From ddae41be6145f5f9cb4e6df35661a09121b90672 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 16 Nov 2005 13:41:28 -0800 Subject: [PATCH] USB: reorg some functions out of the main usb.c file This will make the dynamic-id stuff easier to do, as it will be self-contained. No logic was changed at all. Signed-off-by: Greg Kroah-Hartman --- Documentation/DocBook/usb.tmpl | 1 + drivers/usb/core/Makefile | 2 +- drivers/usb/core/driver.c | 338 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/core/usb.c | 311 ------------------------------------- drivers/usb/core/usb.h | 3 + 5 files changed, 343 insertions(+), 312 deletions(-) create mode 100644 drivers/usb/core/driver.c diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl index 15ce0f21e5e0c..320af25de3a27 100644 --- a/Documentation/DocBook/usb.tmpl +++ b/Documentation/DocBook/usb.tmpl @@ -253,6 +253,7 @@ !Edrivers/usb/core/urb.c !Edrivers/usb/core/message.c !Edrivers/usb/core/file.c +!Edrivers/usb/core/driver.c !Edrivers/usb/core/usb.c !Edrivers/usb/core/hub.c diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index 86d5c380892d0..28329ddf187c2 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -2,7 +2,7 @@ # Makefile for USB Core files and filesystem # -usbcore-objs := usb.o hub.o hcd.o urb.o message.o \ +usbcore-objs := usb.o hub.o hcd.o urb.o message.o driver.o \ config.o file.o buffer.o sysfs.o devio.o notify.o ifeq ($(CONFIG_PCI),y) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c new file mode 100644 index 0000000000000..921a21be651df --- /dev/null +++ b/drivers/usb/core/driver.c @@ -0,0 +1,338 @@ +/* + * drivers/usb/driver.c - most of the driver model stuff for usb + * + * (C) Copyright 2005 Greg Kroah-Hartman + * + * based on drivers/usb/usb.c which had the following copyrights: + * (C) Copyright Linus Torvalds 1999 + * (C) Copyright Johannes Erdfelt 1999-2001 + * (C) Copyright Andreas Gal 1999 + * (C) Copyright Gregory P. Smith 1999 + * (C) Copyright Deti Fliegl 1999 (new USB architecture) + * (C) Copyright Randy Dunlap 2000 + * (C) Copyright David Brownell 2000-2004 + * (C) Copyright Yggdrasil Computing, Inc. 2000 + * (usb_device_id matching changes by Adam J. Richter) + * (C) Copyright Greg Kroah-Hartman 2002-2003 + * + * NOTE! This is not actually a driver at all, rather this is + * just a collection of helper routines that implement the + * generic USB things that the real drivers can use.. + * + */ + +#include +#include +#include +#include "hcd.h" +#include "usb.h" + +static int generic_probe(struct device *dev) +{ + return 0; +} +static int generic_remove(struct device *dev) +{ + struct usb_device *udev = to_usb_device(dev); + + /* if this is only an unbind, not a physical disconnect, then + * unconfigure the device */ + if (udev->state == USB_STATE_CONFIGURED) + usb_set_configuration(udev, 0); + + /* in case the call failed or the device was suspended */ + if (udev->state >= USB_STATE_CONFIGURED) + usb_disable_device(udev, 0); + return 0; +} + +struct device_driver usb_generic_driver = { + .owner = THIS_MODULE, + .name = "usb", + .bus = &usb_bus_type, + .probe = generic_probe, + .remove = generic_remove, +}; + +/* Fun hack to determine if the struct device is a + * usb device or a usb interface. */ +int usb_generic_driver_data; + +/* called from driver core with usb_bus_type.subsys writelock */ +static int usb_probe_interface(struct device *dev) +{ + struct usb_interface * intf = to_usb_interface(dev); + struct usb_driver * driver = to_usb_driver(dev->driver); + const struct usb_device_id *id; + int error = -ENODEV; + + dev_dbg(dev, "%s\n", __FUNCTION__); + + if (!driver->probe) + return error; + /* FIXME we'd much prefer to just resume it ... */ + if (interface_to_usbdev(intf)->state == USB_STATE_SUSPENDED) + return -EHOSTUNREACH; + + id = usb_match_id(intf, driver->id_table); + if (id) { + dev_dbg(dev, "%s - got id\n", __FUNCTION__); + + /* Interface "power state" doesn't correspond to any hardware + * state whatsoever. We use it to record when it's bound to + * a driver that may start I/0: it's not frozen/quiesced. + */ + mark_active(intf); + intf->condition = USB_INTERFACE_BINDING; + error = driver->probe(intf, id); + if (error) { + mark_quiesced(intf); + intf->condition = USB_INTERFACE_UNBOUND; + } else + intf->condition = USB_INTERFACE_BOUND; + } + + return error; +} + +/* called from driver core with usb_bus_type.subsys writelock */ +static int usb_unbind_interface(struct device *dev) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_driver *driver = to_usb_driver(intf->dev.driver); + + intf->condition = USB_INTERFACE_UNBINDING; + + /* release all urbs for this interface */ + usb_disable_interface(interface_to_usbdev(intf), intf); + + if (driver && driver->disconnect) + driver->disconnect(intf); + + /* reset other interface state */ + usb_set_interface(interface_to_usbdev(intf), + intf->altsetting[0].desc.bInterfaceNumber, + 0); + usb_set_intfdata(intf, NULL); + intf->condition = USB_INTERFACE_UNBOUND; + mark_quiesced(intf); + + return 0; +} + +/** + * usb_match_id - find first usb_device_id matching device or interface + * @interface: the interface of interest + * @id: array of usb_device_id structures, terminated by zero entry + * + * usb_match_id searches an array of usb_device_id's and returns + * the first one matching the device or interface, or null. + * This is used when binding (or rebinding) a driver to an interface. + * Most USB device drivers will use this indirectly, through the usb core, + * but some layered driver frameworks use it directly. + * These device tables are exported with MODULE_DEVICE_TABLE, through + * modutils, to support the driver loading functionality of USB hotplugging. + * + * What Matches: + * + * The "match_flags" element in a usb_device_id controls which + * members are used. If the corresponding bit is set, the + * value in the device_id must match its corresponding member + * in the device or interface descriptor, or else the device_id + * does not match. + * + * "driver_info" is normally used only by device drivers, + * but you can create a wildcard "matches anything" usb_device_id + * as a driver's "modules.usbmap" entry if you provide an id with + * only a nonzero "driver_info" field. If you do this, the USB device + * driver's probe() routine should use additional intelligence to + * decide whether to bind to the specified interface. + * + * What Makes Good usb_device_id Tables: + * + * The match algorithm is very simple, so that intelligence in + * driver selection must come from smart driver id records. + * Unless you have good reasons to use another selection policy, + * provide match elements only in related groups, and order match + * specifiers from specific to general. Use the macros provided + * for that purpose if you can. + * + * The most specific match specifiers use device descriptor + * data. These are commonly used with product-specific matches; + * the USB_DEVICE macro lets you provide vendor and product IDs, + * and you can also match against ranges of product revisions. + * These are widely used for devices with application or vendor + * specific bDeviceClass values. + * + * Matches based on device class/subclass/protocol specifications + * are slightly more general; use the USB_DEVICE_INFO macro, or + * its siblings. These are used with single-function devices + * where bDeviceClass doesn't specify that each interface has + * its own class. + * + * Matches based on interface class/subclass/protocol are the + * most general; they let drivers bind to any interface on a + * multiple-function device. Use the USB_INTERFACE_INFO + * macro, or its siblings, to match class-per-interface style + * devices (as recorded in bDeviceClass). + * + * Within those groups, remember that not all combinations are + * meaningful. For example, don't give a product version range + * without vendor and product IDs; or specify a protocol without + * its associated class and subclass. + */ +const struct usb_device_id *usb_match_id(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_host_interface *intf; + struct usb_device *dev; + + /* proc_connectinfo in devio.c may call us with id == NULL. */ + if (id == NULL) + return NULL; + + intf = interface->cur_altsetting; + dev = interface_to_usbdev(interface); + + /* It is important to check that id->driver_info is nonzero, + since an entry that is all zeroes except for a nonzero + id->driver_info is the way to create an entry that + indicates that the driver want to examine every + device and interface. */ + for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass || + id->driver_info; id++) { + + if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && + id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && + id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) + continue; + + /* No need to test id->bcdDevice_lo != 0, since 0 is never + greater than any unsigned number. */ + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && + (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && + (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && + (id->bDeviceClass != dev->descriptor.bDeviceClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && + (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && + (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && + (id->bInterfaceClass != intf->desc.bInterfaceClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && + (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && + (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol)) + continue; + + return id; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(usb_match_id); + +int usb_device_match(struct device *dev, struct device_driver *drv) +{ + struct usb_interface *intf; + struct usb_driver *usb_drv; + const struct usb_device_id *id; + + /* check for generic driver, which we don't match any device with */ + if (drv == &usb_generic_driver) + return 0; + + intf = to_usb_interface(dev); + usb_drv = to_usb_driver(drv); + + id = usb_match_id(intf, usb_drv->id_table); + if (id) + return 1; + + return 0; +} + +/** + * usb_register - register a USB driver + * @new_driver: USB operations for the driver + * + * Registers a USB driver with the USB core. The list of unattached + * interfaces will be rescanned whenever a new driver is added, allowing + * the new driver to attach to any recognized devices. + * Returns a negative error code on failure and 0 on success. + * + * NOTE: if you want your driver to use the USB major number, you must call + * usb_register_dev() to enable that functionality. This function no longer + * takes care of that. + */ +int usb_register(struct usb_driver *new_driver) +{ + int retval = 0; + + if (usb_disabled()) + return -ENODEV; + + new_driver->driver.name = (char *)new_driver->name; + new_driver->driver.bus = &usb_bus_type; + new_driver->driver.probe = usb_probe_interface; + new_driver->driver.remove = usb_unbind_interface; + new_driver->driver.owner = new_driver->owner; + + usb_lock_all_devices(); + retval = driver_register(&new_driver->driver); + usb_unlock_all_devices(); + + if (!retval) { + pr_info("%s: registered new driver %s\n", + usbcore_name, new_driver->name); + usbfs_update_special(); + } else { + printk(KERN_ERR "%s: error %d registering driver %s\n", + usbcore_name, retval, new_driver->name); + } + + return retval; +} +EXPORT_SYMBOL_GPL(usb_register); + +/** + * usb_deregister - unregister a USB driver + * @driver: USB operations of the driver to unregister + * Context: must be able to sleep + * + * Unlinks the specified driver from the internal USB driver list. + * + * NOTE: If you called usb_register_dev(), you still need to call + * usb_deregister_dev() to clean up your driver's allocated minor numbers, + * this * call will no longer do it for you. + */ +void usb_deregister(struct usb_driver *driver) +{ + pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); + + usb_lock_all_devices(); + driver_unregister(&driver->driver); + usb_unlock_all_devices(); + + usbfs_update_special(); +} +EXPORT_SYMBOL_GPL(usb_deregister); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index e80ef94678255..294e9f1274779 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -52,161 +52,6 @@ static int nousb; /* Disable USB when built into kernel image */ static DECLARE_RWSEM(usb_all_devices_rwsem); -static int generic_probe (struct device *dev) -{ - return 0; -} -static int generic_remove (struct device *dev) -{ - struct usb_device *udev = to_usb_device(dev); - - /* if this is only an unbind, not a physical disconnect, then - * unconfigure the device */ - if (udev->state == USB_STATE_CONFIGURED) - usb_set_configuration(udev, 0); - - /* in case the call failed or the device was suspended */ - if (udev->state >= USB_STATE_CONFIGURED) - usb_disable_device(udev, 0); - return 0; -} - -static struct device_driver usb_generic_driver = { - .owner = THIS_MODULE, - .name = "usb", - .bus = &usb_bus_type, - .probe = generic_probe, - .remove = generic_remove, -}; - -static int usb_generic_driver_data; - -/* called from driver core with usb_bus_type.subsys writelock */ -static int usb_probe_interface(struct device *dev) -{ - struct usb_interface * intf = to_usb_interface(dev); - struct usb_driver * driver = to_usb_driver(dev->driver); - const struct usb_device_id *id; - int error = -ENODEV; - - dev_dbg(dev, "%s\n", __FUNCTION__); - - if (!driver->probe) - return error; - /* FIXME we'd much prefer to just resume it ... */ - if (interface_to_usbdev(intf)->state == USB_STATE_SUSPENDED) - return -EHOSTUNREACH; - - id = usb_match_id (intf, driver->id_table); - if (id) { - dev_dbg (dev, "%s - got id\n", __FUNCTION__); - - /* Interface "power state" doesn't correspond to any hardware - * state whatsoever. We use it to record when it's bound to - * a driver that may start I/0: it's not frozen/quiesced. - */ - mark_active(intf); - intf->condition = USB_INTERFACE_BINDING; - error = driver->probe (intf, id); - if (error) { - mark_quiesced(intf); - intf->condition = USB_INTERFACE_UNBOUND; - } else - intf->condition = USB_INTERFACE_BOUND; - } - - return error; -} - -/* called from driver core with usb_bus_type.subsys writelock */ -static int usb_unbind_interface(struct device *dev) -{ - struct usb_interface *intf = to_usb_interface(dev); - struct usb_driver *driver = to_usb_driver(intf->dev.driver); - - intf->condition = USB_INTERFACE_UNBINDING; - - /* release all urbs for this interface */ - usb_disable_interface(interface_to_usbdev(intf), intf); - - if (driver && driver->disconnect) - driver->disconnect(intf); - - /* reset other interface state */ - usb_set_interface(interface_to_usbdev(intf), - intf->altsetting[0].desc.bInterfaceNumber, - 0); - usb_set_intfdata(intf, NULL); - intf->condition = USB_INTERFACE_UNBOUND; - mark_quiesced(intf); - - return 0; -} - -/** - * usb_register - register a USB driver - * @new_driver: USB operations for the driver - * - * Registers a USB driver with the USB core. The list of unattached - * interfaces will be rescanned whenever a new driver is added, allowing - * the new driver to attach to any recognized devices. - * Returns a negative error code on failure and 0 on success. - * - * NOTE: if you want your driver to use the USB major number, you must call - * usb_register_dev() to enable that functionality. This function no longer - * takes care of that. - */ -int usb_register(struct usb_driver *new_driver) -{ - int retval = 0; - - if (nousb) - return -ENODEV; - - new_driver->driver.name = (char *)new_driver->name; - new_driver->driver.bus = &usb_bus_type; - new_driver->driver.probe = usb_probe_interface; - new_driver->driver.remove = usb_unbind_interface; - new_driver->driver.owner = new_driver->owner; - - usb_lock_all_devices(); - retval = driver_register(&new_driver->driver); - usb_unlock_all_devices(); - - if (!retval) { - pr_info("%s: registered new driver %s\n", - usbcore_name, new_driver->name); - usbfs_update_special(); - } else { - printk(KERN_ERR "%s: error %d registering driver %s\n", - usbcore_name, retval, new_driver->name); - } - - return retval; -} - -/** - * usb_deregister - unregister a USB driver - * @driver: USB operations of the driver to unregister - * Context: must be able to sleep - * - * Unlinks the specified driver from the internal USB driver list. - * - * NOTE: If you called usb_register_dev(), you still need to call - * usb_deregister_dev() to clean up your driver's allocated minor numbers, - * this * call will no longer do it for you. - */ -void usb_deregister(struct usb_driver *driver) -{ - pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); - - usb_lock_all_devices(); - driver_unregister (&driver->driver); - usb_unlock_all_devices(); - - usbfs_update_special(); -} - /** * usb_ifnum_to_if - get the interface object with a given interface number * @dev: the device whose current configuration is considered @@ -352,138 +197,6 @@ void usb_driver_release_interface(struct usb_driver *driver, mark_quiesced(iface); } -/** - * usb_match_id - find first usb_device_id matching device or interface - * @interface: the interface of interest - * @id: array of usb_device_id structures, terminated by zero entry - * - * usb_match_id searches an array of usb_device_id's and returns - * the first one matching the device or interface, or null. - * This is used when binding (or rebinding) a driver to an interface. - * Most USB device drivers will use this indirectly, through the usb core, - * but some layered driver frameworks use it directly. - * These device tables are exported with MODULE_DEVICE_TABLE, through - * modutils and "modules.usbmap", to support the driver loading - * functionality of USB hotplugging. - * - * What Matches: - * - * The "match_flags" element in a usb_device_id controls which - * members are used. If the corresponding bit is set, the - * value in the device_id must match its corresponding member - * in the device or interface descriptor, or else the device_id - * does not match. - * - * "driver_info" is normally used only by device drivers, - * but you can create a wildcard "matches anything" usb_device_id - * as a driver's "modules.usbmap" entry if you provide an id with - * only a nonzero "driver_info" field. If you do this, the USB device - * driver's probe() routine should use additional intelligence to - * decide whether to bind to the specified interface. - * - * What Makes Good usb_device_id Tables: - * - * The match algorithm is very simple, so that intelligence in - * driver selection must come from smart driver id records. - * Unless you have good reasons to use another selection policy, - * provide match elements only in related groups, and order match - * specifiers from specific to general. Use the macros provided - * for that purpose if you can. - * - * The most specific match specifiers use device descriptor - * data. These are commonly used with product-specific matches; - * the USB_DEVICE macro lets you provide vendor and product IDs, - * and you can also match against ranges of product revisions. - * These are widely used for devices with application or vendor - * specific bDeviceClass values. - * - * Matches based on device class/subclass/protocol specifications - * are slightly more general; use the USB_DEVICE_INFO macro, or - * its siblings. These are used with single-function devices - * where bDeviceClass doesn't specify that each interface has - * its own class. - * - * Matches based on interface class/subclass/protocol are the - * most general; they let drivers bind to any interface on a - * multiple-function device. Use the USB_INTERFACE_INFO - * macro, or its siblings, to match class-per-interface style - * devices (as recorded in bDeviceClass). - * - * Within those groups, remember that not all combinations are - * meaningful. For example, don't give a product version range - * without vendor and product IDs; or specify a protocol without - * its associated class and subclass. - */ -const struct usb_device_id * -usb_match_id(struct usb_interface *interface, const struct usb_device_id *id) -{ - struct usb_host_interface *intf; - struct usb_device *dev; - - /* proc_connectinfo in devio.c may call us with id == NULL. */ - if (id == NULL) - return NULL; - - intf = interface->cur_altsetting; - dev = interface_to_usbdev(interface); - - /* It is important to check that id->driver_info is nonzero, - since an entry that is all zeroes except for a nonzero - id->driver_info is the way to create an entry that - indicates that the driver want to examine every - device and interface. */ - for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass || - id->driver_info; id++) { - - if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && - id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && - id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) - continue; - - /* No need to test id->bcdDevice_lo != 0, since 0 is never - greater than any unsigned number. */ - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && - (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && - (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && - (id->bDeviceClass != dev->descriptor.bDeviceClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && - (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && - (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && - (id->bInterfaceClass != intf->desc.bInterfaceClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && - (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && - (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol)) - continue; - - return id; - } - - return NULL; -} - - static int __find_interface(struct device * dev, void * data) { struct usb_interface ** ret = (struct usb_interface **)data; @@ -521,27 +234,6 @@ struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor) return ret ? intf : NULL; } -static int usb_device_match (struct device *dev, struct device_driver *drv) -{ - struct usb_interface *intf; - struct usb_driver *usb_drv; - const struct usb_device_id *id; - - /* check for generic driver, which we don't match any device with */ - if (drv == &usb_generic_driver) - return 0; - - intf = to_usb_interface(dev); - usb_drv = to_usb_driver(drv); - - id = usb_match_id (intf, usb_drv->id_table); - if (id) - return 1; - - return 0; -} - - #ifdef CONFIG_HOTPLUG /* @@ -1598,8 +1290,6 @@ module_exit(usb_exit); * driver modules to use. */ -EXPORT_SYMBOL(usb_register); -EXPORT_SYMBOL(usb_deregister); EXPORT_SYMBOL(usb_disabled); EXPORT_SYMBOL_GPL(usb_get_intf); @@ -1617,7 +1307,6 @@ EXPORT_SYMBOL(usb_unlock_device); EXPORT_SYMBOL(usb_driver_claim_interface); EXPORT_SYMBOL(usb_driver_release_interface); -EXPORT_SYMBOL(usb_match_id); EXPORT_SYMBOL(usb_find_interface); EXPORT_SYMBOL(usb_ifnum_to_if); EXPORT_SYMBOL(usb_altnum_to_altsetting); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 1c4a68499dce5..98e85fb4d3b7d 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -33,6 +33,9 @@ extern void usb_host_cleanup(void); extern int usb_suspend_device(struct usb_device *dev); extern int usb_resume_device(struct usb_device *dev); +extern struct device_driver usb_generic_driver; +extern int usb_generic_driver_data; +extern int usb_device_match(struct device *dev, struct device_driver *drv); /* Interfaces and their "power state" are owned by usbcore */ -- cgit 1.2.3-korg