| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove the 'code-block:: none' labels and switch to the shorter '::' to
reduce noise.
Remove a unneeded level of indentation, as that reduces the chance that
readers have to scroll sideways in some of the code blocks.
No text changes. Rendered html output looks like before, except for the
different level of indentation.
CC: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/755afbeafc8e1457154cb4b30ff4397f34326679.1714367921.git.linux@leemhuis.info
|
|
Fine-tuning:
* s/Linus' tree/Linux mainline/, as mainline is the term used elsewhere
in the document.
* Provide a better example for the 'delayed backporting' case that uses
a fixed rather than a relative reference point, which makes it easier
to handle for the stable team.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/0a120573ea827aee12d45e7bd802ba85c09884da.1714367921.git.linux@leemhuis.info
|
|
Explain the general concept once in the intro to keep things somewhat
shorter in the individual points.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/106e21789e2bf02d174e1715b49cd4d30886d51f.1714367921.git.linux@leemhuis.info
|
|
Support of kprobes and kretprobes for riscv was introduced 3 years ago
by the following change:
commit c22b0bcb1dd0 ("riscv: Add kprobes supported")
Add riscv to the list of supported architectures.
Signed-off-by: Ivan Orlov <ivan.orlov@codethink.co.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240429155735.68781-1-ivan.orlov@codethink.co.uk
|
|
Fix spelling and grammar in Docs descriptions
Signed-off-by: Remington Brasga <rbrasga@uci.edu>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240429225527.2329-1-rbrasga@uci.edu
|
|
Running "make htmldocs" on a newly installed Sphinx 7.3.7 ends up in
a build error:
Sphinx parallel build error:
AttributeError: module 'docutils.nodes' has no attribute 'reprunicode'
docutils 0.21 has removed nodes.reprunicode, quote from release note [1]:
* Removed objects:
docutils.nodes.reprunicode, docutils.nodes.ensure_str()
Python 2 compatibility hacks
Sphinx 7.3.0 supports docutils 0.21 [2]:
kernel_include.py, whose origin is misc.py of docutils, uses reprunicode.
Upstream docutils removed the offending line from the corresponding file
(docutils/docutils/parsers/rst/directives/misc.py) in January 2022.
Quoting the changelog [3]:
Deprecate `nodes.reprunicode` and `nodes.ensure_str()`.
Drop uses of the deprecated constructs (not required with Python 3).
Do the same for kernel_include.py.
Tested against:
- Sphinx 2.4.5 (docutils 0.17.1)
- Sphinx 3.4.3 (docutils 0.17.1)
- Sphinx 5.3.0 (docutils 0.18.1)
- Sphinx 6.2.1 (docutils 0.19)
- Sphinx 7.2.6 (docutils 0.20.1)
- Sphinx 7.3.7 (docutils 0.21.2)
Link: http://www.docutils.org/RELEASE-NOTES.html#release-0-21-2024-04-09 [1]
Link: https://www.sphinx-doc.org/en/master/changes.html#release-7-3-0-released-apr-16-2024 [2]
Link: https://github.com/docutils/docutils/commit/c8471ce47a24 [3]
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/faf5fa45-2a9d-4573-9d2e-3930bdc1ed65@gmail.com
|
|
Catch up the update made in commit e49ad8530de9 ("CREDITS, MAINTAINERS,
docs/process/howto: Update man-pages' maintainer").
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Tsugikazu Shibata <shibata@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240502085610.111739-1-akiyks@gmail.com
|
|
Translation for the following patches
commit 6e55b1cbf05d ("docs: try to encourage (netdev?) reviewers")
commit e49ad8530de9 ("CREDITS, MAINTAINERS, docs/process/howto: Update man-pages' maintainer")
commit 44ac5abac86b ("Documentation/security-bugs: move from admin-guide/ to process/")
commit 5a602de99797 ("Add .editorconfig file for basic formatting")
commit 129027b78c49 ("docs: deprecated.rst: Update an example")
commit efc0a7cfe9ec ("Docs/process/changes: Consolidate NFS-utils update links")
commit 383f30882197 ("Docs/process/changes: Replace http:// with https://")
commit 80fe9e51510b ("rust: upgrade to Rust 1.74.1")
commit c584476d477e ("doc: Add tar requirement to changes.rst")
commit b230235b3865 ("docs: Set minimal gtags / GNU GLOBAL version to 6.6.5")
commit 3e893e16af55 ("docs: Raise the minimum Sphinx requirement to 2.4.4")
commit 08ab786556ff ("rust: bindgen: upgrade to 0.65.1")
commit 185ea7676ef3 ("Documentation: coding-style: Update syntax highlighting for code-blocks")
commit 932be49b71e7 ("Documentation: coding-style: Fix indentation in code-blocks")
commit 5c7944ca7b13 ("coding-style: Add guidance to prefer dev_dbg")
commit c15ec3d1a287 ("Documentation: doc-guide: use '%' constant indicator in Return: examples")
commit 329ac9af902e ("docs: submitting-patches: Discuss interleaved replies")
commit 5382774515d4 ("(docs-next) A reworked process/index.rst")
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240316225400.22590-1-federico.vaga@vaga.pv.it
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
Keystone2 device tree updates for v6.10
Generic Cleanups/Fixes:
- Remove custom ti,system-reboot-controller property
* tag 'ti-keystone-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
dt-bindings: arm: keystone: Remove ti,system-reboot-controller property
ARM: dts: ti: keystone: k2g: Remove ti,system-reboot-controller property
Link: https://lore.kernel.org/r/20240501124309.3cj5b3gjf3cpimut@outsell
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The 'choice' statement is primarily used to exclusively select one
option, but the 'optional' property allows all entries to be disabled.
In the following example, both A and B can be disabled simultaneously:
choice
prompt "choose A, B, or nothing"
optional
config A
bool "A"
config B
bool "B"
endchoice
You can achieve the equivalent outcome by other means.
A common solution is to add another option to guard the choice block.
In the following example, you can set ENABLE_A_B_CHOICE=n to disable
the entire choice block:
choice
prompt "choose A or B"
depends on ENABLE_A_B_CHOICE
config A
bool "A"
config B
bool "B"
endchoice
Another approach is to insert one more entry:
choice
prompt "choose A, B, or disable both"
config A
bool "A"
config B
bool "B"
config DISABLE_A_AND_B
bool "choose this to disable both A and B"
endchoice
Some real examples are DEBUG_INFO_NONE, INITRAMFS_COMPRESSION_NONE,
LTO_NONE, etc.
The 'optional' property is even more unnecessary for a tristate choice.
Without the 'optional' property, you can disable A and B; you can set
'm' in the choice prompt, and disable A and B individually:
choice
prompt "choose one built-in or make them modular"
config A
tristate "A"
config B
tristate "B"
endchoice
In conclusion, the 'optional' property was unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
Running dtbs_check and dt_compatible_check targets really only depend
on processed-schema.json, but the dependency is 'dt_binding_check'. That
was sort worked around with the CHECK_DT_BINDING variable in order to
skip some of the work that 'dt_binding_check' does. It still runs the
full checks of the schemas which is not necessary and adds 10s of
seconds to the build time. That's significant when checking only a few
DTBs and with recent changes that have improved the validation time by
6-7x.
Add a new target, dt_binding_schema, which just builds
processed-schema.json and can be used as the dependency for other
targets. The scripts_dtc dependency isn't needed either as the examples
aren't built for it.
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The 'local-bd-address' property is used to pass a unique Bluetooth
device address from the boot firmware to the kernel and should otherwise
be left unset.
Update the example to reduce the risk that a non-zero address will be
used by default in some devicetree.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240501075005.4588-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
If a vcpu exits for a data abort with an invalid syndrome, the
expectations are that userspace has a chance to save the day if
it has requested to see such exits.
However, this is completely futile in the case of a protected VM,
as none of the state is available. In this particular case, inject
a data abort directly into the vcpu, consistent with what userspace
could do.
This also helps with pKVM, which discards all syndrome information when
forwarding data aborts that are not known to be MMIO.
Finally, document this tweak to the API.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-31-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM/arm64 makes use of the SMCCC "Vendor Specific Hypervisor Service
Call Range" to expose KVM-specific hypercalls to guests in a
discoverable and extensible fashion.
Document the existence of this interface and the discovery hypercall.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-28-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In preparation for describing the guest view of KVM/arm64 hypercalls in
hypercalls.rst, move the existing contents of the file concerning the
firmware pseudo-registers elsewhere.
Cc: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-27-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The PTP hypercall documentation doesn't produce the best-looking table
when formatting in HTML as all of the return value definitions end up
on the same line.
Reformat the PTP hypercall documentation to follow the formatting used
by hypercalls.rst.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-26-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240430085654.1028864-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Similar to printk() '%pd' is for fetch dentry's name from struct dentry's
pointer, and '%pD' is for fetch file's name from struct file's pointer.
Link: https://lore.kernel.org/all/20240322064308.284457-4-yebin10@huawei.com/
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
'rcu-sync-normal-improve.2024.04.15a', 'rcu-tasks.2024.04.15a' and 'rcutorture.2024.04.15a' into rcu-merge.2024.04.15a
fixes.2024.04.15a: RCU fixes
misc.2024.04.12a: Miscellaneous fixes
rcu-sync-normal-improve.2024.04.15a: Improving synchronize_rcu() call
rcu-tasks.2024.04.15a: Tasks RCU updates
rcutorture.2024.04.15a: Torture-test updates
|
|
pwm-cells property is already required by pwm.yaml schema.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/68eaecf11db9bec7bdb90dbf38507332628a0434.1714450308.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
pwm-cells property is already required by pwm.yaml schema.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/480bcdc37958a9d99f4b61c26a13b844a1e416df.1714450308.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
pwm-cells property is already required by pwm.yaml schema.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/0a0c13d6d716a52540e165e4835c0c406cc5d8ec.1714450308.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
pwm-cells property is already required by pwm.yaml schema.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/06765e0dd9a842dc51ff9c9cea93f26b8792e44b.1714450308.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
pwm-cells property is already required by pwm.yaml schema.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/231df058d9cb35cfcf4bcdf4385f4ad8cb21a046.1714450308.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
pwm-cells property is already required by pwm.yaml schema.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/85d7dc606d60a7d0d1557b98ac3a600c660b7421.1714450308.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Introduces validation for the x->dir attribute within the XFRM input
data lookup path. If the configured direction does not match the
expected direction, input, increment the XfrmInStateDirError counter
and drop the packet to ensure data integrity and correct flow handling.
grep -vw 0 /proc/net/xfrm_stat
XfrmInStateDirError 1
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Introduces validation for the x->dir attribute within the XFRM output
data lookup path. If the configured direction does not match the expected
direction, output, increment the XfrmOutStateDirError counter and drop
the packet to ensure data integrity and correct flow handling.
grep -vw 0 /proc/net/xfrm_stat
XfrmOutPolError 1
XfrmOutStateDirError 1
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Strict priority for the tx scheduler is by default in Linux driver, so the
tx-sched-sp property was removed in commit aed6864035b1 ("net: stmmac:
platform: Delete a redundant condition branch").
This property is still in use in the following DT (and it will be removed
in a separate patch series):
- arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
- arch/arm64/boot/dts/freescale/imx8mp-evk.dts
- arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
- arch/arm64/boot/dts/qcom/sa8540p-ride.dts
- arch/arm64/boot/dts/qcom/sa8775p-ride.dts
There is no problem if that property is still used in the DTs above,
since, as seen above, it is a default property of the driver.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240429092654.31390-2-f.suligoi@asem.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
models
Add support for NZXT Kraken 2023 (standard) and NZXT Kraken 2023 Elite
all-in-one CPU coolers. These models communicate identically to the NZXT
Kraken Z-series (Z53 code paths) in all cases except when writing the
fan curve, where setting additional bits in the report is needed.
Reviewed-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240428104812.14037-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for Infineon XDP710.This is a Hot-Swap Controller.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240425153608.4003782-2-peteryin.openbmc@gmail.com
[groeck: s/microOhmRsense/micro_ohm_osense/g; declared array static]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a device tree bindings for xdp710 device
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240425153608.4003782-3-peteryin.openbmc@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for reading and writing the flow sensor pulses on
the Aquacomputer Octo. Implemented by David Flemstrom [1].
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/95
Originally-from: David Flemstrom <david.flemstrom@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240417175037.32499-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for reading the flow sensor value on
the Aquacomputer Octo. Implemented by David Flemstrom [1].
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/95
Originally-from: David Flemstrom <david.flemstrom@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240417175037.32499-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a compatible string for MediaTek Genio 350 MT8365's display PWM
block: this is the same as MT8183.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231023-display-support-v3-11-53388f3ed34b@baylibre.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix a double-free in the pinctrl_enable() errorpath
- Fix a refcount leak in pinctrl_dt_to_map()
- Fix selecting the GPIO pin control state and the UART3 pin config
group in the Intel Baytrail driver
- Fix readback of schmitt trigger status in the Mediatek Paris driver,
along with some semantic pin config issues in this driver
- Fix a pin suffix typo in the Meson A1 driver
- Fix an erroneous register offset in he Aspeed G6 driver
- Fix an inconsistent lock state and the interrupt type on resume in
the Renesas RZG2L driver
- Fix some minor confusion in the Renesas DT bindings
* tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: renesas: rzg2l: Configure the interrupt type on resume
pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()
pinctrl: baytrail: Add pinconf group for uart3
pinctrl: baytrail: Fix selecting gpio pinctrl state
pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE
pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback
pinctrl: core: delete incorrect free in pinctrl_enable()
pinctrl/meson: fix typo in PDM's pin name
pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T
pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration
dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties
|
|
Merge series from Luca Ceresoli <luca.ceresoli@bootlin.com>:
This series applies various improvements to the DAPM documentation: a
rewrite of a few sections for clarity, style improvements and typo fixes.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
Changes in v2:
- avoid wrapping in patch 3 as suggested by Alex
- Link to v1: https://lore.kernel.org/r/20240416-dapm-docs-v1-0-a818d2819bf6@bootlin.com
---
Luca Ceresoli (12):
ASoC: doc: dapm: fix typos
ASoC: doc: dapm: fix struct name
ASoC: doc: dapm: minor rewording
ASoC: doc: dapm: remove dash after colon
ASoC: doc: dapm: clarify it's an internal API
ASoC: doc: dapm: replace "map" with "graph"
ASoC: doc: dapm: extend initial descrption
ASoC: doc: dapm: describe how widgets and routes are registered
ASoC: doc: dapm: fix and improve section "Registering DAPM controls"
ASoC: doc: dapm: improve section "Codec/DSP Widget Interconnections"
ASoC: doc: dapm: update section "DAPM Widget Events"
ASoC: doc: dapm: update event types
Documentation/sound/soc/dapm-graph.svg | 375 +++++++++++++++++++++++++++++++++
Documentation/sound/soc/dapm.rst | 174 ++++++++++-----
2 files changed, 492 insertions(+), 57 deletions(-)
---
base-commit: c942a0cd3603e34dd2d7237e064d9318cb7f9654
change-id: 20240315-dapm-docs-79bd51f267db
Best regards,
--
Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
The FLT pin was incorrected documented as an output. The MAX8903 uses it to
signal to the processor that a charging fault has occurred.
Signed-off-by: Herman van Hazendonk <github.com@herrie.org>
Link: https://lore.kernel.org/r/20240415151645.1986014-1-github.com@herrie.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Introduce Airoha EN7581 SPI NAND controller binding
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Rajeev Kumar <Rajeev.Kumar@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/f3377b323f00589e6b7ed7950c4840d18129238b.1714377864.git.lorenzo@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.10 from Viresh Kumar:
"- Sun50i: Add support for opp_supported_hw, H616 platform and general
cleaups (Andre Przywara, Martin Botka, Brandon Cheo Fusi, Dan
Carpenter, and Viresh Kumar).
- cppc: Fix possible null pointer dereference (Aleksandr Mishin).
- Eliminate uses of of_node_put() (Javier Carrasco, and Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)."
* tag 'cpufreq-arm-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM4450 compatibles
cpufreq: sun50i: fix error returns in dt_has_supported_hw()
cpufreq: brcmstb-avs-cpufreq: ISO C90 forbids mixed declarations
cpufreq: dt-platdev: eliminate uses of of_node_put()
cpufreq: dt: eliminate uses of of_node_put()
cpufreq: ti: Implement scope-based cleanup in ti_cpufreq_match_node()
cpufreq: mediatek: Add support for MT7988A
cpufreq: sun50i: Fix build warning around snprint()
arm64: dts: allwinner: h616: enable DVFS for all boards
arm64: dts: allwinner: h616: Add CPU OPPs table
cpufreq: sun50i: Add H616 support
cpufreq: sun50i: Add support for opp_supported_hw
cpufreq: sun50i: Refactor speed bin decoding
dt-bindings: opp: Describe H616 OPPs and opp-supported-hw
cpufreq: dt-platdev: Blocklist Allwinner H616/618 SoCs
firmware: smccc: Export revision soc_id function
cppc_cpufreq: Fix possible null pointer dereference
cpupfreq: tegra124: eliminate uses of of_node_put()
|
|
These stats are commonly. Support reporting those via netdev-genl queue
stats.
name: rx-hw-drops
name: rx-hw-drop-overruns
name: rx-csum-unnecessary
name: rx-csum-none
name: rx-csum-bad
name: rx-hw-gro-packets
name: rx-hw-gro-bytes
name: rx-hw-gro-wire-packets
name: rx-hw-gro-wire-bytes
name: rx-hw-drop-ratelimits
name: tx-hw-drops
name: tx-hw-drop-errors
name: tx-csum-none
name: tx-needs-csum
name: tx-hw-gso-packets
name: tx-hw-gso-bytes
name: tx-hw-gso-wire-packets
name: tx-hw-gso-wire-bytes
name: tx-hw-drop-ratelimits
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.10, please pull the following:
- Laurent converts the Raspberry Pi firmware DT binding to YAML, updates
the firmware driver to use the proper 'struct device' reference for
DMA mappings and drops unneeded properties from the DT node and
finishes by removing the duplicate firmware-clocks property to
bcm2835-rpi.dtsi. He also added support for the CAM1 camera interface
regulator.
- Uwe adds a pinctrl-based multiplexing description to allow the use of
I2C0 pins to allow usage between the 40-pin Raspberry Pi header and
the CSI and DSI connectors. He then describes the PCF85063 RTC device
available on the CM4 I/O board making use of that pinctrl-based
muxing.
- Arinc updates the Asus RT-AC3100 and RT-AC88U DTs to have proper LED
colors and function properties, NVMEM MAC addresses and removes
duplicates and unnecessary properties and does a few Device Tree
cleanups.. He then adds support for the Asus RT-AC3200 (BCM4709-based)
and RT-AC3500 routers.
- Jean-Michel adds DT nodes for the CSI Unicam camera interfaces on the
Raspberry Pi 4 / BCM2711 SoCs
- Florian adds support for the Ethernet LEDs on Raspberry Pi 4 B and
Raspberry Pi 4 CM boards.
* tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux:
arm: dts: bcm2711: Describe Ethernet LEDs
ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300
ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200
dt-bindings: arm: bcm: add bindings for ASUS RT-AC5300
dt-bindings: arm: bcm: add bindings for ASUS RT-AC3200
ARM: dts: bcm2835: Add Unicam CSI nodes
ARM: dts: BCM5301X: remove earlycon on ASUS RT-AC3100 and ASUS RT-AC88U
ARM: dts: BCM5301X: remove duplicate compatible on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: provide address for SoC MACs on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: use color and function on ASUS RT-AC3100 and RT-AC88U
ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator
ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0
ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0
ARM: dts: bcm2835-rpi: Move duplicate firmware-clocks to bcm2835-rpi.dtsi
ARM: dts: bcm283x: Drop unneeded properties in the bcm2835-firmware node
firmware: raspberrypi: Use correct device for DMA mappings
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add gpio child node
Link: https://lore.kernel.org/r/20240429213703.2327834-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert NVIDIA Tegra30 I2S binding to DT schema and
add "clock-names" property used by multiple tegra i2s blocks
in arch/arm64/boot/dts/nvidia/tegra132.dtsi. This is not a
required property by the binding.
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240426170322.36273-1-sheharyaar48@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two doc update patches and the following three fixes:
- On single node systems, the default pool is used but the
node_nr_active for the default pool was set to min_active. This
effectively limited the max concurrency of unbound pools on single
node systems to 8 causing performance regressions on some
workloads. Fixed by setting the default pool's node_nr_active to
max_active.
- wq_update_node_max_active() could trigger divide-by-zero if the
intersection between the allowed CPUs for an unbound workqueue and
online CPUs becomes empty.
- When kick_pool() was trying to repatriate a worker to a CPU in its
pod by setting task->wake_cpu, it didn't consider whether the CPU
being selected is online or not which obviously can lead to
subobtimal behaviors. On s390, this triggered a crash in arch code.
The workqueue patch removes the gross misbehavior but doesn't fix
the crash completely as there's a race window in which CPUs can go
down after wake_cpu is set. Need to decide whether the fix should
be on the core or arch side"
* tag 'wq-for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix divide error in wq_update_node_max_active()
workqueue: The default node_nr_active should have its max set to max_active
workqueue: Fix selection of wake_cpu in kick_pool()
docs/zh_CN: core-api: Update translation of workqueue.rst to 6.9-rc1
Documentation/core-api: Update events_freezable_power references.
|
|
Add a command line opt-in option for posted MSI if CONFIG_X86_POSTED_MSI=y.
Also introduce a helper function for testing if posted MSI is supported on
the platform.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423174114.526704-12-jacob.jun.pan@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.10
1. Basic support for SCMI v3.2 pincontrol protocol
SCMI v3.2 introduces pincontrol protocol which is intended for
controlling pins and their configuration. The pin control protocol
provides commands to:
- List the pins, groups of pins, available functions, and their
association with each other.
- Set the parameter configuration and multiplexing of the pins or
groups of pins
- Optionally request exclusive access to a pin or group of pins.
- Optionally configure the permissions of an agent to access a pin
or group of pins.
These changes adds basic support for the same in the SCMI core layer
and an implementation of the generic scmi-pinctrl driver with associated
DT bindings.
2. Framework support for multiple vendors custom protocols
With the fixed space for vendor protocols, the possibility of having
multiple vendors implementing distinct SCMI vendor protocols with
the same overlapping protocol number is very high and with the need
to support them all in a single kernel image or a module is also high.
In order to implement the same we assume:
- vendor protocols has to be tagged at build time with a vendor_id
- vendor protocols could also optionally be tagged at build time with
sub_vendor_id and implementation version
At the initialisation all the built vendor protocols are registered
with the SCMI core using a key derived from the above tags
3. Logging and tracing improvements
This includes using dev_err_probe() to bail out from probe, adding
message dump traces for bad and unexpected replies and widening of
the tag buffer in trace_scmi_dump_msg to allow diverse tag names
4. Miscellaneous updates or improvements
This includes adding the accessor function get_max_msg_size() used
in pinctl protocol, updation of dt-bindings examples for protocol@13
to promote new bindings and simplification of scmi_devm_notifier_unregister
* tag 'scmi-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
pinctrl: Implementation of the generic scmi-pinctrl driver
firmware: arm_scmi: Add basic support for SCMI v3.2 pincontrol protocol
dt-bindings: firmware: Support SCMI pinctrl protocol
firmware: arm_scmi: Introduce get_max_msg_size() helper/accessor
firmware: arm_scmi: Add support for multiple vendors custom protocols
dt-bindings: firmware: arm,scmi: Update examples for protocol@13
firmware: arm_scmi: Avoid non-constant printk format strings
firmware: arm_scmi: Use dev_err_probe to bail out
firmware: arm_scmi: Simplify scmi_devm_notifier_unregister
firmware: arm_scmi: Add message dump traces for bad and unexpected replies
firmware: arm_scmi: Add helper to trace bad messages
include: trace: Widen the tag buffer in trace_scmi_dump_msg
firmware: arm_scmi: Log the perf domain names in the error paths
Link: https://lore.kernel.org/r/20240426105031.1526987-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
TEE driver for Trusted Services
This introduces a TEE driver for Trusted Services [1].
Trusted Services is a TrustedFirmware.org project that provides a
framework for developing and deploying device Root of Trust services in
FF-A [2] Secure Partitions. The project hosts the reference
implementation of Arm Platform Security Architecture [3] for Arm
A-profile devices.
The FF-A Secure Partitions are accessible through the FF-A driver in
Linux. However, the FF-A driver doesn't have a user space interface so
user space clients currently cannot access Trusted Services. The goal of
this TEE driver is to bridge this gap and make Trusted Services
functionality accessible from user space.
[1] https://www.trustedfirmware.org/projects/trusted-services/
[2] https://developer.arm.com/documentation/den0077/
[3] https://www.arm.com/architecture/security-features/platform-security
* tag 'tee-ts-for-v6.10' of https://git.linaro.org/people/jens.wiklander/linux-tee:
MAINTAINERS: tee: tstee: Add entry
Documentation: tee: Add TS-TEE driver
tee: tstee: Add Trusted Services TEE driver
tee: optee: Move pool_op helper functions
tee: Refactor TEE subsystem header files
Link: https://lore.kernel.org/r/20240425073119.GA3261080@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.10
Few cleanups:
1. Correct module auto-loading - missing aliases in the module.
2. Document bindings for the Samsung S5Pv210 SoC DMC memory controller.
* tag 'memory-controller-drv-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: mtk-smi: fix module autoloading
memory: brcmstb_memc: fix module autoloading
dt-bindings: memory-controllers: add Samsung S5Pv210 SoC DMC
Link: https://lore.kernel.org/r/20240428162001.28011-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/drivers
STM32 Firewall bus for v6.10, round 1
Highlights:
---------
Introduce STM32 Firewall framework for STM32MP1x and STM32MP2x
platforms. STM32MP1x(ETZPC) and STM32MP2x(RIFSC) Firewall controllers
register to the framework to offer firewall services such as access
granting.
This series of patches is a new approach on the previous STM32 system
bus, history is available here:
https://lore.kernel.org/lkml/20230127164040.1047583/
The need for such framework arises from the fact that there are now
multiple hardware firewalls implemented across multiple products.
Drivers are shared between different products, using the same code.
When it comes to firewalls, the purpose mostly stays the same: Protect
hardware resources. But the implementation differs, and there are
multiple types of firewalls: peripheral, memory, ...
Some hardware firewall controllers such as the RIFSC implemented on
STM32MP2x platforms may require to take ownership of a resource before
being able to use it, hence the requirement for firewall services to
take/release the ownership of such resources.
On the other hand, hardware firewall configurations are becoming
more and more complex. These mecanisms prevent platform crashes
or other firewall-related incoveniences by denying access to some
resources.
The stm32 firewall framework offers an API that is defined in
firewall controllers drivers to best fit the specificity of each
firewall.
For every peripherals protected by either the ETZPC or the RIFSC, the
firewall framework checks the firewall controlelr registers to see if
the peripheral's access is granted to the Linux kernel. If not, the
peripheral is configured as secure, the node is marked populated,
so that the driver is not probed for that device.
The firewall framework relies on the access-controller device tree
binding. It is used by peripherals to reference a domain access
controller. In this case a firewall controller. The bus uses the ID
referenced by the access-controller property to know where to look
in the firewall to get the security configuration for the peripheral.
This allows a device tree description rather than a hardcoded peripheral
table in the bus driver.
The STM32 ETZPC device is responsible for filtering accesses based on
security level, or co-processor isolation for any resource connected
to it.
The RIFSC is responsible for filtering accesses based on Compartment
ID / security level / privilege level for any resource connected to
it.
* tag 'stm32-bus-firewall-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
firewall: introduce stm32_firewall framework
dt-bindings: bus: document ETZPC
dt-bindings: bus: document RIFSC
dt-bindings: treewide: add access-controllers description
dt-bindings: document generic access controllers
Link: https://lore.kernel.org/r/7dc64226-5429-4ab7-a8c8-6053b12e3cf5@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Thomas needs the defio fixes, Maíra needs the vkms fixes and Joonas
has some fun with i915-gem conflicts.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Update dt schema to include the gs101 hsi2 sysreg compatible.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240429111537.2369227-2-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
|
|
Add dt schema documentation and clock IDs for the High Speed Interface
2 (HSI2) clock management unit. This CMU feeds high speed interfaces
such as PCIe and UFS.
[AD: * keep CMUs in google,gs101.h sorted alphabetically
* resolve minor merge conflicts in google,gs101-clock.yaml
* s/ufs_embd/ufs s/mmc_card/mmc
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20240429-hsi0-gs101-v3-1-f233be0a2455@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX DT bindings for 6.10:
- Add vendor prefix for Emcraft Systems
- Add compatible for new boards: Emcraft Systems i.MX8M Plus NavQ+ Kit,
Colibri iMX8DX, Seeed studio NPi base board, NXP S32G3 board
- Drop reduntant toradex,colibri-imx8x from fsl.yaml
- Add usbmisc compatible for i.MX8ULP
* tag 'imx-bindings-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible
dt-bindings: arm: fsl: Add Colibri iMX8DX
dt-bindings: arm: fsl: remove reduntant toradex,colibri-imx8x
dt-bindings: arm: Add Emcraft Systems i.MX8M Plus NavQ+ Kit
dt-bindings: vendor-prefixes: Add Emcraft Systems
dt-bindings: arm: fsl: add NXP S32G3 board
dt-bindings: arm: fsl: Add Seeed studio NPi based boards
Link: https://lore.kernel.org/r/20240428121247.10370-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Some new SOF changes depend on the fixes there.
|
|
Define "regulator-[0-9]v[0-9]" as the preferred node name for fixed
regulators. Other suffixes with names are also accepted. Combined,
these make up about half of the existing names in use.
For now this only serves as documentation as the schema still allows
anything to avoid lots of additional warnings for something low priority
to fix. Once a "no deprecated" mode is added to the tools, warnings can
be enabled selectively.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240426215147.3138211-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some new event types now exist, so update the code fragment.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-12-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The example in this section is not in the kernel sources anymore. Replace
it with an up to date code fragment. Reword the initial paragraph. Remove
"Please" which is not standard practice in documentation.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-11-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Improve wording in a few places, cleanup ReST colon syntax, remove space
before colon, and remove the "codec" parameter in the parentheses of
snd_soc_dapm_new_widgets() (there should be no parameters in the docs, and
that function takes a card, not a codec).
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-10-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Extend the first paragraph to mention the {,num_}dapm_routes fields just
like the widget conterparts. Mention the route fields also in the code
example. Fix "at build time", this really means "at probe time".
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-9-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The small paragraph describing how to register widgets is incomplete (does
not mention routes) and mentions snd_soc_dapm_new_control() which is not
really used. Moreover it appears as a part of the "Virtual Widgets"
subsection.
Replace it with a detailed and current description of how widgets and
routes are registered, mentioning both static declaration and runtime
registration. Also make this a section on its own.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-8-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Extend the initial description providing clearer definitions of "widget"
and "route", and to stop using the word "component" to mean "widget". Give
more details and clarify wording and add a picture representing a real DAPM
graph.
Group all the introductory paragraphs before the "DAPM power domains", and
split the latter to a specific section.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-7-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DAPM is actually based on a graph, so use this specific term instead of the
more generic "map".
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-6-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need for a dash after colons. Also fix an incorrect ":-::"
sequence.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-4-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Slightly reword for better readability: replace "PM" -> "power management
frameworks", add missing comma.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-3-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
struct snd_soc_codec_dai does not exist.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-2-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix various typos.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-1-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.10
Support for Sony Xperia 1V, on the SM8550 platform, is added.
On IPQ8074, UART6 is described and unused gpios from QPIC are removed.
Backlight and touchscreen are described on Samsung Grand Prime devices.
RGB LED is added to Sony Xperia "Yoshino" devices, on which the
volume-up key definition is corrected as well.
Light Pulse Generator node is added to PM6150L PMIC, and blocks related
to USB Type-C on PM6150 are added.
On QCS6490 Rb3Gen2 UFS storage, USB Type-C management, a couple of
remoteprocs and both USB Type-C and native DisplayPort are enabled.
For the related IDP display is enabled, and the PMIC volume and power
buttons are described.
The inline crypto engine is added for SC7280, and an additional turbo
frequency is added to the MDP.
USB Type-C port management is introduce for the QRB2210 RB1. WiFi
firmware-name qualifier is added to both RB1 and RB2 boards.
The LMH node is added for the QCM2290, to configure the thresholds as
well as provide thermal pressure input.
The regulator range is adjusted for SD-card IO on SA8155P ADP, to allow
UHS modes.
The unused DCC is disabled on SC7180, and unused PMIC gpio block is
disabled on Trogdor.
For Lenovo Flex 5G, on SC8180X, the GPU firmware path is aligned with
agreed upon firmware structure. The frequency of the I2C bus for
touchpad is brought up to mitigate missing events. A number of
additional cleanups are introduced.
For SC8280XP GICv3 ITS is wired up for PCIe. EAS properties ad
introduced. A PS_HOLD-based restart node is introduced and acts as a
fallback if other mechanisms are unavailable to restart the board.
QFPROM is described, missing LMH interrupts for thermal pressure are
added. The TCSR download mode register is added, to allow configuring
if download mode should be entered on a crash.
USB Type-C handling is introduce for Fairphone FP3 as well.
On SM6350 crypto engine and DisplayPort controllers are introduced.
WiFi is enabled on the SM8150 Hardware Development Kit (HDK)
USB PD properties are added on Xiaomi Mi Pad 5 Pro devices.
Interconnect paths are added for UFS on SM8350, to ensure the bus is
voted for when the controller is operating.
On SM8550 the DMA coherency properties are corrected for SMMU and a few
consumers. Missing DWC3 quirks are added and the SNPS PHY parameters are
adjusted. Fastrpc banks are marked non-secure as needed.
The GPU description is introduced on SM8650, and enabled on the QRD. A
missing reserved-memory node is added, as is a few missing fastrpc
compute banks, and the non-secure-domain flag for other banks.
On X1 Elite SPMI support is added, together with PMIC definitons. The
link properties for DP3 are corrected, and audio-related resets are
introduced. SoundWire properties are corrected.
Nodes describing the PCIe bridge under the host controller is added
for a bunch of platforms.
The GPIO carrying orientation information for USB Type-C is added across
Fairphone 5, Lenovo Flex 5G, Lenovo Thinkpad X13s, SM8350 and SM845
HDKs.
A few dtbTool-specific compatibles for msm8916 is dropped from the
bindings.
A number of DeviceTree binding validation issues are corrected.
* tag 'qcom-arm64-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (110 commits)
dt-bindings: arm: qcom: Add Samsung Galaxy S5 China (kltechn)
arm64: dts: qcom: qrb4210-rb1: add firmware-name qualifier to WiFi node
arm64: dts: qcom: qrb2210-rb1: add firmware-name qualifier to WiFi node
arm64: dts: qcom: ipq6018: Add PCIe bridge node
arm64: dts: qcom: ipq8074: Add PCIe bridge node
arm64: dts: qcom: msm8996: Add PCIe bridge node
arm64: dts: qcom: sc8180x: Add PCIe bridge node
arm64: dts: qcom: qcs404: Add PCIe bridge node
arm64: dts: qcom: sc7280: Add PCIe bridge node
arm64: dts: qcom: msm8998: Add PCIe bridge node
arm64: dts: qcom: sc8280xp: Add PCIe bridge node
arm64: dts: qcom: sa8775p: Add PCIe bridge node
arm64: dts: qcom: sm8650: Add PCIe bridge node
arm64: dts: qcom: sm8550: Add PCIe bridge node
arm64: dts: qcom: sm8450: Add PCIe bridge node
arm64: dts: qcom: sm8350: Add PCIe bridge node
arm64: dts: qcom: sm8150: Add PCIe bridge node
arm64: dts: qcom: sdm845: Add PCIe bridge node
arm64: dts: qcom: sm8250: Add PCIe bridge node
arm64: dts: qcom: sdm845-db845c: make pcie0_3p3v_dual always-on
...
Link: https://lore.kernel.org/r/20240427175951.1439887-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.10
The QCA8074 PHY package found in IPQ4019 is properly described.
The Sony Xperia Z2 Tablet is cleaned up and improved, vibrator support
is added, upon support for Sony Xperia Z3 is added.
Also based on MSM8974, support for Samsung Galaxy S5 China is introduced.
The WiFi board type is added for these "klte" Samsung devices, to select
appropriate NVRAM firmware file.
Based on MSM8226, support for Motorola Moto G (2013) is added.
Nodes representing the PCIe bridges under existing controllers are added
for APQ8064, IPQ4019, IPQ8064, and SDX55.
A number of fixes throughout to improve compliance with DeviceTree
bindings.
* tag 'qcom-arm32-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits)
ARM: dts: qcom: msm8974: Add DTS for Samsung Galaxy S5 China (kltechn)
ARM: dts: qcom: msm8974-klte-common: Pin WiFi board type
ARM: dts: qcom: msm8974: Split out common part of samsung-klte
ARM: dts: qcom: sdx55: Add PCIe bridge node
ARM: dts: qcom: apq8064: Add PCIe bridge node
ARM: dts: qcom: ipq4019: Add PCIe bridge node
ARM: dts: qcom: ipq8064: Add PCIe bridge node
ARM: dts: qcom: msm8974-sony-shinano: Enable vibrator
ARM: dts: qcom: ipq4019: add QCA8075 PHY Package nodes
ARM: dts: qcom: Add support for Motorola Moto G (2013)
dt-bindings: arm: qcom: Add Motorola Moto G (2013)
ARM: dts: qcom: msm8974: Add empty chosen node
ARM: dts: qcom: msm8974: Add @0 to memory node name
ARM: dts: qcom: Add Sony Xperia Z3 smartphone
ARM: dts: qcom: msm8974-sony-castor: Split into shinano-common
ARM: dts: qcom: msm8916: idle-state compatible require the generic idle-state
ARM: dts: qcom: include cpu in idle-state node names
ARM: dts: qcom: msm8974pro-castor: Rename wifi node name
ARM: dts: qcom: msm8974pro-castor: Add debounce-interval for keys
ARM: dts: qcom: msm8974pro-castor: Remove camera button definitions
...
Link: https://lore.kernel.org/r/20240427163625.1432458-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- new boards: RG35XX 2024, RG35XX-Plus, RG35XX-H
* tag 'sunxi-dt-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h700: Add RG35XX-H DTS
arm64: dts: allwinner: h700: Add RG35XX-Plus DTS
arm64: dts: allwinner: h700: Add RG35XX 2024 DTS
dt-bindings: arm: sunxi: document Anbernic RG35XX handheld gaming device variants
Link: https://lore.kernel.org/r/20240427133006.GA146501@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.10-rc1
Included is one change that adds the dma-coherent flag to the device
tree json-schema for host1x on Tegra194 and Tegra234.
* tag 'tegra-for-6.10-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: display: tegra: Allow dma-coherent on Tegra194 and later
Link: https://lore.kernel.org/r/20240426180519.3972626-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The patch titled ("powerpc: make fadump resilient with memory add/remove
events") has made significant changes to the implementation of fadump,
particularly on elfcorehdr creation and fadump crash info header
structure. Therefore, updating the fadump implementation documentation
to reflect those changes.
Following updates are done to firmware assisted dump documentation:
1. The elfcorehdr is no longer stored after fadump HDR in the reserved
dump area. Instead, the second kernel dynamically allocates memory
for the elfcorehdr within the address range from 0 to the boot memory
size. Therefore, update figures 1 and 2 of Memory Reservation during
the first and second kernels to reflect this change.
2. A version field has been added to the fadump header to manage the
future changes to fadump crash info header structure without changing
the fadump header magic number in the future. Therefore, remove the
corresponding TODO from the document.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240422195932.1583833-4-sourabhjain@linux.ibm.com
|
|
The elfcorehdr describes the CPUs and memory of the crashed kernel to
the kernel that captures the dump, known as the second or fadump kernel.
The elfcorehdr needs to be updated if the system's memory changes due to
memory hotplug or online/offline events.
Currently, memory hotplug events are monitored in userspace by udev
rules, and fadump is re-registered, which recreates the elfcorehdr with
the latest available memory in the system.
However, the previous patch ("powerpc: make fadump resilient with memory
add/remove events") moved the creation of elfcorehdr to the second or
fadump kernel. This eliminates the need to regenerate the elfcorehdr
during memory hotplug or online/offline events.
Create a sysfs entry at /sys/kernel/fadump/hotplug_ready to let
userspace know that fadump re-registration is not required for memory
add/remove events.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240422195932.1583833-3-sourabhjain@linux.ibm.com
|
|
Rename 'ov8856.yaml' as 'ovti,ov8856.yaml' and update the MAINTAINERS
file entry accordingly.
All the Omnivision sensor DT bindings have vendor prefix "ovti," to
their file name hence this renaming.
Link: https://lore.kernel.org/linux-media/20220916110955.23757-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
overview
Add a documentation for an overview of IPU6 hardware and describe the main
the components of IPU6 driver.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This document mainly describe the functionality of IPU6 and IPU6 isys
driver, and gives an example that how user can do imaging capture with
tools.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Introduce the dt-bindings documentation for bcm2835 CCP2/CSI2 Unicam
camera interface.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Co-developed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Co-developed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This is a packed grey-scale image format with a depth of 14 bits per
pixel. Every four consecutive samples are packed into seven bytes. Each
of the first four bytes contain the eight high order bits of the pixels,
and the three following bytes contains the six least significants bits
of each pixel, in the same order.
As the other formats only needed 5 bytes before, append two bytes in the
documentation array.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This is a packed grey-scale image format with a depth of 12 bits per
pixel. Two consecutive pixels are packed into 3 bytes. The first 2 bytes
contain the 8 high order bits of the pixels, and the 3rd byte contains
the 4 least significants bits of each pixel, in the same order.
Add the entry in userspace API, and document it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Return the routes set using S_ROUTING back to the user. Also reflect this
in documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The len_routes field is used to tell the size of the routes array in
struct v4l2_subdev_routing. This way the number of routes returned from
S_ROUTING IOCTL may be larger than the number of routes provided, in case
there are more routes returned by the driver.
Note that this uAPI is still disabled in the code, so this change can
safely be done. Anyone who manually patched the code to enable this uAPI
must update their code.
The patch also increases the number of reserved fields in struct
v4l2_subdev_routing.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Document S_ROUTING behaviour for different devices.
Generally in devices that produce streams the streams are static and some
can be enabled and disabled, whereas in devices that just transport them
or write them to memory, more configurability is allowed. Document this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Having extra streams on the source end of the link that cannot be captured
by the sink sub-device generally are not an issue, at least not on CSI-2
bus. Still document that there may be hardware-specific limitations. For
example on parallel bus this might not work on all cases.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Many camera sensors, among other devices, transmit embedded data and image
data for each CSI-2 frame. This embedded data typically contains register
configuration of the sensor that has been used to capture the image data
of the same frame.
The embedded data is received by the CSI-2 receiver and has the same
properties as the image data, including that it is line based: it has
width, height and bytesperline (stride).
Add these fields to struct v4l2_meta_format and document them.
Also add V4L2_FMT_FLAG_META_LINE_BASED to tell a given format is
line-based i.e. these fields of struct v4l2_meta_format are valid for it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Generic 8-bit metadata formats define the in-memory data layout but not
the format of the data itself. The reasoning for having such formats is to
allow CSI-2 receiver drivers to receive and DMA drivers to write the data
to memory without knowing a large number of device-specific formats.
These formats may be used only in conjunction with a Media Controller
pipeline where the internal pad of the source sub-device defines the
specific format of the data (using an mbus code).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Now that metadata mbus formats have been added, it is necessary to define
which fields in struct v4l2_mbus_format are applicable to them (not many).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add generic serial metadata mbus formats. These formats describe data
width and packing but not the content itself. The reason for specifying
such formats is that the formats as such are fairly device specific but
they are still handled by CSI-2 receiver drivers that should not be aware
of device specific formats. What makes generic metadata formats possible
is that these formats are parsed by software only, after capturing the
data to system memory.
Also add a definition for "Data Unit" to cover what is essentially a pixel
but is not image data.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add term "stream" to the glossary of the Media subsystem documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The V4L2 subdev crop API has been marked as obsolete, deprecated by the
selection API. Despite this, it has recently been extended with streams
support. In hindsight this was a mistake. Make sure it doesn't happen
again by clearly documenting that no new extensions will be accepted.
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- added multicolor LED node for pinephone
- marked pinephone LEDs to retain status in suspend
- DT cleanups & fixes
- fixed A64 GPU frequency at 432 MHz
- added H616 NMI node
- new boards: PocketBook 614 Plus, Tanix TX1
* tag 'sunxi-dt-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h616: Add NMI device node
arm64: dts: allwinner: Add Tanix TX1 support
dt-bindings: arm: sunxi: document Tanix TX1 name
ARM: dts: sun5i: Add PocketBook 614 Plus support
dt-bindings: arm: sunxi: Add PocketBook 614 Plus
arm64: dts: allwinner: h616: Fix I2C0 pins
arm64: dts: allwinner: a64: Run GPU at 432 MHz
arm: dts: allwinner: drop underscore in node names
arm64: dts: allwinner: Orange Pi: delete node by phandle
arm64: dts: allwinner: drop underscore in node names
arm64: dts: allwinner: Pine H64: correctly remove reg_gmac_3v3
arm64: dts: allwinner: pinephone: add multicolor LED node
arm64: dts: allwinner: pinephone: Retain LEDs state in suspend
Link: https://lore.kernel.org/r/20240426164510.GA101219@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: ArmSom Sige7, GameForce Chi,Forlinx FET3588-C with OK3588-C
baseboard, Protonic MECSBC, Wolfvision PF5.
The panthor driver for Mali Valhall GPUs landed, so a number of boards
enable their gpu (Cool Pi, Theobroma-Systems boards, QuartzPro64,
Rock5b, EVB1)
Also the USBDP phy driver landed, allowing the usb3 dual-role controllers
to be used on EVB1, Rock 5A and 5B, Indiedroid-Nova, Theobroma-Systems
Tiger and Jaguar.
A lot new peripherals for the Khadas Edge 2 (rtc, uart, sfc, adc, ir,
usb, pcie, tf-card, pmic); PCIe3 support on Jaguar, audio support for
the rk3308 and cache descriptions for rk356x and rk3328.
Corrected model names for boards from Radxa, Pine64, Powkiddy, Anberic
and general more dt cleanups.
* tag 'v6.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (64 commits)
arm64: dts: rockchip: add dual-role usb3 hosts to rk3588 Tiger-Haikou
arm64: dts: rockchip: add usb-id extcon on rk3588 tiger
arm64: dts: rockchip: fix comment for upper usb3 port
arm64: dts: rockchip: fix pcie-refclk frequency on rk3588 tiger
arm64: dts: rockchip: correct gpio_pwrctrl1 typos on rk3588(s) boards
arm64: dts: rockchip: Correct the model names for Pine64 boards
dt-bindings: arm: rockchip: Correct the descriptions for Pine64 boards
arm64: dts: rockchip: Add ArmSom Sige7 board
dt-bindings: arm: rockchip: Add ArmSoM Sige7
dt-bindings: vendor-prefixes: add ArmSoM
arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar
arm64: dts: rockchip: move uart2 pinmux to dtsi on rk3588-tiger
arm64: dts: rockchip: Add USB-C Support for rk3588s-indiedroid-nova
arm64: dts: rockchip: correct the model name for Radxa ROCK 3A
dt-bindings: arm: rockchip: correct the model name for Radxa ROCK 3A
arm64: dts: rockchip: Correct the model names for Radxa ROCK 5 boards
dt-bindings: arm: rockchip: Correct the descriptions for Radxa boards
arm64: dts: rockchip: add lower USB3 port to rock-5b
arm64: dts: rockchip: add upper USB3 port to rock-5a
arm64: dts: rockchip: add USB3 to rk3588-evb1
...
Link: https://lore.kernel.org/r/15361932.O9o76ZdvQC@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a new driver for the MSI WMI Platform interface. The underlying
ACPI WMI interface supports many features, but so far only reading
of fan speed sensors is implemented.
The driver was reverse-engineered based on a user request to the
lm-sensors project, see the github issue for details.
The ACPI WMI interface used by this driver seems to use the same
embedded controller interface as the msi-ec driver, but supports
automatic discovery of supported machines without relying on a
DMI whitelist.
The driver was tested by the user who created the github issue.
Closes: https://github.com/lm-sensors/lm-sensors/issues/475
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240421191145.3189-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This patch elaborates on the use of PC by expanding the PC acronym,
explaining the units, and the relative position to which the offset
applies.
Signed-off-by: Dave Thaler <dthaler1968@googlemail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20240426231126.5130-1-dthaler1968@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.10, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add and enable LTDC display (rocktech,rk043fn48h)
on stm32mp135f-dk.
- Add firewall bus based on ETZPC firewall controller.
- Add PWR regulator support: Can be only used if the platform is
set as "no-secure" (RCC_SECCFGR cleared) either use SCMI
regulator.
- STMP32MP15:
- Add firewall bus based on ETZPC firewall controller.
- Add heartbeat on stm32mp157c-ed1.
- STM32MP25:
- Add firewall bus based on RIFSC firewall controller.
- Add clock support (RCC) based on SCMI clock protocol for root clocks.
- Add all I2C instances and declare i2c2/i2c8 on stm32mp257f-ev1.
- Add all SPI instances. and declare spi3/spi8 on stm32mp257f-ev1.
* tag 'stm32-dt-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (21 commits)
arm64: dts: st: correct masks for GIC PPI interrupts on stm32mp25
arm64: dts: st: add spi3 / spi8 properties on stm32mp257f-ev1
arm64: dts: st: add spi3/spi8 pins for stm32mp25
arm64: dts: st: add all 8 spi nodes on stm32mp251
arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1
arm64: dts: st: add i2c2/i2c8 pins for stm32mp25
arm64: dts: st: add all 8 i2c nodes on stm32mp251
arm64: dts: st: add rcc support for STM32MP25
ARM: dts: stm32: enable display support on stm32mp135f-dk board
ARM: dts: stm32: add LTDC pinctrl on STM32MP13x SoC family
ARM: dts: stm32: add LTDC support for STM32MP13x SoC family
dt-bindings: display: simple: allow panel-common properties
ARM: dts: stm32: add PWR regulators support on stm32mp131
media: dt-bindings: add access-controllers to STM32MP25 video codecs
ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1
ARM: dts: stm32: move can3 node from stm32f746 to stm32f769
ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards
ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards
ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
...
Link: https://lore.kernel.org/r/2040767c-413e-4447-b354-c44999930e4c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.10
- Document support for the Renesas RZ/V2H(P) (R9A09G057) SoC variants.
* tag 'renesas-dt-bindings-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document Renesas RZ/V2H(P) System Controller
dt-bindings: soc: renesas: Document Renesas RZ/V2H(P) SoC variants
Link: https://lore.kernel.org/r/cover.1712915534.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix EEVDF corner cases
- Fix two nohz_full= related bugs that can cause boot crashes
and warnings
* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
sched/isolation: Prevent boot crash when the boot CPU is nohz_full
sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
sched/eevdf: Always update V if se->on_rq when reweighting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Make the CPU_MITIGATIONS=n interaction with conflicting
mitigation-enabling boot parameters a bit saner.
- Re-enable CPU mitigations by default on non-x86
- Fix TDX shared bit propagation on mprotect()
- Fix potential show_regs() system hang when PKE initialization
is not fully finished yet.
- Add the 0x10-0x1f model IDs to the Zen5 range
- Harden #VC instruction emulation some more
* tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n
cpu: Re-enable CPU mitigations by default for !X86 architectures
x86/tdx: Preserve shared bit on mprotect()
x86/cpu: Fix check for RDPKRU in __show_regs()
x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range
x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler
|
|
Add support for adm1281 which is similar to adm1275 and other chips
of the series.
Signed-off-by: Jose Ramon San Buenaventura <jose.sanbuenaventura@analog.com>
Link: https://lore.kernel.org/r/20240425070948.25788-3-jose.sanbuenaventura@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the adm1281 Hot-Swap Controller and Digital Power
and Energy Monitor
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jose Ramon San Buenaventura <jose.sanbuenaventura@analog.com>
Link: https://lore.kernel.org/r/20240425070948.25788-2-jose.sanbuenaventura@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for ADP1050 Digital Controller for Isolated Power Supplies
with PMBus interface Voltage, Current and Temperature Monitor.
The ADP1050 implements several features to enable a robust
system of parallel and redundant operation for customers who
require high availability. The device can measure voltage,
current and temperature that can be used in different
techniques to identify and safely shut down an erroneous
power supply in parallel operation mode.
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Link: https://lore.kernel.org/r/20240321142201.10330-2-radu.sabau@analog.com
[groeck: Fixed corrupted link in documentation]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add dt-bindings for adp1050 digital controller for isolated power supply
with pmbus interface voltage, current and temperature monitor.
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240321142201.10330-1-radu.sabau@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This binding meets the requirements to be converted to dtschema
via trivial-devices.yaml.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-5-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert existing binding to support validation.
This is a straightforward conversion with no new properties.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-4-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This binding was converted to dtschema a year ago.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-3-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert existing binding to support validation.
The binding has been renamed to match its compatible strings, with no
further additions.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-2-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert existing binding to support validation.
This is a straightforward conversion with now new properties.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-1-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert existing bindings to dtschema to support validation.
This is a straightforward conversion with no new properties.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240321-hwmon_yaml-v2-2-74fa8eb60ec9@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert existing bindings to dtschema to support validation.
This is a straightforward conversion with no new properties.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240320-hwmon_yaml-v1-1-a349ca21ccab@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Update links in the documentation and in-code comments which point to
the datasheet.
The current links don't work because National Semiconductor (which is the
original manufacturer of this chip) has been a part of Texas Instruments
since 2011 and http://www.national.com/ doesn't work anymore.
Fixes: e1a8e913f97e ("[PATCH] lm70: New hardware monitoring driver")
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Link: https://lore.kernel.org/r/20240318154540.90613-3-five231003@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert adc128d818 bindings to dtschema to support validation.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240319-adc128d818_dtschema-v2-1-0824a6d69493@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:
08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full").
However after:
aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.
Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.
This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.
There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).
Fixes: aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
|
|
Pull Rust fixes from Miguel Ojeda:
- Soundness: make internal functions generated by the 'module!' macro
inaccessible, do not implement 'Zeroable' for 'Infallible' and
require 'Send' for the 'Module' trait.
- Build: avoid errors with "empty" files and workaround 'rustdoc' ICE.
- Kconfig: depend on '!CFI_CLANG' and avoid selecting 'CONSTRUCTORS'.
- Code docs: remove non-existing key from 'module!' macro example.
- Docs: trivial rendering fix in arch table.
* tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux:
rust: remove `params` from `module` macro example
kbuild: rust: force `alloc` extern to allow "empty" Rust files
kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICE
rust: kernel: require `Send` for `Module` implementations
rust: phy: implement `Send` for `Registration`
rust: make mutually exclusive with CFI_CLANG
rust: macros: fix soundness issue in `module!` macro
rust: init: remove impl Zeroable for Infallible
docs: rust: fix improper rendering in Arch Support page
rust: don't select CONSTRUCTORS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fix a race condition in the at24 eeprom handler, a NULL pointer
exception in the I2C core for controllers only using target modes,
drop a MAINTAINERS entry, and fix an incorrect DT binding for at24"
* tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: fix NULL function pointer dereference
MAINTAINERS: Drop entry for PCA9541 bus master selector
eeprom: at24: fix memory corruption race condition
dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema
|
|
variants
RG35XX 2024: Base version with Allwinner H700
RG35XX Plus: Adds Wifi/BT
RG35XX H: Adds second USB port and analog sticks to -Plus in horizontal form factor
Use three separate device descriptions rather than enum as per existing sunxi binding style.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240427110225.727472-4-ryan@testtoast.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Virtual Machine Generation ID driver was introduced in commit
af6b54e2b5ba ("virt: vmgenid: notify RNG of VM fork and supply
generation ID"), as an ACPI only device.
VMGenID specification http://go.microsoft.com/fwlink/?LinkId=260709
defines a mechanism for the BIOS/hypervisors to communicate to the
virtual machine that it is executed with a different configuration (e.g.
snapshot execution or creation from a template). The guest operating
system can use the notification for various purposes such as
re-initializing its random number generator etc.
As per the specs, hypervisor should provide a globally unique
identified, or GUID via ACPI.
This patch tries to mimic the mechanism to provide the same
functionality which is for a hypervisor/BIOS to notify the virtual
machine when it is executed with a different configuration.
As part of this support the devicetree bindings requires the hypervisors
or BIOS to provide a memory address which holds the GUID and an IRQ
which is used to notify when there is a change in the GUID. The memory
exposed in the DT should follow the rules defined in the vmgenid spec
mentioned above.
Reason for this change: Chosing ACPI or devicetree is an intrinsic part
of an hypervisor design. Without going into details of why a hypervisor
would chose DT over ACPI, we would like to highlight that the
hypervisors that have chose devicetree and now want to make use of the
vmgenid functionality cannot do so today because vmgenid is an ACPI only
device. This forces these hypervisors to change their design which
could have undesirable impacts on their use-cases, test-scenarios etc.
The point of vmgenid is to provide a mechanism to discover a GUID when
the execution state of a virtual machine changes and the simplest way to
do it is pass a memory location and an interrupt via devicetree. It
would complicate things unnecessarily if instead of using devicetree, we
try to implement a new protocol or modify other protocols to somehow
provide the same functionility.
We believe that adding a devicetree binding for vmgenid is a simpler,
better alternative to provide the same functionality and will allow such
hypervisors as mentioned above to continue using devicetree.
More references to the vmgenid specs are found below.
Signed-off-by: Sudan Landge <sudanl@amazon.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Link: https://www.qemu.org/docs/master/specs/vmgenid.html
Link: https://learn.microsoft.com/en-us/windows/win32/hyperv_v2/virtual-machine-generation-identifier
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a lot of minor DT fixes for Mediatek, Rockchip, Qualcomm and
Microchip and NXP, addressing both build-time warnings and bugs found
during runtime testing.
Most of these changes are machine specific fixups, but there are a few
notable regressions that affect an entire SoC:
- The Qualcomm MSI support that was improved for 6.9 ended up being
wrong on some chips and now gets fixed.
- The i.MX8MP camera interface broke due to a typo and gets updated
again.
The main driver fix is also for Qualcomm platforms, rewriting an
interface in the QSEECOM firmware support that could lead to crashing
the kernel from a trusted application.
The only other code changes are minor fixes for Mediatek SoC drivers"
* tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: dts: imx6ull-tarragon: fix USB over-current polarity
soc: mediatek: mtk-socinfo: depends on CONFIG_SOC_BUS
soc: mediatek: mtk-svs: Append "-thermal" to thermal zone names
arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
ARM: dts: microchip: at91-sama7g54_curiosity: Replace regulator-suspend-voltage with the valid property
ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
arm64: dts: qcom: sm8650: Fix the msi-map entries
arm64: dts: qcom: sm8550: Fix the msi-map entries
arm64: dts: qcom: sm8450: Fix the msi-map entries
arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
...
|
|
Add compatible strings list for SAM9X7.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223172619.672262-1-varshini.rajendran@microchip.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
The ACPI namespace has always started with LNXSYSTM, not LNXSYSTEM.
Fix the documentation accordingly.
Signed-off-by: John Watts <contact@jookia.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into for-next
* 'v6.9-armsoc/dtsfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
arm64: dts: rockchip: Designate the system power controller on QuartzPro64
arm64: dts: rockchip: drop panel port unit address in GRU Scarlet
arm64: dts: rockchip: Remove unsupported node from the Pinebook Pro dts
arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi CM5
arm64: dts: rockchip: add regulators for PCIe on RK3399 Puma Haikou
arm64: dts: rockchip: enable internal pull-up on PCIE_WAKE# for RK3399 Puma
arm64: dts: rockchip: enable internal pull-up on Q7_USB_ID for RK3399 Puma
arm64: dts: rockchip: fix alphabetical ordering RK3399 puma
arm64: dts: rockchip: enable internal pull-up for Q7_THRM# on RK3399 Puma
arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f
Link: https://lore.kernel.org/r/3413596.CbtlEUcBR6@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Tegra194 and later chips have a coherency fabric, so some devices can be
marked as DMA coherent to avoid unnecessary cache maintenance.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Translate process/cve.rst into Chinese and add it to
Documentation/translations/zh_CN directory.
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240422041115.2439166-1-dzm91@hust.edu.cn
|
|
In the near future, I will not have access to the email address I used as
maintainer of a number of things, mostly in the documentation. Update that
address to my personal email address (see Link) so I can continue
contributing and update .mailmap.
Link: https://lore.kernel.org/all/BL1PR12MB58749FF2BFEDB817DE1FE6CBF82A2@BL1PR12MB5874.namprd12.prod.outlook.com/
Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/139b8cab-009c-4688-be41-c4c526532ea1@amd.com
|
|
Add compatible for EPSS CPUFREQ-HW on SM4450.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
|
|
Document support for the I/O Memory Management Unit (IPMMU) on the
Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Thanh Le <thanh.le.xv@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/13643259be4e8a8e30632de622ad7c685dbb7c61.1713526852.git.geert+renesas@glider.be
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Restore alphabetical sort order of the list of supported compatible
values.
Fixes: 2ccf7a5d9c50f3ea ("dt-bindings: crypto: starfive: Add jh8100 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add optional gpio-ranges device-tree property to the Broadcom
Set-Top-Box GPIO controller.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240424185039.1707812-2-opendmb@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v6.9-rc6
- move the nvmem registration after the test one-byte read to improve the
situation with a race condition in nvmem
- fix the DT schema for ST M24C64-D
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.10
1. Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
2. Add GAMMA 12-bit LUT support for MT8188
3. Add 0 size check to mtk_drm_gem_obj
4. Init `ddp_comp` with devm_kcalloc()
5. Rename mtk_drm_* to mtk_*
6. Drop driver owner initialization
7. Fix mtk_dp_aux_transfer return value
8. Correct calculation formula of PHY Timing
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425153859.3579-1-chunkuang.hu@kernel.org
|
|
Introduce "max_pages" param to recompress device attribute which sets an
upper limit on the number of entries (pages) zram attempts to recompress
(in this particular recompression call). S/W recompression can be quite
expensive so limiting the number of pages recompress touches can be quite
helpful.
Link: https://lkml.kernel.org/r/20240329094050.2815699-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Implements the "init_mlocked_on_free" boot option. When this boot option
is enabled, any mlock'ed pages are zeroed on free. If
the pages are munlock'ed beforehand, no initialization takes place.
This boot option is meant to combat the performance hit of
"init_on_free" as reported in commit 6471384af2a6 ("mm: security:
introduce init_on_alloc=1 and init_on_free=1 boot options"). With
"init_mlocked_on_free=1" only relevant data is freed while everything
else is left untouched by the kernel. Correspondingly, this patch
introduces no performance hit for unmapping non-mlock'ed memory. The
unmapping overhead for purely mlocked memory was measured to be
approximately 13%. Realistically, most systems mlock only a fraction of
the total memory so the real-world system overhead should be close to
zero.
Optimally, userspace programs clear any key material or other
confidential memory before exit and munlock the according memory
regions. If a program crashes, userspace key managers fail to do this
job. Accordingly, no munlock operations are performed so the data is
caught and zeroed by the kernel. Should the program not crash, all
memory will ideally be munlocked so no overhead is caused.
CONFIG_INIT_MLOCKED_ON_FREE_DEFAULT_ON can be set to enable
"init_mlocked_on_free" by default.
Link: https://lkml.kernel.org/r/20240329145605.149917-1-yjnworkstation@gmail.com
Signed-off-by: York Jasper Niebuhr <yjnworkstation@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: York Jasper Niebuhr <yjnworkstation@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Mostly rewording, but remove entirely the copy of page_fixed_fake_head()
in the documentation; we can refer people to the actual source if
necessary.
Link: https://lkml.kernel.org/r/20240326171045.410737-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add some description of the hugetlb migration strategy.
Link: https://lkml.kernel.org/r/63fb16e7a4ebc5cb69ce655af86e29b2d8e9ba34.1709719720.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Provide documentation for memory allocation profiling.
Link: https://lkml.kernel.org/r/20240321163705.3067592-38-surenb@google.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce CONFIG_MEM_ALLOC_PROFILING which provides definitions to easily
instrument memory allocators. It registers an "alloc_tags" codetag type
with /proc/allocinfo interface to output allocation tag information when
the feature is enabled.
CONFIG_MEM_ALLOC_PROFILING_DEBUG is provided for debugging the memory
allocation profiling instrumentation.
Memory allocation profiling can be enabled or disabled at runtime using
/proc/sys/vm/mem_profiling sysctl when CONFIG_MEM_ALLOC_PROFILING_DEBUG=n.
CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT enables memory allocation
profiling by default.
[surenb@google.com: Documentation/filesystems/proc.rst: fix allocinfo title]
Link: https://lkml.kernel.org/r/20240326073813.727090-1-surenb@google.com
[surenb@google.com: do limited memory accounting for modules with ARCH_NEEDS_WEAK_PER_CPU]
Link: https://lkml.kernel.org/r/20240402180933.1663992-2-surenb@google.com
[klarasmodin@gmail.com: explicitly include irqflags.h in alloc_tag.h]
Link: https://lkml.kernel.org/r/20240407133252.173636-1-klarasmodin@gmail.com
[surenb@google.com: fix alloc_tag_init() to prevent passing NULL to PTR_ERR()]
Link: https://lkml.kernel.org/r/20240417003349.2520094-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-14-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Co-developed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Klara Modin <klarasmodin@gmail.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.10-rc1:
UAPI Changes:
Cross-subsystem Changes:
- Devicetree updates for rockchip (#sound-dai-cells)
- Add dt bindings for new panels.
- Change bridge/tc358775 dt bindings.
Core Changes:
- Fix SIZE_HINTS cursor property doc.
- Parse topology blocks for all DispID < 2.0.
- Implement support for tracking cleared free memory, use it in amdgpu.
- Drop seq_file.h from drm_print.h, and include debugfs.h explicitly
where needed (drivers).
Driver Changes:
- Small fixes to rockchip, panthor, v3d, bridge chaining, xlx.
- Add Khadas TS050 V2, EDO RM69380 OLED, CSOT MNB601LS1-1 panels,
- Add SAM9X7 SoC's LVDS controller.
- More driver conversions to struct drm_edid.
- Support tc358765 in tc358775 bridge.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ab99848-8fb8-41a6-8967-c4ce6f3634fd@linux.intel.com
|
|
The proposed intro paragraph text is derived from the first paragraph
of the IETF BPF WG charter at https://datatracker.ietf.org/wg/bpf/about/
Signed-off-by: Dave Thaler <dthaler1968@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240422190942.24658-1-dthaler1968@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Convert the fsl,ssi binding to YAML.
Add below compatible strings which were not listed
in document:
fsl,imx50-ssi
fsl,imx53-ssi
fsl,imx25-ssi
fsl,imx27-ssi
fsl,imx6q-ssi
fsl,imx6sl-ssi
fsl,imx6sx-ssi
Add below fsl,mode strings which were not listed.
i2s-slave
i2s-master
lj-slave
lj-master
rj-slave
rj-master
Add 'ac97-gpios' property which were not listed.
Then dtbs_check can pass.
And remove the 'codec' description which should be
in the 'codec' binding doc.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/1714026906-16723-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_prueth.c
net/mac80211/chan.c
89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link")
87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()")
https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/
net/unix/garbage.c
1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
drivers/net/ethernet/ti/icssg/icssg_prueth.c
drivers/net/ethernet/ti/icssg/icssg_common.c
4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()")
e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RZ/G3S
The driver will be modified (in the next commits) to be able to specify
individual power domain IDs for each IP. The driver will still
support #power-domain-cells = <0>, thus, previous users are not
affected.
The #power-domain-cells = <1> has been instantiated only for RZ/G3S at
the moment, as individual platform clock drivers need to be adapted for
this to be supported on the rest of the SoCs.
Also, the description for #power-domain-cells is updated with links to
per-SoC power domain IDs.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240422105355.1622177-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Explicitly disallow enabling mitigations at runtime for kernels that were
built with CONFIG_CPU_MITIGATIONS=n, as some architectures may omit code
entirely if mitigations are disabled at compile time.
E.g. on x86, a large pile of Kconfigs are buried behind CPU_MITIGATIONS,
and trying to provide sane behavior for retroactively enabling mitigations
is extremely difficult, bordering on impossible. E.g. page table isolation
and call depth tracking require build-time support, BHI mitigations will
still be off without additional kernel parameters, etc.
[ bp: Touchups. ]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240420000556.2645001-3-seanjc@google.com
|
|
This device inherits properties from panel-common. Those should be allowed
to use, instead of specifying properties to true for each specific use.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add dt-schema documentation and clock IDs for the high speed interface
0 HSI0 clock management unit. This is used (amongst others) for USB.
While the usual (sed) script has been used to derive the linux clock
IDs from the data sheet, one manual tweak was applied to fix a typo
which we don't want to carry:
HSI0_USPDPDBG_USER -> HSI0_USBDPDBG_USER (note USB vs USP).
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240423-hsi0-gs101-v1-1-2c3ddb50c720@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: Support 5 layer Tx scheduler topology
Mateusz Polchlopek says:
For performance reasons there is a need to have support for selectable
Tx scheduler topology. Currently firmware supports only the default
9-layer and 5-layer topology. This patch series enables switch from
default to 5-layer topology, if user decides to opt-in.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Document tx_scheduling_layers parameter
ice: Add tx_scheduling_layers devlink param
ice: Enable switching default Tx scheduler topology
ice: Adjust the VSI/Aggregator layers
ice: Support 5 layer topology
devlink: extend devlink_param *set pointer
====================
Link: https://lore.kernel.org/r/20240422203913.225151-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Translate dev-tools/kcov into Chinese and add it in
dev-tools/zh_CN/index.rst.
Signed-off-by: Haoyang Liu <tttturtleruss@hust.edu.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240421142021.19504-1-tttturtleruss@hust.edu.cn
|
|
Commit 839195352d82 ("mm/shuffle: remove dynamic reconfiguration")
removed the dynamic reconfiguration capabilities from the shuffle page
allocator. This means that, now, we don't have any perspective of an
"autodetection of memory-side-cache" that triggers the enablement of the
shuffle page allocator.
Therefore, let the documentation reflect that the only way to enable
the shuffle page allocator is by setting `page_alloc.shuffle=1`.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240422142007.1062231-1-mcanal@igalia.com
|
|
sched_core_share_pid() copies the cookie to userspace with
put_user(id, (u64 __user *)uaddr), expecting 64 bits of space.
The "unsigned long" datatype that is documented in core-scheduling.rst
however is only 32 bits large on 32 bit architectures.
Document "unsigned long long" as the correct data type that is always
64bits large.
This matches what the selftest cs_prctl_test.c has been doing all along.
Fixes: 0159bb020ca9 ("Documentation: Add usecases, design and interface for core scheduling")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/util-linux/df7a25a0-7923-4f8b-a527-5e6f0064074d@t-8ch.de/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Chris Hyser <chris.hyser@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240423-core-scheduling-cookie-v1-1-5753a35f8dfc@weissschuh.net
|
|
Add ASUS RT-AC5300 under BCM47094 based boards.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240423-for-soc-asus-rt-ac3200-ac5300-v3-2-23d33cfafe7a@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Add ASUS RT-AC3200 under BCM4709 based boards.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240423-for-soc-asus-rt-ac3200-ac5300-v3-1-23d33cfafe7a@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
In our production environment, after removing monitor groups, those
unused RMIDs get stuck in the limbo list forever because their
llc_occupancy is always larger than the threshold. But the unused RMIDs
can be successfully freed by turning up the threshold.
In order to know how much the threshold should be, perf can be used to
acquire the llc_occupancy of RMIDs in each rdt domain.
Instead of using perf tool to track llc_occupancy and filter the log
manually, it is more convenient for users to use tracepoint to do this
work. So add a new tracepoint that shows the llc_occupancy of busy RMIDs
when scanning the limbo list.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240408092303.26413-3-haifeng.xu@shopee.com
|
|
The JPEG decoder/encoder present in iMX8QXP and iMX8QM SoCs need
the PER and IPG clocks to be functional, so add the clock entries.
This also fixes the following schema warning:
imx8qm-apalis-eval.dtb: jpegdec@58400000: 'assigned-clock-rates', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The error that V4L2 returns when an attempt is made to open an
unregisted device node is ENODEV, no ENXIO. Update the documentation.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
If the CEC device is unregistered, then an attempt to open
the device node should result in an -ENODEV error instead of
-ENXIO.
Document this as well in cec-func-open.rst.
This is consistent with the error code returned by other
file operations such as ioctl.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The optional shift of the clock used by thermal/hw load avg has been
introduced to handle case where the signal was not always a high frequency
hw signal. Now that cpufreq provides a signal for firmware and
SW pressure, we can remove this exception and always keep this PELT signal
aligned with other signals.
Mark sysctl_sched_migration_cost boot parameter as deprecated
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20240326091616.3696851-6-vincent.guittot@linaro.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.9 cycle.
adi,asdis16475
- Write the correct field in the register when setting the sync mode.
bosch,bmp280
- Wrong chip specific data being used for the bme280 in the SPI driver.
- Fix that we can't use chip IDs because Bosch reuses them for incompatible
devices (some require a padding byte, others don't).
maxim,max30102 (dt binding)
- Fix incorrect property check to actually match on a device from the
binding rather than a completely different one due to a typo.
memsic,mxc4005
- Fix wrong masking of interrupt register accidentally disabling temperature
compensation. Also hammer initial state to 0 as it's not documented
if interrupts are masked after reset.
- Explicit reset on probe() and resume() as some devices do not power up
correctly without a reset.
* tag 'iio-fixes-for-6.9a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio:imu: adis16475: Fix sync mode setting
iio: accel: mxc4005: Reset chip on probe() and resume()
iio: accel: mxc4005: Interrupt handling fixes
dt-bindings: iio: health: maxim,max30102: fix compatible check
iio: pressure: Fixes SPI support for BMP3xx devices
iio: pressure: Fixes BME280 SPI driver data
|
|
make dtbs_check:
arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dtb: sound@ec5a0000: compatible: 'oneOf' conditional failed, one must be fixed:
['renesas,rcar_sound-r8a779g0', 'renesas,rcar_sound-gen4'] is too short
...
'renesas,rcar_sound-r8a779h0' was expected
The list of SoC-specific compatible values for R-Car Gen4 SoCs is
mutually-exclusive, just like for other R-Car SoC generations, so it
should use an enum.
Fixes: d6e792ed7dd022a1 ("ASoC: dt-bindings: renesas: add R8A779H0 V4M")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/b3a6cf12c46b23a501b0d54c6892b969e2a55145.1713874657.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert NVIDIA Tegra20 AC97 binding to DT schema.
Change -gpio to -gpios in schema as "gpio" suffix is deprecated.
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240423115749.15786-1-sheharyaar48@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Remove unused flags (Francois Dugast)
- Extend uAPI to query HuC micro-controler firmware version (Francois Dugast)
- drm/xe/uapi: Define topology types as indexes rather than masks
(Francois Dugast)
- drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
(Francois Dugast)
- devcoredump updates. Some touching the output format.
(José Roberto de Souza, Matthew Brost)
- drm/xe/hwmon: Add infra to support card power and energy attributes
- Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst)
- drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper)
- Invalidate userptr VMA on page pin fault (Matthew Brost)
- Improve xe_bo_move tracepoint (Priyanka Danamudi)
- Align fence output format in ftrace log
Cross-driver Changes:
- drm/i915/hwmon: Get rid of devm (Ashutosh Dixit)
(Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>)
- drm/i915/display: convert inner wakeref get towards get_if_in_use
(SOB Rodrigo Vivi)
- drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref
(Committer, SOB Jani Nikula)
Driver Changes:
- Fix for unneeded CCS metadata allocation (Akshata Jahagirdar)
- Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda)
- A couple of build fixes (Arnd Bergmann)
- Fix register definition (Ashutosh Dixit)
- Add BMG mocs table (Balasubramani Vivekanandan)
- Replace sprintf() across driver (Bommu Krishnaiah)
- Add an xe2 workaround (Bommu Krishnaiah)
- Makefile fix (Dafna Hirschfeld)
- force_wake_get error value check (Daniele Ceraolo Spurio)
- Handle GSCCS ER interrupt (Daniele Ceraolo Spurio)
- GSC Workaround (Daniele Ceraolo Spurio)
- Build error fix (Dawei Li)
- drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast)
- Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala,
Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada,
Vinay Belgaumkar, Badal Nilawar)
- xe2hpg compression (Himal Ghimiray Prasad)
- Error code cleanups and fixes (Himal Prasad Ghimiray)
- struct xe_device cleanup (Jani Nikula)
- Avoid validating bos when only requesting an exec dma-fence
(José Roberto de Souza)
- Remove debug message from migrate_clear (José Roberto de Souza)
- Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza)
- Mark dpt and related vma as uncached (Juha-Pekka Heikkila)
- Hwmon updates (Karthik Poosa)
- KConfig fix when ACPI_WMI selcted (Lu Yao)
- Update intel_uncore_read*() return types (Luca Coelho)
- Mocs updates (Lucas De Marchi, Matt Roper)
- Drop dynamic load-balancing workaround (Lucas De Marchi)
- Fix a PVC workaround (Lucas De Marchi)
- Group live kunit tests into a single module (Lucas De Marchi)
- Various code cleanups (Lucas De Marchi)
- Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock
(Maarten Lankhorst)
- Fix a bo leak (Marten Lankhorst)
- Add LRC parsing for more GPU instructions (Matt Roper)
- Add various definitions for hardware and IP (Matt Roper)
- Define all possible engines in media IP descriptors (Matt Roper)
- Various cleanups, asserts and code fixes (Matthew Auld)
- Various cleanups and code fixes (Matthew Brost)
- Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni)
- Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost)
- Handle timing out of already signaled jobs gracefully (Matthew Brost)
- Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost)
- Do not grab forcewakes when issuing GGTT TLB invalidation via GuC
(Matthew Brost)
- Drop ggtt invalidate from display code (Matthew Brost)
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost)
- Add debug messages for MMU notifier and VMA invalidate (Matthew Brost)
- Use ordered wq for preempt fence waiting (Matthew Brost)
- Initial development for SR-IOV support including some refactoring
(Michal Wajdeczko)
- Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko)
- Move userptr over to start using hmm_range_fault (Oak Zeng)
- Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli)
- Pcode - and VRAM initialization check update (Riana Tauro)
- Large PM update including i915 display patches, and a fix for one of those.
(Rodrigo Vivi)
- Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan)
- GSC / HDCP updates (Suraj Kandpal)
- Minor code cleanup (Tejas Upadhyay)
- Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop
(Thomas Hellström)
- Backmerge (Thomas Hellström)
- GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG
# v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0
# vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM=
# =HouD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Apr 2024 22:42:29 AEST
# gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF
# gpg: Can't check signature: No public key
# Conflicts:
# drivers/gpu/drm/xe/xe_device_types.h
# drivers/gpu/drm/xe/xe_vm.c
# drivers/gpu/drm/xe/xe_vm_types.h
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zievlb1wvqDg1ovi@fedora
|
|
Convert the .txt documentation to .yaml with some adjustments.
* APQ8064/IPQ8064/MSM8960 compatibles are dropped since their HFPLLs are
a part of GCC so there is no need for a separate compat entry.
* Change the MSM8974 compatible to follow the updated naming schema.
Theis compatible is not used upstream yet.
* Add qcs404-hfpll. QCS404 currently uses qcom,hfpll. Mark that as
deprecated since every SoC appears to need different driver data so
"qcom,hfpll" makes no sense to keep
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240218-hfpll-yaml-v2-1-31543e0d6261@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Having to filter the right ifindex in the tests is a bit tedious.
Add support for dumping qstats for a single ifindex.
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240420023543.3300306-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Squash warnings such as:
```
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/watchdog@1e785000: failed to match any schema with compatible: ['aspeed,ast2400-wdt']
```
The schema binding additionally defines the clocks property over the
prose binding to align with use of the node in the DTS files.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240403020439.418788-1-andrew@codeconstruct.com.au
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add binding for the H616 NMI controller.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240418181615.1370179-2-macroalpha82@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Document support for the Interrupt Controller for External Devices
(INT-EX) in the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/264cffccfbb1f92657420f5f869236b06a97d958.1713280616.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The tc358765 is similar to tc358775. The tc358765 just an earlier version
of the hardware, and it's pin and register compatible with tc358775 for
most part.
From the binding point of view the only difference is that the tc358765
does not have stdby-gpios.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-4-tony@atomide.com
|
|
The device uses a clock lane, and 1 to 4 DSI data lanes. Let's add the
data-lanes property starting at 1 similar to what the other bridge
bindings are doing.
Let's also drop the data-lanes properties in the example for the DSI host
controller to avoid confusion. The configuration of the DSI host depends
on the controller used and is unrelated to the bridge binding.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-3-tony@atomide.com
|
|
For a normal operation, the stby GPIO is not needed.
The reset pin is required because once the PPI (PHY protocol interface)
is started, it can only be stopped by asserting the reset pin.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[tony@atomide.com: dropped regulator related changes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-2-tony@atomide.com
|
|
Correct the descriptions of a few Pine64 boards and devices, according
to their official names used on the Pine64 wiki. This ensures consistency
between the officially used names and the names in the source code.
Cc: Marek Kraus <gamiee@pine64.org>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/ec124dab2b1a8776aa39177ecce34babca3a50e2.1713832790.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add devicetree binding for ArmSoM Sige7 board
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Weizhao Ouyang <weizhao.ouyang@arm.com>
Link: https://lore.kernel.org/r/20240420034300.176920-3-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add vendor prefix for ArmSoM (https://www.armsom.org)
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Weizhao Ouyang <weizhao.ouyang@arm.com>
Link: https://lore.kernel.org/r/20240420034300.176920-2-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
According to https://radxa.com/products/rock3/3a,
the name of this board should be "Radxa ROCK 3A".
Suggested-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240419103019.992586-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Correct the descriptions of a few Radxa boards, according to the up-to-date
documentation from Radxa and the detailed explanation from Naoki. [1] To sum
it up, the short naming, as specified by Radxa, is preferred.
[1] https://lore.kernel.org/linux-rockchip/B26C732A4DCEA9B3+282b8775-601b-4d4a-a513-4924b7940076@radxa.com/
Suggested-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/1e148d6cd4486b31b5e7f3824cf6bccf536b74c0.1713457260.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Document Samsung Galaxy S5 China (kltechn) as a klte variant based on
msm8974pro. Also including "samsung,klte" in the compatible chain as
kltechn works fine with the klte DTB except for LEDs and WiFi missing.
Signed-off-by: Rong Zhang <i@rong.moe>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240213110137.122737-4-i@rong.moe
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The temperature output register of the Loongson-2K2000 is defined in the
chip configuration domain, which is different from the Loongson-2K1000,
so it can't be fallbacked.
We need to use two groups of registers to describe it: the first group
is the high and low temperature threshold setting register; the second
group is the temperature output register.
It is true that this fix will cause ABI corruption, but it is necessary
otherwise the Loongson-2K2000 temperature sensor will not work properly.
Fixes: 72684d99a854 ("thermal: dt-bindings: add loongson-2 thermal")
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/5198999d679f1a1c3457385acb9fadfc85da1f1e.1713837379.git.zhoubinbin@loongson.cn
|
|
The thermal on the Loongson-2K0500 shares the design with the
Loongson-2K1000. Define corresponding compatible string, having the
loongson,ls2k1000-thermal as a fallback.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/26524a63abd2d032e4c45efe6ce3fedb46841768.1713837379.git.zhoubinbin@loongson.cn
|
|
MT8188
Add LVTS thermal controller definition for MT8188.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-13-nico@fluxnic.net
|
|
MT8186
Add LVTS thermal controller definition for MT8186.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-7-nico@fluxnic.net
|
|
Provide right compatible properties for Amlogic A1 Thermal Sensor
controller. A1 family supports only one thermal node - CPU thermal
sensor.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240328191322.17551-2-ddrokosov@salutedevices.com
|
|
'st,passive_colling_temp' does not appear in the device-tree, 'reg' and
'#thermal-sensor-cells' are also missing in the device description.
Convert st,stih407-thermal binding to DT schema format in order to clean
unused 'st,passive_cooling_temp' and add missing properties.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240320-thermal-v3-1-700296694c4a@gmail.com
|
|
Document the QCM2290 LMH.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240308-topic-rb1_lmh-v2-1-bac3914b0fe3@linaro.org
|
|
Add the 'sam9x75-lvds' compatible binding, which describes the Low Voltage
Differential Signaling (LVDS) Controller found on some Microchip's sam9x7
series System-on-Chip (SoC) devices. This binding will be used to define
the properties and configuration for the LVDS Controller in DT.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240421011050.43265-2-dharma.b@microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-2-dharma.b@microchip.com
|
|
Maíra needs a backmerge to apply v3d patches, and Danilo for some
nouveau patches.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Convert mt2701-wm890 bindings from text to dtschema. This is used by
MediaTek mt7623a/n SoC.
Signed-off-by: Kartik Agarwala <agarwala.kartik@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240421033129.13076-1-agarwala.kartik@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Masahiro pointed out the use of if_changed_rule is incorrect and command
line changes are not correctly accounted for.
To fix this, split up the DT binding validation target,
dt_binding_check, into multiple rules for each step: yamllint, schema
validtion with meta-schema, and building the processed schema.
One change in behavior is the yamllint or schema validation will be
re-run again when there are warnings present.
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/all/20220817152027.16928-1-masahiroy@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Instead of stripping off the $(srctree) multiple times do it once up
front, but keep the src/obj path as it is going to be needed in
subsequent commit.
Rename the variable to CHK_DT_EXAMPLES to better reflect what it
contains.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add a spec for nftables that has nearly complete coverage of the ops,
but limited coverage of rule types and subexpressions.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mapping of EXTI events to its parent interrupt controller is both SoC
and instance dependent.
The current implementation requires adding a new mapping table to the
driver's code and a new compatible for each new EXTI instance.
To avoid that use the interrupts-extended property to list, for each EXTI
event, the associated parent interrupt.
Co-developed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240415134926.1254428-3-antonio.borneo@foss.st.com
|
|
New driver specific parameter 'tx_scheduling_layers' was introduced.
Describe parameter in the documentation.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Pull documentation fixes from Jonathan Corbet:
"A set of updates from Thorsten to his (new) guide to verifying bugs
and tracking down regressions"
* tag 'docs-6.9-fixes2' of git://git.lwn.net/linux:
docs: verify/bisect: stable regressions: first stable, then mainline
docs: verify/bisect: describe how to use a build host
docs: verify/bisect: explain testing reverts, patches and newer code
docs: verify/bisect: proper headlines and more spacing
docs: verify/bisect: add and fetch stable branches ahead of time
docs: verify/bisect: use git switch, tag kernel, and various fixes
|
|
Document the displayport controller subnode of the SM6350 MDSS.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/585468/
Link: https://lore.kernel.org/r/20240329-sm6350-dp-v2-2-e46dceb32ef5@fairphone.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add the compatible string for the DisplayPort controller on SM6350 which
is compatible with the one on SM8350.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Patchwork: https://patchwork.freedesktop.org/patch/585469/
Link: https://lore.kernel.org/r/20240329-sm6350-dp-v2-1-e46dceb32ef5@fairphone.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
A new sysfs attribute, ap_config, for the vfio_ap driver is
documented.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-6-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
i.MX95 DISPLAY_MASTER_CSR includes registers to control DSI clock settings,
clock gating, and pixel link select. Add dt-schema for it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240401-imx95-blk-ctl-v6-3-84d4eca1e759@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
i.MX95 includes BLK CTL module in several MIXes, such as VPU_CSR in
VPUMIX, CAMERA_CSR in CAMERAMIX and etc.
The BLK CTL module is used for various settings of a specific MIX, such
as clock, QoS and etc.
This patch is to add some BLK CTL modules that has clock features.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240401-imx95-blk-ctl-v6-2-84d4eca1e759@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Absolute path to other DT schema is preferred over relative one.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Allow properties from video-interface-devices. This aligns the bindings
to sony,imx415.yaml. Changes inspired by commit e2e73ed46c395 ("media:
dt-bindings: sony,imx415: Allow props from video-interface-devices")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Raydium RM69380 is a display driver IC used to drive OLED DSI panels.
Add a dt-binding for it.
Signed-off-by: David Wronek <david@mainlining.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240417-raydium-rm69380-driver-v4-1-e9c2337d0049@mainlining.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417-raydium-rm69380-driver-v4-1-e9c2337d0049@mainlining.org
|
|
This add the bindings for the Khadas TS050 V2 1080x1920 5" LCD DSI panel
designed to work with the Khadas VIM3 and VIM3L Single Board Computers.
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240419014852.715125-2-jacobe.zang@wesion.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419014852.715125-2-jacobe.zang@wesion.com
|
|
Linux 6.9-rc5
I've had a persistent msm failure on clang, and the fix is in fixes
so just pull it back to fix that.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Add "fsl,imx8ulp-usbmisc" compatible.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
