| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the
lockup detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to
retrieve the delta to the snapshot. Use this new mechanism in the
watchdog code to do a two stage lockup analysis by taking the
snapshot and printing the deltas for the topmost active interrupts
on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the
global counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that
they are not delivered before the system resumes the device drivers
when coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU
are migrated to a different CPU in the affinity mask. This can fail
when the CPUs have no vectors left. Instead of giving up try to
migrate it to any online CPU and thereby breaking the affinity
setting in order to prevent a stale device interrupt which targets
an offline CPU
- The usual small cleanups
Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place"
* tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc
cpuidle: Avoid explicit cpumask allocation on stack
irqchip/sifive-plic: Avoid explicit cpumask allocation on stack
irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack
irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack
irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack
irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack
cpumask: Introduce cpumask_first_and_and()
irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown
genirq: Reuse irq_is_nmi()
genirq/cpuhotplug: Retry with cpu_online_mask when migration fails
genirq/cpuhotplug: Skip suspended interrupts when restoring affinity
arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251
arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251
ARM: dts: stm32: List exti parent interrupts on stm32mp131
ARM: dts: stm32: List exti parent interrupts on stm32mp151
arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32
irqchip/stm32-exti: Mark events reserved with RIF configuration check
irqchip/stm32-exti: Skip secure events
irqchip/stm32-exti: Convert driver to standard PM
...
|
|
This BUG_ON() is useless, because the same effect will be obtained
by letting the code run its course and vm being dereferenced,
triggering an exception.
So just remove this check.
Signed-off-by: Guanrui Huang <guanrui.huang@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240418061053.96803-3-guanrui.huang@linux.alibaba.com
|
|
The error handling path in its_vpe_irq_domain_alloc() causes a double free
when its_vpe_init() fails after successfully allocating at least one
interrupt. This happens because its_vpe_irq_domain_free() frees the
interrupts along with the area bitmap and the vprop_page and
its_vpe_irq_domain_alloc() subsequently frees the area bitmap and the
vprop_page again.
Fix this by unconditionally invoking its_vpe_irq_domain_free() which
handles all cases correctly and by removing the bitmap/vprop_page freeing
from its_vpe_irq_domain_alloc().
[ tglx: Massaged change log ]
Fixes: 7d75bbb4bc1a ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown")
Signed-off-by: Guanrui Huang <guanrui.huang@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240418061053.96803-2-guanrui.huang@linux.alibaba.com
|
|
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_first_and_and() to avoid the need for a temporary cpumask on
the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240416085454.3547175-7-dawei.li@shingroup.cn
|
|
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_first_and_and() to avoid the need for a temporary cpumask on
the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240416085454.3547175-6-dawei.li@shingroup.cn
|
|
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_first_and_and() to avoid the need for a temporary cpumask on
the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20240416085454.3547175-5-dawei.li@shingroup.cn
|
|
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Remove cpumask var on stack and use cpumask_any_and() to address it.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240416085454.3547175-4-dawei.li@shingroup.cn
|
|
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_first_and_and() to avoid the need for a temporary cpumask on
the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416085454.3547175-3-dawei.li@shingroup.cn
|
|
The interrupt controller shutdown path does not need to save the mask of
enabled interrupts because the next state the system is going to be in is
akin to a cold boot, or a kexec'd kernel. Saving the mask only makes sense
if the software state needs to preserve the hardware state across a system
suspend/resume cycle.
As an optimization, and given that there are systems with dozens of such
interrupt controller, save a "slow" memory mapped I/O read in the shutdown
path where no saving/restoring is required.
Reported-by: Tim Ross <tim.ross@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240424175732.1526531-1-florian.fainelli@broadcom.com
|
|
EXTI events availability depends on Resource Isolation Framework (RIF)
configuration.
RIF grants access to buses with Compartment ID (CID) filtering, secure and
privilege level. It also assigns EXTI events to one or several processors
(CID, Secure, Privilege).
EXTI events used by Linux must be CID-filtered (EnCIDCFGR.CFEN=1) and
statically assigned to CID1 (EnCIDCFR.CID=CID1).
EXTI events not filling these conditions are marked as reserved and can't
be used by Linux.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240415134926.1254428-7-antonio.borneo@foss.st.com
|
|
Secure OS can reserve some EXTI events, marking them as "secure" by setting
the corresponding bit in register SECCFGR (aka TZENR). These events cannot
be used by Linux.
Read the list of reserved events and check it during interrupt domain
allocation.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240415134926.1254428-6-antonio.borneo@foss.st.com
|
|
All driver's dependencies for suspend/resume have been fixed long
ago. There are no more reasons to use syscore PM for the part of this
driver related to Cortex-A MPU.
Switch to standard PM using NOIRQ_SYSTEM_SLEEP_PM_OPS, so all the registers
of the interrupt controller get resumed before any irq gets enabled.
A side effect of this change is to drop the only global variable
'stm32_host_data', used to keep the driver's data for syscore_ops. This
makes the driver ready to support multiple EXTI instances.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240415134926.1254428-5-antonio.borneo@foss.st.com
|
|
The mapping of EXTI events to its parent interrupt controller is both SoC
and instance dependent.
The current implementation requires adding a new mapping table to the
driver's code and a new compatible for each new EXTI instance.
Check for the presence of the optional interrupts-extended property and use
it to map EXTI events to the parent's interrupts.
For old device trees without the optional interrupts-extended property, the
driver's behavior is unchanged, thus keeps backward compatibility.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240415134926.1254428-4-antonio.borneo@foss.st.com
|
|
Commit 046a6ee2343b ("irqchip: Bulk conversion to
generic_handle_domain_irq()") incorrectly added a leading space character
in the line indentation.
Use only TAB for indentation, removing the leading space.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240415134926.1254428-2-antonio.borneo@foss.st.com
|
|
After commit 5bb578a0c1b8 ("ARM: 9298/1: Drop custom mdesc->handle_irq()")
the function icoll_handle_irq() is only used within irq-mxs.c. So declare
it as static to fix the warning about a missing prototype when building
with W=1.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The current code is using a fixed mapping between the LS7A interrupt source
and the HT interrupt vector. This prevents the utilization of the full
interrupt vector space and therefore limits the number of interrupt source
in a system.
Replace the fixed mapping with a dynamic mapping which allocates a
vector when an interrupt source is set up. This avoids that unused
sources prevent vectors from being used for other devices.
Introduce a mapping table in struct pch_pic, where each interrupt source
will allocate an index as a 'hwirq' number from the table in the order of
application and set table value as interrupt source number. This hwirq
number will be configured as vector in the HT interrupt controller. For an
interrupt source, the validity period of the obtained hwirq will last until
the system reset.
Co-developed-by: Biao Dong <dongbiao@loongson.cn>
Signed-off-by: Biao Dong <dongbiao@loongson.cn>
Co-developed-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240422093830.27212-1-zhangtianyang@loongson.cn
|
|
Currently, the following warning is observed on the QEMU virt machine:
genirq: irq_chip APLIC-MSI-d000000.aplic did not update eff. affinity mask of irq 12
The above warning is because the IMSIC driver does not set the initial
value of effective affinity in the interrupt descriptor. To address this,
initialize the effective affinity in imsic_irq_domain_alloc().
Fixes: 027e125acdba ("irqchip/riscv-imsic: Add device MSI domain support for platform devices")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240413065210.315896-1-apatel@ventanamicro.com
|
|
As per the GICv4.1 spec (Arm IHI 0069H, 5.3.19):
"A VMAPP with {V, Alloc}=={0, x} is self-synchronizing, This means the ITS
command queue does not show the command as consumed until all of its
effects are completed."
Furthermore, VSYNC is allowed to deliver an SError when referencing a
non existent VPE.
By these definitions, a VMAPP followed by a VSYNC is a bug, as the
later references a VPE that has been unmapped by the former.
Fix it by eliding the VSYNC in this scenario.
Fixes: 64edfaa9a234 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP")
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240406022737.3898763-1-tangnianyao@huawei.com
|
|
IRQ_LOONGARCH_CPU
An interrupt's effective affinity can only be different from its configured
affinity if there are multiple CPUs. Make it clear that this option is only
meaningful when SMP is enabled. Otherwise, there exists "WARNING: unmet
direct dependencies detected for GENERIC_IRQ_EFFECTIVE_AFF_MASK" when make
menuconfig if CONFIG_SMP is not set on LoongArch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240326121130.16622-3-yangtiezhu@loongson.cn
|
|
According to the code comment of "struct irq_chip", the member
"irq_set_affinity" is to set the CPU affinity on SMP machines, so define
and call eiointc_set_irq_affinity() only under CONFIG_SMP.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240326121130.16622-4-yangtiezhu@loongson.cn
|
|
When pch_msi_parent_domain_alloc() returns an error, there is an off-by-one
in the number of interrupts to be freed.
Fix it by passing the number of successfully allocated interrupts, instead of the
relative index of the last allocated one.
Fixes: 632dcc2c75ef ("irqchip: Add Loongson PCH MSI controller")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/r/20240327142334.1098-1-yuzenghui@huawei.com
|
|
When alpine_msix_gic_domain_alloc() fails, there is an off-by-one in the
number of interrupts to be freed.
Fix it by passing the number of successfully allocated interrupts, instead
of the relative index of the last allocated one.
Fixes: 3841245e8498 ("irqchip/alpine-msi: Fix freeing of interrupts on allocation error path")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240327142305.1048-1-yuzenghui@huawei.com
|
|
There is a spelling mistake in a dev_info message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240327110516.283738-1-colin.i.king@gmail.com
|
|
armada_370_xp_msi_reenable_percpu() is only defined when CONFIG_PCI_MSI is
enabled, and only called when SMP is enabled.
Without CONFIG_SMP, there are no callers, which results in a build time
warning instead:
drivers/irqchip/irq-armada-370-xp.c:319:13: error: 'armada_370_xp_msi_reenable_percpu' defined but not used [-Werror=unused-function]
319 | static void armada_370_xp_msi_reenable_percpu(void) {}
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark the function as __maybe_unused to avoid adding more complexity
to the #ifdefs.
Fixes: 8ca61cde32c1 ("irqchip/armada-370-xp: Enable MSI affinity configuration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240322125838.901649-1-arnd@kernel.org
|
|
Since commit 021a8ca2ba23 ("genirq/generic-chip: Fix the irq_chip name for
/proc/interrupts"), the chip name of all chip types are set to the same
name by irq_init_generic_chip() now. So the initialization to the same
irq_chip name are no longer needed. Drop them.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240311115344.72567-1-keguang.zhang@gmail.com
|
|
The RISC-V advanced platform-level interrupt controller (APLIC) has
two modes of operation: 1) Direct mode and 2) MSI mode.
(For more details, refer https://github.com/riscv/riscv-aia)
In APLIC MSI-mode, wired interrupts are forwared as message signaled
interrupts (MSIs) to CPUs via IMSIC.
Extend the existing APLIC irqchip driver to support MSI-mode for
RISC-V platforms having both wired interrupts and MSIs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240307140307.646078-8-apatel@ventanamicro.com
|
|
The RISC-V advanced interrupt architecture (AIA) specification defines
advanced platform-level interrupt controller (APLIC) which has two modes
of operation: 1) Direct mode and 2) MSI mode.
(For more details, refer https://github.com/riscv/riscv-aia)
In APLIC direct-mode, wired interrupts are forwared to CPUs (or HARTs)
as a local external interrupt.
Add a platform irqchip driver for the RISC-V APLIC direct-mode to
support RISC-V platforms having only wired interrupts.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240307140307.646078-7-apatel@ventanamicro.com
|
|
The Linux PCI framework supports per-device MSI domains for PCI devices
so extend the IMSIC driver to allow PCI per-device MSI domains.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240307140307.646078-5-apatel@ventanamicro.com
|
|
The Linux platform MSI support allows per-device MSI domains so add
a platform irqchip driver for RISC-V IMSIC which provides a base IRQ
domain with MSI parent support for platform device domains.
The IMSIC platform driver assumes that the IMSIC state is already
initialized by the IMSIC early driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240307140307.646078-4-apatel@ventanamicro.com
|
|
The RISC-V advanced interrupt architecture (AIA) specification
defines a new MSI controller called incoming message signalled
interrupt controller (IMSIC) which manages MSI on per-HART (or
per-CPU) basis. It also supports IPIs as software injected MSIs.
(For more details refer https://github.com/riscv/riscv-aia)
Add an early irqchip driver for RISC-V IMSIC which sets up the
IMSIC state and provide IPIs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240307140307.646078-3-apatel@ventanamicro.com
|
|
Simplify rzg2l_irqc_irq_{en,dis}able() by moving common code to
rzg2l_tint_irq_endisable().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
As per the hardware team, TIEN and TINT source should not set at the same
time due to a possible hardware race leading to spurious IRQ.
Currently on some scenarios hardware settings for TINT detection is not in
sync with TINT source as the enable/disable overrides source setting value
leading to hardware inconsistent state. For eg: consider the case GPIOINT0
is used as TINT interrupt and configuring GPIOINT5 as edge type. During
rzg2l_irq_set_type(), TINT source for GPIOINT5 is set. On disable(),
clearing of the entire bytes of TINT source selection for GPIOINT5 is same
as GPIOINT0 with TIEN disabled. Apart from this during enable(), the
setting of GPIOINT5 with TIEN results in spurious IRQ as due to a HW race,
it is possible that IP can use the TIEN with previous source value
(GPIOINT0).
So, just update TIEN during enable/disable as TINT source is already set
during rzg2l_irq_set_type(). This will make the consistent hardware
settings for detection method tied with TINT source and allows to simplify
the code.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
RZ/G2L interrupt chips require that the interrupt is masked before changing
the NMI, IRQ, TINT interrupt settings. Aside of that, after setting an edge
trigger type it is required to clear the interrupt status register in order
to avoid spurious interrupts.
The current implementation fails to do either of that and therefore is
prone to generate spurious interrupts when setting the trigger type.
Address this by:
- Ensuring that the interrupt is masked at the chip level across the
update for the TINT chip
- Clearing the interrupt status register after updating the trigger mode
for edge type interrupts
[ tglx: Massaged changelog and reverted the spin_lock_irqsave() change as
the set_type() callback is always called with interrupts disabled. ]
Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Rename rzg2l_irq_eoi()->rzg2l_clear_irq_int() and simplify the code by
removing redundant priv local variable.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Rename rzg2l_tint_eoi()->rzg2l_clear_tint_int() and simplify the code by
removing redundant priv and hw_irq local variables.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The irq_eoi() callback of the RZ/G2L interrupt chip clears the relevant
interrupt cause bit in the TSCR register by writing to it.
This write is not sufficient because the write is posted and therefore not
guaranteed to immediately clear the bit. Due to that delay the CPU can
raise the just handled interrupt again.
Prevent this by reading the register back which causes the posted write to
be flushed to the hardware before the read completes.
Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
riscv_intc_custom_base is initialized to BITS_PER_LONG, so the second
check passes even though AIA provides 64 interrupts. Adjust the condition to
only check the custom range for interrupts outside the standard range, and
adjust the standard range when AIA is available.
Fixes: 3c46fc5b5507 ("irqchip/riscv-intc: Add support for RISC-V AIA")
Fixes: 678c607ecf8a ("irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240312212813.2323841-1-samuel.holland@sifive.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Make affinity changes take effect immediately for interrupt
threads. This reduces the impact on isolated CPUs as it pulls over
the thread right away instead of doing it after the next hardware
interrupt arrived.
- Cleanup and improvements for the interrupt chip simulator
- Deduplication of the interrupt descriptor initialization code so
the sparse and non-sparse mode share more code.
Drivers:
- A set of conversions to platform_drivers::remove_new() which gets
rid of the pointless return value.
- A new driver for the Starfive JH8100 SoC
- Support for Amlogic-T7 SoCs
- Improvement for the interrupt handling and EOI management for the
loongson interrupt controller.
- The usual fixes and improvements all over the place"
* tag 'irq-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
irqchip/ts4800: Convert to platform_driver::remove_new() callback
irqchip/stm32-exti: Convert to platform_driver::remove_new() callback
irqchip/renesas-rza1: Convert to platform_driver::remove_new() callback
irqchip/renesas-irqc: Convert to platform_driver::remove_new() callback
irqchip/renesas-intc-irqpin: Convert to platform_driver::remove_new() callback
irqchip/pruss-intc: Convert to platform_driver::remove_new() callback
irqchip/mvebu-pic: Convert to platform_driver::remove_new() callback
irqchip/madera: Convert to platform_driver::remove_new() callback
irqchip/ls-scfg-msi: Convert to platform_driver::remove_new() callback
irqchip/keystone: Convert to platform_driver::remove_new() callback
irqchip/imx-irqsteer: Convert to platform_driver::remove_new() callback
irqchip/imx-intmux: Convert to platform_driver::remove_new() callback
irqchip/imgpdc: Convert to platform_driver::remove_new() callback
irqchip: Add StarFive external interrupt controller
dt-bindings: interrupt-controller: Add starfive,jh8100-intc
arm64: dts: Add gpio_intc node for Amlogic-T7 SoCs
irqchip/meson-gpio: Add support for Amlogic-T7 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic-T7 SoCs
irqchip/vic: Fix a kernel-doc warning
genirq: Wake interrupt threads immediately when changing affinity
...
|
|
Use riscv_intc_aia_irq() as the low-level interrupt handler instead of the
existing riscv_intc_irq() default handler to make demultiplexing work
correctly.
Also print "using AIA" in the INTC boot banner when AIA is available.
Fixes: 3c46fc5b5507 ("irqchip/riscv-intc: Add support for RISC-V AIA")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240226040746.1396416-2-apatel@ventanamicro.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/0bdce86b50e5aa50cffbc4add332cbfbad87521e.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/r/ac551b89025bafadce05102b94596f8cd3564a32.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1a80e31525d0b02063d2ff1baaaa5e87418f54b6.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/2d367ab738ed2e4cf58cffc10d64b0cbe8a1322c.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/6dc03cf63382d24f954c167aaa988f8e31d6b89d.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/071057cfdc0bc52c574f74156b410c0337adb69c.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/df977ad4c02ff913b01cdd6c348e7fae3e08e651.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/64c2f79760c53f29651e7126418c407ff699317d.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1e7143ca68ff0715e0f954504e750fc92e8c6d80.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/4c852a3359aa06bedcf3a10f3fd8c1e008cc5a3a.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/c0e5afe62256860150d25bcf644f2b8d62794c86.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/edeee074956dd943d3c67da894a01dc5f0d33bd7.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/472fc6f6bcd54b73f8af206d079a80cb8744d0ca.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
Add StarFive external interrupt controller for JH8100 SoC.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20240226055025.1669223-3-changhuang.liang@starfivetech.com
|
|
The RISC-V advanced interrupt architecture (AIA) extends the per-HART
local interrupts in following ways:
1. Minimum 64 local interrupts for both RV32 and RV64
2. Ability to process multiple pending local interrupts in same
interrupt handler
3. Priority configuration for each local interrupts
4. Special CSRs to configure/access the per-HART MSI controller
Add support for #1 and #2 described above in the RISC-V intc driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-9-apatel@ventanamicro.com
|
|
Now that PLIC driver is probed as a regular platform driver, the lock
dependency validator complains about the safety of handler->enable_lock
usage:
[ 0.956775] Possible interrupt unsafe locking scenario:
[ 0.956998] CPU0 CPU1
[ 0.957247] ---- ----
[ 0.957439] lock(&handler->enable_lock);
[ 0.957607] local_irq_disable();
[ 0.957793] lock(&irq_desc_lock_class);
[ 0.958021] lock(&handler->enable_lock);
[ 0.958246] <Interrupt>
[ 0.958342] lock(&irq_desc_lock_class);
[ 0.958501]
*** DEADLOCK ***
To address above, use raw_spin_lock_irqsave/unlock_irqrestore() instead
of raw_spin_lock/unlock().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-8-apatel@ventanamicro.com
|
|
plic_probe()
The SiFive PLIC driver needs to know the number of interrupts and contexts
to complete initialization. Parse these details early in plic_probe() to
avoid unnecessary memory allocations and register mappings if these details
are not available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-7-apatel@ventanamicro.com
|
|
The SiFive PLIC contexts should not be left dangling if irqdomain creation
fails because plic_starting_cpu() can crash accessing unmapped registers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-6-apatel@ventanamicro.com
|
|
The RISC-V INTC irqdomain is always the parent irqdomain of SiFive PLIC
so use riscv_get_intc_hwnode() to get the parent fwnode similar to other
RISC-V drivers which use local interrupts.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-5-apatel@ventanamicro.com
|
|
Use devm_xyz() for allocations and mappings managed by the
Linux device driver framework.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-4-apatel@ventanamicro.com
|
|
Use dev_info(), dev_warn(), and dev_err() in-place of pr_info(),
pr_warn(), and pr_err().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-3-apatel@ventanamicro.com
|
|
The PLIC driver does not require very early initialization so convert
it into a platform driver.
After conversion, the PLIC driver is probed after CPUs are brought-up
so setup cpuhp state after context handler of all online CPUs are
initialized otherwise PLIC driver crashes for platforms with multiple
PLIC instances.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-2-apatel@ventanamicro.com
|
|
Pick up RISCV INTC changes to handle conflicts with the AIA updates.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Add support for the Andes hart-level interrupt controller. This
controller provides interrupt mask/unmask functions to access the
custom register (SLIE) where the non-standard S-mode local interrupt
enable bits are located. The base of custom interrupt number is set
to 256.
To share the riscv_intc_domain_map() with the generic RISC-V INTC and
ACPI, add a chip parameter to riscv_intc_init_common(), so it can be
passed to the irq_domain_set_info() as a private data.
Andes hart-level interrupt controller requires the "andestech,cpu-intc"
compatible string to be present in interrupt-controller of cpu node to
enable the use of custom local interrupt source.
e.g.,
cpu0: cpu@0 {
compatible = "andestech,ax45mp", "riscv";
...
cpu0-intc: interrupt-controller {
#interrupt-cells = <0x01>;
compatible = "andestech,cpu-intc", "riscv,cpu-intc";
interrupt-controller;
};
};
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Randolph <randolph@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240222083946.3977135-4-peterlin@andestech.com
|
|
Currently, the implementation of the RISC-V INTC driver uses the
interrupt cause as the hardware interrupt number, with a maximum of
64 interrupts. However, the platform can expand the interrupt number
further for custom local interrupts.
To fully utilize the available local interrupt sources, switch
to using irq_domain_create_tree() that creates the radix tree
map, add global variables (riscv_intc_nr_irqs, riscv_intc_custom_base
and riscv_intc_custom_nr_irqs) to determine the valid range of local
interrupt number (hwirq).
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Randolph <randolph@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-3-peterlin@andestech.com
|
|
The Amlogic-T7 SoCs support 12 GPIO IRQ lines compared with previous
serial chips and have something different, details are as below.
IRQ Number:
- 156 1 pin on bank TESTN
- 155:148 8 pins on bank H
- 147:129 19 pins on bank Y
- 128:115 14 pins on bank M
- 114:91 24 pins on bank T
- 90:77 14 pins on bank Z
- 76:70 7 pins on bank E
- 69:57 13 pins on bank D
- 56:40 17 pins on bank W
- 39:20 20 pins on bank X
- 19:13 7 pins on bank C
- 12:0 13 pins on bank B
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240222074640.1866284-3-huqiang.qin@amlogic.com
|
|
The GIC/ITS code is designed to ensure to pick up any preallocated LPI
tables on the redistributors, as enabling LPIs is a one-way switch. There
is no such restriction for vLPIs, and for GICv4.1 it is expected to
allocate a new vPE table at boot.
This works as intended when initializing an ITS, however when setting up a
redistributor in cpu_init_lpis() the early return for preallocated RD
tables skips straight past the GICv4 setup. This all comes to a head when
trying to kexec() into a new kernel, as the new kernel silently fails to
set up GICv4, leading to a complete loss of SGIs and LPIs for KVM VMs.
Slap a band-aid on the problem by ensuring its_cpu_init_lpis() always
initializes GICv4 on the way out, even if the other RD tables were
preallocated.
Fixes: 6479450f72c1 ("irqchip/gic-v4: Fix occasional VLPI drop")
Reported-by: George Cherian <gcherian@marvell.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240219185809.286724-2-oliver.upton@linux.dev
|
|
bus_get_dev_root() returns sp->dev_root which is set in subsys_register(),
but subsys_register() is not called by platform_bus_init().
Therefor for the platform_bus_type, bus_get_dev_root() always returns NULL.
This makes mbigen_of_create_domain() always return -ENODEV.
Don't try to retrieve the parent via bus_get_dev_root() and
unconditionally hand a NULL pointer to of_platform_device_create() to
fix this.
Fixes: fea087fc291b ("irqchip/mbigen: move to use bus_get_dev_root()")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240220111429.110666-1-chenjun102@huawei.com
|
|
Drop one extraneous struct member to quieten a warning:
drivers/irqchip/irq-vic.c:73: warning: Excess struct member 'parent_irq' description in 'vic_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240221064104.7863-1-rdunlap@infradead.org
|
|
The removal of the paremeter count restriction in the core code to allow
pure domain token based select() decisions broke the IMX intmux select
callback as that unconditioally expects that there is a parameter.
Add the missing check for zero parameter count and the token match.
Fixes: de1ff306dcf4 ("genirq/irqdomain: Remove the param count restriction from select()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87ttm3ikok.ffs@tglx
|
|
RISC-V PLIC cannot "end-of-interrupt" (EOI) disabled interrupts, as
explained in the description of Interrupt Completion in the PLIC spec:
"The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored."
Commit 69ea463021be ("irqchip/sifive-plic: Fixup EOI failed when masked")
ensured that EOI is successful by enabling interrupt first, before EOI.
Commit a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask
operations") removed the interrupt enabling code from the previous
commit, because it assumes that interrupt should already be enabled at the
point of EOI.
However, this is incorrect: there is a window after a hart claiming an
interrupt and before irq_desc->lock getting acquired, interrupt can be
disabled during this window. Thus, EOI can be invoked while the interrupt
is disabled, effectively nullify this EOI. This results in the interrupt
never gets asserted again, and the device who uses this interrupt appears
frozen.
Make sure that interrupt is really enabled before EOI.
Fixes: a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240131081933.144512-1-namcao@linutronix.de
|
|
Currently the irqdomain select callback is only invoked when the parameter
count of the fwspec arguments is not zero. That makes sense because then
the match is on the firmware node and eventually on the bus_token, which is
already handled in the core code.
The upcoming support for per device MSI domains requires to do real bus
token specific checks in the MSI parent domains with a zero parameter
count.
Make the gic-v3 select() callback handle that case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240127161753.114685-2-apatel@ventanamicro.com
|
|
When updating the affinity of a VPE, the VMOVP command is currently skipped
if the two CPUs are part of the same VPE affinity.
But this is wrong, as the doorbell corresponding to this VPE is still
delivered on the 'old' CPU, which screws up the balancing. Furthermore,
offlining that 'old' CPU results in doorbell interrupts generated for this
VPE being discarded.
The harsh reality is that VMOVP cannot be elided when a set_affinity()
request occurs. It needs to be obeyed, and if an optimisation is to be
made, it is at the point where the affinity change request is made (such as
in KVM).
Drop the VMOVP elision altogether, and only use the vpe_table_mask
to try and stay within the same ITS affinity group if at all possible.
Fixes: dd3f050a216e (irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP)
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240213101206.2137483-4-maz@kernel.org
|
|
While refactoring the way the ITSs are probed, the handling of quirks
applicable to ACPI-based platforms was lost. As a result, systems such as
HIP07 lose their GICv4 functionnality, and some other may even fail to
boot, unless they are configured to boot with DT.
Move the enabling of quirks into its_probe_one(), making it common to all
firmware implementations.
Fixes: 9585a495ac93 ("irqchip/gic-v3-its: Split allocation from initialisation of its_node")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240213101206.2137483-3-maz@kernel.org
|
|
Although the GICv3 code base has gained some handling of systems failing to
handle the shareability attributes, the GICv4 side of things has been
firmly ignored.
This is unfortunate, as the new recent addition of the "dma-noncoherent" is
supposed to apply to all of the GICR tables, and not just the ones that are
common to v3 and v4.
Add some checks to handle the VPROPBASE/VPENDBASE shareability and
cacheability attributes in the same way we deal with the other GICR_BASE
registers, wrapping the flag check in a helper for improved readability.
Note that this has been found by inspection only, as I don't have access to
HW that suffers from this particular issue.
Fixes: 3a0fff0fb6a3 ("irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20240213101206.2137483-2-maz@kernel.org
|
|
ida_alloc() and ida_free() should be used instead of the deprecated
ida_simple_get() and ida_simple_remove().
The upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. Adjust the code accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/3b472b0e7edf6e483b8b255cf8d1cb0163532adf.1705222332.git.christophe.jaillet@wanadoo.fr
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows.
The cpu variable is a pointer to "struct bcm7038_l1_cpu" and this structure
ends in a flexible array:
struct bcm7038_l1_cpu {
void __iomem *map_base;
u32 mask_cache[];
};
The preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the argument "size + count * size" in the
kzalloc() function.
This way, the code is more readable and more safer.
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240209183128.10273-1-erick.archer@gmx.com
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162 [2]
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows.
The cpu variable is a pointer to "struct bcm6345_l1_cpu" and this structure
ends in a flexible array:
struct bcm6345_l1_cpu {
[...]
u32 enable_cache[];
};
The preferred way in the kernel is to use the struct_size() helper to do
the arithmetic instead of the argument "size + count * size" in the
kzalloc() function.
This way, the code is more readable and safer.
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240209181600.9472-1-erick.archer@gmx.com
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162 [2]
|
|
During suspend all CPUs except CPU0 are hot-unpluged and all active
interrupts are migrated to CPU0.
On resume eiointc_router_init() affines all interrupts to CPU0, so the
subsequent explicit interrupt affinity restore is redundant.
Remove it.
[ tglx: Rewrote changelog ]
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240130082722.2912576-4-maobibo@loongson.cn
|
|
eiointc_irq_dispatch() iterates over the pending bit registers of the
interrupt controller and evaluates the result even if there is no interrupt
pending in a particular 64bit chunk.
Skip handling and especially the pointless write back for clearing the
non-pending bits if a chunk is empty.
[ tglx: Massaged changelog ]
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20240130082722.2912576-3-maobibo@loongson.cn
|
|
devm_ioremap() doesn't return error pointers, it returns NULL on error.
Update the check accordingly.
Fixes: 221b110d87c2 ("irqchip/qcom-mpm: Support passing a slice of SRAM as reg space")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/22e1f4de-edce-4791-bd2d-2b2e98529492@moroto.mountain
|
|
eiointc_domain_alloc() uses struct eiointc, which is not defined, for a
pointer. Older compilers treat that as a forward declaration and due to
assignment of a void pointer there is no warning emitted. As the variable
is then handed in as a void pointer argument to irq_domain_set_info() the
code is functional.
Use struct eiointc_priv instead.
[ tglx: Rewrote changelog ]
Fixes: dd281e1a1a93 ("irqchip: Add Loongson Extended I/O interrupt controller support")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20240130082722.2912576-2-maobibo@loongson.cn
|
|
It was observed on Broadcom devices that use GIC v3 architecture L1
interrupt controllers as the parent of brcmstb-l2 interrupt controllers
that the deactivation of the parent interrupt could happen before the
brcmstb-l2 deasserted its output. This would lead the GIC to reactivate the
interrupt only to find that no L2 interrupt was pending. The result was a
spurious interrupt invoking handle_bad_irq() with its associated
messaging. While this did not create a functional problem it is a waste of
cycles.
The hazard exists because the memory mapped bus writes to the brcmstb-l2
registers are buffered and the GIC v3 architecture uses a very efficient
system register write to deactivate the interrupt.
Add a write memory barrier prior to invoking chained_irq_exit() to
introduce a dsb(st) on those systems to ensure the system register write
cannot be executed until the memory mapped writes are visible to the
system.
[ florian: Added Fixes tag ]
Fixes: 7f646e92766e ("irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240210012449.3009125-1-florian.fainelli@broadcom.com
|
|
GIC & GIC-v3 share same gic_irq() implementations, both of which serve
exact same purpose as irqd_to_hwirq(). irqd_to_hwirq() is a generic and
top level API of the interrupt subsystem, it's independent of any chip
implementation.
Replace gic_irq() with irqd_to_hwirq() and convert struct irq_data::hwirq
to irq_hw_number_t explicitly.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240122085716.2999875-3-dawei.li@shingroup.cn
|
|
Replace the open coded register polling loop with
readl_relaxed_poll_timeout_atomic() which provides the same functionality.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240122085716.2999875-2-dawei.li@shingroup.cn
|
|
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is needed for killing the sched.h dependency on rcupdate.h, and
pid.h is a better place for this code anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- get rid of the cached_irq_mask variable
- use BIT() macro instead of bit shifts
- drop .disable and .enable as they are equivalent to the default
implementations
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231208163857.82644-1-jcmvbkbc@gmail.com
|
|
The MPM hardware is accessible from the ARM CPUs through a shared memory
region (RPM MSG RAM) which is also concurrently accessed by other kinds of
cores on the system like modem, ADSP etc.
Modeling this relation in a (somewhat) sane manner in the device tree
requires to
- either present the MPM as a child of said memory region, which
makes little sense, as a mapped memory carveout is not a bus.
- define nodes which bleed their register spaces into one another
- or passing their slice of the MSG RAM through a property
Go with the third option and add a way to map a region passed through the
"qcom,rpm-msg-ram" property as register space for the MPM interrupt
controller.
The current way of using 'reg' is preserved for backwards compatibility
reasons.
[ tglx: Massaged changelog ]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20230328-topic-msgram_mpm-v7-2-6ee2bfeaac2c@linaro.org
|
|
The irqchip-renesas-rzg2l driver is used on RZ/G3S SoC. RZ/G3S can go into
deep sleep states where power to different SoC's parts is cut off and RAM
is switched to self-refresh. The resume from these states is done with the
help of the bootloader.
The IA55 IRQ controller needs to be reconfigured when resuming from deep
sleep state. For this the IA55 registers are cached in suspend and restored
in resume.
The IA55 IRQ controller is connected to GPIO controller and GIC as follows:
┌──────────┐ ┌──────────┐
│ │ SPIX │ │
│ ├─────────►│ │
│ │ │ │
│ │ │ │
┌────────┐IRQ0-7 │ IA55 │ │ GIC │
Pin0 ───────►│ ├─────────────►│ │ │ │
│ │ │ │ PPIY │ │
... │ GPIO │ │ ├─────────►│ │
│ │GPIOINT0-127 │ │ │ │
PinN ───────►│ ├─────────────►│ │ │ │
└────────┘ └──────────┘ └──────────┘
where:
- Pin0 is the first GPIO controller pin
- PinN is the last GPIO controller pin
- SPIX is the SPI interrupt with identifier X
- PPIY is the PPI interrupt with identifier Y
Implement suspend/resume functionality with syscore_ops to be able to
cache/restore the registers after/before the GPIO controller suspend/resume
functions are invoked.
As the syscore_ops suspend/resume functions do not take any argument make
the driver private data static so it can be accessed from the
suspend/resume functions.
The IA55 interrupt controller is resumed before the GPIO controller. As
GPIO pins could be in an a state which causes spurious interrupts, the
reconfiguration of the interrupt controller is restricted to restore the
interrupt type and leave them disabled.
An eventually required interrupt enable operation will be done as part of
the GPIO controller resume function after restoring the GPIO state.
[ tglx: Massaged changelog ]
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231120111820.87398-8-claudiu.beznea.uj@bp.renesas.com
|
|
register's index
There are 2 TITSR registers available on the IA55 interrupt controller.
Add a macro that retrieves the TITSR register offset based on it's
index. This macro is useful in when adding suspend/resume support so both
TITSR registers can be accessed in a for loop.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231120111820.87398-7-claudiu.beznea.uj@bp.renesas.com
|
|
The RZ/G2L manual (chapter "IRQ Status Control Register (ISCR)") describes
the operation to clear interrupts through the ISCR register as follows:
[Write operation]
When "Falling-edge detection", "Rising-edge detection" or
"Falling/Rising-edge detection" is set in IITSR:
- In case ISTAT is 1
0: IRQn interrupt detection status is cleared.
1: Invalid to write.
- In case ISTAT is 0
Invalid to write.
When "Low-level detection" is set in IITSR.:
Invalid to write.
Take the interrupt type into account when clearing interrupts through the
ISCR register to avoid writing the ISCR when the interrupt type is level.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-6-claudiu.beznea.uj@bp.renesas.com
|
|
Document structure members to follow the requirements specified in
maintainer-tip, section 4.3.7. Struct declarations and initializers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-5-claudiu.beznea.uj@bp.renesas.com
|
|
Align struct member names to tabs to follow the requirements from
maintainer-tip file. 3 tabs were used at the moment as the next commits
will add a new member which requires 3 tabs for a better view.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-4-claudiu.beznea.uj@bp.renesas.com
|
|
Use tabs instead of spaces in definition of TINT_EXTRACT_HWIRQ()
and TINT_EXTRACT_GPIOINT() macros to align with coding style
requirements described in Documentation/process/coding-style.rst,
"Indentation" chapter.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-3-claudiu.beznea.uj@bp.renesas.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Flush the translation service tables to prevent unpredictable
behavior on non-coherent GIC devices
* tag 'irq_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Flush ITS tables correctly in non-coherent GIC designs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
MediaTek firmware:
- Move the MediaTek GIC quirk handling from irqchip to core. Before
the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable
pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
addressed this issue. Fixed now at a deeper level in the arch code
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible
- Remove duplicate declaration of __arm64_sys##name following the
patch to avoid prototype warning for syscalls
- Typos in the elf_hwcap documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Remove duplicate declaration
Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
arm64: Move MediaTek GIC quirk handling from irqchip to core
arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
perf: arm_cspmu: Reject events meant for other PMUs
Documentation/arm64: Fix typos in elf_hwcaps
|
|
This reverts commit a07a594152173a3dd3bdd12fc7d73dbba54cdbca.
This is no longer needed after the patch ("arm64: Move MediaTek GIC
quirk handling from irqchip to core).
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231107072651.v2.2.I2c5fa192e767eb3ee233bc28eb60e2f8656c29a6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In commit 44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo NMIs on
MediaTek devices w/ firmware issues") we added a method for detecting
MediaTek devices with broken firmware and disabled pseudo-NMI. While
that worked, it didn't address the problem at a deep enough level.
The fundamental issue with this broken firmware is that it's not
saving and restoring several important GICR registers. The current
list is believed to be:
* GICR_NUM_IPRIORITYR
* GICR_CTLR
* GICR_ISPENDR0
* GICR_ISACTIVER0
* GICR_NSACR
Pseudo-NMI didn't work because it was the only thing (currently) in
the kernel that relied on the broken registers, so forcing pseudo-NMI
off was an effective fix. However, it could be observed that calling
system_uses_irq_prio_masking() on these systems still returned
"true". That caused confusion and led to the need for
commit a07a59415217 ("arm64: smp: avoid NMI IPIs with broken MediaTek
FW"). It's worried that the incorrect value returned by
system_uses_irq_prio_masking() on these systems will continue to
confuse future developers.
Let's fix the issue a little more completely by disabling IRQ
priorities at a deeper level in the kernel. Once we do this we can
revert some of the other bits of code dealing with this quirk.
This includes a partial revert of commit 44bd78dd2b88
("irqchip/gic-v3: Disable pseudo NMIs on MediaTek devices w/ firmware
issues"). This isn't a full revert because it leaves some of the
changes to the "quirks" structure around in case future code needs it.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231107072651.v2.1.Ide945748593cffd8ff0feb9ae22b795935b944d6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In non-coherent GIC designs, the ITS tables must be flushed before writing
to the GITS_BASER<n> registers, otherwise the ITS could read dirty tables,
which results in unpredictable behavior.
Flush the tables right at the begin of its_setup_baser() to prevent that.
[ tglx: Massage changelog ]
Fixes: a8707f553884 ("irqchip/gic-v3: Add Rockchip 3588001 erratum workaround")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fang Xiang <fangxiang3@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231030083256.4345-1-fangxiang3@xiaomi.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"No major architecture features this time around, just some new HWCAP
definitions, support for the Ampere SoC PMUs and a few fixes/cleanups.
The bulk of the changes is reworking of the CPU capability checking
code (cpus_have_cap() etc).
- Major refactoring of the CPU capability detection logic resulting
in the removal of the cpus_have_const_cap() function and migrating
the code to "alternative" branches where possible
- Backtrace/kgdb: use IPIs and pseudo-NMI
- Perf and PMU:
- Add support for Ampere SoC PMUs
- Multi-DTC improvements for larger CMN configurations with
multiple Debug & Trace Controllers
- Rework the Arm CoreSight PMU driver to allow separate
registration of vendor backend modules
- Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf
driver; use device_get_match_data() in the xgene driver; fix
NULL pointer dereference in the hisi driver caused by calling
cpuhp_state_remove_instance(); use-after-free in the hisi driver
- HWCAP updates:
- FEAT_SVE_B16B16 (BFloat16)
- FEAT_LRCPC3 (release consistency model)
- FEAT_LSE128 (128-bit atomic instructions)
- SVE: remove a couple of pseudo registers from the cpufeature code.
There is logic in place already to detect mismatched SVE features
- Miscellaneous:
- Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA
bouncing is needed. The buffer is still required for small
kmalloc() buffers
- Fix module PLT counting with !RANDOMIZE_BASE
- Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move
synchronisation code out of the set_ptes() loop
- More compact cpufeature displaying enabled cores
- Kselftest updates for the new CPU features"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
arm64/mm: Hoist synchronization out of set_ptes() loop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Exclude managed interrupts in the calculation of interrupts which
are targeted to a CPU which is about to be offlined to ensure that
there are enough free vectors on the still online CPUs to migrate
them over.
Managed interrupts do not need to be accounted because they are
either shut down on offline or migrated to an already reserved and
guaranteed slot on a still online CPU in the interrupts affinity
mask.
Including managed interrupts is overaccounting and can result in
needlessly aborting hibernation on large server machines.
- The usual set of small improvements
Drivers:
- Make the generic interrupt chip implementation handle interrupt
domains correctly and initialize the name pointers correctly
- Add interrupt affinity setting support to the Renesas RZG2L chip
driver.
- Prevent registering syscore operations multiple times in the SiFive
PLIC chip driver.
- Update device tree handling in the NXP Layerscape MSI chip driver"
* tag 'irq-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Fix syscore registration for multi-socket systems
irqchip/ls-scfg-msi: Use device_get_match_data()
genirq/generic_chip: Make irq_remove_generic_chip() irqdomain aware
genirq/matrix: Exclude managed interrupts in irq_matrix_allocated()
PCI/MSI: Provide stubs for IMS functions
irqchip/renesas-rzg2l: Enhance driver to support interrupt affinity setting
genirq/generic-chip: Fix the irq_chip name for /proc/interrupts
irqdomain: Annotate struct irq_domain with __counted_by
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Restore unintentionally lost quirk settings in the GIC irqchip driver,
which broke certain devices"
* tag 'irq-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Don't override quirk settings with default values
|
|
Multi-socket systems have a separate PLIC in each socket, so __plic_init()
is invoked for each PLIC. __plic_init() registers syscore operations, which
obviously fails on the second invocation.
Move it into the already existing condition for installing the CPU hotplug
state so it is only invoked once when the first PLIC is initialized.
[ tglx: Massaged changelog ]
Fixes: e80f0b6a2cf3 ("irqchip/irq-sifive-plic: Add syscore callbacks for hibernation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231025142820.390238-4-apatel@ventanamicro.com
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data in a single step without the unnecessary
intermediate match pointer.
With this, adjust the includes to explicitly include the correct
headers. That also serves as preparation to remove implicit includes within
the DT headers. of_platform.h currently includes platform_device.h among
others.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231020130255.2954415-3-robh@kernel.org
|
|
* for-next/cpus_have_const_cap: (38 commits)
: cpus_have_const_cap() removal
arm64: Remove cpus_have_const_cap()
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_REPEAT_TLBI
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_NVIDIA_CARMEL_CNP
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_CAVIUM_23154
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_2645198
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_1742098
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_1542419
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_843419
arm64: Avoid cpus_have_const_cap() for ARM64_UNMAP_KERNEL_AT_EL0
arm64: Avoid cpus_have_const_cap() for ARM64_{SVE,SME,SME2,FA64}
arm64: Avoid cpus_have_const_cap() for ARM64_SPECTRE_V2
arm64: Avoid cpus_have_const_cap() for ARM64_SSBS
arm64: Avoid cpus_have_const_cap() for ARM64_MTE
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_TLB_RANGE
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_WFXT
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_RNG
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_EPAN
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_PAN
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_GIC_PRIO_MASKING
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_DIT
...
|
|
'for-next/kselftest', 'for-next/misc' and 'for-next/cpufeat-display-cores', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
docs/perf: Add ampere_cspmu to toctree to fix a build warning
perf: arm_cspmu: ampere_cspmu: Add support for Ampere SoC PMU
perf: arm_cspmu: Support implementation specific validation
perf: arm_cspmu: Support implementation specific filters
perf: arm_cspmu: Split 64-bit write to 32-bit writes
perf: arm_cspmu: Separate Arm and vendor module
* for-next/sve-remove-pseudo-regs:
: arm64/fpsimd: Remove the vector length pseudo registers
arm64/sve: Remove SMCR pseudo register from cpufeature code
arm64/sve: Remove ZCR pseudo register from cpufeature code
* for-next/backtrace-ipi:
: Add IPI for backtraces/kgdb, use NMI
arm64: smp: Don't directly call arch_smp_send_reschedule() for wakeup
arm64: smp: avoid NMI IPIs with broken MediaTek FW
arm64: smp: Mark IPI globals as __ro_after_init
arm64: kgdb: Implement kgdb_roundup_cpus() to enable pseudo-NMI roundup
arm64: smp: IPI_CPU_STOP and IPI_CPU_CRASH_STOP should try for NMI
arm64: smp: Add arch support for backtrace using pseudo-NMI
arm64: smp: Remove dedicated wakeup IPI
arm64: idle: Tag the arm64 idle functions as __cpuidle
irqchip/gic-v3: Enable support for SGIs to act as NMIs
* for-next/kselftest:
: Various arm64 kselftest updates
kselftest/arm64: Validate SVCR in streaming SVE stress test
* for-next/misc:
: Miscellaneous patches
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
arm64/mm: Hoist synchronization out of set_ptes() loop
arm64: swiotlb: Reduce the default size if no ZONE_DMA bouncing needed
* for-next/cpufeat-display-cores:
: arm64 cpufeature display enabled cores
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
|
|
When splitting the allocation of the ITS node from its configuration,
some of the default settings were kept in the latter instead of
being moved to the former.
This has the side effect of negating some of the quirk detections that
have happened in between, amongst which the dreaded Synquacer hack
(that also affect Dominic's TI platform).
Move the initialisation of these fields early, so that they can again be
overriden by the Synquacer quirk.
Fixes: 9585a495ac93 ("irqchip/gic-v3-its: Split allocation from initialisation of its_node")
Reported by: Dominic Rath <dominic.rath@ibv-augsburg.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dominic Rath <dominic.rath@ibv-augsburg.net>
Link: https://lore.kernel.org/r/20231024084831.GA3788@JADEVM-DRA
Link: https://lore.kernel.org/r/20231024143431.2144579-1-maz@kernel.org
|
|
ACPI, irqchip and the architecture code all inspect the MADT
enabled bit for a GICC entry in the MADT.
The addition of an 'online capable' bit means all these sites need
updating.
Move the current checks behind a helper to make future updates easier.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Acked-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/E1quv5D-00AeNJ-U8@rmk-PC.armlinux.org.uk
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In gic_read_iar() we use cpus_have_const_cap() to check for
ARM64_WORKAROUND_CAVIUM_23154 but this is not necessary and
alternative_has_cap_*() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The ARM64_WORKAROUND_CAVIUM_23154 cpucap is detected and patched early
on the boot CPU before the GICv3 driver is initialized and hence before
gic_read_iar() is ever called. Thus it is not necessary to use
cpus_have_const_cap(), and alternative_has_cap() is equivalent.
In addition, arm64's gic_read_iar() lives in irq-gic-v3.c purely for
historical reasons. It was originally added prior to 32-bit arm support
in commit:
6d4e11c5e2e8cd54 ("irqchip/gicv3: Workaround for Cavium ThunderX erratum 23154")
When support for 32-bit arm was added, 32-bit arm's gic_read_iar()
implementation was placed in <asm/arch_gicv3.h>, but the arm64 version
was kept within irq-gic-v3.c as it depended on a static key local to
irq-gic-v3.c and it was easier to add ifdeffery, which is what we did in
commit:
7936e914f7b0827c ("irqchip/gic-v3: Refactor the arm64 specific parts")
Subsequently the static key was replaced with a cpucap in commit:
a4023f682739439b ("arm64: Add hypervisor safe helper for checking constant capabilities")
Since that commit there has been no need to keep arm64's gic_read_iar()
in irq-gic-v3.c.
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime. For consistency, move the arm64-specific gic_read_iar()
implementation over to arm64's <asm/arch_gicv3.h>. The
ARM64_WORKAROUND_CAVIUM_23154 cpucap is added to cpucap_is_possible() so
that code can be elided entirely when this is not possible.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add support to set the affinity of the IRQC interrupt by implementing
the irq_set_affinity callback via the parent interrupt chip.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231011195324.66807-1-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for interrupt chip drivers:
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register
can be read
- Make the Renesas RZG2L driver correct for interrupts which are
outside of the LSB in the TSSR register by using the proper macro
for calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc
Zyngier as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as
he is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple
of years!
Also note that commit 5873d380f4c0 ("irqchip/qcom-pdc: Add support for
v3.2 HW") has a incorrect SOB chain.
The real author is Neil. His patch was posted by Dmitry once and Neil
picked it up from the list and reposted it with the bogus SOB chain.
Not a big deal, but worth to mention. I wanted to fix that up, but
then got distracted and Marc piled more changes on top. So I decided
to leave it as is instead of rebasing world"
* tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove myself from the general IRQ subsystem maintenance
MAINTAINERS: Add myself as the ARM GIC maintainer
irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()
irqchip/stm32-exti: add missing DT IRQ flag translation
irqchip/riscv-intc: Mark all INTC nodes as initialized
irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing
irqchip/gic-v3-its: Split allocation from initialisation of its_node
dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property
arm64: dts: qcom: sm8150: extend the size of the PDC resource
irqchip/qcom-pdc: Add support for v3.2 HW
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct intmux_data.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175131.work.718-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Use the existing irq_data_get_irq_chip_data() helper instead of
open-coding the same operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/8e47cc6400e5a82c854c855948d2665a3a3197e3.1695819391.git.geert+renesas@glider.be
|
|
The STM32F4/7 EXTI driver was missing the xlate callback, so IRQ trigger
flags specified in the device tree were being ignored. This was
preventing the RTC alarm interrupt from working, because it must be set
to trigger on the rising edge to function correctly.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003162003.1649967-1-ben.wolsieffer@hefring.com
|
|
The RISC-V INTC local interrupts are per-HART (or per-CPU) so we
create INTC IRQ domain only for the INTC node belonging to the boot
HART. This means only the boot HART INTC node will be marked as
initialized and other INTC nodes won't be marked which results
downstream interrupt controllers (such as PLIC, IMSIC and APLIC
direct-mode) not being probed due to missing device suppliers.
To address this issue, we mark all INTC node for which we don't
create IRQ domain as initialized.
Reported-by: Dmitry Dunaev <dunaev@tecon.ru>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230926102801.1591126-1-dunaev@tecon.ru
Link: https://lore.kernel.org/r/20231003044403.1974628-4-apatel@ventanamicro.com
|
|
The GIC architecture specification defines a set of registers
for redistributors and ITSes that control the sharebility and
cacheability attributes of redistributors/ITSes initiator ports
on the interconnect (GICR_[V]PROPBASER, GICR_[V]PENDBASER,
GITS_BASER<n>).
Architecturally the GIC provides a means to drive shareability
and cacheability attributes signals and related IWB/OWB/ISH barriers
but it is not mandatory for designs to wire up the corresponding
interconnect signals that control the cacheability/shareability
of transactions.
Redistributors and ITSes interconnect ports can be connected to
non-coherent interconnects that are not able to manage the
shareability/cacheability attributes; this implicitly makes
the redistributors and ITSes non-coherent observers.
So far, the GIC driver on probe executes a write to "probe" for
the redistributors and ITSes registers shareability bitfields
by writing a value (ie InnerShareable - the shareability domain the
CPUs are in) and check it back to detect whether the value sticks or
not; this hinges on a GIC programming model behaviour that predates the
current specifications, that just define shareability bits as writeable
but do not guarantee that writing certain shareability values
enable the expected behaviour for the redistributors/ITSes
memory interconnect ports.
To enable non-coherent GIC designs, introduce the "dma-noncoherent"
device tree property to allow firmware to describe redistributors and
ITSes as non-coherent observers on the memory interconnect and use the
property to force the shareability attributes to be programmed into the
redistributors and ITSes registers through the GIC quirks mechanism.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006125929.48591-3-lpieralisi@kernel.org
|
|
In order to pave the way for more fancy quirk handling without making
more of a mess of this terrible driver, split the allocation of the
ITS descriptor (its_node) from the actual probing.
This will allow firmware-specific hooks to be added between these
two points.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006125929.48591-4-lpieralisi@kernel.org
|
|
Some MediaTek devices have broken firmware which corrupts some GICR
registers behind the back of the OS, and pseudo-NMIs cannot be used on
these devices. For more details see commit:
44bd78dd2b8897f5 ("irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues")
We did not take this problem into account in commit:
331a1b3a836c0f38 ("arm64: smp: Add arch support for backtrace using pseudo-NMI")
Since that commit arm64's SMP code will try to setup some IPIs as
pseudo-NMIs, even on systems with broken FW. The GICv3 code will
(rightly) reject attempts to request interrupts as pseudo-NMIs,
resulting in boot-time failures.
Avoid the problem by taking the broken FW into account when deciding to
request IPIs as pseudo-NMIs. The GICv3 driver maintains a static_key
named "supports_pseudo_nmis" which is false on systems with broken FW,
and we can consult this within ipi_should_be_nmi().
Fixes: 331a1b3a836c ("arm64: smp: Add arch support for backtrace using pseudo-NMI")
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Closes: https://issuetracker.google.com/issues/197061987#comment68
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
As of commit 6abbd6988971 ("irqchip/gic, gic-v3: Make SGIs use
handle_percpu_devid_irq()") SGIs are treated the same as PPIs/EPPIs
and use handle_percpu_devid_irq() by default. Unfortunately,
handle_percpu_devid_irq() isn't NMI safe, and so to run in an NMI
context those should use handle_percpu_devid_fasteoi_nmi().
In order to accomplish this, we just have to make room for SGIs in the
array of refcounts that keeps track of which interrupts are set as
NMI. We also rename the array and create a new indexing scheme that
accounts for SGIs.
Also, enable NMI support prior to gic_smp_init() as allocation of SGIs
as IRQs/NMIs happen as part of this routine.
Co-developed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230906090246.v13.1.I1223c11c88937bd0cbd9b086d4ef216985797302@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The logic to clear the TINT interrupt source in rzg2l_irqc_irq_disable()
is wrong as the mask is correct only for LSB on the TSSR register.
This issue is found when testing with two TINT interrupt sources. So fix
the logic for all TINTs by using the macro TSSEL_SHIFT() to multiply
tssr_offset with 8.
Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230918122411.237635-2-biju.das.jz@bp.renesas.com
|
|
Add <linux/irqchips/xtensa-mx.h> to provide the function prototype to
prevent a build warning:
drivers/irqchip/irq-xtensa-mx.c:166:12: warning: no previous prototype for 'xtensa_mx_init_legacy' [-Wmissing-prototypes]
166 | int __init xtensa_mx_init_legacy(struct device_node *interrupt_parent)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Message-Id: <20230920052139.10570-10-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Starting from HW version 3.2 the IRQ_ENABLE bit has moved to the
IRQ_i_CFG register and requires a change of the driver to avoid
writing into an undefined register address.
Get the HW version from registers and set the IRQ_ENABLE bit to the
correct register depending on the HW version.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230905-topic-sm8x50-upstream-pdc-ver-v4-1-fc633c7df84b@linaro.org
|
|
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other
firmware drivers.
On the soc driver side, the updates are mostly cleanups across a
number of Arm platforms. On driver for loongarch adds power management
for DT based systems, another driver is for HiSilicon's Arm server
chips with their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform"
* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
bus: fsl-mc: Use common ranges functions
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
soc: loongson2_pm: add power management support
soc: dt-bindings: add loongson-2 pm
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
bus: ti-sysc: Fix cast to enum warning
soc: kunpeng_hccs: add MAILBOX dependency
MAINTAINERS: remove OXNAS entry
dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
soc: kunpeng_hccs: fix size_t format string
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
dt-bindings: firmware: qcom: scm: Updating VMID list
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- Fix for Loongsoon eiointc init error handling
- Fix a bunch of warning showing up when -Wmissing-prototypes is set
- A set of fixes for drivers checking for 0 as a potential return
value from platform_get_irq()
- Another set of patches converting existing code to the use of helpers
such as of_address_count() and devm_platform_get_and_ioremap_resource()
- A tree-wide cleanup of drivers including of_*.h without discrimination
- Added support for the Amlogic C3 SoCs
Link: https://lore.kernel.org/lkml/20230828091543.4001857-1-maz@kernel.org
|
|
The Amlogic-C3 SoCs support 12 GPIO IRQ lines compared with previous
serial chips and have something different, details are as below.
IRQ Number:
- 54 1 pins on bank TESTN
- 53:40 14 pins on bank X
- 39:33 7 pins on bank D
- 32:27 6 pins on bank A
- 26:22 5 pins on bank E
- 21:15 7 pins on bank C
- 14:0 15 pins on bank B
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230628091533.3884385-3-huqiang.qin@amlogic.com
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230704100253.36045-2-frank.li@vivo.com
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230704100253.36045-1-frank.li@vivo.com
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230714174645.4058547-1-robh@kernel.org
|
|
After commit 16988c742968 ("of/address: introduce of_address_count() helper"),
Use of_address_count() to instead of open-coding it, it's no functional change.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230726030741.1136244-1-yangyingliang@huawei.com
|
|
platform_get_irq()
It is not possible for platform_get_irq() to return 0. Use the
return value from platform_get_irq().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230803083452.4085650-3-ruanjinjie@huawei.com
|
|
It is not possible for platform_get_irq() to return 0. Use the
return value from platform_get_irq().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230803083452.4085650-2-ruanjinjie@huawei.com
|
|
i8259_of_init() is only used as an initcall and does not need to be global,
so mark it static to avoid:
drivers/irqchip/irq-i8259.c:343:12: warning: no previous prototype for 'i8259_of_init' [-Wmissing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230810123404.1222332-3-arnd@kernel.org
|
|
This function is only used locally and should be static to avoid a warning:
drivers/irqchip/irq-mips-gic.c:560:6: error: no previous prototype for 'gic_irq_domain_free' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230810123404.1222332-2-arnd@kernel.org
|
|
The declaration for this function is not included, which leads to a harmless warning:
drivers/irqchip/irq-xtensa-pic.c:91:12: error: no previous prototype for 'xtensa_pic_init_legacy' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230810123404.1222332-1-arnd@kernel.org
|
|
Return value of function eiointc_index is int, however it is converted
into uint32_t and then compared smaller than zero, this will cause logic
problem.
Fixes: dd281e1a1a93 ("irqchip: Add Loongson Extended I/O interrupt controller support")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811095805.2974722-2-maobibo@loongson.cn
|
|
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common than
PCI devices. Hence it could have a fully functional s390 kernel with
CONFIG_PCI=n, then the relevant iomem mapping functions [including
ioremap(), devm_ioremap(), etc.] are not available.
Here let AL_FIC depend on HAS_IOMEM so that it won't be built
to cause below compiling error if PCI is unset:
------
ld: drivers/irqchip/irq-al-fic.o: in function `al_fic_init_dt':
irq-al-fic.c:(.init.text+0x76): undefined reference to `of_iomap'
ld: irq-al-fic.c:(.init.text+0x4ce): undefined reference to `iounmap'
------
Link: https://lkml.kernel.org/r/20230707135852.24292-7-bhe@redhat.com
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
and fix all in-tree references.
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230717192456.453124-1-costa.shul@redhat.com
|
|
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 IRQ controller.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20230814-topic-oxnas-upstream-remove-v3-1-e2ba579a49d3@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Work around an erratum on GIC700, where a race between a CPU handling
a wake-up interrupt, a change of affinity, and another CPU going to
sleep can result in a lack of wake-up event on the next interrupt
- Fix the locking required on a VPE for GICv4
- Enable Rockchip 3588001 erratum workaround for RK3588S
- Fix the irq-bcm6345-l1 assumtions of the boot CPU always be the first
CPU in the system
* tag 'irq_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Workaround for GIC-700 erratum 2941627
irqchip/gic-v3: Enable Rockchip 3588001 erratum workaround for RK3588S
irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation
irq-bcm6345-l1: Do not assume a fixed block to cpu mapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Work around an erratum on GIC700, where a race between a CPU
handling a wake-up interrupt, a change of affinity, and another
CPU going to sleep can result in a lack of wake-up event on the
next interrupt.
- Fix the locking required on a VPE for GICv4
- Enable Rockchip 3588001 erratum workaround for RK3588S
- Fix the irq-bcm6345-l1 assumtions of the boot CPU always be
the first CPU in the system
Link: https://lore.kernel.org/lkml/20230717113857.304919-1-maz@kernel.org
|
|
GIC700 erratum 2941627 may cause GIC-700 missing SPIs wake
requests when SPIs are deactivated while targeting a
sleeping CPU - ie a CPU for which the redistributor:
GICR_WAKER.ProcessorSleep == 1
This runtime situation can happen if an SPI that has been
activated on a core is retargeted to a different core, it
becomes pending and the target core subsequently enters a
power state quiescing the respective redistributor.
When this situation is hit, the de-activation carried out
on the core that activated the SPI (through either ICC_EOIR1_EL1
or ICC_DIR_EL1 register writes) does not trigger a wake
requests for the sleeping GIC redistributor even if the SPI
is pending.
Work around the erratum by de-activating the SPI using the
redistributor GICD_ICACTIVER register if the runtime
conditions require it (ie the IRQ was retargeted between
activation and de-activation).
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230704155034.148262-1-lpieralisi@kernel.org
|
|
Commit a8707f553884 ("irqchip/gic-v3: Add Rockchip 3588001 erratum
workaround") mentioned RK3588S (the slimmed down variant of RK3588)
being affected, but did not check for its compatible value. Thus the
quirk is not applied on RK3588S. Since the GIC ITS node got added to the
upstream DT, boards using RK3588S are no longer booting without this
quirk being applied.
Fixes: 06cdac8e8407 ("arm64: dts: rockchip: add GIC ITS support to rk3588")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230703164129.193991-1-sebastian.reichel@collabora.com
|
|
We normally rely on the irq_to_cpuid_[un]lock() primitives to make
sure nothing will change col->idx while performing a LPI invalidation.
However, these primitives do not cover VPE doorbells, and we have
some open-coded locking for that. Unfortunately, this locking is
pretty bogus.
Instead, extend the above primitives to cover VPE doorbells and
convert the whole thing to it.
Fixes: f3a059219bc7 ("irqchip/gic-v4.1: Ensure mutual exclusion between vPE affinity change and RD access")
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: wanghaibin.wang@huawei.com
Tested-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20230617073242.3199746-1-maz@kernel.org
|
|
The irq to block mapping is fixed, and interrupts from the first block
will always be routed to the first parent IRQ. But the parent interrupts
themselves can be routed to any available CPU.
This is used by the bootloader to map the first parent interrupt to the
boot CPU, regardless wether the boot CPU is the first one or the second
one.
When booting from the second CPU, the assumption that the first block's
IRQ is mapped to the first CPU breaks, and the system hangs because
interrupts do not get routed correctly.
Fix this by passing the appropriate bcm6434_l1_cpu to the interrupt
handler instead of the chip itself, so the handler always has the right
block.
Fixes: c7c42ec2baa1 ("irqchips/bmips: Add bcm6345-l1 interrupt controller")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230629072620.62527-1-jonas.gorski@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for ACPI
- Various cleanups to the ISA string parsing, including making them
case-insensitive
- Support for the vector extension
- Support for independent irq/softirq stacks
- Our CPU DT binding now has "unevaluatedProperties: false"
* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
riscv: hibernate: remove WARN_ON in save_processor_state
dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
dt-bindings: riscv: cpus: add a ref the common cpu schema
riscv: stack: Add config of thread stack size
riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
RISC-V: always report presence of extensions formerly part of the base ISA
dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
RISC-V: remove decrement/increment dance in ISA string parser
RISC-V: rework comments in ISA string parser
RISC-V: validate riscv,isa at boot, not during ISA string parsing
RISC-V: split early & late of_node to hartid mapping
RISC-V: simplify register width check in ISA string parsing
perf: RISC-V: Limit the number of counters returned from SBI
riscv: replace deprecated scall with ecall
riscv: uprobes: Restore thread.bad_cause
riscv: mm: try VMA lock-based page fault handling first
riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
RISC-V: Track ISA extensions per hart
...
|
|
Pull ARM updates from Russell King:
- lots of build cleanups from Arnd spread throughout the arch/arm tree
- replace strlcpy() with the preferred strscpy()
- use sign_extend32() in the module linker
- drop handle_irq() machine descriptor method
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9315/1: fiq: include asm/mach/irq.h for prototypes
ARM: 9314/1: tcm: move tcm_init() prototype to asm/tcm.h
ARM: 9313/1: vdso: add missing prototypes
ARM: 9312/1: vfp: include asm/neon.h in vfpmodule.c
ARM: 9311/1: decompressor: move function prototypes to misc.h
ARM: 9310/1: xip-kernel: add __inflate_kernel_data prototype
ARM: 9309/1: add missing syscall prototypes
ARM: 9308/1: move setup functions to header
ARM: 9307/1: nommu: include asm/idmap.h
ARM: 9306/1: cacheflush: avoid __flush_anon_page() missing-prototype warning
ARM: 9305/1: add clear/copy_user_highpage declarations
ARM: 9304/1: add prototype for function called only from asm
ARM: 9303/1: kprobes: avoid missing-declaration warnings
ARM: 9302/1: traps: hide unused functions on NOMMU
ARM: 9301/1: dma-mapping: hide unused dma_contiguous_early_fixup function
ARM: 9300/1: Replace all non-returning strlcpy with strscpy
ARM: 9299/1: module: use sign_extend32() to extend the signedness
ARM: 9298/1: Drop custom mdesc->handle_irq()
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Convert the interrupt descriptor storage to a maple tree to
overcome the limitations of the radixtree + fixed size bitmap.
This allows us to handle very large servers with a huge number of
guests without imposing a huge memory overhead on everyone
- Implement optional retriggering of interrupts which utilize the
fasteoi handler to work around a GICv3 architecture issue
Drivers:
- A set of fixes and updates for the Loongson/Loongarch related
drivers
- Workaound for an ASR8601 integration hickup which ends up with CPU
numbering which can't be represented in the GIC implementation
- The usual set of boring fixes and updates all over the place"
* tag 'irq-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
Revert "irqchip/mxs: Include linux/irqchip/mxs.h"
irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
irqchip/stm32-exti: Fix warning on initialized field overwritten
irqchip/stm32-exti: Add STM32MP15xx IWDG2 EXTI to GIC map
irqchip/gicv3: Add a iort_pmsi_get_dev_id() prototype
irqchip/mxs: Include linux/irqchip/mxs.h
irqchip/clps711x: Remove unused clps711x_intc_init() function
irqchip/mmp: Remove non-DT codepath
irqchip/ftintc010: Mark all function static
irqdomain: Include internals.h for function prototypes
irqchip/loongson-eiointc: Add DT init support
dt-bindings: interrupt-controller: Add Loongson EIOINTC
irqchip/loongson-eiointc: Fix irq affinity setting during resume
irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag
irqchip/loongson-liointc: Fix IRQ trigger polarity
irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment
irqchip/loongson-pch-pic: Fix initialization of HT vector register
irqchip/gic-v3-its: Enable RESEND_WHEN_IN_PROGRESS for LPIs
genirq: Allow fasteoi handler to resend interrupts on concurrent handling
genirq: Expand doc for PENDING and REPLAY flags
...
|
|
* irq/misc-6.5:
: .
: Misc cleanups:
:
: - Add a number of missing prototypes
: - Mark global symbol as static where needed
: - Drop some now useless non-DT code paths
: - Add a missing interrupt mapping to the STM32 irqchip
: - Silence another STM32 warning when building with W=1
: - Fix the jcore-aic driver that actually never worked...
: .
Revert "irqchip/mxs: Include linux/irqchip/mxs.h"
irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
irqchip/stm32-exti: Fix warning on initialized field overwritten
irqchip/stm32-exti: Add STM32MP15xx IWDG2 EXTI to GIC map
irqchip/gicv3: Add a iort_pmsi_get_dev_id() prototype
irqchip/mxs: Include linux/irqchip/mxs.h
irqchip/clps711x: Remove unused clps711x_intc_init() function
irqchip/mmp: Remove non-DT codepath
irqchip/ftintc010: Mark all function static
irqdomain: Include internals.h for function prototypes
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
This reverts commit 5b7e5676209120814dbb9fec8bc3769f0f7a7958.
Although including linux/irqchip/mxs.h is technically correct,
this clashes with the parallel removal of this include file
with 32bit ARM modernizing the low level irq handling as part of
5bb578a0c1b8 ("ARM: 9298/1: Drop custom mdesc->handle_irq()").
As such, this patch is not only unnecessary, it also breaks
compilation in -next. Revert it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Shawn Guo <shawnguo@kernel.org>
|
|
ARM exclusively uses GENERIC_IRQ_MULTI_HANDLER, so at some point
set_handle_irq() needs to be called to handle system-wide
interrupts.
For all DT-enabled boards, this call happens down in the
drivers/irqchip subsystem, after locating the target irqchip
driver from the device tree.
We still have a few instances of the boardfiles with machine
descriptors passing a machine-specific .handle_irq() to the
ARM kernel core.
Get rid of this by letting the few remaining machines consistently
call set_handle_irq() from the end of the .init_irq() callback
instead and diet down one member from the machine descriptor.
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The initialization function for the J-Core AIC aic_irq_of_init() is
currently missing the call to irq_alloc_descs() which allocates and
initializes all the IRQ descriptors. Add missing function call and
return the error code from irq_alloc_descs() in case the allocation
fails.
Fixes: 981b58f66cfc ("irqchip/jcore-aic: Add J-Core AIC driver")
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230510163343.43090-1-glaubitz@physik.fu-berlin.de
|
|
While compiling with W=1, both gcc and clang complain about a
tricky way to initialize an array by filling it with a non-zero
value and then overrride some of the array elements.
In this case the override is intentional, so just disable the
specific warning for only this part of the code.
Note: the flag "-Woverride-init" is recognized by both compilers,
but the warning msg from clang reports "-Winitializer-overrides".
The doc of clang clarifies that the two flags are synonyms, so use
here only the flag name common on both compilers.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Fixes: c297493336b7 ("irqchip/stm32-exti: Simplify irq description table")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230601155614.34490-1-antonio.borneo@foss.st.com
|
|
The EXTI interrupt 46 is mapped to GIC interrupt 151. Add the
missing mapping, which is used for IWDG2 pretimeout interrupt
and wake up source.
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230517194349.105745-1-marex@denx.de
|
|
This header contains the definition for icoll_handle_irq(), which
is used in arch/arm/mach-mxs/mach-mxs.c, without this we get a warning
about a missing prototype when building with W=1.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230516200516.554663-4-arnd@kernel.org
|
|
This function has no caller or declaration any more:
drivers/irqchip/irq-clps711x.c:215:13: error: no previous prototype for 'clps711x_intc_init'
The #ifdef check around clps711x_intc_init_dt() is also not
needed since the file is only built when that is enabled.
Fixes: 4a56f46a7dc6 ("ARM: clps711x: Remove boards support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230516200516.554663-3-arnd@kernel.org
|
|
Building with "W=1" warns about missing declarations for
two functions in the mmp irqchip driver:
drivers/irqchip/irq-mmp.c:248:13: error: no previous prototype for 'icu_init_irq'
drivers/irqchip/irq-mmp.c:271:13: error: no previous prototype for 'mmp2_init_icu'
The declarations are present in an unused header, but since there is no
caller, it's best to just remove the functions and the header completely,
making the driver DT-only to match the state of the platform.
Fixes: 77acc85ce797 ("ARM: mmp: remove device definitions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230516200516.554663-2-arnd@kernel.org
|
|
Two functions were always global but never had any callers
outside of this file:
drivers/irqchip/irq-ftintc010.c:128:39: error: no previous prototype for 'ft010_irqchip_handle_irq'
drivers/irqchip/irq-ftintc010.c:165:12: error: no previous prototype for 'ft010_of_init_irq'
Fixes: b4d3053c8ce9 ("irqchip: Add a driver for Cortina Gemini")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230516200516.554663-1-arnd@kernel.org
|
|
* irq/loongarch-fixes-6.5:
: .
: Yet another series of random fixes for the Loongson/Loongarch
: string of interrupt controller, covering
:
: - affinity setting,
: - trigger polarity,
: - wake-up,
: - DT support
: .
irqchip/loongson-eiointc: Add DT init support
dt-bindings: interrupt-controller: Add Loongson EIOINTC
irqchip/loongson-eiointc: Fix irq affinity setting during resume
irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag
irqchip/loongson-liointc: Fix IRQ trigger polarity
irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment
irqchip/loongson-pch-pic: Fix initialization of HT vector register
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add EIOINTC irqchip DT support, which is needed for Loongson chips
based on DT and supporting EIOINTC, such as the Loongson-2K0500 SOC.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/764e02d924094580ac0f1d15535f4b98308705c6.1683279769.git.zhoubinbin@loongson.cn
|
|
The hierarchy of PCH PIC, PCH PCI MSI and EIONTC is as following:
PCH PIC ------->|
|---->EIOINTC
PCH PCI MSI --->|
so the irq_data list of irq_desc for IRQs on PCH PIC and PCH PCI MSI
is like this:
irq_desc->irq_data(domain: PCH PIC)->parent_data(domain: EIOINTC)
irq_desc->irq_data(domain: PCH PCI MSI)->parent_data(domain: EIOINTC)
In eiointc_resume(), the irq_data passed into eiointc_set_irq_affinity()
should be matched to EIOINTC domain instead of PCH PIC or PCH PCI MSI
domain, so fix it.
Fixes: a90335c2dfb4 ("irqchip/loongson-eiointc: Add suspend/resume support")
Reported-by: yangqiming <yangqiming@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-6-lvjianmin@loongson.cn
|
|
LIOINTC doesn't require specific logic to work with wakeup IRQs,
and no irq_set_wake callback is needed. To allow registered IRQs
from LIOINTC to be used as a wakeup-source, and ensure irq_set_irq_wake()
works well, the flag IRQCHIP_SKIP_SET_WAKE should be added.
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-5-lvjianmin@loongson.cn
|
|
For the INT_POLARITY register of Loongson-2K series IRQ
controller, '0' indicates high level or rising edge triggered,
'1' indicates low level or falling edge triggered, and we
can find out the information from the Loongson 2K1000LA User
Manual v1.0, Table 9-2, Section 9.3 (中断寄存器描述 / Description
of the Interrupt Registers).
For Loongson-3 CPU series, setting INT_POLARITY register is not
supported and writting it has no effect.
So trigger polarity setting shouled be fixed for Loongson-2K CPU
series.
Fixes: 17343d0b4039 ("irqchip/loongson-liointc: Support to set IRQ type for ACPI path")
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-4-lvjianmin@loongson.cn
|
|
In DeviceTree path, when ht_vec_base is not zero, the hwirq of PCH PIC
will be assigned incorrectly. Because when pch_pic_domain_translate()
adds the ht_vec_base to hwirq, the hwirq does not have the ht_vec_base
subtracted when calling irq_domain_set_info().
The ht_vec_base is designed for the parent irq chip/domain of the PCH PIC.
It seems not proper to deal this in callbacks of the PCH PIC domain and
let's put this back like the initial commit ef8c01eb64ca ("irqchip: Add
Loongson PCH PIC controller").
Fixes: bcdd75c596c8 ("irqchip/loongson-pch-pic: Add ACPI init support")
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-3-lvjianmin@loongson.cn
|
|
In an ACPI-based dual-bridge system, IRQ of each bridge's
PCH PIC sent to CPU is always a zero-based number, which
means that the IRQ on PCH PIC of each bridge is mapped into
vector range from 0 to 63 of upstream irqchip(e.g. EIOINTC).
EIOINTC N: [0 ... 63 | 64 ... 255]
-------- ----------
^ ^
| |
PCH PIC N |
PCH MSI N
For example, the IRQ vector number of sata controller on
PCH PIC of each bridge is 16, which is sent to upstream
irqchip of EIOINTC when an interrupt occurs, which will set
bit 16 of EIOINTC. Since hwirq of 16 on EIOINTC has been
mapped to a irq_desc for sata controller during hierarchy
irq allocation, the related mapped IRQ will be found through
irq_resolve_mapping() in the IRQ domain of EIOINTC.
So, the IRQ number set in HT vector register should be fixed
to be a zero-based number.
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Co-developed-by: liuyun <liuyun@loongson.cn>
Signed-off-by: liuyun <liuyun@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-2-lvjianmin@loongson.cn
|
|
* irq/lpi-resend:
: .
: Patch series from James Gowans, working around an issue with
: GICv3 LPIs that can fire concurrently on multiple CPUs.
: .
irqchip/gic-v3-its: Enable RESEND_WHEN_IN_PROGRESS for LPIs
genirq: Allow fasteoi handler to resend interrupts on concurrent handling
genirq: Expand doc for PENDING and REPLAY flags
genirq: Use BIT() for the IRQD_* state flags
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
GICv3 LPIs are impacted by an architectural design issue: they do not
have a global active state and as such a given LPI can be delivered to
a new CPU after an affinity change while the previous instance of the
same LPI handler has not yet completed on the original CPU.
If LPIs had an active state, this second LPI would not be delivered
until the first CPU deactivated the initial LPI, just like SPIs.
To solve this issue, use the newly introduced IRQD_RESEND_WHEN_IN_PROGRESS
flag, ensuring that we do not lose an LPI being delivered during that window
by getting the GIC to resend it.
This workaround gets enabled for all LPIs, including the VPE doorbells.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Gowans <jgowans@amazon.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: KarimAllah Raslan <karahmed@amazon.com>
Cc: Yipeng Zou <zouyipeng@huawei.com>
Cc: Zhang Jianhua <chris.zjh@huawei.com>
[maz: massaged commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230608120021.3273400-4-jgowans@amazon.com
|
|
Add support for initializing the RISC-V INTC driver on ACPI
platforms.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-17-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When checking for OF quirks, make sure either 'compatible' or 'property'
is set, and give up otherwise.
This avoids non-OF quirks being randomly applied as they don't have any
of the OF data that need checking.
Cc: Douglas Anderson <dianders@chromium.org>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues")
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The ASR8601 SoC combines ARMv8.2 CPUs from ARM with a GIC-500,
also from ARM. However, the two are incompatible as the former
expose an affinity in the form of (cluster, core, thread),
while the latter can only deal with (cluster, core). If nothing
is done, the GIC simply cannot route interrupts to the CPUs.
Implement a workaround that shifts the affinity down by a level,
ensuring the delivery of interrupts despite the implementation
mismatch.
Signed-off-by: zhengyan <zhengyan@asrmicro.com>
[maz: rewrote commit message, reimplemented the workaround
in a manageable way]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The GICv3 driver uses multiple formats for the affinity, all
derived from a reading of MPDR_EL1 on one CPU or another.
Simplify the handling of these affinity by moving the access
to the CPU affinity via cpu_logical_map() inside the helper,
and rename it accordingly.
This will be helpful to support some more broken hardware.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Dan Carpenter reported that commit fea087fc291b "irqchip/mbigen: move
to use bus_get_dev_root()" leads to the following Smatch static checker
warning:
drivers/irqchip/irq-mbigen.c:258 mbigen_of_create_domain()
error: potentially dereferencing uninitialized 'child'.
It should not cause a problem on real hardware, but better to fix the
warning, let's move the bus_get_dev_root() out of the loop, and unify
the error handling to silence it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230505090654.12793-1-wangkefeng.wang@huawei.com
|
|
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/irqchip/irq-meson-gpio.c:153:34: error: ‘meson_irq_gpio_matches’ defined but not used [-Werror=unused-const-variable=]
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230512164506.212267-1-krzysztof.kozlowski@linaro.org
|
|
Since we may hold gic_lock in hardirq context, use raw spinlock
makes more sense given that it is for low-level interrupt handling
routine and the critical section is small.
Fixes BUG:
[ 0.426106] =============================
[ 0.426257] [ BUG: Invalid wait context ]
[ 0.426422] 6.3.0-rc7-next-20230421-dirty #54 Not tainted
[ 0.426638] -----------------------------
[ 0.426766] swapper/0/1 is trying to lock:
[ 0.426954] ffffffff8104e7b8 (gic_lock){....}-{3:3}, at: gic_set_type+0x30/08
Fixes: 95150ae8b330 ("irqchip: mips-gic: Implement irq_set_type callback")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230424103156.66753-3-jiaxun.yang@flygoat.com
|
|
When a GIC local interrupt is not routable, it's vl_map will be used
to control some internal states for core (providing IPTI, IPPCI, IPFDC
input signal for core). Overriding it will interfere core's intetrupt
controller.
Do not touch vl_map if a local interrupt is not routable, we are not
going to remap it.
Before dd098a0e0319 (" irqchip/mips-gic: Get rid of the reliance on
irq_cpu_online()"), if a local interrupt is not routable, then it won't
be requested from GIC Local domain, and thus gic_all_vpes_irq_cpu_online
won't be called for that particular interrupt.
Fixes: dd098a0e0319 (" irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230424103156.66753-2-jiaxun.yang@flygoat.com
|
|
Some Chromebooks with Mediatek SoCs have a problem where the firmware
doesn't properly save/restore certain GICR registers. Newer
Chromebooks should fix this issue and we may be able to do firmware
updates for old Chromebooks. At the moment, the only known issue with
these Chromebooks is that we can't enable "pseudo NMIs" since the
priority register can be lost. Enabling "pseudo NMIs" on Chromebooks
with the problematic firmware causes crashes and freezes.
Let's detect devices with this problem and then disable "pseudo NMIs"
on them. We'll detect the problem by looking for the presence of the
"mediatek,broken-save-restore-fw" property in the GIC device tree
node. Any devices with fixed firmware will not have this property.
Our detection plan works because we never bake a Chromebook's device
tree into firmware. Instead, device trees are always bundled with the
kernel. We'll update the device trees of all affected Chromebooks and
then we'll never enable "pseudo NMI" on a kernel that is bundled with
old device trees. When a firmware update is shipped that fixes this
issue it will know to patch the device tree to remove the property.
In order to make this work, the quick detection mechanism of the GICv3
code is extended to be able to look for properties in addition to
looking at "compatible".
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230515131353.v2.2.I88dc0a0eb1d9d537de61604cd8994ecc55c0cac1@changeid
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Huawei B593u-12
- added support for virt board aligned to QEMU MIPS virt board
- added support for doing DMA coherence on a per device base
- reworked handling of RALINK SoCs
- cleanup for Loongon64 barriers
- removed deprecated support for MIPS_CMP SMP handling method
- removed support Sibyte CARMEL and CHRINE boards
- cleanups and fixes
* tag 'mips_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits)
MIPS: uprobes: Restore thread.trap_nr
MIPS: Don't clear _PAGE_SPECIAL in _PAGE_CHG_MASK
MIPS: Sink body of check_bugs_early() into its only call site
MIPS: Mark check_bugs() as __init
Revert "MIPS: generic: Enable all CPUs supported by virt board in Kconfig"
MIPS: octeon_switch: Remove duplicated labels
MIPS: loongson2ef: Add missing break in cs5536_isa
MIPS: Remove set_swbp() in uprobes.c
MIPS: Use def_bool y for ARCH_SUPPORTS_UPROBES
MIPS: fw: Allow firmware to pass a empty env
MIPS: Remove deprecated CONFIG_MIPS_CMP
MIPS: lantiq: remove unused function declaration
MIPS: Drop unused positional parameter in local_irq_{dis,en}able
MIPS: mm: Remove local_cache_flush_page
MIPS: Remove no longer used ide.h
MIPS: mm: Remove unused *cache_page_indexed flush functions
MIPS: generic: Enable all CPUs supported by virt board in Kconfig
MIPS: Add board config for virt board
MIPS: Octeon: Disable CVMSEG by default on other platforms
MIPS: Loongson: Don't select platform features with CPU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
|
|
* irq/misc-6.4:
: .
: Misc irqchip changes for 6.4:
:
: - Replace uses of of_find_property() with the more
: appropriate of_property_read_bool()
:
: - Make bcm-6345-l1 request its MMIO region
:
: - Add suspend support to the SiFive PLIC
:
: - Drop support for stih415, stih416 and stid127 platforms
: .
irqchip/st: Remove stih415/stih416 and stid127 platforms support
irqchip/irq-sifive-plic: Add syscore callbacks for hibernation
irqchip: Use of_property_read_bool() for boolean properties
irqchip/bcm-6345-l1: Request memory region
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* irq/loongarch-fixes-6.4:
: .
: More Loongarch fixes from Lianmin Lv, fixing issues
: in the so called "dual-bridge" systems.
: .
irqchip/loongson-pch-pic: Fix pch_pic_acpi_init calling
irqchip/loongson-pch-pic: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent
irqchip/loongson-eiointc: Fix returned value on parsing MADT
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* irq/riscv-ipi:
: .
: RISC-V IPI rework from Anup Patel:
:
: "This series aims to improve IPI support in Linux RISC-V in following ways:
: 1) Treat IPIs as normal per-CPU interrupts instead of having custom RISC-V
: specific hooks. This also makes Linux RISC-V IPI support aligned with
: other architectures.
: 2) Remote TLB flushes and icache flushes should prefer local IPIs instead
: of SBI calls whenever we have specialized hardware (such as RISC-V AIA
: IMSIC and RISC-V SWI) which allows S-mode software to directly inject
: IPIs without any assistance from M-mode runtime firmware."
: .
irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers
RISC-V: Use IPIs for remote icache flush when possible
RISC-V: Use IPIs for remote TLB flush when possible
RISC-V: Allow marking IPIs as suitable for remote FENCEs
RISC-V: Treat IPIs as normal Linux IRQs
irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
RISC-V: Clear SIP bit only when using SBI IPI operations
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Remove support for the already no more supported stih415 and stih416
platforms. Remove as well the stid127 platform which never made it
up to the kernel.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230416190501.18737-1-avolmat@me.com
|
|
Rockchip RK3588/RK3588s GIC600 integration does not support the
sharability feature. Rockchip assigned Erratum ID #3588001 for this
issue.
Note, that the 0x0201743b ID is not Rockchip specific and thus
there is an extra of_machine_is_compatible() check.
The flags are named FORCE_NON_SHAREABLE to be vendor agnostic,
since apparently similar integration design errors exist in other
platforms and they can reuse the same flag.
Co-developed-by: XiaoDong Huang <derrick.huang@rock-chips.com>
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
Co-developed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Co-developed-by: Lucas Tanure <lucas.tanure@collabora.com>
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230418142109.49762-2-sebastian.reichel@collabora.com
|
|
Removing the include of cpu.h from of_device.h causes an error:
drivers/irqchip/irq-loongson-eiointc.c:420:9: error: implicit declaration of function 'cpuhp_setup_state_nocalls' [-Werror=implicit-function-declaration]
This driver doesn't even use DT, so all the DT includes can be dropped.
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-17-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Michael Walle <michael@walle.cc>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Talel Shenhar <talel@amazon.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Commit 5cac93b35c14 ("MIPS: Deprecate CONFIG_MIPS_CMP") deprecated
CONFIG_MIPS_CMP and after 9 years it's time to remove it.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
For dual-bridges scenario, pch_pic_acpi_init() will be called
in following path:
cpuintc_acpi_init
acpi_cascade_irqdomain_init(in cpuintc driver)
acpi_table_parse_madt
eiointc_parse_madt
eiointc_acpi_init /* this will be called two times
correspondingto parsing two
eiointc entries in MADT under
dual-bridges scenario*/
acpi_cascade_irqdomain_init(in eiointc driver)
acpi_table_parse_madt
pch_pic_parse_madt
pch_pic_acpi_init /* this will be called depend
on valid parent IRQ domain
handle for one or two times
corresponding to parsing
two pchpic entries in MADT
druring calling
eiointc_acpi_init() under
dual-bridges scenario*/
During the first eiointc_acpi_init() calling, the
pch_pic_acpi_init() will be called just one time since only
one valid parent IRQ domain handle will be found for current
eiointc IRQ domain.
During the second eiointc_acpi_init() calling, the
pch_pic_acpi_init() will be called two times since two valid
parent IRQ domain handles will be found. So in pch_pic_acpi_init(),
we must have a reasonable way to prevent from creating second same
pch_pic IRQ domain.
The patch matches gsi base information in created pch_pic IRQ
domains to check if the target domain has been created to avoid the
bug mentioned above.
Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-6-lvjianmin@loongson.cn
|
