| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"Apart for the normal updates for dt bindings, cleanups and support for
new device variants to existing drivers this completes the conversion
to pwmchip_alloc() which was started in the v6.9 development cycle.
Using pwmchip_alloc() is a precondition to the character device
support which allows easier and faster access to PWM devices. However
there are some issues I want to clean up before including it in
mainline, so this isn't contained here despite it was in next for some
time.
Thanks to Alexandre Mergnat, Binbin Zhou, Dmitry Rokosov, George
Stark, Jerome Brunet and Varshini Rajendran for their contributions.
Further thanks go to AngeloGioacchino Del Regno, Conor Dooley, David
Lechner, Fabrice Gasnier, Florian Fainelli, Guenter Roeck, Gustavo A.
R. Silva, Krzysztof Kozlowski and Rob Herring for valuable patch
review"
* tag 'pwm/for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (34 commits)
pwm: pca9685: Drop explicit initialization of struct i2c_device_id::driver_data to 0
dt-bindings: pwm: snps,dw-apb-timers: Do not require pwm-cells twice
dt-bindings: pwm: mediatek,pwm-disp: Do not require pwm-cells twice
dt-bindings: pwm: mediatek,mt2712: Do not require pwm-cells twice
dt-bindings: pwm: marvell,pxa: Do not require pwm-cells twice
dt-bindings: pwm: google,cros-ec: Do not require pwm-cells twice
dt-bindings: pwm: bcm2835: Do not require pwm-cells twice
pwm: meson: Use mul_u64_u64_div_u64() for frequency calculating
pwm: meson: Add check for error from clk_round_rate()
pwm: meson: Drop unneeded check in .get_state()
dt-bindings: pwm: mediatek,pwm-disp: add compatible for mt8365 SoC
pwm: meson: Add generic compatible for meson8 to sm1
pwm: bcm2835: Drop open coded variant of devm_clk_rate_exclusive_get()
pwm: bcm2835: Introduce a local variable for &pdev->dev
pwm: stm32: Calculate prescaler with a division instead of a loop
pwm: stm32: Fix for settings using period > UINT32_MAX
pwm: stm32: Improve precision of calculation in .apply()
pwm: stm32: Add error messages in .probe()'s error paths
pwm: Make pwmchip_[sg]et_drvdata() a wrapper around dev_set_drvdata()
pwm: Don't check pointer for being non-NULL after use
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Infineon XDP710
- EC Chip driver for Lenovo ThinkStation motherboards
- Analog Devices ADP1050
Improved support for existing drivers:
- emc1403: Convert to with_info API; Support for EMC1428 and EMC1438
- nzxt-kraken3: Support for NZXT Kraken 2023
- aquacomputer_d5next: Support for Octo flow sensors
- pmbus/adm1275: Support for ADM1281
- dell-smm: Supportt for Precision 7540 and G5 5505
Other notable cleanup:
- max6639: Use regmap
- Remove unused structure fields from multiple drivers
- Drop explicit initialization of struct i2c_device_id::driver_data
to zero
- Improve configuration mode handling in it87 driver
- jc42: Drop support for I2C_CLASS_SPD
- Various conversions to devicetree schema
- Add HAS_IOPORT dependencies as needed
Minor fixes and improvements to max31790, coretemp, aspeed-g6-pwm-tach,
pwm-fan, pmbus/mp2975, acpi_power_meter, and lm70 drivers"
* tag 'hwmon-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (52 commits)
hwmon: (nzxt-kraken3) Bail out for unsupported device variants
hwmon: (emc1403) Add support for EMC1428 and EMC1438.
hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0 (part 2)
hwmon: (emc1403) Add support for conversion interval configuration
hwmon: (emc1403) Support 11 bit accuracy
hwmon: (emc1403) Convert to with_info API
hwmon: (max6639) Use regmap
hwmon: (npcm750-pwm-fan) Remove another unused field in struct npcm7xx_cooling_device
hwmon: (npcm750-pwm-fan) Remove an unused field in struct npcm7xx_cooling_device
hwmon: (stts751) Remove an unused field in struct stts751_priv
hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0
hwmon: (max31790) revise the scale to write pwm
hwmon: (nzxt-kraken3) Add support for NZXT Kraken 2023 (standard and Elite) models
hwmon: (nzxt-kraken3) Decouple device names from kinds
hwmon: (it87) Remove tests nolonger required
hwmon: (it87) Test for chipset before entering configuration mode
hwmon: (it87) Do not enter configuration mode for some chiptypes
hwmon: (it87) Rename FEAT_CONF_NOEXIT to FEAT_NOCONF as more descriptive of requirement
hwmon: (pmbus) Add support for Infineon XDP710
dt-bindings: hwmon: Add infineon xdp710 driver bindings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's one API update here, a new API factoring out a common pattern
for reference voltage supplies. These are supplies used as a reference
by analogue circuits where the consumer requests and enables the
supply, reads the voltage to calibrate the user and then never touches
it again. This is factored out into a single operation which just
returns the voltage and uses devm_ to manage the request and enable
portion.
Otherwise this has been a very quiet release, we've got some new
device support, some small fixes, housekeeping and cleanup work but
nothing substantial.
There's also some non-regulator changes in here, a number of users for
the new reference voltage API were merged along with it and some MFD
changes were pulled in as dependencies for new driver work.
Highlights:
- Add a new API for single operation handling of reference voltages
- Support for Allwinner AXP717 and D1, and NXP PCA9561A"
* tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (33 commits)
regulator: sun20i: Add Allwinner D1 LDOs driver
regulator: dt-bindings: Add Allwinner D1 system LDOs
regulator: Mention regulator id in error message about dummy supplies
staging: iio: impedance-analyzer: ad5933: Use devm_regulator_get_enable_read_voltage()
iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage()
iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage()
hwmon: (adc128d818) simplify final return in probe
regulator: devres: fix devm_regulator_get_enable_read_voltage() return
hwmon: (da9052) Use devm_regulator_get_enable_read_voltage()
hwmon: (adc128d818) Use devm_regulator_get_enable_read_voltage()
regulator: devres: add API for reference voltage supplies
regulator: rtq2208: Fix LDO discharge register and add vsel setting
regulator: dt-bindings: fixed-regulator: Add a preferred node name
regulator: axp20x: add support for the AXP717
mfd: axp20x: Add support for AXP717 PMIC
dt-bindings: mfd: x-powers,axp152: Document AXP717
regulator: axp20x: fix typo-ed identifier
dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible
regulator: pca9450: add pca9451a support
regulator: dt-bindings: pca9450: add pca9451a support
...
|
|
Dan Carpenter reports:
Commit cbeb479ff4cd ("hwmon: (nzxt-kraken3) Decouple device names
from kinds") from Apr 28, 2024 (linux-next), leads to the following
Smatch static checker warning:
drivers/hwmon/nzxt-kraken3.c:957 kraken3_probe()
error: uninitialized symbol 'device_name'.
Indeed, 'device_name' will be uninitizalized if an unknown product is
encountered. In practice this should not matter because the driver
should not instantiate on unknown products, but lets play safe and
bail out if that happens.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-hwmon/b1738c50-db42-40f0-a899-9c027c131ffb@moroto.mountain/
Cc: Jonas Malaco <jonas@protocubo.io>
Cc: Aleksa Savic <savicaleksa83@gmail.com>
Fixes: cbeb479ff4cd ("hwmon: (nzxt-kraken3) Decouple device names from kinds")
Acked-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
EMC1428 and EMC1438 are similar to EMC14xx, but have eight temperature
channels, as well as signed data and limit registers. Chips currently
supported by this driver have unsigned registers only.
Signed-off-by: Lars Petter Mostad <larspm@gmail.com>
Link: https://lore.kernel.org/r/20240510142824.824332-1-lars.petter.mostad@appear.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
0 (part 2)
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
This is a follow up to commit d8a66f3621c2 ("hwmon: Drop explicit
initialization of struct i2c_device_id::driver_data to 0") which I
created before identifying a few corner cases in my conversion script.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240508072027.2119857-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Following the failure observed with a delay of 250us, experiments were
conducted with various delays. It was found that a delay of 350us
effectively mitigated the issue.
To provide a more optimal solution while still allowing a margin for
stability, the delay is being adjusted to 500us.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20240507194603.1305750-1-lakshmiy@us.ibm.com
Fixes: 8d655e6523764 ("hwmon: (ucd90320) Add minimum delay between bus accesses")
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The chips supported by the emc1403 driver support configurable
conversion rates. Add support for it.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Various temperature and limit registers support 11 bit accuracy.
Add support for it.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert driver to register with the hwmon subsystem using
devm_hwmon_device_register_with_info() instead of
devm_hwmon_device_register_with_groups() to simplify the code
and to reduce its size. As side effect, this also fixes a couple
of overflow problems when writing limit and hysteresis registers.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The final return in adc128d818_probe() can be simplified by using
PTR_ERR_OR_ZERO rather than an if statement.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240506-regulator-devm_regulator_get_enable_read_voltage-fixes-v1-2-356cdd152067@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Deduplicate sysfs ->show() callbacks which expose a string at a static
memory location. Use the newly introduced device_show_string() helper
in the driver core instead by declaring those sysfs attributes with
DEVICE_STRING_ATTR_RO().
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/23c2031acaa64f1c02f00e817c3f7e4466d17ab2.1713608122.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Through hidraw, userspace can cause a status report to be sent
from the device. The parsing in ccp_raw_event() may happen in
parallel to a send_usb_cmd() call (which resets the completion
for tracking the report) if it's running on a different CPU where
bottom half interrupts are not disabled.
Add a spinlock around the complete_all() in ccp_raw_event() and
reinit_completion() in send_usb_cmd() to prevent race issues.
Fixes: 40c3a4454225 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-4-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
ccp_raw_event()
In ccp_raw_event(), the ccp->wait_input_report completion is
completed once. Since we're waiting for exactly one report in
send_usb_cmd(), use complete_all() instead of complete()
to mark the completion as spent.
Fixes: 40c3a4454225 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Introduce cmd_buffer, a separate buffer for storing only
the command that is sent to the device. Before this separation,
the existing buffer was shared for both the command and the
report received in ccp_raw_event(), which was copied into it.
However, because of hidraw, the raw event parsing may be triggered
in the middle of sending a command, resulting in outputting gibberish
to the device. Using a separate buffer resolves this.
Fixes: 40c3a4454225 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add regmap support & remove local caching.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20240503120020.3450972-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
We can reduce boilerplate code by using
devm_regulator_get_enable_read_voltage().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240429-regulator-get-enable-get-votlage-v2-3-b1f11ab766c1@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We can reduce boilerplate code and eliminate the driver remove()
function by using devm_regulator_get_enable_read_voltage().
A new external_vref flag is added since we no longer have the handle
to the regulator to check if it is present.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240429-regulator-get-enable-get-votlage-v2-2-b1f11ab766c1@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
npcm7xx_cooling_device
In "struct npcm7xx_cooling_device", the 'pwm_clk_freq' field is only
written and never used.
Remove it and update npcm7xx_pwm_init() accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2ff738663d40ac5ae3d0b4d2e688ff7e36032be8.1714505655.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In "struct npcm7xx_cooling_device", the 'fan_clk_freq' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/74eee8aa739f94b8c6425ce3e37a427ca92243ea.1714505655.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In "struct stts751_priv", the 'smbus_timeout' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/94ccf9caaa6b0101351bf381f09f4428c5e0835c.1714511322.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240430085654.1028864-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Since the value for PWMOUT Target Duty Cycle register is a 9 bit
left-justified value that ranges from 0 to 511 and is contained in 2
bytes.
There is an issue that the PWM signal recorded by oscilloscope would
not be on consistently if we set PWM to 100% to the driver.
It is because the LSB of the 9 bit would always be zero if it just
left shift 8 bit for the value that write to PWMOUT Target Duty
Cycle register.
Therefore, revise the scale of the value that was written to pwm input
from 255 to 511 and modify the value to left-justified value.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://lore.kernel.org/r/20240416022211.859483-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
models
Add support for NZXT Kraken 2023 (standard) and NZXT Kraken 2023 Elite
all-in-one CPU coolers. These models communicate identically to the NZXT
Kraken Z-series (Z53 code paths) in all cases except when writing the
fan curve, where setting additional bits in the report is needed.
Reviewed-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240428104812.14037-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Prepare for the support of new models, for which the relationship
between device name (for hwmon and debugfs) and kind (for the selection
of appropriate code paths within this driver) will no longer be 1:1.
Originally-from: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240428104812.14037-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Remove DMI tests for boards that are known to have issues with entering
configuration mode, as now we are testing the chips directly and no
longer need to rely on matching the board.
Leave the DMI table in place, for the nVIDIA board, and any future
expansions.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20240428060653.2425296-5-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Major part of the change for the new method to avoid chipset issues.
The actual update does the following:
1) Lock the memory, but does not perform a SIO entry (previously it
would have performed an SIO entry).
2) Attempt to read the chipID. This should be safe no matter which
chip we have.
3) If step (2) fails, then perform SIO entry and retry chipID read. For
older chips and on failure it acts similarly to prior to this patch.
4) Set the sio_data->type, similar to previously.
5) If we have not performed an SIO entry, and this is not a chip type
with the NOCONF feature, then it will perform an SIO entry at this
point.
6) Proceed with setup as prior to this patch.
7) Any following access to the SIO registers will invoke the SIO entry
and SIO exit steps unless it is a chip with the NOCONF feature set.
This was set up in the previous patches in this patchset.
8) Update to the exit based on if it had performed a SIO entry or not.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20240428060653.2425296-4-frank@crawford.emu.id.au
[groeck: s/intialised/initialized/]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Update the configuration mode entry code to allow conditional entry, and
apply to all calls.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20240428060653.2425296-3-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
requirement
Rename previous definitions to match the new information that they are
preinitialised as enabled and should not receive codes to enter or exit
configuration mode.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20240428060653.2425296-2-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for Infineon XDP710.This is a Hot-Swap Controller.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240425153608.4003782-2-peteryin.openbmc@gmail.com
[groeck: s/microOhmRsense/micro_ohm_osense/g; declared array static]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for reading and writing the flow sensor pulses on
the Aquacomputer Octo. Implemented by David Flemstrom [1].
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/95
Originally-from: David Flemstrom <david.flemstrom@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240417175037.32499-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for reading the flow sensor value on
the Aquacomputer Octo. Implemented by David Flemstrom [1].
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/95
Originally-from: David Flemstrom <david.flemstrom@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240417175037.32499-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This addition adds in the ability for the system to scan
the EC chip in the Lenovo ThinkStation systems to get the
current fan RPM speeds the Maximum speed value for each
fan also provides the CPU, DIMM other thermal statuses
Signed-off-by: David Ober <dober6023@gmail.com>
Link: https://lore.kernel.org/r/20240328121250.331146-1-dober6023@gmail.com
[groeck: Dropped pointless case statements]
[Colin King: Fixed spelling error accesssible -> accessible]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for adm1281 which is similar to adm1275 and other chips
of the series.
Signed-off-by: Jose Ramon San Buenaventura <jose.sanbuenaventura@analog.com>
Link: https://lore.kernel.org/r/20240425070948.25788-3-jose.sanbuenaventura@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The Intel Software Development manual defines the temperature digital
readout as the bits [22:16] of the IA32_[PACKAGE]_THERM_STATUS registers.
Bit 23 is specified as reserved.
In recent processors, however, the temperature digital readout uses bits
[23:16]. In those processors, using the bitmask 0x7f would lead to
incorrect readings if the temperature deviates from TjMax by more than
127 degrees Celsius.
Although not guaranteed, bit 23 is likely to be 0 in processors from a few
generations ago. The temperature reading would still be correct in those
processors when using a 0xff bitmask.
Model-specific provisions can be made for older processors in which bit 23
is not 0 should the need arise.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://lore.kernel.org/r/20240425171311.19519-4-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Last host driver supporting I2C_CLASS_SPD was i801. Now that I2C_CLASS_SPD
support has been removed there, we can remove it here too.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/3c4a1715-bfbb-4ae2-b35f-2f20f95e4932@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20240409085552.19868-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Add mod_devicetable.h include.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240404191323.3547465-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This is a preparatory change to fulfill further conversion
the driver to be OF-independent. The independent code has
no analogue API that can read the value by index in the device
property array.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240404191323.3547465-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20240404124700.3807842-2-schnelle@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use preferred i2c_get_match_data() instead of of_device_get_match_data()
to get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325120952.3019767-4-andriy.shevchenko@linux.intel.com
[groeck: Dropped __maybe_unused from mp2975_of_match]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Constify the local variables pointing to "struct pmbus_driver_info" and
other encoding params to annotate the function is not modifying pointed
data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325120952.3019767-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The newly introduced SWAP() macro is quite generic by naming, but
moreover it's a repetition of the existing __assign_bit().
With this applied, add a missing bits.h (via now required bitops.h).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325120952.3019767-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325124156.3036266-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add Precision 7540 to the fan control whitelist, in addition to 7510.
Signed-off-by: Seiji Nishikawa <snishika@redhat.com>
Link: https://lore.kernel.org/r/20240325045913.385853-2-snishika@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for ADP1050 Digital Controller for Isolated Power Supplies
with PMBus interface Voltage, Current and Temperature Monitor.
The ADP1050 implements several features to enable a robust
system of parallel and redundant operation for customers who
require high availability. The device can measure voltage,
current and temperature that can be used in different
techniques to identify and safely shut down an erroneous
power supply in parallel operation mode.
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Link: https://lore.kernel.org/r/20240321142201.10330-2-radu.sabau@analog.com
[groeck: Fixed corrupted link in documentation]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The following error can be observed at boot:
[ 3.717920] ACPI Error: No handler for Region [SYSI] (00000000ab9e62c5) [IPMI] (20230628/evregion-130)
[ 3.717928] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261)
[ 3.717936] No Local Variables are initialized for Method [_GHL]
[ 3.717938] No Arguments are initialized for method [_GHL]
[ 3.717940] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[ 3.717949] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[ 3.717957] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST
On Dell systems several methods of acpi_power_meter access variables in
IPMI region [0], so wait until IPMI space handler is installed by
acpi_ipmi and also wait until SMI is selected to make the space handler
fully functional.
Since the dependency is inside BIOS's ASL code and it's not
discoverable, so use this fixup is a hack to workaround BIOS issue.
[0] https://www.dell.com/support/manuals/en-us/redhat-enterprise-linux-v8.0/rhel8_rn_pub/advanced-configuration-and-power-interface-acpi-error-messages-displayed-in-dmesg?guid=guid-0d5ae482-1977-42cf-b417-3ed5c3f5ee62
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20240320084317.366853-2-kai.heng.feng@canonical.com
[groeck: Simplified added code]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Update links in the documentation and in-code comments which point to
the datasheet.
The current links don't work because National Semiconductor (which is the
original manufacturer of this chip) has been a part of Texas Instruments
since 2011 and http://www.national.com/ doesn't work anymore.
Fixes: e1a8e913f97e ("[PATCH] lm70: New hardware monitoring driver")
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Link: https://lore.kernel.org/r/20240318154540.90613-3-five231003@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The MP2971/MP2973 use a custom 16bit register format for
SMBALERT_MASK which doesn't follow the PMBUS specification.
Map the PMBUS defined bits used by the common code onto the custom
format used by MPS and since the SMBALERT_MASK is currently never read
by common code only implement the mapping for write transactions.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20240318174406.3782306-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Enables reading the speed of the CPU and GPU fan on the G5.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240310220710.896230-1-tjakobi@math.uni-bielefeld.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This prepares the aspeed-g6-pwm-tacho driver to further changes of the
pwm core outlined in the commit introducing devm_pwmchip_alloc(). There
is no intended semantical change and the driver should behave as before.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/e95e41eea5a138ae206c9116ba3cb1d9e0178284.1710777536.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/5c6a11dd10cd29e0f7bfaa1fdef145523347cb58.1710777536.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- New acer-wmi HW support
- Support for new revision of amd/pmf heartbeat notify
- Correctly handle asus-wmi HW without LEDs
- fujitsu-laptop battery charge control support
- Support for new hp-wmi thermal profiles
- Support ideapad-laptop refresh rate key
- Put intel/pmc AI accelerator (GNA) into D3 if it has no driver to
allow entry into low-power modes, and temporarily removed Lunar Lake
SSRAM support due to breaking FW changes causing probe fail (further
breaking FW changes are still pending)
- Report pmc/punit_atom devices that prevent reacing low power levels
- Surface Fan speed function support
- Support for more sperial keys and complete the list of models with
non-standard fan registers in thinkpad_acpi
- New DMI touchscreen HW support
- Continued modernization efforts of wmi
- Removal of obsoleted ledtrig-audio call and the related dependency
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits)
platform/x86/intel/pmc: Improve PKGC residency counters debug
platform/x86: asus-wmi: Consider device is absent when the read is ~0
Documentation/x86/amd/hsmp: Updating urls
platform/mellanox: mlxreg-hotplug: Remove redundant NULL-check
platform/x86/amd/pmf: Update sps power thermals according to the platform-profiles
platform/x86/amd/pmf: Add support to get sps default APTS index values
platform/x86/amd/pmf: Add support to get APTS index numbers for static slider
platform/x86/amd/pmf: Add support to notify sbios heart beat event
platform/x86/amd/pmf: Add support to get sbios requests in PMF driver
platform/x86/amd/pmf: Disable debugfs support for querying power thermals
platform/x86/amd/pmf: Differentiate PMF ACPI versions
x86/platform/atom: Check state of Punit managed devices on s2idle
platform/x86: pmc_atom: Check state of PMC clocks on s2idle
platform/x86: pmc_atom: Check state of PMC managed devices on s2idle
platform/x86: pmc_atom: Annotate d3_sts register bit defines
clk: x86: Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h
platform/x86: make fw_attr_class constant
platform/x86/intel/tpmi: Change vsec offset to u64
platform/x86: intel_scu_pcidrv: Remove unused intel-mid.h
platform/x86: intel_scu_wdt: Remove unused intel-mid.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Amphenol ChipCap 2
- ASPEED g6 PWM/Fan tach
- Astera Labs PT5161L retimer
- ASUS ROG RYUJIN II 360 AIO cooler
- LTC4282
- Microsoft Surface devices
- MPS MPQ8785 Synchronous Step-Down Converter
- NZXT Kraken X and Z series AIO CPU coolers
Additional chip support in existing drivers:
- Ayaneo Air Plus 7320u (oxp-sensors)
- INA260 (ina2xx)
- XPS 9315 (dell-smm)
- MSI customer ID (nct6683)
Devicetree bindings updates:
- Common schema for hardware monitoring devices
- Common schema for fans
- Update chip descriptions to use common schema
- Document regulator properties in several drivers
- Explicit bindings for infineon buck converters
Other improvements:
- Replaced rbtree with maple tree register cache in several drivers
- Added support for humidity min/max alarm and volatage fault
attributes to hwmon core
- Dropped non-functional I2C_CLASS_HWMON support for drivers w/o
detect()
- Dropped obsolete and redundant entried from MAINTAINERS
- Cleaned up axi-fan-control and coretemp drivers
- Minor fixes and improvements in several other drivers"
* tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits)
hwmon: (dell-smm) Add XPS 9315 to fan control whitelist
hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
dt-bindings: hwmon: fan: Add fan binding to schema
dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
hwmon: (amc6821) add of_match table
dt-bindings: hwmon: lm75: use common hwmon schema
hwmon: (sis5595) drop unused DIV_TO_REG function
dt-bindings: hwmon: reference common hwmon schema
dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
dt-bindings: hwmon: adi,adm1275: use common hwmon schema
dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
dt-bindings: hwmon: add common properties
hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator
regulator: dt-bindings: promote infineon buck converters to their own binding
dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
MAINTAINERS: Drop redundant hwmon entries
...
|
|
Many older WMI drivers cannot be instantiated multiple times for
two reasons:
- they are using the legacy GUID-based WMI API
- they are singletons (with global state)
Prevent such WMI drivers from binding to WMI devices with a duplicated
GUID, as this would mean that the WMI driver will be instantiated at
least two times (one for the original GUID and one for the duplicated
GUID).
WMI drivers which can be instantiated multiple times can signal this
by setting a flag inside struct wmi_driver.
Tested on a ASUS Prime B650-Plus.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240226193557.2888-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
"Rework of APIC enumeration and topology evaluation.
The current implementation has a couple of shortcomings:
- It fails to handle hybrid systems correctly.
- The APIC registration code which handles CPU number assignents is
in the middle of the APIC code and detached from the topology
evaluation.
- The various mechanisms which enumerate APICs, ACPI, MPPARSE and
guest specific ones, tweak global variables as they see fit or in
case of XENPV just hack around the generic mechanisms completely.
- The CPUID topology evaluation code is sprinkled all over the vendor
code and reevaluates global variables on every hotplug operation.
- There is no way to analyze topology on the boot CPU before bringing
up the APs. This causes problems for infrastructure like PERF which
needs to size certain aspects upfront or could be simplified if
that would be possible.
- The APIC admission and CPU number association logic is
incomprehensible and overly complex and needs to be kept around
after boot instead of completing this right after the APIC
enumeration.
This update addresses these shortcomings with the following changes:
- Rework the CPUID evaluation code so it is common for all vendors
and provides information about the APIC ID segments in a uniform
way independent of the number of segments (Thread, Core, Module,
..., Die, Package) so that this information can be computed instead
of rewriting global variables of dubious value over and over.
- A few cleanups and simplifcations of the APIC, IO/APIC and related
interfaces to prepare for the topology evaluation changes.
- Seperation of the parser stages so the early evaluation which tries
to find the APIC address can be seperately overridden from the late
evaluation which enumerates and registers the local APIC as further
preparation for sanitizing the topology evaluation.
- A new registration and admission logic which
- encapsulates the inner workings so that parsers and guest logic
cannot longer fiddle in it
- uses the APIC ID segments to build topology bitmaps at
registration time
- provides a sane admission logic
- allows to detect the crash kernel case, where CPU0 does not run
on the real BSP, automatically. This is required to prevent
sending INIT/SIPI sequences to the real BSP which would reset
the whole machine. This was so far handled by a tedious command
line parameter, which does not even work in nested crash
scenarios.
- Associates CPU number after the enumeration completed and
prevents the late registration of APICs, which was somehow
tolerated before.
- Converting all parsers and guest enumeration mechanisms over to the
new interfaces.
This allows to get rid of all global variable tweaking from the
parsers and enumeration mechanisms and sanitizes the XEN[PV]
handling so it can use CPUID evaluation for the first time.
- Mopping up existing sins by taking the information from the APIC ID
segment bitmaps.
This evaluates hybrid systems correctly on the boot CPU and allows
for cleanups and fixes in the related drivers, e.g. PERF.
The series has been extensively tested and the minimal late fallout
due to a broken ACPI/MADT table has been addressed by tightening the
admission logic further"
* tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
x86/topology: Ignore non-present APIC IDs in a present package
x86/apic: Build the x86 topology enumeration functions on UP APIC builds too
smp: Provide 'setup_max_cpus' definition on UP too
smp: Avoid 'setup_max_cpus' namespace collision/shadowing
x86/bugs: Use fixed addressing for VERW operand
x86/cpu/topology: Get rid of cpuinfo::x86_max_cores
x86/cpu/topology: Provide __num_[cores|threads]_per_package
x86/cpu/topology: Rename topology_max_die_per_package()
x86/cpu/topology: Rename smp_num_siblings
x86/cpu/topology: Retrieve cores per package from topology bitmaps
x86/cpu/topology: Use topology logical mapping mechanism
x86/cpu/topology: Provide logical pkg/die mapping
x86/cpu/topology: Simplify cpu_mark_primary_thread()
x86/cpu/topology: Mop up primary thread mask handling
x86/cpu/topology: Use topology bitmaps for sizing
x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT
x86/xen/smp_pv: Count number of vCPUs early
x86/cpu/topology: Assign hotpluggable CPUIDs during init
x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug
x86/topology: Add a mechanism to track topology via APIC IDs
...
|
|
A user reported that on this machine, disabling BIOS fan control
is necessary in order to change the fan speed.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240309212025.13758-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The driver support two functions: PWM and Tachometer. The PWM feature can
handle up to 16 output ports, while the Tachometer can monitor to up to 16
input ports as well. This driver implements them by exposing two kernel
subsystems: PWM and HWMON. The PWM subsystem can be utilized alongside
existing drivers for controlling elements such as fans (pwm-fan.c),
beepers (pwm-beeper.c) and so on. Through the HWMON subsystem, the driver
provides sysfs interfaces for fan.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20240221104025.1306227-4-billy_tsai@aspeedtech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add of_match table for "ti,amc6821" compatible string.
This fixes automatic driver loading by userspace when using device-tree,
and if built as a module like major linux distributions do.
While devices probe just fine with i2c_device_id table, userspace can't
match the "ti,amc6821" compatible string from dt with the plain
"amc6821" device id. As a result, the kernel module can not be loaded.
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240307-amc6821-of-match-v1-1-5f40464a3110@solid-run.com
[groeck: Cleaned up patch description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Found with git grep 'MODULE_AUTHOR(".*([^)]*@'
Fixed with
sed -i '/MODULE_AUTHOR(".*([^)]*@/{s/ (/ </g;s/)"/>"/;s/)and/> and/}' \
$(git grep -l 'MODULE_AUTHOR(".*([^)]*@')
Also:
in drivers/media/usb/siano/smsusb.c normalise ", INC" to ", Inc";
this is what every other MODULE_AUTHOR for this company says,
and it's what the header says
in drivers/sbus/char/openprom.c normalise a double-spaced separator;
this is clearly copied from the copyright header,
where the names are aligned on consecutive lines thusly:
* Linux/SPARC PROM Configuration Driver
* Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
but the authorship branding is single-line
Link: https://lkml.kernel.org/r/mk3geln4azm5binjjlfsgjepow4o73domjv6ajybws3tz22vb3@tarta.nabijaczleweli.xyz
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'DIV_TO_REG' function is not used:
sis5595.c:159:18: error: unused function 'DIV_TO_REG' [-Werror,-Wunused-function]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240225202841.60740-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
If a chip only provides a single regulator, it should be named 'vout'
and not 'vout0'. Declare regulator using PMBUS_REGULATOR_ONE() to make
that happen.
Cc: Conor Dooley <conor@kernel.org>
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Cc: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223-harmless-covenant-9cd3d4f1cfd2@spud
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
If a chip only provides a single regulator, it should be named 'vout'
and not 'vout0'. Declare regulator using PMBUS_REGULATOR_ONE() to make
that happen.
Cc: Conor Dooley <conor@kernel.org>
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Cc: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223-player-buckskin-01405c5889c4@spud
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
If a chip only provides a single regulator, it should be named 'vout'
and not 'vout0'. Declare regulator using PMBUS_REGULATOR_ONE() to make
that happen.
Cc: Conor Dooley <conor@kernel.org>
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Cc: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223-catnap-companion-c42fdd8ad110@spud
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use dev_err_probe() to slightly simplify printing errors during probe.
No functional changes intended.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240214-axi-fan-control-no-of-v1-3-43ca656fe2e3@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use sysfs_emit() instead of directly call sprintf().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240214-axi-fan-control-no-of-v1-2-43ca656fe2e3@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Don't directly use OF and use device property APIs. In addition, this
makes the probe() code neater and also allow us to move the
of_device_id table to it's natural place.
While at it, make sure to explicitly include mod_devicetable.h for the
of_device_id table.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240214-axi-fan-control-no-of-v1-1-43ca656fe2e3@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for handheld AYANEO AIR Plus with the same EC registers
to add proper fan control.
Functionality was tested successfully.
Signed-off-by: Sebastian Kranz <tklightforce@googlemail.com>
Link: https://lore.kernel.org/r/20240209090157.3232-1-tklightforce@googlemail.com
[groeck: Fixed up commit message]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The return path can be improved by returning upon first failure. The
current implementation would try to register the second interrupt even
if the first one failed, which is unnecessary.
Moreover, if no irqs are available, the return value should be zero
(the driver supports the use case with no interrupts). Currently the
initial value is unassigned and that may lead to returning an unknown
value if stack variables are not automatically set to zero and no irqs
were provided.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-hwmon/294e4634-89d4-415e-a723-b208d8770d7c@gmail.com/T/#t
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240207-chipcap2_init_vars-v1-2-08cafe43e20e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The reg_val variable in cc2_get_reg_val() might be used without a known
value if cc2_read_reg() fails. That leads to a useless data conversion
because the returned error means the read operation failed and the data is
not relevant.
That makes its initial value irrelevant as well, so skip the data
conversion instead. If no error happens, a value is assigned to reg_val
and the data conversion is required.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-hwmon/294e4634-89d4-415e-a723-b208d8770d7c@gmail.com/T/#t
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240207-chipcap2_init_vars-v1-1-08cafe43e20e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This driver implements support for temperature monitoring of Astera Labs
PT5161L series PCIe retimer chips.
This driver implementation originates from the CSDK available at
Link: https://github.com/facebook/openbmc/tree/helium/common/recipes-lib/retimer-v2.14
The communication protocol utilized is based on the I2C/SMBus standard.
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Link: https://lore.kernel.org/r/20240206125420.3884300-2-chou.cosmo@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The total memory needed for saving per core temperature data depends on
the number of cores in a package. Using static allocated memory wastes
memories on systems with low per package core count.
Improve the code to use dynamic allocated memory so that it can be
improved further when per package core count information becomes
available.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-12-rui.zhang@intel.com
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
temp_data->index saves the index in pdata->core_data[]. It is not used
by package temp_data.
Use temp_data->index as the indicator of package temp_data and remove
redundant temp_data->is_pkg_data.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-11-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Saving package temp_data and core temp_data in one array with different
offsets is fragile.
Split them and clean up crabbed maths and macros. This also fixes a
problem that pdata->core_data[0] was never used.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-10-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
coretemp driver has an obscure and fragile logic for handling package
and core temperature data.
Place the logic in newly introduced helpers for further optimizations.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-9-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
pdata->cpu_map[] saves the mapping between cpu core id and the index in
pdata->core_data[]. This is used to find the temp_data structure using
cpu_core_id, by traversing the pdata->cpu_map[] array. But the same goal
can be achieved by traversing the pdata->core_temp[] array directly.
Remove redundant pdata->cpu_map[].
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-8-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Replace sensor_device_attribute with device_attribute because
sensor_device_attribute->index is no longer used.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-7-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When sensor_device_attribute pointer is available, use container_of() to
get the temp_data address.
This removes the unnecessary dependency of cached index in
pdata->core_data[].
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-6-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Introduce enum coretemp_attr_index to better describe the index of each
sensor attribute.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-5-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This driver exposes hardware sensors of the ASUS ROG RYUJIN II 360
all-in-one CPU liquid cooler, which communicates through a proprietary
USB HID protocol. Report offsets were initially discovered in [1] by
Florian Freudiger.
Available sensors are pump, internal and external
(controller) fan speed in RPM, their duties in PWM, as well as
coolant temperature.
Attaching external fans to the controller is optional and allows them
to be controlled from the device. If not connected, the fan-related
sensors will report zeroes. The controller is a separate hardware unit
that comes bundled with the AIO and connects to it to allow fan control.
The addressable LCD screen is not supported in this
driver and should be controlled through userspace tools.
[1]: https://github.com/liquidctl/liquidctl/pull/653
Tested-by: Florian Freudiger <florian.freudiger@proton.me>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240108094453.22986-1-savicaleksa83@gmail.com
[groeck: Add HID dependency]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This driver enables hardware monitoring support for NZXT Kraken
X53/X63/X73 and Z53/Z63/Z73 all-in-one CPU liquid coolers.
All models expose liquid temperature and pump speed (in RPM), as well as
PWM control (natively only through a temp-PWM curve, but the driver also
emulates fixed PWM control on top of that). The Z-series models
additionally expose the speed and duty of an optionally connected fan,
with the same PWM control capabilities.
Pump and fan duty control mode can be set through pwm[1-2]_enable,
where 1 is for the manual control mode and 2 is for the liquid temp
to PWM curve mode. Writing a 0 disables control of the channel through
the driver after setting its duty to 100%. As it is not possible to query
the device for the active mode, the driver keeps track of it.
The temperature of the curves relates to the fixed [20-59] C range, per
device limitations, and correlating to the detected liquid temperature.
Only PWM values (ranging from 0-255) can be set.
The addressable RGB LEDs and LCD screen, included only on Z-series models,
are not supported in this driver.
Co-developed-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Jonas Malaco <jonas@protocubo.io>
Co-developed-by: Yury Zhuravlev <stalkerg@gmail.com>
Signed-off-by: Yury Zhuravlev <stalkerg@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240129111932.368232-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The Amphenol ChipCap 2 is a capacitive polymer humidity and temperature
sensor with an integrated EEPROM and minimum/maximum humidity alarms.
All device variants offer an I2C interface and depending on the part
number, two different output modes:
- CC2D: digital output
- CC2A: analog (PDM) output
This driver adds support for the digital variant (CC2D part numbers),
which includes the following part numbers:
- non-sleep measurement mode (CC2D23, CC2D25, CC2D33, CC2D35)
- sleep measurement mode (CC2D23S, CC2D25S, CC2D33S, CC2D35S)
The Chipcap 2 EEPROM can be accessed to configure a series of parameters
like the minimum/maximum humidity alarm threshold and hysteresis. The
EEPROM is only accessible in the command window after a power-on reset.
The default window lasts 10 ms if no Start_CM command is sent. After the
command window is finished (either after the mentioned timeout of after
a Start_NOM command is sent), the device enters the normal operation
mode and makes a first measurement automatically.
Unfortunately, the device does not provide any hardware or software
reset and therefore the driver must trigger power cycles to enter the
command mode. A dedicated, external regulator is required for that.
This driver keeps the device off until a measurement or access to the
EEPROM is required, making use of the first automatic measurement to
avoid different code paths for sleep and non-sleep devices.
The minimum and maximum humidity alarms are configured with two
registers per alarm: one stores the alarm threshold and the other one
keeps the value that turns off the alarm. The alarm signals are only
updated when a measurement is carried out.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240130-topic-chipcap2-v6-5-260bea05cf9b@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add min_alarm and max_alarm attributes for humidityX to support devices
that can generate these alarms.
Such attributes already exist for other magnitudes such as tempX.
Tested with a ChipCap 2 temperature-humidity sensor.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240130-topic-chipcap2-v6-2-260bea05cf9b@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202072235.41614-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202072039.41419-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202072007.41316-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202071927.41213-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202071800.41113-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202071628.40990-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202071538.40877-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202071452.40778-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202071355.40666-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The temperature/humidity sensors of the STS3x/SHT3x family are
calibrated and factory-programmed with a unique serial number.
For some sensors, this serial number can be used to obtain a calibration
certificate via an API provided by the manufacturer (Sensirion).
Expose the serial number via debugfs.
Tested with: 2x STS31, 1x STS32, 1x SHT31
Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>
Link: https://lore.kernel.org/r/20240131111512.25321-2-code@stefan-gloor.ch
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for mpq8785 device from Monolithic Power Systems, Inc.
(MPS) vendor. This is synchronous step-down controller.
Signed-off-by: Charles Hsu <ythsu0511@gmail.com>
Link: https://lore.kernel.org/r/20240131074822.2962078-2-ythsu0511@gmail.com
[groeck: probe_new --> probe; add MODULE_IMPORT_NS(PMBUS)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Adds a driver that provides read only access to the fan speed for Microsoft
Surface Pro devices. The fan speed is always regulated by the EC and cannot
be influenced directly.
Signed-off-by: Ivor Wanders <ivor@iwanders.net>
Link: https://github.com/linux-surface/kernel/pull/144
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240131005856.10180-2-ivor@iwanders.net
[groeck:
- Declare surface_fan_hwmon_is_visible() static
- Add dependency on SURFACE_AGGREGATOR_BUS
]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The LTC4282 hot swap controller allows a board to be safely inserted and
removed from a live backplane. Using one or more external N-channel pass
transistors, board supply voltage and inrush current are ramped up at an
adjustable rate. An I2C interface and onboard ADC allows for monitoring
of board current, voltage, power, energy and fault status.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240129-b4-ltc4282-support-v4-3-fe75798164cc@analog.com
[groeck: clamp value range in ltc4282_write_voltage_byte_cached()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The number of temperature configuration registers does
not always match the total number of temperature registers.
This can result in access errors reported if KASAN is enabled.
BUG: KASAN: global-out-of-bounds in nct6775_probe+0x5654/0x6fe9 nct6775_core
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/linux-hwmon/d51181d1-d26b-42b2-b002-3f5a4037721f@roeck-us.net/
Fixes: b7f1f7b2523a ("hwmon: (nct6775) Additional TEMP registers for nct6799")
Cc: Ahmad Khalifa <ahmad@khalifa.ws>
Tested-by: Ahmad Khalifa <ahmad@khalifa.ws>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Now that __num_cores_per_package and __num_threads_per_package are
available, cpuinfo::x86_max_cores and the related math all over the place
can be replaced with the ready to consume data.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.176147806@linutronix.de
|
|
The plural of die is dies.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.065874205@linutronix.de
|
|
Sometimes a voltage channel might have an hard failure (eg: a shorted
MOSFET). Hence, add a fault attribute to report such failures.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240129-b4-ltc4282-support-v4-2-fe75798164cc@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use _pmbus_write_word_data to allow intercepting writes to
PMBUS_SMBALERT_MASK in the custom chip specific code.
This is required for MP2971/MP2973 which doesn't follow the
PMBUS specification for PMBUS_SMBALERT_MASK.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20240130152903.3651341-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Class-based I2C probing requires detect() and address_list both
to be set in the I2C client driver, see checks in i2c_detect().
It's misleading to declare I2C_CLASS_HWMON support if the driver
doesn't implement detect().
Class-based probing is a legacy mechanism, in addition apparently
nobody ever noticed that class-based probing has been non-functional
in both drivers from the very beginning. So drop the fragments of
class-based probing support.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/13ce7c11-a958-4892-ada9-faf5bfdcb89d@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Class-based I2C probing requires detect() and address_list to be
set in the I2C client driver, see checks in i2c_detect().
It's misleading to declare I2C_CLASS_HWMON support if this
precondition isn't met.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/75747c6a-d414-4b07-8f66-5a5cdddc3c36@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This value was found on an MSI PRO X670-P WIFI with an NCT6687D chip.
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Link: https://lore.kernel.org/r/CAO3ALPwot01+bBisj7Roog7SD9UwV+y4NtiakKrBDE0tPvFhbw@mail.gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Currently, coretemp driver supports only 128 cores per package.
This loses some core temperature information on systems that have more
than 128 cores per package.
[ 58.685033] coretemp coretemp.0: Adding Core 128 failed
[ 58.692009] coretemp coretemp.0: Adding Core 129 failed
...
Enlarge the limitation to 512 because there are platforms with more than
256 cores per package.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-4-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Before commit 7108b80a542b ("hwmon/coretemp: Handle large core ID
value"), there is a fixed mapping between
1. cpu_core_id
2. the index in pdata->core_data[] array
3. the sysfs attr name, aka "tempX_"
The later two always equal cpu_core_id + 2.
After the commit, pdata->core_data[] index is got from ida so that it
can handle sparse core ids and support more cores within a package.
However, the commit erroneously maps the sysfs attr name to
pdata->core_data[] index instead of cpu_core_id + 2.
As a result, the code is not aligned with the comments, and brings user
visible changes in hwmon sysfs on systems with sparse core id.
For example, before commit 7108b80a542b ("hwmon/coretemp: Handle large
core ID value"),
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon3/temp10_label:Core 8
/sys/class/hwmon/hwmon3/temp11_label:Core 9
after commit,
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon2/temp7_label:Core 8
/sys/class/hwmon/hwmon2/temp8_label:Core 9
Restore the previous behavior and rework the code, comments and variable
names to avoid future confusions.
Fixes: 7108b80a542b ("hwmon/coretemp: Handle large core ID value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-3-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix a bug that pdata->cpu_map[] is set before out-of-bounds check.
The problem might be triggered on systems with more than 128 cores per
package.
Fixes: 7108b80a542b ("hwmon/coretemp: Handle large core ID value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240202092144.71180-2-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
the ASPEED_PTCR_RESULT Register can only hold the result for a
single fan input. Adding a mutex to protect the register until the
reading is done.
Signed-off-by: Loic Prylli <lprylli@netflix.com>
Signed-off-by: Alexander Hansen <alexander.hansen@9elements.com>
Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Link: https://lore.kernel.org/r/121d888762a1232ef403cf35230ccf7b3887083a.1699007401.git.alexander.hansen@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The current driver code no longer perfrom internal conversion from
VID to direct. Instead it configures READ_VOUT using MFR_DC_LOOP_CTRL.
Correct the comment message inside the 'mp2975_read_byte_data'
function to match the driver logic.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Fixes: c60fe56c169e ("hwmon: (pmbus/mp2975) Fix driver initialization for MP2975 device")
Link: https://lore.kernel.org/r/20240127154844.989-1-aladyshev22@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The commit 1feb31e810b0 ("hwmon: (pmbus/mp2975) Simplify VOUT code")
has introduced a bug that makes it impossible to initialize MP2975
device:
"""
mp2975 5-0020: Failed to identify chip capabilities
i2c i2c-5: new_device: Instantiated device mp2975 at 0x20
i2c i2c-5: delete_device: Deleting device mp2975 at 0x20
"""
Since the 'read_byte_data' function was removed from the
'pmbus_driver_info ' structure the driver no longer reports correctly
that VOUT mode is direct. Therefore 'pmbus_identify_common' fails
with error, making it impossible to initialize the device.
Restore 'read_byte_data' function to fix the issue.
Tested:
- before: it is not possible to initialize MP2975 device with the
'mp2975' driver,
- after: 'mp2975' correctly initializes MP2975 device and all sensor
data is correct.
Fixes: 1feb31e810b0 ("hwmon: (pmbus/mp2975) Simplify VOUT code")
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Link: https://lore.kernel.org/r/20240126205714.2363-1-aladyshev22@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Goto 'unlock_and_return' for unlocking before returning on the error
path.
Fixes: d5939a793693 ("hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolers")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240122154952.2851934-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
nuvoton,npcm750-pwm-fan
Commit 89fec128d5d1 ("hwmon: (npcm750-pwm-fan) Add NPCM8xx support")
introduced support for PWM fans on Nuvoton's npcm845 SoC. This chip
supports three PWM modules with four PWM channels each. The older npcm750
only supported two PWM modules. The commit did not take into account that
the older SoC only supported two PWM modules. This results in a crash if
npcm750 is instantiated when the code attempts to instantiate the
non-existing third PWM module.
Unable to handle kernel paging request at virtual address e0aa2000 when write
[e0aa2000] *pgd=04ab6811, *pte=00000000, *ppte=00000000
Internal error: Oops: 807 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G N 6.7.0-next-20240112-dirty #3
Hardware name: NPCM7XX Chip family
PC is at npcm7xx_pwm_fan_probe+0x204/0x890
LR is at arm_heavy_mb+0x1c/0x38
Fix the problem by detecting the number of supported PWM modules in the
probe function and only instantiating the supported modules.
Fixes: 89fec128d5d1 ("hwmon: (npcm750-pwm-fan) Add NPCM8xx support")
Cc: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a bunch of cleanups and simplifications across the
board, as well as a number of small fixes.
Perhaps the most notable change here is the addition of an API that
allows PWMs to be used in atomic contexts, which is useful when time-
critical operations are involved, such as using a PWM to generate IR
signals.
Finally, I have decided to step down as PWM subsystem maintainer. Due
to other responsibilities I have lately not been able to find the time
that the subsystem deserves and Uwe, who has been helping out a lot
for the past few years and has many things planned for the future, has
kindly volunteered to take over. I have no doubt that he will be a
suitable replacement"
* tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
MAINTAINERS: pwm: Thierry steps down, Uwe takes over
pwm: linux/pwm.h: fix Excess kernel-doc description warning
pwm: Add pwm_apply_state() compatibility stub
pwm: cros-ec: Drop documentation for dropped struct member
pwm: Drop two unused API functions
pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs
pwm: meson: Simplify using dev_err_probe()
pwm: stmpe: Silence duplicate error messages
pwm: Reduce number of pointer dereferences in pwm_device_request()
pwm: crc: Use consistent variable naming for driver data
pwm: omap-dmtimer: Drop locking
dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml
media: pwm-ir-tx: Trigger edges from hrtimer interrupt context
pwm: bcm2835: Allow PWM driver to be used in atomic context
pwm: Make it possible to apply PWM changes in atomic context
pwm: renesas: Remove unused include
pwm: Replace ENOTSUPP with EOPNOTSUPP
pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()
pwm: Stop referencing pwm->chip
pwm: Update kernel doc for struct pwm_chip
...
|
|
Through hidraw, userspace can cause a status report to be sent
from the device. The parsing in waterforce_raw_event() may happen in
parallel to a waterforce_get_status() call (which resets the completion
for tracking the report) if it's running on a different CPU where
bottom half interrupts are not disabled.
Add a spinlock around the complete_all() call in waterforce_raw_event()
to prevent race issues.
Fixes: d5939a793693 ("hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolers")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20231219143620.22179-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Set tmp112 conversion rate to 8 HZ and 12-bit mode.
Fixes: 35cd18048542 ("hwmon: (lm75) Aproximate sample times to data-sheet values")
Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
Link: https://lore.kernel.org/r/20240106030254.384963-1-alkuor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
as6200 is a temperature sensor with 0.0625°C resolution and a
range between -40°C to 125°C.
By default, the driver configures as6200 as following:
- Converstion rate: 8 Hz
- Conversion mode: continuous
- Consecutive fault counts: 4 samples
- Alert state: high polarity
- Alert mode: comparator mode
Interrupt is supported for the alert pin.
Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
Link: https://lore.kernel.org/r/d1686678991bf8ee0d00cb08ca046798f37ca4b3.1703127334.git.alkuor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Including hwmon-sysfs.h is not needed since sysfs code got removed from
this file in commit 08b024338166 ("hwmon: (lm75) Convert to use new hwmon
registration API").
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20231228-hwmon-cleanup-include-v1-1-e36f65aee1f0@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for mp2856/mp2857 device from Monolithic Power Systems, Inc.
(MPS) vendor. This is a dual-loop, digital, multi-phase,
modulation controller.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://lore.kernel.org/r/20231211160519.21254-3-potin.lai.pt@gmail.com
[groeck: Fix checkpatch issues, use i2c_get_match_data()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Remove the #ifdef check for CONFIG_DEBUG_FS and the empty variant
of aqc_debugfs_init(), because the debugfs functions already do nothing
if debugfs isn't enabled.
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20231216140754.336775-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for AMD Family 19h Model 8h CPUs, which appear to
be the Zen 3 based AMD Threadripper 5000WX series (Chagall).
The patch was tested with an AMD Threadripper 5955WX.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218244
Tested-by: Jami Kurki <bindkeys@gmail.com>
Signed-off-by: Jami Kurki <bindkeys@gmail.com>
Co-developed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231211210206.11060-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This driver exposes hardware sensors of the Gigabyte AORUS Waterforce
all-in-one CPU liquid coolers, which communicate through a proprietary
USB HID protocol. Report offsets were initially discovered in [1] and
confirmed by me on a Waterforce X240 by observing the sent reports from
the official software.
Available sensors are pump and fan speed in RPM, as well as coolant
temperature. Also available through debugfs is the firmware version.
Attaching a fan is optional and allows it to be controlled from the
device. If it's not connected, the fan-related sensors will report
zeroes.
The addressable RGB LEDs and LCD screen are not supported in this
driver and should be controlled through userspace tools.
[1]: https://github.com/liquidctl/liquidctl/issues/167
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20231207122402.107032-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
pdev is a bad name for a global variable. Still more as the driver has
functions where pdev is a local variable. Rename it to smsc47m1_pdev.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/68a959b56da7f9452557d08c72249182364b0dd0.1701957841.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use platform_device_register_full() instead of open coding this
function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/ab326fb9b1ad2191583b4cb3a8bd624dfedb908e.1701957841.git.u.kleine-koenig@pengutronix.de
[groeck: Removed double empty line]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/a732270539ef63094a32d0ff582f78e640caf3e4.1701957841.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent the following section mismatch warning
WARNING: modpost: drivers/hwmon/smsc47m1: section mismatch in reference: smsc47m1_driver+0x8 (section: .data) -> smsc47m1_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/57977a88a9b99b6555b227aa4994ac3df10c6490.1701957840.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a driver to support ltc4286 chip
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
Link: https://lore.kernel.org/r/20231123015440.199822-3-Delphine_CC_Chiu@Wiwynn.com
[groeck: Fixed formatting]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In order to introduce a pwm api which can be used from atomic context,
we will need two functions for applying pwm changes:
int pwm_apply_might_sleep(struct pwm *, struct pwm_state *);
int pwm_apply_atomic(struct pwm *, struct pwm_state *);
This commit just deals with renaming pwm_apply_state(), a following
commit will introduce the pwm_apply_atomic() function.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Added custom channel-specific (temp1) attribute for resolution. The wait
time for a conversion in one-shot mode (enable = 0) depends on the
resolution.
When resolution is 12-bit, the conversion time is 140ms, but the minimum
update_interval is 125ms. Handled this problem by waiting an additional
15ms (125ms + 15ms = 140ms).
Added 'mask' parameter to the shutdown_write() function. Now it can
either write or update bits, depending on the value of mask. This is
needed, because for alarms a write is necessary, but for resolution only
the resolution bits should be updated.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20231031182158.124608-5-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When user writes a value to update_interval which does not match the
possible values, instead of returning invalid error, return the closest
value.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20231031182158.124608-4-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Added 'mask' parameter to the shutdown_write() function. Now it can
either write or update bits, depending on the value of mask. This is
needed, because for alarms a write is necessary, but for resolution only
the resolution bits should be updated.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20231031182158.124608-3-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Created of_match_table and id_table entries for max31828 and max31829.
When adi,flt-q and/or adi,alrm-pol are not mentioned,
the default configuration is loaded based on the type of the chip.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20231031182158.124608-2-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Used fwnode to retrieve data from the devicetree in the init_client
function.
If the uint32 properties are not present, the default values are used
for max31827 chip.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20231031182158.124608-1-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Replaces the integer 0 with NULL.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312100455.k6m2eO4N-lkp@intel.com/
Signed-off-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20231210220357.77036-1-mail@mariuszachmann.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
A user reported that on this machine, disabling BIOS fan control
is necessary in order to change the fan speed.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-10-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Some Dell machines like the Dell Optiplex 7000 do not support
the legacy SMM interface, but instead expect all SMM calls
to be issued over a special WMI interface.
Add support for this interface so users can control the fans
on those machines.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-8-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In the future, multiple SMM calling backends will exist,
with each backend being required to initialize its data.
Introduce a helper function for this so the code necessary
to initialize dell_smm_data is not duplicated between
different backends.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-7-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Currently, i8k_dmi_table contains both entries used for DMI
matching and entries used to override config options. This
does not allow for differentiating between "its safe to issue
raw SMM calls on this machine" and "its not safe to issue raw
SMM calls on this machine, but here are some config values".
Since future SMM backends will need to differentiate between
those two cases, move those config entries into a separate
table. i8k_dmi_table now serves as a general "its safe to issue
raw SMM calls" table.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-6-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Future SMM calling backends will not be able to probe during
module init, meaning the DMI tables holding config data would
have to drop their __initconst attribute.
Prevent this by moving the config handling to module init.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-5-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Future SMM calling backends will not be able to probe during
module init, meaning the DMI tables used for whitelisting
features would have to drop their __initconst attribute.
Prevent this by moving the whitelist handling to module init.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Future SMM calling backends will not be able to probe during
module init, meaning the DMI tables used for backlisting broken
features would have to drop their __initconst attribute.
Prevent this by moving the blacklist handling to module init.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Modern Dell machines support multiple ways to issue an SMM call.
Prepare support for those by introducing dell_smm_ops, which is
used by dell_smm_call() to perform a SMM call. Each SMM backend
needs to provide a dell_smm_ops structure.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The EliteDesk 800 G6 stores a raw WMI string within the ACPI object in its
BIOS corresponding to one instance of HPBIOS_PlatformEvents.Name. This is
evidently a valid way of representing a WMI data item as far as the
Microsoft ACPI-WMI mapper is concerned, but is preventing the driver from
loading.
This seems quite rare, but add support for such strings. Treating this as a
quirk pretty much means adding that support anyway.
Also clean up an oversight in update_numeric_sensor_from_wobj() in which
the result of hp_wmi_strdup() was being used without error checking.
Reported-by: Lukasz Stelmach <l.stelmach@samsung.com>
Closes: https://lore.kernel.org/linux-hwmon/7850a0bd-60e7-88f8-1d6c-0bb0e3234fdc@roeck-us.net/
Tested-by: Lukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20231123054918.157098-1-james@equiv.tech
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
MILLI and MICRO may be used in the driver to make code more robust
against possible miscalculations.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231128180654.395692-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231128180654.395692-3-andriy.shevchenko@linux.intel.com
[groeck: Fixed excessive line length]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The driver uses math.h and not util_macros.h.
All the same for the kernel.h, replace it with what the driver is using.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231128180654.395692-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The PECI CPU sensors are available as soon as the CPU is powered,
however the PECI DIMM sensors are available after DRAM has been
trained and thresholds have been written by host firmware.
The default timeout of 30 seconds isn't enough for modern multisocket
platforms utilizing DDR5 memory to bring up the memory and enable PECI
sensor data.
Bump the default timeout to 10 minutes in case the system starts
without cached DDR5 training data.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20231130090422.2535542-1-patrick.rudolph@9elements.com
[groeck: List affected driver in patch subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Without visibility into the initializers for data->innr, GCC suspects
using it as an index could walk off the end of the various 14-element
arrays in data. Perform an explicit clamp to the array size. Silences
the following warning with GCC 12+:
../drivers/hwmon/pc87360.c: In function 'pc87360_update_device':
../drivers/hwmon/pc87360.c:341:49: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
341 | data->in_max[i] = pc87360_read_value(data,
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
342 | LD_IN, i,
| ~~~~~~~~~
343 | PC87365_REG_IN_MAX);
| ~~~~~~~~~~~~~~~~~~~
../drivers/hwmon/pc87360.c:209:12: note: at offset 255 into destination object 'in_max' of size 14
209 | u8 in_max[14]; /* Register value */
| ^~~~~~
Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231130200207.work.679-kees@kernel.org
[groeck: Added comment into code clarifying context]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Setting the fan speed is only valid in manual mode; it is not possible
to set the fan's speed in automatic mode.
Return error when attempting to set the fan speed in automatic mode.
Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com>
Link: https://lore.kernel.org/r/20231121081604.2499-3-xingtong_wu@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The nct6116 has 2 additional PWM pins compared to the nct6106.
Extend the nct6106 PWM arrays to support the nct6116.
Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com>
Link: https://lore.kernel.org/r/20231121081604.2499-2-xingtong_wu@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for mp5990 device from Monolithic Power Systems, Inc. (MPS)
vendor. This is a Hot-Swap Controller.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20231113155008.2147090-3-peteryin.openbmc@gmail.com
[groeck: Improved and clarified comments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use preferred i2c_get_match_data() instead of of_match_device() and
i2c_match_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Adjust the 'chips' enum to not use 0, so that no match data can be
distinguished from a valid enum value.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231115205703.3730448-3-robh@kernel.org
[groeck: Use double cast for enum chips assignment to make compiler happy]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Changing the "kinds" enum start value to be 1-indexed instead of
0-indexed caused look-ups in nct6775_device_names[] to be misaligned or
off the end.
Initialize the string list with explicit indexes.
Cc: Rob Herring <robh@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Fixes: 10a0575ea09d ("hwmon: nct6775-i2c: Use i2c_get_match_data()")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Changing the "kinds" enum start value to be 1-indexed instead of
0-indexed caused look-ups in nct6775_sio_namesp[] to be misaligned or
off the end. Coverity reported:
*** CID 1571052: Memory - illegal accesses (OVERRUN)
drivers/hwmon/nct6775-platform.c:1075 in nct6775_find()
1069 sio_data->kind == nct6793 || sio_data->kind == nct6795 ||
1070 sio_data->kind == nct6796 || sio_data->kind == nct6797 ||
1071 sio_data->kind == nct6798 || sio_data->kind == nct6799)
1072 nct6791_enable_io_mapping(sio_data);
1073
1074 sio_data->sio_exit(sio_data);
vvv CID 1571052: Memory - illegal accesses (OVERRUN)
vvv Overrunning array "nct6775_sio_names" of 13 8-byte elements at element index 13 (byte offset 111) using index "sio_data->kind" (which evaluates to 13).
1075 pr_info("Found %s or compatible chip at %#x:%#x\n",
1076 nct6775_sio_names[sio_data->kind], sioaddr, addr);
1077
1078 return addr;
1079 }
1080
Initialize the string list with explicit indexes.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Fixes: 10a0575ea09d ("hwmon: nct6775-i2c: Use i2c_get_match_data()")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231116140144.work.027-kees@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use preferred i2c_get_match_data() instead of of_match_device() and
i2c_match_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Adjust the 'kinds' enum to not use 0, so that no match data can be
distinguished from a valid enum value.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231115205703.3730448-2-robh@kernel.org
[groeck: Use double cast for i2c_get_match_data() to make clang happy]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use preferred i2c_get_match_data() instead of of_match_device() and
i2c_match_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231115205703.3730448-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
aspeed_create_fan_tach_channel()
Based on the documentation below, the maximum number of Fan tach
channels is 16:
Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt:45:
45 - aspeed,fan-tach-ch : should specify the Fan tach input channel.
46 integer value in the range 0 through 15, with 0 indicating
47 Fan tach channel 0 and 15 indicating Fan tach channel 15.
48 At least one Fan tach input channel is required.
However, the compiler doesn't know that, and legitimaly warns about a potential
overwrite in array `u8 fan_tach_ch_source[16]` in `struct aspeed_pwm_tacho_data`,
in case `index` takes a value outside the boundaries of the array:
drivers/hwmon/aspeed-pwm-tacho.c:
179 struct aspeed_pwm_tacho_data {
...
184 bool fan_tach_present[16];
...
193 u8 fan_tach_ch_source[16];
196 };
In function ‘aspeed_create_fan_tach_channel’,
inlined from ‘aspeed_create_fan’ at drivers/hwmon/aspeed-pwm-tacho.c:877:2,
inlined from ‘aspeed_pwm_tacho_probe’ at drivers/hwmon/aspeed-pwm-tacho.c:936:9:
drivers/hwmon/aspeed-pwm-tacho.c:751:49: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
751 | priv->fan_tach_ch_source[index] = pwm_source;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
drivers/hwmon/aspeed-pwm-tacho.c: In function ‘aspeed_pwm_tacho_probe’:
drivers/hwmon/aspeed-pwm-tacho.c:193:12: note: at offset [48, 255] into destination object ‘fan_tach_ch_source’ of size 16
193 | u8 fan_tach_ch_source[16];
| ^~~~~~~~~~~~~~~~~~
Fix this by sanity checking `index` before using it to index arrays of
size 16 elements in `struct aspeed_pwm_tacho_data`. Also, pass `dev` as
argument to function `aspeed_create_fan_tach_channel()`, and add an error
message in case `index` is out-of-bounds, in which case return `-EINVAL`.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZVPQJIP26dIzRAr6@work
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix some kernel-doc comments to silence the warnings:
drivers/hwmon/sht4x.c:65: warning: Function parameter or member 'valid' not described in 'sht4x_data'
drivers/hwmon/sht4x.c:73: warning: Function parameter or member 'data' not described in 'sht4x_read_values'
drivers/hwmon/sht4x.c:73: warning: Excess function parameter 'sht4x_data' description in 'sht4x_read_values'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7220
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20231110055341.39939-1-yang.lee@linux.alibaba.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for EMC1442 which is compatible with EMC1402.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20231102090808.427351-1-Delphine_CC_Chiu@wiwynn.com
[groeck: compatible with EMC1402, not EMC1403]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Remove device reference from struct ltc2991_state since it is used only
inside the init function.
Pass the struct device as parameter to the init function instead.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231031095647.48376-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Adding Pulse Width Modulation (PWM) and fan tacho NPCM8xx support to
NPCM PWM and fan tacho driver.
NPCM8xx uses a different number of PWM devices.
As part of adding NPCM8XX support:
- Add NPCM8xx specific compatible string.
- Add data to handle architecture-specific PWM parameters.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/20231031075806.400872-2-tmaimon77@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
It seems that when the driver is built-in, the HID bus is
initialized after the driver is loaded, which whould cause
module_hid_driver() to fail.
Fix this by registering the driver after the HID bus using
late_initcall() in accordance with other hwmon HID drivers.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de
[groeck: Dropped "compile tested" comment; the patch has been tested
but the tester did not provide a Tested-by: tag]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
There is no point in calling hid_hw_stop() if hid_hw_start() has failed.
There is no point in calling hid_hw_close() if hid_hw_open() has failed.
Update the error handling path accordingly.
Fixes: 82e3430dfa8c ("hwmon: add driver for NZXT Kraken X42/X52/X62/X72")
Reported-by: Aleksa Savic <savicaleksa83@gmail.com>
Closes: https://lore.kernel.org/all/121470f0-6c1f-418a-844c-7ec2e8a54b8e@gmail.com/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/a768e69851a07a1f4e29f270f4e2559063f07343.1701617030.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The ACPI specification says:
"If an error occurs while obtaining the meter reading or if the value
is not available then an Integer with all bits set is returned"
Since the "integer" is 32 bits in case of the ACPI power meter,
userspace will get a power reading of 2^32 * 1000 miliwatts (~4.29 MW)
in case of such an error. This was discovered due to a lm_sensors
bugreport (https://github.com/lm-sensors/lm-sensors/issues/460).
Fix this by returning -ENODATA instead.
Tested-by: <urbinek@gmail.com>
Fixes: de584afa5e18 ("hwmon driver for ACPI 4.0 power meters")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231124182747.13956-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Include `linux/regulator/consumer.h` since the driver is using
`devm_regulator_get_enable` function.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231031091324.23991-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
There is a spelling mistake in a dev_err_probe messages. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231031084240.2148339-1-colin.i.king@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for LTC2991
- Driver for POWER-Z
Added chip / system support to existing drivers:
- The ina238 driver now also supports INA237
- The asus-ec-sensors driver now supports ROG Crosshair X670E Gene
- The aquacomputer_d5next now supports Aquacomputer High Flow USB and
MPS Flow
- The pmbus/mpq7932 driver now also supports MPQ2286
- The nct6683 now also supports ASRock X670E Taichi
Various other minor improvements and fixes:
- One patch series to call out is the conversion of hwmon platform
drivers to use the platform remove callback returning void"
* tag 'hwmon-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (69 commits)
hwmon: (aquacomputer_d5next) Check if temp sensors of legacy devices are connected
hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow USB and MPS Flow
dt-bindings: hwmon: npcm: Add npcm845 compatible string
hwmon: Add driver for ltc2991
dt-bindings: hwmon: ltc2991: add bindings
hwmon: (pmbus/max31785) Add delay between bus accesses
hwmon: (ina238) add ina237 support
dt-bindings: hwmon: ti,ina2xx: add ti,ina237
hwmon: (asus-ec-sensors) add ROG Crosshair X670E Gene.
hwmon: (max31827) handle vref regulator
hwmon: (ina3221) Add support for channel summation disable
dt-bindings: hwmon: ina3221: Add ti,summation-disable
dt-bindings: hwmon: ina3221: Convert to json-schema
hwmon: (pmbus/mpq7932) Add a support for mpq2286 Power Management IC
hwmon: (pmbus/core) Add helper macro to define single pmbus regulator
regulator: dt-bindings: Add mps,mpq2286 power-management IC
hwmon: (pmbus/mpq7932) Get page count based on chip info
dt-bindings: hwmon: Add possible new properties to max31827 bindings
hwmon: (max31827) Modify conversion wait time
hwmon: (max31827) Make code cleaner
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These fix issues, add new quirks, rearrange the IRQ override quirk
definitions, add new helpers and switch over code to using them,
rework a couple of interfaces to be more flexible, eliminate strncpy()
usage from PNP, extend the ACPI PCC mailbox driver and clean up code.
This is based on ACPI thermal driver changes that are present in the
thermal control updates for 6.7-rc1 pull request (they are depended on
by the ACPI utilities updates). However, the ACPI thermal driver
changes are not included in the list of specific ACPI changes below.
Specifics:
- Add symbol definitions related to CDAT to the ACPICA code (Dave
Jiang)
- Use the acpi_device_is_present() helper in more places and rename
acpi_scan_device_not_present() to be about enumeration (James
Morse)
- Add __printf format attribute to acpi_os_vprintf() (Su Hui)
- Clean up departures from kernel coding style in the low-level
interface for ACPICA (Jonathan Bergh)
- Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt)
- Fail FPDT parsing on zero length records and add proper handling
for fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick)
- Rework acpi_handle_list handling so as to manage it dynamically,
including size computation (Rafael Wysocki)
- Clean up ACPI utilities code so as to make it follow the kernel
coding style (Jonathan Bergh)
- Consolidate IRQ trigger-type override DMI tables and drop .ident
values from dmi_system_id tables used for ACPI resources management
quirks (Hans de Goede)
- Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach)
- Allow _DSD buffer data only for byte accessors and document the
_DSD data buffer GUID (Andy Shevchenko)
- Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
driver, because it does not need them (Raag Jadav)
- Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej
Zary)
- Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets
(Hans de Goede)
- Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de
Goede)
- Annotate struct prm_module_info with __counted_by (Kees Cook)
- Fix AER info corruption in aer_recover_queue() when error status
data has multiple sections (Shiju Jose)
- Make APEI use ERST maximum execution time for slow devices (Jeshua
Smith)
- Add support for platform notification handling to the PCC mailbox
driver and modify it to support shared interrupts for multiple
subspaces (Huisong Li)
- Define common macros to use when referring to various bitfields in
the PCC generic communications channel command and status fields
and use them in some drivers (Sudeep Holla)
- Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
Denose)
- Fix and clean up create_pnp_modalias() and create_of_modalias()
(Christophe JAILLET)
- Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
Shevchenko)
- Define acpi_dev_uid_match() for matching _UID and use it in several
places (Raag Jadav)
- Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav)
- Add context argument to acpi_dev_install_notify_handler() (Rafael
Wysocki)
- Clarify ACPI bus concepts in the ACPI device enumeration
documentation (Rafael Wysocki)
- Switch over the ACPI AC and ACPI PAD drivers to using the platform
driver interface which, is more logically consistent than binding a
driver directly to an ACPI device object, and clean them up (Michal
Wilczynski)
- Replace strncpy() in the PNP code with either memcpy() or strscpy()
as appropriate (Justin Stitt)
- Clean up coding style in pnp.h (GuoHua Cheng)"
* tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
ACPI: resource: Do IRQ override on TongFang GMxXGxx
perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID
ACPI: EC: Add quirk for HP 250 G7 Notebook PC
ACPI: x86: use acpi_dev_uid_match() for matching _UID
ACPI: utils: use acpi_dev_uid_match() for matching _UID
pinctrl: intel: use acpi_dev_uid_match() for matching _UID
ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID
ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias()
ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
ACPI: acpi_pad: Rename ACPI device from device to adev
ACPI: acpi_pad: Use dev groups for sysfs
ACPI: acpi_pad: Replace acpi_driver with platform_driver
ACPI: APEI: Use ERST timeout for slow devices
ACPI: scan: Rename acpi_scan_device_not_present() to be about enumeration
PNP: replace deprecated strncpy() with memcpy()
PNP: ACPI: replace deprecated strncpy() with strscpy()
perf: qcom: use acpi_device_uid() for fetching _UID
ACPI: sysfs: use acpi_device_uid() for fetching _UID
ACPI: scan: Use the acpi_device_is_present() helper in more places
ACPI: AC: Rename ACPI device from device to adev
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have
a model ID less than 4.
The newer models have the topology CPUID leaf 0xB correctly
implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By
chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
the hotplug control stay at its default value "enabled". So the mask
is never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core
to deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or
even non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned
long or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die IDs.
That's really not the right place simply because cpuinfo is subject
to be reinitialized when a CPU goes through an offline/online cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
x86/cpu: Provide debug interface
x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
x86/apic: Use u32 for [gs]et_apic_id()
x86/apic: Use u32 for phys_pkg_id()
x86/apic: Use u32 for cpu_present_to_apicid()
x86/apic: Use u32 for check_apicid_used()
x86/apic: Use u32 for APIC IDs in global data
x86/apic: Use BAD_APICID consistently
x86/cpu: Move cpu_l[l2]c_id into topology info
x86/cpu: Move logical package and die IDs into topology info
x86/cpu: Remove pointless evaluation of x86_coreid_bits
x86/cpu: Move cu_id into topology info
x86/cpu: Move cpu_core_id into topology info
hwmon: (fam15h_power) Use topology_core_id()
scsi: lpfc: Use topology_core_id()
x86/cpu: Move cpu_die_id into topology info
x86/cpu: Move phys_proc_id into topology info
x86/cpu: Encapsulate topology information in cpuinfo_x86
...
|
|
connected
Return -ENODATA if a temp sensor of a legacy device
does not contain a reading.
Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20231016083559.139341-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
MPS Flow
Extend aquacomputer_d5next driver to expose various hardware sensors of the
Aquacomputer High Flow USB flow sensor, which communicates through a
proprietary USB HID protocol. This commit also adds support for the sensors
of the MPS Flow devices, as they have the same USB product ID and sensor
layouts. Implemented by Leonard Anderweit [1].
Internal and external temp sensor readings are available, along with
the flow sensor.
Additionally, serial number and firmware version are exposed through
debugfs.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/90
Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20231016083559.139341-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for LTC2991 Octal I2C Voltage, Current, and Temperature
Monitor.
The LTC2991 is used to monitor system temperatures, voltages and
currents. Through the I2C serial interface, the eight monitors can
individually measure supply voltages and can be paired for
differential measurements of current sense resistors or temperature
sensing transistors. Additional measurements include internal
temperature and internal VCC.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231026103413.27800-2-antoniu.miclaus@analog.com
[groeck: Fixed up documentation warning]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The MAX31785 has shown erratic behaviour across multiple system
designs, unexpectedly clock stretching and NAKing transactions.
Experimentation shows that this seems to be triggered by a register access
directly back to back with a previous register write. Experimentation also
shows that inserting a small delay after register writes makes the issue go
away.
Use a similar solution to what the max15301 driver does to solve the same
problem. Create a custom set of bus read and write functions that make sure
that the delay is added.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20231027044346.2167548-1-lakshmiy@us.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The INA237 "85-V, 16-Bit, Precision Power Monitor With I2C Interface" is
basically the same as INA328. Therefore add a corresponding compatible
to the driver.
According to the datasheet the main difference is the current and power
monitoring accuracy:
+------------------------+---------------+---------------+
| | INA238 | INA237 |
+------------------------+---------------+---------------+
| Offset voltage | +/- 5µV | +/- 50µV |
| Offset drift | +/- 0.02µV/°C | +/- 0.02µV/°C |
| Gain error | +/- 0.1% | +/- 0.3% |
| Gain error drift | +/- 25ppm/°C | +/- 50ppm/°C |
| Common mode rejection | 140dB | 120dB |
| Power accuracy | 0.7% | 1.6% |
+------------------------+---------------+---------------+
As well as the missing DEVICE_ID register at 0x3F, which is currently
not in use by the driver.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://lore.kernel.org/r/20231026-ina237-v2-1-dec44811a3c9@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Only the temp sensors that I can verify are present.
T_Sensor is the temperature reading of a 10kΩ β=3435K NTC thermistor
optionally connected to the T_SENSOR header.
The other sensors are as found on the X670E Hero.
Signed-off-by: Ellie Hermaszewska <kernel@monoid.al>
Link: https://lore.kernel.org/r/20231026104332.906357-1-kernel@monoid.al
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add missing implementation for the max31827 supply regulator.
This is a hardware required property that is not handled.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20230925122929.10610-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The INA3221 allows the Critical alert pin to be controlled by the
summation control function. This function adds the single
shunt-voltage conversions for the desired channels in order to compare
the combined sum to the programmed limit. The Shunt-Voltage Sum Limit
register contains the programmed value that is compared to the value in
the Shunt-Voltage Sum register in order to determine if the total summed
limit is exceeded. If the shunt-voltage sum limit value is exceeded, the
Critical alert pin pulls low.
For the summation limit to have a meaningful value, we have to use the
same shunt-resistor value on all included channels. Unless equal
shunt-resistor values are used for each channel, the summation control
function cannot be used and it is not enabled by the driver.
To address this, add support to disable the summation of specific
channels via device tree property "ti,summation-disable". The channel
which has this property would be excluded from the calculation of
summation control function.
For example, summation control function calculates Shunt-Voltage Sum as:
- input_shunt_voltage_summation = input_shunt_voltage_channel1
+ input_shunt_voltage_channel2
+ input_shunt_voltage_channel3
If we want the summation to only use channel1 and channel3, we can add
'ti,summation-disable' property in device tree node for channel2. Then
the calculation will skip channel2.
- input_shunt_voltage_summation = input_shunt_voltage_channel1
+ input_shunt_voltage_channel3
Note that we only want the channel to be skipped for summation control
function rather than completely disabled. Therefore, even if we add the
property 'ti,summation-disable', the channel is still enabled and
functional.
Finally, create debugfs entries that display if summation is disabled
for each of the channels.
Signed-off-by: Rajkumar Kasirajan <rkasirajan@nvidia.com>
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Co-developed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230929103650.86074-4-jonathanh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The MPQ2286 is a programmable, high frequency synchronous buck regulator
designed to power a variety of Automotive system peripherals. Single buck
converters with hardware monitoring capability is configurable over PMBus
interface.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20231011164754.449399-5-saravanan@linumiz.com
[groeck: Updated subject (mpq2286 -> mpq7932)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The bindings for single instance regulator should be named with no instance
(e.g., buck not buck0). Introduce a new helper macro to define the single pmbus
regulator.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20231011164754.449399-4-saravanan@linumiz.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Get page count using compatible match to support the series of chipsets
which differs in number of regualator/page.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20231011164754.449399-2-saravanan@linumiz.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
There is nothing in the datasheet indicating that the 1ms error is
needed and I didn't encounter any error during testing with 140ms wait
time.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20230919093456.10592-2-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Used enums and while loops to replace switch for selecting and getting
update interval from conversion rate bits.
Divided the write_alarm_val function into 2 functions. The new function
is more generic: it can be used not only for alarm writes, but for any
kind of writes which require the device to be in shutdown mode.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20230919093456.10592-1-daniel.matyas@analog.com
[groeck: Reverted error return value change (EOPNOTSUPP -> EINVAL)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This value was found on an ASRock X670E Taichi with an
NCT6686D chip.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Link: https://lore.kernel.org/r/20231023182442.21943-1-akoskovich@pm.me
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Do not allow setting shunt resistor to 0. This results in a division by
zero when performing current value computations based on input voltages
and connected resistor values.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231011135754.13508-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
npcm7xx_pwm_config_set() can return '-ENODEV' for failed. So check
the value of 'ret' after calling npcm7xx_pwm_config_set().
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231020085518.198477-1-suhui@nfschina.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Currently the local variable hum is being divided by a constant and
the results is being re-assigned back to hum before the value is being
returned to the caller. The assignment to hum is redundant and can
be removed.
Cleans up clang scan build warning:
drivers/hwmon/hs3001.c:65:9: warning: Although the value stored to 'hum'
is used in the enclosing expression, the value is never actually read
from 'hum' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231023135828.667297-1-colin.i.king@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20231024062018.23839-6-raag.jadav@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the ADT7490's Imon voltage readout. It is handled
largely the same way as the existing Vtt readout.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Co-developed-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Link: https://lore.kernel.org/r/20230914223947.829025-1-tpearson@raptorengineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The KM002C is similar to the KM003C and seems to use the same
protocol and firmware.
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Closes: https://lore.kernel.org/lkml/290ebce4-54f0-8ac1-2a13-cbc806d80d64@interlog.com/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230911-powerz-km002c-v1-1-898bd79b9bae@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-25-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-24-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-23-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-22-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-21-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-20-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-18-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-17-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
