diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/ABI/testing/sysfs-bus-cxl | 34 | ||||
-rw-r--r-- | Documentation/firmware-guide/acpi/apei/einj.rst | 34 |
2 files changed, 68 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index fff2581b80335..3f5627a1210a1 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -552,3 +552,37 @@ Description: attribute is only visible for devices supporting the capability. The retrieved errors are logged as kernel events when cxl_poison event tracing is enabled. + + +What: /sys/bus/cxl/devices/regionZ/accessY/read_bandwidth + /sys/bus/cxl/devices/regionZ/accessY/write_banwidth +Date: Jan, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) The aggregated read or write bandwidth of the region. The + number is the accumulated read or write bandwidth of all CXL memory + devices that contributes to the region in MB/s. It is + identical data that should appear in + /sys/devices/system/node/nodeX/accessY/initiators/read_bandwidth or + /sys/devices/system/node/nodeX/accessY/initiators/write_bandwidth. + See Documentation/ABI/stable/sysfs-devices-node. access0 provides + the number to the closest initiator and access1 provides the + number to the closest CPU. + + +What: /sys/bus/cxl/devices/regionZ/accessY/read_latency + /sys/bus/cxl/devices/regionZ/accessY/write_latency +Date: Jan, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) The read or write latency of the region. The number is + the worst read or write latency of all CXL memory devices that + contributes to the region in nanoseconds. It is identical data + that should appear in + /sys/devices/system/node/nodeX/accessY/initiators/read_latency or + /sys/devices/system/node/nodeX/accessY/initiators/write_latency. + See Documentation/ABI/stable/sysfs-devices-node. access0 provides + the number to the closest initiator and access1 provides the + number to the closest CPU. diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst index d6b61d22f5258..c52b9da08fa9a 100644 --- a/Documentation/firmware-guide/acpi/apei/einj.rst +++ b/Documentation/firmware-guide/acpi/apei/einj.rst @@ -32,6 +32,10 @@ configuration:: CONFIG_ACPI_APEI CONFIG_ACPI_APEI_EINJ +...and to (optionally) enable CXL protocol error injection set:: + + CONFIG_ACPI_APEI_EINJ_CXL + The EINJ user interface is in <debugfs mount point>/apei/einj. The following files belong to it: @@ -118,6 +122,24 @@ The following files belong to it: this actually works depends on what operations the BIOS actually includes in the trigger phase. +CXL error types are supported from ACPI 6.5 onwards (given a CXL port +is present). The EINJ user interface for CXL error types is at +<debugfs mount point>/cxl. The following files belong to it: + +- einj_types: + + Provides the same functionality as available_error_types above, but + for CXL error types + +- $dport_dev/einj_inject: + + Injects a CXL error type into the CXL port represented by $dport_dev, + where $dport_dev is the name of the CXL port (usually a PCIe device name). + Error injections targeting a CXL 2.0+ port can use the legacy interface + under <debugfs mount point>/apei/einj, while CXL 1.1/1.0 port injections + must use this file. + + BIOS versions based on the ACPI 4.0 specification have limited options in controlling where the errors are injected. Your BIOS may support an extension (enabled with the param_extension=1 module parameter, or boot @@ -181,6 +203,18 @@ You should see something like this in dmesg:: [22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0 [22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0) +A CXL error injection example with $dport_dev=0000:e0:01.1:: + + # cd /sys/kernel/debug/cxl/ + # ls + 0000:e0:01.1 0000:0c:00.0 + # cat einj_types # See which errors can be injected + 0x00008000 CXL.mem Protocol Correctable + 0x00010000 CXL.mem Protocol Uncorrectable non-fatal + 0x00020000 CXL.mem Protocol Uncorrectable fatal + # cd 0000:e0:01.1 # Navigate to dport to inject into + # echo 0x8000 > einj_inject # Inject error + Special notes for injection into SGX enclaves: There may be a separate BIOS setup option to enable SGX injection. |