From 10f7e7c15e6ce41799c5dba6925ae4bf8048c870 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Jun 2005 09:43:07 +1000 Subject: [PATCH] ppc64: consolidate calibrate_decr implementations pSeries and maple have almost the same code for calibrate_decr, and BPA would need yet another copy. Instead, I'm moving the code to arch/ppc64/kernel/time.c. Some of the related declarations were missing from header files, so I'm moving those as well. It makes sense to merge this with the pmac function of the same name, so we end up having just one implemetation for iSeries and one for Open Firmware based machines. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/iSeries_setup.c | 5 --- arch/ppc64/kernel/maple_setup.c | 2 +- arch/ppc64/kernel/maple_time.c | 51 ----------------------------- arch/ppc64/kernel/pSeries_setup.c | 69 +-------------------------------------- arch/ppc64/kernel/pmac_time.c | 8 +---- arch/ppc64/kernel/setup.c | 5 +-- arch/ppc64/kernel/time.c | 63 +++++++++++++++++++++++++++++++++++ include/asm-ppc64/time.h | 9 +++++ 8 files changed, 76 insertions(+), 136 deletions(-) diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/ppc64/kernel/iSeries_setup.c index b31962436fe36..86966ce76b58e 100644 --- a/arch/ppc64/kernel/iSeries_setup.c +++ b/arch/ppc64/kernel/iSeries_setup.c @@ -671,9 +671,6 @@ static void __init iSeries_bolt_kernel(unsigned long saddr, unsigned long eaddr) } } -extern unsigned long ppc_proc_freq; -extern unsigned long ppc_tb_freq; - /* * Document me. */ @@ -772,8 +769,6 @@ static void iSeries_halt(void) mf_power_off(); } -extern void setup_default_decr(void); - /* * void __init iSeries_calibrate_decr() * diff --git a/arch/ppc64/kernel/maple_setup.c b/arch/ppc64/kernel/maple_setup.c index 8cf95a27178e8..3dabedb8553b5 100644 --- a/arch/ppc64/kernel/maple_setup.c +++ b/arch/ppc64/kernel/maple_setup.c @@ -235,6 +235,6 @@ struct machdep_calls __initdata maple_md = { .get_boot_time = maple_get_boot_time, .set_rtc_time = maple_set_rtc_time, .get_rtc_time = maple_get_rtc_time, - .calibrate_decr = maple_calibrate_decr, + .calibrate_decr = generic_calibrate_decr, .progress = maple_progress, }; diff --git a/arch/ppc64/kernel/maple_time.c b/arch/ppc64/kernel/maple_time.c index 07ce7895b43d5..d65210abcd032 100644 --- a/arch/ppc64/kernel/maple_time.c +++ b/arch/ppc64/kernel/maple_time.c @@ -42,11 +42,8 @@ #define DBG(x...) #endif -extern void setup_default_decr(void); extern void GregorianDay(struct rtc_time * tm); -extern unsigned long ppc_tb_freq; -extern unsigned long ppc_proc_freq; static int maple_rtc_addr; static int maple_clock_read(int addr) @@ -176,51 +173,3 @@ void __init maple_get_boot_time(struct rtc_time *tm) maple_get_rtc_time(tm); } -/* XXX FIXME: Some sane defaults: 125 MHz timebase, 1GHz processor */ -#define DEFAULT_TB_FREQ 125000000UL -#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) - -void __init maple_calibrate_decr(void) -{ - struct device_node *cpu; - struct div_result divres; - unsigned int *fp = NULL; - - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - cpu = of_find_node_by_type(NULL, "cpu"); - - ppc_tb_freq = DEFAULT_TB_FREQ; - if (cpu != 0) - fp = (unsigned int *)get_property(cpu, "timebase-frequency", NULL); - if (fp != NULL) - ppc_tb_freq = *fp; - else - printk(KERN_ERR "WARNING: Estimating decrementer frequency (not found)\n"); - fp = NULL; - ppc_proc_freq = DEFAULT_PROC_FREQ; - if (cpu != 0) - fp = (unsigned int *)get_property(cpu, "clock-frequency", NULL); - if (fp != NULL) - ppc_proc_freq = *fp; - else - printk(KERN_ERR "WARNING: Estimating processor frequency (not found)\n"); - - of_node_put(cpu); - - printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", - ppc_tb_freq/1000000, ppc_tb_freq%1000000); - printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n", - ppc_proc_freq/1000000, ppc_proc_freq%1000000); - - tb_ticks_per_jiffy = ppc_tb_freq / HZ; - tb_ticks_per_sec = tb_ticks_per_jiffy * HZ; - tb_ticks_per_usec = ppc_tb_freq / 1000000; - tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); - div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); - tb_to_xs = divres.result_low; - - setup_default_decr(); -} diff --git a/arch/ppc64/kernel/pSeries_setup.c b/arch/ppc64/kernel/pSeries_setup.c index 6c0d1d58a552e..f9a310c0c8d72 100644 --- a/arch/ppc64/kernel/pSeries_setup.c +++ b/arch/ppc64/kernel/pSeries_setup.c @@ -84,9 +84,6 @@ extern void generic_find_legacy_serial_ports(u64 *physport, int fwnmi_active; /* TRUE if an FWNMI handler is present */ -extern unsigned long ppc_proc_freq; -extern unsigned long ppc_tb_freq; - extern void pSeries_system_reset_exception(struct pt_regs *regs); extern int pSeries_machine_check_exception(struct pt_regs *regs); @@ -482,70 +479,6 @@ static void pSeries_progress(char *s, unsigned short hex) spin_unlock(&progress_lock); } -extern void setup_default_decr(void); - -/* Some sane defaults: 125 MHz timebase, 1GHz processor */ -#define DEFAULT_TB_FREQ 125000000UL -#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) - -static void __init pSeries_calibrate_decr(void) -{ - struct device_node *cpu; - struct div_result divres; - unsigned int *fp; - int node_found; - - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - cpu = of_find_node_by_type(NULL, "cpu"); - - ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */ - node_found = 0; - if (cpu != 0) { - fp = (unsigned int *)get_property(cpu, "timebase-frequency", - NULL); - if (fp != 0) { - node_found = 1; - ppc_tb_freq = *fp; - } - } - if (!node_found) - printk(KERN_ERR "WARNING: Estimating decrementer frequency " - "(not found)\n"); - - ppc_proc_freq = DEFAULT_PROC_FREQ; - node_found = 0; - if (cpu != 0) { - fp = (unsigned int *)get_property(cpu, "clock-frequency", - NULL); - if (fp != 0) { - node_found = 1; - ppc_proc_freq = *fp; - } - } - if (!node_found) - printk(KERN_ERR "WARNING: Estimating processor frequency " - "(not found)\n"); - - of_node_put(cpu); - - printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", - ppc_tb_freq/1000000, ppc_tb_freq%1000000); - printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n", - ppc_proc_freq/1000000, ppc_proc_freq%1000000); - - tb_ticks_per_jiffy = ppc_tb_freq / HZ; - tb_ticks_per_sec = tb_ticks_per_jiffy * HZ; - tb_ticks_per_usec = ppc_tb_freq / 1000000; - tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); - div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); - tb_to_xs = divres.result_low; - - setup_default_decr(); -} - static int pSeries_check_legacy_ioport(unsigned int baseport) { struct device_node *np; @@ -604,7 +537,7 @@ struct machdep_calls __initdata pSeries_md = { .get_boot_time = pSeries_get_boot_time, .get_rtc_time = pSeries_get_rtc_time, .set_rtc_time = pSeries_set_rtc_time, - .calibrate_decr = pSeries_calibrate_decr, + .calibrate_decr = generic_calibrate_decr, .progress = pSeries_progress, .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, diff --git a/arch/ppc64/kernel/pmac_time.c b/arch/ppc64/kernel/pmac_time.c index f24827581dd7c..3059edb09cc8c 100644 --- a/arch/ppc64/kernel/pmac_time.c +++ b/arch/ppc64/kernel/pmac_time.c @@ -40,11 +40,6 @@ #define DBG(x...) #endif -extern void setup_default_decr(void); - -extern unsigned long ppc_tb_freq; -extern unsigned long ppc_proc_freq; - /* Apparently the RTC stores seconds since 1 Jan 1904 */ #define RTC_OFFSET 2082844800 @@ -161,8 +156,7 @@ void __init pmac_get_boot_time(struct rtc_time *tm) /* * Query the OF and get the decr frequency. - * This was taken from the pmac time_init() when merging the prep/pmac - * time functions. + * FIXME: merge this with generic_calibrate_decr */ void __init pmac_calibrate_decr(void) { diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 8e439a8176421..93b0ee88cda1e 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -701,9 +701,6 @@ void machine_halt(void) EXPORT_SYMBOL(machine_halt); -unsigned long ppc_proc_freq; -unsigned long ppc_tb_freq; - static int ppc64_panic_event(struct notifier_block *this, unsigned long event, void *ptr) { @@ -1117,7 +1114,7 @@ void ppc64_dump_msg(unsigned int src, const char *msg) } /* This should only be called on processor 0 during calibrate decr */ -void setup_default_decr(void) +void __init setup_default_decr(void) { struct paca_struct *lpaca = get_paca(); diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 33364a7d2cd2e..2348a75e050dc 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -107,6 +107,9 @@ void ppc_adjtimex(void); static unsigned adjusting_time = 0; +unsigned long ppc_proc_freq; +unsigned long ppc_tb_freq; + static __inline__ void timer_check_rtc(void) { /* @@ -472,6 +475,66 @@ int do_settimeofday(struct timespec *tv) EXPORT_SYMBOL(do_settimeofday); +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_MAPLE) || defined(CONFIG_PPC_BPA) +void __init generic_calibrate_decr(void) +{ + struct device_node *cpu; + struct div_result divres; + unsigned int *fp; + int node_found; + + /* + * The cpu node should have a timebase-frequency property + * to tell us the rate at which the decrementer counts. + */ + cpu = of_find_node_by_type(NULL, "cpu"); + + ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */ + node_found = 0; + if (cpu != 0) { + fp = (unsigned int *)get_property(cpu, "timebase-frequency", + NULL); + if (fp != 0) { + node_found = 1; + ppc_tb_freq = *fp; + } + } + if (!node_found) + printk(KERN_ERR "WARNING: Estimating decrementer frequency " + "(not found)\n"); + + ppc_proc_freq = DEFAULT_PROC_FREQ; + node_found = 0; + if (cpu != 0) { + fp = (unsigned int *)get_property(cpu, "clock-frequency", + NULL); + if (fp != 0) { + node_found = 1; + ppc_proc_freq = *fp; + } + } + if (!node_found) + printk(KERN_ERR "WARNING: Estimating processor frequency " + "(not found)\n"); + + of_node_put(cpu); + + printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", + ppc_tb_freq/1000000, ppc_tb_freq%1000000); + printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n", + ppc_proc_freq/1000000, ppc_proc_freq%1000000); + + tb_ticks_per_jiffy = ppc_tb_freq / HZ; + tb_ticks_per_sec = tb_ticks_per_jiffy * HZ; + tb_ticks_per_usec = ppc_tb_freq / 1000000; + tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); + div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); + tb_to_xs = divres.result_low; + + setup_default_decr(); +} +#endif + void __init time_init(void) { /* This function is only called on the boot processor */ diff --git a/include/asm-ppc64/time.h b/include/asm-ppc64/time.h index 8d6e3760ee108..c6c762cad8b0d 100644 --- a/include/asm-ppc64/time.h +++ b/include/asm-ppc64/time.h @@ -34,6 +34,15 @@ struct rtc_time; extern void to_tm(int tim, struct rtc_time * tm); extern time_t last_rtc_update; +void generic_calibrate_decr(void); +void setup_default_decr(void); + +/* Some sane defaults: 125 MHz timebase, 1GHz processor */ +extern unsigned long ppc_proc_freq; +#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) +extern unsigned long ppc_tb_freq; +#define DEFAULT_TB_FREQ 125000000UL + /* * By putting all of this stuff into a single struct we * reduce the number of cache lines touched by do_gettimeofday. -- cgit 1.2.3-korg From 773bf9c469c01f01280c9bd45ec2462dd94d08a0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Jun 2005 09:43:18 +1000 Subject: [PATCH] ppc64: rename pSeries rtc functions into rtas_* The rtc rtas functions are not pSeries specific but can also be used by BPA and other SLOF based platforms Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/pSeries_setup.c | 9 +++------ arch/ppc64/kernel/rtc.c | 6 +++--- include/asm-ppc64/rtas.h | 5 +++++ 3 files changed, 11 insertions(+), 9 deletions(-) diff --git a/arch/ppc64/kernel/pSeries_setup.c b/arch/ppc64/kernel/pSeries_setup.c index f9a310c0c8d72..c5f3ccac7cd16 100644 --- a/arch/ppc64/kernel/pSeries_setup.c +++ b/arch/ppc64/kernel/pSeries_setup.c @@ -73,9 +73,6 @@ extern void pSeries_final_fixup(void); -extern void pSeries_get_boot_time(struct rtc_time *rtc_time); -extern void pSeries_get_rtc_time(struct rtc_time *rtc_time); -extern int pSeries_set_rtc_time(struct rtc_time *rtc_time); extern void find_udbg_vterm(void); extern void system_reset_fwnmi(void); /* from head.S */ extern void machine_check_fwnmi(void); /* from head.S */ @@ -534,9 +531,9 @@ struct machdep_calls __initdata pSeries_md = { .halt = rtas_halt, .panic = rtas_os_term, .cpu_die = pSeries_mach_cpu_die, - .get_boot_time = pSeries_get_boot_time, - .get_rtc_time = pSeries_get_rtc_time, - .set_rtc_time = pSeries_set_rtc_time, + .get_boot_time = rtas_get_boot_time, + .get_rtc_time = rtas_get_rtc_time, + .set_rtc_time = rtas_set_rtc_time, .calibrate_decr = generic_calibrate_decr, .progress = pSeries_progress, .check_legacy_ioport = pSeries_check_legacy_ioport, diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c index de02aedbe0808..d729fefa0df58 100644 --- a/arch/ppc64/kernel/rtc.c +++ b/arch/ppc64/kernel/rtc.c @@ -301,7 +301,7 @@ void iSeries_get_boot_time(struct rtc_time *tm) #ifdef CONFIG_PPC_RTAS #define MAX_RTC_WAIT 5000 /* 5 sec */ #define RTAS_CLOCK_BUSY (-2) -void pSeries_get_boot_time(struct rtc_time *rtc_tm) +void rtas_get_boot_time(struct rtc_time *rtc_tm) { int ret[8]; int error, wait_time; @@ -336,7 +336,7 @@ void pSeries_get_boot_time(struct rtc_time *rtc_tm) * and if a delay is needed to read the clock. In this case we just * silently return without updating rtc_tm. */ -void pSeries_get_rtc_time(struct rtc_time *rtc_tm) +void rtas_get_rtc_time(struct rtc_time *rtc_tm) { int ret[8]; int error, wait_time; @@ -371,7 +371,7 @@ void pSeries_get_rtc_time(struct rtc_time *rtc_tm) rtc_tm->tm_year = ret[0] - 1900; } -int pSeries_set_rtc_time(struct rtc_time *tm) +int rtas_set_rtc_time(struct rtc_time *tm) { int error, wait_time; unsigned long max_wait_tb; diff --git a/include/asm-ppc64/rtas.h b/include/asm-ppc64/rtas.h index a8ab0e9db84a6..c46ceb2ffc124 100644 --- a/include/asm-ppc64/rtas.h +++ b/include/asm-ppc64/rtas.h @@ -188,6 +188,11 @@ extern int rtas_set_power_level(int powerdomain, int level, int *setlevel); extern int rtas_set_indicator(int indicator, int index, int new_value); extern void rtas_initialize(void); +struct rtc_time; +extern void rtas_get_boot_time(struct rtc_time *rtc_time); +extern void rtas_get_rtc_time(struct rtc_time *rtc_time); +extern int rtas_set_rtc_time(struct rtc_time *rtc_time); + /* Given an RTAS status code of 9900..9905 compute the hinted delay */ unsigned int rtas_extended_busy_delay_time(int status); static inline int rtas_is_extended_busy(int status) -- cgit 1.2.3-korg From c5a3c2e52af1bcb118022ffac9a0fd1d42d43bd3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Jun 2005 09:43:23 +1000 Subject: [PATCH] ppc64: Split out generic rtas code from pSeries_pci.c. BPA is using rtas for PCI but should not be confused by pSeries code. This also avoids some #ifdefs. Other platforms that want to use rtas_pci.c could create their own platform_pci.c with platform specific fixups. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/Makefile | 3 +- arch/ppc64/kernel/mpic.h | 3 + arch/ppc64/kernel/pSeries_pci.c | 476 +------------------------------------- arch/ppc64/kernel/rtas_pci.c | 495 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 506 insertions(+), 471 deletions(-) create mode 100644 arch/ppc64/kernel/rtas_pci.c diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index b5e167cf1a05e..f389f2453daa1 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -31,13 +31,14 @@ obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o mpic.o obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \ pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \ - xics.o rtas.o pSeries_setup.o pSeries_iommu.o + xics.o pSeries_setup.o pSeries_iommu.o obj-$(CONFIG_EEH) += eeh.o obj-$(CONFIG_PROC_FS) += proc_ppc64.o obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o +obj-$(CONFIG_PPC_RTAS) += rtas.o rtas_pci.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_VIOPATH) += viopath.o diff --git a/arch/ppc64/kernel/mpic.h b/arch/ppc64/kernel/mpic.h index 571b3c99e0623..63e177143eac2 100644 --- a/arch/ppc64/kernel/mpic.h +++ b/arch/ppc64/kernel/mpic.h @@ -265,3 +265,6 @@ extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs); /* This one gets to the primary mpic */ extern int mpic_get_irq(struct pt_regs *regs); + +/* global mpic for pSeries */ +extern struct mpic *pSeries_mpic; diff --git a/arch/ppc64/kernel/pSeries_pci.c b/arch/ppc64/kernel/pSeries_pci.c index 0b1cca281408b..dfa6d3d3e9f0e 100644 --- a/arch/ppc64/kernel/pSeries_pci.c +++ b/arch/ppc64/kernel/pSeries_pci.c @@ -1,13 +1,11 @@ /* - * pSeries_pci.c + * arch/ppc64/kernel/pSeries_pci.c * * Copyright (C) 2001 Dave Engebretsen, IBM Corporation * Copyright (C) 2003 Anton Blanchard , IBM * * pSeries specific routines for PCI. * - * Based on code from pci.c and chrp_pci.c - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -23,430 +21,18 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include +#include #include -#include #include #include -#include -#include -#include -#include -#include -#include -#include #include -#include -#include +#include -#include "mpic.h" #include "pci.h" -/* RTAS tokens */ -static int read_pci_config; -static int write_pci_config; -static int ibm_read_pci_config; -static int ibm_write_pci_config; - -static int s7a_workaround; - -extern struct mpic *pSeries_mpic; - -static int config_access_valid(struct device_node *dn, int where) -{ - if (where < 256) - return 1; - if (where < 4096 && dn->pci_ext_config_space) - return 1; - - return 0; -} - -static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) -{ - int returnval = -1; - unsigned long buid, addr; - int ret; - - if (!dn) - return PCIBIOS_DEVICE_NOT_FOUND; - if (!config_access_valid(dn, where)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - addr = ((where & 0xf00) << 20) | (dn->busno << 16) | - (dn->devfn << 8) | (where & 0xff); - buid = dn->phb->buid; - if (buid) { - ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, - addr, buid >> 32, buid & 0xffffffff, size); - } else { - ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); - } - *val = returnval; - - if (ret) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (returnval == EEH_IO_ERROR_VALUE(size) - && eeh_dn_check_failure (dn, NULL)) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int rtas_pci_read_config(struct pci_bus *bus, - unsigned int devfn, - int where, int size, u32 *val) -{ - struct device_node *busdn, *dn; - - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ - - /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->devfn == devfn) - return rtas_read_config(dn, where, size, val); - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static int rtas_write_config(struct device_node *dn, int where, int size, u32 val) -{ - unsigned long buid, addr; - int ret; - - if (!dn) - return PCIBIOS_DEVICE_NOT_FOUND; - if (!config_access_valid(dn, where)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - addr = ((where & 0xf00) << 20) | (dn->busno << 16) | - (dn->devfn << 8) | (where & 0xff); - buid = dn->phb->buid; - if (buid) { - ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); - } else { - ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); - } - - if (ret) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int rtas_pci_write_config(struct pci_bus *bus, - unsigned int devfn, - int where, int size, u32 val) -{ - struct device_node *busdn, *dn; - - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ - - /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->devfn == devfn) - return rtas_write_config(dn, where, size, val); - return PCIBIOS_DEVICE_NOT_FOUND; -} - -struct pci_ops rtas_pci_ops = { - rtas_pci_read_config, - rtas_pci_write_config -}; - -int is_python(struct device_node *dev) -{ - char *model = (char *)get_property(dev, "model", NULL); - - if (model && strstr(model, "Python")) - return 1; - - return 0; -} - -static int get_phb_reg_prop(struct device_node *dev, - unsigned int addr_size_words, - struct reg_property64 *reg) -{ - unsigned int *ui_ptr = NULL, len; - - /* Found a PHB, now figure out where his registers are mapped. */ - ui_ptr = (unsigned int *)get_property(dev, "reg", &len); - if (ui_ptr == NULL) - return 1; - - if (addr_size_words == 1) { - reg->address = ((struct reg_property32 *)ui_ptr)->address; - reg->size = ((struct reg_property32 *)ui_ptr)->size; - } else { - *reg = *((struct reg_property64 *)ui_ptr); - } - - return 0; -} - -static void python_countermeasures(struct device_node *dev, - unsigned int addr_size_words) -{ - struct reg_property64 reg_struct; - void __iomem *chip_regs; - volatile u32 val; - - if (get_phb_reg_prop(dev, addr_size_words, ®_struct)) - return; - - /* Python's register file is 1 MB in size. */ - chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); - - /* - * Firmware doesn't always clear this bit which is critical - * for good performance - Anton - */ - -#define PRG_CL_RESET_VALID 0x00010000 - - val = in_be32(chip_regs + 0xf6030); - if (val & PRG_CL_RESET_VALID) { - printk(KERN_INFO "Python workaround: "); - val &= ~PRG_CL_RESET_VALID; - out_be32(chip_regs + 0xf6030, val); - /* - * We must read it back for changes to - * take effect - */ - val = in_be32(chip_regs + 0xf6030); - printk("reg0: %x\n", val); - } - - iounmap(chip_regs); -} - -void __init init_pci_config_tokens (void) -{ - read_pci_config = rtas_token("read-pci-config"); - write_pci_config = rtas_token("write-pci-config"); - ibm_read_pci_config = rtas_token("ibm,read-pci-config"); - ibm_write_pci_config = rtas_token("ibm,write-pci-config"); -} - -unsigned long __devinit get_phb_buid (struct device_node *phb) -{ - int addr_cells; - unsigned int *buid_vals; - unsigned int len; - unsigned long buid; - - if (ibm_read_pci_config == -1) return 0; - - /* PHB's will always be children of the root node, - * or so it is promised by the current firmware. */ - if (phb->parent == NULL) - return 0; - if (phb->parent->parent) - return 0; - - buid_vals = (unsigned int *) get_property(phb, "reg", &len); - if (buid_vals == NULL) - return 0; - - addr_cells = prom_n_addr_cells(phb); - if (addr_cells == 1) { - buid = (unsigned long) buid_vals[0]; - } else { - buid = (((unsigned long)buid_vals[0]) << 32UL) | - (((unsigned long)buid_vals[1]) & 0xffffffff); - } - return buid; -} - -static int phb_set_bus_ranges(struct device_node *dev, - struct pci_controller *phb) -{ - int *bus_range; - unsigned int len; - - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - return 1; - } - - phb->first_busno = bus_range[0]; - phb->last_busno = bus_range[1]; - - return 0; -} - -static int __devinit setup_phb(struct device_node *dev, - struct pci_controller *phb, - unsigned int addr_size_words) -{ - pci_setup_pci_controller(phb); - - if (is_python(dev)) - python_countermeasures(dev, addr_size_words); - - if (phb_set_bus_ranges(dev, phb)) - return 1; - - phb->arch_data = dev; - phb->ops = &rtas_pci_ops; - phb->buid = get_phb_buid(dev); - - return 0; -} - -static void __devinit add_linux_pci_domain(struct device_node *dev, - struct pci_controller *phb, - struct property *of_prop) -{ - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(phb->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); - prom_add_property(dev, of_prop); -} - -static struct pci_controller * __init alloc_phb(struct device_node *dev, - unsigned int addr_size_words) -{ - struct pci_controller *phb; - struct property *of_prop; - - phb = alloc_bootmem(sizeof(struct pci_controller)); - if (phb == NULL) - return NULL; - - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(phb->global_number)); - if (!of_prop) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - add_linux_pci_domain(dev, phb, of_prop); - - return phb; -} - -static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) -{ - struct pci_controller *phb; - - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), - GFP_KERNEL); - if (phb == NULL) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - phb->is_dynamic = 1; - - /* TODO: linux,pci-domain? */ - - return phb; -} - -unsigned long __init find_and_init_phbs(void) -{ - struct device_node *node; - struct pci_controller *phb; - unsigned int root_size_cells = 0; - unsigned int index; - unsigned int *opprop = NULL; - struct device_node *root = of_find_node_by_path("/"); - - if (ppc64_interrupt_controller == IC_OPEN_PIC) { - opprop = (unsigned int *)get_property(root, - "platform-open-pic", NULL); - } - - root_size_cells = prom_n_size_cells(root); - - index = 0; - - for (node = of_get_next_child(root, NULL); - node != NULL; - node = of_get_next_child(root, node)) { - if (node->type == NULL || strcmp(node->type, "pci") != 0) - continue; - - phb = alloc_phb(node, root_size_cells); - if (!phb) - continue; - - pci_process_bridge_OF_ranges(phb, node); - pci_setup_phb_io(phb, index == 0); - - if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) { - int addr = root_size_cells * (index + 2) - 1; - mpic_assign_isu(pSeries_mpic, index, opprop[addr]); - } - - index++; - } - - of_node_put(root); - pci_devs_phb_init(); - - /* - * pci_probe_only and pci_assign_all_buses can be set via properties - * in chosen. - */ - if (of_chosen) { - int *prop; - - prop = (int *)get_property(of_chosen, "linux,pci-probe-only", - NULL); - if (prop) - pci_probe_only = *prop; - - prop = (int *)get_property(of_chosen, - "linux,pci-assign-all-buses", NULL); - if (prop) - pci_assign_all_buses = *prop; - } - - return 0; -} - -struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) -{ - struct device_node *root = of_find_node_by_path("/"); - unsigned int root_size_cells = 0; - struct pci_controller *phb; - struct pci_bus *bus; - int primary; - - root_size_cells = prom_n_size_cells(root); - - primary = list_empty(&hose_list); - phb = alloc_phb_dynamic(dn, root_size_cells); - if (!phb) - return NULL; - - pci_process_bridge_OF_ranges(phb, dn); - - pci_setup_phb_io_dynamic(phb, primary); - of_node_put(root); - - pci_devs_phb_init_dynamic(phb); - phb->last_busno = 0xff; - bus = pci_scan_bus(phb->first_busno, phb->ops, phb->arch_data); - phb->bus = bus; - phb->last_busno = bus->subordinate; - - return phb; -} -EXPORT_SYMBOL(init_phb_dynamic); +static int __initdata s7a_workaround; #if 0 void pcibios_name_device(struct pci_dev *dev) @@ -474,7 +60,7 @@ void pcibios_name_device(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_name_device); #endif -static void check_s7a(void) +static void __init check_s7a(void) { struct device_node *root; char *model; @@ -488,56 +74,6 @@ static void check_s7a(void) } } -/* RPA-specific bits for removing PHBs */ -int pcibios_remove_root_bus(struct pci_controller *phb) -{ - struct pci_bus *b = phb->bus; - struct resource *res; - int rc, i; - - res = b->resource[0]; - if (!res->flags) { - printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__, - b->name); - return 1; - } - - rc = unmap_bus_range(b); - if (rc) { - printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", - __FUNCTION__, b->name); - return 1; - } - - if (release_resource(res)) { - printk(KERN_ERR "%s: failed to release IO on bus %s\n", - __FUNCTION__, b->name); - return 1; - } - - for (i = 1; i < 3; ++i) { - res = b->resource[i]; - if (!res->flags && i == 0) { - printk(KERN_ERR "%s: no MEM resource for PHB %s\n", - __FUNCTION__, b->name); - return 1; - } - if (res->flags && release_resource(res)) { - printk(KERN_ERR - "%s: failed to release IO %d on bus %s\n", - __FUNCTION__, i, b->name); - return 1; - } - } - - list_del(&phb->list_node); - if (phb->is_dynamic) - kfree(phb); - - return 0; -} -EXPORT_SYMBOL(pcibios_remove_root_bus); - static void __init pSeries_request_regions(void) { if (!isa_io_base) diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c new file mode 100644 index 0000000000000..1048817befb84 --- /dev/null +++ b/arch/ppc64/kernel/rtas_pci.c @@ -0,0 +1,495 @@ +/* + * arch/ppc64/kernel/rtas_pci.c + * + * Copyright (C) 2001 Dave Engebretsen, IBM Corporation + * Copyright (C) 2003 Anton Blanchard , IBM + * + * RTAS specific routines for PCI. + * + * Based on code from pci.c, chrp_pci.c and pSeries_pci.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpic.h" +#include "pci.h" + +/* RTAS tokens */ +static int read_pci_config; +static int write_pci_config; +static int ibm_read_pci_config; +static int ibm_write_pci_config; + +static int config_access_valid(struct device_node *dn, int where) +{ + if (where < 256) + return 1; + if (where < 4096 && dn->pci_ext_config_space) + return 1; + + return 0; +} + +static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) +{ + int returnval = -1; + unsigned long buid, addr; + int ret; + + if (!dn) + return PCIBIOS_DEVICE_NOT_FOUND; + if (!config_access_valid(dn, where)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = ((where & 0xf00) << 20) | (dn->busno << 16) | + (dn->devfn << 8) | (where & 0xff); + buid = dn->phb->buid; + if (buid) { + ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, + addr, buid >> 32, buid & 0xffffffff, size); + } else { + ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); + } + *val = returnval; + + if (ret) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (returnval == EEH_IO_ERROR_VALUE(size) + && eeh_dn_check_failure (dn, NULL)) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static int rtas_pci_read_config(struct pci_bus *bus, + unsigned int devfn, + int where, int size, u32 *val) +{ + struct device_node *busdn, *dn; + + if (bus->self) + busdn = pci_device_to_OF_node(bus->self); + else + busdn = bus->sysdata; /* must be a phb */ + + /* Search only direct children of the bus */ + for (dn = busdn->child; dn; dn = dn->sibling) + if (dn->devfn == devfn) + return rtas_read_config(dn, where, size, val); + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int rtas_write_config(struct device_node *dn, int where, int size, u32 val) +{ + unsigned long buid, addr; + int ret; + + if (!dn) + return PCIBIOS_DEVICE_NOT_FOUND; + if (!config_access_valid(dn, where)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = ((where & 0xf00) << 20) | (dn->busno << 16) | + (dn->devfn << 8) | (where & 0xff); + buid = dn->phb->buid; + if (buid) { + ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); + } else { + ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); + } + + if (ret) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static int rtas_pci_write_config(struct pci_bus *bus, + unsigned int devfn, + int where, int size, u32 val) +{ + struct device_node *busdn, *dn; + + if (bus->self) + busdn = pci_device_to_OF_node(bus->self); + else + busdn = bus->sysdata; /* must be a phb */ + + /* Search only direct children of the bus */ + for (dn = busdn->child; dn; dn = dn->sibling) + if (dn->devfn == devfn) + return rtas_write_config(dn, where, size, val); + return PCIBIOS_DEVICE_NOT_FOUND; +} + +struct pci_ops rtas_pci_ops = { + rtas_pci_read_config, + rtas_pci_write_config +}; + +int is_python(struct device_node *dev) +{ + char *model = (char *)get_property(dev, "model", NULL); + + if (model && strstr(model, "Python")) + return 1; + + return 0; +} + +static int get_phb_reg_prop(struct device_node *dev, + unsigned int addr_size_words, + struct reg_property64 *reg) +{ + unsigned int *ui_ptr = NULL, len; + + /* Found a PHB, now figure out where his registers are mapped. */ + ui_ptr = (unsigned int *)get_property(dev, "reg", &len); + if (ui_ptr == NULL) + return 1; + + if (addr_size_words == 1) { + reg->address = ((struct reg_property32 *)ui_ptr)->address; + reg->size = ((struct reg_property32 *)ui_ptr)->size; + } else { + *reg = *((struct reg_property64 *)ui_ptr); + } + + return 0; +} + +static void python_countermeasures(struct device_node *dev, + unsigned int addr_size_words) +{ + struct reg_property64 reg_struct; + void __iomem *chip_regs; + volatile u32 val; + + if (get_phb_reg_prop(dev, addr_size_words, ®_struct)) + return; + + /* Python's register file is 1 MB in size. */ + chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); + + /* + * Firmware doesn't always clear this bit which is critical + * for good performance - Anton + */ + +#define PRG_CL_RESET_VALID 0x00010000 + + val = in_be32(chip_regs + 0xf6030); + if (val & PRG_CL_RESET_VALID) { + printk(KERN_INFO "Python workaround: "); + val &= ~PRG_CL_RESET_VALID; + out_be32(chip_regs + 0xf6030, val); + /* + * We must read it back for changes to + * take effect + */ + val = in_be32(chip_regs + 0xf6030); + printk("reg0: %x\n", val); + } + + iounmap(chip_regs); +} + +void __init init_pci_config_tokens (void) +{ + read_pci_config = rtas_token("read-pci-config"); + write_pci_config = rtas_token("write-pci-config"); + ibm_read_pci_config = rtas_token("ibm,read-pci-config"); + ibm_write_pci_config = rtas_token("ibm,write-pci-config"); +} + +unsigned long __devinit get_phb_buid (struct device_node *phb) +{ + int addr_cells; + unsigned int *buid_vals; + unsigned int len; + unsigned long buid; + + if (ibm_read_pci_config == -1) return 0; + + /* PHB's will always be children of the root node, + * or so it is promised by the current firmware. */ + if (phb->parent == NULL) + return 0; + if (phb->parent->parent) + return 0; + + buid_vals = (unsigned int *) get_property(phb, "reg", &len); + if (buid_vals == NULL) + return 0; + + addr_cells = prom_n_addr_cells(phb); + if (addr_cells == 1) { + buid = (unsigned long) buid_vals[0]; + } else { + buid = (((unsigned long)buid_vals[0]) << 32UL) | + (((unsigned long)buid_vals[1]) & 0xffffffff); + } + return buid; +} + +static int phb_set_bus_ranges(struct device_node *dev, + struct pci_controller *phb) +{ + int *bus_range; + unsigned int len; + + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + return 1; + } + + phb->first_busno = bus_range[0]; + phb->last_busno = bus_range[1]; + + return 0; +} + +static int __devinit setup_phb(struct device_node *dev, + struct pci_controller *phb, + unsigned int addr_size_words) +{ + pci_setup_pci_controller(phb); + + if (is_python(dev)) + python_countermeasures(dev, addr_size_words); + + if (phb_set_bus_ranges(dev, phb)) + return 1; + + phb->arch_data = dev; + phb->ops = &rtas_pci_ops; + phb->buid = get_phb_buid(dev); + + return 0; +} + +static void __devinit add_linux_pci_domain(struct device_node *dev, + struct pci_controller *phb, + struct property *of_prop) +{ + memset(of_prop, 0, sizeof(struct property)); + of_prop->name = "linux,pci-domain"; + of_prop->length = sizeof(phb->global_number); + of_prop->value = (unsigned char *)&of_prop[1]; + memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); + prom_add_property(dev, of_prop); +} + +static struct pci_controller * __init alloc_phb(struct device_node *dev, + unsigned int addr_size_words) +{ + struct pci_controller *phb; + struct property *of_prop; + + phb = alloc_bootmem(sizeof(struct pci_controller)); + if (phb == NULL) + return NULL; + + of_prop = alloc_bootmem(sizeof(struct property) + + sizeof(phb->global_number)); + if (!of_prop) + return NULL; + + if (setup_phb(dev, phb, addr_size_words)) + return NULL; + + add_linux_pci_domain(dev, phb, of_prop); + + return phb; +} + +static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) +{ + struct pci_controller *phb; + + phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), + GFP_KERNEL); + if (phb == NULL) + return NULL; + + if (setup_phb(dev, phb, addr_size_words)) + return NULL; + + phb->is_dynamic = 1; + + /* TODO: linux,pci-domain? */ + + return phb; +} + +unsigned long __init find_and_init_phbs(void) +{ + struct device_node *node; + struct pci_controller *phb; + unsigned int root_size_cells = 0; + unsigned int index; + unsigned int *opprop = NULL; + struct device_node *root = of_find_node_by_path("/"); + + if (ppc64_interrupt_controller == IC_OPEN_PIC) { + opprop = (unsigned int *)get_property(root, + "platform-open-pic", NULL); + } + + root_size_cells = prom_n_size_cells(root); + + index = 0; + + for (node = of_get_next_child(root, NULL); + node != NULL; + node = of_get_next_child(root, node)) { + if (node->type == NULL || strcmp(node->type, "pci") != 0) + continue; + + phb = alloc_phb(node, root_size_cells); + if (!phb) + continue; + + pci_process_bridge_OF_ranges(phb, node); + pci_setup_phb_io(phb, index == 0); +#ifdef CONFIG_PPC_PSERIES + if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) { + int addr = root_size_cells * (index + 2) - 1; + mpic_assign_isu(pSeries_mpic, index, opprop[addr]); + } +#endif + index++; + } + + of_node_put(root); + pci_devs_phb_init(); + + /* + * pci_probe_only and pci_assign_all_buses can be set via properties + * in chosen. + */ + if (of_chosen) { + int *prop; + + prop = (int *)get_property(of_chosen, "linux,pci-probe-only", + NULL); + if (prop) + pci_probe_only = *prop; + + prop = (int *)get_property(of_chosen, + "linux,pci-assign-all-buses", NULL); + if (prop) + pci_assign_all_buses = *prop; + } + + return 0; +} + +struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) +{ + struct device_node *root = of_find_node_by_path("/"); + unsigned int root_size_cells = 0; + struct pci_controller *phb; + struct pci_bus *bus; + int primary; + + root_size_cells = prom_n_size_cells(root); + + primary = list_empty(&hose_list); + phb = alloc_phb_dynamic(dn, root_size_cells); + if (!phb) + return NULL; + + pci_process_bridge_OF_ranges(phb, dn); + + pci_setup_phb_io_dynamic(phb, primary); + of_node_put(root); + + pci_devs_phb_init_dynamic(phb); + phb->last_busno = 0xff; + bus = pci_scan_bus(phb->first_busno, phb->ops, phb->arch_data); + phb->bus = bus; + phb->last_busno = bus->subordinate; + + return phb; +} +EXPORT_SYMBOL(init_phb_dynamic); + +/* RPA-specific bits for removing PHBs */ +int pcibios_remove_root_bus(struct pci_controller *phb) +{ + struct pci_bus *b = phb->bus; + struct resource *res; + int rc, i; + + res = b->resource[0]; + if (!res->flags) { + printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__, + b->name); + return 1; + } + + rc = unmap_bus_range(b); + if (rc) { + printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", + __FUNCTION__, b->name); + return 1; + } + + if (release_resource(res)) { + printk(KERN_ERR "%s: failed to release IO on bus %s\n", + __FUNCTION__, b->name); + return 1; + } + + for (i = 1; i < 3; ++i) { + res = b->resource[i]; + if (!res->flags && i == 0) { + printk(KERN_ERR "%s: no MEM resource for PHB %s\n", + __FUNCTION__, b->name); + return 1; + } + if (res->flags && release_resource(res)) { + printk(KERN_ERR + "%s: failed to release IO %d on bus %s\n", + __FUNCTION__, i, b->name); + return 1; + } + } + + list_del(&phb->list_node); + if (phb->is_dynamic) + kfree(phb); + + return 0; +} +EXPORT_SYMBOL(pcibios_remove_root_bus); -- cgit 1.2.3-korg From 6566c6f1f18d42affe73ccdd403e290b64d10473 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Jun 2005 09:43:28 +1000 Subject: [PATCH] ppc64: pSeries_progress -> rtas_progress The pSeries_progress function is called from some places in the rtas code, which may also be used by non-pSeries platforms. Though pSeries is currently the only platform type that implements display-character, the code is actually generic enough to be part of the rtas subsystem. I hit a bug here because the generic rtas code tried calling ppc_md.progress, which points to an __init function on most platforms. We could also clear the ppc_md.progress pointer when freeing the init memory to make it more explicit that ppc_md.progress must not be called after bootup. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/pSeries_setup.c | 103 +----------------------------------- arch/ppc64/kernel/rtas-proc.c | 4 +- arch/ppc64/kernel/rtas.c | 106 +++++++++++++++++++++++++++++++++++++- include/asm-ppc64/rtas.h | 1 + 4 files changed, 108 insertions(+), 106 deletions(-) diff --git a/arch/ppc64/kernel/pSeries_setup.c b/arch/ppc64/kernel/pSeries_setup.c index c5f3ccac7cd16..41e6de2c91587 100644 --- a/arch/ppc64/kernel/pSeries_setup.c +++ b/arch/ppc64/kernel/pSeries_setup.c @@ -375,107 +375,6 @@ static void __init pSeries_init_early(void) } -static void pSeries_progress(char *s, unsigned short hex) -{ - struct device_node *root; - int width, *p; - char *os; - static int display_character, set_indicator; - static int max_width; - static DEFINE_SPINLOCK(progress_lock); - static int pending_newline = 0; /* did last write end with unprinted newline? */ - - if (!rtas.base) - return; - - if (max_width == 0) { - if ((root = find_path_device("/rtas")) && - (p = (unsigned int *)get_property(root, - "ibm,display-line-length", - NULL))) - max_width = *p; - else - max_width = 0x10; - display_character = rtas_token("display-character"); - set_indicator = rtas_token("set-indicator"); - } - - if (display_character == RTAS_UNKNOWN_SERVICE) { - /* use hex display if available */ - if (set_indicator != RTAS_UNKNOWN_SERVICE) - rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex); - return; - } - - spin_lock(&progress_lock); - - /* - * Last write ended with newline, but we didn't print it since - * it would just clear the bottom line of output. Print it now - * instead. - * - * If no newline is pending, print a CR to start output at the - * beginning of the line. - */ - if (pending_newline) { - rtas_call(display_character, 1, 1, NULL, '\r'); - rtas_call(display_character, 1, 1, NULL, '\n'); - pending_newline = 0; - } else { - rtas_call(display_character, 1, 1, NULL, '\r'); - } - - width = max_width; - os = s; - while (*os) { - if (*os == '\n' || *os == '\r') { - /* Blank to end of line. */ - while (width-- > 0) - rtas_call(display_character, 1, 1, NULL, ' '); - - /* If newline is the last character, save it - * until next call to avoid bumping up the - * display output. - */ - if (*os == '\n' && !os[1]) { - pending_newline = 1; - spin_unlock(&progress_lock); - return; - } - - /* RTAS wants CR-LF, not just LF */ - - if (*os == '\n') { - rtas_call(display_character, 1, 1, NULL, '\r'); - rtas_call(display_character, 1, 1, NULL, '\n'); - } else { - /* CR might be used to re-draw a line, so we'll - * leave it alone and not add LF. - */ - rtas_call(display_character, 1, 1, NULL, *os); - } - - width = max_width; - } else { - width--; - rtas_call(display_character, 1, 1, NULL, *os); - } - - os++; - - /* if we overwrite the screen length */ - if (width <= 0) - while ((*os != 0) && (*os != '\n') && (*os != '\r')) - os++; - } - - /* Blank to end of line. */ - while (width-- > 0) - rtas_call(display_character, 1, 1, NULL, ' '); - - spin_unlock(&progress_lock); -} - static int pSeries_check_legacy_ioport(unsigned int baseport) { struct device_node *np; @@ -535,7 +434,7 @@ struct machdep_calls __initdata pSeries_md = { .get_rtc_time = rtas_get_rtc_time, .set_rtc_time = rtas_set_rtc_time, .calibrate_decr = generic_calibrate_decr, - .progress = pSeries_progress, + .progress = rtas_progress, .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, diff --git a/arch/ppc64/kernel/rtas-proc.c b/arch/ppc64/kernel/rtas-proc.c index 28b1f1521f216..1f3ff860fdf03 100644 --- a/arch/ppc64/kernel/rtas-proc.c +++ b/arch/ppc64/kernel/rtas-proc.c @@ -371,11 +371,11 @@ static ssize_t ppc_rtas_progress_write(struct file *file, /* Lets see if the user passed hexdigits */ hex = simple_strtoul(progress_led, NULL, 10); - ppc_md.progress ((char *)progress_led, hex); + rtas_progress ((char *)progress_led, hex); return count; /* clear the line */ - /* ppc_md.progress(" ", 0xffff);*/ + /* rtas_progress(" ", 0xffff);*/ } /* ****************************************************************** */ static int ppc_rtas_progress_show(struct seq_file *m, void *v) diff --git a/arch/ppc64/kernel/rtas.c b/arch/ppc64/kernel/rtas.c index 5575603def277..43e1518653d55 100644 --- a/arch/ppc64/kernel/rtas.c +++ b/arch/ppc64/kernel/rtas.c @@ -91,6 +91,108 @@ call_rtas_display_status_delay(unsigned char c) } } +void +rtas_progress(char *s, unsigned short hex) +{ + struct device_node *root; + int width, *p; + char *os; + static int display_character, set_indicator; + static int max_width; + static DEFINE_SPINLOCK(progress_lock); + static int pending_newline = 0; /* did last write end with unprinted newline? */ + + if (!rtas.base) + return; + + if (max_width == 0) { + if ((root = find_path_device("/rtas")) && + (p = (unsigned int *)get_property(root, + "ibm,display-line-length", + NULL))) + max_width = *p; + else + max_width = 0x10; + display_character = rtas_token("display-character"); + set_indicator = rtas_token("set-indicator"); + } + + if (display_character == RTAS_UNKNOWN_SERVICE) { + /* use hex display if available */ + if (set_indicator != RTAS_UNKNOWN_SERVICE) + rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex); + return; + } + + spin_lock(&progress_lock); + + /* + * Last write ended with newline, but we didn't print it since + * it would just clear the bottom line of output. Print it now + * instead. + * + * If no newline is pending, print a CR to start output at the + * beginning of the line. + */ + if (pending_newline) { + rtas_call(display_character, 1, 1, NULL, '\r'); + rtas_call(display_character, 1, 1, NULL, '\n'); + pending_newline = 0; + } else { + rtas_call(display_character, 1, 1, NULL, '\r'); + } + + width = max_width; + os = s; + while (*os) { + if (*os == '\n' || *os == '\r') { + /* Blank to end of line. */ + while (width-- > 0) + rtas_call(display_character, 1, 1, NULL, ' '); + + /* If newline is the last character, save it + * until next call to avoid bumping up the + * display output. + */ + if (*os == '\n' && !os[1]) { + pending_newline = 1; + spin_unlock(&progress_lock); + return; + } + + /* RTAS wants CR-LF, not just LF */ + + if (*os == '\n') { + rtas_call(display_character, 1, 1, NULL, '\r'); + rtas_call(display_character, 1, 1, NULL, '\n'); + } else { + /* CR might be used to re-draw a line, so we'll + * leave it alone and not add LF. + */ + rtas_call(display_character, 1, 1, NULL, *os); + } + + width = max_width; + } else { + width--; + rtas_call(display_character, 1, 1, NULL, *os); + } + + os++; + + /* if we overwrite the screen length */ + if (width <= 0) + while ((*os != 0) && (*os != '\n') && (*os != '\r')) + os++; + } + + /* Blank to end of line. */ + while (width-- > 0) + rtas_call(display_character, 1, 1, NULL, ' '); + + spin_unlock(&progress_lock); +} + int rtas_token(const char *service) { @@ -425,8 +527,8 @@ rtas_flash_firmware(void) printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); printk(KERN_ALERT "FLASH: performing flash and reboot\n"); - ppc_md.progress("Flashing \n", 0x0); - ppc_md.progress("Please Wait... ", 0x0); + rtas_progress("Flashing \n", 0x0); + rtas_progress("Please Wait... ", 0x0); printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); switch (status) { /* should only get "bad" status */ diff --git a/include/asm-ppc64/rtas.h b/include/asm-ppc64/rtas.h index c46ceb2ffc124..e7d1b5222802b 100644 --- a/include/asm-ppc64/rtas.h +++ b/include/asm-ppc64/rtas.h @@ -186,6 +186,7 @@ extern int rtas_get_sensor(int sensor, int index, int *state); extern int rtas_get_power_level(int powerdomain, int *level); extern int rtas_set_power_level(int powerdomain, int level, int *setlevel); extern int rtas_set_indicator(int indicator, int index, int new_value); +extern void rtas_progress(char *s, unsigned short hex); extern void rtas_initialize(void); struct rtc_time; -- cgit 1.2.3-korg From 5f5b4e669a59be1cf8fc9d6d04ff1ccad8ab6de0 Mon Sep 17 00:00:00 2001 From: Utz Bacher Date: Thu, 23 Jun 2005 09:43:31 +1000 Subject: [PATCH] ppc64: add a minimal nvram driver The firmware provides the location and size of the nvram in the device tree, so it does not really contain any hardware specific bits and could be used on other machines as well. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/bpa_nvram.c | 118 ++++++++++++++++++++++++++++++++++++++++++ include/asm-ppc64/nvram.h | 1 + 2 files changed, 119 insertions(+) create mode 100644 arch/ppc64/kernel/bpa_nvram.c diff --git a/arch/ppc64/kernel/bpa_nvram.c b/arch/ppc64/kernel/bpa_nvram.c new file mode 100644 index 0000000000000..06a119cfceb5e --- /dev/null +++ b/arch/ppc64/kernel/bpa_nvram.c @@ -0,0 +1,118 @@ +/* + * NVRAM for CPBW + * + * (C) Copyright IBM Corp. 2005 + * + * Authors : Utz Bacher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +static void __iomem *bpa_nvram_start; +static long bpa_nvram_len; +static spinlock_t bpa_nvram_lock = SPIN_LOCK_UNLOCKED; + +static ssize_t bpa_nvram_read(char *buf, size_t count, loff_t *index) +{ + unsigned long flags; + + if (*index >= bpa_nvram_len) + return 0; + if (*index + count > bpa_nvram_len) + count = bpa_nvram_len - *index; + + spin_lock_irqsave(&bpa_nvram_lock, flags); + + memcpy_fromio(buf, bpa_nvram_start + *index, count); + + spin_unlock_irqrestore(&bpa_nvram_lock, flags); + + *index += count; + return count; +} + +static ssize_t bpa_nvram_write(char *buf, size_t count, loff_t *index) +{ + unsigned long flags; + + if (*index >= bpa_nvram_len) + return 0; + if (*index + count > bpa_nvram_len) + count = bpa_nvram_len - *index; + + spin_lock_irqsave(&bpa_nvram_lock, flags); + + memcpy_toio(bpa_nvram_start + *index, buf, count); + + spin_unlock_irqrestore(&bpa_nvram_lock, flags); + + *index += count; + return count; +} + +static ssize_t bpa_nvram_get_size(void) +{ + return bpa_nvram_len; +} + +int __init bpa_nvram_init(void) +{ + struct device_node *nvram_node; + unsigned long *buffer; + int proplen; + unsigned long nvram_addr; + int ret; + + ret = -ENODEV; + nvram_node = of_find_node_by_type(NULL, "nvram"); + if (!nvram_node) + goto out; + + ret = -EIO; + buffer = (unsigned long *)get_property(nvram_node, "reg", &proplen); + if (proplen != 2*sizeof(unsigned long)) + goto out; + + ret = -ENODEV; + nvram_addr = buffer[0]; + bpa_nvram_len = buffer[1]; + if ( (!bpa_nvram_len) || (!nvram_addr) ) + goto out; + + bpa_nvram_start = ioremap(nvram_addr, bpa_nvram_len); + if (!bpa_nvram_start) + goto out; + + printk(KERN_INFO "BPA NVRAM, %luk mapped to %p\n", + bpa_nvram_len >> 10, bpa_nvram_start); + + ppc_md.nvram_read = bpa_nvram_read; + ppc_md.nvram_write = bpa_nvram_write; + ppc_md.nvram_size = bpa_nvram_get_size; + +out: + of_node_put(nvram_node); + return ret; +} diff --git a/include/asm-ppc64/nvram.h b/include/asm-ppc64/nvram.h index 4e6dd370d936d..dfaa21566c9aa 100644 --- a/include/asm-ppc64/nvram.h +++ b/include/asm-ppc64/nvram.h @@ -70,6 +70,7 @@ extern struct nvram_partition *nvram_find_partition(int sig, const char *name); extern int pSeries_nvram_init(void); extern int pmac_nvram_init(void); +extern int bpa_nvram_init(void); /* PowerMac specific nvram stuffs */ -- cgit 1.2.3-korg From 031f7edecf46d731673a5dd19ecb0de38f1a2219 Mon Sep 17 00:00:00 2001 From: Utz Bacher Date: Thu, 23 Jun 2005 09:43:34 +1000 Subject: [PATCH] ppc64: add a watchdog driver for rtas Add a watchdog using the RTAS OS surveillance service. This is provided as a simpler alternative to rtasd. The added value is that it works with standard watchdog client programs and can therefore also do user space monitoring. On BPA, rtasd is not really useful because the hardware does not have much to report with event-scan. The driver should also work on other platforms that support the OS surveillance rtas calls. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- drivers/char/watchdog/Kconfig | 10 + drivers/char/watchdog/Makefile | 1 + drivers/char/watchdog/wdrtas.c | 696 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 707 insertions(+) create mode 100644 drivers/char/watchdog/wdrtas.c diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 06a31da2381c4..b53e2e2b5aee9 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -414,6 +414,16 @@ config WATCHDOG_RIO machines. The watchdog timeout period is normally one minute but can be changed with a boot-time parameter. +# ppc64 RTAS watchdog +config WATCHDOG_RTAS + tristate "RTAS watchdog" + depends on WATCHDOG && PPC_RTAS + help + This driver adds watchdog support for the RTAS watchdog. + + To compile this driver as a module, choose M here. The module + will be called wdrtas. + # # ISA-based Watchdog Cards # diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile index 1cd27efa35c17..c1838834ea7f0 100644 --- a/drivers/char/watchdog/Makefile +++ b/drivers/char/watchdog/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o obj-$(CONFIG_IXP2000_WATCHDOG) += ixp2000_wdt.o obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o +obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o # Only one watchdog can succeed. We probe the hardware watchdog # drivers first, then the softdog driver. This means if your hardware diff --git a/drivers/char/watchdog/wdrtas.c b/drivers/char/watchdog/wdrtas.c new file mode 100644 index 0000000000000..619e2ffca33ff --- /dev/null +++ b/drivers/char/watchdog/wdrtas.c @@ -0,0 +1,696 @@ +/* + * FIXME: add wdrtas_get_status and wdrtas_get_boot_status as soon as + * RTAS calls are available + */ + +/* + * RTAS watchdog driver + * + * (C) Copyright IBM Corp. 2005 + * device driver to exploit watchdog RTAS functions + * + * Authors : Utz Bacher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define WDRTAS_MAGIC_CHAR 42 +#define WDRTAS_SUPPORTED_MASK (WDIOF_SETTIMEOUT | \ + WDIOF_MAGICCLOSE) + +MODULE_AUTHOR("Utz Bacher "); +MODULE_DESCRIPTION("RTAS watchdog driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS_MISCDEV(TEMP_MINOR); + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int wdrtas_nowayout = 1; +#else +static int wdrtas_nowayout = 0; +#endif + +static atomic_t wdrtas_miscdev_open = ATOMIC_INIT(0); +static char wdrtas_expect_close = 0; + +static int wdrtas_interval; + +#define WDRTAS_THERMAL_SENSOR 3 +static int wdrtas_token_get_sensor_state; +#define WDRTAS_SURVEILLANCE_IND 9000 +static int wdrtas_token_set_indicator; +#define WDRTAS_SP_SPI 28 +static int wdrtas_token_get_sp; +static int wdrtas_token_event_scan; + +#define WDRTAS_DEFAULT_INTERVAL 300 + +#define WDRTAS_LOGBUFFER_LEN 128 +static char wdrtas_logbuffer[WDRTAS_LOGBUFFER_LEN]; + + +/*** watchdog access functions */ + +/** + * wdrtas_set_interval - sets the watchdog interval + * @interval: new interval + * + * returns 0 on success, <0 on failures + * + * wdrtas_set_interval sets the watchdog keepalive interval by calling the + * RTAS function set-indicator (surveillance). The unit of interval is + * seconds. + */ +static int +wdrtas_set_interval(int interval) +{ + long result; + static int print_msg = 10; + + /* rtas uses minutes */ + interval = (interval + 59) / 60; + + result = rtas_call(wdrtas_token_set_indicator, 3, 1, NULL, + WDRTAS_SURVEILLANCE_IND, 0, interval); + if ( (result < 0) && (print_msg) ) { + printk(KERN_ERR "wdrtas: setting the watchdog to %i " + "timeout failed: %li\n", interval, result); + print_msg--; + } + + return result; +} + +/** + * wdrtas_get_interval - returns the current watchdog interval + * @fallback_value: value (in seconds) to use, if the RTAS call fails + * + * returns the interval + * + * wdrtas_get_interval returns the current watchdog keepalive interval + * as reported by the RTAS function ibm,get-system-parameter. The unit + * of the return value is seconds. + */ +static int +wdrtas_get_interval(int fallback_value) +{ + long result; + char value[4]; + + result = rtas_call(wdrtas_token_get_sp, 3, 1, NULL, + WDRTAS_SP_SPI, (void *)__pa(&value), 4); + if ( (value[0] != 0) || (value[1] != 2) || (value[3] != 0) || + (result < 0) ) { + printk(KERN_WARNING "wdrtas: could not get sp_spi watchdog " + "timeout (%li). Continuing\n", result); + return fallback_value; + } + + /* rtas uses minutes */ + return ((int)value[2]) * 60; +} + +/** + * wdrtas_timer_start - starts watchdog + * + * wdrtas_timer_start starts the watchdog by calling the RTAS function + * set-interval (surveillance) + */ +static void +wdrtas_timer_start(void) +{ + wdrtas_set_interval(wdrtas_interval); +} + +/** + * wdrtas_timer_stop - stops watchdog + * + * wdrtas_timer_stop stops the watchdog timer by calling the RTAS function + * set-interval (surveillance) + */ +static void +wdrtas_timer_stop(void) +{ + wdrtas_set_interval(0); +} + +/** + * wdrtas_log_scanned_event - logs an event we received during keepalive + * + * wdrtas_log_scanned_event prints a message to the log buffer dumping + * the results of the last event-scan call + */ +static void +wdrtas_log_scanned_event(void) +{ + int i; + + for (i = 0; i < WDRTAS_LOGBUFFER_LEN; i += 16) + printk(KERN_INFO "wdrtas: dumping event (line %i/%i), data = " + "%02x %02x %02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + (i / 16) + 1, (WDRTAS_LOGBUFFER_LEN / 16), + wdrtas_logbuffer[i + 0], wdrtas_logbuffer[i + 1], + wdrtas_logbuffer[i + 2], wdrtas_logbuffer[i + 3], + wdrtas_logbuffer[i + 4], wdrtas_logbuffer[i + 5], + wdrtas_logbuffer[i + 6], wdrtas_logbuffer[i + 7], + wdrtas_logbuffer[i + 8], wdrtas_logbuffer[i + 9], + wdrtas_logbuffer[i + 10], wdrtas_logbuffer[i + 11], + wdrtas_logbuffer[i + 12], wdrtas_logbuffer[i + 13], + wdrtas_logbuffer[i + 14], wdrtas_logbuffer[i + 15]); +} + +/** + * wdrtas_timer_keepalive - resets watchdog timer to keep system alive + * + * wdrtas_timer_keepalive restarts the watchdog timer by calling the + * RTAS function event-scan and repeats these calls as long as there are + * events available. All events will be dumped. + */ +static void +wdrtas_timer_keepalive(void) +{ + long result; + + do { + result = rtas_call(wdrtas_token_event_scan, 4, 1, NULL, + RTAS_EVENT_SCAN_ALL_EVENTS, 0, + (void *)__pa(wdrtas_logbuffer), + WDRTAS_LOGBUFFER_LEN); + if (result < 0) + printk(KERN_ERR "wdrtas: event-scan failed: %li\n", + result); + if (result == 0) + wdrtas_log_scanned_event(); + } while (result == 0); +} + +/** + * wdrtas_get_temperature - returns current temperature + * + * returns temperature or <0 on failures + * + * wdrtas_get_temperature returns the current temperature in Fahrenheit. It + * uses the RTAS call get-sensor-state, token 3 to do so + */ +static int +wdrtas_get_temperature(void) +{ + long result; + int temperature = 0; + + result = rtas_call(wdrtas_token_get_sensor_state, 2, 2, + (void *)__pa(&temperature), + WDRTAS_THERMAL_SENSOR, 0); + + if (result < 0) + printk(KERN_WARNING "wdrtas: reading the thermal sensor " + "faild: %li\n", result); + else + temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */ + + return temperature; +} + +/** + * wdrtas_get_status - returns the status of the watchdog + * + * returns a bitmask of defines WDIOF_... as defined in + * include/linux/watchdog.h + */ +static int +wdrtas_get_status(void) +{ + return 0; /* TODO */ +} + +/** + * wdrtas_get_boot_status - returns the reason for the last boot + * + * returns a bitmask of defines WDIOF_... as defined in + * include/linux/watchdog.h, indicating why the watchdog rebooted the system + */ +static int +wdrtas_get_boot_status(void) +{ + return 0; /* TODO */ +} + +/*** watchdog API and operations stuff */ + +/* wdrtas_write - called when watchdog device is written to + * @file: file structure + * @buf: user buffer with data + * @len: amount to data written + * @ppos: position in file + * + * returns the number of successfully processed characters, which is always + * the number of bytes passed to this function + * + * wdrtas_write processes all the data given to it and looks for the magic + * character 'V'. This character allows the watchdog device to be closed + * properly. + */ +static ssize_t +wdrtas_write(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + int i; + char c; + + if (!len) + goto out; + + if (!wdrtas_nowayout) { + wdrtas_expect_close = 0; + /* look for 'V' */ + for (i = 0; i < len; i++) { + if (get_user(c, buf + i)) + return -EFAULT; + /* allow to close device */ + if (c == 'V') + wdrtas_expect_close = WDRTAS_MAGIC_CHAR; + } + } + + wdrtas_timer_keepalive(); + +out: + return len; +} + +/** + * wdrtas_ioctl - ioctl function for the watchdog device + * @inode: inode structure + * @file: file structure + * @cmd: command for ioctl + * @arg: argument pointer + * + * returns 0 on success, <0 on failure + * + * wdrtas_ioctl implements the watchdog API ioctls + */ +static int +wdrtas_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int __user *argp = (void *)arg; + int i; + static struct watchdog_info wdinfo = { + .options = WDRTAS_SUPPORTED_MASK, + .firmware_version = 0, + .identity = "wdrtas" + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &wdinfo, sizeof(wdinfo))) + return -EFAULT; + return 0; + + case WDIOC_GETSTATUS: + i = wdrtas_get_status(); + return put_user(i, argp); + + case WDIOC_GETBOOTSTATUS: + i = wdrtas_get_boot_status(); + return put_user(i, argp); + + case WDIOC_GETTEMP: + if (wdrtas_token_get_sensor_state == RTAS_UNKNOWN_SERVICE) + return -EOPNOTSUPP; + + i = wdrtas_get_temperature(); + return put_user(i, argp); + + case WDIOC_SETOPTIONS: + if (get_user(i, argp)) + return -EFAULT; + if (i & WDIOS_DISABLECARD) + wdrtas_timer_stop(); + if (i & WDIOS_ENABLECARD) { + wdrtas_timer_keepalive(); + wdrtas_timer_start(); + } + if (i & WDIOS_TEMPPANIC) { + /* not implemented. Done by H8 */ + } + return 0; + + case WDIOC_KEEPALIVE: + wdrtas_timer_keepalive(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(i, argp)) + return -EFAULT; + + if (wdrtas_set_interval(i)) + return -EINVAL; + + wdrtas_timer_keepalive(); + + if (wdrtas_token_get_sp == RTAS_UNKNOWN_SERVICE) + wdrtas_interval = i; + else + wdrtas_interval = wdrtas_get_interval(i); + /* fallthrough */ + + case WDIOC_GETTIMEOUT: + return put_user(wdrtas_interval, argp); + + default: + return -ENOIOCTLCMD; + } +} + +/** + * wdrtas_open - open function of watchdog device + * @inode: inode structure + * @file: file structure + * + * returns 0 on success, -EBUSY if the file has been opened already, <0 on + * other failures + * + * function called when watchdog device is opened + */ +static int +wdrtas_open(struct inode *inode, struct file *file) +{ + /* only open once */ + if (atomic_inc_return(&wdrtas_miscdev_open) > 1) { + atomic_dec(&wdrtas_miscdev_open); + return -EBUSY; + } + + wdrtas_timer_start(); + wdrtas_timer_keepalive(); + + return nonseekable_open(inode, file); +} + +/** + * wdrtas_close - close function of watchdog device + * @inode: inode structure + * @file: file structure + * + * returns 0 on success + * + * close function. Always succeeds + */ +static int +wdrtas_close(struct inode *inode, struct file *file) +{ + /* only stop watchdog, if this was announced using 'V' before */ + if (wdrtas_expect_close == WDRTAS_MAGIC_CHAR) + wdrtas_timer_stop(); + else { + printk(KERN_WARNING "wdrtas: got unexpected close. Watchdog " + "not stopped.\n"); + wdrtas_timer_keepalive(); + } + + wdrtas_expect_close = 0; + atomic_dec(&wdrtas_miscdev_open); + return 0; +} + +/** + * wdrtas_temp_read - gives back the temperature in fahrenheit + * @file: file structure + * @buf: user buffer + * @count: number of bytes to be read + * @ppos: position in file + * + * returns always 1 or -EFAULT in case of user space copy failures, <0 on + * other failures + * + * wdrtas_temp_read gives the temperature to the users by copying this + * value as one byte into the user space buffer. The unit is Fahrenheit... + */ +static ssize_t +wdrtas_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + int temperature = 0; + + temperature = wdrtas_get_temperature(); + if (temperature < 0) + return temperature; + + if (copy_to_user(buf, &temperature, 1)) + return -EFAULT; + + return 1; +} + +/** + * wdrtas_temp_open - open function of temperature device + * @inode: inode structure + * @file: file structure + * + * returns 0 on success, <0 on failure + * + * function called when temperature device is opened + */ +static int +wdrtas_temp_open(struct inode *inode, struct file *file) +{ + return nonseekable_open(inode, file); +} + +/** + * wdrtas_temp_close - close function of temperature device + * @inode: inode structure + * @file: file structure + * + * returns 0 on success + * + * close function. Always succeeds + */ +static int +wdrtas_temp_close(struct inode *inode, struct file *file) +{ + return 0; +} + +/** + * wdrtas_reboot - reboot notifier function + * @nb: notifier block structure + * @code: reboot code + * @ptr: unused + * + * returns NOTIFY_DONE + * + * wdrtas_reboot stops the watchdog in case of a reboot + */ +static int +wdrtas_reboot(struct notifier_block *this, unsigned long code, void *ptr) +{ + if ( (code==SYS_DOWN) || (code==SYS_HALT) ) + wdrtas_timer_stop(); + + return NOTIFY_DONE; +} + +/*** initialization stuff */ + +static struct file_operations wdrtas_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wdrtas_write, + .ioctl = wdrtas_ioctl, + .open = wdrtas_open, + .release = wdrtas_close, +}; + +static struct miscdevice wdrtas_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdrtas_fops, +}; + +static struct file_operations wdrtas_temp_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = wdrtas_temp_read, + .open = wdrtas_temp_open, + .release = wdrtas_temp_close, +}; + +static struct miscdevice wdrtas_tempdev = { + .minor = TEMP_MINOR, + .name = "temperature", + .fops = &wdrtas_temp_fops, +}; + +static struct notifier_block wdrtas_notifier = { + .notifier_call = wdrtas_reboot, +}; + +/** + * wdrtas_get_tokens - reads in RTAS tokens + * + * returns 0 on succes, <0 on failure + * + * wdrtas_get_tokens reads in the tokens for the RTAS calls used in + * this watchdog driver. It tolerates, if "get-sensor-state" and + * "ibm,get-system-parameter" are not available. + */ +static int +wdrtas_get_tokens(void) +{ + wdrtas_token_get_sensor_state = rtas_token("get-sensor-state"); + if (wdrtas_token_get_sensor_state == RTAS_UNKNOWN_SERVICE) { + printk(KERN_WARNING "wdrtas: couldn't get token for " + "get-sensor-state. Trying to continue without " + "temperature support.\n"); + } + + wdrtas_token_get_sp = rtas_token("ibm,get-system-parameter"); + if (wdrtas_token_get_sp == RTAS_UNKNOWN_SERVICE) { + printk(KERN_WARNING "wdrtas: couldn't get token for " + "ibm,get-system-parameter. Trying to continue with " + "a default timeout value of %i seconds.\n", + WDRTAS_DEFAULT_INTERVAL); + } + + wdrtas_token_set_indicator = rtas_token("set-indicator"); + if (wdrtas_token_set_indicator == RTAS_UNKNOWN_SERVICE) { + printk(KERN_ERR "wdrtas: couldn't get token for " + "set-indicator. Terminating watchdog code.\n"); + return -EIO; + } + + wdrtas_token_event_scan = rtas_token("event-scan"); + if (wdrtas_token_event_scan == RTAS_UNKNOWN_SERVICE) { + printk(KERN_ERR "wdrtas: couldn't get token for event-scan. " + "Terminating watchdog code.\n"); + return -EIO; + } + + return 0; +} + +/** + * wdrtas_unregister_devs - unregisters the misc dev handlers + * + * wdrtas_register_devs unregisters the watchdog and temperature watchdog + * misc devs + */ +static void +wdrtas_unregister_devs(void) +{ + misc_deregister(&wdrtas_miscdev); + if (wdrtas_token_get_sensor_state != RTAS_UNKNOWN_SERVICE) + misc_deregister(&wdrtas_tempdev); +} + +/** + * wdrtas_register_devs - registers the misc dev handlers + * + * returns 0 on succes, <0 on failure + * + * wdrtas_register_devs registers the watchdog and temperature watchdog + * misc devs + */ +static int +wdrtas_register_devs(void) +{ + int result; + + result = misc_register(&wdrtas_miscdev); + if (result) { + printk(KERN_ERR "wdrtas: couldn't register watchdog misc " + "device. Terminating watchdog code.\n"); + return result; + } + + if (wdrtas_token_get_sensor_state != RTAS_UNKNOWN_SERVICE) { + result = misc_register(&wdrtas_tempdev); + if (result) { + printk(KERN_WARNING "wdrtas: couldn't register " + "watchdog temperature misc device. Continuing " + "without temperature support.\n"); + wdrtas_token_get_sensor_state = RTAS_UNKNOWN_SERVICE; + } + } + + return 0; +} + +/** + * wdrtas_init - init function of the watchdog driver + * + * returns 0 on succes, <0 on failure + * + * registers the file handlers and the reboot notifier + */ +static int __init +wdrtas_init(void) +{ + if (wdrtas_get_tokens()) + return -ENODEV; + + if (wdrtas_register_devs()) + return -ENODEV; + + if (register_reboot_notifier(&wdrtas_notifier)) { + printk(KERN_ERR "wdrtas: could not register reboot notifier. " + "Terminating watchdog code.\n"); + wdrtas_unregister_devs(); + return -ENODEV; + } + + if (wdrtas_token_get_sp == RTAS_UNKNOWN_SERVICE) + wdrtas_interval = WDRTAS_DEFAULT_INTERVAL; + else + wdrtas_interval = wdrtas_get_interval(WDRTAS_DEFAULT_INTERVAL); + + return 0; +} + +/** + * wdrtas_exit - exit function of the watchdog driver + * + * unregisters the file handlers and the reboot notifier + */ +static void __exit +wdrtas_exit(void) +{ + if (!wdrtas_nowayout) + wdrtas_timer_stop(); + + wdrtas_unregister_devs(); + + unregister_reboot_notifier(&wdrtas_notifier); +} + +module_init(wdrtas_init); +module_exit(wdrtas_exit); -- cgit 1.2.3-korg From fef1c772fa154c16e0a54577e9ecb5480f7b937e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Jun 2005 09:43:37 +1000 Subject: [PATCH] ppc64: add BPA platform type This adds the basic support for running on BPA machines. So far, this is only the IBM workstation, and it will not run on others without a little more generalization. It should be possible to configure a kernel for any combination of CONFIG_PPC_BPA with any of the other multiplatform targets. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- MAINTAINERS | 7 ++ arch/ppc64/Kconfig | 6 +- arch/ppc64/Makefile | 2 + arch/ppc64/kernel/Makefile | 3 + arch/ppc64/kernel/bpa_setup.c | 135 +++++++++++++++++++++++++++++++++++ arch/ppc64/kernel/cpu_setup_power4.S | 16 ++++- arch/ppc64/kernel/cputable.c | 11 +++ arch/ppc64/kernel/irq.c | 3 + arch/ppc64/kernel/proc_ppc64.c | 2 +- arch/ppc64/kernel/prom_init.c | 4 +- arch/ppc64/kernel/setup.c | 4 ++ arch/ppc64/kernel/traps.c | 4 ++ include/asm-ppc64/mmu.h | 5 +- include/asm-ppc64/processor.h | 15 +++- include/asm-ppc64/smp.h | 8 +++ 15 files changed, 216 insertions(+), 9 deletions(-) create mode 100644 arch/ppc64/kernel/bpa_setup.c diff --git a/MAINTAINERS b/MAINTAINERS index 4d44824884efc..5eaa6807cdb7b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -504,6 +504,13 @@ L: bonding-devel@lists.sourceforge.net W: http://sourceforge.net/projects/bonding/ S: Supported +BROADBAND PROCESSOR ARCHITECTURE +P: Arnd Bergmann +M: arnd@arndb.de +L: linuxppc64-dev@ozlabs.org +W: http://linuxppc64.org +S: Supported + BTTV VIDEO4LINUX DRIVER P: Gerd Knorr M: kraxel@bytesex.org diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 0f1fa289744ea..c7f2f0a4d8567 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -77,6 +77,10 @@ config PPC_PSERIES bool " IBM pSeries & new iSeries" default y +config PPC_BPA + bool " Broadband Processor Architecture" + depends on PPC_MULTIPLATFORM + config PPC_PMAC depends on PPC_MULTIPLATFORM bool " Apple G5 based machines" @@ -256,7 +260,7 @@ config MSCHUNKS config PPC_RTAS bool - depends on PPC_PSERIES + depends on PPC_PSERIES || PPC_BPA default y config RTAS_PROC diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index 33c752ceca4b9..731b84758331b 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -90,12 +90,14 @@ boot := arch/ppc64/boot boottarget-$(CONFIG_PPC_PSERIES) := zImage zImage.initrd boottarget-$(CONFIG_PPC_MAPLE) := zImage zImage.initrd boottarget-$(CONFIG_PPC_ISERIES) := vmlinux.sminitrd vmlinux.initrd vmlinux.sm +boottarget-$(CONFIG_PPC_BPA) := zImage zImage.initrd $(boottarget-y): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage bootimage-$(CONFIG_PPC_PMAC) := vmlinux bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage +bootimage-$(CONFIG_PPC_BPA) := zImage bootimage-$(CONFIG_PPC_ISERIES) := vmlinux BOOTIMAGE := $(bootimage-y) install: vmlinux diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index f389f2453daa1..c89983ab90983 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -33,6 +33,8 @@ obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \ pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \ xics.o pSeries_setup.o pSeries_iommu.o +obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_nvram.o + obj-$(CONFIG_EEH) += eeh.o obj-$(CONFIG_PROC_FS) += proc_ppc64.o obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o @@ -59,6 +61,7 @@ ifdef CONFIG_SMP obj-$(CONFIG_PPC_PMAC) += pmac_smp.o smp-tbsync.o obj-$(CONFIG_PPC_ISERIES) += iSeries_smp.o obj-$(CONFIG_PPC_PSERIES) += pSeries_smp.o +obj-$(CONFIG_PPC_BPA) += pSeries_smp.o obj-$(CONFIG_PPC_MAPLE) += smp-tbsync.o endif diff --git a/arch/ppc64/kernel/bpa_setup.c b/arch/ppc64/kernel/bpa_setup.c new file mode 100644 index 0000000000000..d1992dd2d61b9 --- /dev/null +++ b/arch/ppc64/kernel/bpa_setup.c @@ -0,0 +1,135 @@ +/* + * linux/arch/ppc/kernel/bpa_setup.c + * + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified by PPC64 Team, IBM Corp + * Modified by BPA Team, IBM Deutschland Entwicklung GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pci.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +void bpa_get_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *model = ""; + + root = of_find_node_by_path("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: BPA %s\n", model); + of_node_put(root); +} + +static void bpa_progress(char *s, unsigned short hex) +{ + printk("*** %04x : %s\n", hex, s ? s : ""); +} + +static void __init bpa_setup_arch(void) +{ +#ifdef CONFIG_SMP + smp_init_pSeries(); +#endif + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + if (ROOT_DEV == 0) { + printk("No ramdisk, default root is /dev/hda2\n"); + ROOT_DEV = Root_HDA2; + } + + /* Find and initialize PCI host bridges */ + init_pci_config_tokens(); + find_and_init_phbs(); + +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + bpa_nvram_init(); +} + +/* + * Early initialization. Relocation is on but do not reference unbolted pages + */ +static void __init bpa_init_early(void) +{ + DBG(" -> bpa_init_early()\n"); + + hpte_init_native(); + + pci_direct_iommu_init(); + + ppc64_interrupt_controller = IC_BPA_IIC; + + DBG(" <- bpa_init_early()\n"); +} + + +static int __init bpa_probe(int platform) +{ + if (platform != PLATFORM_BPA) + return 0; + + return 1; +} + +struct machdep_calls __initdata bpa_md = { + .probe = bpa_probe, + .setup_arch = bpa_setup_arch, + .init_early = bpa_init_early, + .get_cpuinfo = bpa_get_cpuinfo, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .get_boot_time = rtas_get_boot_time, + .get_rtc_time = rtas_get_rtc_time, + .set_rtc_time = rtas_set_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = bpa_progress, +}; diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/ppc64/kernel/cpu_setup_power4.S index 3bd9518208500..42fc08cf87a03 100644 --- a/arch/ppc64/kernel/cpu_setup_power4.S +++ b/arch/ppc64/kernel/cpu_setup_power4.S @@ -73,7 +73,21 @@ _GLOBAL(__970_cpu_preinit) _GLOBAL(__setup_cpu_power4) blr - + +_GLOBAL(__setup_cpu_be) + /* Set large page sizes LP=0: 16MB, LP=1: 64KB */ + addi r3, 0, 0 + ori r3, r3, HID6_LB + sldi r3, r3, 32 + nor r3, r3, r3 + mfspr r4, SPRN_HID6 + and r4, r4, r3 + addi r3, 0, 0x02000 + sldi r3, r3, 32 + or r4, r4, r3 + mtspr SPRN_HID6, r4 + blr + _GLOBAL(__setup_cpu_ppc970) mfspr r0,SPRN_HID0 li r11,5 /* clear DOZE and SLEEP */ diff --git a/arch/ppc64/kernel/cputable.c b/arch/ppc64/kernel/cputable.c index 8644a8648058e..1d162c7c59dfb 100644 --- a/arch/ppc64/kernel/cputable.c +++ b/arch/ppc64/kernel/cputable.c @@ -34,6 +34,7 @@ EXPORT_SYMBOL(cur_cpu_spec); extern void __setup_cpu_power3(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_power4(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_be(unsigned long offset, struct cpu_spec* spec); /* We only set the altivec features if the kernel was compiled with altivec @@ -162,6 +163,16 @@ struct cpu_spec cpu_specs[] = { __setup_cpu_power4, COMMON_PPC64_FW }, + { /* BE DD1.x */ + 0xffff0000, 0x00700000, "Broadband Engine", + CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | + CPU_FTR_SMT, + COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP, + 128, 128, + __setup_cpu_be, + COMMON_PPC64_FW + }, { /* default match */ 0x00000000, 0x00000000, "POWER4 (compatible)", CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c index d860467b8f096..3defc8c33adf5 100644 --- a/arch/ppc64/kernel/irq.c +++ b/arch/ppc64/kernel/irq.c @@ -395,6 +395,9 @@ int virt_irq_create_mapping(unsigned int real_irq) if (ppc64_interrupt_controller == IC_OPEN_PIC) return real_irq; /* no mapping for openpic (for now) */ + if (ppc64_interrupt_controller == IC_BPA_IIC) + return real_irq; /* no mapping for iic either */ + /* don't map interrupts < MIN_VIRT_IRQ */ if (real_irq < MIN_VIRT_IRQ) { virt_irq_to_real_map[real_irq] = real_irq; diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/ppc64/kernel/proc_ppc64.c index 0914b0669b05e..a87c66a9652ad 100644 --- a/arch/ppc64/kernel/proc_ppc64.c +++ b/arch/ppc64/kernel/proc_ppc64.c @@ -53,7 +53,7 @@ static int __init proc_ppc64_create(void) if (!root) return 1; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_BPA))) return 0; if (!proc_mkdir("rtas", root)) diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index b7683abfbe6a5..e248a7950aebd 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1915,9 +1915,9 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long prom_send_capabilities(); /* - * On pSeries, copy the CPU hold code + * On pSeries and BPA, copy the CPU hold code */ - if (RELOC(of_platform) & PLATFORM_PSERIES) + if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_BPA)) copy_and_flush(0, KERNELBASE - offset, 0x100, 0); /* diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 93b0ee88cda1e..10222008fe20a 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -344,6 +344,7 @@ static void __init setup_cpu_maps(void) extern struct machdep_calls pSeries_md; extern struct machdep_calls pmac_md; extern struct machdep_calls maple_md; +extern struct machdep_calls bpa_md; /* Ultimately, stuff them in an elf section like initcalls... */ static struct machdep_calls __initdata *machines[] = { @@ -356,6 +357,9 @@ static struct machdep_calls __initdata *machines[] = { #ifdef CONFIG_PPC_MAPLE &maple_md, #endif /* CONFIG_PPC_MAPLE */ +#ifdef CONFIG_PPC_BPA + &bpa_md, +#endif NULL }; diff --git a/arch/ppc64/kernel/traps.c b/arch/ppc64/kernel/traps.c index 7e52cb2605e02..a8d5e83ee89fc 100644 --- a/arch/ppc64/kernel/traps.c +++ b/arch/ppc64/kernel/traps.c @@ -126,6 +126,10 @@ int die(const char *str, struct pt_regs *regs, long err) printk("POWERMAC "); nl = 1; break; + case PLATFORM_BPA: + printk("BPA "); + nl = 1; + break; } if (nl) printk("\n"); diff --git a/include/asm-ppc64/mmu.h b/include/asm-ppc64/mmu.h index c78282a67d8ed..9d03a98a4fa30 100644 --- a/include/asm-ppc64/mmu.h +++ b/include/asm-ppc64/mmu.h @@ -47,9 +47,10 @@ #define SLB_VSID_KS ASM_CONST(0x0000000000000800) #define SLB_VSID_KP ASM_CONST(0x0000000000000400) #define SLB_VSID_N ASM_CONST(0x0000000000000200) /* no-execute */ -#define SLB_VSID_L ASM_CONST(0x0000000000000100) /* largepage 16M */ +#define SLB_VSID_L ASM_CONST(0x0000000000000100) /* largepage */ #define SLB_VSID_C ASM_CONST(0x0000000000000080) /* class */ - +#define SLB_VSID_LS ASM_CONST(0x0000000000000070) /* size of largepage */ + #define SLB_VSID_KERNEL (SLB_VSID_KP|SLB_VSID_C) #define SLB_VSID_USER (SLB_VSID_KP|SLB_VSID_KS) diff --git a/include/asm-ppc64/processor.h b/include/asm-ppc64/processor.h index 3084099086a82..af28aa55d8c1f 100644 --- a/include/asm-ppc64/processor.h +++ b/include/asm-ppc64/processor.h @@ -138,8 +138,16 @@ #define SPRN_NIADORM 0x3F3 /* Hardware Implementation Register 2 */ #define SPRN_HID4 0x3F4 /* 970 HID4 */ #define SPRN_HID5 0x3F6 /* 970 HID5 */ -#define SPRN_TSC 0x3FD /* Thread switch control */ -#define SPRN_TST 0x3FC /* Thread switch timeout */ +#define SPRN_HID6 0x3F9 /* BE HID 6 */ +#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */ +#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */ +#define SPRN_TSCR 0x399 /* Thread switch control on BE */ +#define SPRN_TTR 0x39A /* Thread switch timeout on BE */ +#define TSCR_DEC_ENABLE 0x200000 /* Decrementer Interrupt */ +#define TSCR_EE_ENABLE 0x100000 /* External Interrupt */ +#define TSCR_EE_BOOST 0x080000 /* External Interrupt Boost */ +#define SPRN_TSC 0x3FD /* Thread switch control on others */ +#define SPRN_TST 0x3FC /* Thread switch timeout on others */ #define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ #define SPRN_LR 0x008 /* Link Register */ #define SPRN_PIR 0x3FF /* Processor Identification Register */ @@ -259,6 +267,7 @@ #define PV_970FX 0x003C #define PV_630 0x0040 #define PV_630p 0x0041 +#define PV_BE 0x0070 /* Platforms supported by PPC64 */ #define PLATFORM_PSERIES 0x0100 @@ -267,6 +276,7 @@ #define PLATFORM_LPAR 0x0001 #define PLATFORM_POWERMAC 0x0400 #define PLATFORM_MAPLE 0x0500 +#define PLATFORM_BPA 0x1000 /* Compatibility with drivers coming from PPC32 world */ #define _machine (systemcfg->platform) @@ -278,6 +288,7 @@ #define IC_INVALID 0 #define IC_OPEN_PIC 1 #define IC_PPC_XIC 2 +#define IC_BPA_IIC 3 #define XGLUE(a,b) a##b #define GLUE(a,b) XGLUE(a,b) diff --git a/include/asm-ppc64/smp.h b/include/asm-ppc64/smp.h index 8115ecb8feee2..d86f742e9a219 100644 --- a/include/asm-ppc64/smp.h +++ b/include/asm-ppc64/smp.h @@ -85,6 +85,14 @@ extern void smp_generic_take_timebase(void); extern struct smp_ops_t *smp_ops; +#ifdef CONFIG_PPC_PSERIES +void vpa_init(int cpu); +#else +static inline void vpa_init(int cpu) +{ +} +#endif /* CONFIG_PPC_PSERIES */ + #endif /* __ASSEMBLY__ */ #endif /* !(_PPC64_SMP_H) */ -- cgit 1.2.3-korg From cebf589c822b5de87098b57644024d16f8dbc1bb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Jun 2005 09:43:43 +1000 Subject: [PATCH] ppc64: Add driver for BPA interrupt controllers Add support for the integrated interrupt controller on BPA CPUs. There is one of those for each SMT thread. The mapping of interrupt numbers to HW interrupt sources is described in arch/ppc64/kernel/bpa_iic.h. This version hardcodes the 'Spider' chip as the secondary interrupt controller. That is not really generic for the architecture, but at the moment it is the only secondary PIC that exists. A little more work will be needed on this as soon as we have boards with multiple external interrupt controllers. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/ppc64/Kconfig | 15 +++ arch/ppc64/kernel/Makefile | 8 +- arch/ppc64/kernel/bpa_iic.c | 270 ++++++++++++++++++++++++++++++++++++++++ arch/ppc64/kernel/bpa_iic.h | 62 +++++++++ arch/ppc64/kernel/bpa_setup.c | 6 +- arch/ppc64/kernel/pSeries_smp.c | 69 +++++++++- arch/ppc64/kernel/smp.c | 4 +- arch/ppc64/kernel/spider-pic.c | 191 ++++++++++++++++++++++++++++ 8 files changed, 614 insertions(+), 11 deletions(-) create mode 100644 arch/ppc64/kernel/bpa_iic.c create mode 100644 arch/ppc64/kernel/bpa_iic.h create mode 100644 arch/ppc64/kernel/spider-pic.c diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index c7f2f0a4d8567..bae56ec76ea71 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -110,6 +110,21 @@ config PPC_OF bool default y +config XICS + depends on PPC_PSERIES + bool + default y + +config MPIC + depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE + bool + default y + +config BPA_IIC + depends on PPC_BPA + bool + default y + # VMX is pSeries only for now until somebody writes the iSeries # exception vectors for it config ALTIVEC diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index c89983ab90983..bc58d80ee3d07 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -27,13 +27,13 @@ obj-$(CONFIG_PPC_ISERIES) += HvCall.o HvLpConfig.o LparData.o \ mf.o HvLpEvent.o iSeries_proc.o iSeries_htab.o \ iSeries_iommu.o -obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o mpic.o +obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \ pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \ - xics.o pSeries_setup.o pSeries_iommu.o + pSeries_setup.o pSeries_iommu.o -obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_nvram.o +obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_nvram.o bpa_iic.o spider-pic.o obj-$(CONFIG_EEH) += eeh.o obj-$(CONFIG_PROC_FS) += proc_ppc64.o @@ -49,6 +49,8 @@ obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_HVCS) += hvcserver.o obj-$(CONFIG_IBMVIO) += vio.o +obj-$(CONFIG_XICS) += xics.o +obj-$(CONFIG_MPIC) += mpic.o obj-$(CONFIG_PPC_PMAC) += pmac_setup.o pmac_feature.o pmac_pci.o \ pmac_time.o pmac_nvram.o pmac_low_i2c.o diff --git a/arch/ppc64/kernel/bpa_iic.c b/arch/ppc64/kernel/bpa_iic.c new file mode 100644 index 0000000000000..c8f3dc3fad70a --- /dev/null +++ b/arch/ppc64/kernel/bpa_iic.c @@ -0,0 +1,270 @@ +/* + * BPA Internal Interrupt Controller + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "bpa_iic.h" + +struct iic_pending_bits { + u32 data; + u8 flags; + u8 class; + u8 source; + u8 prio; +}; + +enum iic_pending_flags { + IIC_VALID = 0x80, + IIC_IPI = 0x40, +}; + +struct iic_regs { + struct iic_pending_bits pending; + struct iic_pending_bits pending_destr; + u64 generate; + u64 prio; +}; + +struct iic { + struct iic_regs __iomem *regs; +}; + +static DEFINE_PER_CPU(struct iic, iic); + +void iic_local_enable(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0xff); +} + +void iic_local_disable(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0x0); +} + +static unsigned int iic_startup(unsigned int irq) +{ + return 0; +} + +static void iic_enable(unsigned int irq) +{ + iic_local_enable(); +} + +static void iic_disable(unsigned int irq) +{ +} + +static void iic_end(unsigned int irq) +{ + iic_local_enable(); +} + +static struct hw_interrupt_type iic_pic = { + .typename = " BPA-IIC ", + .startup = iic_startup, + .enable = iic_enable, + .disable = iic_disable, + .end = iic_end, +}; + +static int iic_external_get_irq(struct iic_pending_bits pending) +{ + int irq; + unsigned char node, unit; + + node = pending.source >> 4; + unit = pending.source & 0xf; + irq = -1; + + /* + * This mapping is specific to the Broadband + * Engine. We might need to get the numbers + * from the device tree to support future CPUs. + */ + switch (unit) { + case 0x00: + case 0x0b: + /* + * One of these units can be connected + * to an external interrupt controller. + */ + if (pending.prio > 0x3f || + pending.class != 2) + break; + irq = IIC_EXT_OFFSET + + spider_get_irq(pending.prio + node * IIC_NODE_STRIDE) + + node * IIC_NODE_STRIDE; + break; + case 0x01 ... 0x04: + case 0x07 ... 0x0a: + /* + * These units are connected to the SPEs + */ + if (pending.class > 2) + break; + irq = IIC_SPE_OFFSET + + pending.class * IIC_CLASS_STRIDE + + node * IIC_NODE_STRIDE + + unit; + break; + } + if (irq == -1) + printk(KERN_WARNING "Unexpected interrupt class %02x, " + "source %02x, prio %02x, cpu %02x\n", pending.class, + pending.source, pending.prio, smp_processor_id()); + return irq; +} + +/* Get an IRQ number from the pending state register of the IIC */ +int iic_get_irq(struct pt_regs *regs) +{ + struct iic *iic; + int irq; + struct iic_pending_bits pending; + + iic = &__get_cpu_var(iic); + *(unsigned long *) &pending = + in_be64((unsigned long __iomem *) &iic->regs->pending_destr); + + irq = -1; + if (pending.flags & IIC_VALID) { + if (pending.flags & IIC_IPI) { + irq = IIC_IPI_OFFSET + (pending.prio >> 4); +/* + if (irq > 0x80) + printk(KERN_WARNING "Unexpected IPI prio %02x" + "on CPU %02x\n", pending.prio, + smp_processor_id()); +*/ + } else { + irq = iic_external_get_irq(pending); + } + } + return irq; +} + +static struct iic_regs __iomem *find_iic(int cpu) +{ + struct device_node *np; + int nodeid = cpu / 2; + unsigned long regs; + struct iic_regs __iomem *iic_regs; + + for (np = of_find_node_by_type(NULL, "cpu"); + np; + np = of_find_node_by_type(np, "cpu")) { + if (nodeid == *(int *)get_property(np, "node-id", NULL)) + break; + } + + if (!np) { + printk(KERN_WARNING "IIC: CPU %d not found\n", cpu); + iic_regs = NULL; + } else { + regs = *(long *)get_property(np, "iic", NULL); + + /* hack until we have decided on the devtree info */ + regs += 0x400; + if (cpu & 1) + regs += 0x20; + + printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs); + iic_regs = __ioremap(regs, sizeof(struct iic_regs), + _PAGE_NO_CACHE); + } + return iic_regs; +} + +#ifdef CONFIG_SMP +void iic_setup_cpu(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0xff); +} + +void iic_cause_IPI(int cpu, int mesg) +{ + out_be64(&per_cpu(iic, cpu).regs->generate, mesg); +} + +static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) +{ + + smp_message_recv(irq - IIC_IPI_OFFSET, regs); + return IRQ_HANDLED; +} + +static void iic_request_ipi(int irq, const char *name) +{ + /* IPIs are marked SA_INTERRUPT as they must run with irqs + * disabled */ + get_irq_desc(irq)->handler = &iic_pic; + get_irq_desc(irq)->status |= IRQ_PER_CPU; + request_irq(irq, iic_ipi_action, SA_INTERRUPT, name, NULL); +} + +void iic_request_IPIs(void) +{ + iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_CALL_FUNCTION, "IPI-call"); + iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_RESCHEDULE, "IPI-resched"); +#ifdef CONFIG_DEBUGGER + iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); +#endif /* CONFIG_DEBUGGER */ +} +#endif /* CONFIG_SMP */ + +static void iic_setup_spe_handlers(void) +{ + int be, isrc; + + /* Assume two threads per BE are present */ + for (be=0; be < num_present_cpus() / 2; be++) { + for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) { + int irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc; + get_irq_desc(irq)->handler = &iic_pic; + } + } +} + +void iic_init_IRQ(void) +{ + int cpu, irq_offset; + struct iic *iic; + + irq_offset = 0; + for_each_cpu(cpu) { + iic = &per_cpu(iic, cpu); + iic->regs = find_iic(cpu); + if (iic->regs) + out_be64(&iic->regs->prio, 0xff); + } + iic_setup_spe_handlers(); +} diff --git a/arch/ppc64/kernel/bpa_iic.h b/arch/ppc64/kernel/bpa_iic.h new file mode 100644 index 0000000000000..6833c30221668 --- /dev/null +++ b/arch/ppc64/kernel/bpa_iic.h @@ -0,0 +1,62 @@ +#ifndef ASM_BPA_IIC_H +#define ASM_BPA_IIC_H +#ifdef __KERNEL__ +/* + * Mapping of IIC pending bits into per-node + * interrupt numbers. + * + * IRQ FF CC SS PP FF CC SS PP Description + * + * 00-3f 80 02 +0 00 - 80 02 +0 3f South Bridge + * 00-3f 80 02 +b 00 - 80 02 +b 3f South Bridge + * 41-4a 80 00 +1 ** - 80 00 +a ** SPU Class 0 + * 51-5a 80 01 +1 ** - 80 01 +a ** SPU Class 1 + * 61-6a 80 02 +1 ** - 80 02 +a ** SPU Class 2 + * 70-7f C0 ** ** 00 - C0 ** ** 0f IPI + * + * F flags + * C class + * S source + * P Priority + * + node number + * * don't care + * + * A node consists of a Broadband Engine and an optional + * south bridge device providing a maximum of 64 IRQs. + * The south bridge may be connected to either IOIF0 + * or IOIF1. + * Each SPE is represented as three IRQ lines, one per + * interrupt class. + * 16 IRQ numbers are reserved for inter processor + * interruptions, although these are only used in the + * range of the first node. + * + * This scheme needs 128 IRQ numbers per BIF node ID, + * which means that with the total of 512 lines + * available, we can have a maximum of four nodes. + */ + +enum { + IIC_EXT_OFFSET = 0x00, /* Start of south bridge IRQs */ + IIC_NUM_EXT = 0x40, /* Number of south bridge IRQs */ + IIC_SPE_OFFSET = 0x40, /* Start of SPE interrupts */ + IIC_CLASS_STRIDE = 0x10, /* SPE IRQs per class */ + IIC_IPI_OFFSET = 0x70, /* Start of IPI IRQs */ + IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */ + IIC_NODE_STRIDE = 0x80, /* Total IRQs per node */ +}; + +extern void iic_init_IRQ(void); +extern int iic_get_irq(struct pt_regs *regs); +extern void iic_cause_IPI(int cpu, int mesg); +extern void iic_request_IPIs(void); +extern void iic_setup_cpu(void); +extern void iic_local_enable(void); +extern void iic_local_disable(void); + + +extern void spider_init_IRQ(void); +extern int spider_get_irq(unsigned long int_pending); + +#endif +#endif /* ASM_BPA_IIC_H */ diff --git a/arch/ppc64/kernel/bpa_setup.c b/arch/ppc64/kernel/bpa_setup.c index d1992dd2d61b9..0a43d8a93d765 100644 --- a/arch/ppc64/kernel/bpa_setup.c +++ b/arch/ppc64/kernel/bpa_setup.c @@ -45,6 +45,7 @@ #include #include "pci.h" +#include "bpa_iic.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -71,6 +72,9 @@ static void bpa_progress(char *s, unsigned short hex) static void __init bpa_setup_arch(void) { + ppc_md.init_IRQ = iic_init_IRQ; + ppc_md.get_irq = iic_get_irq; + #ifdef CONFIG_SMP smp_init_pSeries(); #endif @@ -86,7 +90,7 @@ static void __init bpa_setup_arch(void) /* Find and initialize PCI host bridges */ init_pci_config_tokens(); find_and_init_phbs(); - + spider_init_IRQ(); #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #endif diff --git a/arch/ppc64/kernel/pSeries_smp.c b/arch/ppc64/kernel/pSeries_smp.c index 4203bd020c828..30154140f7e24 100644 --- a/arch/ppc64/kernel/pSeries_smp.c +++ b/arch/ppc64/kernel/pSeries_smp.c @@ -1,5 +1,5 @@ /* - * SMP support for pSeries machines. + * SMP support for pSeries and BPA machines. * * Dave Engebretsen, Peter Bergner, and * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com @@ -47,6 +47,7 @@ #include #include "mpic.h" +#include "bpa_iic.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -286,6 +287,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) return 1; } +#ifdef CONFIG_XICS static inline void smp_xics_do_message(int cpu, int msg) { set_bit(msg, &xics_ipi_message[cpu].value); @@ -327,6 +329,37 @@ static void __devinit smp_xics_setup_cpu(int cpu) cpu_clear(cpu, of_spin_map); } +#endif /* CONFIG_XICS */ +#ifdef CONFIG_BPA_IIC +static void smp_iic_message_pass(int target, int msg) +{ + unsigned int i; + + if (target < NR_CPUS) { + iic_cause_IPI(target, msg); + } else { + for_each_online_cpu(i) { + if (target == MSG_ALL_BUT_SELF + && i == smp_processor_id()) + continue; + iic_cause_IPI(i, msg); + } + } +} + +static int __init smp_iic_probe(void) +{ + iic_request_IPIs(); + + return cpus_weight(cpu_possible_map); +} + +static void __devinit smp_iic_setup_cpu(int cpu) +{ + if (cpu != boot_cpuid) + iic_setup_cpu(); +} +#endif /* CONFIG_BPA_IIC */ static DEFINE_SPINLOCK(timebase_lock); static unsigned long timebase = 0; @@ -381,14 +414,15 @@ static int smp_pSeries_cpu_bootable(unsigned int nr) return 1; } - +#ifdef CONFIG_MPIC static struct smp_ops_t pSeries_mpic_smp_ops = { .message_pass = smp_mpic_message_pass, .probe = smp_mpic_probe, .kick_cpu = smp_pSeries_kick_cpu, .setup_cpu = smp_mpic_setup_cpu, }; - +#endif +#ifdef CONFIG_XICS static struct smp_ops_t pSeries_xics_smp_ops = { .message_pass = smp_xics_message_pass, .probe = smp_xics_probe, @@ -396,6 +430,16 @@ static struct smp_ops_t pSeries_xics_smp_ops = { .setup_cpu = smp_xics_setup_cpu, .cpu_bootable = smp_pSeries_cpu_bootable, }; +#endif +#ifdef CONFIG_BPA_IIC +static struct smp_ops_t bpa_iic_smp_ops = { + .message_pass = smp_iic_message_pass, + .probe = smp_iic_probe, + .kick_cpu = smp_pSeries_kick_cpu, + .setup_cpu = smp_iic_setup_cpu, + .cpu_bootable = smp_pSeries_cpu_bootable, +}; +#endif /* This is called very early */ void __init smp_init_pSeries(void) @@ -404,10 +448,25 @@ void __init smp_init_pSeries(void) DBG(" -> smp_init_pSeries()\n"); - if (ppc64_interrupt_controller == IC_OPEN_PIC) + switch (ppc64_interrupt_controller) { +#ifdef CONFIG_MPIC + case IC_OPEN_PIC: smp_ops = &pSeries_mpic_smp_ops; - else + break; +#endif +#ifdef CONFIG_XICS + case IC_PPC_XIC: smp_ops = &pSeries_xics_smp_ops; + break; +#endif +#ifdef CONFIG_BPA_IIC + case IC_BPA_IIC: + smp_ops = &bpa_iic_smp_ops; + break; +#endif + default: + panic("Invalid interrupt controller"); + } #ifdef CONFIG_HOTPLUG_CPU smp_ops->cpu_disable = pSeries_cpu_disable; diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c index 9ef5d36d6b253..2fcddfcb594d9 100644 --- a/arch/ppc64/kernel/smp.c +++ b/arch/ppc64/kernel/smp.c @@ -71,7 +71,7 @@ void smp_call_function_interrupt(void); int smt_enabled_at_boot = 1; -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_MPIC void smp_mpic_message_pass(int target, int msg) { /* make sure we're sending something that translates to an IPI */ @@ -128,7 +128,7 @@ void __devinit smp_generic_kick_cpu(int nr) smp_mb(); } -#endif /* CONFIG_PPC_MULTIPLATFORM */ +#endif /* CONFIG_MPIC */ static void __init smp_space_timers(unsigned int max_cpus) { diff --git a/arch/ppc64/kernel/spider-pic.c b/arch/ppc64/kernel/spider-pic.c new file mode 100644 index 0000000000000..d5c9a02fb119f --- /dev/null +++ b/arch/ppc64/kernel/spider-pic.c @@ -0,0 +1,191 @@ +/* + * External Interrupt Controller on Spider South Bridge + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include +#include +#include + +#include "bpa_iic.h" + +/* register layout taken from Spider spec, table 7.4-4 */ +enum { + TIR_DEN = 0x004, /* Detection Enable Register */ + TIR_MSK = 0x084, /* Mask Level Register */ + TIR_EDC = 0x0c0, /* Edge Detection Clear Register */ + TIR_PNDA = 0x100, /* Pending Register A */ + TIR_PNDB = 0x104, /* Pending Register B */ + TIR_CS = 0x144, /* Current Status Register */ + TIR_LCSA = 0x150, /* Level Current Status Register A */ + TIR_LCSB = 0x154, /* Level Current Status Register B */ + TIR_LCSC = 0x158, /* Level Current Status Register C */ + TIR_LCSD = 0x15c, /* Level Current Status Register D */ + TIR_CFGA = 0x200, /* Setting Register A0 */ + TIR_CFGB = 0x204, /* Setting Register B0 */ + /* 0x208 ... 0x3ff Setting Register An/Bn */ + TIR_PPNDA = 0x400, /* Packet Pending Register A */ + TIR_PPNDB = 0x404, /* Packet Pending Register B */ + TIR_PIERA = 0x408, /* Packet Output Error Register A */ + TIR_PIERB = 0x40c, /* Packet Output Error Register B */ + TIR_PIEN = 0x444, /* Packet Output Enable Register */ + TIR_PIPND = 0x454, /* Packet Output Pending Register */ + TIRDID = 0x484, /* Spider Device ID Register */ + REISTIM = 0x500, /* Reissue Command Timeout Time Setting */ + REISTIMEN = 0x504, /* Reissue Command Timeout Setting */ + REISWAITEN = 0x508, /* Reissue Wait Control*/ +}; + +static void __iomem *spider_pics[4]; + +static void __iomem *spider_get_pic(int irq) +{ + int node = irq / IIC_NODE_STRIDE; + irq %= IIC_NODE_STRIDE; + + if (irq >= IIC_EXT_OFFSET && + irq < IIC_EXT_OFFSET + IIC_NUM_EXT && + spider_pics) + return spider_pics[node]; + return NULL; +} + +static int spider_get_nr(unsigned int irq) +{ + return (irq % IIC_NODE_STRIDE) - IIC_EXT_OFFSET; +} + +static void __iomem *spider_get_irq_config(int irq) +{ + void __iomem *pic; + pic = spider_get_pic(irq); + return pic + TIR_CFGA + 8 * spider_get_nr(irq); +} + +static void spider_enable_irq(unsigned int irq) +{ + void __iomem *cfg = spider_get_irq_config(irq); + irq = spider_get_nr(irq); + + out_be32(cfg, in_be32(cfg) | 0x3107000eu); + out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq); +} + +static void spider_disable_irq(unsigned int irq) +{ + void __iomem *cfg = spider_get_irq_config(irq); + irq = spider_get_nr(irq); + + out_be32(cfg, in_be32(cfg) & ~0x30000000u); +} + +static unsigned int spider_startup_irq(unsigned int irq) +{ + spider_enable_irq(irq); + return 0; +} + +static void spider_shutdown_irq(unsigned int irq) +{ + spider_disable_irq(irq); +} + +static void spider_end_irq(unsigned int irq) +{ + spider_enable_irq(irq); +} + +static void spider_ack_irq(unsigned int irq) +{ + spider_disable_irq(irq); + iic_local_enable(); +} + +static struct hw_interrupt_type spider_pic = { + .typename = " SPIDER ", + .startup = spider_startup_irq, + .shutdown = spider_shutdown_irq, + .enable = spider_enable_irq, + .disable = spider_disable_irq, + .ack = spider_ack_irq, + .end = spider_end_irq, +}; + + +int spider_get_irq(unsigned long int_pending) +{ + void __iomem *regs = spider_get_pic(int_pending); + unsigned long cs; + int irq; + + cs = in_be32(regs + TIR_CS); + + irq = cs >> 24; + if (irq != 63) + return irq; + + return -1; +} + +void spider_init_IRQ(void) +{ + int node; + struct device_node *dn; + unsigned int *property; + long spiderpic; + int n; + +/* FIXME: detect multiple PICs as soon as the device tree has them */ + for (node = 0; node < 1; node++) { + dn = of_find_node_by_path("/"); + n = prom_n_addr_cells(dn); + property = (unsigned int *) get_property(dn, + "platform-spider-pic", NULL); + + if (!property) + continue; + for (spiderpic = 0; n > 0; --n) + spiderpic = (spiderpic << 32) + *property++; + printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic); + spider_pics[node] = __ioremap(spiderpic, 0x800, _PAGE_NO_CACHE); + for (n = 0; n < IIC_NUM_EXT; n++) { + int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE; + get_irq_desc(irq)->handler = &spider_pic; + + /* do not mask any interrupts because of level */ + out_be32(spider_pics[node] + TIR_MSK, 0x0); + + /* disable edge detection clear */ + /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */ + + /* enable interrupt packets to be output */ + out_be32(spider_pics[node] + TIR_PIEN, + in_be32(spider_pics[node] + TIR_PIEN) | 0x1); + + /* Enable the interrupt detection enable bit. Do this last! */ + out_be32(spider_pics[node] + TIR_DEN, + in_be32(spider_pics[node] +TIR_DEN) | 0x1); + + } + } +} -- cgit 1.2.3-korg From ae209cf10086b97e92e39af7cec0f84b21b6fca3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Jun 2005 09:43:54 +1000 Subject: [PATCH] ppc64: Add driver for BPA iommu Implementation of software load support for the BE iommu. This is very different from other iommu code on ppc64, since we only do a static mapping. The mapping is currently hardcoded but should really be read from the firmware, but they don't set up the device nodes yet. There is a single 512MB DMA window for PCI, USB and ethernet at 0x20000000 for our RAM. The Cell processor can put the I/O page table either in memory like the hashed page table (hardware load) or have the operating system write the entries into memory mapped CPU registers (software load). I use the software load mechanism because I know that all I/O page table entries for the amount of installed physical memory fit into the IO TLB cache. At the point when we get machines with more than 4GB of installed memory, we can either use hardware I/O page table access like the other platforms do or dynamically update the I/O TLB entries when a page fault occurs in the I/O subsystem. The software load can then use the macros that I have implemented for the static mapping in order to do the TLB cache updates. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/Makefile | 3 +- arch/ppc64/kernel/bpa_iommu.c | 377 ++++++++++++++++++++++++++++++++++++++++++ arch/ppc64/kernel/bpa_iommu.h | 65 ++++++++ arch/ppc64/kernel/bpa_setup.c | 3 +- 4 files changed, 446 insertions(+), 2 deletions(-) create mode 100644 arch/ppc64/kernel/bpa_iommu.c create mode 100644 arch/ppc64/kernel/bpa_iommu.h diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index bc58d80ee3d07..dffbfb7ac8d50 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -33,7 +33,8 @@ obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \ pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \ pSeries_setup.o pSeries_iommu.o -obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_nvram.o bpa_iic.o spider-pic.o +obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_iommu.o bpa_nvram.o \ + bpa_iic.o spider-pic.o obj-$(CONFIG_EEH) += eeh.o obj-$(CONFIG_PROC_FS) += proc_ppc64.o diff --git a/arch/ppc64/kernel/bpa_iommu.c b/arch/ppc64/kernel/bpa_iommu.c new file mode 100644 index 0000000000000..f33a7bccb0d78 --- /dev/null +++ b/arch/ppc64/kernel/bpa_iommu.c @@ -0,0 +1,377 @@ +/* + * IOMMU implementation for Broadband Processor Architecture + * We just establish a linear mapping at boot by setting all the + * IOPT cache entries in the CPU. + * The mapping functions should be identical to pci_direct_iommu, + * except for the handling of the high order bit that is required + * by the Spider bridge. These should be split into a separate + * file at the point where we get a different bridge chip. + * + * Copyright (C) 2005 IBM Deutschland Entwicklung GmbH, + * Arnd Bergmann + * + * Based on linear mapping + * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pci.h" +#include "bpa_iommu.h" + +static inline unsigned long +get_iopt_entry(unsigned long real_address, unsigned long ioid, + unsigned long prot) +{ + return (prot & IOPT_PROT_MASK) + | (IOPT_COHERENT) + | (IOPT_ORDER_VC) + | (real_address & IOPT_RPN_MASK) + | (ioid & IOPT_IOID_MASK); +} + +typedef struct { + unsigned long val; +} ioste; + +static inline ioste +mk_ioste(unsigned long val) +{ + ioste ioste = { .val = val, }; + return ioste; +} + +static inline ioste +get_iost_entry(unsigned long iopt_base, unsigned long io_address, unsigned page_size) +{ + unsigned long ps; + unsigned long iostep; + unsigned long nnpt; + unsigned long shift; + + switch (page_size) { + case 0x1000000: + ps = IOST_PS_16M; + nnpt = 0; /* one page per segment */ + shift = 5; /* segment has 16 iopt entries */ + break; + + case 0x100000: + ps = IOST_PS_1M; + nnpt = 0; /* one page per segment */ + shift = 1; /* segment has 256 iopt entries */ + break; + + case 0x10000: + ps = IOST_PS_64K; + nnpt = 0x07; /* 8 pages per io page table */ + shift = 0; /* all entries are used */ + break; + + case 0x1000: + ps = IOST_PS_4K; + nnpt = 0x7f; /* 128 pages per io page table */ + shift = 0; /* all entries are used */ + break; + + default: /* not a known compile time constant */ + BUILD_BUG_ON(1); + break; + } + + iostep = iopt_base + + /* need 8 bytes per iopte */ + (((io_address / page_size * 8) + /* align io page tables on 4k page boundaries */ + << shift) + /* nnpt+1 pages go into each iopt */ + & ~(nnpt << 12)); + + nnpt++; /* this seems to work, but the documentation is not clear + about wether we put nnpt or nnpt-1 into the ioste bits. + In theory, this can't work for 4k pages. */ + return mk_ioste(IOST_VALID_MASK + | (iostep & IOST_PT_BASE_MASK) + | ((nnpt << 5) & IOST_NNPT_MASK) + | (ps & IOST_PS_MASK)); +} + +/* compute the address of an io pte */ +static inline unsigned long +get_ioptep(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopt_base; + unsigned long page_size; + unsigned long page_number; + unsigned long iopt_offset; + + iopt_base = iost_entry.val & IOST_PT_BASE_MASK; + page_size = iost_entry.val & IOST_PS_MASK; + + /* decode page size to compute page number */ + page_number = (io_address & 0x0fffffff) >> (10 + 2 * page_size); + /* page number is an offset into the io page table */ + iopt_offset = (page_number << 3) & 0x7fff8ul; + return iopt_base + iopt_offset; +} + +/* compute the tag field of the iopt cache entry */ +static inline unsigned long +get_ioc_tag(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopte = get_ioptep(iost_entry, io_address); + + return IOPT_VALID_MASK + | ((iopte & 0x00000000000000ff8ul) >> 3) + | ((iopte & 0x0000003fffffc0000ul) >> 9); +} + +/* compute the hashed 6 bit index for the 4-way associative pte cache */ +static inline unsigned long +get_ioc_hash(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopte = get_ioptep(iost_entry, io_address); + + return ((iopte & 0x000000000000001f8ul) >> 3) + ^ ((iopte & 0x00000000000020000ul) >> 17) + ^ ((iopte & 0x00000000000010000ul) >> 15) + ^ ((iopte & 0x00000000000008000ul) >> 13) + ^ ((iopte & 0x00000000000004000ul) >> 11) + ^ ((iopte & 0x00000000000002000ul) >> 9) + ^ ((iopte & 0x00000000000001000ul) >> 7); +} + +/* same as above, but pretend that we have a simpler 1-way associative + pte cache with an 8 bit index */ +static inline unsigned long +get_ioc_hash_1way(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopte = get_ioptep(iost_entry, io_address); + + return ((iopte & 0x000000000000001f8ul) >> 3) + ^ ((iopte & 0x00000000000020000ul) >> 17) + ^ ((iopte & 0x00000000000010000ul) >> 15) + ^ ((iopte & 0x00000000000008000ul) >> 13) + ^ ((iopte & 0x00000000000004000ul) >> 11) + ^ ((iopte & 0x00000000000002000ul) >> 9) + ^ ((iopte & 0x00000000000001000ul) >> 7) + ^ ((iopte & 0x0000000000000c000ul) >> 8); +} + +static inline ioste +get_iost_cache(void __iomem *base, unsigned long index) +{ + unsigned long __iomem *p = (base + IOC_ST_CACHE_DIR); + return mk_ioste(in_be64(&p[index])); +} + +static inline void +set_iost_cache(void __iomem *base, unsigned long index, ioste ste) +{ + unsigned long __iomem *p = (base + IOC_ST_CACHE_DIR); + pr_debug("ioste %02lx was %016lx, store %016lx", index, + get_iost_cache(base, index).val, ste.val); + out_be64(&p[index], ste.val); + pr_debug(" now %016lx\n", get_iost_cache(base, index).val); +} + +static inline unsigned long +get_iopt_cache(void __iomem *base, unsigned long index, unsigned long *tag) +{ + unsigned long __iomem *tags = (void *)(base + IOC_PT_CACHE_DIR); + unsigned long __iomem *p = (void *)(base + IOC_PT_CACHE_REG); + + *tag = tags[index]; + rmb(); + return *p; +} + +static inline void +set_iopt_cache(void __iomem *base, unsigned long index, + unsigned long tag, unsigned long val) +{ + unsigned long __iomem *tags = base + IOC_PT_CACHE_DIR; + unsigned long __iomem *p = base + IOC_PT_CACHE_REG; + pr_debug("iopt %02lx was v%016lx/t%016lx, store v%016lx/t%016lx\n", + index, get_iopt_cache(base, index, &oldtag), oldtag, val, tag); + + out_be64(p, val); + out_be64(&tags[index], tag); +} + +static inline void +set_iost_origin(void __iomem *base) +{ + unsigned long __iomem *p = base + IOC_ST_ORIGIN; + unsigned long origin = IOSTO_ENABLE | IOSTO_SW; + + pr_debug("iost_origin %016lx, now %016lx\n", in_be64(p), origin); + out_be64(p, origin); +} + +static inline void +set_iocmd_config(void __iomem *base) +{ + unsigned long __iomem *p = base + 0xc00; + unsigned long conf; + + conf = in_be64(p); + pr_debug("iost_conf %016lx, now %016lx\n", conf, conf | IOCMD_CONF_TE); + out_be64(p, conf | IOCMD_CONF_TE); +} + +/* FIXME: get these from the device tree */ +#define ioc_base 0x20000511000ull +#define ioc_mmio_base 0x20000510000ull +#define ioid 0x48a +#define iopt_phys_offset (- 0x20000000) /* We have a 512MB offset from the SB */ +#define io_page_size 0x1000000 + +static unsigned long map_iopt_entry(unsigned long address) +{ + switch (address >> 20) { + case 0x600: + address = 0x24020000000ull; /* spider i/o */ + break; + default: + address += iopt_phys_offset; + break; + } + + return get_iopt_entry(address, ioid, IOPT_PROT_RW); +} + +static void iommu_bus_setup_null(struct pci_bus *b) { } +static void iommu_dev_setup_null(struct pci_dev *d) { } + +/* initialize the iommu to support a simple linear mapping + * for each DMA window used by any device. For now, we + * happen to know that there is only one DMA window in use, + * starting at iopt_phys_offset. */ +static void bpa_map_iommu(void) +{ + unsigned long address; + void __iomem *base; + ioste ioste; + unsigned long index; + + base = __ioremap(ioc_base, 0x1000, _PAGE_NO_CACHE); + pr_debug("%lx mapped to %p\n", ioc_base, base); + set_iocmd_config(base); + iounmap(base); + + base = __ioremap(ioc_mmio_base, 0x1000, _PAGE_NO_CACHE); + pr_debug("%lx mapped to %p\n", ioc_mmio_base, base); + + set_iost_origin(base); + + for (address = 0; address < 0x100000000ul; address += io_page_size) { + ioste = get_iost_entry(0x10000000000ul, address, io_page_size); + if ((address & 0xfffffff) == 0) /* segment start */ + set_iost_cache(base, address >> 28, ioste); + index = get_ioc_hash_1way(ioste, address); + pr_debug("addr %08lx, index %02lx, ioste %016lx\n", + address, index, ioste.val); + set_iopt_cache(base, + get_ioc_hash_1way(ioste, address), + get_ioc_tag(ioste, address), + map_iopt_entry(address)); + } + iounmap(base); +} + + +static void *bpa_alloc_coherent(struct device *hwdev, size_t size, + dma_addr_t *dma_handle, unsigned int __nocast flag) +{ + void *ret; + + ret = (void *)__get_free_pages(flag, get_order(size)); + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_abs(ret) | BPA_DMA_VALID; + } + return ret; +} + +static void bpa_free_coherent(struct device *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + free_pages((unsigned long)vaddr, get_order(size)); +} + +static dma_addr_t bpa_map_single(struct device *hwdev, void *ptr, + size_t size, enum dma_data_direction direction) +{ + return virt_to_abs(ptr) | BPA_DMA_VALID; +} + +static void bpa_unmap_single(struct device *hwdev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) +{ +} + +static int bpa_map_sg(struct device *hwdev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + int i; + + for (i = 0; i < nents; i++, sg++) { + sg->dma_address = (page_to_phys(sg->page) + sg->offset) + | BPA_DMA_VALID; + sg->dma_length = sg->length; + } + + return nents; +} + +static void bpa_unmap_sg(struct device *hwdev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ +} + +static int bpa_dma_supported(struct device *dev, u64 mask) +{ + return mask < 0x100000000ull; +} + +void bpa_init_iommu(void) +{ + bpa_map_iommu(); + + /* Direct I/O, IOMMU off */ + ppc_md.iommu_dev_setup = iommu_dev_setup_null; + ppc_md.iommu_bus_setup = iommu_bus_setup_null; + + pci_dma_ops.alloc_coherent = bpa_alloc_coherent; + pci_dma_ops.free_coherent = bpa_free_coherent; + pci_dma_ops.map_single = bpa_map_single; + pci_dma_ops.unmap_single = bpa_unmap_single; + pci_dma_ops.map_sg = bpa_map_sg; + pci_dma_ops.unmap_sg = bpa_unmap_sg; + pci_dma_ops.dma_supported = bpa_dma_supported; +} diff --git a/arch/ppc64/kernel/bpa_iommu.h b/arch/ppc64/kernel/bpa_iommu.h new file mode 100644 index 0000000000000..e547d77dfa048 --- /dev/null +++ b/arch/ppc64/kernel/bpa_iommu.h @@ -0,0 +1,65 @@ +#ifndef BPA_IOMMU_H +#define BPA_IOMMU_H + +/* some constants */ +enum { + /* segment table entries */ + IOST_VALID_MASK = 0x8000000000000000ul, + IOST_TAG_MASK = 0x3000000000000000ul, + IOST_PT_BASE_MASK = 0x000003fffffff000ul, + IOST_NNPT_MASK = 0x0000000000000fe0ul, + IOST_PS_MASK = 0x000000000000000ful, + + IOST_PS_4K = 0x1, + IOST_PS_64K = 0x3, + IOST_PS_1M = 0x5, + IOST_PS_16M = 0x7, + + /* iopt tag register */ + IOPT_VALID_MASK = 0x0000000200000000ul, + IOPT_TAG_MASK = 0x00000001fffffffful, + + /* iopt cache register */ + IOPT_PROT_MASK = 0xc000000000000000ul, + IOPT_PROT_NONE = 0x0000000000000000ul, + IOPT_PROT_READ = 0x4000000000000000ul, + IOPT_PROT_WRITE = 0x8000000000000000ul, + IOPT_PROT_RW = 0xc000000000000000ul, + IOPT_COHERENT = 0x2000000000000000ul, + + IOPT_ORDER_MASK = 0x1800000000000000ul, + /* order access to same IOID/VC on same address */ + IOPT_ORDER_ADDR = 0x0800000000000000ul, + /* similar, but only after a write access */ + IOPT_ORDER_WRITES = 0x1000000000000000ul, + /* Order all accesses to same IOID/VC */ + IOPT_ORDER_VC = 0x1800000000000000ul, + + IOPT_RPN_MASK = 0x000003fffffff000ul, + IOPT_HINT_MASK = 0x0000000000000800ul, + IOPT_IOID_MASK = 0x00000000000007fful, + + IOSTO_ENABLE = 0x8000000000000000ul, + IOSTO_ORIGIN = 0x000003fffffff000ul, + IOSTO_HW = 0x0000000000000800ul, + IOSTO_SW = 0x0000000000000400ul, + + IOCMD_CONF_TE = 0x0000800000000000ul, + + /* memory mapped registers */ + IOC_PT_CACHE_DIR = 0x000, + IOC_ST_CACHE_DIR = 0x800, + IOC_PT_CACHE_REG = 0x910, + IOC_ST_ORIGIN = 0x918, + IOC_CONF = 0x930, + + /* The high bit needs to be set on every DMA address, + only 2GB are addressable */ + BPA_DMA_VALID = 0x80000000, + BPA_DMA_MASK = 0x7fffffff, +}; + + +void bpa_init_iommu(void); + +#endif diff --git a/arch/ppc64/kernel/bpa_setup.c b/arch/ppc64/kernel/bpa_setup.c index 0a43d8a93d765..57b3db66f4580 100644 --- a/arch/ppc64/kernel/bpa_setup.c +++ b/arch/ppc64/kernel/bpa_setup.c @@ -46,6 +46,7 @@ #include "pci.h" #include "bpa_iic.h" +#include "bpa_iommu.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -107,7 +108,7 @@ static void __init bpa_init_early(void) hpte_init_native(); - pci_direct_iommu_init(); + bpa_init_iommu(); ppc64_interrupt_controller = IC_BPA_IIC; -- cgit 1.2.3-korg From 8f586b2243198194240626fd9695da5564ffa7ee Mon Sep 17 00:00:00 2001 From: Mike Strosaker Date: Thu, 23 Jun 2005 16:09:41 +1000 Subject: [PATCH] correct printing to operator panel This patch corrects the printing of progress indicators to the op panel on p/iSeries ppc64 systems. Each discrete reference code should begin with a form feed char to clear the op panel, and the first and second lines should be separated with a CR/LF sequence. Padding with spaces is not necessary. Also, capitalize the hex value printed on the first line, to be consistent with the values printed by firmware, service processor, etc. It turns out that there's an ibm,form-feed property; this patch uses it in the pSeries-specific progress routine. This patch also checks the number of rows and the specific width of each row (the second row on power5 systems can actually hold 80 characters). If the displayed text is too wide for the physical display, it can be viewed in the ASM menus, or by selecting option 14 on the op panel. Signed-off-by: Mike Strosaker Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/rtas.c | 59 +++++++++++++++++++++++++++++------------------ arch/ppc64/kernel/setup.c | 6 ++--- 2 files changed, 40 insertions(+), 25 deletions(-) diff --git a/arch/ppc64/kernel/rtas.c b/arch/ppc64/kernel/rtas.c index 43e1518653d55..5e8eb33b8e540 100644 --- a/arch/ppc64/kernel/rtas.c +++ b/arch/ppc64/kernel/rtas.c @@ -98,21 +98,29 @@ rtas_progress(char *s, unsigned short hex) int width, *p; char *os; static int display_character, set_indicator; - static int max_width; + static int display_width, display_lines, *row_width, form_feed; static DEFINE_SPINLOCK(progress_lock); + static int current_line; static int pending_newline = 0; /* did last write end with unprinted newline? */ if (!rtas.base) return; - if (max_width == 0) { - if ((root = find_path_device("/rtas")) && - (p = (unsigned int *)get_property(root, - "ibm,display-line-length", - NULL))) - max_width = *p; - else - max_width = 0x10; + if (display_width == 0) { + display_width = 0x10; + if ((root = find_path_device("/rtas"))) { + if ((p = (unsigned int *)get_property(root, + "ibm,display-line-length", NULL))) + display_width = *p; + if ((p = (unsigned int *)get_property(root, + "ibm,form-feed", NULL))) + form_feed = *p; + if ((p = (unsigned int *)get_property(root, + "ibm,display-number-of-lines", NULL))) + display_lines = *p; + row_width = (unsigned int *)get_property(root, + "ibm,display-truncation-length", NULL); + } display_character = rtas_token("display-character"); set_indicator = rtas_token("set-indicator"); } @@ -131,31 +139,39 @@ rtas_progress(char *s, unsigned short hex) * it would just clear the bottom line of output. Print it now * instead. * - * If no newline is pending, print a CR to start output at the - * beginning of the line. + * If no newline is pending and form feed is supported, clear the + * display with a form feed; otherwise, print a CR to start output + * at the beginning of the line. */ if (pending_newline) { rtas_call(display_character, 1, 1, NULL, '\r'); rtas_call(display_character, 1, 1, NULL, '\n'); pending_newline = 0; } else { - rtas_call(display_character, 1, 1, NULL, '\r'); + current_line = 0; + if (form_feed) + rtas_call(display_character, 1, 1, NULL, + (char)form_feed); + else + rtas_call(display_character, 1, 1, NULL, '\r'); } - width = max_width; + if (row_width) + width = row_width[current_line]; + else + width = display_width; os = s; while (*os) { if (*os == '\n' || *os == '\r') { - /* Blank to end of line. */ - while (width-- > 0) - rtas_call(display_character, 1, 1, NULL, ' '); - /* If newline is the last character, save it * until next call to avoid bumping up the * display output. */ if (*os == '\n' && !os[1]) { pending_newline = 1; + current_line++; + if (current_line > display_lines-1) + current_line = display_lines-1; spin_unlock(&progress_lock); return; } @@ -172,7 +188,10 @@ rtas_progress(char *s, unsigned short hex) rtas_call(display_character, 1, 1, NULL, *os); } - width = max_width; + if (row_width) + width = row_width[current_line]; + else + width = display_width; } else { width--; rtas_call(display_character, 1, 1, NULL, *os); @@ -186,10 +205,6 @@ rtas_progress(char *s, unsigned short hex) os++; } - /* Blank to end of line. */ - while (width-- > 0) - rtas_call(display_character, 1, 1, NULL, ' '); - spin_unlock(&progress_lock); } diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 10222008fe20a..8a1ca695f8a7c 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -1080,11 +1080,11 @@ void __init setup_arch(char **cmdline_p) static void ppc64_do_msg(unsigned int src, const char *msg) { if (ppc_md.progress) { - char buf[32]; + char buf[128]; - sprintf(buf, "%08x \n", src); + sprintf(buf, "%08X\n", src); ppc_md.progress(buf, 0); - sprintf(buf, "%-16s", msg); + snprintf(buf, 128, "%s", msg); ppc_md.progress(buf, 0); } } -- cgit 1.2.3-korg From dad32bbf43b496bcd32a83f73a1e7fd0a02cfd3e Mon Sep 17 00:00:00 2001 From: John Rose Date: Thu, 23 Jun 2005 17:09:54 +1000 Subject: [PATCH] pSeries - read irqs dynamically For I/O DLPAR to work properly, the kernel needs to allow for dynamic assignment of the irq field of the pci_dev structure upon dynamic bus addition. This patch moves the assignment of that field from pSeries_final_fixup() to pcibios_fixup_bus(), which enables dynamic assignment for the children of a newly added bus. Currently, pci_devs receive their irq numbers in one of two ways. The irq line is either read at boot for all pci_devs, or read by the rpaphp module at slot enable time. The latter is no longer sufficient for DLPAR addition of slots that don't qualify as PCI-hotplug capable. This solution handles the cases of boot and dynamic add. Signed-off-by: John Rose Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/pSeries_pci.c | 35 ++++++++++++++++++++--------------- arch/ppc64/kernel/pSeries_setup.c | 3 +-- arch/ppc64/kernel/pci.c | 3 +++ arch/ppc64/kernel/pci.h | 6 +++++- include/asm-ppc64/machdep.h | 1 + 5 files changed, 30 insertions(+), 18 deletions(-) diff --git a/arch/ppc64/kernel/pSeries_pci.c b/arch/ppc64/kernel/pSeries_pci.c index dfa6d3d3e9f0e..1f5f141fb7a18 100644 --- a/arch/ppc64/kernel/pSeries_pci.c +++ b/arch/ppc64/kernel/pSeries_pci.c @@ -32,7 +32,7 @@ #include "pci.h" -static int __initdata s7a_workaround; +static int __initdata s7a_workaround = -1; #if 0 void pcibios_name_device(struct pci_dev *dev) @@ -65,6 +65,7 @@ static void __init check_s7a(void) struct device_node *root; char *model; + s7a_workaround = 0; root = of_find_node_by_path("/"); if (root) { model = get_property(root, "model", NULL); @@ -74,6 +75,24 @@ static void __init check_s7a(void) } } +void __devinit pSeries_irq_bus_setup(struct pci_bus *bus) +{ + struct pci_dev *dev; + + if (s7a_workaround < 0) + check_s7a(); + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_read_irq_line(dev); + if (s7a_workaround) { + if (dev->irq > 16) { + dev->irq -= 3; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + dev->irq); + } + } + } +} + static void __init pSeries_request_regions(void) { if (!isa_io_base) @@ -89,20 +108,6 @@ static void __init pSeries_request_regions(void) void __init pSeries_final_fixup(void) { - struct pci_dev *dev = NULL; - - check_s7a(); - - for_each_pci_dev(dev) { - pci_read_irq_line(dev); - if (s7a_workaround) { - if (dev->irq > 16) { - dev->irq -= 3; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } - } - } - phbs_remap_io(); pSeries_request_regions(); diff --git a/arch/ppc64/kernel/pSeries_setup.c b/arch/ppc64/kernel/pSeries_setup.c index 41e6de2c91587..f2b41243342c4 100644 --- a/arch/ppc64/kernel/pSeries_setup.c +++ b/arch/ppc64/kernel/pSeries_setup.c @@ -71,8 +71,6 @@ #define DBG(fmt...) #endif -extern void pSeries_final_fixup(void); - extern void find_udbg_vterm(void); extern void system_reset_fwnmi(void); /* from head.S */ extern void machine_check_fwnmi(void); /* from head.S */ @@ -425,6 +423,7 @@ struct machdep_calls __initdata pSeries_md = { .get_cpuinfo = pSeries_get_cpuinfo, .log_error = pSeries_log_error, .pcibios_fixup = pSeries_final_fixup, + .irq_bus_setup = pSeries_irq_bus_setup, .restart = rtas_restart, .power_off = rtas_power_off, .halt = rtas_halt, diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index 2bf0513f3eca0..580676f87d23a 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -902,6 +902,9 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) ppc_md.iommu_dev_setup(dev); + if (ppc_md.irq_bus_setup) + ppc_md.irq_bus_setup(bus); + if (!pci_probe_only) return; diff --git a/arch/ppc64/kernel/pci.h b/arch/ppc64/kernel/pci.h index 0fd7d849aa77e..26be78b13af19 100644 --- a/arch/ppc64/kernel/pci.h +++ b/arch/ppc64/kernel/pci.h @@ -40,10 +40,14 @@ struct device_node *fetch_dev_dn(struct pci_dev *dev); void pci_addr_cache_insert_device(struct pci_dev *dev); void pci_addr_cache_remove_device(struct pci_dev *dev); -/* From pSeries_pci.h */ +/* From rtas_pci.h */ void init_pci_config_tokens (void); unsigned long get_phb_buid (struct device_node *); +/* From pSeries_pci.h */ +extern void pSeries_final_fixup(void); +extern void pSeries_irq_bus_setup(struct pci_bus *bus); + extern unsigned long pci_probe_only; extern unsigned long pci_assign_all_buses; extern int pci_read_irq_line(struct pci_dev *pci_dev); diff --git a/include/asm-ppc64/machdep.h b/include/asm-ppc64/machdep.h index 5d3cd9d042e29..553b2ea23bedf 100644 --- a/include/asm-ppc64/machdep.h +++ b/include/asm-ppc64/machdep.h @@ -76,6 +76,7 @@ struct machdep_calls { void (*tce_flush)(struct iommu_table *tbl); void (*iommu_dev_setup)(struct pci_dev *dev); void (*iommu_bus_setup)(struct pci_bus *bus); + void (*irq_bus_setup)(struct pci_bus *bus); int (*probe)(int platform); void (*setup_arch)(void); -- cgit 1.2.3-korg From d7152fe14cad075d6dd4ee4194acd131aed0244e Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 23 Jun 2005 17:14:39 +1000 Subject: [PATCH] Maple powerdown patch Currently reset and powerdown are not implemented on the Maple board, and attempting to do so will (incorrectly return). This implements the proper communication with the service processor, allowing correct reset and powerdown on the Maple board, by communicating with the service processor. If somehow it's unable to communicate with the service processor it will loop forever instead. Note that powerdown on the Maple will power down the CPUs, but not the fans or other board components due to hardware and firmware limitations. Signed-off-by: David Gibson Signed-off-by: Frank Rowand Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/maple_setup.c | 62 ++++++++++++++++++++++++++++++++++++++++- arch/ppc64/kernel/setup.c | 18 ++++++++++++ 2 files changed, 79 insertions(+), 1 deletion(-) diff --git a/arch/ppc64/kernel/maple_setup.c b/arch/ppc64/kernel/maple_setup.c index 3dabedb8553b5..da8900b51f40a 100644 --- a/arch/ppc64/kernel/maple_setup.c +++ b/arch/ppc64/kernel/maple_setup.c @@ -78,17 +78,77 @@ extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel); extern void generic_find_legacy_serial_ports(u64 *physport, unsigned int *default_speed); - static void maple_restart(char *cmd) { + unsigned int maple_nvram_base; + unsigned int maple_nvram_offset; + unsigned int maple_nvram_command; + struct device_node *rtcs; + + /* find NVRAM device */ + rtcs = find_compatible_devices("nvram", "AMD8111"); + if (rtcs && rtcs->addrs) { + maple_nvram_base = rtcs->addrs[0].address; + } else { + printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); + printk(KERN_EMERG "Maple: Manual Restart Required\n"); + return; + } + + /* find service processor device */ + rtcs = find_devices("service-processor"); + if (!rtcs) { + printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); + printk(KERN_EMERG "Maple: Manual Restart Required\n"); + return; + } + maple_nvram_offset = *(unsigned int*) get_property(rtcs, + "restart-addr", NULL); + maple_nvram_command = *(unsigned int*) get_property(rtcs, + "restart-value", NULL); + + /* send command */ + outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset); + for (;;) ; } static void maple_power_off(void) { + unsigned int maple_nvram_base; + unsigned int maple_nvram_offset; + unsigned int maple_nvram_command; + struct device_node *rtcs; + + /* find NVRAM device */ + rtcs = find_compatible_devices("nvram", "AMD8111"); + if (rtcs && rtcs->addrs) { + maple_nvram_base = rtcs->addrs[0].address; + } else { + printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); + printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); + return; + } + + /* find service processor device */ + rtcs = find_devices("service-processor"); + if (!rtcs) { + printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); + printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); + return; + } + maple_nvram_offset = *(unsigned int*) get_property(rtcs, + "power-off-addr", NULL); + maple_nvram_command = *(unsigned int*) get_property(rtcs, + "power-off-value", NULL); + + /* send command */ + outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset); + for (;;) ; } static void maple_halt(void) { + maple_power_off(); } #ifdef CONFIG_SMP diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 8a1ca695f8a7c..7d060ddb5e931 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -683,6 +683,12 @@ void machine_restart(char *cmd) if (ppc_md.nvram_sync) ppc_md.nvram_sync(); ppc_md.restart(cmd); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; } EXPORT_SYMBOL(machine_restart); @@ -692,6 +698,12 @@ void machine_power_off(void) if (ppc_md.nvram_sync) ppc_md.nvram_sync(); ppc_md.power_off(); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; } EXPORT_SYMBOL(machine_power_off); @@ -701,6 +713,12 @@ void machine_halt(void) if (ppc_md.nvram_sync) ppc_md.nvram_sync(); ppc_md.halt(); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; } EXPORT_SYMBOL(machine_halt); -- cgit 1.2.3-korg