From 4ca4b6274c30d53d22014fb6974efe2b3e52cfdc Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Sat, 17 Jun 2006 17:52:45 -0500 Subject: [POWERPC] Add the MPC8641 HPCN platform files. Signed-off-by: Xianghua Xiao Signed-off-by: Haiying Wang Signed-off-by: Wei Zhang Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/86xx/mpc8641_hpcn.h | 54 +++++ arch/powerpc/platforms/86xx/mpc86xx.h | 28 +++ arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 326 +++++++++++++++++++++++++++++ arch/powerpc/platforms/86xx/mpc86xx_smp.c | 117 +++++++++++ 4 files changed, 525 insertions(+) create mode 100644 arch/powerpc/platforms/86xx/mpc8641_hpcn.h create mode 100644 arch/powerpc/platforms/86xx/mpc86xx.h create mode 100644 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c create mode 100644 arch/powerpc/platforms/86xx/mpc86xx_smp.c diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h new file mode 100644 index 0000000000000..5042253758b7b --- /dev/null +++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h @@ -0,0 +1,54 @@ +/* + * MPC8641 HPCN board definitions + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Author: Xianghua Xiao + */ + +#ifndef __MPC8641_HPCN_H__ +#define __MPC8641_HPCN_H__ + +#include +#include + +/* PCI interrupt controller */ +#define PIRQA 3 +#define PIRQB 4 +#define PIRQC 5 +#define PIRQD 6 +#define PIRQ7 7 +#define PIRQE 9 +#define PIRQF 10 +#define PIRQG 11 +#define PIRQH 12 + +/* PCI-Express memory map */ +#define MPC86XX_PCIE_LOWER_IO 0x00000000 +#define MPC86XX_PCIE_UPPER_IO 0x00ffffff + +#define MPC86XX_PCIE_LOWER_MEM 0x80000000 +#define MPC86XX_PCIE_UPPER_MEM 0x9fffffff + +#define MPC86XX_PCIE_IO_BASE 0xe2000000 +#define MPC86XX_PCIE_MEM_OFFSET 0x00000000 + +#define MPC86XX_PCIE_IO_SIZE 0x01000000 + +#define PCIE1_CFG_ADDR_OFFSET (0x8000) +#define PCIE1_CFG_DATA_OFFSET (0x8004) + +#define PCIE2_CFG_ADDR_OFFSET (0x9000) +#define PCIE2_CFG_DATA_OFFSET (0x9004) + +#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET +#define MPC86xx_PCIE_SIZE (0x1000) + +#define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */ + +#endif /* __MPC8641_HPCN_H__ */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h new file mode 100644 index 0000000000000..e3c9e4f417d39 --- /dev/null +++ b/arch/powerpc/platforms/86xx/mpc86xx.h @@ -0,0 +1,28 @@ +/* + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MPC86XX_H__ +#define __MPC86XX_H__ + +/* + * Declaration for the various functions exported by the + * mpc86xx_* files. Mostly for use by mpc86xx_setup(). + */ + +extern int __init add_bridge(struct device_node *dev); + +extern void __init setup_indirect_pcie(struct pci_controller *hose, + u32 cfg_addr, u32 cfg_data); +extern void __init setup_indirect_pcie_nomap(struct pci_controller *hose, + void __iomem *cfg_addr, + void __iomem *cfg_data); + +extern void __init mpc86xx_smp_init(void); + +#endif /* __MPC86XX_H__ */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c new file mode 100644 index 0000000000000..483c21df181ec --- /dev/null +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -0,0 +1,326 @@ +/* + * MPC86xx HPCN board specific routines + * + * Recode: ZHANG WEI + * Initial author: Xianghua Xiao + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include "mpc86xx.h" + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +unsigned long pci_dram_offset = 0; +#endif + + +/* + * Internal interrupts are all Level Sensitive, and Positive Polarity + */ + +static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = { + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCIE1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PCIE2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */ + 0x0, /* External 0: */ + 0x0, /* External 1: */ + 0x0, /* External 2: */ + 0x0, /* External 3: */ + 0x0, /* External 4: */ + 0x0, /* External 5: */ + 0x0, /* External 6: */ + 0x0, /* External 7: */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */ + 0x0, /* External 11: */ + 0x0, + 0x0, + 0x0, + 0x0, +}; + + +void __init +mpc86xx_hpcn_init_irq(void) +{ + struct mpic *mpic1; + phys_addr_t openpic_paddr; + + /* Determine the Physical Address of the OpenPIC regs */ + openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET; + + /* Alloc mpic structure and per isu has 16 INT entries. */ + mpic1 = mpic_alloc(openpic_paddr, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250, + mpc86xx_hpcn_openpic_initsenses, + sizeof(mpc86xx_hpcn_openpic_initsenses), + " MPIC "); + BUG_ON(mpic1 == NULL); + + /* 48 Internal Interrupts */ + mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200); + mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400); + mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600); + + /* 16 External interrupts */ + mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000); + + mpic_init(mpic1); + +#ifdef CONFIG_PCI + mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL); + i8259_init(0, I8259_OFFSET); +#endif +} + + + +#ifdef CONFIG_PCI +/* + * interrupt routing + */ + +int +mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */ + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */ + {0, 0, 0, 0}, /* IDSEL 19 */ + {0, 0, 0, 0}, /* IDSEL 20 */ + {0, 0, 0, 0}, /* IDSEL 21 */ + {0, 0, 0, 0}, /* IDSEL 22 */ + {0, 0, 0, 0}, /* IDSEL 23 */ + {0, 0, 0, 0}, /* IDSEL 24 */ + {0, 0, 0, 0}, /* IDSEL 25 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, /* IDSEL 26 -- PCI Bridge*/ + {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */ + {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */ + {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */ + {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/ + {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */ + }; + + const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET; +} + + +int +mpc86xx_exclude_device(u_char bus, u_char devfn) +{ +#if !defined(CONFIG_PCI) + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; +#endif + + return PCIBIOS_SUCCESSFUL; +} +#endif /* CONFIG_PCI */ + + +static void __init +mpc86xx_hpcn_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != 0) { + unsigned int *fp; + + fp = (int *)get_property(np, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = mpc86xx_map_irq; + ppc_md.pci_exclude_device = mpc86xx_exclude_device; +#endif + + printk("MPC86xx HPCN board from Freescale Semiconductor\n"); + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + +#ifdef CONFIG_SMP + mpc86xx_smp_init(); +#endif +} + + +void +mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + uint memsize = total_memory; + const char *model = ""; + uint svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); + + root = of_find_node_by_path("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "Machine\t\t: %s\n", model); + of_node_put(root); + + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} + + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mpc86xx_hpcn_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "mpc86xx")) + return 1; /* Looks good */ + + return 0; +} + + +void +mpc86xx_restart(char *cmd) +{ + void __iomem *rstcr; + + rstcr = ioremap(get_immrbase() + MPC86XX_RSTCR_OFFSET, 0x100); + + local_irq_disable(); + + /* Assert reset request to Reset Control Register */ + out_be32(rstcr, 0x2); + + /* not reached */ +} + + +long __init +mpc86xx_time_init(void) +{ + unsigned int temp; + + /* Set the time base to zero */ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, 0); + + temp = mfspr(SPRN_HID0); + temp |= HID0_TBEN; + mtspr(SPRN_HID0, temp); + asm volatile("isync"); + + return 0; +} + + +define_machine(mpc86xx_hpcn) { + .name = "MPC86xx HPCN", + .probe = mpc86xx_hpcn_probe, + .setup_arch = mpc86xx_hpcn_setup_arch, + .init_IRQ = mpc86xx_hpcn_init_irq, + .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = mpc86xx_restart, + .time_init = mpc86xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c new file mode 100644 index 0000000000000..944ec4b714160 --- /dev/null +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -0,0 +1,117 @@ +/* + * Author: Xianghua Xiao + * Zhang Wei + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "mpc86xx.h" + +extern void __secondary_start_mpc86xx(void); +extern unsigned long __secondary_hold_acknowledge; + + +static void __init +smp_86xx_release_core(int nr) +{ + void *mcm_vaddr; + unsigned long vaddr, pcr; + + if (nr < 0 || nr >= NR_CPUS) + return; + + /* + * Startup Core #nr. + */ + mcm_vaddr = ioremap(get_immrbase() + MPC86xx_MCM_OFFSET, + MPC86xx_MCM_SIZE); + vaddr = (unsigned long)mcm_vaddr + MCM_PORT_CONFIG_OFFSET; + pcr = in_be32((volatile unsigned *)vaddr); + pcr |= 1 << (nr + 24); + out_be32((volatile unsigned *)vaddr, pcr); +} + + +static void __init +smp_86xx_kick_cpu(int nr) +{ + unsigned int save_vector; + unsigned long target, flags; + int n = 0; + volatile unsigned int *vector + = (volatile unsigned int *)(KERNELBASE + 0x100); + + if (nr < 0 || nr >= NR_CPUS) + return; + + pr_debug("smp_86xx_kick_cpu: kick CPU #%d\n", nr); + + local_irq_save(flags); + local_irq_disable(); + + /* Save reset vector */ + save_vector = *vector; + + /* Setup fake reset vector to call __secondary_start_mpc86xx. */ + target = (unsigned long) __secondary_start_mpc86xx; + create_branch((unsigned long)vector, target, BRANCH_SET_LINK); + + /* Kick that CPU */ + smp_86xx_release_core(nr); + + /* Wait a bit for the CPU to take the exception. */ + while ((__secondary_hold_acknowledge != nr) && (n++, n < 1000)) + mdelay(1); + + /* Restore the exception vector */ + *vector = save_vector; + flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); + + local_irq_restore(flags); + + pr_debug("wait CPU #%d for %d msecs.\n", nr, n); +} + + +static void __init +smp_86xx_setup_cpu(int cpu_nr) +{ + mpic_setup_this_cpu(); +} + + +struct smp_ops_t smp_86xx_ops = { + .message_pass = smp_mpic_message_pass, + .probe = smp_mpic_probe, + .kick_cpu = smp_86xx_kick_cpu, + .setup_cpu = smp_86xx_setup_cpu, + .take_timebase = smp_generic_take_timebase, + .give_timebase = smp_generic_give_timebase, +}; + + +void __init +mpc86xx_smp_init(void) +{ + smp_ops = &smp_86xx_ops; +} -- cgit 1.2.3-korg