| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
|
|
Peter Griffin <peter.griffin@linaro.org> says:
Hi Martin, James & Alim,
This series adds support to the ufs-exynos driver for Tensor gs101
found in Pixel 6. It was send previously in [1] and [2] but included
the other clock, phy and DTS parts. This series has been split into
just the ufs-exynos part to hopefully make things easier.
With this series, plus the phy, clock and dts changes UFS is
functional upstream for Pixel 6. The SKhynix HN8T05BZGKX015 can be
enumerated, partitions mounted etc.
The series is split into some prepatory patches for ufs-exynos and a
final patch that adds the gs101 support.
Note the sysreg clock has been moved to ufs node as fine grained clock
control around the syscon sysreg register accesses doesn't result in
functional UFS.
regards,
Peter
Link: https://lore.kernel.org/r/20240426122004.2249178-1-peter.griffin@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a dedicated compatible and drv_data with associated hooks for gs101 SoC
found on Pixel 6.
Note we make use of the previously added EXYNOS_UFS_OPT_UFSPR_SECURE
option, to skip initialisation of UFSPR registers as these are only
accessible via SMC call.
EXYNOS_UFS_OPT_TIMER_TICK_SELECT option is also set to select tick
source. This has been done so as not to effect any existing platforms.
DBG_OPTION_SUITE on gs101 has different address offsets to other SoCs so
these register offsets now come from uic_attr struct.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-7-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This allows these registers to be at different offsets or not exist at all
on some SoCs variants.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-6-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Platforms such as Tensor gs101 the pclk frequency is 267Mhz. Increase
PCLK_AVAIL_MAX so we don't fail the frequency check.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-5-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This option is intended to be set for SoCs that have HCI_V2P1_CTRL register
and can select their tick source via IA_TICK_SEL bit.
Source clock selection for timer tick
0x0 = Bus clock (aclk)
0x1 = Function clock (mclk)
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-4-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This option is intended to be set on platforms whose ufspr registers are
only accessible via smc call (such as gs101).
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-3-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the calculation of the utrd pointer. This patch addresses the following
Coverity complaint:
CID 1538170: (#1 of 1): Extra sizeof expression (SIZEOF_MISMATCH)
suspicious_pointer_arithmetic: Adding sq_head_slot * 32UL /* sizeof (struct
utp_transfer_req_desc) */ to pointer hwq->sqe_base_addr of type struct
utp_transfer_req_desc * is suspicious because adding an integral value to
this pointer automatically scales that value by the size, 32 bytes, of the
pointed-to type, struct utp_transfer_req_desc. Most likely, the
multiplication by sizeof (struct utp_transfer_req_desc) in this expression
is extraneous and should be eliminated.
Cc: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <quic_cang@quicinc.com>
Fixes: 8d7290348992 ("scsi: ufs: mcq: Add supporting functions for MCQ abort")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240410000751.1047758-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Christoph Hellwig <hch@lst.de> says:
Hi all,
this series converts the SCSI midlayer and LLDDs to use atomic queue
limits API. It is pretty straight forward, except for the mpt3mr
driver which does really weird and probably already broken things by
setting limits from unlocked device iteration callbacks.
I will probably defer the (more complicated) ULD changes to the next
merge window as they would heavily conflict with Damien's zone write
plugging series. With that the series could go in through the SCSI
tree if Jens' ACKs the core block layer bits.
Link: https://lore.kernel.org/r/20240409143748.980206-1-hch@lst.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add MODULE_DEVICE_TABLE() so the module can be properly autoloaded based on
the alias from of_device_id table.
Cc: Will McVicker <willmcvicker@google.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240409203954.80484-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Export the module alias information using the MODULE_DEVICE_TABLE() macro
in order to support auto-loading this module for devices that support it.
$ modinfo -F alias out/linux/drivers/ufs/host/ufs-exynos.ko
of:N*T*Ctesla,fsd-ufsC*
of:N*T*Ctesla,fsd-ufs
of:N*T*Csamsung,exynosautov9-ufs-vhC*
of:N*T*Csamsung,exynosautov9-ufs-vh
of:N*T*Csamsung,exynosautov9-ufsC*
of:N*T*Csamsung,exynosautov9-ufs
of:N*T*Csamsung,exynos7-ufsC*
of:N*T*Csamsung,exynos7-ufs
Signed-off-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20240409202203.1308163-1-willmcvicker@google.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_cmd_inflight() is used to check whether or not a command is in
progress. Make it skip commands that have already completed by changing
the !blk_mq_request_started(rq) check into blk_mq_rq_state(rq) !=
MQ_RQ_IN_FLIGHT. We cannot rely on lrbp->cmd since lrbp->cmd is not
cleared when a command completes.
Link: https://lore.kernel.org/linux-scsi/20230517223157.1068210-3-bvanassche@acm.org/
Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
Link: https://lore.kernel.org/r/20240411071444.51873-1-hy50.seo@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS spec version 2.1 was published more than 10 years ago. It is
vanishingly unlikely that even there are out there platforms that uses
earlier host controllers, let alone that those ancient platforms will ever
run a V6.10 kernel. To be extra cautious, leave out removal of UFSHCI 2.0
support from this patch, and just remove support of host controllers prior
to UFS2.0.
This patch removes some legacy tuning calls that no longer apply.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240410183720.908-2-avri.altman@wdc.com
Acked-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the SCSI host's dma_alignment field and set it in ->init and remove the
now unused config_scsi_dev method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-9-hch@lst.de
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This allows bsg_setup_queue() to pass them to blk_mq_alloc_queue() and thus
set up the limits at queue allocation time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-3-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let's add the checks to warn the user if the ICC scaling is not supported
for the gear/lane values and also fallback to the max value if that's the
case.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240403-ufs-icc-fix-v2-2-958412a5eb45@linaro.org
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
These entries are necessary to scale the interconnect bandwidth while
operating in Gear 5.
Cc: Amit Pundir <amit.pundir@linaro.org>
Fixes: 03ce80a1bb86 ("scsi: ufs: qcom: Add support for scaling interconnects")
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240403-ufs-icc-fix-v2-1-958412a5eb45@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Andrew Halaney <ahalaney@redhat.com> says:
Please review with care as I'm not all that confident in this subject.
UFS has a lot of mb() variants used, most with comments saying "ensure
this takes effect before continuing". mb()'s aren't really the way to
guarantee that, a read back is the best method.
Some of these though I think could go a step further and remove the
mb() variant without a read back. As far as I can tell there's no real
reason to ensure it takes effect in most cases (there's no delay() or
anything afterwards, and eventually another readl()/writel() happens
which is by definition ordered). Some of the patches in this series do
that if I was confident it was safe (or a reviewer pointed out prior
that they thought it was safe to do so).
Thanks in advance for the help,
Andrew
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-0-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently a wmb() is used to ensure that writes to the
UTP_TASK_REQ_LIST_BASE* regs are completed prior to following writes to
the run/stop registers.
wmb() ensures that the write completes, but completion doesn't mean that
it isn't stored in a buffer somewhere. The recommendation for
ensuring the bits have taken effect on the device is to perform a read
back to force it to make it all the way to the device. This is
documented in device-io.rst and a talk by Will Deacon on this can
be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, none of that is necessary here. All of the writel()/readl()'s here
are to the same endpoint, so they will be ordered. There's no subsequent
delay() etc that requires it to have taken effect already, so no
readback is necessary here.
For that reason just drop the wmb() altogether.
Fixes: 897efe628d7e ("scsi: ufs: add missing memory barriers")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-11-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the doorbell is written to and a wmb() is used to commit it
immediately.
wmb() ensures that the write completes before following writes occur, but
completion doesn't mean that it isn't stored in a buffer somewhere. The
recommendation for ensuring this bit has taken effect on the device is to
perform a read back to force it to make it all the way to the device. This
is documented in device-io.rst and a talk by Will Deacon on this can be
seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, completion and taking effect aren't necessary to guarantee here.
There's already other examples of the doorbell being rung that don't do
this. The writel() of the doorbell guarantees prior writes by this thread
(to the request being setup for example) complete prior to the ringing of
the doorbell, and the following wait_for_completion_io_timeout() doesn't
require any special memory barriers either.
With that in mind, just remove the wmb() altogether here.
Fixes: ad1a1b9cd67a ("scsi: ufs: commit descriptors before setting the doorbell")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-10-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the UIC_COMMAND_COMPL interrupt is disabled and a wmb() is used
to complete the register write before any following writes.
wmb() ensures the writes complete in that order, but completion doesn't
mean that it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read back
to force it to make it all the way to the device. This is documented in
device-io.rst and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the wmb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d75f7fe495cf ("scsi: ufs: reduce the interrupts for power mode change requests")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-9-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, interrupts are cleared and disabled prior to registering the
interrupt. An mb() is used to complete the clear/disable writes before the
interrupt is registered.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring these
bits have taken effect on the device is to perform a read back to force it
to make it all the way to the device. This is documented in device-io.rst
and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure these bits hit the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: 199ef13cac7d ("scsi: ufs: avoid spurious UFS host controller interrupts")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-8-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the UTP_TASK_REQ_LIST_BASE_L/UTP_TASK_REQ_LIST_BASE_H regs are
written to and then completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring these
bits have taken effect on the device is to perform a read back to force it
to make it all the way to the device. This is documented in device-io.rst
and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bits hit the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: 88441a8d355d ("scsi: ufs: core: Add hibernation callbacks")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-7-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, HCLKDIV is written to and then completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d90996dae8e4 ("scsi: ufs: Add UFS platform driver for Cadence UFS")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-6-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the CGC enable bit is written and then an mb() is used to ensure
that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-5-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the QUNIPRO_SEL bit is written to and then an mb() is used to
ensure that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, there's really no reason to even ensure completion before
continuing. The only requirement here is that this write is ordered to this
endpoint (which readl()/writel() guarantees already). For that reason the
mb() can be dropped altogether without anything forcing completion.
Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-4-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the testbus configuration is written and completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, there's really no reason to even ensure completion before
continuing. The only requirement here is that this write is ordered to this
endpoint (which readl()/writel() guarantees already). For that reason the
mb() can be dropped altogether without anything forcing completion.
Fixes: 9c46b8676271 ("scsi: ufs-qcom: dump additional testbus registers")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-3-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure
that write has gone through to the device.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-2-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the reset bit for the UFS provided reset controller (used by its
phy) is written to, and then a mb() happens to try and ensure that hit the
device. Immediately afterwards a usleep_range() occurs.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. By doing so and
guaranteeing the ordering against the immediately following usleep_range(),
the mb() can safely be removed.
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-1-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Core in scsi_register_driver() already sets the .owner, so driver does not
need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240328-b4-module-owner-scsi-v1-6-c86cb4f6e91c@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a dev command times out in MCQ mode, a successfully cleared command
should cause a retry. However, because we currently return 0, the caller
considers the command a success which causes the following error to be
logged: "Invalid offset 0x0 in descriptor IDN 0x9, length 0x0".
Retry if clearing the command was successful.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240328111244.3599-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When wl suspend error occurs, for example BKOP or SSU timeout, the host
triggers an error handler and returns -EBUSY to break the wl suspend
process. However, it is possible for the runtime PM to enter wl suspend
again before the error handler has finished, and return -EINVAL because the
device is in an error state. To address this, ensure that the rumtime PM
waits for the error handler to finish, or trigger the error handler in such
cases, because returning -EINVAL can cause the I/O to hang.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240329015036.15707-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
MediaTek platforms"
Peter Wang <peter.wang@mediatek.com> says:
This series fixes some defects and provide features in MediaTek UFS
drivers.
Link: https://lore.kernel.org/r/20240315083448.7185-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add mtcmos control function and config.
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-8-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Reset mphy when resetting host. Backup mphy setting after mphy reset
control get. Restore mphy setting after mphy reset.
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-7-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Mediatek host power includes two parts:
1. ufshci power, which is the main power of ufs host controller.
2. ufshci crypto sram power, which is the power of ufs crypto engine.
The host power control is actually controlling crypto sram power. Rename
it.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240315083448.7185-6-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move sip command and associated define to a new sip header file.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-5-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add new mediatek host cap UFS_MTK_CAP_DISABLE_MCQ to allow disabling MCQ
feature by assigning dts boolean property "mediatek,ufs-disable-mcq".
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240315083448.7185-4-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix Mediatek TX skew issue by checking dts setting and vendor/model. Then
set PA_TACTIVATE to 8.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240315083448.7185-3-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
VSX (the upper layer of VCCQ/VCCQ2) should:
1. Always set to hpm mode if ufs device is active.
2. Enter lpm mode only if ufs device is not active.
VCCQX should:
1. Keep hpm mode if vccq and vccq2 not set in dts.
2. Keep hpm mode if vcc not set in dts keep vcc always on.
3. Keep hpm if broken vcc keep vcc always on and not allow vccq lpm.
4. Except upper case, can enter lpm mode if ufs device is not active.
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Avri Altman <avri.altman@wdc.com> says:
Device management commands are constructed for query commands that are
being issued by the driver, but also for raw device management
commands originated by the bsg module, and recently, by the advanced
rpmb handler. Thus, the same code fragments, e.g. locking, composing
the command, composing the upiu etc., appear over and over. Remove
those duplications. Theoretically, there should be no functional
change.
Link: https://lore.kernel.org/r/20240309081104.5006-1-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move some code fragments into ufshcd_prepare_req_desc_hdr() so it can be
used throughout.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-5-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move out some of the dev_cmd initializations so they can be used elsewhere.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-4-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move out the actual command issue from exec_dev_cmd it can be used
elsewhere. While at it, remove a redundant "lrbp->cmd = NULL" assignment.
Also, the device management commands that are originated from the
ufs-bsg code path, are being traced now, which wasn't the case before.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-3-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Group those 3 calls that repeat for every device management command into
lock and unlock handlers.
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-2-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in the outstanding updates from the 6.9/scsi-queue branch.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Only a couple of driver updates this time (lpfc and mpt3sas) plus the
usual assorted minor fixes and updates. The major core update is a set
of patches moving retries out of the drivers and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (84 commits)
scsi: core: Constify the struct device_type usage
scsi: libfc: replace deprecated strncpy() with memcpy()
scsi: lpfc: Replace deprecated strncpy() with strscpy()
scsi: bfa: Fix function pointer type mismatch for state machines
scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
scsi: bfa: Remove additional unnecessary struct declarations
scsi: csiostor: Avoid function pointer casts
scsi: qla1280: Remove redundant assignment to variable 'mr'
scsi: core: Make scsi_bus_type const
scsi: core: Really include kunit tests with SCSI_LIB_KUNIT_TEST
scsi: target: tcm_loop: Make tcm_loop_lld_bus const
scsi: scsi_debug: Make pseudo_lld_bus const
scsi: iscsi: Make iscsi_flashnode_bus const
scsi: fcoe: Make fcoe_bus_type const
scsi: lpfc: Copyright updates for 14.4.0.0 patches
scsi: lpfc: Update lpfc version to 14.4.0.0
scsi: lpfc: Change lpfc_vport load_flag member into a bitmask
scsi: lpfc: Change lpfc_vport fc_flag member into a bitmask
scsi: lpfc: Protect vport fc_nodes list with an explicit spin lock
scsi: lpfc: Change nlp state statistic counters into atomic_t
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
|
|
Pull block updates from Jens Axboe:
- MD pull requests via Song:
- Cleanup redundant checks (Yu Kuai)
- Remove deprecated headers (Marc Zyngier, Song Liu)
- Concurrency fixes (Li Lingfeng)
- Memory leak fix (Li Nan)
- Refactor raid1 read_balance (Yu Kuai, Paul Luse)
- Clean up and fix for md_ioctl (Li Nan)
- Other small fixes (Gui-Dong Han, Heming Zhao)
- MD atomic limits (Christoph)
- NVMe pull request via Keith:
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)
- Improvement and cleanup for cached request handling (Christoph)
- Moving towards atomic queue limits. Core changes and driver bits so
far (Christoph)
- Fix UAF issues in aoeblk (Chun-Yi)
- Zoned fix and cleanups (Damien)
- s390 dasd cleanups and fixes (Jan, Miroslav)
- Block issue timestamp caching (me)
- noio scope guarding for zoned IO (Johannes)
- block/nvme PI improvements (Kanchan)
- Ability to terminate long running discard loop (Keith)
- bdev revalidation fix (Li)
- Get rid of old nr_queues hack for kdump kernels (Ming)
- Support for async deletion of ublk (Ming)
- Improve IRQ bio recycling (Pavel)
- Factor in CPU capacity for remote vs local completion (Qais)
- Add shared_tags configfs entry for null_blk (Shin'ichiro
- Fix for a regression in page refcounts introduced by the folio
unification (Tony)
- Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid,
Ricardo, Roman, Tang, Uwe)
* tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits)
block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC
block/swim: Convert to platform remove callback returning void
cdrom: gdrom: Convert to platform remove callback returning void
block: remove disk_stack_limits
md: remove mddev->queue
md: don't initialize queue limits
md/raid10: use the atomic queue limit update APIs
md/raid5: use the atomic queue limit update APIs
md/raid1: use the atomic queue limit update APIs
md/raid0: use the atomic queue limit update APIs
md: add queue limit helpers
md: add a mddev_is_dm helper
md: add a mddev_add_trace_msg helper
md: add a mddev_trace_remap helper
bcache: move calculation of stripe_size and io_opt into bcache_device_init
virtio_blk: Do not use disk_set_max_open/active_zones()
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
block: move capacity validation to blkpg_do_ioctl()
block: prevent division by zero in blk_rq_stat_sum()
drbd: atomically update queue limits in drbd_reconsider_queue_parameters
...
|
|
The MSM8996 DT doesn't provide frequency limits for the core_clk_unipro
clock, which results in miscalculation of the cycles_in_1us value. Provide
the backwards-compatible default to support existing MSM8996 DT files.
Fixes: b4e13e1ae95e ("scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES")
Cc: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: stable@vger.kernel.org # 6.7.x
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240218-msm8996-fix-ufs-v3-1-40aab49899a3@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
As per JEDEC Standard No. 223E Section 5.9.2, the max # active commands
value programmed by the host sw in MCQConfig.MAC should be one less than
the actual value.
Signed-off-by: Rohit Ner <rohitner@google.com>
Link: https://lore.kernel.org/r/20240220095637.2900067-1-rohitner@google.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is one goto where "sched_clk_scaling_suspend_work" is true but
"scale_up" is uninitialized. It leads to a Smatch uninitialized variable
warning:
drivers/ufs/core/ufshcd.c:1589 ufshcd_devfreq_target() error: uninitialized symbol 'scale_up'.
Fixes: 1d969731b87f ("scsi: ufs: core: Only suspend clock scaling if scaling down")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/c787d37f-1107-4512-8991-bccf80e74a35@moroto.mountain
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Switch all the users of the platform MSI domain over to invoke the new
interfaces which branch to the original platform MSI functions when the
irqdomain associated to the caller device does not yet provide MSI parent
functionality.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-7-apatel@ventanamicro.com
|
|
Pass a queue_limits to blk_mq_init_queue and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Also rename the function to blk_mq_alloc_queue as that is a much better
name for a function that allocates a queue and always pass the queuedata
argument instead of having a separate version for the extra argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If ufshcd_err_handler() is called in a suspend/resume situation,
ufs_release() can be called twice and active_reqs end up going negative.
This is because ufshcd_err_handling_prepare() and
ufshcd_err_handling_unprepare() both call ufshcd_release().
Remove superfluous call to ufshcd_release().
Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
Link: https://lore.kernel.org/r/20240122083324.11797-1-hy50.seo@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When task_tag >= 32 (in MCQ mode) and sizeof(unsigned int) == 4, 1U <<
task_tag will out of bounds for a u32 mask. Fix this up to prevent
SHIFT_ISSUE (bitwise shifts that are out of bounds for their data type).
[name:debug_monitors&]Unexpected kernel BRK exception at EL1
[name:traps&]Internal error: BRK handler: 00000000f2005514 [#1] PREEMPT SMP
[name:mediatek_cpufreq_hw&]cpufreq stop DVFS log done
[name:mrdump&]Kernel Offset: 0x1ba5800000 from 0xffffffc008000000
[name:mrdump&]PHYS_OFFSET: 0x80000000
[name:mrdump&]pstate: 22400005 (nzCv daif +PAN -UAO)
[name:mrdump&]pc : [0xffffffdbaf52bb2c] ufshcd_clear_cmd+0x280/0x288
[name:mrdump&]lr : [0xffffffdbaf52a774] ufshcd_wait_for_dev_cmd+0x3e4/0x82c
[name:mrdump&]sp : ffffffc0081471b0
<snip>
Workqueue: ufs_eh_wq_0 ufshcd_err_handler
Call trace:
dump_backtrace+0xf8/0x144
show_stack+0x18/0x24
dump_stack_lvl+0x78/0x9c
dump_stack+0x18/0x44
mrdump_common_die+0x254/0x480 [mrdump]
ipanic_die+0x20/0x30 [mrdump]
notify_die+0x15c/0x204
die+0x10c/0x5f8
arm64_notify_die+0x74/0x13c
do_debug_exception+0x164/0x26c
el1_dbg+0x64/0x80
el1h_64_sync_handler+0x3c/0x90
el1h_64_sync+0x68/0x6c
ufshcd_clear_cmd+0x280/0x288
ufshcd_wait_for_dev_cmd+0x3e4/0x82c
ufshcd_exec_dev_cmd+0x5bc/0x9ac
ufshcd_verify_dev_init+0x84/0x1c8
ufshcd_probe_hba+0x724/0x1ce0
ufshcd_host_reset_and_restore+0x260/0x574
ufshcd_reset_and_restore+0x138/0xbd0
ufshcd_err_handler+0x1218/0x2f28
process_one_work+0x5fc/0x1140
worker_thread+0x7d8/0xe20
kthread+0x25c/0x468
ret_from_fork+0x10/0x20
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Link: https://lore.kernel.org/r/20240205104905.24929-1-alice.chao@mediatek.com
Reviewed-by: Stanley Jhu <chu.stanley@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Mike Christie <michael.christie@oracle.com> says:
The following patches were made over Linus's tree which contains a fix
for sd which was not in Martin's branches.
The patches allow scsi_execute_cmd users to have scsi-ml retry the cmd
for it instead of the caller having to parse the error and loop
itself.
Link: https://lore.kernel.org/r/20240123002220.129141-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This has the SCSI midlayer retry errors instead of driving them itself.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-19-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On sa8775p-ride, probing the HBA will go through the
UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH path although the power info is
the same during the second init.
The REINIT quirk only applies starting with controller v4. For these,
ufs_qcom_get_hs_gear() reads the highest supported gear when setting the
host_params. After the negotiation, if the host and device are on the same
gear, it is the highest gear supported between the two. Skip REINIT to save
some time.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Link: https://lore.kernel.org/r/20240123192854.1724905-4-echanude@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The comments that currently are within the hw_ver < 4 conditional are
misleading. They really apply to various branches of the conditionals there
and incorrectly state that the phy_gear value can increase.
Right now the logic is to:
- Default to max supported gear for phy_gear
- Set phy_gear to minimum value if version < 4 since those versions only
support one PHY init sequence (and therefore don't need reinit)
- Set phy_gear to the optimal value if the device version is already
populated in the controller registers on boot
Let's move some of the comment to outside the if statement and clean up the
bit left about switching to a higher gear on reinit. This way the comment
more accurately reflects the logic.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240123-ufs-reinit-comments-v1-1-ff2b3532d7fe@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The 'hwq' parameter is not used in this function. Remove unused parameters.
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240105021041.20400-3-cw9316.lee@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use ufshcd_mcq_req_to_hwq() to remove unnecessary variables and simplify.
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240105021041.20400-2-cw9316.lee@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of hardcoding the register field, add the proper definition. While
at it, let's also use ufshcd_rmwl() to simplify updating this register.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240102014222.23351-1-cw9316.lee@samsung.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Change default autosuspend timer from 2000 ms to 500 ms for the MediaTek
driver.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240109124015.31359-3-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The runtime suspend timer delay is a const value in scsi_host_template
which a host driver cannot modify at runtime. Move the delay to Scsi_Host
to allow a driver to update it.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240109124015.31359-2-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Disable MCQ IRQ when clock is off. This is same as legacy mode.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231221110416.16176-4-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix TM cmd timeout issue in MCQ mode using the default resume call
ufshcd_make_hba_operational() to set TM cmd DMA address.
This flow is the same as UFS initialization after link startup and then
setting MCQ related registers if using MCQ mode.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231221110416.16176-3-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
To prevent SSU(Active) error, check link status after exiting hibern8. If
link is not VS_LINK_UP, return error and do ufshcd_link_recovery.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231221110416.16176-2-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The PM QoS feature found in the MediaTek UFS driver was moved to the UFSHCD
core. Hence remove it from MediaTek UFS driver as it is redundant now.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Maramaina Naresh <quic_mnaresh@quicinc.com>
Link: https://lore.kernel.org/r/20231219123706.6463-3-quic_mnaresh@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Register UFS driver to CPU latency PM QoS framework to improve UFS device
random I/O performance.
PM QoS initialization will insert new QoS request into the CPU latency QoS
list with the maximum latency PM_QOS_DEFAULT_VALUE value.
The UFS driver will vote for performance mode on scale up and power save
mode for scale down.
If clock scaling feature is not enabled then voting will be based on clock
on or off condition. Also provide a sysfs interface to enable/disable PM
QoS feature.
tiotest benchmark tool I/O performance results on sm8550 platform:
1. Without PM QoS support
Type (Speed in) | Average of 18 iterations
Random Write(IPOS) | 41065.13
Random Read(IPOS) | 37101.3
2. With PM QoS support
Type (Speed in) | Average of 18 iterations
Random Write(IPOS) | 46784.9
Random Read(IPOS) | 42943.4
(Improvement with PM QoS = ~15%).
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Co-developed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Maramaina Naresh <quic_mnaresh@quicinc.com>
Link: https://lore.kernel.org/r/20231219123706.6463-2-quic_mnaresh@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Final round of fixes that came in too late to send in the first
request.
It's nine bug fixes and one version update (because of a bug fix) and
one set of PCI ID additions. There's one bug fix in the core which is
really a one liner (except that an additional sdev pointer was added
for convenience) and the rest are in drivers"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Add TMF to tmr_list handling
scsi: core: Kick the requeue list after inserting when flushing
scsi: fnic: unlock on error path in fnic_queuecommand()
scsi: fcoe: Fix unsigned comparison with zero in store_ctlr_mode()
scsi: mpi3mr: Fix mpi3mr_fw.c kernel-doc warnings
scsi: smartpqi: Bump driver version to 2.1.26-030
scsi: smartpqi: Fix logical volume rescan race condition
scsi: smartpqi: Add new controller PCI IDs
scsi: ufs: qcom: Remove unnecessary goto statement from ufs_qcom_config_esi()
scsi: ufs: core: Remove the ufshcd_hba_exit() call from ufshcd_async_scan()
scsi: ufs: core: Simplify power management during async scan
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (135 commits)
scsi: ufs: core: Simplify ufshcd_auto_hibern8_update()
scsi: ufs: core: Rename ufshcd_auto_hibern8_enable() and make it static
scsi: ufs: qcom: Fix ESI vector mask
scsi: ufs: host: Fix kernel-doc warning
scsi: hisi_sas: Correct the number of global debugfs registers
scsi: hisi_sas: Rollback some operations if FLR failed
scsi: hisi_sas: Check before using pointer variables
scsi: hisi_sas: Replace with standard error code return value
scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM
scsi: ufs: core: Add sysfs node for UFS RTC update
scsi: ufs: core: Add UFS RTC support
scsi: ufs: core: Add ufshcd_is_ufs_dev_busy()
scsi: ufs: qcom: Remove unused definitions
scsi: ufs: qcom: Use ufshcd_rmwl() where applicable
scsi: ufs: qcom: Remove support for host controllers older than v2.0
scsi: ufs: qcom: Simplify ufs_qcom_{assert/deassert}_reset
scsi: ufs: qcom: Initialize cycles_in_1us variable in ufs_qcom_set_core_clk_ctrl()
scsi: ufs: qcom: Sort includes alphabetically
scsi: ufs: qcom: Remove unused ufs_qcom_hosts struct array
scsi: ufs: qcom: Use dev_err_probe() to simplify error handling of devm_gpiod_get_optional()
...
|
|
There is only one place where goto is used, and it is unnecessary to check
the ret value through 'goto out' because the ret value is already true.
Therefore, remove the goto statement and integrate the '!ret' condition
into the existing code.
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20231219082740.27644-1-cw9316.lee@samsung.com
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Calling ufshcd_hba_exit() from a function that is called asynchronously
from ufshcd_init() is wrong because this triggers multiple race
conditions. Instead of calling ufshcd_hba_exit(), log an error message.
Reported-by: Daniel Mentz <danielmentz@google.com>
Fixes: 1d337ec2f35e ("ufs: improve init sequence")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231218225229.2542156-3-bvanassche@acm.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_init() calls pm_runtime_get_sync() before it calls
async_schedule(). ufshcd_async_scan() calls pm_runtime_put_sync() directly
or indirectly from ufshcd_add_lus(). Simplify ufshcd_async_scan() by always
calling pm_runtime_put_sync() from ufshcd_async_scan().
Cc: <stable@vger.kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231218225229.2542156-2-bvanassche@acm.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When accessing sq_tail_slot without protection from sq_lock, a race
condition can cause multiple SQEs to be copied to duplicate SQE slots. This
can lead to multiple stability issues. Fix this by moving the *dest
initialization in ufshcd_send_command() back under protection from the
sq_lock.
Fixes: 3c85f087faec ("scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command()")
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1702913550-20631-1-git-send-email-quic_cang@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufs_qcom_clk_scale_notify()
In commit 031312dbc695 ("scsi: ufs: ufs-qcom: Remove unnecessary goto
statements") the error handling was accidentally changed, resulting in the
error of ufs_qcom_clk_scale_*() calls not being returned.
This is the case I checked:
ufs_qcom_clk_scale_notify ->
'ufs_qcom_clk_scale_up_/down_pre_change' error ->
return 0;
Make sure those errors are properly returned.
Fixes: 031312dbc695 ("scsi: ufs: ufs-qcom: Remove unnecessary goto statements")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20231215003812.29650-1-cw9316.lee@samsung.com
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Calls to ufshcd_auto_hibern8_update() are already serialized: this function
is either called if user space software is not running (preparing to
suspend) or from a single sysfs store callback function. Kernfs serializes
sysfs .store() callbacks. No functionality is changed.
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Cc: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231214192416.3638077-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Rename ufshcd_auto_hibern8_enable() into ufshcd_configure_auto_hibern8()
since this function can enable or disable auto-hibernation. Since
ufshcd_auto_hibern8_enable() is only used inside the UFSHCI driver core,
declare it static. Additionally, move the definition of this function to
just before its first caller.
Suggested-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Cc: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231214192416.3638077-2-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
While cleaning up the code to use ufshcd_rmwl() helper, the ESI vector mask
was changed incorrectly. Fix it and also define a proper macro for the
value together with FIELD_PREP().
Reported-by: Andrew Halaney <ahalaney@redhat.com>
Fixes: 0e9f4375db1c ("scsi: ufs: qcom: Use ufshcd_rmwl() where applicable")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231214125532.55109-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit fa3dca8251c4 ("scsi: ufs: host: Rename structure ufs_dev_params
to ufs_host_params") inadvertently introduced a comment line without
'*' prefix. Format the comment section correctly.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312171915.YhlTLvLL-lkp@intel.com/
Fixes: fa3dca8251c4 ("scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bean Huo <beanhuo@iokpp.de> says:
Adding RTC support for embedded storage device UFS in its driver, it
is important for a few key reasons:
1. Helps with Regular Maintenance:
The RTC provides a basic way to keep track of time, making it useful for
scheduling routine maintenance tasks in the storage device. This includes
things like making sure data is spread
evenly across the storage to extend its life.
2. Figuring Out How Old Data Is:
The RTC helps the device estimate how long ago certain parts of the storage
were last used. This is handy for deciding when to do maintenance tasks to
keep the storage working well over time.
3. Making Devices Last Longer:
By using the RTC for regular upkeep, we can make sure the storage device lasts
longer and stays reliable. This is especially important for devices that need
to work well for a long time.
4.Fitting In with Other Devices:
The inclusion of RTC support aligns with existing UFS specifications (starting
from UFS Spec 2.0) and is consistent with the prevalent industry practice. Many
UFS devices currently on the market utilize RTC for internal timekeeping. By
ensuring compatibility with this widely adopted standard, the embedded storage
device becomes seamlessly integrable with existing hardware and software
ecosystems, reducing the risk of compatibility issues.
In short, adding RTC support to embedded storage device UFS helps with regular
upkeep, extends the device's life, ensures compatibility, and keeps everything
running smoothly with the rest of the system.
Link: https://lore.kernel.org/r/20231212220825.85255-1-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce a sysfs node named 'rtc_update_ms' within the kernel, enabling
user to adjust the RTC periodic update frequency to suit the specific
requirements of the system and UFS. Also, this patch allows the user to
disable/enable periodic update RTC in the UFS idle time.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20231212220825.85255-4-beanhuo@iokpp.de
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add Real Time Clock (RTC) support for UFS device. This enhancement is
crucial for the internal maintenance operations of the UFS device. The
patch enables the device to handle both absolute and relative time
information. Furthermore, it includes periodic task to update the RTC in
accordance with the UFS Spec, ensuring the accuracy of RTC information for
the device's internal processes.
RTC and qTimestamp serve distinct purposes. The RTC provides a coarse level
of granularity with, at best, approximate single-second resolution. This
makes the RTC well-suited for the device to determine the approximate age
of programmed blocks after being updated by the host. On the other hand,
qTimestamp offers nanosecond granularity and is specifically designed for
synchronizing Device Error Log entries with corresponding host-side logs.
Given that the RTC has been a standard feature since UFS Spec 2.0, and
qTimestamp was introduced in UFS Spec 4.0, the majority of UFS devices
currently on the market rely on RTC. Therefore, it is advisable to continue
supporting RTC in the Linux kernel. This ensures compatibility with the
prevailing UFS device implementations and facilitates seamless integration
with existing hardware. By maintaining support for RTC, we ensure broad
compatibility and avoid potential issues arising from deviations in device
specifications across different UFS versions.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Mike Bi <mikebi@micron.com>
Signed-off-by: Luca Porzio <lporzio@micron.com>
Link: https://lore.kernel.org/r/20231212220825.85255-3-beanhuo@iokpp.de
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add helper inline for retrieving whether UFS device is busy or not.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20231212220825.85255-2-beanhuo@iokpp.de
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> says:
Hello,
This series has code some cleanups to the Qcom UFS driver. No
functional change. In this version, I've removed code supporting
legacy controllers ver < 2.0, as the respective platforms were never
supported in upstream.
Tested on: RB5 development board based on Qcom SM8250 SoC.
Link: https://lore.kernel.org/r/20231208065902.11006-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove unused definitions.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-18-manivannan.sadhasivam@linaro.org
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of using both ufshcd_readl() and ufshcd_writel() to read/modify/
write a register, let's make use of the existing helper.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-17-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The legacy platforms making use of host controllers older than version 2.0
are not supported in upstream. So there is no need to carry code to support
them.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-16-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In both the functions, UFS_PHY_SOFT_RESET contains the mask of the reset
bit. So this can be passed directly as the value to be written for
asserting the reset. For deasserting, 0 can be passed.
This gets rid of the FIELD_PREP() inside these functions and also
UFS_PHY_RESET_{ENABLE/DISABLE} definitions.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-15-manivannan.sadhasivam@linaro.org
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufs_qcom_set_core_clk_ctrl()
In case the "core_clk_unipro" clock is not provided, "cycles_in_1us"
variable will be used as uninitialized. So initialize it with 0.
Issue reported by Smatch tool:
drivers/ufs/host/ufs-qcom.c:1336 ufs_qcom_set_core_clk_ctrl() error: uninitialized symbol 'cycles_in_1us'.
drivers/ufs/host/ufs-qcom.c:1341 ufs_qcom_set_core_clk_ctrl() error: uninitialized symbol 'cycles_in_1us'.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-14-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Sort includes alphabetically.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-13-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufs_qcom_hosts array is assigned, but not used anywhere. So let's remove
it.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-12-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
devm_gpiod_get_optional()
As done in other places, let's use dev_err_probe() to simplify the error
handling while acquiring the device reset gpio using
devm_gpiod_get_optional().
While at it, let's reword the error message to make it clear that the
failure is due to acquiring "device reset gpio".
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-11-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
devm_kzalloc() will itself print the error message on failure. So let's get
rid of the redundant error message in ufs_qcom_init().
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-10-manivannan.sadhasivam@linaro.org
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If ufs_qcom_power_up_sequence() fails, then it makes no sense to enable the
lane clocks and continue ufshcd_hba_enable(). So let's check the return
value of ufs_qcom_power_up_sequence().
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-9-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Even though core_reset is optional, a failure during assert/deassert should
be considered fatal, if core_reset is available. So fail
ufs_qcom_power_up_sequence() if an error happens during reset and also get
rid of the redundant warning as the ufs_qcom_host_reset() function itself
prints error messages.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-8-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of duplicating the enable/disable IRQ part, let's export the
helpers available in ufshcd driver and make use of them. This also fixes
the possible redundant IRQ disable before asserting reset (when IRQ was
already disabled).
Fixes: 4a791574a0cc ("scsi: ufs: ufs-qcom: Disable interrupt in reset path")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-7-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
core_reset is optional, so there is no need to warn the user if it is not
available.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-6-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are many instances where the variable assignments are not needed.
Remove them.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-5-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The return value should be -ENODEV indicating that the resource is not
provided in DT, not -ENOMEM. Fix it!
Fixes: c263b4ef737e ("scsi: ufs: core: mcq: Configure resource regions")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-4-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the function returns -EINVAL if algorithm other than AES-256-XTS
is requested. But the correct error code is -EOPNOTSUPP. Fix it!
Cc: Abel Vesa <abel.vesa@linaro.org>
Fixes: 56541c7c4468 ("scsi: ufs: ufs-qcom: Switch to the new ICE API")
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-3-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Lane clock handling can be simplified by using the clk_bulk APIs. So let's
make use of them. This also get's rid of the clock validation in the driver
as kernel should just rely on the firmware (DT/ACPI) to provide the clocks
required for proper functioning.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-2-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Can Guo <quic_cang@quicinc.com> says:
This series enables HS-G5 support on SM8550.
This series is rebased on below changes from Mani -
https://patchwork.kernel.org/project/linux-scsi/patch/20230908145329.154024-1-manivannan.sadhasivam@linaro.org/
https://patchwork.kernel.org/project/linux-scsi/patch/20230908145329.154024-2-manivannan.sadhasivam@linaro.org/
This series is tested on below HW combinations -
SM8550 MTP + UFS4.0
SM8550 QRD + UFS3.1
SM8450 MTP + UFS3.1 (for regression test)
SM8350 MTP + UFS3.1 (for regression test)
Note that during reboot test on above platforms, I occasinally hit
PA (PHY) error during the 2nd init, this is not related with this
series. A fix for this is mentioned in below patchwork -
https://patchwork.kernel.org/project/linux-scsi/patch/1698145815-17396-1-git-send-email-quic_ziqichen@quicinc.com/
Also note that on platforms, which have two sets of UFS PHY settings
are provided (say G4 and no-G4, G5 and no-G5). The two sets of PHY
settings are basically programming different values to different
registers, mixing the two sets and/or overwriting one set with another
set is definitely not blessed by UFS PHY designers. For SM8550, this
series will make sure we honor the rule. However, for old targets Mani
and I will fix them in another series in future.
Link: https://lore.kernel.org/r/1701520577-31163-1-git-send-email-quic_cang@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Start from HW ver 5, a spare register in UFS host controller is added and
used to indicate the UFS device version. The spare register is populated by
bootloader for now, but in future it will be populated by HW automatically
during link startup with its best efforts in any boot stage prior to Linux.
During host driver init, read the spare register, if it is not populated
with a UFS device version, go ahead with the dual init mechanism. If a UFS
device version is in there, use the UFS device version together with host
controller's HW version to decide the proper PHY gear which should be used
to configure the UFS PHY without going through the second init.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-9-git-send-email-quic_cang@quicinc.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In ufs_qcom_power_up_sequence(), check return value of phy_set_mode_ext()
and stop proceeding if phy_set_mode_ext() fails.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-8-git-send-email-quic_cang@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since HW ver 4, max HS gear can be get from UFS host controller's register,
use the max HS gear as the initial PHY gear instead of UFS_HS_G2, so that
we don't need to update the hard code for newer targets in future.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-7-git-send-email-quic_cang@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Qcom UFS hosts, with HW ver 5, can only support up to HS-G5 Rate-A due to
HW limitations. If the HS-G5 PHY gear is used, update host_params->hs_rate
to Rate-A, so that the subsequent power mode changes shall stick to Rate-A.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-6-git-send-email-quic_cang@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During host driver init, the phy_gear is set to the minimum supported gear
(HS_G2). Then, during the first power mode change, the negotiated gear, say
HS-G4, is updated to the phy_gear variable so that in the second init the
updated phy_gear can be used to program the PHY.
But the current code only allows update the phy_gear to a higher value. If
one wants to start the first init with the maximum support gear, say HS-G4,
the phy_gear is not updated to HS-G3 if the device only supports HS-G3.
The original check added there is intend to make sure the phy_gear won't be
updated when gear is scaled down (during clock scaling). Update the check
so that one can start the first init with the maximum support gear without
breaking the original fix by checking the ufshcd_state, that is, allow
update to phy_gear only if power mode change is invoked from
ufshcd_probe_hba().
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-5-git-send-email-quic_cang@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Setup host power mode and its limitations during UFS host driver init to
avoid repetitive work during every power mode change.
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Co-developed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-4-git-send-email-quic_cang@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In ufs_qcom_pwr_change_notify(), host_params.hs_rate has been set to
PA_HS_MODE_B by ufshcd_init_host_param(), hence remove the duplicated line
of work. Meanwhile, removed the macro UFS_QCOM_LIMIT_HS_RATE as it is only
used here.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-3-git-send-email-quic_cang@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Structure ufs_dev_params is actually used in UFS host drivers to declare
host specific power mode parameters, like ufs_<vendor>_params or host_cap,
which makes the code not very straightforward to read. Rename the structure
ufs_dev_params to ufs_host_params and unify the declarations in all drivers
to host_params.
In addition, rename the two functions ufshcd_init_pwr_dev_param() and
ufshcd_get_pwr_dev_param() which work based on the ufs_host_params to
ufshcd_init_host_params() and ufshcd_negotiate_pwr_params() respectively to
avoid confusions.
This change does not change any functionalities or logic.
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1701520577-31163-2-git-send-email-quic_cang@quicinc.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
OPP support added by commit 72208ebe181e ("scsi: ufs: core: Add support for
parsing OPP") doesn't update the min_freq and max_freq of each clock in
'struct ufs_clk_info'.
But these values are used by the host drivers internally for controller
configuration. When the OPP support is enabled in devicetree, these values
will be 0, causing boot issues on the respective platforms.
So add support to parse the min_freq and max_freq of all clocks while
parsing the OPP table.
Fixes: 72208ebe181e ("scsi: ufs: core: Add support for parsing OPP")
Co-developed-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20231208131331.12596-1-quic_nitirawa@quicinc.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In MCQ mode, if cmd is pending in device and abort succeeds, response will
not be returned by device. So we need clear the cmd, otherwise timeout will
happen and next time we use same tag we will get a WARN_ON(lrbp->cmd).
Below is error log:
<3>[ 2277.447611][T21376] ufshcd-mtk 112b0000.ufshci: ufshcd_try_to_abort_task: cmd pending in the device. tag = 7
<3>[ 2277.476954][T21376] ufshcd-mtk 112b0000.ufshci: Aborting tag 7 / CDB 0x2a succeeded
<6>[ 2307.551263][T30974] ufshcd-mtk 112b0000.ufshci: ufshcd_abort: Device abort task at tag 7
<4>[ 2307.623264][ T327] WARNING: CPU: 5 PID: 327 at source/drivers/ufs/core/ufshcd.c:3021 ufshcd_queuecommand+0x66c/0xe34
Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode")
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231115131024.15829-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_prepare_utp_scsi_cmd_upiu() only uses the lowest eight bits of
lrbp->task_tag. Issue a runtime warning if this results in truncation.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231115193359.2262044-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The UFS driver has two driver-specific fault injection mechanisms
(trigger_eh and timeout). Each fault injection configuration can only be
specified by a module parameter and cannot be reconfigured without
reloading the driver. Also, each configuration is common to all HBAs.
This change adds the following subdirectories for each UFS HBA when
debugfs is enabled:
/sys/kernel/debug/ufshcd/<HBA>/timeout_inject
/sys/kernel/debug/ufshcd/<HBA>/trigger_eh_inject
Each fault injection attribute can be dynamically set per HBA by a
corresponding file in these directories.
This is tested with QEMU UFS devices.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20231118124443.1007116-1-akinobu.mita@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Having UFS power info available in sysfs makes it easier to tell the state
of the link during runtime considering we have a bunch of power saving
features and various combinations for backward compatibility.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1698890324-7374-1-git-send-email-quic_cang@quicinc.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in queued fixes for 6.7
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If command timeout happens and cq complete IRQ is raised at the same time,
ufshcd_mcq_abort clears lprb->cmd and a NULL pointer deref happens in the
ISR. Error log:
ufshcd_abort: Device abort task at tag 18
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000108
pc : [0xffffffe27ef867ac] scsi_dma_unmap+0xc/0x44
lr : [0xffffffe27f1b898c] ufshcd_release_scsi_cmd+0x24/0x114
Fixes: f1304d442077 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231106075117.8995-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The UFSHCI 4.0 specification mandates that there should always be at least
one empty slot in each queue for distinguishing between full and empty
states. Enlarge 'hwq->max_entries' to 'DeviceQueueDepth + 1' to allow
UFSHCI 4.0 controllers to fully utilize MCQ queue slots.
Fixes: 4682abfae2eb ("scsi: ufs: core: mcq: Allocate memory for MCQ mode")
Signed-off-by: Naomi Chu <naomi.chu@mediatek.com>
Link: https://lore.kernel.org/r/20231102052426.12006-2-naomi.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Chun-Hung <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc,
scsi_debug) plus the usual assorted minor fixes and updates.
The major change this time around is a prep patch for rethreading of
the driver reset handler API not to take a scsi_cmd structure which
starts to reduce various drivers' dependence on scsi_cmd in error
handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits)
scsi: ufs: core: Leave space for '\0' in utf8 desc string
scsi: ufs: core: Conversion to bool not necessary
scsi: ufs: core: Fix race between force complete and ISR
scsi: megaraid: Fix up debug message in megaraid_abort_and_reset()
scsi: aic79xx: Fix up NULL command in ahd_done()
scsi: message: fusion: Initialize return value in mptfc_bus_reset()
scsi: mpt3sas: Fix loop logic
scsi: snic: Remove useless code in snic_dr_clean_pending_req()
scsi: core: Add comment to target_destroy in scsi_host_template
scsi: core: Clean up scsi_dev_queue_ready()
scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
scsi: target: core: Fix kernel-doc comment
scsi: pmcraid: Fix kernel-doc comment
scsi: core: Handle depopulation and restoration in progress
scsi: ufs: core: Add support for parsing OPP
scsi: ufs: core: Add OPP support for scaling clocks and regulators
scsi: ufs: dt-bindings: common: Add OPP table
scsi: scsi_debug: Add param to control sdev's allow_restart
scsi: scsi_debug: Add debugfs interface to fail target reset
scsi: scsi_debug: Add new error injection type: Reset LUN failed
...
|
|
utf16s_to_utf8s does not NULL terminate the output string. For us to be
able to add a NULL character when utf16s_to_utf8s returns, we need to make
sure that there is space for such NULL character at the end of the output
buffer. We can achieve this by passing an output buffer size to
utf16s_to_utf8s that is one character less than what we allocated.
Other call sites of utf16s_to_utf8s appear to be using the same technique
where they artificially reduce the buffer size by one to leave space for a
NULL character or line feed character.
Fixes: 4b828fe156a6 ("scsi: ufs: revamp string descriptor reading")
Reviewed-by: Mars Cheng <marscheng@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Yen-lin Lai <yenlinlai@google.com>
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://lore.kernel.org/r/20231017182026.2141163-1-danielmentz@google.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A logical evaluation already results in bool. There is no need for using a
ternary operator based evaluation and bool conversion of the outcome.
Issue identified using boolconv.cocci Coccinelle semantic patch.
Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com>
Link: https://lore.kernel.org/r/20231024183401.48888-1-bragathemanick0908@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
While error handler force complete command (Thread A) and completion IRQ
raising (Thread B) of the same command, it may cause race condition.
Below is racing step (from 1 to 6):
ufshcd_mcq_compl_pending_transfer (Thread A)
1 if (cmd && !test_bit(SCMD_STATE_COMPLETE, &cmd->state)) {
5 spin_lock_irqsave(&hwq->cq_lock, flags); // wait lock release
set_host_byte(cmd, DID_REQUEUE);
6 ufshcd_release_scsi_cmd(hba, lrbp); // access null pointer
scsi_done(cmd);
spin_unlock_irqrestore(&hwq->cq_lock, flags);
}
ufshcd_mcq_poll_cqe_lock (Thread B)
2 spin_lock_irqsave(&hwq->cq_lock, flags);
ufshcd_mcq_poll_cqe_nolock()
ufshcd_compl_one_cqe()
3 ufshcd_release_scsi_cmd() // lrbp->cmd = NULL;
4 spin_unlock_irqrestore(&hwq->cq_lock, flags);
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Link: https://lore.kernel.org/r/20231024084324.12197-1-alice.chao@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
OPP framework can be used to scale the clocks along with other entities
such as regulators, performance state etc... So let's add support for
parsing OPP from devicetree. OPP support in devicetree is added through the
"operating-points-v2" property which accepts the OPP table defining clock
frequency, regulator voltage, power domain performance state etc...
Since the UFS controller requires multiple clocks to be controlled for
proper working, devm_pm_opp_set_config() has been used which supports
scaling multiple clocks through custom ufshcd_opp_config_clks() callback.
It should be noted that the OPP support is not compatible with the old
"freq-table-hz" property. So only one can be used at a time even though
the UFS core supports both.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS core is only scaling the clocks during devfreq scaling and
initialization. But for an optimum power saving, regulators should also be
scaled along with the clocks.
So let's use the OPP framework which supports scaling clocks, regulators,
and performance state using OPP table defined in devicetree. For
accomodating the OPP support, the existing APIs (ufshcd_scale_clks,
ufshcd_is_devfreq_scaling_required and ufshcd_devfreq_scale) are modified
to accept "freq" as an argument which in turn used by the OPP helpers.
The OPP support is added along with the old freq-table based clock scaling
so that the existing platforms work as expected.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When no active_reqs, devfreq_monitor (thread A) will suspend clock scaling.
But it may have racing with clk_scaling.suspend_work (thread B) and
actually not suspend clock scaling (requeue after suspend). Next time
after polling_ms, devfreq_monitor read clk_scaling.window_start_t = 0 then
scale up clock abnormal.
Below is racing step:
devfreq->work (Thread A)
devfreq_monitor
update_devfreq
.....
ufshcd_devfreq_target
queue_work(hba->clk_scaling.workq,
1 &hba->clk_scaling.suspend_work)
.....
5 queue_delayed_work(devfreq_wq, &devfreq->work,
msecs_to_jiffies(devfreq->profile->polling_ms));
2 hba->clk_scaling.suspend_work (Thread B)
ufshcd_clk_scaling_suspend_work
__ufshcd_suspend_clkscaling
devfreq_suspend_device(hba->devfreq);
3 cancel_delayed_work_sync(&devfreq->work);
4 hba->clk_scaling.window_start_t = 0;
.....
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20230831130826.5592-4-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When ufshcd_clk_scaling_suspend_work (thread A) running and new command
coming, ufshcd_clk_scaling_start_busy (thread B) may get host_lock after
thread A first time release host_lock. Then thread A second time get
host_lock will set clk_scaling.window_start_t = 0 which scale up clock
abnormal next polling_ms time. Also inlines another
__ufshcd_suspend_clkscaling calls.
Below is racing step:
1 hba->clk_scaling.suspend_work (Thread A)
ufshcd_clk_scaling_suspend_work
2 spin_lock_irqsave(hba->host->host_lock, irq_flags);
3 hba->clk_scaling.is_suspended = true;
4 spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
__ufshcd_suspend_clkscaling
7 spin_lock_irqsave(hba->host->host_lock, flags);
8 hba->clk_scaling.window_start_t = 0;
9 spin_unlock_irqrestore(hba->host->host_lock, flags);
ufshcd_send_command (Thread B)
ufshcd_clk_scaling_start_busy
5 spin_lock_irqsave(hba->host->host_lock, flags);
....
6 spin_unlock_irqrestore(hba->host->host_lock, flags);
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20230831130826.5592-3-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If clock scale up and suspend clock scaling, ufs will keep high
performance/power mode but no read/write requests on going. It is logic
wrong and have power concern.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20230831130826.5592-2-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The "attr" pointer points to an offset into the "host" struct so it can't
be NULL. Delete the if statement and pull the code in a tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/fe3b8fcd-64a7-4887-bddd-32239a88a6a3@moroto.mountain
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The acpi_evaluate_dsm_typed() provides a way to check the type of the
object evaluated by _DSM call. Use it instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231002135125.2602895-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If a dev command times out, clk_scaling.active_reqs is not decreased which
causes abnormal clock scaling.
It is complicated to handle different dev command timeout cases in both
legacy mode and MCQ mode. Besides, dev cmds are rarely used and the busy
time is short.
Remove clock scaling busy window for dev cmds like we do for UIC or TM cmds
which don't update busy window either.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231004062454.29165-1-peter.wang@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The clear TM function error log status was inverted.
Fixes: 4693fad7d6d4 ("scsi: ufs: core: Log error handler activity")
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231003022002.25578-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When runtime PM send SSU times out, the SCSI core invokes
eh_host_reset_handler, in this case ufshcd_eh_host_reset_handler(), which
is then stuck waiting for flush_work(&hba->eh_work). However,
ufshcd_err_handler hangs in wait RPM resume. Do link recovery only in this
case. The following IO hang stack dump was observed:
kworker/4:0 D
<ffffffd7d31f6fb4> __switch_to+0x180/0x344
<ffffffd7d31f779c> __schedule+0x5ec/0xa14
<ffffffd7d31f7c3c> schedule+0x78/0xe0
<ffffffd7d31fefbc> schedule_timeout+0xb0/0x15c
<ffffffd7d31f8120> io_schedule_timeout+0x48/0x70
<ffffffd7d31f8e40> do_wait_for_common+0x108/0x19c
<ffffffd7d31f837c> wait_for_completion_io_timeout+0x50/0x78
<ffffffd7d2876bc0> blk_execute_rq+0x1b8/0x218
<ffffffd7d2b4297c> scsi_execute_cmd+0x148/0x238
<ffffffd7d2da7358> ufshcd_set_dev_pwr_mode+0xe8/0x244
<ffffffd7d2da7e40> __ufshcd_wl_resume+0x1e0/0x45c
<ffffffd7d2da7b28> ufshcd_wl_runtime_resume+0x3c/0x174
<ffffffd7d2b4f290> scsi_runtime_resume+0x7c/0xc8
<ffffffd7d2ae1d48> __rpm_callback+0xa0/0x410
<ffffffd7d2ae0128> rpm_resume+0x43c/0x67c
<ffffffd7d2ae1e98> __rpm_callback+0x1f0/0x410
<ffffffd7d2ae014c> rpm_resume+0x460/0x67c
<ffffffd7d2ae1450> pm_runtime_work+0xa4/0xac
<ffffffd7d22e39ac> process_one_work+0x208/0x598
<ffffffd7d22e3fc0> worker_thread+0x228/0x438
<ffffffd7d22eb038> kthread+0x104/0x1d4
<ffffffd7d22171a0> ret_from_fork+0x10/0x20
scsi_eh_0 D
<ffffffd7d31f6fb4> __switch_to+0x180/0x344
<ffffffd7d31f779c> __schedule+0x5ec/0xa14
<ffffffd7d31f7c3c> schedule+0x78/0xe0
<ffffffd7d31fef50> schedule_timeout+0x44/0x15c
<ffffffd7d31f8e40> do_wait_for_common+0x108/0x19c
<ffffffd7d31f8234> wait_for_completion+0x48/0x64
<ffffffd7d22deb88> __flush_work+0x260/0x2d0
<ffffffd7d22de918> flush_work+0x10/0x20
<ffffffd7d2da4728> ufshcd_eh_host_reset_handler+0x88/0xcc
<ffffffd7d2b41da4> scsi_try_host_reset+0x48/0xe0
<ffffffd7d2b410fc> scsi_eh_ready_devs+0x934/0xa40
<ffffffd7d2b41618> scsi_error_handler+0x168/0x374
<ffffffd7d22eb038> kthread+0x104/0x1d4
<ffffffd7d22171a0> ret_from_fork+0x10/0x20
kworker/u16:5 D
<ffffffd7d31f6fb4> __switch_to+0x180/0x344
<ffffffd7d31f779c> __schedule+0x5ec/0xa14
<ffffffd7d31f7c3c> schedule+0x78/0xe0
<ffffffd7d2adfe00> rpm_resume+0x114/0x67c
<ffffffd7d2adfca8> __pm_runtime_resume+0x70/0xb4
<ffffffd7d2d9cf48> ufshcd_err_handler+0x1a0/0xe68
<ffffffd7d22e39ac> process_one_work+0x208/0x598
<ffffffd7d22e3fc0> worker_thread+0x228/0x438
<ffffffd7d22eb038> kthread+0x104/0x1d4
<ffffffd7d22171a0> ret_from_fork+0x10/0x20
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20230927033557.13801-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
Please consider these UFS core patches for the next merge window.
Thanks,
Bart.
Link: https://lore.kernel.org/r/20230921192335.676924-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make the UFS device execute realtime (RT) requests before other requests.
This will be used in Android to reduce the I/O latency of the foreground
app.
Note: UFS devices do not support CDL so using CDL is not a viable
alternative.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-5-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_comp_scsi_upiu() has one caller and that caller ensures that
lrbp->cmd != NULL. Hence leave out the lrbp->cmd check from
ufshcd_comp_scsi_upiu().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-4-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The DMA alignment for the Exynos controller follows directly from the PRDT
segment size configured in ufs-exynos.c. Hence, move the DMA alignment code
into the Exynos driver source code.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-3-bvanassche@acm.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The block layer core guarantees that tag numbers are in the expected
range. Hence remove the statements that check this. This patch suppresses
Coverity warnings about left shifts with a negative right hand operand.
The following commit originally introduced request tag range checks:
14497328b6a6 ("scsi: ufs: verify command tag validity").
Cc: daejun7.park@samsung.com
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-2-bvanassche@acm.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To
improve here there is a quest to make the remove callback return void. In
the first step of this quest all drivers are converted to .remove_new()
which already returns void. Eventually after all drivers are converted,
.remove_new() is renamed to .remove().
All platform drivers below drivers/ufs/ unconditionally return zero in
their remove callback and so can be converted trivially to the variant
returning void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230917145722.1131557-1-u.kleine-koenig@pengutronix.de
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Damien Le Moal <dlemoal@kernel.org> says:
The first patch of this series fixes an issue with IRQ setup which
prevents the controller from resuming after a system suspend. The
following patches are code cleanup without any functional changes.
[mkp: The first patch went into v6.6-rc2 and thus this merge
constitutes the remaining patches of the series]
Link: https://lore.kernel.org/r/20230911232745.325149-1-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Nitin Rawat <quic_nitirawa@quicinc.com> says:
This patch series adds programming support for Qualcomm UFS V4 and
above to align avoid with Hardware Specification. This patch series
will address stability and performance issues.
In this patch series below changes are taken care.
1) Register layout for DME_VS_CORE_CLK_CTRL has changed for v4 and above.
2) Adds Support to configure PA_VS_CORE_CLK_40NS_CYCLES attibute for UFS V4
and above.
3) Adds Support to configure multiple unipro frequencies like 403MHz,
300MHz, 202MHz, 150 MHz, 75Mhz, 37.5 MHz for Qualcomm UFS Controller V4
and above.
4) Allow configuration of SYS1CLK_1US_REG for UFS V4 and above.
Link: https://lore.kernel.org/r/20230905052400.13935-1-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The "hs_gear" variable is used to cache the gear setting for the PHY that
will be used during ufs_qcom_power_up_sequence(). But it creates ambiguity
with the gear setting used by the ufshcd driver.
So let's rename it to "phy_gear" to make it explicit that this variable
caches the gear setting for the PHY.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230908145329.154024-2-manivannan.sadhasivam@linaro.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Tested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The "hs_gear" variable is used to program the PHY settings (submode) during
ufs_qcom_power_up_sequence(). Currently, it is being updated every time the
agreed gear changes. Due to this, if the gear got downscaled before suspend
(runtime/system), then while resuming, the PHY settings for the lower gear
will be applied first and later when scaling to max gear with REINIT, the
PHY settings for the max gear will be applied.
This adds a latency while resuming and also really not needed as the PHY
gear settings are backwards compatible i.e., we can continue using the PHY
settings for max gear with lower gear speed.
So let's update the "hs_gear" variable _only_ when the agreed gear is
greater than the current one. This guarantees that the PHY settings will be
changed only during probe time and fatal error condition.
Due to this, UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH can now be skipped
when the PM operation is in progress.
Cc: stable@vger.kernel.org
Fixes: 96a7141da332 ("scsi: ufs: core: Add support for reinitializing the UFS device")
Reported-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230908145329.154024-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Tested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
SYS1CLK_1US represents the required number of system 1-clock cycles for one
microsecond. UFS Host Controller V4.0 and above mandates to write
SYS1CLK_1US_REG register and also these timer configuration needs to be
called from clk scaling pre ops as per HPG.
Refactor ufs_qcom_cfg_timers and add the below code support to align
with HPG.
a)Configure SYS1CLK_1US_REG for UFS V4 and above.
b)Introduce a new argument is_pre_scale_up for ufs_qcom_cfg_timers
to configure SYS1CLK_1US for max freq during prescale and link startup
condition.
c)Move ufs_qcom_cfg_timers from clk scaling post change ops
to clk scaling pre change ops.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-6-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently CORE_CLK_1US_CYCLES, PA_VS_CORE_CLK_40NS_CYCLES are configured
in clk scaling post change ops. This is not aligning to HPG.
Move this to clk scaling pre change ops to align completely with hardware
specification.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-5-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
PA_VS_CORE_CLK_40NS_CYCLES attribute represents the required number of
Qunipro core clock for 40 nanoseconds. For UFS host controller V4 and above
PA_VS_CORE_CLK_40NS_CYCLES needs to be programmed as per frequency of
unipro core clk of UFS host controller.
Add Support to configure PA_VS_CORE_CLK_40NS_CYCLES for Controller V4 and
above to align with the hardware specification and to avoid functionality
issues like h8 enter/exit failure, command timeout.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-4-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Qualcomm UFS Controller V4 and above supports multiple unipro frequencies
like 403MHz, 300MHz, 202MHz, 150 MHz, 75Mhz, 37.5 MHz. Current code
supports only 150MHz and 75MHz which have performance impact due to low UFS
controller frequencies.
For targets which supports frequencies other than 150 MHz and 75 Mhz, needs
an update of MAX_CORE_CLK_1US_CYCLES to match the configured frequency to
avoid functionality issues. Add multiple frequency support for
MAX_CORE_CLK_1US_CYCLES based on the frequency configured.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-3-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS Controller V4 and above, the register layout for DME_VS_CORE_CLK_CTRL
register has changed. MAX_CORE_CLK_1US_CYCLES offset has changed from 0 to
0x10 and length of attrbute is changed from 8bit to 12bit.
Add support to configure MAX_CORE_CLK_1US_CYCLES for UFS V4 and above as
per new register layout.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-2-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bindings do not allow vdd-hba-max-microamp property and the driver does not
use it (does not control load of vdd-hba supply). Skip looking for this
property to avoid misleading dmesg messages:
ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: unable to find vdd-hba-max-microamp
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230906113302.201888-1-krzysztof.kozlowski@linaro.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The logical unit information is missing from the UFS command tracing
output. Although the device name is logged, e.g. 13200000.ufs, this name
does not include logical unit information. Hence this patch that replaces
the device name with the SCSI ID in the tracing output. An example of
tracing output with this patch applied:
kworker/8:0H-80 [008] ..... 89.106063: ufshcd_command: send_req: 0:0:0:4: tag: 10, DB: 0x7ffffbff, size: 524288, IS: 0, LBA: 1085538, opcode: 0x8a (WRITE_16), group_id: 0x0
dd-4225 [000] d.h.. 89.106219: ufshcd_command: complete_rsp: 0:0:0:4: tag: 11, DB: 0x7ffff7ff, size: 524288, IS: 0, LBA: 1081728, opcode: 0x8a (WRITE_16), group_id: 0x0
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230907183739.905938-1-bvanassche@acm.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
With auto hibern8 enabled, UIC could be busy processing a hibern8 operation
and the HCI would reports UIC not ready for a short while through
HCS.UCRDY. The UFS driver doesn't currently handle this situation. The
UFSHCI spec specifies UCRDY like this: whether the host controller is ready
to process UIC COMMAND
The 'ready' could be seen as many different meanings. If the meaning
includes not processing any request from HCI, processing a hibern8
operation can be 'not ready'. In this situation, the driver needs to wait
until the operations is completed.
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Link: https://lore.kernel.org/r/550484ffb66300bdcec63d3e304dfd55cb432f1f.1693790060.git.kwmad.kim@samsung.com
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Chanwoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
__ufshcd_send_uic_cmd() is wrapped by uic_cmd_mutex and its related
contexts are accessed within the section wrapped by uic_cmd_mutex. Thus,
wrapping with host_lock is redundant.
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Link: https://lore.kernel.org/r/782ba5f26f0a96e58d85dff50751787d2d2a6b2b.1693790060.git.kwmad.kim@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chanwoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
RPMB handler
For advanced RPMB requests, its UPIU package should be fully initialized in
its ufs-bsg-based application, except for task tag. in ufshcd.c, we just
copy UPIU (with CDB) request as-is.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20230809181847.102123-3-beanhuo@iokpp.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
EHS length in UTRD
According to UFSHCI 4.0 specification:
5.2 Host Controller Capabilities Registers
5.2.1 Offset 00h: CAP – Controller Capabilities:
"EHS Length in UTRD Supported (EHSLUTRDS): Indicates whether the host
controller supports EHS Length field in UTRD.
0 – Host controller takes EHS length from CMD UPIU, and SW driver use EHS
Length field in CMD UPIU.
1 – HW controller takes EHS length from UTRD, and SW driver use EHS
Length field in UTRD.
NOTE Recommend Host controllers move to taking EHS length from UTRD, and
in UFS-5, it will be mandatory."
So, when UFSHCI 4.0 doesn't support EHS Length field in UTRD, we could use
EHS Length field in CMD UPIU. Remove the limitation that advanced RPMB only
works when EHS length is supported in UTRD.
Fixes: 6ff265fc5ef6 ("scsi: ufs: core: bsg: Add advanced RPMB support in ufs_bsg")
Co-developed-by: "jonghwi.rha" <jonghwi.rha@samsung.com>
Signed-off-by: "jonghwi.rha" <jonghwi.rha@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20230809181847.102123-2-beanhuo@iokpp.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in the fixes tree for a commit that missed 6.5. Also resolve a
trivial merge conflict in fnic.
* 6.5/scsi-fixes: (36 commits)
scsi: storvsc: Handle additional SRB status values
scsi: snic: Fix double free in snic_tgt_create()
scsi: core: raid_class: Remove raid_component_add()
scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5
scsi: ufs: mcq: Fix the search/wrap around logic
scsi: qedf: Fix firmware halt over suspend and resume
scsi: qedi: Fix firmware halt over suspend and resume
scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock
scsi: lpfc: Remove reftag check in DIF paths
scsi: ufs: renesas: Fix private allocation
scsi: snic: Fix possible memory leak if device_add() fails
scsi: core: Fix possible memory leak if device_add() fails
scsi: core: Fix legacy /proc parsing buffer overflow
scsi: 53c700: Check that command slot is not NULL
scsi: fnic: Replace return codes in fnic_clean_pending_aborts()
scsi: storvsc: Fix handling of virtual Fibre Channel timeouts
scsi: pm80xx: Fix error return code in pm8001_pci_probe()
scsi: zfcp: Defer fc_rport blocking until after ADISC response
scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices
scsi: sg: Fix checking return value of blk_get_queue()
...
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The qunipro_g4_sel clear is also needed for new platforms with major
version > 5. Fix the version check to take this into account.
Fixes: 9c02aa24bf40 ("scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230821-topic-sm8x50-upstream-ufs-major-5-plus-v2-1-f42a4b712e58@linaro.org
Reviewed-by: "Bao D. Nguyen" <quic_nguyenb@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The search and wrap around logic in the ufshcd_mcq_sqe_search() function
does not work correctly when the hwq's queue depth is not a power of two
number. Correct it so that any queue depth with a positive integer value
within the supported range would work.
Signed-off-by: "Bao D. Nguyen" <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/ff49c15be205135ed3ec186f3086694c02867dbd.1692149603.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Fixes: 8d7290348992 ("scsi: ufs: mcq: Add supporting functions for MCQ abort")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Convert ufshcd_pltfrm_init() over to use dev_err_probe() to avoid the
following log message on bootup due to an -EPROBE_DEFER return code:
ufshcd-qcom 1d84000.ufs: Initialization failed
While this line is changed, let's also go ahead and add the error code to
the message as well.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20230814184352.200531-3-bmasney@redhat.com
Reviewed-by: "Bao D. Nguyen" <quic_nguyenb@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Convert ufshcd_variant_hba_init() over to use dev_err_probe() to avoid log
messages like the following on bootup:
ufshcd-qcom 1d84000.ufs: ufshcd_variant_hba_init: variant qcom init
failed err -517
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20230814184352.200531-2-bmasney@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
To ensure that the PCI based QEMU UFS device properly works with Linux,
register the device ID (0x0013) and vendor ID (0x1b36) of QEMU UFS device.
QEMU UFS will enable testing of the UFS driver inside a virtual machine on
systems without UFS host controller. It can also be used to preemptively
implement and test new features before the real device is created.
The new QEMU UFS device can be found at:
https://lore.kernel.org/qemu-devel/20230727155239.GA979354@fedora
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Link: https://lore.kernel.org/r/20230807013726epcms2p1c604cb8e98680aebebb7cc5ab2d580f5@epcms2p1
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Should use devm_kzalloc() for struct ufs_renesas_priv because the
.initialized should be false as default.
Fixes: d69520288efd ("scsi: ufs: ufs-renesas: Add support for Renesas R-Car UFS controller")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20230803081812.1446282-1-yoshihiro.shimoda.uh@renesas.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufs_qcom_bw_table is not modified anywhere. So make it static const so that
it can be placed in read-only memory.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Closes: https://lore.kernel.org/linux-scsi/43cd0057-c6d8-bc92-08f4-d767336d2cfe@acm.org/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230802040154.10652-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
gcc compilers before version 10 cannot do constant-folding for sub-byte
bitfields. This makes the compiler layout tests fail. Hence skip the layout
checks for gcc 9 and before.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/linux-scsi/CA+G9fYur8UJoUyTLJFVEJPh-15TJ7kbdD2q8xVz8a3fLjkxxVw@mail.gmail.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230801232204.1481902-1-bvanassche@acm.org
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 52a518019ca1 ("scsi: ufs: core: Fix missing clk change notification
on host reset") added UFS clock scaling notification to
ufshcd_host_reset_and_restore(). This invokes hibern8 enter and exit on
Qualcomm platform which fails because controller is in reset state.
Fix this by checking the Host controller state before sending hibern8
command.
__ufshcd_wl_resume()
ufshcd_reset_and_restore()
ufshcd_host_reset_and_restore()
ufshcd_scale_clks()
ufshcd_vops_clk_scale_notify()
ufs_qcom_clk_scale_notify()
ufshcd_uic_hibern8_enter()
Fixes: 52a518019ca1 ("scsi: ufs: core: Fix missing clk change notification on host reset")
Co-developed-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230726134140.7180-3-quic_nitirawa@quicinc.com
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Export ufshcd_is_hba_active() to allow driver modules to check the state of
the host controller.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230726134140.7180-2-quic_nitirawa@quicinc.com
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
This patch includes the following changes, none of which should change the
functionality of the UFS host controller driver:
- Improve the kernel-doc headers further.
- Fix multiple W=2 compiler warnings.
- Simplify ufshcd_abort_all().
- Simplify the code for creating and parsing UFS Transport Protocol (UTP)
headers.
Please consider this patch series for the next merge window.
Thanks,
Bart.
Link: https://lore.kernel.org/r/20230727194457.3152309-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make the code that parses UTP transfer request headers easier to read by
using u8 instead of __be32 where appropriate.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-13-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make the code that initializes UTP transfer request headers easier to read
by using bitfields instead of __le32 where appropriate.
Cc: "Bao D. Nguyen" <quic_nguyenb@quicinc.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-12-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the 'response' member variable because no code reads its value.
Additionally, move the ufs_query_req and ufs_query_res data structure
definitions into include/ufs/ufshcd.h because these data structures are
related to the UFS host controller driver.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-11-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Unify the MCQ and legacy code paths. This patch reworks code introduced by
commit ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode").
Cc: "Bao D. Nguyen" <quic_nguyenb@quicinc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-10-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
No functionality is changed. This patch prepares for unifying the MCQ and
legacy code paths in this function.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-9-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Assign names to the enumeration types for UPIU types. Use these enumeration
types where appropriate.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use { } instead of { { 0 }, } to zero-initialize data structures on the
stack. This patch fixes two W=2 warnings.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch suppresses the following W=2 warning:
drivers/ufs/core/ufs-hwmon.c:130:49: warning: declaration of ‘_data’ shadows a global declaration [-Wshadow]
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the remaining kernel-doc warnings that are reported when building with
W=2.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch fixes multiple W=2 kernel-doc warnings.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use 'Return:' to document the return value instead of 'Returns' as required
by the kernel-doc documentation.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Qcom SoCs require scaling the interconnect paths for proper working of the
peripherals connected through interconnects. Even for accessing the UFS
controller, someone should setup the interconnect paths. So far, the
bootloaders used to setup the interconnect paths before booting Linux as
they need to access the UFS storage for things like fetching boot firmware.
But with the advent of multi boot options, bootloader nowadays like in
SA8540p SoC do not setup the interconnect paths at all.
So trying to configure UFS in the absence of the interconnect path
configuration results in a boot crash.
To fix this issue, and also to dynamically scale the interconnects (UFS-DDR
and CPU-UFS), interconnect API support is added to the Qcom UFS driver.
With this support, the interconnect paths are scaled dynamically based on
the gear configuration.
During the early stage of ufs_qcom_init(), ufs_qcom_icc_init() will setup
the paths to max bandwidth to allow configuring the UFS registers. Touching
the registers without configuring the icc paths would result in a crash.
However, we don't really need to set max vote for the icc paths as any
minimal vote would suffice. But the max value would allow initialization to
be done faster. After init, the bandwidth will get updated using
ufs_qcom_icc_update_bw() based on the gear and lane configuration.
The bandwidth values defined in ufs_qcom_bw_table struct are taken from
Qcom downstream vendor devicetree source and are calculated as per the
UFS3.1 Spec, Section 6.4.1, HS Gear Rates. So it is fixed across platforms.
Cc: Brian Masney <bmasney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230731145020.41262-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since there are enums available for UFS gears, let's add enums for lanes as
well to maintain uniformity.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230731145020.41262-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Only call scsi_set_resid() in case of an underflow. Do not call
scsi_set_resid() in case of an overflow.
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Fixes: cb38845d90fc ("scsi: ufs: core: Set the residual byte count")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230724200843.3376570-2-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A recent change removed the only user of a local variable that needs to now
also be removed:
drivers/ufs/host/ufs-qcom.c: In function 'ufs_qcom_mcq_esi_handler':
drivers/ufs/host/ufs-qcom.c:1652:31: error: unused variable 'host' [-Werror=unused-variable]
Fixes: 8f2b78652d05 ("scsi: ufs: qcom: Get queue ID from MSI index in ESI handler")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/llvm/64c00cd4.630a0220.6ad79.0eac@mx.google.com/
Link: https://lore.kernel.org/r/20230724122029.1430482-1-arnd@kernel.org
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Interest among UFS users in HPB has reduced significantly. I am not aware
of any current users of the HPB functionality. Hence remove HPB support
from the kernel.
A note: the work in JEDEC on a successor for HPB is nearing completion.
Zoned storage for UFS or ZUFS combines the UFS standard with ZBC-2.
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: ChanWoo Lee <cw9316.lee@samsung.com>
Cc: Daejun Park <daejun7.park@samsung.com>
Cc: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230719165758.2787573-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Devfreq uses the default DEVFREQ_TIMER_DEFERRABLE mode which uses the
deferred timer for scheduling the devfreq load monitor function. This
causes the load monitoring to be done only with non-idle CPUs and not
making use of the idle CPUs.
Hence, use the DEVFREQ_TIMER_DELAYED mode which uses the delayed timer
thereby making use of idle CPUs as well for load monitoring.
Co-developed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230720093446.30697-1-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus. As
part of that merge prepping Arm DT support 13 years ago, they "temporarily"
include each other. They also include platform_device.h and of.h. As a
result, there's a pretty much random mix of those include files used
throughout the tree. In order to detangle these headers and replace the
implicit includes with struct declarations, users need to explicitly
include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714175018.4064957-1-robh@kernel.org
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use colons to separate parameter names from their specific meanings to
silence the following warnings:
drivers/ufs/core/ufs-mcq.c:499: warning: Function parameter or member 'hba' not described in 'ufshcd_mcq_sq_cleanup'
drivers/ufs/core/ufs-mcq.c:499: warning: Function parameter or member 'task_tag' not described in 'ufshcd_mcq_sq_cleanup'
drivers/ufs/core/ufs-mcq.c:560: warning: Function parameter or member 'utrd' not described in 'ufshcd_mcq_nullify_sqe'
drivers/ufs/core/ufs-mcq.c:583: warning: Function parameter or member 'hba' not described in 'ufshcd_mcq_sqe_search'
drivers/ufs/core/ufs-mcq.c:583: warning: Function parameter or member 'hwq' not described in 'ufshcd_mcq_sqe_search'
drivers/ufs/core/ufs-mcq.c:583: warning: Function parameter or member 'task_tag' not described in 'ufshcd_mcq_sqe_search'
drivers/ufs/core/ufs-mcq.c:630: warning: Function parameter or member 'cmd' not described in 'ufshcd_mcq_abort'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5850
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230712075836.15375-1-yang.lee@linux.alibaba.com
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is no need to call the dev_err() function directly to print a custom
message when handling an error from either the platform_get_irq() or
platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.
./drivers/ufs/host/ufs-mediatek.c:864:3-10: line 864 is redundant because platform_get_irq() already prints an error
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5846
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230712064832.44188-1-yang.lee@linux.alibaba.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Lock the MSI descriptor storage of a device when configuring ESI.
Otherwise we would see warnings during boot.
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/1689065327-45039-1-git-send-email-quic_ziqichen@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
platform_msi_domain_alloc_irqs() does not always get consecutive IRQ
numbers, hence queue IDs calculated out from IRQ numbers may be incorrect
if we assume IRQ numbers are consecutive. Fix this by passing msi_desc to
ESI handler to use msi_desc->msi_index as queue ID.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/1689062349-77385-1-git-send-email-quic_ziqichen@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When TI UFS host controller driver is built as kernel module it is not
getting auto-loaded due to missing aliases in modules.
Add device tree related aliases.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230710094801.183149-1-u-kumar1@ti.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add UFS MCQ vops and IRQ handler for MediaTek platform. PM flow is fixed
accordingly.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Link: https://lore.kernel.org/r/20230701124442.10489-3-powen.kao@mediatek.com
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Export symbols for MediaTek UFS driver's PM flow and IRQ handler.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Link: https://lore.kernel.org/r/20230701124442.10489-2-powen.kao@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This change reduces the number of parentheses that are required in the
definition of this function and also when using this function.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230706215054.4113469-1-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in the currently staged SCSI fixes for 6.5.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull more SCSI updates from James Bottomley:
"A few late arriving patches that missed the initial pull request. It's
mostly bug fixes (the dt-bindings is a fix for the initial pull)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove unused function declaration
scsi: target: docs: Remove tcm_mod_builder.py
scsi: target: iblock: Quiet bool conversion warning with pr_preempt use
scsi: dt-bindings: ufs: qcom: Fix ICE phandle
scsi: core: Simplify scsi_cdl_check_cmd()
scsi: isci: Fix comment typo
scsi: smartpqi: Replace one-element arrays with flexible-array members
scsi: target: tcmu: Replace strlcpy() with strscpy()
scsi: ncr53c8xx: Replace strlcpy() with strscpy()
scsi: lpfc: Fix lpfc_name struct packing
|
|
The new qTimestamp attribute was added to UFS 4.0 spec, in order to
synchronize timestamp between device logs and the host. The spec recommends
to send this attribute upon device power-on Reset/HW reset or when
switching to Active state (using SSU command). Due to this attribute, the
attribute's max value was extended to 8 bytes. As a result, the new
definition of struct utp_upiu_query_v4_0 was added.
Signed-off-by: Arthur Simchaev <Arthur.Simchaev@wdc.com>
-----------------
Changes to v2:
- Adressed Bart's comments
- Add missed response variable to ufshcd_set_timestamp_attr
Link: https://lore.kernel.org/r/20230626103320.8737-1-arthur.simchaev@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When RESET_CONTROLLER is not set, kconfig complains about missing
dependencies for RESET_TI_SYSCON, so add the missing dependency just as is
done above for SCSI_UFS_QCOM.
Silences this kconfig warning:
WARNING: unmet direct dependencies detected for RESET_TI_SYSCON
Depends on [n]: RESET_CONTROLLER [=n] && HAS_IOMEM [=y]
Selected by [m]:
- SCSI_UFS_MEDIATEK [=m] && SCSI_UFSHCD [=y] && SCSI_UFSHCD_PLATFORM [=y] && ARCH_MEDIATEK [=y]
Fixes: de48898d0cb6 ("scsi: ufs-mediatek: Create reset control device_link")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: lore.kernel.org/r/202306020859.1wHg9AaT-lkp@intel.com
Link: https://lore.kernel.org/r/20230701052348.28046-1-rdunlap@infradead.org
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Peter Wang <peter.wang@mediatek.com>
Cc: Paul Gazzillo <paul@pgazz.com>
Cc: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
|
|
Commit 2468da61ea09 ("scsi: ufs: core: mcq: Configure operation and runtime
interface") added ufshcd_mcq_select_mcq_mode(), but it's not used
anywhere. So remove it.
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Link: https://lore.kernel.org/r/20230627012931epcms2p76f458e0b2ce8a591b56bbcc6a2f1a3bb@epcms2p7
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add PCI ID to support Intel Arrow Lake, same as MTL (Intel Meteor Lake).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230613170327.61186-1-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
