csc_mask & SS_STSCHG) { + e->eventbit = SS_STSCHG; + reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock); + e++; + } + /* + * If io_irq is non-zero we should enable irq. + */ + if(state->io_irq) { + out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | mk_int_int_mask(state->io_irq) << 24); + /* + * Strange thing here: + * The manual does not tell us which interrupt + * the sources generate. + * Anyhow, I found out that RDY_L generates IREQLVL. + * + * We use level triggerd interrupts, and they don't + * have to be cleared in PSCR in the interrupt handler. + */ + reg |= M8XX_PCMCIA_RDY_L(lsock); + } + else + out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff); + } + else { + /* + * Memory card + */ + if(state->csc_mask & SS_BATDEAD) { + e->eventbit = SS_BATDEAD; + reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock); + e++; + } + if(state->csc_mask & SS_BATWARN) { + e->eventbit = SS_BATWARN; + reg |= e->regbit = M8XX_PCMCIA_BVD2(lsock); + e++; + } + /* What should I trigger on - low/high,raise,fall? */ + if(state->csc_mask & SS_READY) { + e->eventbit = SS_READY; + reg |= e->regbit = 0; //?? + e++; + } + } + + e->regbit = 0; /* terminate list */ + + /* + * Clear the status changed . + * Port A and Port B share the same port. + * Writing ones will clear the bits. + */ + + out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, reg); + + /* + * Write the mask. + * Port A and Port B share the same port. + * Need for read-modify-write. + * Ones will enable the interrupt. + */ + + /* + reg |= ((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per + & M8XX_PCMCIA_MASK(lsock); + */ + + reg |= in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) & + (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1)); + + out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, reg); + + spin_unlock_irqrestore(&events_lock, flags); + + /* copy the struct and modify the copy */ + + s->state = *state; + + return 0; +} + +static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) +{ + int lsock = container_of(sock, struct socket_info, socket)->slot; + + struct socket_info *s = &socket[lsock]; + struct pcmcia_win *w; + unsigned int reg, winnr; + +#define M8XX_SIZE (io->stop - io->start + 1) +#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start) + + dprintk( "SetIOMap(%d, %d, %#2.2x, %d ns, " + "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags, + io->speed, io->start, io->stop); + + if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff) + || (io->stop > 0xffff) || (io->stop < io->start)) + return -EINVAL; + + if((reg = m8xx_get_graycode(M8XX_SIZE)) == -1) + return -EINVAL; + + if(io->flags & MAP_ACTIVE) { + + dprintk( "io->flags & MAP_ACTIVE\n"); + + winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO) + + (lsock * PCMCIA_IO_WIN_NO) + io->map; + + /* setup registers */ + + w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0; + w += winnr; + + out_be32(&w->or, 0); /* turn off window first */ + out_be32(&w->br, M8XX_BASE); + + reg <<= 27; + reg |= M8XX_PCMCIA_POR_IO |(lsock << 2); + + reg |= m8xx_get_speed(io->speed, 1); + + if(io->flags & MAP_WRPROT) + reg |= M8XX_PCMCIA_POR_WRPROT; + + /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ))*/ + if(io->flags & MAP_16BIT) + reg |= M8XX_PCMCIA_POR_16BIT; + + if(io->flags & MAP_ACTIVE) + reg |= M8XX_PCMCIA_POR_VALID; + + out_be32(&w->or, reg); + + dprintk("Socket %u: Mapped io window %u at %#8.8x, " + "OR = %#8.8x.\n", lsock, io->map, w->br, w->or); + } else { + /* shutdown IO window */ + winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO) + + (lsock * PCMCIA_IO_WIN_NO) + io->map; + + /* setup registers */ + + w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0; + w += winnr; + + out_be32(&w->or, 0); /* turn off window */ + out_be32(&w->br, 0); /* turn off base address */ + + dprintk("Socket %u: Unmapped io window %u at %#8.8x, " + "OR = %#8.8x.\n", lsock, io->map, w->br, w->or); + } + + /* copy the struct and modify the copy */ + s->io_win[io->map] = *io; + s->io_win[io->map].flags &= (MAP_WRPROT + | MAP_16BIT + | MAP_ACTIVE); + dprintk("SetIOMap exit\n"); + + return 0; +} + +static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *mem) +{ + int lsock = container_of(sock, struct socket_info, socket)->slot; + struct socket_info *s = &socket[lsock]; + struct pcmcia_win *w; + struct pccard_mem_map *old; + unsigned int reg, winnr; + + dprintk( "SetMemMap(%d, %d, %#2.2x, %d ns, " + "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags, + mem->speed, mem->static_start, mem->card_start); + + if ((mem->map >= PCMCIA_MEM_WIN_NO) +// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE) + || (mem->card_start >= 0x04000000) + || (mem->static_start & 0xfff) /* 4KByte resolution */ + || (mem->card_start & 0xfff)) + return -EINVAL; + + if((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) { + printk( "Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE); + return -EINVAL; + } + reg <<= 27; + + winnr = (lsock * PCMCIA_MEM_WIN_NO) + mem->map; + + /* Setup the window in the pcmcia controller */ + + w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0; + w += winnr; + + reg |= lsock << 2; + + reg |= m8xx_get_speed(mem->speed, 0); + + if(mem->flags & MAP_ATTRIB) + reg |= M8XX_PCMCIA_POR_ATTRMEM; + + if(mem->flags & MAP_WRPROT) + reg |= M8XX_PCMCIA_POR_WRPROT; + + if(mem->flags & MAP_16BIT) + reg |= M8XX_PCMCIA_POR_16BIT; + + if(mem->flags & MAP_ACTIVE) + reg |= M8XX_PCMCIA_POR_VALID; + + out_be32(&w->or, reg); + + dprintk("Socket %u: Mapped memory window %u at %#8.8x, " + "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or); + + if(mem->flags & MAP_ACTIVE) { + /* get the new base address */ + mem->static_start = PCMCIA_MEM_WIN_BASE + + (PCMCIA_MEM_WIN_SIZE * winnr) + + mem->card_start; + } + + dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, " + "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags, + mem->speed, mem->static_start, mem->card_start); + + /* copy the struct and modify the copy */ + + old = &s->mem_win[mem->map]; + + *old = *mem; + old->flags &= (MAP_ATTRIB + | MAP_WRPROT + | MAP_16BIT + | MAP_ACTIVE); + + return 0; +} + +static int m8xx_sock_init(struct pcmcia_socket *sock) +{ + int i; + pccard_io_map io = { 0, 0, 0, 0, 1 }; + pccard_mem_map mem = { 0, 0, 0, 0, 0, 0 }; + + dprintk( "sock_init(%d)\n", s); + + m8xx_set_socket(sock, &dead_socket); + for (i = 0; i < PCMCIA_IO_WIN_NO; i++) { + io.map = i; + m8xx_set_io_map(sock, &io); + } + for (i = 0; i < PCMCIA_MEM_WIN_NO; i++) { + mem.map = i; + m8xx_set_mem_map(sock, &mem); + } + + return 0; + +} + +static int m8xx_suspend(struct pcmcia_socket *sock) +{ + return m8xx_set_socket(sock, &dead_socket); +} + +static struct pccard_operations m8xx_services = { + .init = m8xx_sock_init, + .suspend = m8xx_suspend, + .get_status = m8xx_get_status, + .get_socket = m8xx_get_socket, + .set_socket = m8xx_set_socket, + .set_io_map = m8xx_set_io_map, + .set_mem_map = m8xx_set_mem_map, +}; + +static int __init m8xx_init(void) +{ + struct pcmcia_win *w; + unsigned int i,m; + + pcmcia_info("%s\n", version); + + if (driver_register(&m8xx_driver)) + return -1; + + pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG + " with IRQ %u.\n", pcmcia_schlvl); + + /* Configure Status change interrupt */ + + if(request_irq(pcmcia_schlvl, m8xx_interrupt, 0, + "m8xx_pcmcia", NULL)) { + pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n", + pcmcia_schlvl); + return -1; + } + + w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0; + + out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, + M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1)); + + out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, + in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) & + ~(M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1))); + +/* connect interrupt and disable CxOE */ + + out_be32(M8XX_PGCRX(0), M8XX_PGCRX_CXOE | (mk_int_int_mask(pcmcia_schlvl) << 16)); + out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(pcmcia_schlvl) << 16)); + +/* intialize the fixed memory windows */ + + for(i = 0; i < PCMCIA_SOCKETS_NO; i++){ + for(m = 0; m < PCMCIA_MEM_WIN_NO; m++) { + out_be32(&w->br, PCMCIA_MEM_WIN_BASE + + (PCMCIA_MEM_WIN_SIZE + * (m + i * PCMCIA_MEM_WIN_NO))); + + out_be32(&w->or, 0); /* set to not valid */ + + w++; + } + } + +/* turn off voltage */ + voltage_set(0, 0, 0); + voltage_set(1, 0, 0); + +/* Enable external hardware */ + hardware_enable(0); + hardware_enable(1); + + platform_device_register(&m8xx_device); + + for (i = 0 ; i < PCMCIA_SOCKETS_NO; i++) { + socket[i].slot = i; + socket[i].socket.owner = THIS_MODULE; + socket[i].socket.features = SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP; + socket[i].socket.irq_mask = 0x000; + socket[i].socket.map_size = 0x1000; + socket[i].socket.io_offset = 0; + socket[i].socket.pci_irq = i ? 7 : 9; + socket[i].socket.ops = &m8xx_services; + socket[i].socket.resource_ops = &pccard_nonstatic_ops; + socket[i].socket.cb_dev = NULL; + socket[i].socket.dev.dev = &m8xx_device.dev; + } + + for (i = 0; i < PCMCIA_SOCKETS_NO; i++) + pcmcia_register_socket(&socket[i].socket); + + return 0; +} + +static void __exit m8xx_exit(void) +{ + int i; + + for (i = 0; i < PCMCIA_SOCKETS_NO; i++) + pcmcia_unregister_socket(&socket[i].socket); + + m8xx_shutdown(); + + platform_device_unregister(&m8xx_device); + driver_unregister(&m8xx_driver); +} + +module_init(m8xx_init); +module_exit(m8xx_exit); -- cgit 1.2.3-korg