diff options
Diffstat (limited to 'Documentation')
545 files changed, 22863 insertions, 4911 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio index b8b0fd341c1797..da1345d854b4ad 100644 --- a/Documentation/ABI/obsolete/sysfs-gpio +++ b/Documentation/ABI/obsolete/sysfs-gpio @@ -28,5 +28,5 @@ Description: /label ... (r/o) descriptive, not necessarily unique /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1) - This ABI is deprecated and will be removed after 2020. It is - replaced with the GPIO character device. + This ABI is obsoleted by Documentation/ABI/testing/gpio-cdev and will be + removed after 2020. diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ffs b/Documentation/ABI/testing/configfs-usb-gadget-ffs index e39b27653c65c1..bf8936ff6d38c3 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-ffs +++ b/Documentation/ABI/testing/configfs-usb-gadget-ffs @@ -4,6 +4,14 @@ KernelVersion: 3.13 Description: The purpose of this directory is to create and remove it. A corresponding USB function instance is created/removed. - There are no attributes here. - All parameters are set through FunctionFS. + All attributes are read only: + + ============= ============================================ + ready 1 if the function is ready to be used, E.G. + if userspace has written descriptors and + strings to ep0, so the gadget can be + enabled - 0 otherwise. + ============= ============================================ + + All other parameters are set through FunctionFS. diff --git a/Documentation/ABI/testing/debugfs-cxl b/Documentation/ABI/testing/debugfs-cxl index fe61d372e3fac9..c61f9b8139730c 100644 --- a/Documentation/ABI/testing/debugfs-cxl +++ b/Documentation/ABI/testing/debugfs-cxl @@ -33,3 +33,37 @@ Description: device cannot clear poison from the address, -ENXIO is returned. The clear_poison attribute is only visible for devices supporting the capability. + +What: /sys/kernel/debug/cxl/einj_types +Date: January, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) Prints the CXL protocol error types made available by + the platform in the format: + + 0x<error number> <error type> + + The possible error types are (as of ACPI v6.5): + + 0x1000 CXL.cache Protocol Correctable + 0x2000 CXL.cache Protocol Uncorrectable non-fatal + 0x4000 CXL.cache Protocol Uncorrectable fatal + 0x8000 CXL.mem Protocol Correctable + 0x10000 CXL.mem Protocol Uncorrectable non-fatal + 0x20000 CXL.mem Protocol Uncorrectable fatal + + The <error number> can be written to einj_inject to inject + <error type> into a chosen dport. + +What: /sys/kernel/debug/cxl/$dport_dev/einj_inject +Date: January, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (WO) Writing an integer to this file injects the corresponding + CXL protocol error into $dport_dev ($dport_dev will be a device + name from /sys/bus/pci/devices). The integer to type mapping for + injection can be found by reading from einj_types. If the dport + was enumerated in RCH mode, a CXL 1.1 error is injected, otherwise + a CXL 2.0 error is injected. diff --git a/Documentation/ABI/testing/debugfs-driver-qat b/Documentation/ABI/testing/debugfs-driver-qat index b2db010d851eeb..bd6793760f2984 100644 --- a/Documentation/ABI/testing/debugfs-driver-qat +++ b/Documentation/ABI/testing/debugfs-driver-qat @@ -81,3 +81,29 @@ Description: (RO) Read returns, for each Acceleration Engine (AE), the number <N>: Number of Compress and Verify (CnV) errors and type of the last CnV error detected by Acceleration Engine N. + +What: /sys/kernel/debug/qat_<device>_<BDF>/heartbeat/inject_error +Date: March 2024 +KernelVersion: 6.8 +Contact: qat-linux@intel.com +Description: (WO) Write to inject an error that simulates an heartbeat + failure. This is to be used for testing purposes. + + After writing this file, the driver stops arbitration on a + random engine and disables the fetching of heartbeat counters. + If a workload is running on the device, a job submitted to the + accelerator might not get a response and a read of the + `heartbeat/status` attribute might report -1, i.e. device + unresponsive. + The error is unrecoverable thus the device must be restarted to + restore its functionality. + + This attribute is available only when the kernel is built with + CONFIG_CRYPTO_DEV_QAT_ERROR_INJECTION=y. + + A write of 1 enables error injection. + + The following example shows how to enable error injection:: + + # cd /sys/kernel/debug/qat_<device>_<BDF> + # echo 1 > heartbeat/inject_error diff --git a/Documentation/ABI/testing/debugfs-hisi-hpre b/Documentation/ABI/testing/debugfs-hisi-hpre index 8e8de49c5cc669..d4e16ef9ac9a99 100644 --- a/Documentation/ABI/testing/debugfs-hisi-hpre +++ b/Documentation/ABI/testing/debugfs-hisi-hpre @@ -111,6 +111,28 @@ Description: QM debug registers(regs) read hardware register value. This node is used to show the change of the qm register values. This node can be help users to check the change of register values. +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/qm_state +Date: Jan 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the state of the device. + 0: busy, 1: idle. + Only available for PF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_timeout +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Set the wait time when stop queue fails. Available for both PF + and VF, and take no other effect on HPRE. + 0: not wait(default), others value: wait dev_timeout * 20 microsecond. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_state +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the stop queue status of the QM. The default value is 0, + if dev_timeout is set, when stop queue fails, the dev_state + will return non-zero value. Available for both PF and VF, + and take no other effect on HPRE. + What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/diff_regs Date: Mar 2022 Contact: linux-crypto@vger.kernel.org diff --git a/Documentation/ABI/testing/debugfs-hisi-sec b/Documentation/ABI/testing/debugfs-hisi-sec index deeefe2c735ed7..6c6c9a6e150acb 100644 --- a/Documentation/ABI/testing/debugfs-hisi-sec +++ b/Documentation/ABI/testing/debugfs-hisi-sec @@ -91,6 +91,28 @@ Description: QM debug registers(regs) read hardware register value. This node is used to show the change of the qm register values. This node can be help users to check the change of register values. +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_state +Date: Jan 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the state of the device. + 0: busy, 1: idle. + Only available for PF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/dev_timeout +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Set the wait time when stop queue fails. Available for both PF + and VF, and take no other effect on SEC. + 0: not wait(default), others value: wait dev_timeout * 20 microsecond. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/dev_state +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the stop queue status of the QM. The default value is 0, + if dev_timeout is set, when stop queue fails, the dev_state + will return non-zero value. Available for both PF and VF, + and take no other effect on SEC. + What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/diff_regs Date: Mar 2022 Contact: linux-crypto@vger.kernel.org diff --git a/Documentation/ABI/testing/debugfs-hisi-zip b/Documentation/ABI/testing/debugfs-hisi-zip index 593714afaed249..a22dd694221935 100644 --- a/Documentation/ABI/testing/debugfs-hisi-zip +++ b/Documentation/ABI/testing/debugfs-hisi-zip @@ -104,6 +104,28 @@ Description: QM debug registers(regs) read hardware register value. This node is used to show the change of the qm registers value. This node can be help users to check the change of register values. +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/qm_state +Date: Jan 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the state of the device. + 0: busy, 1: idle. + Only available for PF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/dev_timeout +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Set the wait time when stop queue fails. Available for both PF + and VF, and take no other effect on ZIP. + 0: not wait(default), others value: wait dev_timeout * 20 microsecond. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/dev_state +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the stop queue status of the QM. The default value is 0, + if dev_timeout is set, when stop queue fails, the dev_state + will return non-zero value. Available for both PF and VF, + and take no other effect on ZIP. + What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/diff_regs Date: Mar 2022 Contact: linux-crypto@vger.kernel.org diff --git a/Documentation/ABI/testing/debugfs-intel-iommu b/Documentation/ABI/testing/debugfs-intel-iommu new file mode 100644 index 00000000000000..2ab8464504a99a --- /dev/null +++ b/Documentation/ABI/testing/debugfs-intel-iommu @@ -0,0 +1,276 @@ +What: /sys/kernel/debug/iommu/intel/iommu_regset +Date: December 2023 +Contact: Jingqi Liu <Jingqi.liu@intel.com> +Description: + This file dumps all the register contents for each IOMMU device. + + Example in Kabylake: + + :: + + $ sudo cat /sys/kernel/debug/iommu/intel/iommu_regset + + IOMMU: dmar0 Register Base Address: 26be37000 + + Name Offset Contents + VER 0x00 0x0000000000000010 + GCMD 0x18 0x0000000000000000 + GSTS 0x1c 0x00000000c7000000 + FSTS 0x34 0x0000000000000000 + FECTL 0x38 0x0000000000000000 + + [...] + + IOMMU: dmar1 Register Base Address: fed90000 + + Name Offset Contents + VER 0x00 0x0000000000000010 + GCMD 0x18 0x0000000000000000 + GSTS 0x1c 0x00000000c7000000 + FSTS 0x34 0x0000000000000000 + FECTL 0x38 0x0000000000000000 + + [...] + + IOMMU: dmar2 Register Base Address: fed91000 + + Name Offset Contents + VER 0x00 0x0000000000000010 + GCMD 0x18 0x0000000000000000 + GSTS 0x1c 0x00000000c7000000 + FSTS 0x34 0x0000000000000000 + FECTL 0x38 0x0000000000000000 + + [...] + +What: /sys/kernel/debug/iommu/intel/ir_translation_struct +Date: December 2023 +Contact: Jingqi Liu <Jingqi.liu@intel.com> +Description: + This file dumps the table entries for Interrupt + remapping and Interrupt posting. + + Example in Kabylake: + + :: + + $ sudo cat /sys/kernel/debug/iommu/intel/ir_translation_struct + + Remapped Interrupt supported on IOMMU: dmar0 + IR table address:100900000 + + Entry SrcID DstID Vct IRTE_high IRTE_low + 0 00:0a.0 00000080 24 0000000000040050 000000800024000d + 1 00:0a.0 00000001 ef 0000000000040050 0000000100ef000d + + Remapped Interrupt supported on IOMMU: dmar1 + IR table address:100300000 + Entry SrcID DstID Vct IRTE_high IRTE_low + 0 00:02.0 00000002 26 0000000000040010 000000020026000d + + [...] + + **** + + Posted Interrupt supported on IOMMU: dmar0 + IR table address:100900000 + Entry SrcID PDA_high PDA_low Vct IRTE_high IRTE_low + +What: /sys/kernel/debug/iommu/intel/dmar_translation_struct +Date: December 2023 +Contact: Jingqi Liu <Jingqi.liu@intel.com> +Description: + This file dumps Intel IOMMU DMA remapping tables, such + as root table, context table, PASID directory and PASID + table entries in debugfs. For legacy mode, it doesn't + support PASID, and hence PASID field is defaulted to + '-1' and other PASID related fields are invalid. + + Example in Kabylake: + + :: + + $ sudo cat /sys/kernel/debug/iommu/intel/dmar_translation_struct + + IOMMU dmar1: Root Table Address: 0x103027000 + B.D.F Root_entry + 00:02.0 0x0000000000000000:0x000000010303e001 + + Context_entry + 0x0000000000000102:0x000000010303f005 + + PASID PASID_table_entry + -1 0x0000000000000000:0x0000000000000000:0x0000000000000000 + + IOMMU dmar0: Root Table Address: 0x103028000 + B.D.F Root_entry + 00:0a.0 0x0000000000000000:0x00000001038a7001 + + Context_entry + 0x0000000000000000:0x0000000103220e7d + + PASID PASID_table_entry + 0 0x0000000000000000:0x0000000000800002:0x00000001038a5089 + + [...] + +What: /sys/kernel/debug/iommu/intel/invalidation_queue +Date: December 2023 +Contact: Jingqi Liu <Jingqi.liu@intel.com> +Description: + This file exports invalidation queue internals of each + IOMMU device. + + Example in Kabylake: + + :: + + $ sudo cat /sys/kernel/debug/iommu/intel/invalidation_queue + + Invalidation queue on IOMMU: dmar0 + Base: 0x10022e000 Head: 20 Tail: 20 + Index qw0 qw1 qw2 + 0 0000000000000014 0000000000000000 0000000000000000 + 1 0000000200000025 0000000100059c04 0000000000000000 + 2 0000000000000014 0000000000000000 0000000000000000 + + qw3 status + 0000000000000000 0000000000000000 + 0000000000000000 0000000000000000 + 0000000000000000 0000000000000000 + + [...] + + Invalidation queue on IOMMU: dmar1 + Base: 0x10026e000 Head: 32 Tail: 32 + Index qw0 qw1 status + 0 0000000000000004 0000000000000000 0000000000000000 + 1 0000000200000025 0000000100059804 0000000000000000 + 2 0000000000000011 0000000000000000 0000000000000000 + + [...] + +What: /sys/kernel/debug/iommu/intel/dmar_perf_latency +Date: December 2023 +Contact: Jingqi Liu <Jingqi.liu@intel.com> +Description: + This file is used to control and show counts of + execution time ranges for various types per DMAR. + + Firstly, write a value to + /sys/kernel/debug/iommu/intel/dmar_perf_latency + to enable sampling. + + The possible values are as follows: + + * 0 - disable sampling all latency data + + * 1 - enable sampling IOTLB invalidation latency data + + * 2 - enable sampling devTLB invalidation latency data + + * 3 - enable sampling intr entry cache invalidation latency data + + Next, read /sys/kernel/debug/iommu/intel/dmar_perf_latency gives + a snapshot of sampling result of all enabled monitors. + + Examples in Kabylake: + + :: + + 1) Disable sampling all latency data: + + $ sudo echo 0 > /sys/kernel/debug/iommu/intel/dmar_perf_latency + + 2) Enable sampling IOTLB invalidation latency data + + $ sudo echo 1 > /sys/kernel/debug/iommu/intel/dmar_perf_latency + + $ sudo cat /sys/kernel/debug/iommu/intel/dmar_perf_latency + + IOMMU: dmar0 Register Base Address: 26be37000 + <0.1us 0.1us-1us 1us-10us 10us-100us 100us-1ms + inv_iotlb 0 0 0 0 0 + + 1ms-10ms >=10ms min(us) max(us) average(us) + inv_iotlb 0 0 0 0 0 + + [...] + + IOMMU: dmar2 Register Base Address: fed91000 + <0.1us 0.1us-1us 1us-10us 10us-100us 100us-1ms + inv_iotlb 0 0 18 0 0 + + 1ms-10ms >=10ms min(us) max(us) average(us) + inv_iotlb 0 0 2 2 2 + + 3) Enable sampling devTLB invalidation latency data + + $ sudo echo 2 > /sys/kernel/debug/iommu/intel/dmar_perf_latency + + $ sudo cat /sys/kernel/debug/iommu/intel/dmar_perf_latency + + IOMMU: dmar0 Register Base Address: 26be37000 + <0.1us 0.1us-1us 1us-10us 10us-100us 100us-1ms + inv_devtlb 0 0 0 0 0 + + >=10ms min(us) max(us) average(us) + inv_devtlb 0 0 0 0 + + [...] + +What: /sys/kernel/debug/iommu/intel/<bdf>/domain_translation_struct +Date: December 2023 +Contact: Jingqi Liu <Jingqi.liu@intel.com> +Description: + This file dumps a specified page table of Intel IOMMU + in legacy mode or scalable mode. + + For a device that only supports legacy mode, dump its + page table by the debugfs file in the debugfs device + directory. e.g. + /sys/kernel/debug/iommu/intel/0000:00:02.0/domain_translation_struct. + + For a device that supports scalable mode, dump the + page table of specified pasid by the debugfs file in + the debugfs pasid directory. e.g. + /sys/kernel/debug/iommu/intel/0000:00:02.0/1/domain_translation_struct. + + Examples in Kabylake: + + :: + + 1) Dump the page table of device "0000:00:02.0" that only supports legacy mode. + + $ sudo cat /sys/kernel/debug/iommu/intel/0000:00:02.0/domain_translation_struct + + Device 0000:00:02.0 @0x1017f8000 + IOVA_PFN PML5E PML4E + 0x000000008d800 | 0x0000000000000000 0x00000001017f9003 + 0x000000008d801 | 0x0000000000000000 0x00000001017f9003 + 0x000000008d802 | 0x0000000000000000 0x00000001017f9003 + + PDPE PDE PTE + 0x00000001017fa003 0x00000001017fb003 0x000000008d800003 + 0x00000001017fa003 0x00000001017fb003 0x000000008d801003 + 0x00000001017fa003 0x00000001017fb003 0x000000008d802003 + + [...] + + 2) Dump the page table of device "0000:00:0a.0" with PASID "1" that + supports scalable mode. + + $ sudo cat /sys/kernel/debug/iommu/intel/0000:00:0a.0/1/domain_translation_struct + + Device 0000:00:0a.0 with pasid 1 @0x10c112000 + IOVA_PFN PML5E PML4E + 0x0000000000000 | 0x0000000000000000 0x000000010df93003 + 0x0000000000001 | 0x0000000000000000 0x000000010df93003 + 0x0000000000002 | 0x0000000000000000 0x000000010df93003 + + PDPE PDE PTE + 0x0000000106ae6003 0x0000000104b38003 0x0000000147c00803 + 0x0000000106ae6003 0x0000000104b38003 0x0000000147c01803 + 0x0000000106ae6003 0x0000000104b38003 0x0000000147c02803 + + [...] diff --git a/Documentation/ABI/testing/gpio-cdev b/Documentation/ABI/testing/gpio-cdev index 66bdcd188b6c98..c9689b2a6fed21 100644 --- a/Documentation/ABI/testing/gpio-cdev +++ b/Documentation/ABI/testing/gpio-cdev @@ -6,8 +6,9 @@ Description: The character device files /dev/gpiochip* are the interface between GPIO chips and userspace. - The ioctl(2)-based ABI is defined and documented in - [include/uapi]<linux/gpio.h>. + The ioctl(2)-based ABI is defined in + [include/uapi]<linux/gpio.h> and documented in + Documentation/userspace-api/gpio/chardev.rst. The following file operations are supported: @@ -17,8 +18,8 @@ Description: ioctl(2) Initiate various actions. - See the inline documentation in [include/uapi]<linux/gpio.h> - for descriptions of all ioctls. + See Documentation/userspace-api/gpio/chardev.rst + for a description of all ioctls. close(2) Stops and free up the I/O contexts that was associated diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm index 4dd49b159543b6..b4d0fc8d319df7 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm @@ -170,3 +170,90 @@ Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_t Description: (RW) Set/Get the MSR(mux select register) for the DSB subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_mode +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: (Write) Set the data collection mode of CMB tpdm. Continuous + change creates CMB data set elements on every CMBCLK edge. + Trace-on-change creates CMB data set elements only when a new + data set element differs in value from the previous element + in a CMB data set. + + Accepts only one of the 2 values - 0 or 1. + 0 : Continuous CMB collection mode. + 1 : Trace-on-change CMB collection mode. + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_trig_patt/xpr[0:1] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the value of the trigger pattern for the CMB + subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_trig_patt/xpmr[0:1] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the mask of the trigger pattern for the CMB + subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_patt/tpr[0:1] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the value of the pattern for the CMB subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_patt/tpmr[0:1] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the mask of the pattern for the CMB subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_patt/enable_ts +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (Write) Set the pattern timestamp of CMB tpdm. Read + the pattern timestamp of CMB tpdm. + + Accepts only one of the 2 values - 0 or 1. + 0 : Disable CMB pattern timestamp. + 1 : Enable CMB pattern timestamp. + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_trig_ts +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the trigger timestamp of the CMB for tpdm. + + Accepts only one of the 2 values - 0 or 1. + 0 : Set the CMB trigger type to false + 1 : Set the CMB trigger type to true + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_ts_all +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Read or write the status of timestamp upon all interface. + Only value 0 and 1 can be written to this node. Set this node to 1 to requeset + timestamp to all trace packet. + Accepts only one of the 2 values - 0 or 1. + 0 : Disable the timestamp of all trace packets. + 1 : Enable the timestamp of all trace packets. + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_msr/msr[0:31] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the MSR(mux select register) for the CMB subunit + TPDM. diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index fff2581b803358..3f5627a1210a16 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -552,3 +552,37 @@ Description: attribute is only visible for devices supporting the capability. The retrieved errors are logged as kernel events when cxl_poison event tracing is enabled. + + +What: /sys/bus/cxl/devices/regionZ/accessY/read_bandwidth + /sys/bus/cxl/devices/regionZ/accessY/write_banwidth +Date: Jan, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) The aggregated read or write bandwidth of the region. The + number is the accumulated read or write bandwidth of all CXL memory + devices that contributes to the region in MB/s. It is + identical data that should appear in + /sys/devices/system/node/nodeX/accessY/initiators/read_bandwidth or + /sys/devices/system/node/nodeX/accessY/initiators/write_bandwidth. + See Documentation/ABI/stable/sysfs-devices-node. access0 provides + the number to the closest initiator and access1 provides the + number to the closest CPU. + + +What: /sys/bus/cxl/devices/regionZ/accessY/read_latency + /sys/bus/cxl/devices/regionZ/accessY/write_latency +Date: Jan, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) The read or write latency of the region. The number is + the worst read or write latency of all CXL memory devices that + contributes to the region in nanoseconds. It is identical data + that should appear in + /sys/devices/system/node/nodeX/accessY/initiators/read_latency or + /sys/devices/system/node/nodeX/accessY/initiators/write_latency. + See Documentation/ABI/stable/sysfs-devices-node. access0 provides + the number to the closest initiator and access1 provides the + number to the closest CPU. diff --git a/Documentation/ABI/testing/sysfs-bus-dax b/Documentation/ABI/testing/sysfs-bus-dax new file mode 100644 index 00000000000000..b34266bfae49ae --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-dax @@ -0,0 +1,153 @@ +What: /sys/bus/dax/devices/daxX.Y/align +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RW) Provides a way to specify an alignment for a dax device. + Values allowed are constrained by the physical address ranges + that back the dax device, and also by arch requirements. + +What: /sys/bus/dax/devices/daxX.Y/mapping +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (WO) Provides a way to allocate a mapping range under a dax + device. Specified in the format <start>-<end>. + +What: /sys/bus/dax/devices/daxX.Y/mapping[0..N]/start +What: /sys/bus/dax/devices/daxX.Y/mapping[0..N]/end +What: /sys/bus/dax/devices/daxX.Y/mapping[0..N]/page_offset +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RO) A dax device may have multiple constituent discontiguous + address ranges. These are represented by the different + 'mappingX' subdirectories. The 'start' attribute indicates the + start physical address for the given range. The 'end' attribute + indicates the end physical address for the given range. The + 'page_offset' attribute indicates the offset of the current + range in the dax device. + +What: /sys/bus/dax/devices/daxX.Y/resource +Date: June, 2019 +KernelVersion: v5.3 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The resource attribute indicates the starting physical + address of a dax device. In case of a device with multiple + constituent ranges, it indicates the starting address of the + first range. + +What: /sys/bus/dax/devices/daxX.Y/size +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RW) The size attribute indicates the total size of a dax + device. For creating subdivided dax devices, or for resizing + an existing device, the new size can be written to this as + part of the reconfiguration process. + +What: /sys/bus/dax/devices/daxX.Y/numa_node +Date: November, 2019 +KernelVersion: v5.5 +Contact: nvdimm@lists.linux.dev +Description: + (RO) If NUMA is enabled and the platform has affinitized the + backing device for this dax device, emit the CPU node + affinity for this device. + +What: /sys/bus/dax/devices/daxX.Y/target_node +Date: February, 2019 +KernelVersion: v5.1 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The target-node attribute is the Linux numa-node that a + device-dax instance may create when it is online. Prior to + being online the device's 'numa_node' property reflects the + closest online cpu node which is the typical expectation of a + device 'numa_node'. Once it is online it becomes its own + distinct numa node. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/available_size +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The available_size attribute tracks available dax region + capacity. This only applies to volatile hmem devices, not pmem + devices, since pmem devices are defined by nvdimm namespace + boundaries. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/size +Date: July, 2017 +KernelVersion: v5.1 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The size attribute indicates the size of a given dax region + in bytes. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/align +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The align attribute indicates alignment of the dax region. + Changes on align may not always be valid, when say certain + mappings were created with 2M and then we switch to 1G. This + validates all ranges against the new value being attempted, post + resizing. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/seed +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The seed device is a concept for dynamic dax regions to be + able to split the region amongst multiple sub-instances. The + seed device, similar to libnvdimm seed devices, is a device + that starts with zero capacity allocated and unbound to a + driver. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/create +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RW) The create interface to the dax region provides a way to + create a new unconfigured dax device under the given region, which + can then be configured (with a size etc.) and then probed. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/delete +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (WO) The delete interface for a dax region provides for deletion + of any 0-sized and idle dax devices. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/id +Date: July, 2017 +KernelVersion: v5.1 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The id attribute indicates the region id of a dax region. + +What: /sys/bus/dax/devices/daxX.Y/memmap_on_memory +Date: January, 2024 +KernelVersion: v6.8 +Contact: nvdimm@lists.linux.dev +Description: + (RW) Control the memmap_on_memory setting if the dax device + were to be hotplugged as system memory. This determines whether + the 'altmap' for the hotplugged memory will be placed on the + device being hotplugged (memmap_on_memory=1) or if it will be + placed on regular memory (memmap_on_memory=0). This attribute + must be set before the device is handed over to the 'kmem' + driver (i.e. hotplugged into system-ram). Additionally, this + depends on CONFIG_MHP_MEMMAP_ON_MEMORY, and a globally enabled + memmap_on_memory parameter for memory_hotplug. This is + typically set on the kernel command line - + memory_hotplug.memmap_on_memory set to 'true' or 'force'." diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934 b/Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934 new file mode 100644 index 00000000000000..625b7f8678478d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934 @@ -0,0 +1,9 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_shunt_resistorY +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + The value of the shunt resistor may be known only at runtime + and set by a client application. This attribute allows to + set its value in micro-ohms. X is the IIO index of the device. + Y is the channel number. The value is used to calculate + current, power and accumulated energy. diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats index 860db53037a58f..d1f67bb81d5d14 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats @@ -11,7 +11,7 @@ saw any problems). What: /sys/bus/pci/devices/<dev>/aer_dev_correctable Date: July 2018 -KernelVersion: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: List of correctable errors seen and reported by this PCI device using ERR_COR. Note that since multiple errors may @@ -32,7 +32,7 @@ Description: List of correctable errors seen and reported by this What: /sys/bus/pci/devices/<dev>/aer_dev_fatal Date: July 2018 -KernelVersion: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: List of uncorrectable fatal errors seen and reported by this PCI device using ERR_FATAL. Note that since multiple errors may @@ -62,7 +62,7 @@ Description: List of uncorrectable fatal errors seen and reported by this What: /sys/bus/pci/devices/<dev>/aer_dev_nonfatal Date: July 2018 -KernelVersion: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: List of uncorrectable nonfatal errors seen and reported by this PCI device using ERR_NONFATAL. Note that since multiple errors @@ -100,20 +100,20 @@ collectors) that are AER capable. These indicate the number of error messages as device, so these counters include them and are thus cumulative of all the error messages on the PCI hierarchy originating at that root port. -What: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor +What: /sys/bus/pci/devices/<dev>/aer_rootport_total_err_cor Date: July 2018 -KernelVersion: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: Total number of ERR_COR messages reported to rootport. -What: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal +What: /sys/bus/pci/devices/<dev>/aer_rootport_total_err_fatal Date: July 2018 -KernelVersion: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: Total number of ERR_FATAL messages reported to rootport. -What: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal +What: /sys/bus/pci/devices/<dev>/aer_rootport_total_err_nonfatal Date: July 2018 -KernelVersion: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: Total number of ERR_NONFATAL messages reported to rootport. diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-avs b/Documentation/ABI/testing/sysfs-bus-pci-devices-avs new file mode 100644 index 00000000000000..ebff3fa12055db --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-avs @@ -0,0 +1,8 @@ +What: /sys/devices/pci0000:00/<dev>/avs/fw_version +Date: February 2024 +Contact: Cezary Rojewski <cezary.rojewski@intel.com> +Description: + Version of AudioDSP firmware ASoC avs driver is communicating + with. + + Format: %d.%d.%d.%d, type:major:minor:build. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 2b7108e2197756..af9b653422f169 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -442,6 +442,16 @@ What: /sys/bus/usb/devices/usbX/descriptors Description: Contains the interface descriptors, in binary. +What: /sys/bus/usb/devices/usbX/bos_descriptors +Date: March 2024 +Contact: Elbert Mai <code@elbertmai.com> +Description: + Binary file containing the cached binary device object store (BOS) + of the device. This consists of the BOS descriptor followed by the + set of device capability descriptors. All descriptors read from + this file are in bus-endian format. Note that the kernel will not + request the BOS from a device if its bcdUSB is less than 0x0201. + What: /sys/bus/usb/devices/usbX/idProduct Description: Product ID, in hexadecimal. diff --git a/Documentation/ABI/testing/sysfs-class-hwmon b/Documentation/ABI/testing/sysfs-class-hwmon index 3dac923c9b0ef0..cfd0d0bab48398 100644 --- a/Documentation/ABI/testing/sysfs-class-hwmon +++ b/Documentation/ABI/testing/sysfs-class-hwmon @@ -149,6 +149,15 @@ Description: RW +What: /sys/class/hwmon/hwmonX/inY_fault +Description: + Reports a voltage hard failure (eg: shorted component) + + - 1: Failed + - 0: Ok + + RO + What: /sys/class/hwmon/hwmonX/cpuY_vid Description: CPU core reference voltage. @@ -968,6 +977,15 @@ Description: RW +What: /sys/class/hwmon/hwmonX/humidityY_max_alarm +Description: + Maximum humidity detection + + - 0: OK + - 1: Maximum humidity detected + + RO + What: /sys/class/hwmon/hwmonX/humidityY_max_hyst Description: Humidity hysteresis value for max limit. @@ -987,6 +1005,15 @@ Description: RW +What: /sys/class/hwmon/hwmonX/humidityY_min_alarm +Description: + Minimum humidity detection + + - 0: OK + - 1: Minimum humidity detected + + RO + What: /sys/class/hwmon/hwmonX/humidityY_min_hyst Description: Humidity hysteresis value for min limit. diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev index a6c307c4befa09..ed46b37ab8a284 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -88,6 +88,8 @@ Description: speed of 10MBps of the named network device. Setting this value also immediately changes the LED state. + Present only if the named network device supports 10Mbps link speed. + What: /sys/class/leds/<led>/link_100 Date: Jun 2023 KernelVersion: 6.5 @@ -101,6 +103,8 @@ Description: speed of 100Mbps of the named network device. Setting this value also immediately changes the LED state. + Present only if the named network device supports 100Mbps link speed. + What: /sys/class/leds/<led>/link_1000 Date: Jun 2023 KernelVersion: 6.5 @@ -114,6 +118,8 @@ Description: speed of 1000Mbps of the named network device. Setting this value also immediately changes the LED state. + Present only if the named network device supports 1000Mbps link speed. + What: /sys/class/leds/<led>/link_2500 Date: Nov 2023 KernelVersion: 6.8 @@ -127,6 +133,8 @@ Description: speed of 2500Mbps of the named network device. Setting this value also immediately changes the LED state. + Present only if the named network device supports 2500Mbps link speed. + What: /sys/class/leds/<led>/link_5000 Date: Nov 2023 KernelVersion: 6.8 @@ -140,6 +148,8 @@ Description: speed of 5000Mbps of the named network device. Setting this value also immediately changes the LED state. + Present only if the named network device supports 5000Mbps link speed. + What: /sys/class/leds/<led>/link_10000 Date: Nov 2023 KernelVersion: 6.8 @@ -153,6 +163,8 @@ Description: speed of 10000Mbps of the named network device. Setting this value also immediately changes the LED state. + Present only if the named network device supports 10000Mbps link speed. + What: /sys/class/leds/<led>/half_duplex Date: Jun 2023 KernelVersion: 6.5 diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-tty b/Documentation/ABI/testing/sysfs-class-led-trigger-tty index 30cef9ac0f493a..308fbc3627cd1a 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-tty +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-tty @@ -1,11 +1,11 @@ -What: /sys/class/leds/<led>/ttyname +What: /sys/class/leds/<tty_led>/ttyname Date: Dec 2020 KernelVersion: 5.10 Contact: linux-leds@vger.kernel.org Description: Specifies the tty device name of the triggering tty -What: /sys/class/leds/<led>/rx +What: /sys/class/leds/<tty_led>/rx Date: February 2024 KernelVersion: 6.8 Description: @@ -13,7 +13,7 @@ Description: If set to 0, the LED will not blink on reception. If set to 1 (default), the LED will blink on reception. -What: /sys/class/leds/<led>/tx +What: /sys/class/leds/<tty_led>/tx Date: February 2024 KernelVersion: 6.8 Description: @@ -21,7 +21,7 @@ Description: If set to 0, the LED will not blink on transmission. If set to 1 (default), the LED will blink on transmission. -What: /sys/class/leds/<led>/cts +What: /sys/class/leds/<tty_led>/cts Date: February 2024 KernelVersion: 6.8 Description: @@ -31,7 +31,7 @@ Description: If set to 0 (default), the LED will not evaluate CTS. If set to 1, the LED will evaluate CTS. -What: /sys/class/leds/<led>/dsr +What: /sys/class/leds/<tty_led>/dsr Date: February 2024 KernelVersion: 6.8 Description: @@ -41,7 +41,7 @@ Description: If set to 0 (default), the LED will not evaluate DSR. If set to 1, the LED will evaluate DSR. -What: /sys/class/leds/<led>/dcd +What: /sys/class/leds/<tty_led>/dcd Date: February 2024 KernelVersion: 6.8 Description: @@ -51,7 +51,7 @@ Description: If set to 0 (default), the LED will not evaluate CAR (DCD). If set to 1, the LED will evaluate CAR (DCD). -What: /sys/class/leds/<led>/rng +What: /sys/class/leds/<tty_led>/rng Date: February 2024 KernelVersion: 6.8 Description: diff --git a/Documentation/ABI/testing/sysfs-class-usb_role b/Documentation/ABI/testing/sysfs-class-usb_role index 3b810a425a52c8..9fab3f06679e29 100644 --- a/Documentation/ABI/testing/sysfs-class-usb_role +++ b/Documentation/ABI/testing/sysfs-class-usb_role @@ -19,3 +19,9 @@ Description: - none - host - device + +What: /sys/class/usb_role/<switch>/connector +Date: Feb 2024 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Optional symlink to the USB Type-C connector. diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat index bbf329cf0d67bc..96020fb051c347 100644 --- a/Documentation/ABI/testing/sysfs-driver-qat +++ b/Documentation/ABI/testing/sysfs-driver-qat @@ -141,3 +141,23 @@ Description: 64 This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat/auto_reset +Date: March 2024 +KernelVersion: 6.8 +Contact: qat-linux@intel.com +Description: (RW) Reports the current state of the autoreset feature + for a QAT device + + Write to the attribute to enable or disable device auto reset. + + Device auto reset is disabled by default. + + The values are: + + * 1/Yy/on: auto reset enabled. If the device encounters an + unrecoverable error, it will be reset automatically. + * 0/Nn/off: auto reset disabled. If the device encounters an + unrecoverable error, it will not be reset. + + This attribute is only available for qat_4xxx devices. diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 99fa87a43926e6..1a4d83953379ec 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -205,7 +205,7 @@ Description: Controls the idle timing of system, if there is no FS operation What: /sys/fs/f2fs/<disk>/discard_idle_interval Date: September 2018 Contact: "Chao Yu" <yuchao0@huawei.com> -Contact: "Sahitya Tummala" <stummala@codeaurora.org> +Contact: "Sahitya Tummala" <quic_stummala@quicinc.com> Description: Controls the idle timing of discard thread given this time interval. Default is 5 secs. @@ -213,7 +213,7 @@ Description: Controls the idle timing of discard thread given What: /sys/fs/f2fs/<disk>/gc_idle_interval Date: September 2018 Contact: "Chao Yu" <yuchao0@huawei.com> -Contact: "Sahitya Tummala" <stummala@codeaurora.org> +Contact: "Sahitya Tummala" <quic_stummala@quicinc.com> Description: Controls the idle timing for gc path. Set to 5 seconds by default. What: /sys/fs/f2fs/<disk>/iostat_enable @@ -701,29 +701,31 @@ Description: Support configuring fault injection type, should be enabled with fault_injection option, fault type value is shown below, it supports single or combined type. - =================== =========== - Type_Name Type_Value - =================== =========== - FAULT_KMALLOC 0x000000001 - FAULT_KVMALLOC 0x000000002 - FAULT_PAGE_ALLOC 0x000000004 - FAULT_PAGE_GET 0x000000008 - FAULT_ALLOC_BIO 0x000000010 (obsolete) - FAULT_ALLOC_NID 0x000000020 - FAULT_ORPHAN 0x000000040 - FAULT_BLOCK 0x000000080 - FAULT_DIR_DEPTH 0x000000100 - FAULT_EVICT_INODE 0x000000200 - FAULT_TRUNCATE 0x000000400 - FAULT_READ_IO 0x000000800 - FAULT_CHECKPOINT 0x000001000 - FAULT_DISCARD 0x000002000 - FAULT_WRITE_IO 0x000004000 - FAULT_SLAB_ALLOC 0x000008000 - FAULT_DQUOT_INIT 0x000010000 - FAULT_LOCK_OP 0x000020000 - FAULT_BLKADDR 0x000040000 - =================== =========== + =========================== =========== + Type_Name Type_Value + =========================== =========== + FAULT_KMALLOC 0x000000001 + FAULT_KVMALLOC 0x000000002 + FAULT_PAGE_ALLOC 0x000000004 + FAULT_PAGE_GET 0x000000008 + FAULT_ALLOC_BIO 0x000000010 (obsolete) + FAULT_ALLOC_NID 0x000000020 + FAULT_ORPHAN 0x000000040 + FAULT_BLOCK 0x000000080 + FAULT_DIR_DEPTH 0x000000100 + FAULT_EVICT_INODE 0x000000200 + FAULT_TRUNCATE 0x000000400 + FAULT_READ_IO 0x000000800 + FAULT_CHECKPOINT 0x000001000 + FAULT_DISCARD 0x000002000 + FAULT_WRITE_IO 0x000004000 + FAULT_SLAB_ALLOC 0x000008000 + FAULT_DQUOT_INIT 0x000010000 + FAULT_LOCK_OP 0x000020000 + FAULT_BLKADDR_VALIDITY 0x000040000 + FAULT_BLKADDR_CONSISTENCE 0x000080000 + FAULT_NO_SEGMENT 0x000100000 + =========================== =========== What: /sys/fs/f2fs/<disk>/discard_io_aware_gran Date: January 2023 diff --git a/Documentation/ABI/testing/sysfs-fs-virtiofs b/Documentation/ABI/testing/sysfs-fs-virtiofs new file mode 100644 index 00000000000000..4839dbce997e42 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-fs-virtiofs @@ -0,0 +1,11 @@ +What: /sys/fs/virtiofs/<n>/tag +Date: Feb 2024 +Contact: virtio-fs@lists.linux.dev +Description: + [RO] The mount "tag" that can be used to mount this filesystem. + +What: /sys/fs/virtiofs/<n>/device +Date: Feb 2024 +Contact: virtio-fs@lists.linux.dev +Description: + Symlink to the virtio device that exports this filesystem. diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-cma b/Documentation/ABI/testing/sysfs-kernel-mm-cma index 02b2bb60c2969c..dfd755201142f1 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-cma +++ b/Documentation/ABI/testing/sysfs-kernel-mm-cma @@ -23,3 +23,9 @@ Date: Feb 2021 Contact: Minchan Kim <minchan@kernel.org> Description: the number of pages CMA API failed to allocate + +What: /sys/kernel/mm/cma/<cma-heap-name>/release_pages_success +Date: Feb 2024 +Contact: Anshuman Khandual <anshuman.khandual@arm.com> +Description: + the number of pages CMA API succeeded to release diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-damon b/Documentation/ABI/testing/sysfs-kernel-mm-damon index bfa5b8288d8d11..dad4d5ffd78656 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-damon +++ b/Documentation/ABI/testing/sysfs-kernel-mm-damon @@ -34,7 +34,9 @@ Description: Writing 'on' or 'off' to this file makes the kdamond starts or kdamond. Writing 'update_schemes_tried_bytes' to the file updates only '.../tried_regions/total_bytes' files of this kdamond. Writing 'clear_schemes_tried_regions' to the file - removes contents of the 'tried_regions' directory. + removes contents of the 'tried_regions' directory. Writing + 'update_schemes_effective_quotas' to the file updates + '.../quotas/effective_bytes' files of this kdamond. What: /sys/kernel/mm/damon/admin/kdamonds/<K>/pid Date: Mar 2022 @@ -208,6 +210,12 @@ Contact: SeongJae Park <sj@kernel.org> Description: Writing to and reading from this file sets and gets the size quota of the scheme in bytes. +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/effective_bytes +Date: Feb 2024 +Contact: SeongJae Park <sj@kernel.org> +Description: Reading from this file gets the effective size quota of the + scheme in bytes, which adjusted for the time quota and goals. + What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/reset_interval_ms Date: Mar 2022 Contact: SeongJae Park <sj@kernel.org> @@ -221,6 +229,12 @@ Description: Writing a number 'N' to this file creates the number of directories for setting automatic tuning of the scheme's aggressiveness named '0' to 'N-1' under the goals/ directory. +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/<G>/target_metric +Date: Feb 2024 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the quota + auto-tuning goal metric. + What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/<G>/target_value Date: Nov 2023 Contact: SeongJae Park <sj@kernel.org> diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy b/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy new file mode 100644 index 00000000000000..8ac327fd7fb6e3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy @@ -0,0 +1,4 @@ +What: /sys/kernel/mm/mempolicy/ +Date: January 2024 +Contact: Linux memory management mailing list <linux-mm@kvack.org> +Description: Interface for Mempolicy diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave b/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave new file mode 100644 index 00000000000000..0b7972de04e939 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave @@ -0,0 +1,25 @@ +What: /sys/kernel/mm/mempolicy/weighted_interleave/ +Date: January 2024 +Contact: Linux memory management mailing list <linux-mm@kvack.org> +Description: Configuration Interface for the Weighted Interleave policy + +What: /sys/kernel/mm/mempolicy/weighted_interleave/nodeN +Date: January 2024 +Contact: Linux memory management mailing list <linux-mm@kvack.org> +Description: Weight configuration interface for nodeN + + The interleave weight for a memory node (N). These weights are + utilized by tasks which have set their mempolicy to + MPOL_WEIGHTED_INTERLEAVE. + + These weights only affect new allocations, and changes at runtime + will not cause migrations on already allocated pages. + + The minimum weight for a node is always 1. + + Minimum weight: 1 + Maximum weight: 255 + + Writing an empty string or `0` will reset the weight to the + system default. The system default may be set by the kernel + or drivers at boot or during hotplug events. diff --git a/Documentation/admin-guide/cifs/introduction.rst b/Documentation/admin-guide/cifs/introduction.rst index 53ea62906aa5b1..ffc6e2564dd558 100644 --- a/Documentation/admin-guide/cifs/introduction.rst +++ b/Documentation/admin-guide/cifs/introduction.rst @@ -28,7 +28,7 @@ Introduction high performance safe distributed caching (leases/oplocks), optional packet signing, large files, Unicode support and other internationalization improvements. Since both Samba server and this filesystem client support the - CIFS Unix extensions, and the Linux client also suppors SMB3 POSIX extensions, + CIFS Unix extensions, and the Linux client also supports SMB3 POSIX extensions, the combination can provide a reasonable alternative to other network and cluster file systems for fileserving in some Linux to Linux environments, not just in Linux to Windows (or Linux to Mac) environments. diff --git a/Documentation/admin-guide/device-mapper/index.rst b/Documentation/admin-guide/device-mapper/index.rst index cde52cc09645e7..cc5aec8615765e 100644 --- a/Documentation/admin-guide/device-mapper/index.rst +++ b/Documentation/admin-guide/device-mapper/index.rst @@ -34,6 +34,8 @@ Device Mapper switch thin-provisioning unstriped + vdo-design + vdo verity writecache zero diff --git a/Documentation/admin-guide/device-mapper/vdo-design.rst b/Documentation/admin-guide/device-mapper/vdo-design.rst new file mode 100644 index 00000000000000..3cd59decbec0bb --- /dev/null +++ b/Documentation/admin-guide/device-mapper/vdo-design.rst @@ -0,0 +1,633 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +================ +Design of dm-vdo +================ + +The dm-vdo (virtual data optimizer) target provides inline deduplication, +compression, zero-block elimination, and thin provisioning. A dm-vdo target +can be backed by up to 256TB of storage, and can present a logical size of +up to 4PB. This target was originally developed at Permabit Technology +Corp. starting in 2009. It was first released in 2013 and has been used in +production environments ever since. It was made open-source in 2017 after +Permabit was acquired by Red Hat. This document describes the design of +dm-vdo. For usage, see vdo.rst in the same directory as this file. + +Because deduplication rates fall drastically as the block size increases, a +vdo target has a maximum block size of 4K. However, it can achieve +deduplication rates of 254:1, i.e. up to 254 copies of a given 4K block can +reference a single 4K of actual storage. It can achieve compression rates +of 14:1. All zero blocks consume no storage at all. + +Theory of Operation +=================== + +The design of dm-vdo is based on the idea that deduplication is a two-part +problem. The first is to recognize duplicate data. The second is to avoid +storing multiple copies of those duplicates. Therefore, dm-vdo has two main +parts: a deduplication index (called UDS) that is used to discover +duplicate data, and a data store with a reference counted block map that +maps from logical block addresses to the actual storage location of the +data. + +Zones and Threading +------------------- + +Due to the complexity of data optimization, the number of metadata +structures involved in a single write operation to a vdo target is larger +than most other targets. Furthermore, because vdo must operate on small +block sizes in order to achieve good deduplication rates, acceptable +performance can only be achieved through parallelism. Therefore, vdo's +design attempts to be lock-free. + +Most of a vdo's main data structures are designed to be easily divided into +"zones" such that any given bio must only access a single zone of any zoned +structure. Safety with minimal locking is achieved by ensuring that during +normal operation, each zone is assigned to a specific thread, and only that +thread will access the portion of the data structure in that zone. +Associated with each thread is a work queue. Each bio is associated with a +request object (the "data_vio") which will be added to a work queue when +the next phase of its operation requires access to the structures in the +zone associated with that queue. + +Another way of thinking about this arrangement is that the work queue for +each zone has an implicit lock on the structures it manages for all its +operations, because vdo guarantees that no other thread will alter those +structures. + +Although each structure is divided into zones, this division is not +reflected in the on-disk representation of each data structure. Therefore, +the number of zones for each structure, and hence the number of threads, +can be reconfigured each time a vdo target is started. + +The Deduplication Index +----------------------- + +In order to identify duplicate data efficiently, vdo was designed to +leverage some common characteristics of duplicate data. From empirical +observations, we gathered two key insights. The first is that in most data +sets with significant amounts of duplicate data, the duplicates tend to +have temporal locality. When a duplicate appears, it is more likely that +other duplicates will be detected, and that those duplicates will have been +written at about the same time. This is why the index keeps records in +temporal order. The second insight is that new data is more likely to +duplicate recent data than it is to duplicate older data and in general, +there are diminishing returns to looking further back in time. Therefore, +when the index is full, it should cull its oldest records to make space for +new ones. Another important idea behind the design of the index is that the +ultimate goal of deduplication is to reduce storage costs. Since there is a +trade-off between the storage saved and the resources expended to achieve +those savings, vdo does not attempt to find every last duplicate block. It +is sufficient to find and eliminate most of the redundancy. + +Each block of data is hashed to produce a 16-byte block name. An index +record consists of this block name paired with the presumed location of +that data on the underlying storage. However, it is not possible to +guarantee that the index is accurate. In the most common case, this occurs +because it is too costly to update the index when a block is over-written +or discarded. Doing so would require either storing the block name along +with the blocks, which is difficult to do efficiently in block-based +storage, or reading and rehashing each block before overwriting it. +Inaccuracy can also result from a hash collision where two different blocks +have the same name. In practice, this is extremely unlikely, but because +vdo does not use a cryptographic hash, a malicious workload could be +constructed. Because of these inaccuracies, vdo treats the locations in the +index as hints, and reads each indicated block to verify that it is indeed +a duplicate before sharing the existing block with a new one. + +Records are collected into groups called chapters. New records are added to +the newest chapter, called the open chapter. This chapter is stored in a +format optimized for adding and modifying records, and the content of the +open chapter is not finalized until it runs out of space for new records. +When the open chapter fills up, it is closed and a new open chapter is +created to collect new records. + +Closing a chapter converts it to a different format which is optimized for +reading. The records are written to a series of record pages based on the +order in which they were received. This means that records with temporal +locality should be on a small number of pages, reducing the I/O required to +retrieve them. The chapter also compiles an index that indicates which +record page contains any given name. This index means that a request for a +name can determine exactly which record page may contain that record, +without having to load the entire chapter from storage. This index uses +only a subset of the block name as its key, so it cannot guarantee that an +index entry refers to the desired block name. It can only guarantee that if +there is a record for this name, it will be on the indicated page. Closed +chapters are read-only structures and their contents are never altered in +any way. + +Once enough records have been written to fill up all the available index +space, the oldest chapter is removed to make space for new chapters. Any +time a request finds a matching record in the index, that record is copied +into the open chapter. This ensures that useful block names remain available +in the index, while unreferenced block names are forgotten over time. + +In order to find records in older chapters, the index also maintains a +higher level structure called the volume index, which contains entries +mapping each block name to the chapter containing its newest record. This +mapping is updated as records for the block name are copied or updated, +ensuring that only the newest record for a given block name can be found. +An older record for a block name will no longer be found even though it has +not been deleted from its chapter. Like the chapter index, the volume index +uses only a subset of the block name as its key and can not definitively +say that a record exists for a name. It can only say which chapter would +contain the record if a record exists. The volume index is stored entirely +in memory and is saved to storage only when the vdo target is shut down. + +From the viewpoint of a request for a particular block name, it will first +look up the name in the volume index. This search will either indicate that +the name is new, or which chapter to search. If it returns a chapter, the +request looks up its name in the chapter index. This will indicate either +that the name is new, or which record page to search. Finally, if it is not +new, the request will look for its name in the indicated record page. +This process may require up to two page reads per request (one for the +chapter index page and one for the request page). However, recently +accessed pages are cached so that these page reads can be amortized across +many block name requests. + +The volume index and the chapter indexes are implemented using a +memory-efficient structure called a delta index. Instead of storing the +entire block name (the key) for each entry, the entries are sorted by name +and only the difference between adjacent keys (the delta) is stored. +Because we expect the hashes to be randomly distributed, the size of the +deltas follows an exponential distribution. Because of this distribution, +the deltas are expressed using a Huffman code to take up even less space. +The entire sorted list of keys is called a delta list. This structure +allows the index to use many fewer bytes per entry than a traditional hash +table, but it is slightly more expensive to look up entries, because a +request must read every entry in a delta list to add up the deltas in order +to find the record it needs. The delta index reduces this lookup cost by +splitting its key space into many sub-lists, each starting at a fixed key +value, so that each individual list is short. + +The default index size can hold 64 million records, corresponding to about +256GB of data. This means that the index can identify duplicate data if the +original data was written within the last 256GB of writes. This range is +called the deduplication window. If new writes duplicate data that is older +than that, the index will not be able to find it because the records of the +older data have been removed. This means that if an application writes a +200 GB file to a vdo target and then immediately writes it again, the two +copies will deduplicate perfectly. Doing the same with a 500 GB file will +result in no deduplication, because the beginning of the file will no +longer be in the index by the time the second write begins (assuming there +is no duplication within the file itself). + +If an application anticipates a data workload that will see useful +deduplication beyond the 256GB threshold, vdo can be configured to use a +larger index with a correspondingly larger deduplication window. (This +configuration can only be set when the target is created, not altered +later. It is important to consider the expected workload for a vdo target +before configuring it.) There are two ways to do this. + +One way is to increase the memory size of the index, which also increases +the amount of backing storage required. Doubling the size of the index will +double the length of the deduplication window at the expense of doubling +the storage size and the memory requirements. + +The other option is to enable sparse indexing. Sparse indexing increases +the deduplication window by a factor of 10, at the expense of also +increasing the storage size by a factor of 10. However with sparse +indexing, the memory requirements do not increase. The trade-off is +slightly more computation per request and a slight decrease in the amount +of deduplication detected. For most workloads with significant amounts of +duplicate data, sparse indexing will detect 97-99% of the deduplication +that a standard index will detect. + +The vio and data_vio Structures +------------------------------- + +A vio (short for Vdo I/O) is conceptually similar to a bio, with additional +fields and data to track vdo-specific information. A struct vio maintains a +pointer to a bio but also tracks other fields specific to the operation of +vdo. The vio is kept separate from its related bio because there are many +circumstances where vdo completes the bio but must continue to do work +related to deduplication or compression. + +Metadata reads and writes, and other writes that originate within vdo, use +a struct vio directly. Application reads and writes use a larger structure +called a data_vio to track information about their progress. A struct +data_vio contain a struct vio and also includes several other fields +related to deduplication and other vdo features. The data_vio is the +primary unit of application work in vdo. Each data_vio proceeds through a +set of steps to handle the application data, after which it is reset and +returned to a pool of data_vios for reuse. + +There is a fixed pool of 2048 data_vios. This number was chosen to bound +the amount of work that is required to recover from a crash. In addition, +benchmarks have indicated that increasing the size of the pool does not +significantly improve performance. + +The Data Store +-------------- + +The data store is implemented by three main data structures, all of which +work in concert to reduce or amortize metadata updates across as many data +writes as possible. + +*The Slab Depot* + +Most of the vdo volume belongs to the slab depot. The depot contains a +collection of slabs. The slabs can be up to 32GB, and are divided into +three sections. Most of a slab consists of a linear sequence of 4K blocks. +These blocks are used either to store data, or to hold portions of the +block map (see below). In addition to the data blocks, each slab has a set +of reference counters, using 1 byte for each data block. Finally each slab +has a journal. + +Reference updates are written to the slab journal. Slab journal blocks are +written out either when they are full, or when the recovery journal +requests they do so in order to allow the main recovery journal (see below) +to free up space. The slab journal is used both to ensure that the main +recovery journal can regularly free up space, and also to amortize the cost +of updating individual reference blocks. The reference counters are kept in +memory and are written out, a block at a time in oldest-dirtied-order, only +when there is a need to reclaim slab journal space. The write operations +are performed in the background as needed so they do not add latency to +particular I/O operations. + +Each slab is independent of every other. They are assigned to "physical +zones" in round-robin fashion. If there are P physical zones, then slab n +is assigned to zone n mod P. + +The slab depot maintains an additional small data structure, the "slab +summary," which is used to reduce the amount of work needed to come back +online after a crash. The slab summary maintains an entry for each slab +indicating whether or not the slab has ever been used, whether all of its +reference count updates have been persisted to storage, and approximately +how full it is. During recovery, each physical zone will attempt to recover +at least one slab, stopping whenever it has recovered a slab which has some +free blocks. Once each zone has some space, or has determined that none is +available, the target can resume normal operation in a degraded mode. Read +and write requests can be serviced, perhaps with degraded performance, +while the remainder of the dirty slabs are recovered. + +*The Block Map* + +The block map contains the logical to physical mapping. It can be thought +of as an array with one entry per logical address. Each entry is 5 bytes, +36 bits of which contain the physical block number which holds the data for +the given logical address. The other 4 bits are used to indicate the nature +of the mapping. Of the 16 possible states, one represents a logical address +which is unmapped (i.e. it has never been written, or has been discarded), +one represents an uncompressed block, and the other 14 states are used to +indicate that the mapped data is compressed, and which of the compression +slots in the compressed block contains the data for this logical address. + +In practice, the array of mapping entries is divided into "block map +pages," each of which fits in a single 4K block. Each block map page +consists of a header and 812 mapping entries. Each mapping page is actually +a leaf of a radix tree which consists of block map pages at each level. +There are 60 radix trees which are assigned to "logical zones" in round +robin fashion. (If there are L logical zones, tree n will belong to zone n +mod L.) At each level, the trees are interleaved, so logical addresses +0-811 belong to tree 0, logical addresses 812-1623 belong to tree 1, and so +on. The interleaving is maintained all the way up to the 60 root nodes. +Choosing 60 trees results in an evenly distributed number of trees per zone +for a large number of possible logical zone counts. The storage for the 60 +tree roots is allocated at format time. All other block map pages are +allocated out of the slabs as needed. This flexible allocation avoids the +need to pre-allocate space for the entire set of logical mappings and also +makes growing the logical size of a vdo relatively easy. + +In operation, the block map maintains two caches. It is prohibitive to keep +the entire leaf level of the trees in memory, so each logical zone +maintains its own cache of leaf pages. The size of this cache is +configurable at target start time. The second cache is allocated at start +time, and is large enough to hold all the non-leaf pages of the entire +block map. This cache is populated as pages are needed. + +*The Recovery Journal* + +The recovery journal is used to amortize updates across the block map and +slab depot. Each write request causes an entry to be made in the journal. +Entries are either "data remappings" or "block map remappings." For a data +remapping, the journal records the logical address affected and its old and +new physical mappings. For a block map remapping, the journal records the +block map page number and the physical block allocated for it. Block map +pages are never reclaimed or repurposed, so the old mapping is always 0. + +Each journal entry is an intent record summarizing the metadata updates +that are required for a data_vio. The recovery journal issues a flush +before each journal block write to ensure that the physical data for the +new block mappings in that block are stable on storage, and journal block +writes are all issued with the FUA bit set to ensure the recovery journal +entries themselves are stable. The journal entry and the data write it +represents must be stable on disk before the other metadata structures may +be updated to reflect the operation. These entries allow the vdo device to +reconstruct the logical to physical mappings after an unexpected +interruption such as a loss of power. + +*Write Path* + +All write I/O to vdo is asynchronous. Each bio will be acknowledged as soon +as vdo has done enough work to guarantee that it can complete the write +eventually. Generally, the data for acknowledged but unflushed write I/O +can be treated as though it is cached in memory. If an application +requires data to be stable on storage, it must issue a flush or write the +data with the FUA bit set like any other asynchronous I/O. Shutting down +the vdo target will also flush any remaining I/O. + +Application write bios follow the steps outlined below. + +1. A data_vio is obtained from the data_vio pool and associated with the + application bio. If there are no data_vios available, the incoming bio + will block until a data_vio is available. This provides back pressure + to the application. The data_vio pool is protected by a spin lock. + + The newly acquired data_vio is reset and the bio's data is copied into + the data_vio if it is a write and the data is not all zeroes. The data + must be copied because the application bio can be acknowledged before + the data_vio processing is complete, which means later processing steps + will no longer have access to the application bio. The application bio + may also be smaller than 4K, in which case the data_vio will have + already read the underlying block and the data is instead copied over + the relevant portion of the larger block. + +2. The data_vio places a claim (the "logical lock") on the logical address + of the bio. It is vital to prevent simultaneous modifications of the + same logical address, because deduplication involves sharing blocks. + This claim is implemented as an entry in a hashtable where the key is + the logical address and the value is a pointer to the data_vio + currently handling that address. + + If a data_vio looks in the hashtable and finds that another data_vio is + already operating on that logical address, it waits until the previous + operation finishes. It also sends a message to inform the current + lock holder that it is waiting. Most notably, a new data_vio waiting + for a logical lock will flush the previous lock holder out of the + compression packer (step 8d) rather than allowing it to continue + waiting to be packed. + + This stage requires the data_vio to get an implicit lock on the + appropriate logical zone to prevent concurrent modifications of the + hashtable. This implicit locking is handled by the zone divisions + described above. + +3. The data_vio traverses the block map tree to ensure that all the + necessary internal tree nodes have been allocated, by trying to find + the leaf page for its logical address. If any interior tree page is + missing, it is allocated at this time out of the same physical storage + pool used to store application data. + + a. If any page-node in the tree has not yet been allocated, it must be + allocated before the write can continue. This step requires the + data_vio to lock the page-node that needs to be allocated. This + lock, like the logical block lock in step 2, is a hashtable entry + that causes other data_vios to wait for the allocation process to + complete. + + The implicit logical zone lock is released while the allocation is + happening, in order to allow other operations in the same logical + zone to proceed. The details of allocation are the same as in + step 4. Once a new node has been allocated, that node is added to + the tree using a similar process to adding a new data block mapping. + The data_vio journals the intent to add the new node to the block + map tree (step 10), updates the reference count of the new block + (step 11), and reacquires the implicit logical zone lock to add the + new mapping to the parent tree node (step 12). Once the tree is + updated, the data_vio proceeds down the tree. Any other data_vios + waiting on this allocation also proceed. + + b. In the steady-state case, the block map tree nodes will already be + allocated, so the data_vio just traverses the tree until it finds + the required leaf node. The location of the mapping (the "block map + slot") is recorded in the data_vio so that later steps do not need + to traverse the tree again. The data_vio then releases the implicit + logical zone lock. + +4. If the block is a zero block, skip to step 9. Otherwise, an attempt is + made to allocate a free data block. This allocation ensures that the + data_vio can write its data somewhere even if deduplication and + compression are not possible. This stage gets an implicit lock on a + physical zone to search for free space within that zone. + + The data_vio will search each slab in a zone until it finds a free + block or decides there are none. If the first zone has no free space, + it will proceed to search the next physical zone by taking the implicit + lock for that zone and releasing the previous one until it finds a + free block or runs out of zones to search. The data_vio will acquire a + struct pbn_lock (the "physical block lock") on the free block. The + struct pbn_lock also has several fields to record the various kinds of + claims that data_vios can have on physical blocks. The pbn_lock is + added to a hashtable like the logical block locks in step 2. This + hashtable is also covered by the implicit physical zone lock. The + reference count of the free block is updated to prevent any other + data_vio from considering it free. The reference counters are a + sub-component of the slab and are thus also covered by the implicit + physical zone lock. + +5. If an allocation was obtained, the data_vio has all the resources it + needs to complete the write. The application bio can safely be + acknowledged at this point. The acknowledgment happens on a separate + thread to prevent the application callback from blocking other data_vio + operations. + + If an allocation could not be obtained, the data_vio continues to + attempt to deduplicate or compress the data, but the bio is not + acknowledged because the vdo device may be out of space. + +6. At this point vdo must determine where to store the application data. + The data_vio's data is hashed and the hash (the "record name") is + recorded in the data_vio. + +7. The data_vio reserves or joins a struct hash_lock, which manages all of + the data_vios currently writing the same data. Active hash locks are + tracked in a hashtable similar to the way logical block locks are + tracked in step 2. This hashtable is covered by the implicit lock on + the hash zone. + + If there is no existing hash lock for this data_vio's record_name, the + data_vio obtains a hash lock from the pool, adds it to the hashtable, + and sets itself as the new hash lock's "agent." The hash_lock pool is + also covered by the implicit hash zone lock. The hash lock agent will + do all the work to decide where the application data will be + written. If a hash lock for the data_vio's record_name already exists, + and the data_vio's data is the same as the agent's data, the new + data_vio will wait for the agent to complete its work and then share + its result. + + In the rare case that a hash lock exists for the data_vio's hash but + the data does not match the hash lock's agent, the data_vio skips to + step 8h and attempts to write its data directly. This can happen if two + different data blocks produce the same hash, for example. + +8. The hash lock agent attempts to deduplicate or compress its data with + the following steps. + + a. The agent initializes and sends its embedded deduplication request + (struct uds_request) to the deduplication index. This does not + require the data_vio to get any locks because the index components + manage their own locking. The data_vio waits until it either gets a + response from the index or times out. + + b. If the deduplication index returns advice, the data_vio attempts to + obtain a physical block lock on the indicated physical address, in + order to read the data and verify that it is the same as the + data_vio's data, and that it can accept more references. If the + physical address is already locked by another data_vio, the data at + that address may soon be overwritten so it is not safe to use the + address for deduplication. + + c. If the data matches and the physical block can add references, the + agent and any other data_vios waiting on it will record this + physical block as their new physical address and proceed to step 9 + to record their new mapping. If there are more data_vios in the hash + lock than there are references available, one of the remaining + data_vios becomes the new agent and continues to step 8d as if no + valid advice was returned. + + d. If no usable duplicate block was found, the agent first checks that + it has an allocated physical block (from step 3) that it can write + to. If the agent does not have an allocation, some other data_vio in + the hash lock that does have an allocation takes over as agent. If + none of the data_vios have an allocated physical block, these writes + are out of space, so they proceed to step 13 for cleanup. + + e. The agent attempts to compress its data. If the data does not + compress, the data_vio will continue to step 8h to write its data + directly. + + If the compressed size is small enough, the agent will release the + implicit hash zone lock and go to the packer (struct packer) where + it will be placed in a bin (struct packer_bin) along with other + data_vios. All compression operations require the implicit lock on + the packer zone. + + The packer can combine up to 14 compressed blocks in a single 4k + data block. Compression is only helpful if vdo can pack at least 2 + data_vios into a single data block. This means that a data_vio may + wait in the packer for an arbitrarily long time for other data_vios + to fill out the compressed block. There is a mechanism for vdo to + evict waiting data_vios when continuing to wait would cause + problems. Circumstances causing an eviction include an application + flush, device shutdown, or a subsequent data_vio trying to overwrite + the same logical block address. A data_vio may also be evicted from + the packer if it cannot be paired with any other compressed block + before more compressible blocks need to use its bin. An evicted + data_vio will proceed to step 8h to write its data directly. + + f. If the agent fills a packer bin, either because all 14 of its slots + are used or because it has no remaining space, it is written out + using the allocated physical block from one of its data_vios. Step + 8d has already ensured that an allocation is available. + + g. Each data_vio sets the compressed block as its new physical address. + The data_vio obtains an implicit lock on the physical zone and + acquires the struct pbn_lock for the compressed block, which is + modified to be a shared lock. Then it releases the implicit physical + zone lock and proceeds to step 8i. + + h. Any data_vio evicted from the packer will have an allocation from + step 3. It will write its data to that allocated physical block. + + i. After the data is written, if the data_vio is the agent of a hash + lock, it will reacquire the implicit hash zone lock and share its + physical address with as many other data_vios in the hash lock as + possible. Each data_vio will then proceed to step 9 to record its + new mapping. + + j. If the agent actually wrote new data (whether compressed or not), + the deduplication index is updated to reflect the location of the + new data. The agent then releases the implicit hash zone lock. + +9. The data_vio determines the previous mapping of the logical address. + There is a cache for block map leaf pages (the "block map cache"), + because there are usually too many block map leaf nodes to store + entirely in memory. If the desired leaf page is not in the cache, the + data_vio will reserve a slot in the cache and load the desired page + into it, possibly evicting an older cached page. The data_vio then + finds the current physical address for this logical address (the "old + physical mapping"), if any, and records it. This step requires a lock + on the block map cache structures, covered by the implicit logical zone + lock. + +10. The data_vio makes an entry in the recovery journal containing the + logical block address, the old physical mapping, and the new physical + mapping. Making this journal entry requires holding the implicit + recovery journal lock. The data_vio will wait in the journal until all + recovery blocks up to the one containing its entry have been written + and flushed to ensure the transaction is stable on storage. + +11. Once the recovery journal entry is stable, the data_vio makes two slab + journal entries: an increment entry for the new mapping, and a + decrement entry for the old mapping. These two operations each require + holding a lock on the affected physical slab, covered by its implicit + physical zone lock. For correctness during recovery, the slab journal + entries in any given slab journal must be in the same order as the + corresponding recovery journal entries. Therefore, if the two entries + are in different zones, they are made concurrently, and if they are in + the same zone, the increment is always made before the decrement in + order to avoid underflow. After each slab journal entry is made in + memory, the associated reference count is also updated in memory. + +12. Once both of the reference count updates are done, the data_vio + acquires the implicit logical zone lock and updates the + logical-to-physical mapping in the block map to point to the new + physical block. At this point the write operation is complete. + +13. If the data_vio has a hash lock, it acquires the implicit hash zone + lock and releases its hash lock to the pool. + + The data_vio then acquires the implicit physical zone lock and releases + the struct pbn_lock it holds for its allocated block. If it had an + allocation that it did not use, it also sets the reference count for + that block back to zero to free it for use by subsequent data_vios. + + The data_vio then acquires the implicit logical zone lock and releases + the logical block lock acquired in step 2. + + The application bio is then acknowledged if it has not previously been + acknowledged, and the data_vio is returned to the pool. + +*Read Path* + +An application read bio follows a much simpler set of steps. It does steps +1 and 2 in the write path to obtain a data_vio and lock its logical +address. If there is already a write data_vio in progress for that logical +address that is guaranteed to complete, the read data_vio will copy the +data from the write data_vio and return it. Otherwise, it will look up the +logical-to-physical mapping by traversing the block map tree as in step 3, +and then read and possibly decompress the indicated data at the indicated +physical block address. A read data_vio will not allocate block map tree +nodes if they are missing. If the interior block map nodes do not exist +yet, the logical block map address must still be unmapped and the read +data_vio will return all zeroes. A read data_vio handles cleanup and +acknowledgment as in step 13, although it only needs to release the logical +lock and return itself to the pool. + +*Small Writes* + +All storage within vdo is managed as 4KB blocks, but it can accept writes +as small as 512 bytes. Processing a write that is smaller than 4K requires +a read-modify-write operation that reads the relevant 4K block, copies the +new data over the approriate sectors of the block, and then launches a +write operation for the modified data block. The read and write stages of +this operation are nearly identical to the normal read and write +operations, and a single data_vio is used throughout this operation. + +*Recovery* + +When a vdo is restarted after a crash, it will attempt to recover from the +recovery journal. During the pre-resume phase of the next start, the +recovery journal is read. The increment portion of valid entries are played +into the block map. Next, valid entries are played, in order as required, +into the slab journals. Finally, each physical zone attempts to replay at +least one slab journal to reconstruct the reference counts of one slab. +Once each zone has some free space (or has determined that it has none), +the vdo comes back online, while the remainder of the slab journals are +used to reconstruct the rest of the reference counts in the background. + +*Read-only Rebuild* + +If a vdo encounters an unrecoverable error, it will enter read-only mode. +This mode indicates that some previously acknowledged data may have been +lost. The vdo may be instructed to rebuild as best it can in order to +return to a writable state. However, this is never done automatically due +to the possibility that data has been lost. During a read-only rebuild, the +block map is recovered from the recovery journal as before. However, the +reference counts are not rebuilt from the slab journals. Instead, the +reference counts are zeroed, the entire block map is traversed, and the +reference counts are updated from the block mappings. While this may lose +some data, it ensures that the block map and reference counts are +consistent with each other. This allows vdo to resume normal operation and +accept further writes. diff --git a/Documentation/admin-guide/device-mapper/vdo.rst b/Documentation/admin-guide/device-mapper/vdo.rst new file mode 100644 index 00000000000000..7e1ecafdf91e31 --- /dev/null +++ b/Documentation/admin-guide/device-mapper/vdo.rst @@ -0,0 +1,406 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +dm-vdo +====== + +The dm-vdo (virtual data optimizer) device mapper target provides +block-level deduplication, compression, and thin provisioning. As a device +mapper target, it can add these features to the storage stack, compatible +with any file system. The vdo target does not protect against data +corruption, relying instead on integrity protection of the storage below +it. It is strongly recommended that lvm be used to manage vdo volumes. See +lvmvdo(7). + +Userspace component +=================== + +Formatting a vdo volume requires the use of the 'vdoformat' tool, available +at: + +https://github.com/dm-vdo/vdo/ + +In most cases, a vdo target will recover from a crash automatically the +next time it is started. In cases where it encountered an unrecoverable +error (either during normal operation or crash recovery) the target will +enter or come up in read-only mode. Because read-only mode is indicative of +data-loss, a positive action must be taken to bring vdo out of read-only +mode. The 'vdoforcerebuild' tool, available from the same repo, is used to +prepare a read-only vdo to exit read-only mode. After running this tool, +the vdo target will rebuild its metadata the next time it is +started. Although some data may be lost, the rebuilt vdo's metadata will be +internally consistent and the target will be writable again. + +The repo also contains additional userspace tools which can be used to +inspect a vdo target's on-disk metadata. Fortunately, these tools are +rarely needed except by dm-vdo developers. + +Metadata requirements +===================== + +Each vdo volume reserves 3GB of space for metadata, or more depending on +its configuration. It is helpful to check that the space saved by +deduplication and compression is not cancelled out by the metadata +requirements. An estimation of the space saved for a specific dataset can +be computed with the vdo estimator tool, which is available at: + +https://github.com/dm-vdo/vdoestimator/ + +Target interface +================ + +Table line +---------- + +:: + + <offset> <logical device size> vdo V4 <storage device> + <storage device size> <minimum I/O size> <block map cache size> + <block map era length> [optional arguments] + + +Required parameters: + + offset: + The offset, in sectors, at which the vdo volume's logical + space begins. + + logical device size: + The size of the device which the vdo volume will service, + in sectors. Must match the current logical size of the vdo + volume. + + storage device: + The device holding the vdo volume's data and metadata. + + storage device size: + The size of the device holding the vdo volume, as a number + of 4096-byte blocks. Must match the current size of the vdo + volume. + + minimum I/O size: + The minimum I/O size for this vdo volume to accept, in + bytes. Valid values are 512 or 4096. The recommended value + is 4096. + + block map cache size: + The size of the block map cache, as a number of 4096-byte + blocks. The minimum and recommended value is 32768 blocks. + If the logical thread count is non-zero, the cache size + must be at least 4096 blocks per logical thread. + + block map era length: + The speed with which the block map cache writes out + modified block map pages. A smaller era length is likely to + reduce the amount of time spent rebuilding, at the cost of + increased block map writes during normal operation. The + maximum and recommended value is 16380; the minimum value + is 1. + +Optional parameters: +-------------------- +Some or all of these parameters may be specified as <key> <value> pairs. + +Thread related parameters: + +Different categories of work are assigned to separate thread groups, and +the number of threads in each group can be configured separately. + +If <hash>, <logical>, and <physical> are all set to 0, the work handled by +all three thread types will be handled by a single thread. If any of these +values are non-zero, all of them must be non-zero. + + ack: + The number of threads used to complete bios. Since + completing a bio calls an arbitrary completion function + outside the vdo volume, threads of this type allow the vdo + volume to continue processing requests even when bio + completion is slow. The default is 1. + + bio: + The number of threads used to issue bios to the underlying + storage. Threads of this type allow the vdo volume to + continue processing requests even when bio submission is + slow. The default is 4. + + bioRotationInterval: + The number of bios to enqueue on each bio thread before + switching to the next thread. The value must be greater + than 0 and not more than 1024; the default is 64. + + cpu: + The number of threads used to do CPU-intensive work, such + as hashing and compression. The default is 1. + + hash: + The number of threads used to manage data comparisons for + deduplication based on the hash value of data blocks. The + default is 0. + + logical: + The number of threads used to manage caching and locking + based on the logical address of incoming bios. The default + is 0; the maximum is 60. + + physical: + The number of threads used to manage administration of the + underlying storage device. At format time, a slab size for + the vdo is chosen; the vdo storage device must be large + enough to have at least 1 slab per physical thread. The + default is 0; the maximum is 16. + +Miscellaneous parameters: + + maxDiscard: + The maximum size of discard bio accepted, in 4096-byte + blocks. I/O requests to a vdo volume are normally split + into 4096-byte blocks, and processed up to 2048 at a time. + However, discard requests to a vdo volume can be + automatically split to a larger size, up to <maxDiscard> + 4096-byte blocks in a single bio, and are limited to 1500 + at a time. Increasing this value may provide better overall + performance, at the cost of increased latency for the + individual discard requests. The default and minimum is 1; + the maximum is UINT_MAX / 4096. + + deduplication: + Whether deduplication is enabled. The default is 'on'; the + acceptable values are 'on' and 'off'. + + compression: + Whether compression is enabled. The default is 'off'; the + acceptable values are 'on' and 'off'. + +Device modification +------------------- + +A modified table may be loaded into a running, non-suspended vdo volume. +The modifications will take effect when the device is next resumed. The +modifiable parameters are <logical device size>, <physical device size>, +<maxDiscard>, <compression>, and <deduplication>. + +If the logical device size or physical device size are changed, upon +successful resume vdo will store the new values and require them on future +startups. These two parameters may not be decreased. The logical device +size may not exceed 4 PB. The physical device size must increase by at +least 32832 4096-byte blocks if at all, and must not exceed the size of the +underlying storage device. Additionally, when formatting the vdo device, a +slab size is chosen: the physical device size may never increase above the +size which provides 8192 slabs, and each increase must be large enough to +add at least one new slab. + +Examples: + +Start a previously-formatted vdo volume with 1 GB logical space and 1 GB +physical space, storing to /dev/dm-1 which has more than 1 GB of space. + +:: + + dmsetup create vdo0 --table \ + "0 2097152 vdo V4 /dev/dm-1 262144 4096 32768 16380" + +Grow the logical size to 4 GB. + +:: + + dmsetup reload vdo0 --table \ + "0 8388608 vdo V4 /dev/dm-1 262144 4096 32768 16380" + dmsetup resume vdo0 + +Grow the physical size to 2 GB. + +:: + + dmsetup reload vdo0 --table \ + "0 8388608 vdo V4 /dev/dm-1 524288 4096 32768 16380" + dmsetup resume vdo0 + +Grow the physical size by 1 GB more and increase max discard sectors. + +:: + + dmsetup reload vdo0 --table \ + "0 10485760 vdo V4 /dev/dm-1 786432 4096 32768 16380 maxDiscard 8" + dmsetup resume vdo0 + +Stop the vdo volume. + +:: + + dmsetup remove vdo0 + +Start the vdo volume again. Note that the logical and physical device sizes +must still match, but other parameters can change. + +:: + + dmsetup create vdo1 --table \ + "0 10485760 vdo V4 /dev/dm-1 786432 512 65550 5000 hash 1 logical 3 physical 2" + +Messages +-------- +All vdo devices accept messages in the form: + +:: + dmsetup message <target-name> 0 <message-name> <message-parameters> + +The messages are: + + stats: + Outputs the current view of the vdo statistics. Mostly used + by the vdostats userspace program to interpret the output + buffer. + + dump: + Dumps many internal structures to the system log. This is + not always safe to run, so it should only be used to debug + a hung vdo. Optional parameters to specify structures to + dump are: + + viopool: The pool of I/O requests incoming bios + pools: A synonym of 'viopool' + vdo: Most of the structures managing on-disk data + queues: Basic information about each vdo thread + threads: A synonym of 'queues' + default: Equivalent to 'queues vdo' + all: All of the above. + + dump-on-shutdown: + Perform a default dump next time vdo shuts down. + + +Status +------ + +:: + + <device> <operating mode> <in recovery> <index state> + <compression state> <physical blocks used> <total physical blocks> + + device: + The name of the vdo volume. + + operating mode: + The current operating mode of the vdo volume; values may be + 'normal', 'recovering' (the volume has detected an issue + with its metadata and is attempting to repair itself), and + 'read-only' (an error has occurred that forces the vdo + volume to only support read operations and not writes). + + in recovery: + Whether the vdo volume is currently in recovery mode; + values may be 'recovering' or '-' which indicates not + recovering. + + index state: + The current state of the deduplication index in the vdo + volume; values may be 'closed', 'closing', 'error', + 'offline', 'online', 'opening', and 'unknown'. + + compression state: + The current state of compression in the vdo volume; values + may be 'offline' and 'online'. + + used physical blocks: + The number of physical blocks in use by the vdo volume. + + total physical blocks: + The total number of physical blocks the vdo volume may use; + the difference between this value and the + <used physical blocks> is the number of blocks the vdo + volume has left before being full. + +Memory Requirements +=================== + +A vdo target requires a fixed 38 MB of RAM along with the following amounts +that scale with the target: + +- 1.15 MB of RAM for each 1 MB of configured block map cache size. The + block map cache requires a minimum of 150 MB. +- 1.6 MB of RAM for each 1 TB of logical space. +- 268 MB of RAM for each 1 TB of physical storage managed by the volume. + +The deduplication index requires additional memory which scales with the +size of the deduplication window. For dense indexes, the index requires 1 +GB of RAM per 1 TB of window. For sparse indexes, the index requires 1 GB +of RAM per 10 TB of window. The index configuration is set when the target +is formatted and may not be modified. + +Module Parameters +================= + +The vdo driver has a numeric parameter 'log_level' which controls the +verbosity of logging from the driver. The default setting is 6 +(LOGLEVEL_INFO and more severe messages). + +Run-time Usage +============== + +When using dm-vdo, it is important to be aware of the ways in which its +behavior differs from other storage targets. + +- There is no guarantee that over-writes of existing blocks will succeed. + Because the underlying storage may be multiply referenced, over-writing + an existing block generally requires a vdo to have a free block + available. + +- When blocks are no longer in use, sending a discard request for those + blocks lets the vdo release references for those blocks. If the vdo is + thinly provisioned, discarding unused blocks is essential to prevent the + target from running out of space. However, due to the sharing of + duplicate blocks, no discard request for any given logical block is + guaranteed to reclaim space. + +- Assuming the underlying storage properly implements flush requests, vdo + is resilient against crashes, however, unflushed writes may or may not + persist after a crash. + +- Each write to a vdo target entails a significant amount of processing. + However, much of the work is paralellizable. Therefore, vdo targets + achieve better throughput at higher I/O depths, and can support up 2048 + requests in parallel. + +Tuning +====== + +The vdo device has many options, and it can be difficult to make optimal +choices without perfect knowledge of the workload. Additionally, most +configuration options must be set when a vdo target is started, and cannot +be changed without shutting it down completely; the configuration cannot be +changed while the target is active. Ideally, tuning with simulated +workloads should be performed before deploying vdo in production +environments. + +The most important value to adjust is the block map cache size. In order to +service a request for any logical address, a vdo must load the portion of +the block map which holds the relevant mapping. These mappings are cached. +Performance will suffer when the working set does not fit in the cache. By +default, a vdo allocates 128 MB of metadata cache in RAM to support +efficient access to 100 GB of logical space at a time. It should be scaled +up proportionally for larger working sets. + +The logical and physical thread counts should also be adjusted. A logical +thread controls a disjoint section of the block map, so additional logical +threads increase parallelism and can increase throughput. Physical threads +control a disjoint section of the data blocks, so additional physical +threads can also increase throughput. However, excess threads can waste +resources and increase contention. + +Bio submission threads control the parallelism involved in sending I/O to +the underlying storage; fewer threads mean there is more opportunity to +reorder I/O requests for performance benefit, but also that each I/O +request has to wait longer before being submitted. + +Bio acknowledgment threads are used for finishing I/O requests. This is +done on dedicated threads since the amount of work required to execute a +bio's callback can not be controlled by the vdo itself. Usually one thread +is sufficient but additional threads may be beneficial, particularly when +bios have CPU-heavy callbacks. + +CPU threads are used for hashing and for compression; in workloads with +compression enabled, more threads may result in higher throughput. + +Hash threads are used to sort active requests by hash and determine whether +they should deduplicate; the most CPU intensive actions done by these +threads are comparison of 4096-byte data blocks. In most cases, a single +hash thread is sufficient. diff --git a/Documentation/admin-guide/edid.rst b/Documentation/admin-guide/edid.rst index 80deeb21a265fa..1a9b965aa4863a 100644 --- a/Documentation/admin-guide/edid.rst +++ b/Documentation/admin-guide/edid.rst @@ -24,37 +24,4 @@ restrictions later on. As a remedy for such situations, the kernel configuration item CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an individually prepared or corrected EDID data set in the /lib/firmware -directory from where it is loaded via the firmware interface. The code -(see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for -commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200, -1680x1050, 1920x1080) as binary blobs, but the kernel source tree does -not contain code to create these data. In order to elucidate the origin -of the built-in binary EDID blobs and to facilitate the creation of -individual data for a specific misbehaving monitor, commented sources -and a Makefile environment are given here. - -To create binary EDID and C source code files from the existing data -material, simply type "make" in tools/edid/. - -If you want to create your own EDID file, copy the file 1024x768.S, -replace the settings with your own data and add a new target to the -Makefile. Please note that the EDID data structure expects the timing -values in a different way as compared to the standard X11 format. - -X11: - HTimings: - hdisp hsyncstart hsyncend htotal - VTimings: - vdisp vsyncstart vsyncend vtotal - -EDID:: - - #define XPIX hdisp - #define XBLANK htotal-hdisp - #define XOFFSET hsyncstart-hdisp - #define XPULSE hsyncend-hsyncstart - - #define YPIX vdisp - #define YBLANK vtotal-vdisp - #define YOFFSET vsyncstart-vdisp - #define YPULSE vsyncend-vsyncstart +directory from where it is loaded via the firmware interface. diff --git a/Documentation/admin-guide/gpio/gpio-mockup.rst b/Documentation/admin-guide/gpio/gpio-mockup.rst index 493071da1738c7..d6e7438a7550a9 100644 --- a/Documentation/admin-guide/gpio/gpio-mockup.rst +++ b/Documentation/admin-guide/gpio/gpio-mockup.rst @@ -3,6 +3,14 @@ GPIO Testing Driver =================== +.. note:: + + This module has been obsoleted by the more flexible gpio-sim.rst. + New developments should use that API and existing developments are + encouraged to migrate as soon as possible. + This module will continue to be maintained but no new features will be + added. + The GPIO Testing Driver (gpio-mockup) provides a way to create simulated GPIO chips for testing purposes. The lines exposed by these chips can be accessed using the standard GPIO character device interface as well as manipulated diff --git a/Documentation/admin-guide/gpio/index.rst b/Documentation/admin-guide/gpio/index.rst index f6861ca16ffe6b..460afd29617e0d 100644 --- a/Documentation/admin-guide/gpio/index.rst +++ b/Documentation/admin-guide/gpio/index.rst @@ -1,16 +1,16 @@ .. SPDX-License-Identifier: GPL-2.0 ==== -gpio +GPIO ==== .. toctree:: :maxdepth: 1 + Character Device Userspace API <../../userspace-api/gpio/chardev> gpio-aggregator - sysfs - gpio-mockup gpio-sim + Obsolete APIs <obsolete> .. only:: subproject and html diff --git a/Documentation/admin-guide/gpio/obsolete.rst b/Documentation/admin-guide/gpio/obsolete.rst new file mode 100644 index 00000000000000..5adbff02d61f43 --- /dev/null +++ b/Documentation/admin-guide/gpio/obsolete.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================== +Obsolete GPIO APIs +================== + +.. toctree:: + :maxdepth: 1 + + Character Device Userspace API (v1) <../../userspace-api/gpio/chardev_v1> + Sysfs Interface <../../userspace-api/gpio/sysfs> + Mockup Testing Module <gpio-mockup> + diff --git a/Documentation/admin-guide/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst index bced9e4b6e0899..0f714fc945acf4 100644 --- a/Documentation/admin-guide/kdump/vmcoreinfo.rst +++ b/Documentation/admin-guide/kdump/vmcoreinfo.rst @@ -65,11 +65,11 @@ Defines the beginning of the text section. In general, _stext indicates the kernel start address. Used to convert a virtual address from the direct kernel map to a physical address. -vmap_area_list --------------- +VMALLOC_START +------------- -Stores the virtual area list. makedumpfile gets the vmalloc start value -from this variable and its value is necessary for vmalloc translation. +Stores the base address of vmalloc area. makedumpfile gets this value +since is necessary for vmalloc translation. mem_map ------- diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index b3b5ce13de2b3f..bb884c14b2f679 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -374,6 +374,11 @@ selects a performance level in this range and appropriate to the current workload. + amd_prefcore= + [X86] + disable + Disable amd-pstate preferred core. + amijoy.map= [HW,JOY] Amiga joystick support Map of devices attached to JOY0DAT and JOY1DAT Format: <a>,<b> @@ -1168,16 +1173,10 @@ panels may send no or incorrect EDID data sets. This parameter allows to specify an EDID data sets in the /lib/firmware directory that are used instead. - Generic built-in EDID data sets are used, if one of - edid/1024x768.bin, edid/1280x1024.bin, - edid/1680x1050.bin, or edid/1920x1080.bin is given - and no file with the same name exists. Details and - instructions how to build your own EDID data are - available in Documentation/admin-guide/edid.rst. An EDID - data set will only be used for a particular connector, - if its name and a colon are prepended to the EDID - name. Each connector may use a unique EDID data - set by separating the files with a comma. An EDID + An EDID data set will only be used for a particular + connector, if its name and a colon are prepended to + the EDID name. Each connector may use a unique EDID + data set by separating the files with a comma. An EDID data set with no connector name will be used for any connectors not explicitly specified. @@ -1573,12 +1572,28 @@ The above will cause the "foo" tracing instance to trigger a snapshot at the end of boot up. - ftrace_dump_on_oops[=orig_cpu] + ftrace_dump_on_oops[=2(orig_cpu) | =<instance>][,<instance> | + ,<instance>=2(orig_cpu)] [FTRACE] will dump the trace buffers on oops. - If no parameter is passed, ftrace will dump - buffers of all CPUs, but if you pass orig_cpu, it will - dump only the buffer of the CPU that triggered the - oops. + If no parameter is passed, ftrace will dump global + buffers of all CPUs, if you pass 2 or orig_cpu, it + will dump only the buffer of the CPU that triggered + the oops, or the specific instance will be dumped if + its name is passed. Multiple instance dump is also + supported, and instances are separated by commas. Each + instance supports only dump on CPU that triggered the + oops by passing 2 or orig_cpu to it. + + ftrace_dump_on_oops=foo=orig_cpu + + The above will dump only the buffer of "foo" instance + on CPU that triggered the oops. + + ftrace_dump_on_oops,foo,bar=orig_cpu + + The above will dump global buffer on all CPUs, the + buffer of "foo" instance on all CPUs and the buffer + of "bar" instance on CPU that triggered the oops. ftrace_filter=[function-list] [FTRACE] Limit the functions traced by the function @@ -1760,6 +1775,17 @@ (that will set all pages holding image data during restoration read-only). + hibernate.compressor= [HIBERNATION] Compression algorithm to be + used with hibernation. + Format: { lzo | lz4 } + Default: lzo + + lzo: Select LZO compression algorithm to + compress/decompress hibernation image. + + lz4: Select LZ4 compression algorithm to + compress/decompress hibernation image. + highmem=nn[KMG] [KNL,BOOT,EARLY] forces the highmem zone to have an exact size of <nn>. This works even on boxes that have no highmem otherwise. This also works to reduce highmem @@ -3771,10 +3797,6 @@ no5lvl [X86-64,RISCV,EARLY] Disable 5-level paging mode. Forces kernel to use 4-level paging instead. - noaliencache [MM, NUMA, SLAB] Disables the allocation of alien - caches in the slab allocator. Saves per-node memory, - but will impact performance. - noalign [KNL,ARM] noaltinstr [S390,EARLY] Disables alternative instructions @@ -4205,6 +4227,7 @@ bit 4: print ftrace buffer bit 5: print all printk messages in buffer bit 6: print all CPUs backtrace (if available in the arch) + bit 7: print only tasks in uninterruptible (blocked) state *Be aware* that this option may print a _lot_ of lines, so there are risks of losing older messages in the log. Use this option carefully, maybe worth to setup a @@ -5930,65 +5953,58 @@ simeth= [IA-64] simscsi= - slram= [HW,MTD] - - slab_merge [MM] - Enable merging of slabs with similar size when the - kernel is built without CONFIG_SLAB_MERGE_DEFAULT. - - slab_nomerge [MM] - Disable merging of slabs with similar size. May be - necessary if there is some reason to distinguish - allocs to different slabs, especially in hardened - environments where the risk of heap overflows and - layout control by attackers can usually be - frustrated by disabling merging. This will reduce - most of the exposure of a heap attack to a single - cache (risks via metadata attacks are mostly - unchanged). Debug options disable merging on their - own. - For more information see Documentation/mm/slub.rst. - - slab_max_order= [MM, SLAB] - Determines the maximum allowed order for slabs. - A high setting may cause OOMs due to memory - fragmentation. Defaults to 1 for systems with - more than 32MB of RAM, 0 otherwise. - - slub_debug[=options[,slabs][;[options[,slabs]]...] [MM, SLUB] - Enabling slub_debug allows one to determine the + slab_debug[=options[,slabs][;[options[,slabs]]...] [MM] + Enabling slab_debug allows one to determine the culprit if slab objects become corrupted. Enabling - slub_debug can create guard zones around objects and + slab_debug can create guard zones around objects and may poison objects when not in use. Also tracks the last alloc / free. For more information see Documentation/mm/slub.rst. + (slub_debug legacy name also accepted for now) - slub_max_order= [MM, SLUB] + slab_max_order= [MM] Determines the maximum allowed order for slabs. A high setting may cause OOMs due to memory fragmentation. For more information see Documentation/mm/slub.rst. + (slub_max_order legacy name also accepted for now) - slub_min_objects= [MM, SLUB] + slab_merge [MM] + Enable merging of slabs with similar size when the + kernel is built without CONFIG_SLAB_MERGE_DEFAULT. + (slub_merge legacy name also accepted for now) + + slab_min_objects= [MM] The minimum number of objects per slab. SLUB will - increase the slab order up to slub_max_order to + increase the slab order up to slab_max_order to generate a sufficiently large slab able to contain the number of objects indicated. The higher the number of objects the smaller the overhead of tracking slabs and the less frequently locks need to be acquired. For more information see Documentation/mm/slub.rst. + (slub_min_objects legacy name also accepted for now) - slub_min_order= [MM, SLUB] + slab_min_order= [MM] Determines the minimum page order for slabs. Must be - lower than slub_max_order. - For more information see Documentation/mm/slub.rst. + lower or equal to slab_max_order. For more information see + Documentation/mm/slub.rst. + (slub_min_order legacy name also accepted for now) - slub_merge [MM, SLUB] - Same with slab_merge. + slab_nomerge [MM] + Disable merging of slabs with similar size. May be + necessary if there is some reason to distinguish + allocs to different slabs, especially in hardened + environments where the risk of heap overflows and + layout control by attackers can usually be + frustrated by disabling merging. This will reduce + most of the exposure of a heap attack to a single + cache (risks via metadata attacks are mostly + unchanged). Debug options disable merging on their + own. + For more information see Documentation/mm/slub.rst. + (slub_nomerge legacy name also accepted for now) - slub_nomerge [MM, SLUB] - Same with slab_nomerge. This is supported for legacy. - See slab_nomerge for more information. + slram= [HW,MTD] smart2= [HW] Format: <io1>[,<io2>[,...,<io8>]] diff --git a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst index 98d30401017012..7f674a6cfa8a7b 100644 --- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst +++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst @@ -444,7 +444,9 @@ event code Key Notes 0x1008 0x07 FN+F8 IBM: toggle screen expand Lenovo: configure UltraNav, - or toggle screen expand + or toggle screen expand. + On newer platforms (2024+) + replaced by 0x131f (see below) 0x1009 0x08 FN+F9 - @@ -504,6 +506,9 @@ event code Key Notes 0x1019 0x18 unknown +0x131f ... FN+F8 Platform Mode change. + Implemented in driver. + ... ... ... 0x1020 0x1F unknown diff --git a/Documentation/admin-guide/media/visl.rst b/Documentation/admin-guide/media/visl.rst index db1ef29438e16c..cd45145cde686a 100644 --- a/Documentation/admin-guide/media/visl.rst +++ b/Documentation/admin-guide/media/visl.rst @@ -49,6 +49,10 @@ Module parameters visl_dprintk_frame_start, visl_dprintk_nframes, but controls the dumping of buffer data through debugfs instead. +- tpg_verbose: Write extra information on each output frame to ease debugging + the API. When set to true, the output frames are not stable for a given input + as some information like pointers or queue status will be added to them. + What is the default use case for this driver? --------------------------------------------- @@ -57,8 +61,12 @@ This assumes that a working client is run against visl and that the ftrace and OUTPUT buffer data is subsequently used to debug a work-in-progress implementation. -Information on reference frames, their timestamps, the status of the OUTPUT and -CAPTURE queues and more can be read directly from the CAPTURE buffers. +Even though no video decoding is actually done, the output frames can be used +against a reference for a given input, except if tpg_verbose is set to true. + +Depending on the tpg_verbose parameter value, information on reference frames, +their timestamps, the status of the OUTPUT and CAPTURE queues and more can be +read directly from the CAPTURE buffers. Supported codecs ---------------- diff --git a/Documentation/admin-guide/media/vivid.rst b/Documentation/admin-guide/media/vivid.rst index 58ac25b2c385c4..b6f658c0997ec3 100644 --- a/Documentation/admin-guide/media/vivid.rst +++ b/Documentation/admin-guide/media/vivid.rst @@ -60,7 +60,7 @@ all configurable using the following module options: - node_types: which devices should each driver instance create. An array of - hexadecimal values, one for each instance. The default is 0x1d3d. + hexadecimal values, one for each instance. The default is 0xe1d3d. Each value is a bitmask with the following meaning: - bit 0: Video Capture node diff --git a/Documentation/admin-guide/mm/damon/reclaim.rst b/Documentation/admin-guide/mm/damon/reclaim.rst index 343e25b252f430..af05ae6170184f 100644 --- a/Documentation/admin-guide/mm/damon/reclaim.rst +++ b/Documentation/admin-guide/mm/damon/reclaim.rst @@ -117,6 +117,33 @@ milliseconds. 1 second by default. +quota_mem_pressure_us +--------------------- + +Desired level of memory pressure-stall time in microseconds. + +While keeping the caps that set by other quotas, DAMON_RECLAIM automatically +increases and decreases the effective level of the quota aiming this level of +memory pressure is incurred. System-wide ``some`` memory PSI in microseconds +per quota reset interval (``quota_reset_interval_ms``) is collected and +compared to this value to see if the aim is satisfied. Value zero means +disabling this auto-tuning feature. + +Disabled by default. + +quota_autotune_feedback +----------------------- + +User-specifiable feedback for auto-tuning of the effective quota. + +While keeping the caps that set by other quotas, DAMON_RECLAIM automatically +increases and decreases the effective level of the quota aiming receiving this +feedback of value ``10,000`` from the user. DAMON_RECLAIM assumes the feedback +value and the quota are positively proportional. Value zero means disabling +this auto-tuning feature. + +Disabled by default. + wmarks_interval --------------- diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst index 9d23144bf98501..6fce035fdbf5c7 100644 --- a/Documentation/admin-guide/mm/damon/usage.rst +++ b/Documentation/admin-guide/mm/damon/usage.rst @@ -83,10 +83,10 @@ comma (","). │ │ │ │ │ │ │ │ sz/min,max │ │ │ │ │ │ │ │ nr_accesses/min,max │ │ │ │ │ │ │ │ age/min,max - │ │ │ │ │ │ │ :ref:`quotas <sysfs_quotas>`/ms,bytes,reset_interval_ms + │ │ │ │ │ │ │ :ref:`quotas <sysfs_quotas>`/ms,bytes,reset_interval_ms,effective_bytes │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil │ │ │ │ │ │ │ │ :ref:`goals <sysfs_schemes_quota_goals>`/nr_goals - │ │ │ │ │ │ │ │ │ 0/target_value,current_value + │ │ │ │ │ │ │ │ │ 0/target_metric,target_value,current_value │ │ │ │ │ │ │ :ref:`watermarks <sysfs_watermarks>`/metric,interval_us,high,mid,low │ │ │ │ │ │ │ :ref:`filters <sysfs_filters>`/nr_filters │ │ │ │ │ │ │ │ 0/type,matching,memcg_id @@ -153,6 +153,9 @@ Users can write below commands for the kdamond to the ``state`` file. - ``clear_schemes_tried_regions``: Clear the DAMON-based operating scheme action tried regions directory for each DAMON-based operation scheme of the kdamond. +- ``update_schemes_effective_bytes``: Update the contents of + ``effective_bytes`` files for each DAMON-based operation scheme of the + kdamond. For more details, refer to :ref:`quotas directory <sysfs_quotas>`. If the state is ``on``, reading ``pid`` shows the pid of the kdamond thread. @@ -180,19 +183,14 @@ In each context directory, two files (``avail_operations`` and ``operations``) and three directories (``monitoring_attrs``, ``targets``, and ``schemes``) exist. -DAMON supports multiple types of monitoring operations, including those for -virtual address space and the physical address space. You can get the list of -available monitoring operations set on the currently running kernel by reading +DAMON supports multiple types of :ref:`monitoring operations +<damon_design_configurable_operations_set>`, including those for virtual address +space and the physical address space. You can get the list of available +monitoring operations set on the currently running kernel by reading ``avail_operations`` file. Based on the kernel configuration, the file will -list some or all of below keywords. - - - vaddr: Monitor virtual address spaces of specific processes - - fvaddr: Monitor fixed virtual address ranges - - paddr: Monitor the physical address space of the system - -Please refer to :ref:`regions sysfs directory <sysfs_regions>` for detailed -differences between the operations sets in terms of the monitoring target -regions. +list different available operation sets. Please refer to the :ref:`design +<damon_operations_set>` for the list of all available operation sets and their +brief explanations. You can set and get what type of monitoring operations DAMON will use for the context by writing one of the keywords listed in ``avail_operations`` file and @@ -247,17 +245,11 @@ process to the ``pid_target`` file. targets/<N>/regions ------------------- -When ``vaddr`` monitoring operations set is being used (``vaddr`` is written to -the ``contexts/<N>/operations`` file), DAMON automatically sets and updates the -monitoring target regions so that entire memory mappings of target processes -can be covered. However, users could want to set the initial monitoring region -to specific address ranges. - -In contrast, DAMON do not automatically sets and updates the monitoring target -regions when ``fvaddr`` or ``paddr`` monitoring operations sets are being used -(``fvaddr`` or ``paddr`` have written to the ``contexts/<N>/operations``). -Therefore, users should set the monitoring target regions by themselves in the -cases. +In case of ``fvaddr`` or ``paddr`` monitoring operations sets, users are +required to set the monitoring target address ranges. In case of ``vaddr`` +operations set, it is not mandatory, but users can optionally set the initial +monitoring region to specific address ranges. Please refer to the :ref:`design +<damon_design_vaddr_target_regions_construction>` for more details. For such cases, users can explicitly set the initial monitoring target regions as they want, by writing proper values to the files under this directory. @@ -302,27 +294,8 @@ In each scheme directory, five directories (``access_pattern``, ``quotas``, The ``action`` file is for setting and getting the scheme's :ref:`action <damon_design_damos_action>`. The keywords that can be written to and read -from the file and their meaning are as below. - -Note that support of each action depends on the running DAMON operations set -:ref:`implementation <sysfs_context>`. - - - ``willneed``: Call ``madvise()`` for the region with ``MADV_WILLNEED``. - Supported by ``vaddr`` and ``fvaddr`` operations set. - - ``cold``: Call ``madvise()`` for the region with ``MADV_COLD``. - Supported by ``vaddr`` and ``fvaddr`` operations set. - - ``pageout``: Call ``madvise()`` for the region with ``MADV_PAGEOUT``. - Supported by ``vaddr``, ``fvaddr`` and ``paddr`` operations set. - - ``hugepage``: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``. - Supported by ``vaddr`` and ``fvaddr`` operations set. - - ``nohugepage``: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``. - Supported by ``vaddr`` and ``fvaddr`` operations set. - - ``lru_prio``: Prioritize the region on its LRU lists. - Supported by ``paddr`` operations set. - - ``lru_deprio``: Deprioritize the region on its LRU lists. - Supported by ``paddr`` operations set. - - ``stat``: Do nothing but count the statistics. - Supported by all operations sets. +from the file and their meaning are same to those of the list on +:ref:`design doc <damon_design_damos_action>`. The ``apply_interval_us`` file is for setting and getting the scheme's :ref:`apply_interval <damon_design_damos>` in microseconds. @@ -350,8 +323,9 @@ schemes/<N>/quotas/ The directory for the :ref:`quotas <damon_design_damos_quotas>` of the given DAMON-based operation scheme. -Under ``quotas`` directory, three files (``ms``, ``bytes``, -``reset_interval_ms``) and two directores (``weights`` and ``goals``) exist. +Under ``quotas`` directory, four files (``ms``, ``bytes``, +``reset_interval_ms``, ``effective_bytes``) and two directores (``weights`` and +``goals``) exist. You can set the ``time quota`` in milliseconds, ``size quota`` in bytes, and ``reset interval`` in milliseconds by writing the values to the three files, @@ -359,7 +333,17 @@ respectively. Then, DAMON tries to use only up to ``time quota`` milliseconds for applying the ``action`` to memory regions of the ``access_pattern``, and to apply the action to only up to ``bytes`` bytes of memory regions within the ``reset_interval_ms``. Setting both ``ms`` and ``bytes`` zero disables the -quota limits. +quota limits unless at least one :ref:`goal <sysfs_schemes_quota_goals>` is +set. + +The time quota is internally transformed to a size quota. Between the +transformed size quota and user-specified size quota, smaller one is applied. +Based on the user-specified :ref:`goal <sysfs_schemes_quota_goals>`, the +effective size quota is further adjusted. Reading ``effective_bytes`` returns +the current effective size quota. The file is not updated in real time, so +users should ask DAMON sysfs interface to update the content of the file for +the stats by writing a special keyword, ``update_schemes_effective_bytes`` to +the relevant ``kdamonds/<N>/state`` file. Under ``weights`` directory, three files (``sz_permil``, ``nr_accesses_permil``, and ``age_permil``) exist. @@ -382,11 +366,11 @@ number (``N``) to the file creates the number of child directories named ``0`` to ``N-1``. Each directory represents each goal and current achievement. Among the multiple feedback, the best one is used. -Each goal directory contains two files, namely ``target_value`` and -``current_value``. Users can set and get any number to those files to set the -feedback. User space main workload's latency or throughput, system metrics -like free memory ratio or memory pressure stall time (PSI) could be example -metrics for the values. Note that users should write +Each goal directory contains three files, namely ``target_metric``, +``target_value`` and ``current_value``. Users can set and get the three +parameters for the quota auto-tuning goals that specified on the :ref:`design +doc <damon_design_damos_quotas_auto_tuning>` by writing to and reading from each +of the files. Note that users should further write ``commit_schemes_quota_goals`` to the ``state`` file of the :ref:`kdamond directory <sysfs_kdamond>` to pass the feedback to DAMON. @@ -579,11 +563,11 @@ monitoring results recording. While the monitoring is turned on, you could record the tracepoint events and show results using tracepoint supporting tools like ``perf``. For example:: - # echo on > monitor_on + # echo on > kdamonds/0/state # perf record -e damon:damon_aggregated & # sleep 5 # kill 9 $(pidof perf) - # echo off > monitor_on + # echo off > kdamonds/0/state # perf script kdamond.0 46568 [027] 79357.842179: damon:damon_aggregated: target_id=0 nr_regions=11 122509119488-135708762112: 0 864 [...] @@ -628,9 +612,17 @@ debugfs Interface (DEPRECATED!) move, please report your usecase to damon@lists.linux.dev and linux-mm@kvack.org. -DAMON exports eight files, ``attrs``, ``target_ids``, ``init_regions``, -``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` and -``rm_contexts`` under its debugfs directory, ``<debugfs>/damon/``. +DAMON exports nine files, ``DEPRECATED``, ``attrs``, ``target_ids``, +``init_regions``, ``schemes``, ``monitor_on_DEPRECATED``, ``kdamond_pid``, +``mk_contexts`` and ``rm_contexts`` under its debugfs directory, +``<debugfs>/damon/``. + + +``DEPRECATED`` is a read-only file for the DAMON debugfs interface deprecation +notice. Reading it returns the deprecation notice, as below:: + + # cat DEPRECATED + DAMON debugfs interface is deprecated, so users should move to DAMON_SYSFS. If you cannot, please report your usecase to damon@lists.linux.dev and linux-mm@kvack.org. Attributes @@ -755,19 +747,17 @@ Action ~~~~~~ The ``<action>`` is a predefined integer for memory management :ref:`actions -<damon_design_damos_action>`. The supported numbers and their meanings are as -below. - - - 0: Call ``madvise()`` for the region with ``MADV_WILLNEED``. Ignored if - ``target`` is ``paddr``. - - 1: Call ``madvise()`` for the region with ``MADV_COLD``. Ignored if - ``target`` is ``paddr``. - - 2: Call ``madvise()`` for the region with ``MADV_PAGEOUT``. - - 3: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``. Ignored if - ``target`` is ``paddr``. - - 4: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``. Ignored if - ``target`` is ``paddr``. - - 5: Do nothing but count the statistics +<damon_design_damos_action>`. The mapping between the ``<action>`` values and +the memory management actions is as below. For the detailed meaning of the +action and DAMON operations set supporting each action, please refer to the +list on :ref:`design doc <damon_design_damos_action>`. + + - 0: ``willneed`` + - 1: ``cold`` + - 2: ``pageout`` + - 3: ``hugepage`` + - 4: ``nohugepage`` + - 5: ``stat`` Quota ~~~~~ @@ -848,16 +838,16 @@ Turning On/Off Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the -monitoring by writing to and reading from the ``monitor_on`` file. Writing -``on`` to the file starts the monitoring of the targets with the attributes. -Writing ``off`` to the file stops those. DAMON also stops if every target -process is terminated. Below example commands turn on, off, and check the -status of DAMON:: +monitoring by writing to and reading from the ``monitor_on_DEPRECATED`` file. +Writing ``on`` to the file starts the monitoring of the targets with the +attributes. Writing ``off`` to the file stops those. DAMON also stops if +every target process is terminated. Below example commands turn on, off, and +check the status of DAMON:: # cd <debugfs>/damon - # echo on > monitor_on - # echo off > monitor_on - # cat monitor_on + # echo on > monitor_on_DEPRECATED + # echo off > monitor_on_DEPRECATED + # cat monitor_on_DEPRECATED off Please note that you cannot write to the above-mentioned debugfs files while @@ -873,11 +863,11 @@ can get the pid of the thread by reading the ``kdamond_pid`` file. When the monitoring is turned off, reading the file returns ``none``. :: # cd <debugfs>/damon - # cat monitor_on + # cat monitor_on_DEPRECATED off # cat kdamond_pid none - # echo on > monitor_on + # echo on > monitor_on_DEPRECATED # cat kdamond_pid 18594 @@ -907,5 +897,5 @@ directory by putting the name of the context to the ``rm_contexts`` file. :: # ls foo # ls: cannot access 'foo': No such file or directory -Note that ``mk_contexts``, ``rm_contexts``, and ``monitor_on`` files are in the -root directory only. +Note that ``mk_contexts``, ``rm_contexts``, and ``monitor_on_DEPRECATED`` files +are in the root directory only. diff --git a/Documentation/admin-guide/mm/numa_memory_policy.rst b/Documentation/admin-guide/mm/numa_memory_policy.rst index eca38fa81e0f98..a70f20ce1ffb4f 100644 --- a/Documentation/admin-guide/mm/numa_memory_policy.rst +++ b/Documentation/admin-guide/mm/numa_memory_policy.rst @@ -250,6 +250,15 @@ MPOL_PREFERRED_MANY can fall back to all existing numa nodes. This is effectively MPOL_PREFERRED allowed for a mask rather than a single node. +MPOL_WEIGHTED_INTERLEAVE + This mode operates the same as MPOL_INTERLEAVE, except that + interleaving behavior is executed based on weights set in + /sys/kernel/mm/mempolicy/weighted_interleave/ + + Weighted interleave allocates pages on nodes according to a + weight. For example if nodes [0,1] are weighted [5,2], 5 pages + will be allocated on node0 for every 2 pages allocated on node1. + NUMA memory policy supports the following optional mode flags: MPOL_F_STATIC_NODES diff --git a/Documentation/admin-guide/perf/hisi-pcie-pmu.rst b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst index 7e863662e2d425..5541ff40e06a88 100644 --- a/Documentation/admin-guide/perf/hisi-pcie-pmu.rst +++ b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst @@ -37,9 +37,21 @@ Example usage of perf:: hisi_pcie0_core0/rx_mwr_cnt/ [kernel PMU event] ------------------------------------------ - $# perf stat -e hisi_pcie0_core0/rx_mwr_latency/ - $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt/ - $# perf stat -g -e hisi_pcie0_core0/rx_mwr_latency/ -e hisi_pcie0_core0/rx_mwr_cnt/ + $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0xffff/ + $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt,port=0xffff/ + +The related events usually used to calculate the bandwidth, latency or others. +They need to start and end counting at the same time, therefore related events +are best used in the same event group to get the expected value. There are two +ways to know if they are related events: + +a) By event name, such as the latency events "xxx_latency, xxx_cnt" or + bandwidth events "xxx_flux, xxx_time". +b) By event type, such as "event=0xXXXX, event=0x1XXXX". + +Example usage of perf group:: + + $# perf stat -e "{hisi_pcie0_core0/rx_mwr_latency,port=0xffff/,hisi_pcie0_core0/rx_mwr_cnt,port=0xffff/}" The current driver does not support sampling. So "perf record" is unsupported. Also attach to a task is unsupported for PCIe PMU. @@ -51,8 +63,12 @@ Filter options PMU could only monitor the performance of traffic downstream target Root Ports or downstream target Endpoint. PCIe PMU driver support "port" and - "bdf" interfaces for users, and these two interfaces aren't supported at the - same time. + "bdf" interfaces for users. + Please notice that, one of these two interfaces must be set, and these two + interfaces aren't supported at the same time. If they are both set, only + "port" filter is valid. + If "port" filter not being set or is set explicitly to zero (default), the + "bdf" filter will be in effect, because "bdf=0" meaning 0000:000:00.0. - port @@ -95,7 +111,7 @@ Filter options Example usage of perf:: - $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,port=0xffff,trig_len=0x4,trig_mode=1/ sleep 5 3. Threshold filter @@ -109,7 +125,7 @@ Filter options Example usage of perf:: - $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,port=0xffff,thr_len=0x4,thr_mode=1/ sleep 5 4. TLP Length filter @@ -127,4 +143,4 @@ Filter options Example usage of perf:: - $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,len_mode=0x1/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,port=0xffff,len_mode=0x1/ sleep 5 diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst index f4a4513c526f05..7eb3dcd6f4da67 100644 --- a/Documentation/admin-guide/perf/index.rst +++ b/Documentation/admin-guide/perf/index.rst @@ -13,6 +13,7 @@ Performance monitor support imx-ddr qcom_l2_pmu qcom_l3_pmu + starfive_starlink_pmu arm-ccn arm-cmn xgene-pmu diff --git a/Documentation/admin-guide/perf/starfive_starlink_pmu.rst b/Documentation/admin-guide/perf/starfive_starlink_pmu.rst new file mode 100644 index 00000000000000..2932ddb4eb765a --- /dev/null +++ b/Documentation/admin-guide/perf/starfive_starlink_pmu.rst @@ -0,0 +1,46 @@ +================================================ +StarFive StarLink Performance Monitor Unit (PMU) +================================================ + +StarFive StarLink Performance Monitor Unit (PMU) exists within the +StarLink Coherent Network on Chip (CNoC) that connects multiple CPU +clusters with an L3 memory system. + +The uncore PMU supports overflow interrupt, up to 16 programmable 64bit +event counters, and an independent 64bit cycle counter. +The PMU can only be accessed via Memory Mapped I/O and are common to the +cores connected to the same PMU. + +Driver exposes supported PMU events in sysfs "events" directory under:: + + /sys/bus/event_source/devices/starfive_starlink_pmu/events/ + +Driver exposes cpu used to handle PMU events in sysfs "cpumask" directory +under:: + + /sys/bus/event_source/devices/starfive_starlink_pmu/cpumask/ + +Driver describes the format of config (event ID) in sysfs "format" directory +under:: + + /sys/bus/event_source/devices/starfive_starlink_pmu/format/ + +Example of perf usage:: + + $ perf list + + starfive_starlink_pmu/cycles/ [Kernel PMU event] + starfive_starlink_pmu/read_hit/ [Kernel PMU event] + starfive_starlink_pmu/read_miss/ [Kernel PMU event] + starfive_starlink_pmu/read_request/ [Kernel PMU event] + starfive_starlink_pmu/release_request/ [Kernel PMU event] + starfive_starlink_pmu/write_hit/ [Kernel PMU event] + starfive_starlink_pmu/write_miss/ [Kernel PMU event] + starfive_starlink_pmu/write_request/ [Kernel PMU event] + starfive_starlink_pmu/writeback/ [Kernel PMU event] + + + $ perf stat -a -e /starfive_starlink_pmu/cycles/ sleep 1 + +Sampling is not supported. As a result, "perf record" is not supported. +Attaching to a task is not supported, only system-wide counting is supported. diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst index 9eb26014d34b6c..1e0d101b020a08 100644 --- a/Documentation/admin-guide/pm/amd-pstate.rst +++ b/Documentation/admin-guide/pm/amd-pstate.rst @@ -300,8 +300,8 @@ platforms. The AMD P-States mechanism is the more performance and energy efficiency frequency management method on AMD processors. -AMD Pstate Driver Operation Modes -================================= +``amd-pstate`` Driver Operation Modes +====================================== ``amd_pstate`` CPPC has 3 operation modes: autonomous (active) mode, non-autonomous (passive) mode and guided autonomous (guided) mode. @@ -353,6 +353,48 @@ is activated. In this mode, driver requests minimum and maximum performance level and the platform autonomously selects a performance level in this range and appropriate to the current workload. +``amd-pstate`` Preferred Core +================================= + +The core frequency is subjected to the process variation in semiconductors. +Not all cores are able to reach the maximum frequency respecting the +infrastructure limits. Consequently, AMD has redefined the concept of +maximum frequency of a part. This means that a fraction of cores can reach +maximum frequency. To find the best process scheduling policy for a given +scenario, OS needs to know the core ordering informed by the platform through +highest performance capability register of the CPPC interface. + +``amd-pstate`` preferred core enables the scheduler to prefer scheduling on +cores that can achieve a higher frequency with lower voltage. The preferred +core rankings can dynamically change based on the workload, platform conditions, +thermals and ageing. + +The priority metric will be initialized by the ``amd-pstate`` driver. The ``amd-pstate`` +driver will also determine whether or not ``amd-pstate`` preferred core is +supported by the platform. + +``amd-pstate`` driver will provide an initial core ordering when the system boots. +The platform uses the CPPC interfaces to communicate the core ranking to the +operating system and scheduler to make sure that OS is choosing the cores +with highest performance firstly for scheduling the process. When ``amd-pstate`` +driver receives a message with the highest performance change, it will +update the core ranking and set the cpu's priority. + +``amd-pstate`` Preferred Core Switch +===================================== +Kernel Parameters +----------------- + +``amd-pstate`` peferred core`` has two states: enable and disable. +Enable/disable states can be chosen by different kernel parameters. +Default enable ``amd-pstate`` preferred core. + +``amd_prefcore=disable`` + +For systems that support ``amd-pstate`` preferred core, the core rankings will +always be advertised by the platform. But OS can choose to ignore that via the +kernel parameter ``amd_prefcore=disable``. + User Space Interface in ``sysfs`` - General =========================================== @@ -385,6 +427,19 @@ control its functionality at the system level. They are located in the to the operation mode represented by that string - or to be unregistered in the "disable" case. +``prefcore`` + Preferred core state of the driver: "enabled" or "disabled". + + "enabled" + Enable the ``amd-pstate`` preferred core. + + "disabled" + Disable the ``amd-pstate`` preferred core + + + This attribute is read-only to check the state of preferred core set + by the kernel parameter. + ``cpupower`` tool support for ``amd-pstate`` =============================================== diff --git a/Documentation/admin-guide/reporting-regressions.rst b/Documentation/admin-guide/reporting-regressions.rst index d8adccdae23f50..76b246ecf21b51 100644 --- a/Documentation/admin-guide/reporting-regressions.rst +++ b/Documentation/admin-guide/reporting-regressions.rst @@ -31,7 +31,7 @@ The important bits (aka "TL;DR") Linux kernel regression tracking bot "regzbot" track the issue by specifying when the regression started like this:: - #regzbot introduced v5.13..v5.14-rc1 + #regzbot introduced: v5.13..v5.14-rc1 All the details on Linux kernel regressions relevant for users diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index 6584a1f9bfe39d..7fd43947832f8f 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -296,12 +296,30 @@ kernel panic). This will output the contents of the ftrace buffers to the console. This is very useful for capturing traces that lead to crashes and outputting them to a serial console. -= =================================================== -0 Disabled (default). -1 Dump buffers of all CPUs. -2 Dump the buffer of the CPU that triggered the oops. -= =================================================== +======================= =========================================== +0 Disabled (default). +1 Dump buffers of all CPUs. +2(orig_cpu) Dump the buffer of the CPU that triggered the + oops. +<instance> Dump the specific instance buffer on all CPUs. +<instance>=2(orig_cpu) Dump the specific instance buffer on the CPU + that triggered the oops. +======================= =========================================== +Multiple instance dump is also supported, and instances are separated +by commas. If global buffer also needs to be dumped, please specify +the dump mode (1/2/orig_cpu) first for global buffer. + +So for example to dump "foo" and "bar" instance buffer on all CPUs, +user can:: + + echo "foo,bar" > /proc/sys/kernel/ftrace_dump_on_oops + +To dump global buffer and "foo" instance buffer on all +CPUs along with the "bar" instance buffer on CPU that triggered the +oops, user can:: + + echo "1,foo,bar=2" > /proc/sys/kernel/ftrace_dump_on_oops ftrace_enabled, stack_tracer_enabled ==================================== @@ -594,6 +612,9 @@ default (``MSGMNB``). ``msgmni`` is the maximum number of IPC queues. 32000 by default (``MSGMNI``). +All of these parameters are set per ipc namespace. The maximum number of bytes +in POSIX message queues is limited by ``RLIMIT_MSGQUEUE``. This limit is +respected hierarchically in the each user namespace. msg_next_id, sem_next_id, and shm_next_id (System V IPC) ======================================================== @@ -850,6 +871,7 @@ bit 3 print locks info if ``CONFIG_LOCKDEP`` is on bit 4 print ftrace buffer bit 5 print all printk messages in buffer bit 6 print all CPUs backtrace (if available in the arch) +bit 7 print only tasks in uninterruptible (blocked) state ===== ============================================ So for example to print tasks and memory info on panic, user can:: @@ -1274,15 +1296,20 @@ are doing anyway :) shmall ====== -This parameter sets the total amount of shared memory pages that -can be used system wide. Hence, ``shmall`` should always be at least -``ceil(shmmax/PAGE_SIZE)``. +This parameter sets the total amount of shared memory pages that can be used +inside ipc namespace. The shared memory pages counting occurs for each ipc +namespace separately and is not inherited. Hence, ``shmall`` should always be at +least ``ceil(shmmax/PAGE_SIZE)``. If you are not sure what the default ``PAGE_SIZE`` is on your Linux system, you can run the following command:: # getconf PAGE_SIZE +To reduce or disable the ability to allocate shared memory, you must create a +new ipc namespace, set this parameter to the required value and prohibit the +creation of a new ipc namespace in the current user namespace or cgroups can +be used. shmmax ====== diff --git a/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst b/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst index 58211840ac6ffb..d3504826f40154 100644 --- a/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst +++ b/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst @@ -39,13 +39,13 @@ aspects, all of which might be essential in your present case.]* developers**, execute just the *preparations* and *segment 1*; while doing so, consider the newest Linux kernel you regularly use to be the 'working' kernel. In the following example that's assumed to be 6.0.13, which is why the sources -of v6.0 will be used to prepare the .config file. +of 6.0 will be used to prepare the .config file. **In case you face a regression**, follow the steps at least till the end of *segment 2*. Then you can submit a preliminary report -- or continue with *segment 3*, which describes how to perform a bisection needed for a full-fledged regression report. In the following example 6.0.13 is assumed to be -the 'working' kernel and 6.1.5 to be the first 'broken', which is why v6.0 +the 'working' kernel and 6.1.5 to be the first 'broken', which is why 6.0 will be considered the 'good' release and used to prepare the .config file. * **Preparations**: set up everything to build your own kernels:: @@ -99,7 +99,8 @@ will be considered the 'good' release and used to prepare the .config file. # * Note: on Arch Linux, its derivatives and a few other distributions # the following commands will do nothing at all or only part of the # job. See the step-by-step guide for further details. - command -v installkernel && sudo make modules_install install + sudo make modules_install + command -v installkernel && sudo make install # * Check how much space your self-built kernel actually needs, which # enables you to make better estimates later: du -ch /boot/*$(make -s kernelrelease)* | tail -n 1 @@ -112,6 +113,7 @@ will be considered the 'good' release and used to prepare the .config file. # checking if the output of the next two commands matches: tail -n 1 ~/kernels-built uname -r + cat /proc/sys/kernel/tainted c) Check if the problem occurs with this kernel as well. @@ -230,9 +232,10 @@ developers are obliged to act upon. :ref:`Supplementary tasks: cleanup during and after following this guide.<introclosure_bissbs>` The steps in each segment illustrate the important aspects of the process, while -a comprehensive reference section holds additional details. The latter sometimes -also outlines alternative approaches, pitfalls, as well as problems that might -occur at the particular step -- and how to get things rolling again. +a comprehensive reference section holds additional details for almost all of the +steps. The reference section sometimes also outlines alternative approaches, +pitfalls, as well as problems that might occur at the particular step -- and how +to get things rolling again. For further details on how to report Linux kernel issues or regressions check out Documentation/admin-guide/reporting-issues.rst, which works in conjunction @@ -283,23 +286,23 @@ Preparations: set up everything to build your own kernels Do you follow this guide to verify if a bug is present in the code developers care for? Then consider the mainline release your 'working' kernel (the newest one you regularly use) is based on to be the 'good' version; if your 'working' - kernel for example is '6.0.11', then your 'good' kernel is 'v6.0'. + kernel for example is 6.0.11, then your 'good' kernel is 6.0. In case you face a regression, it depends on the version range where the regression was introduced: * Something which used to work in Linux 6.0 broke when switching to Linux - 6.1-rc1? Then henceforth regard 'v6.0' as the last known 'good' version - and 'v6.1-rc1' as the first 'bad' one. + 6.1-rc1? Then henceforth regard 6.0 as the last known 'good' version + and 6.1-rc1 as the first 'bad' one. * Some function stopped working when updating from 6.0.11 to 6.1.4? Then for - the time being consider 'v6.0' as the last 'good' version and 'v6.1.4' as + the time being consider 6.0 as the last 'good' version and 6.1.4 as the 'bad' one. Note, at this point it is merely assumed that 6.0 is fine; this assumption will be checked in segment 2. * A feature you used in 6.0.11 does not work at all or worse in 6.1.13? In that case you want to bisect within a stable/longterm series: consider - 'v6.0.11' as the last known 'good' version and 'v6.0.13' as the first 'bad' + 6.0.11 as the last known 'good' version and 6.0.13 as the first 'bad' one. Note, in this case you still want to compile and test a mainline kernel as explained in segment 1: the outcome will determine if you need to report your issue to the regular developers or the stable team. @@ -349,7 +352,7 @@ Preparations: set up everything to build your own kernels internet connections.* Execute the following command to retrieve a fresh mainline codebase while - preparing things to add stable/longterm branches later:: + preparing things to add branches for stable/longterm series later:: git clone -o mainline --no-checkout \ https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git ~/linux/ @@ -368,14 +371,19 @@ Preparations: set up everything to build your own kernels identifier using ``uname -r``. Afterwards check out the source code for the version earlier established as - 'good' (in this example this is assumed to be 6.0) and create a .config file:: + 'good'. In the following example command this is assumed to be 6.0; note that + the version number in this and all later Git commands needs to be prefixed + with a 'v':: git checkout --detach v6.0 + + Now create a build configuration file:: + make olddefconfig - The second command will try to locate the build configuration file for the - running kernel and then adjust it for the needs of the kernel sources you - checked out. While doing so, it will print a few lines you need to check. + The kernel build scripts then will try to locate the build configuration file + for the running kernel and then adjust it for the needs of the kernel sources + you checked out. While doing so, it will print a few lines you need to check. Look out for a line starting with '# using defaults found in'. It should be followed by a path to a file in '/boot/' that contains the release identifier @@ -520,44 +528,32 @@ be a waste of time. [:ref:`details<introlatestcheck_bisref>`] * Install your newly built kernel. - Before doing so, consider checking if there is still enough room for it:: + Before doing so, consider checking if there is still enough space for it:: df -h /boot/ /lib/modules/ - 150 MByte in /boot/ and 200 in /lib/modules/ usually suffice. Those are rough - estimates assuming the worst case. How much your kernels actually require will - be determined later. - - Now install the kernel, which will be saved in parallel to the kernels from - your Linux distribution:: - - command -v installkernel && sudo make modules_install install + For now assume 150 MByte in /boot/ and 200 in /lib/modules/ will suffice; how + much your kernels actually require will be determined later during this guide. - On many commodity Linux distributions this will take care of everything - required to boot your kernel. You might want to ensure that's the case by - checking if your boot loader's configuration was updated; furthermore ensure - an initramfs (also known as initrd) exists, which on many distributions can be - achieved by running ``ls -l /boot/init*$(make -s kernelrelease)*``. Those - steps are recommended, as there are quite a few Linux distribution where above - command is insufficient: + Now install the kernel's modules and its image, which will be stored in + parallel to the your Linux distribution's kernels:: - * On Arch Linux, its derivatives, many immutable Linux distributions, and a - few others the above command does nothing at, as they lack 'installkernel' - executable. + sudo make modules_install + command -v installkernel && sudo make install - * Some distributions install the kernel, but don't add an entry for your - kernel in your boot loader's configuration -- the kernel thus won't show up - in the boot menu. + The second command ideally will take care of three steps required at this + point: copying the kernel's image to /boot/, generating an initramfs, and + adding an entry for both to the boot loader's configuration. - * Some distributions add a boot loader menu entry, but don't create an - initramfs on installation -- in that case your kernel most likely will be - unable to mount the root partition during bootup. + Sadly some distributions (among them Arch Linux, its derivatives, and many + immutable Linux distributions) will perform none or only some of those tasks. + You therefore want to check if all of them were taken care of and manually + perform those that were not. The reference section provides further details on + that; your distribution's documentation might help, too. - If any of that applies to you, see the reference section for further guidance. - Once you figured out what to do, consider writing down the necessary - installation steps: if you will build more kernels as described in - segment 2 and 3, you will have to execute these commands every time that - ``command -v installkernel [...]`` comes up again. + Once you figured out the steps needed at this point, consider writing them + down: if you will build more kernels as described in segment 2 and 3, you will + have to perform those again after executing ``command -v installkernel [...]``. [:ref:`details<install_bisref>`] @@ -583,31 +579,40 @@ be a waste of time. [:ref:`details<introlatestcheck_bisref>`] Remember the identifier momentarily, as it will help you pick the right kernel from the boot menu upon restarting. -.. _recheckbroken_bissbs: - -* Reboot into the kernel you just built and check if the feature that is - expected to be broken really is. - - Start by making sure the kernel you booted is the one you just built. When - unsure, check if the output of these commands show the exact same release - identifier:: +* Reboot into your newly built kernel. To ensure your actually started the one + you just built, you might want to verify if the output of these commands + matches:: tail -n 1 ~/kernels-built uname -r - Now verify if the feature that causes trouble works with your newly built - kernel. If things work while investigating a regression, check the reference - section for further details. +.. _tainted_bissbs: + +* Check if the kernel marked itself as 'tainted':: + + cat /proc/sys/kernel/tainted + + If that command does not return '0', check the reference section, as the cause + for this might interfere with your testing. + + [:ref:`details<tainted_bisref>`] + +.. _recheckbroken_bissbs: + +* Verify if your bug occurs with the newly built kernel. If it does not, check + out the instructions in the reference section to ensure nothing went sideways + during your tests. [:ref:`details<recheckbroken_bisref>`] .. _recheckstablebroken_bissbs: -* Are you facing a problem within a stable/longterm release, but failed to - reproduce it with the mainline kernel you just built? Then check if the latest - codebase for the particular series might already fix the problem. To do so, - add the stable series Git branch for your 'good' kernel (again, this here is - assumed to be 6.0) and check out the latest version:: +* Are you facing a problem within a stable/longterm series, but failed to + reproduce it with the mainline kernel you just built? One that according to + the `front page of kernel.org <https://kernel.org/>`_ is still supported? Then + check if the latest codebase for the particular series might already fix the + problem. To do so, add the stable series Git branch for your 'good' kernel + (again, this here is assumed to be 6.0) and check out the latest version:: cd ~/linux/ git remote set-branches --add stable linux-6.0.y @@ -622,22 +627,26 @@ be a waste of time. [:ref:`details<introlatestcheck_bisref>`] make -j $(nproc --all) # * Check if the free space suffices holding another kernel: df -h /boot/ /lib/modules/ - command -v installkernel && sudo make modules_install install + sudo make modules_install + command -v installkernel && sudo make install make -s kernelrelease | tee -a ~/kernels-built reboot - Now verify if you booted the kernel you intended to start, to then check if - everything works fine with this kernel:: + Confirm you booted the kernel you intended to start and check its tainted + status:: tail -n 1 ~/kernels-built uname -r + cat /proc/sys/kernel/tainted + + Now verify if this kernel is showing the problem. [:ref:`details<recheckstablebroken_bisref>`] Do you follow this guide to verify if a problem is present in the code currently supported by Linux kernel developers? Then you are done at this point. If you later want to remove the kernel you just built, check out -:ref:`Supplementary tasks: cleanup during and after following this guide.<introclosure_bissbs>`. +:ref:`Supplementary tasks: cleanup during and after following this guide<introclosure_bissbs>`. In case you face a regression, move on and execute at least the next segment as well. @@ -670,12 +679,13 @@ otherwise would be a waste of time. [:ref:`details<introworkingcheck_bisref>`] make -j $(nproc --all) # * Check if the free space suffices holding another kernel: df -h /boot/ /lib/modules/ - command -v installkernel && sudo make modules_install install + sudo make modules_install + command -v installkernel && sudo make install make -s kernelrelease | tee -a ~/kernels-built reboot When the system booted, you may want to verify once again that the - kernel you started is the one you just built: + kernel you started is the one you just built:: tail -n 1 ~/kernels-built uname -r @@ -698,7 +708,7 @@ configuration created earlier this works a lot faster than many people assume: overall on average it will often just take about 10 to 15 minutes to compile each kernel on commodity x86 machines. -* In case your 'bad' version is a stable/longterm release (say v6.1.5), add its +* In case your 'bad' version is a stable/longterm release (say 6.1.5), add its stable branch, unless you already did so earlier:: cd ~/linux/ @@ -727,7 +737,8 @@ each kernel on commodity x86 machines. make -j $(nproc --all) # * Check if the free space suffices holding another kernel: df -h /boot/ /lib/modules/ - command -v installkernel && sudo make modules_install install + sudo make modules_install + command -v installkernel && sudo make install make -s kernelrelease | tee -a ~/kernels-built reboot @@ -843,7 +854,8 @@ each kernel on commodity x86 machines. make -j $(nproc --all) && # * Check if the free space suffices holding another kernel: df -h /boot/ /lib/modules/ - command -v installkernel && sudo make modules_install install + sudo make modules_install + command -v installkernel && sudo make install Make -s kernelrelease | tee -a ~/kernels-built reboot @@ -1126,12 +1138,12 @@ Git clone of Linus' mainline repository. There is nothing more to say about that -- but there are two alternatives ways to retrieve the sources that might work better for you: - * If you have an unreliable internet connection, consider - :ref:`using a 'Git bundle'<sources_bundle_bisref>`. +* If you have an unreliable internet connection, consider + :ref:`using a 'Git bundle'<sources_bundle_bisref>`. - * If downloading the complete repository would take too long or requires too - much storage space, consider :ref:`using a 'shallow - clone'<sources_shallow_bisref>`. +* If downloading the complete repository would take too long or requires too + much storage space, consider :ref:`using a 'shallow + clone'<sources_shallow_bisref>`. .. _sources_bundle_bisref: @@ -1183,23 +1195,23 @@ branches as explained in the step-by-step guide. Note, shallow clones have a few peculiar characteristics: - * For bisections the history needs to be deepened a few mainline versions - farther than it seems necessary, as explained above already. That's because - Git otherwise will be unable to revert or describe most of the commits within - a range (say v6.1..v6.2), as they are internally based on earlier kernels - releases (like v6.0-rc2 or 5.19-rc3). +* For bisections the history needs to be deepened a few mainline versions + farther than it seems necessary, as explained above already. That's because + Git otherwise will be unable to revert or describe most of the commits within + a range (say 6.1..6.2), as they are internally based on earlier kernels + releases (like 6.0-rc2 or 5.19-rc3). - * This document in most places uses ``git fetch`` with ``--shallow-exclude=`` - to specify the earliest version you care about (or to be precise: its git - tag). You alternatively can use the parameter ``--shallow-since=`` to specify - an absolute (say ``'2023-07-15'``) or relative (``'12 months'``) date to - define the depth of the history you want to download. When using them while - bisecting mainline, ensure to deepen the history to at least 7 months before - the release of the mainline release your 'good' kernel is based on. +* This document in most places uses ``git fetch`` with ``--shallow-exclude=`` + to specify the earliest version you care about (or to be precise: its git + tag). You alternatively can use the parameter ``--shallow-since=`` to specify + an absolute (say ``'2023-07-15'``) or relative (``'12 months'``) date to + define the depth of the history you want to download. When using them while + bisecting mainline, ensure to deepen the history to at least 7 months before + the release of the mainline release your 'good' kernel is based on. - * Be warned, when deepening your clone you might encounter an error like - 'fatal: error in object: unshallow cafecaca0c0dacafecaca0c0dacafecaca0c0da'. - In that case run ``git repack -d`` and try again. +* Be warned, when deepening your clone you might encounter an error like + 'fatal: error in object: unshallow cafecaca0c0dacafecaca0c0dacafecaca0c0da'. + In that case run ``git repack -d`` and try again. [:ref:`back to step-by-step guide <sources_bissbs>`] [:ref:`back to section intro <sources_bisref>`] @@ -1223,23 +1235,23 @@ locate the right build configuration.* Two things can easily go wrong when creating a .config file as advised: - * The oldconfig target will use a .config file from your build directory, if - one is already present there (e.g. '~/linux/.config'). That's totally fine if - that's what you intend (see next step), but in all other cases you want to - delete it. This for example is important in case you followed this guide - further, but due to problems come back here to redo the configuration from - scratch. +* The oldconfig target will use a .config file from your build directory, if + one is already present there (e.g. '~/linux/.config'). That's totally fine if + that's what you intend (see next step), but in all other cases you want to + delete it. This for example is important in case you followed this guide + further, but due to problems come back here to redo the configuration from + scratch. - * Sometimes olddefconfig is unable to locate the .config file for your running - kernel and will use defaults, as briefly outlined in the guide. In that case - check if your distribution ships the configuration somewhere and manually put - it in the right place (e.g. '~/linux/.config') if it does. On distributions - where /proc/config.gz exists this can be achieved using this command:: +* Sometimes olddefconfig is unable to locate the .config file for your running + kernel and will use defaults, as briefly outlined in the guide. In that case + check if your distribution ships the configuration somewhere and manually put + it in the right place (e.g. '~/linux/.config') if it does. On distributions + where /proc/config.gz exists this can be achieved using this command:: - zcat /proc/config.gz > .config + zcat /proc/config.gz > .config - Once you put it there, run ``make olddefconfig`` again to adjust it to the - needs of the kernel about to be built. + Once you put it there, run ``make olddefconfig`` again to adjust it to the + needs of the kernel about to be built. Note, the olddefconfig target will set any undefined build options to their default value. If you prefer to set such configuration options manually, use @@ -1252,7 +1264,7 @@ restrictions). Occasionally odd things happen when trying to use a config file prepared for one kernel (say 6.1) on an older mainline release -- especially if it is much older -(say v5.15). That's one of the reasons why the previous step in the guide told +(say 5.15). That's one of the reasons why the previous step in the guide told you to boot the kernel where everything works. If you manually add a .config file you thus want to ensure it's from the working kernel and not from a one that shows the regression. @@ -1381,16 +1393,16 @@ when following this guide on a few commodity distributions. **Debian:** - * Remove a stale reference to a certificate file that would cause your build to - fail:: +* Remove a stale reference to a certificate file that would cause your build to + fail:: - ./scripts/config --set-str SYSTEM_TRUSTED_KEYS '' + ./scripts/config --set-str SYSTEM_TRUSTED_KEYS '' - Alternatively, download the needed certificate and make that configuration - option point to it, as `the Debian handbook explains in more detail - <https://debian-handbook.info/browse/stable/sect.kernel-compilation.html>`_ - -- or generate your own, as explained in - Documentation/admin-guide/module-signing.rst. + Alternatively, download the needed certificate and make that configuration + option point to it, as `the Debian handbook explains in more detail + <https://debian-handbook.info/browse/stable/sect.kernel-compilation.html>`_ + -- or generate your own, as explained in + Documentation/admin-guide/module-signing.rst. [:ref:`back to step-by-step guide <configmods_bissbs>`] @@ -1402,12 +1414,12 @@ Individual adjustments *If you want to influence the other aspects of the configuration, do so now.* [:ref:`... <configmods_bissbs>`] -You at this point can use a command like ``make menuconfig`` to enable or -disable certain features using a text-based user interface; to use a graphical -configuration utility, call the make target ``xconfig`` or ``gconfig`` instead. -All of them require development libraries from toolkits they are based on -(ncurses, Qt5, Gtk2); an error message will tell you if something required is -missing. +At this point you can use a command like ``make menuconfig`` or ``make nconfig`` +to enable or disable certain features using a text-based user interface; to use +a graphical configuration utility, run ``make xconfig`` instead. Both of them +require development libraries from toolkits they are rely on (ncurses +respectively Qt5 or Qt6); an error message will tell you if something required +is missing. [:ref:`back to step-by-step guide <configmods_bissbs>`] @@ -1484,10 +1496,10 @@ highly recommended for these reasons: .. _checkoutmaster_bisref: -Checkout the latest Linux codebase ----------------------------------- +Check out the latest Linux codebase +----------------------------------- - *Checkout the latest Linux codebase.* + *Check out the latest Linux codebase.* [:ref:`... <introlatestcheck_bissbs>`] In case you later want to recheck if an ever newer codebase might fix the @@ -1515,7 +1527,7 @@ When a build error occurs, it might be caused by some aspect of your machine's setup that often can be fixed quickly; other times though the problem lies in the code and can only be fixed by a developer. A close examination of the failure messages coupled with some research on the internet will often tell you -which of the two it is. To perform such a investigation, restart the build +which of the two it is. To perform such investigation, restart the build process like this:: make V=1 @@ -1538,10 +1550,10 @@ often one of the hits will provide a solution for your problem, too. If you do not find anything that matches your problem, try again from a different angle by modifying your search terms or using another line from the error messages. -In the end, most trouble you are to run into has likely been encountered and +In the end, most issues you run into have likely been encountered and reported by others already. That includes issues where the cause is not your -system, but lies the code. If you run into one of those, you might thus find a -solution (e.g. a patch) or workaround for your problem, too. +system, but lies in the code. If you run into one of those, you might thus find a +solution (e.g. a patch) or workaround for your issue, too. Package your kernel up ~~~~~~~~~~~~~~~~~~~~~~ @@ -1551,11 +1563,11 @@ The step-by-step guide uses the default make targets (e.g. 'bzImage' and steps of the guide then install. You instead can also directly build everything and directly package it up by using one of the following targets: - * ``make -j $(nproc --all) bindeb-pkg`` to generate a deb package +* ``make -j $(nproc --all) bindeb-pkg`` to generate a deb package - * ``make -j $(nproc --all) binrpm-pkg`` to generate a rpm package +* ``make -j $(nproc --all) binrpm-pkg`` to generate a rpm package - * ``make -j $(nproc --all) tarbz2-pkg`` to generate a bz2 compressed tarball +* ``make -j $(nproc --all) tarbz2-pkg`` to generate a bz2 compressed tarball This is just a selection of available make targets for this purpose, see ``make help`` for others. You can also use these targets after running @@ -1580,39 +1592,38 @@ Put the kernel in place *Install the kernel you just built.* [:ref:`... <install_bissbs>`] What you need to do after executing the command in the step-by-step guide -depends on the existence and the implementation of an ``installkernel`` -executable. Many commodity Linux distributions ship such a kernel installer in -'/sbin/' that does everything needed, hence there is nothing left for you -except rebooting. But some distributions contain an installkernel that does -only part of the job -- and a few lack it completely and leave all the work to -you. - -If ``installkernel`` is found, the kernel's build system will delegate the -actual installation of your kernel's image and related files to this executable. -On almost all Linux distributions it will store the image as '/boot/vmlinuz- -<kernelrelease identifier>' and put a 'System.map-<kernelrelease -identifier>' alongside it. Your kernel will thus be installed in parallel to any -existing ones, unless you already have one with exactly the same release name. - -Installkernel on many distributions will afterwards generate an 'initramfs' -(often also called 'initrd'), which commodity distributions rely on for booting; -hence be sure to keep the order of the two make targets used in the step-by-step -guide, as things will go sideways if you install your kernel's image before its -modules. Often installkernel will then add your kernel to the bootloader -configuration, too. You have to take care of one or both of these tasks -yourself, if your distributions installkernel doesn't handle them. - -A few distributions like Arch Linux and its derivatives totally lack an -installkernel executable. On those just install the modules using the kernel's -build system and then install the image and the System.map file manually:: - - sudo make modules_install +depends on the existence and the implementation of ``/sbin/installkernel`` +executable on your distribution. + +If installkernel is found, the kernel's build system will delegate the actual +installation of your kernel image to this executable, which then performs some +or all of these tasks: + +* On almost all Linux distributions installkernel will store your kernel's + image in /boot/, usually as '/boot/vmlinuz-<kernelrelease_id>'; often it will + put a 'System.map-<kernelrelease_id>' alongside it. + +* On most distributions installkernel will then generate an 'initramfs' + (sometimes also called 'initrd'), which usually are stored as + '/boot/initramfs-<kernelrelease_id>.img' or + '/boot/initrd-<kernelrelease_id>'. Commodity distributions rely on this file + for booting, hence ensure to execute the make target 'modules_install' first, + as your distribution's initramfs generator otherwise will be unable to find + the modules that go into the image. + +* On some distributions installkernel will then add an entry for your kernel + to your bootloader's configuration. + +You have to take care of some or all of the tasks yourself, if your +distribution lacks a installkernel script or does only handle part of them. +Consult the distribution's documentation for details. If in doubt, install the +kernel manually:: + sudo install -m 0600 $(make -s image_name) /boot/vmlinuz-$(make -s kernelrelease) sudo install -m 0600 System.map /boot/System.map-$(make -s kernelrelease) -If your distribution boots with the help of an initramfs, now generate one for -your kernel using the tools your distribution provides for this process. -Afterwards add your kernel to your bootloader configuration and reboot. +Now generate your initramfs using the tools your distribution provides for this +process. Afterwards add your kernel to your bootloader configuration and reboot. [:ref:`back to step-by-step guide <install_bissbs>`] @@ -1637,20 +1648,39 @@ need to look in different places. [:ref:`back to step-by-step guide <storagespace_bissbs>`] +.. _tainted_bisref: + +Check if your newly built kernel considers itself 'tainted' +----------------------------------------------------------- + + *Check if the kernel marked itself as 'tainted'.* + [:ref:`... <tainted_bissbs>`] + +Linux marks itself as tainted when something happens that potentially leads to +follow-up errors that look totally unrelated. That is why developers might +ignore or react scantly to reports from tainted kernels -- unless of course the +kernel set the flag right when the reported bug occurred. + +That's why you want check why a kernel is tainted as explained in +Documentation/admin-guide/tainted-kernels.rst; doing so is also in your own +interest, as your testing might be flawed otherwise. + +[:ref:`back to step-by-step guide <tainted_bissbs>`] + .. _recheckbroken_bisref: -Check the kernel built from the latest codebase ------------------------------------------------ +Check the kernel built from a recent mainline codebase +------------------------------------------------------ - *Reboot into the kernel you just built and check if the feature that regressed - is really broken there.* [:ref:`... <recheckbroken_bissbs>`] + *Verify if your bug occurs with the newly built kernel.* + [:ref:`... <recheckbroken_bissbs>`] -There are a couple of reasons why the regression you face might not show up with -your own kernel built from the latest codebase. These are the most frequent: +There are a couple of reasons why your bug or regression might not show up with +the kernel you built from the latest codebase. These are the most frequent: -* The cause for the regression was fixed meanwhile. +* The bug was fixed meanwhile. -* The regression with the broken kernel was caused by a change in the build +* What you suspected to be a regression was caused by a change in the build configuration the provider of your kernel carried out. * Your problem might be a race condition that does not show up with your kernel; @@ -1702,9 +1732,9 @@ it's possible that the thing that regressed might never have worked in vanilla builds of the 'good' version in the first place. There is a third reason for those that noticed a regression between -stable/longterm kernels of different series (e.g. v6.0.13..v6.1.5): it will +stable/longterm kernels of different series (e.g. 6.0.13..6.1.5): it will ensure the kernel version you assumed to be 'good' earlier in the process (e.g. -v6.0) actually is working. +6.0) actually is working. [:ref:`back to step-by-step guide <introworkingcheck_bissbs>`] @@ -1720,6 +1750,9 @@ In case the feature that broke with newer kernels does not work with your first self-built kernel, find and resolve the cause before moving on. There are a multitude of reasons why this might happen. Some ideas where to look: +* Check the taint status and the output of ``dmesg``, maybe something unrelated + went wrong. + * Maybe localmodconfig did something odd and disabled the module required to test the feature? Then you might want to recreate a .config file based on the one from the last working kernel and skip trimming it down; manually disabling @@ -1734,8 +1767,8 @@ multitude of reasons why this might happen. Some ideas where to look: Note, if you found and fixed problems with the .config file, you want to use it to build another kernel from the latest codebase, as your earlier tests with -mainline and the latest version from an affected stable/longterm series most -likely has been flawed. +mainline and the latest version from an affected stable/longterm series were most +likely flawed. [:ref:`back to step-by-step guide <recheckworking_bissbs>`] @@ -1748,8 +1781,8 @@ Start the bisection 'good' and 'bad'.* [:ref:`... <bisectstart_bissbs>`] This will start the bisection process; the last of the commands will make Git -checkout a commit round about half-way between the 'good' and the 'bad' changes -for your to test. +check out a commit round about half-way between the 'good' and the 'bad' changes +for you to test. [:ref:`back to step-by-step guide <bisectstart_bissbs>`] @@ -1774,7 +1807,7 @@ There are two things worth of note here: * Those slightly odd looking version identifiers can happen during bisections, because the Linux kernel subsystems prepare their changes for a new mainline release (say 6.2) before its predecessor (e.g. 6.1) is finished. They thus - base them on a somewhat earlier point like v6.1-rc1 or even v6.0 -- and then + base them on a somewhat earlier point like 6.1-rc1 or even 6.0 -- and then get merged for 6.2 without rebasing nor squashing them once 6.1 is out. This leads to those slightly odd looking version identifiers coming up during bisections. @@ -1790,7 +1823,7 @@ Bisection checkpoint [:ref:`... <bisecttest_bissbs>`] Ensure what you tell Git is accurate: getting it wrong just one time will bring -the rest of the bisection totally of course, hence all testing after that point +the rest of the bisection totally off course, hence all testing after that point will be for nothing. [:ref:`back to step-by-step guide <bisecttest_bissbs>`] @@ -1811,7 +1844,7 @@ instead of testing ten or more kernels you might only have to build a few to resolve things. The .config file is put aside, as there is a decent chance that developers might -ask for it after you reported the regression. +ask for it after you report the regression. [:ref:`back to step-by-step guide <bisectlog_bissbs>`] @@ -1861,7 +1894,7 @@ simply remove its modules directory in /lib/modules/. The other place is /boot/, where typically two up to five files will be placed during installation of a kernel. All of them usually contain the release name in -their file name, but how many files and their exact name depends somewhat on +their file name, but how many files and their exact names depend somewhat on your distribution's installkernel executable and its initramfs generator. On some distributions the ``kernel-install remove...`` command mentioned in the step-by-step guide will delete all of these files for you while also removing diff --git a/Documentation/arch/arm64/elf_hwcaps.rst b/Documentation/arch/arm64/elf_hwcaps.rst index ced7b335e2e001..448c1664879bc1 100644 --- a/Documentation/arch/arm64/elf_hwcaps.rst +++ b/Documentation/arch/arm64/elf_hwcaps.rst @@ -317,6 +317,55 @@ HWCAP2_LRCPC3 HWCAP2_LSE128 Functionality implied by ID_AA64ISAR0_EL1.Atomic == 0b0011. +HWCAP2_FPMR + Functionality implied by ID_AA64PFR2_EL1.FMR == 0b0001. + +HWCAP2_LUT + Functionality implied by ID_AA64ISAR2_EL1.LUT == 0b0001. + +HWCAP2_FAMINMAX + Functionality implied by ID_AA64ISAR3_EL1.FAMINMAX == 0b0001. + +HWCAP2_F8CVT + Functionality implied by ID_AA64FPFR0_EL1.F8CVT == 0b1. + +HWCAP2_F8FMA + Functionality implied by ID_AA64FPFR0_EL1.F8FMA == 0b1. + +HWCAP2_F8DP4 + Functionality implied by ID_AA64FPFR0_EL1.F8DP4 == 0b1. + +HWCAP2_F8DP2 + Functionality implied by ID_AA64FPFR0_EL1.F8DP2 == 0b1. + +HWCAP2_F8E4M3 + Functionality implied by ID_AA64FPFR0_EL1.F8E4M3 == 0b1. + +HWCAP2_F8E5M2 + Functionality implied by ID_AA64FPFR0_EL1.F8E5M2 == 0b1. + +HWCAP2_SME_LUTV2 + Functionality implied by ID_AA64SMFR0_EL1.LUTv2 == 0b1. + +HWCAP2_SME_F8F16 + Functionality implied by ID_AA64SMFR0_EL1.F8F16 == 0b1. + +HWCAP2_SME_F8F32 + Functionality implied by ID_AA64SMFR0_EL1.F8F32 == 0b1. + +HWCAP2_SME_SF8FMA + Functionality implied by ID_AA64SMFR0_EL1.SF8FMA == 0b1. + +HWCAP2_SME_SF8DP4 + Functionality implied by ID_AA64SMFR0_EL1.SF8DP4 == 0b1. + +HWCAP2_SME_SF8DP2 + Functionality implied by ID_AA64SMFR0_EL1.SF8DP2 == 0b1. + +HWCAP2_SME_SF8DP4 + Functionality implied by ID_AA64SMFR0_EL1.SF8DP4 == 0b1. + + 4. Unused AT_HWCAP bits ----------------------- diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst index 45a7f4932fe07f..d33e27c5ce6108 100644 --- a/Documentation/arch/arm64/silicon-errata.rst +++ b/Documentation/arch/arm64/silicon-errata.rst @@ -35,8 +35,9 @@ can be triggered by Linux). For software workarounds that may adversely impact systems unaffected by the erratum in question, a Kconfig entry is added under "Kernel Features" -> "ARM errata workarounds via the alternatives framework". -These are enabled by default and patched in at runtime when an affected -CPU is detected. For less-intrusive workarounds, a Kconfig option is not +With the exception of workarounds for errata deemed "rare" by Arm, these +are enabled by default and patched in at runtime when an affected CPU is +detected. For less-intrusive workarounds, a Kconfig option is not available and the code is structured (preferably with a comment) in such a way that the erratum will not be hit. diff --git a/Documentation/arch/arm64/sme.rst b/Documentation/arch/arm64/sme.rst index 3d0e53ecac4fe5..be317d45741743 100644 --- a/Documentation/arch/arm64/sme.rst +++ b/Documentation/arch/arm64/sme.rst @@ -75,7 +75,7 @@ model features for SME is included in Appendix A. 2. Vector lengths ------------------ -SME defines a second vector length similar to the SVE vector length which is +SME defines a second vector length similar to the SVE vector length which controls the size of the streaming mode SVE vectors and the ZA matrix array. The ZA matrix is square with each side having as many bytes as a streaming mode SVE vector. @@ -238,12 +238,12 @@ prctl(PR_SME_SET_VL, unsigned long arg) bits of Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become unspecified, including both streaming and non-streaming SVE state. Calling PR_SME_SET_VL with vl equal to the thread's current vector - length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag, + length, or calling PR_SME_SET_VL with the PR_SME_SET_VL_ONEXEC flag, does not constitute a change to the vector length for this purpose. * Changing the vector length causes PSTATE.ZA and PSTATE.SM to be cleared. Calling PR_SME_SET_VL with vl equal to the thread's current vector - length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag, + length, or calling PR_SME_SET_VL with the PR_SME_SET_VL_ONEXEC flag, does not constitute a change to the vector length for this purpose. @@ -379,9 +379,8 @@ The regset data starts with struct user_za_header, containing: /proc/sys/abi/sme_default_vector_length Writing the text representation of an integer to this file sets the system - default vector length to the specified value, unless the value is greater - than the maximum vector length supported by the system in which case the - default vector length is set to that maximum. + default vector length to the specified value rounded to a supported value + using the same rules as for setting vector length via PR_SME_SET_VL. The result can be determined by reopening the file and reading its contents. diff --git a/Documentation/arch/arm64/sve.rst b/Documentation/arch/arm64/sve.rst index 0d9a426e9f858d..8d8837fc39ec71 100644 --- a/Documentation/arch/arm64/sve.rst +++ b/Documentation/arch/arm64/sve.rst @@ -117,11 +117,6 @@ the SVE instruction set architecture. * The SVE registers are not used to pass arguments to or receive results from any syscall. -* In practice the affected registers/bits will be preserved or will be replaced - with zeros on return from a syscall, but userspace should not make - assumptions about this. The kernel behaviour may vary on a case-by-case - basis. - * All other SVE state of a thread, including the currently configured vector length, the state of the PR_SVE_VL_INHERIT flag, and the deferred vector length (if any), is preserved across all syscalls, subject to the specific @@ -428,9 +423,8 @@ The regset data starts with struct user_sve_header, containing: /proc/sys/abi/sve_default_vector_length Writing the text representation of an integer to this file sets the system - default vector length to the specified value, unless the value is greater - than the maximum vector length supported by the system in which case the - default vector length is set to that maximum. + default vector length to the specified value rounded to a supported value + using the same rules as for setting vector length via PR_SVE_SET_VL. The result can be determined by reopening the file and reading its contents. diff --git a/Documentation/arch/x86/amd_hsmp.rst b/Documentation/arch/x86/amd_hsmp.rst index c92bfd55359f2e..1e499ecf5f4ef4 100644 --- a/Documentation/arch/x86/amd_hsmp.rst +++ b/Documentation/arch/x86/amd_hsmp.rst @@ -13,7 +13,8 @@ set of mailbox registers. More details on the interface can be found in chapter "7 Host System Management Port (HSMP)" of the family/model PPR -Eg: https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip +Eg: https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/programmer-references/55898_B1_pub_0_50.zip + HSMP interface is supported on EPYC server CPU models only. @@ -97,8 +98,8 @@ what happened. The transaction returns 0 on success. More details on the interface and message definitions can be found in chapter "7 Host System Management Port (HSMP)" of the respective family/model PPR -eg: https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip +eg: https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/programmer-references/55898_B1_pub_0_50.zip User space C-APIs are made available by linking against the esmi library, -which is provided by the E-SMS project https://developer.amd.com/e-sms/. +which is provided by the E-SMS project https://www.amd.com/en/developer/e-sms.html. See: https://github.com/amd/esmi_ib_library diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst index d56f298a9d7cae..d7de44f5339d43 100644 --- a/Documentation/dev-tools/kasan.rst +++ b/Documentation/dev-tools/kasan.rst @@ -169,7 +169,7 @@ Error reports A typical KASAN report looks like this:: ================================================================== - BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [test_kasan] + BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [kasan_test] Write of size 1 at addr ffff8801f44ec37b by task insmod/2760 CPU: 1 PID: 2760 Comm: insmod Not tainted 4.19.0-rc3+ #698 @@ -179,8 +179,8 @@ A typical KASAN report looks like this:: print_address_description+0x73/0x280 kasan_report+0x144/0x187 __asan_report_store1_noabort+0x17/0x20 - kmalloc_oob_right+0xa8/0xbc [test_kasan] - kmalloc_tests_init+0x16/0x700 [test_kasan] + kmalloc_oob_right+0xa8/0xbc [kasan_test] + kmalloc_tests_init+0x16/0x700 [kasan_test] do_one_initcall+0xa5/0x3ae do_init_module+0x1b6/0x547 load_module+0x75df/0x8070 @@ -200,8 +200,8 @@ A typical KASAN report looks like this:: save_stack+0x43/0xd0 kasan_kmalloc+0xa7/0xd0 kmem_cache_alloc_trace+0xe1/0x1b0 - kmalloc_oob_right+0x56/0xbc [test_kasan] - kmalloc_tests_init+0x16/0x700 [test_kasan] + kmalloc_oob_right+0x56/0xbc [kasan_test] + kmalloc_tests_init+0x16/0x700 [kasan_test] do_one_initcall+0xa5/0x3ae do_init_module+0x1b6/0x547 load_module+0x75df/0x8070 @@ -531,15 +531,15 @@ When a test passes:: When a test fails due to a failed ``kmalloc``:: - # kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163 + # kmalloc_large_oob_right: ASSERTION FAILED at mm/kasan/kasan_test.c:245 Expected ptr is not null, but is - not ok 4 - kmalloc_large_oob_right + not ok 5 - kmalloc_large_oob_right When a test fails due to a missing KASAN report:: - # kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:974 + # kmalloc_double_kzfree: EXPECTATION FAILED at mm/kasan/kasan_test.c:709 KASAN failure expected in "kfree_sensitive(ptr)", but none occurred - not ok 44 - kmalloc_double_kzfree + not ok 28 - kmalloc_double_kzfree At the end the cumulative status of all KASAN tests is printed. On success:: @@ -555,7 +555,7 @@ There are a few ways to run KUnit-compatible KASAN tests. 1. Loadable module With ``CONFIG_KUNIT`` enabled, KASAN-KUnit tests can be built as a loadable - module and run by loading ``test_kasan.ko`` with ``insmod`` or ``modprobe``. + module and run by loading ``kasan_test.ko`` with ``insmod`` or ``modprobe``. 2. Built-In diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 129cf698fa8a66..5e08e3a6a97b10 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -64,9 +64,6 @@ override DTC_FLAGS := \ -Wno-unique_unit_address \ -Wunique_unit_address_if_enabled -# Disable undocumented compatible checks until warning free -override DT_CHECKER_FLAGS ?= - $(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE $(call if_changed_rule,chkdt) diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt deleted file mode 100644 index 323905af82c313..00000000000000 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt +++ /dev/null @@ -1,26 +0,0 @@ -Mediatek hifsys controller -============================ - -The Mediatek hifsys controller provides various clocks and reset -outputs to the system. - -Required Properties: - -- compatible: Should be: - - "mediatek,mt2701-hifsys", "syscon" - - "mediatek,mt7622-hifsys", "syscon" - - "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon" -- #clock-cells: Must be 1 - -The hifsys controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -hifsys: clock-controller@1a000000 { - compatible = "mediatek,mt2701-hifsys", "syscon"; - reg = <0 0x1a000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt deleted file mode 100644 index d179a61536f437..00000000000000 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt +++ /dev/null @@ -1,25 +0,0 @@ -MediaTek PCIESYS controller -============================ - -The MediaTek PCIESYS controller provides various clocks to the system. - -Required Properties: - -- compatible: Should be: - - "mediatek,mt7622-pciesys", "syscon" - - "mediatek,mt7629-pciesys", "syscon" -- #clock-cells: Must be 1 -- #reset-cells: Must be 1 - -The PCIESYS controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -pciesys: pciesys@1a100800 { - compatible = "mediatek,mt7622-pciesys", "syscon"; - reg = <0 0x1a100800 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt deleted file mode 100644 index 7cb02c93061371..00000000000000 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt +++ /dev/null @@ -1,25 +0,0 @@ -MediaTek SSUSBSYS controller -============================ - -The MediaTek SSUSBSYS controller provides various clocks to the system. - -Required Properties: - -- compatible: Should be: - - "mediatek,mt7622-ssusbsys", "syscon" - - "mediatek,mt7629-ssusbsys", "syscon" -- #clock-cells: Must be 1 -- #reset-cells: Must be 1 - -The SSUSBSYS controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -ssusbsys: ssusbsys@1a000000 { - compatible = "mediatek,mt7622-ssusbsys", "syscon"; - reg = <0 0x1a000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml index 61ddc3b5b247b0..8eec07d9d45428 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml @@ -44,14 +44,21 @@ properties: minItems: 1 maxItems: 2 - qcom,dsb-element-size: + qcom,dsb-element-bits: description: Specifies the DSB(Discrete Single Bit) element size supported by the monitor. The associated aggregator will read this size before it is enabled. DSB element size currently only supports 32-bit and 64-bit. - $ref: /schemas/types.yaml#/definitions/uint8 enum: [32, 64] + qcom,cmb-element-bits: + description: + Specifies the CMB(Continuous Multi-Bit) element size supported by + the monitor. The associated aggregator will read this size before it + is enabled. CMB element size currently only supports 8-bit, 32-bit + and 64-bit. + enum: [8, 32, 64] + qcom,dsb-msrs-num: description: Specifies the number of DSB(Discrete Single Bit) MSR(mux select register) @@ -61,6 +68,15 @@ properties: minimum: 0 maximum: 32 + qcom,cmb-msrs-num: + description: + Specifies the number of CMB MSR(mux select register) registers supported + by the monitor. If this property is not configured or set to 0, it means + this TPDM doesn't support CMB MSR. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 32 + clocks: maxItems: 1 @@ -94,7 +110,7 @@ examples: compatible = "qcom,coresight-tpdm", "arm,primecell"; reg = <0x0684c000 0x1000>; - qcom,dsb-element-size = /bits/ 8 <32>; + qcom,dsb-element-bits = <32>; qcom,dsb-msrs-num = <16>; clocks = <&aoss_qmp>; @@ -110,4 +126,22 @@ examples: }; }; + tpdm@6c29000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x06c29000 0x1000>; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_ipcc_out_funnel_center: endpoint { + remote-endpoint = <&funnel_center_in_tpdm_ipcc>; + }; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt index 851f48ead92710..f53c430f648c97 100644 --- a/Documentation/devicetree/bindings/arm/syna.txt +++ b/Documentation/devicetree/bindings/arm/syna.txt @@ -6,18 +6,6 @@ berlin SoCs are now Synaptics' SoCs now. --------------------------------------------------------------- -Work in progress statement: - -Device tree files and bindings applying to Marvell Berlin SoCs and boards are -considered "unstable". Any Marvell Berlin device tree binding may change at any -time. Be sure to use a device tree binary and a kernel image generated from the -same source tree. - -Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a -stable binding/ABI. - ---------------------------------------------------------------- - Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 shall have the following properties: diff --git a/Documentation/devicetree/bindings/ata/ahci-mtk.txt b/Documentation/devicetree/bindings/ata/ahci-mtk.txt deleted file mode 100644 index d2aa696b161b31..00000000000000 --- a/Documentation/devicetree/bindings/ata/ahci-mtk.txt +++ /dev/null @@ -1,51 +0,0 @@ -MediaTek Serial ATA controller - -Required properties: - - compatible : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci". - When using "mediatek,mtk-ahci" compatible strings, you - need SoC specific ones in addition, one of: - - "mediatek,mt7622-ahci" - - reg : Physical base addresses and length of register sets. - - interrupts : Interrupt associated with the SATA device. - - interrupt-names : Associated name must be: "hostc". - - clocks : A list of phandle and clock specifier pairs, one for each - entry in clock-names. - - clock-names : Associated names must be: "ahb", "axi", "asic", "rbc", "pm". - - phys : A phandle and PHY specifier pair for the PHY port. - - phy-names : Associated name must be: "sata-phy". - - ports-implemented : See ./ahci-platform.txt for details. - -Optional properties: - - power-domains : A phandle and power domain specifier pair to the power - domain which is responsible for collapsing and restoring - power to the peripheral. - - resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names : Associated names must be: "axi", "sw", "reg". - - mediatek,phy-mode : A phandle to the system controller, used to enable - SATA function. - -Example: - - sata: sata@1a200000 { - compatible = "mediatek,mt7622-ahci", - "mediatek,mtk-ahci"; - reg = <0 0x1a200000 0 0x1100>; - interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hostc"; - clocks = <&pciesys CLK_SATA_AHB_EN>, - <&pciesys CLK_SATA_AXI_EN>, - <&pciesys CLK_SATA_ASIC_EN>, - <&pciesys CLK_SATA_RBC_EN>, - <&pciesys CLK_SATA_PM_EN>; - clock-names = "ahb", "axi", "asic", "rbc", "pm"; - phys = <&u3port1 PHY_TYPE_SATA>; - phy-names = "sata-phy"; - ports-implemented = <0x1>; - power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; - resets = <&pciesys MT7622_SATA_AXI_BUS_RST>, - <&pciesys MT7622_SATA_PHY_SW_RST>, - <&pciesys MT7622_SATA_PHY_REG_RST>; - reset-names = "axi", "sw", "reg"; - mediatek,phy-mode = <&pciesys>; - }; diff --git a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt b/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt deleted file mode 100644 index c1d22b3ae1348f..00000000000000 --- a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt +++ /dev/null @@ -1,19 +0,0 @@ -Atmel AT91RM9200 CompactFlash - -Required properties: -- compatible : "atmel,at91rm9200-cf". -- reg : should specify localbus address and size used. -- gpios : specifies the gpio pins to control the CF device. Detect - and reset gpio's are mandatory while irq and vcc gpio's are - optional and may be set to 0 if not present. - -Example: -compact-flash@50000000 { - compatible = "atmel,at91rm9200-cf"; - reg = <0x50000000 0x30000000>; - gpios = <&pioC 13 0 /* irq */ - &pioC 15 0 /* detect */ - 0 /* vcc */ - &pioC 5 0 /* reset */ - >; -}; diff --git a/Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml b/Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml new file mode 100644 index 00000000000000..a34bd2e9c352e4 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/mediatek,mtk-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Serial ATA controller + +maintainers: + - Ryder Lee <ryder.lee@mediatek.com> + +allOf: + - $ref: ahci-common.yaml# + +properties: + compatible: + items: + - enum: + - mediatek,mt7622-ahci + - const: mediatek,mtk-ahci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: hostc + + clocks: + maxItems: 5 + + clock-names: + items: + - const: ahb + - const: axi + - const: asic + - const: rbc + - const: pm + + power-domains: + maxItems: 1 + + resets: + maxItems: 3 + + reset-names: + items: + - const: axi + - const: sw + - const: reg + + mediatek,phy-mode: + description: System controller phandle, used to enable SATA function + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - phys + - phy-names + - ports-implemented + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt7622-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/power/mt7622-power.h> + #include <dt-bindings/reset/mt7622-reset.h> + + sata@1a200000 { + compatible = "mediatek,mt7622-ahci", "mediatek,mtk-ahci"; + reg = <0x1a200000 0x1100>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hostc"; + clocks = <&pciesys CLK_SATA_AHB_EN>, + <&pciesys CLK_SATA_AXI_EN>, + <&pciesys CLK_SATA_ASIC_EN>, + <&pciesys CLK_SATA_RBC_EN>, + <&pciesys CLK_SATA_PM_EN>; + clock-names = "ahb", "axi", "asic", "rbc", "pm"; + phys = <&u3port1 PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + resets = <&pciesys MT7622_SATA_AXI_BUS_RST>, + <&pciesys MT7622_SATA_PHY_SW_RST>, + <&pciesys MT7622_SATA_PHY_REG_RST>; + reset-names = "axi", "sw", "reg"; + mediatek,phy-mode = <&pciesys>; + }; diff --git a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml index 5d02bd032a85fe..439f7b811a94a4 100644 --- a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml @@ -39,6 +39,6 @@ additionalProperties: false examples: - | lcd@10008000 { - compatible = "arm,versatile-lcd"; - reg = <0x10008000 0x1000>; + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml b/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml new file mode 100644 index 00000000000000..328954893c645a --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/gpio-7-segment.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO based LED segment display + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +properties: + compatible: + const: gpio-7-segment + + segment-gpios: + description: | + An array of GPIOs one per segment. The first GPIO corresponds to the A + segment, the seventh GPIO corresponds to the G segment. Some LED blocks + also have a decimal point which can be specified as an optional eighth + segment. + + -a- + | | + f b + | | + -g- + | | + e c + | | + -d- dp + + minItems: 7 + maxItems: 8 + +required: + - segment-gpios + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/gpio/gpio.h> + + led-7seg { + compatible = "gpio-7-segment"; + segment-gpios = <&gpio 0 GPIO_ACTIVE_LOW>, + <&gpio 1 GPIO_ACTIVE_LOW>, + <&gpio 2 GPIO_ACTIVE_LOW>, + <&gpio 3 GPIO_ACTIVE_LOW>, + <&gpio 4 GPIO_ACTIVE_LOW>, + <&gpio 5 GPIO_ACTIVE_LOW>, + <&gpio 6 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml index 406a922a714e8f..3ca0e9863d836d 100644 --- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml @@ -84,42 +84,44 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - auxdisplay { - compatible = "hit,hd44780"; - - data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>, - <&hc595 1 GPIO_ACTIVE_HIGH>, - <&hc595 2 GPIO_ACTIVE_HIGH>, - <&hc595 3 GPIO_ACTIVE_HIGH>; - enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; - - display-height-chars = <2>; - display-width-chars = <16>; + display-controller { + compatible = "hit,hd44780"; + + data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>, + <&hc595 1 GPIO_ACTIVE_HIGH>, + <&hc595 2 GPIO_ACTIVE_HIGH>, + <&hc595 3 GPIO_ACTIVE_HIGH>; + enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + + display-height-chars = <2>; + display-width-chars = <16>; }; + - | #include <dt-bindings/gpio/gpio.h> i2c { - #address-cells = <1>; - #size-cells = <0>; - - pcf8574: pcf8574@27 { - compatible = "nxp,pcf8574"; - reg = <0x27>; - gpio-controller; - #gpio-cells = <2>; - }; + #address-cells = <1>; + #size-cells = <0>; + + pcf8574: gpio-expander@27 { + compatible = "nxp,pcf8574"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; }; - hd44780 { - compatible = "hit,hd44780"; - display-height-chars = <2>; - display-width-chars = <16>; - data-gpios = <&pcf8574 4 0>, - <&pcf8574 5 0>, - <&pcf8574 6 0>, - <&pcf8574 7 0>; - enable-gpios = <&pcf8574 2 0>; - rs-gpios = <&pcf8574 0 0>; - rw-gpios = <&pcf8574 1 0>; - backlight-gpios = <&pcf8574 3 0>; + + display-controller { + compatible = "hit,hd44780"; + display-height-chars = <2>; + display-width-chars = <16>; + data-gpios = <&pcf8574 4 GPIO_ACTIVE_HIGH>, + <&pcf8574 5 GPIO_ACTIVE_HIGH>, + <&pcf8574 6 GPIO_ACTIVE_HIGH>, + <&pcf8574 7 GPIO_ACTIVE_HIGH>; + enable-gpios = <&pcf8574 2 GPIO_ACTIVE_HIGH>; + rs-gpios = <&pcf8574 0 GPIO_ACTIVE_HIGH>; + rw-gpios = <&pcf8574 1 GPIO_ACTIVE_HIGH>; + backlight-gpios = <&pcf8574 3 GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml index be95f6b97b41a5..b90eec2077b4bd 100644 --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml @@ -74,31 +74,31 @@ examples: #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> i2c { - #address-cells = <1>; - #size-cells = <0>; - - ht16k33: ht16k33@70 { - compatible = "holtek,ht16k33"; - reg = <0x70>; - refresh-rate-hz = <20>; - interrupt-parent = <&gpio4>; - interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; - debounce-delay-ms = <50>; - linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>, - <MATRIX_KEY(3, 0, KEY_F8)>, - <MATRIX_KEY(4, 0, KEY_F10)>, - <MATRIX_KEY(5, 0, KEY_F4)>, - <MATRIX_KEY(6, 0, KEY_F2)>, - <MATRIX_KEY(2, 1, KEY_F5)>, - <MATRIX_KEY(3, 1, KEY_F7)>, - <MATRIX_KEY(4, 1, KEY_F9)>, - <MATRIX_KEY(5, 1, KEY_F3)>, - <MATRIX_KEY(6, 1, KEY_F1)>; - - led { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_BACKLIGHT; - linux,default-trigger = "backlight"; - }; + #address-cells = <1>; + #size-cells = <0>; + + display-controller@70 { + compatible = "holtek,ht16k33"; + reg = <0x70>; + refresh-rate-hz = <20>; + interrupt-parent = <&gpio4>; + interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + debounce-delay-ms = <50>; + linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>, + <MATRIX_KEY(3, 0, KEY_F8)>, + <MATRIX_KEY(4, 0, KEY_F10)>, + <MATRIX_KEY(5, 0, KEY_F4)>, + <MATRIX_KEY(6, 0, KEY_F2)>, + <MATRIX_KEY(2, 1, KEY_F5)>, + <MATRIX_KEY(3, 1, KEY_F7)>, + <MATRIX_KEY(4, 1, KEY_F9)>, + <MATRIX_KEY(5, 1, KEY_F3)>, + <MATRIX_KEY(6, 1, KEY_F1)>; + + led { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_BACKLIGHT; + linux,default-trigger = "backlight"; }; - }; + }; + }; diff --git a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml index 1899b23de7d1e4..55e9831b3f67c6 100644 --- a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml @@ -50,6 +50,6 @@ additionalProperties: false examples: - | lcd: lcd@17fff000 { - compatible = "img,boston-lcd"; - reg = <0x17fff000 0x8>; + compatible = "img,boston-lcd"; + reg = <0x17fff000 0x8>; }; diff --git a/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml b/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml new file mode 100644 index 00000000000000..20dd9e8c819016 --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/maxim,max6959.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX6958/6959 7-segment LED display controller + +maintainers: + - Andy Shevchenko <andriy.shevchenko@linux.intel.com> + +description: + The Maxim MAX6958/6959 7-segment LED display controller provides + an I2C interface to up to four 7-segment LED digits. The MAX6959, + in comparison to MAX6958, adds input support. Type of the chip can + be autodetected via specific register read, and hence the features + may be enabled in the driver at run-time, in case they are requested + via Device Tree. A given hardware is simple and does not provide + any additional pins, such as reset or power enable. + +properties: + compatible: + const: maxim,max6959 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + display-controller@38 { + compatible = "maxim,max6959"; + reg = <0x38>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml index 3aaefdbe361ebe..9017c5a3f3d20f 100644 --- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml +++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml @@ -18,6 +18,7 @@ properties: - const: brcm,gisb-arb - items: - enum: + - brcm,bcm74165-gisb-arb # for V7 new style 16nm chips - brcm,bcm7278-gisb-arb # for V7 28nm chips - brcm,bcm7435-gisb-arb # for newer 40nm chips - brcm,bcm7400-gisb-arb # for older 40nm chips and all 65nm chips diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt2701-hifsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt2701-hifsys.yaml new file mode 100644 index 00000000000000..9e7c725093aa1b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,mt2701-hifsys.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mt2701-hifsys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek HIFSYS clock and reset controller + +description: + The MediaTek HIFSYS controller provides various clocks and reset outputs to + the system. + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2701-hifsys + - mediatek,mt7622-hifsys + - items: + - enum: + - mediatek,mt7623-hifsys + - const: mediatek,mt2701-hifsys + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + description: The available clocks are defined in dt-bindings/clock/mt*-clk.h + + "#reset-cells": + const: 1 + +required: + - reg + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clock-controller@1a000000 { + compatible = "mediatek,mt2701-hifsys"; + reg = <0x1a000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml new file mode 100644 index 00000000000000..c77111d10f9058 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mt7622-pciesys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek PCIESYS clock and reset controller + +description: + The MediaTek PCIESYS controller provides various clocks to the system. + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +properties: + compatible: + enum: + - mediatek,mt7622-pciesys + - mediatek,mt7629-pciesys + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + description: The available clocks are defined in dt-bindings/clock/mt*-clk.h + + "#reset-cells": + const: 1 + +required: + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + clock-controller@1a100800 { + compatible = "mediatek,mt7622-pciesys"; + reg = <0x1a100800 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7622-ssusbsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7622-ssusbsys.yaml new file mode 100644 index 00000000000000..da93eccdcfc11b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,mt7622-ssusbsys.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mt7622-ssusbsys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek SSUSBSYS clock and reset controller + +description: + The MediaTek SSUSBSYS controller provides various clocks to the system. + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +properties: + compatible: + enum: + - mediatek,mt7622-ssusbsys + - mediatek,mt7629-ssusbsys + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + description: The available clocks are defined in dt-bindings/clock/mt*-clk.h + + "#reset-cells": + const: 1 + +required: + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + clock-controller@1a000000 { + compatible = "mediatek,mt7622-ssusbsys"; + reg = <0x1a000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml b/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml new file mode 100644 index 00000000000000..2d4f2cde1e5891 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mobileye,eyeq5-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mobileye EyeQ5 clock controller + +description: + The EyeQ5 clock controller handles 10 read-only PLLs derived from the main + crystal clock. It also exposes one divider clock, a child of one of the PLLs. + Its registers live in a shared region called OLB. + +maintainers: + - Grégory Clement <gregory.clement@bootlin.com> + - Théo Lebrun <theo.lebrun@bootlin.com> + - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> + +properties: + compatible: + const: mobileye,eyeq5-clk + + reg: + maxItems: 2 + + reg-names: + items: + - const: plls + - const: ospi + + "#clock-cells": + const: 1 + + clocks: + maxItems: 1 + description: + Input parent clock to all PLLs. Expected to be the main crystal. + + clock-names: + items: + - const: ref + +required: + - compatible + - reg + - reg-names + - "#clock-cells" + - clocks + - clock-names + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml index f369fa34e00cf8..f57aceddac6bed 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml @@ -53,6 +53,9 @@ properties: power-domains: maxItems: 1 + vdd-gfx-supply: + description: Regulator supply for the VDD_GFX pads + '#clock-cells': const: 1 @@ -74,6 +77,12 @@ required: - '#reset-cells' - '#power-domain-cells' +# Require that power-domains and vdd-gfx-supply are not both present +not: + required: + - power-domains + - vdd-gfx-supply + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml index 03fa30fe925393..e0f4d692728c92 100644 --- a/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Q6SSTOP clock Controller maintainers: - - Govind Singh <govinds@codeaurora.org> + - Bjorn Andersson <andersson@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml deleted file mode 100644 index 873a2f918baceb..00000000000000 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml +++ /dev/null @@ -1,61 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Modem Clock Controller on SC7180 - -maintainers: - - Taniya Das <quic_tdas@quicinc.com> - -description: | - Qualcomm modem clock control module provides the clocks on SC7180. - - See also:: include/dt-bindings/clock/qcom,mss-sc7180.h - -properties: - compatible: - const: qcom,sc7180-mss - - clocks: - items: - - description: gcc_mss_mfab_axi clock from GCC - - description: gcc_mss_nav_axi clock from GCC - - description: gcc_mss_cfg_ahb clock from GCC - - clock-names: - items: - - const: gcc_mss_mfab_axis - - const: gcc_mss_nav_axi - - const: cfg_ahb - - '#clock-cells': - const: 1 - - reg: - maxItems: 1 - -required: - - compatible - - reg - - clocks - - '#clock-cells' - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,gcc-sc7180.h> - clock-controller@41a8000 { - compatible = "qcom,sc7180-mss"; - reg = <0x041a8000 0x8000>; - clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>, - <&gcc GCC_MSS_NAV_AXI_CLK>, - <&gcc GCC_MSS_CFG_AHB_CLK>; - clock-names = "gcc_mss_mfab_axis", - "gcc_mss_nav_axi", - "cfg_ahb"; - #clock-cells = <1>; - }; -... diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml index c752c8985a536e..cdc5ded59fe5e0 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml @@ -36,6 +36,8 @@ properties: - samsung,exynos850-cmu-aud - samsung,exynos850-cmu-cmgp - samsung,exynos850-cmu-core + - samsung,exynos850-cmu-cpucl0 + - samsung,exynos850-cmu-cpucl1 - samsung,exynos850-cmu-dpu - samsung,exynos850-cmu-g3d - samsung,exynos850-cmu-hsi @@ -156,6 +158,46 @@ allOf: properties: compatible: contains: + const: samsung,exynos850-cmu-cpucl0 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CPUCL0 switch clock (from CMU_TOP) + - description: CPUCL0 debug clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_cpucl0_switch + - const: dout_cpucl0_dbg + + - if: + properties: + compatible: + contains: + const: samsung,exynos850-cmu-cpucl1 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CPUCL1 switch clock (from CMU_TOP) + - description: CPUCL1 debug clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_cpucl1_switch + - const: dout_cpucl1_dbg + + - if: + properties: + compatible: + contains: const: samsung,exynos850-cmu-dpu then: diff --git a/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml index dc808e2f83272a..b370a10a23a64c 100644 --- a/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml +++ b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml @@ -12,7 +12,7 @@ maintainers: description: | FSD clock controller consist of several clock management unit - (CMU), which generates clocks for various inteernal SoC blocks. + (CMU), which generates clocks for various internal SoC blocks. The root clock comes from external OSC clock (24 MHz). All available clocks are defined as preprocessor macros in diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml index 0b7383b3106b51..7dc0748444fde4 100644 --- a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml @@ -12,7 +12,11 @@ maintainers: properties: compatible: - const: atmel,at91sam9g46-aes + oneOf: + - const: atmel,at91sam9g46-aes + - items: + - const: microchip,sam9x7-aes + - const: atmel,at91sam9g46-aes reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml index ee2ffb0343251f..d378c53314dd06 100644 --- a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml @@ -12,7 +12,11 @@ maintainers: properties: compatible: - const: atmel,at91sam9g46-sha + oneOf: + - const: atmel,at91sam9g46-sha + - items: + - const: microchip,sam9x7-sha + - const: atmel,at91sam9g46-sha reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml index 3d6ed24b1b0064..6a441f79efea52 100644 --- a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml @@ -12,7 +12,11 @@ maintainers: properties: compatible: - const: atmel,at91sam9g46-tdes + oneOf: + - const: atmel,at91sam9g46-tdes + - items: + - const: microchip,sam9x7-tdes + - const: atmel,at91sam9g46-tdes reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml index 09e43157cc71fe..e91bc7dc6ad3d7 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -14,6 +14,7 @@ properties: items: - enum: - qcom,sa8775p-inline-crypto-engine + - qcom,sc7180-inline-crypto-engine - qcom,sm8450-inline-crypto-engine - qcom,sm8550-inline-crypto-engine - qcom,sm8650-inline-crypto-engine diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml index a48bd381063aaf..e285e382d4ecce 100644 --- a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -45,6 +45,7 @@ properties: - items: - enum: - qcom,sc7280-qce + - qcom,sm6350-qce - qcom,sm8250-qce - qcom,sm8350-qce - qcom,sm8450-qce diff --git a/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml b/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml new file mode 100644 index 00000000000000..29ed42485de314 --- /dev/null +++ b/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/atmel/atmel,hlcdc-display-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel's High LCD Controller (HLCDC) + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Claudiu Beznea <claudiu.beznea@tuxon.dev> + +description: + The LCD Controller (LCDC) consists of logic for transferring LCD image + data from an external display buffer to a TFT LCD panel. The LCDC has one + display input buffer per layer that fetches pixels through the single bus + host interface and a look-up table to allow palletized display + configurations. + +properties: + compatible: + const: atmel,hlcdc-display-controller + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Output endpoint of the controller, connecting the LCD panel signals. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + maxItems: 1 + + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint connecting the LCD panel signals. + + properties: + bus-width: + enum: [ 12, 16, 18, 24 ] + +required: + - '#address-cells' + - '#size-cells' + - compatible + - port@0 + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt deleted file mode 100644 index 923aea25344c8d..00000000000000 --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt +++ /dev/null @@ -1,75 +0,0 @@ -Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver - -The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device. -See ../../mfd/atmel-hlcdc.txt for more details. - -Required properties: - - compatible: value should be "atmel,hlcdc-display-controller" - - pinctrl-names: the pin control state names. Should contain "default". - - pinctrl-0: should contain the default pinctrl states. - - #address-cells: should be set to 1. - - #size-cells: should be set to 0. - -Required children nodes: - Children nodes are encoding available output ports and their connections - to external devices using the OF graph representation (see ../graph.txt). - At least one port node is required. - -Optional properties in grandchild nodes: - Any endpoint grandchild node may specify a desired video interface - according to ../../media/video-interfaces.txt, specifically - - bus-width: recognized values are <12>, <16>, <18> and <24>, and - override any output mode selection heuristic, forcing "rgb444", - "rgb565", "rgb666" and "rgb888" respectively. - -Example: - - hlcdc: hlcdc@f0030000 { - compatible = "atmel,sama5d3-hlcdc"; - reg = <0xf0030000 0x2000>; - interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; - clock-names = "periph_clk","sys_clk", "slow_clk"; - - hlcdc-display-controller { - compatible = "atmel,hlcdc-display-controller"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - hlcdc_panel_output: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; - }; - }; - - hlcdc_pwm: hlcdc-pwm { - compatible = "atmel,hlcdc-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwm>; - #pwm-cells = <3>; - }; - }; - -Example 2: With a video interface override to force rgb565; as above -but with these changes/additions: - - &hlcdc { - hlcdc-display-controller { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>; - - port@0 { - hlcdc_panel_output: endpoint@0 { - bus-width = <16>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml new file mode 100644 index 00000000000000..3791c9f4ebab0e --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8mp-hdmi-tx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP DWC HDMI TX Encoder + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MP HDMI transmitter is a Synopsys DesignWare + HDMI 2.0a TX controller IP. + +allOf: + - $ref: /schemas/display/bridge/synopsys,dw-hdmi.yaml# + +properties: + compatible: + enum: + - fsl,imx8mp-hdmi-tx + + reg-io-width: + const: 1 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: iahb + - const: isfr + - const: cec + - const: pix + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI output port + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - power-domains + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/imx8mp-power.h> + + hdmi@32fd8000 { + compatible = "fsl,imx8mp-hdmi-tx"; + reg = <0x32fd8000 0x7eff>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_REF_266M>, + <&clk IMX8MP_CLK_32K>, + <&hdmi_tx_phy>; + clock-names = "iahb", "isfr", "cec", "pix"; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; + reg-io-width = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + hdmi_tx_from_pvi: endpoint { + remote-endpoint = <&pvi_to_hdmi_tx>; + }; + }; + + port@1 { + reg = <1>; + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml index 6ec6d287bff401..c93878b6d7182b 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: SN65DSI86 DSI to eDP bridge chip maintainers: - - Sandeep Panda <spanda@codeaurora.org> + - Douglas Anderson <dianders@chromium.org> description: | The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP. diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml index 1c2be8d6f63340..0681fc49aa1b08 100644 --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml @@ -123,10 +123,16 @@ allOf: - if: properties: compatible: + const: fsl,imx6sx-lcdif + then: + required: + - power-domains + - if: + properties: + compatible: contains: enum: - fsl,imx6sl-lcdif - - fsl,imx6sx-lcdif - fsl,imx8mm-lcdif - fsl,imx8mn-lcdif - fsl,imx8mp-lcdif diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml new file mode 100644 index 00000000000000..56da1636014ce7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP HDMI Parallel Video Interface + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The HDMI parallel video interface is a timing and sync generator block in the + i.MX8MP SoC, that sits between the video source and the HDMI TX controller. + +properties: + compatible: + const: fsl,imx8mp-hdmi-pvi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input from the LCDIF controller. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output to the HDMI TX controller. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/imx8mp-power.h> + + display-bridge@32fc4000 { + compatible = "fsl,imx8mp-hdmi-pvi"; + reg = <0x32fc4000 0x44>; + interrupt-parent = <&irqsteer_hdmi>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pvi_from_lcdif3: endpoint { + remote-endpoint = <&lcdif3_to_pvi>; + }; + }; + + port@1 { + reg = <1>; + pvi_to_hdmi_tx: endpoint { + remote-endpoint = <&hdmi_tx_from_pvi>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 4219936eda5a17..1fa28e9765593a 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -19,6 +19,7 @@ properties: - qcom,msm8916-dsi-ctrl - qcom,msm8953-dsi-ctrl - qcom,msm8974-dsi-ctrl + - qcom,msm8976-dsi-ctrl - qcom,msm8996-dsi-ctrl - qcom,msm8998-dsi-ctrl - qcom,qcm2290-dsi-ctrl @@ -248,6 +249,7 @@ allOf: contains: enum: - qcom,msm8953-dsi-ctrl + - qcom,msm8976-dsi-ctrl then: properties: clocks: diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index 4e1c25b42908a9..b3837368a2606a 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -224,6 +224,7 @@ allOf: enum: - qcom,adreno-gmu-730.1 - qcom,adreno-gmu-740.1 + - qcom,adreno-gmu-750.1 then: properties: reg: diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index b019db954793ea..40b5c6bd11f8ca 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -23,7 +23,7 @@ properties: The driver is parsing the compat string for Adreno to figure out the gpu-id and patch level. items: - - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]$' + - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]+$' - const: qcom,adreno - description: | The driver is parsing the compat string for Imageon to @@ -127,7 +127,7 @@ allOf: properties: compatible: contains: - pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$' + pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]+$' then: properties: @@ -203,7 +203,7 @@ allOf: properties: compatible: contains: - pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]$' + pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]+$' then: # Starting with A6xx, the clocks are usually defined in the GMU node properties: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml index 0999ea07f47bb6..e4576546bf0dbb 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml @@ -127,6 +127,7 @@ patternProperties: - qcom,dsi-phy-20nm - qcom,dsi-phy-28nm-8226 - qcom,dsi-phy-28nm-hpm + - qcom,dsi-phy-28nm-hpm-fam-b - qcom,dsi-phy-28nm-lp - qcom,hdmi-phy-8084 - qcom,hdmi-phy-8660 diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml index a01d15a033176d..c4087cc5abbdd4 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml @@ -13,7 +13,9 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - const: qcom,sm8650-dpu + enum: + - qcom,sm8650-dpu + - qcom,x1e80100-dpu reg: items: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml index bd11119dc93daf..24cece1e888bd3 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml @@ -37,18 +37,21 @@ properties: patternProperties: "^display-controller@[0-9a-f]+$": type: object + additionalProperties: true properties: compatible: const: qcom,sm8650-dpu "^displayport-controller@[0-9a-f]+$": type: object + additionalProperties: true properties: compatible: const: qcom,sm8650-dp "^dsi@[0-9a-f]+$": type: object + additionalProperties: true properties: compatible: items: @@ -57,6 +60,7 @@ patternProperties: "^phy@[0-9a-f]+$": type: object + additionalProperties: true properties: compatible: const: qcom,sm8650-dsi-phy-4nm diff --git a/Documentation/devicetree/bindings/display/msm/qcom,x1e80100-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,x1e80100-mdss.yaml new file mode 100644 index 00000000000000..3b01a0e473332c --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,x1e80100-mdss.yaml @@ -0,0 +1,251 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,x1e80100-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm X1E80100 Display MDSS + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + +description: + X1E80100 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DP interfaces, etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,x1e80100-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 3 + + interconnect-names: + maxItems: 3 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,x1e80100-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,x1e80100-dp + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,x1e80100-dp-phy + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h> + #include <dt-bindings/phy/phy-qcom-qmp.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,x1e80100-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>, + <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_DISPLAY_CFG 0>; + interconnect-names = "mdp0-mem", "mdp1-mem", "cpu-cfg"; + + resets = <&dispcc_core_bcr>; + + power-domains = <&dispcc_gdsc>; + + clocks = <&dispcc_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&dispcc_mdp_clk>; + clock-names = "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,x1e80100-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_axi_clk>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_mdp_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_mdp_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + displayport-controller@ae90000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&dispcc_dptx0_aux_clk>, + <&dispcc_dptx0_link_clk>, + <&dispcc_dptx0_link_intf_clk>, + <&dispcc_dptx0_pixel0_clk>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>, + <&dispcc_mdss_dptx0_pixel0_clk_src>; + assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&mdss_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + }; + }; + }; + + mdss_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml new file mode 100644 index 00000000000000..32df26cbfeed73 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,th101mb31ig002-28a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE TH101MB31IG002-28A WXGA DSI Display Panel + +maintainers: + - Manuel Traut <manut@mecka.net> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel + - boe,th101mb31ig002-28a + + reg: true + backlight: true + enable-gpios: true + power-supply: true + port: true + rotation: true + +required: + - compatible + - reg + - enable-gpios + - power-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,th101mb31ig002-28a"; + reg = <0>; + backlight = <&backlight_lcd0>; + enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; + rotation = <90>; + power-supply = <&vcc_3v3>; + port { + panel_in_dsi: endpoint { + remote-endpoint = <&dsi_out_con>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml new file mode 100644 index 00000000000000..174661d1381111 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/himax,hx83112a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Himax HX83112A-based DSI display panels + +maintainers: + - Luca Weiss <luca.weiss@fairphone.com> + +description: + The Himax HX83112A is a generic DSI Panel IC used to control + LCD panels. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + contains: + const: djn,9a-3r063-1102b + + vdd1-supply: + description: Digital voltage rail + + vsn-supply: + description: Positive source voltage rail + + vsp-supply: + description: Negative source voltage rail + + reg: true + port: true + +required: + - compatible + - reg + - reset-gpios + - vdd1-supply + - vsn-supply + - vsp-supply + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "djn,9a-3r063-1102b"; + reg = <0>; + + backlight = <&pm6150l_wled>; + reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>; + + vdd1-supply = <&vreg_l1e>; + vsn-supply = <&pm6150l_lcdb_ncp>; + vsp-supply = <&pm6150l_lcdb_ldo>; + + port { + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index c5944b4d636c54..d589f167721450 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -14,7 +14,9 @@ allOf: properties: compatible: - const: leadtek,ltk500hd1829 + enum: + - leadtek,ltk101b4029w + - leadtek,ltk500hd1829 reg: true backlight: true reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml index 619edcf6c79183..91921f4b0e5fa0 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml @@ -15,7 +15,9 @@ allOf: properties: compatible: items: - - const: hydis,hva40wv1 + - enum: + - frida,frd400b25025 + - hydis,hva40wv1 - const: novatek,nt35510 description: This indicates the panel manufacturer of the panel that is in turn using the NT35510 panel driver. The compatible diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672e.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672e.yaml new file mode 100644 index 00000000000000..dc4672f3d01d7c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672e.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt36672e.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT36672E LCD DSI Panel + +maintainers: + - Ritesh Kumar <quic_riteshk@quicinc.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: novatek,nt36672e + + reg: + maxItems: 1 + description: DSI virtual channel + + vddi-supply: true + avdd-supply: true + avee-supply: true + port: true + reset-gpios: true + backlight: true + +required: + - compatible + - reg + - vddi-supply + - avdd-supply + - avee-supply + - reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "novatek,nt36672e"; + reg = <0>; + + reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>; + + vddi-supply = <&vreg_l8c_1p8>; + avdd-supply = <&disp_avdd>; + avee-supply = <&disp_avee>; + + backlight = <&pwm_backlight>; + + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml index 9f1016551e0b27..155d8ffa8f6ef1 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml @@ -39,9 +39,13 @@ properties: compatible: items: - enum: + # Admatec 9904379 10.1" 1024x600 LVDS panel + - admatec,9904379 - auo,b101ew05 # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel - chunghwa,claa070wp03xg + # EDT ETML0700Z9NDHA 7.0" WSVGA (1024x600) color TFT LCD LVDS panel + - edt,etml0700z9ndha # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel - hannstar,hsd101pww2 # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 634a10c6f2dddd..a95445f408700b 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -73,6 +73,8 @@ properties: - auo,t215hvn01 # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel - avic,tm070ddh03 + # BOE BP082WX1-100 8.2" WXGA (1280x800) LVDS panel + - boe,bp082wx1-100 # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel - boe,bp101wx1-100 # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel @@ -141,6 +143,8 @@ properties: - edt,etm0700g0edh6 # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch - edt,etml0700y5dha + # Emerging Display Technology Corp. 10.1" LVDS WXGA TFT Display with capacitive touch + - edt,etml1010g3dra # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with # capacitive touch - edt,etmv570g2dhu diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml index 97cccd8a8479a5..6ec471284f97b6 100644 --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml @@ -22,6 +22,8 @@ properties: enum: # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel - anbernic,rg353v-panel-v2 + # Powkiddy RGB10MAX3 5.0" 720x1280 TFT LCD panel + - powkiddy,rgb10max3-panel # Powkiddy RGB30 3.0" 720x720 TFT LCD panel - powkiddy,rgb30-panel # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel @@ -43,6 +45,7 @@ properties: reset-gpios: true backlight: true + rotation: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml b/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml index 6ba3236839215a..187840bb76c7a5 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml index fa745a6f4456c5..77239906751587 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Visionox model RM69299 Panels maintainers: - - Harigovindan P <harigovi@codeaurora.org> + - Abhinav Kumar <quic_abhinavk@quicinc.com> + - Jessica Zhang <quic_jesszhan@quicinc.com> description: | This binding is for display panels using a Visionox RM692999 panel. diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml new file mode 100644 index 00000000000000..08e5b9478051a3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/renesas,rzg2l-du.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L Display Unit (DU) + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + These DT bindings describe the Display Unit embedded in the Renesas RZ/G2L + and RZ/V2L SoCs. + +properties: + compatible: + oneOf: + - enum: + - renesas,r9a07g044-du # RZ/G2{L,LC} + - items: + - enum: + - renesas,r9a07g054-du # RZ/V2L + - const: renesas,r9a07g044-du # RZ/G2L fallback + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Main clock + - description: Register access clock + - description: Video clock + + clock-names: + items: + - const: aclk + - const: pclk + - const: vclk + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + The connections to the DU output video ports are modeled using the OF + graph bindings. The number of ports and their assignment are + model-dependent. Each port shall have a single endpoint. + + patternProperties: + "^port@[0-1]$": + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + + required: + - port@0 + + unevaluatedProperties: false + + renesas,vsps: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle to VSP instance that serves the DU channel + - description: Channel index identifying the LIF instance in that VSP + description: + A list of phandle and channel index tuples to the VSPs that handle the + memory interfaces for the DU channels. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - power-domains + - ports + - renesas,vsps + +additionalProperties: false + +examples: + # RZ/G2L DU + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + display@10890000 { + compatible = "renesas,r9a07g044-du"; + reg = <0x10890000 0x10000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + resets = <&cpg R9A07G044_LCDC_RESET_N>; + power-domains = <&cpg>; + + renesas,vsps = <&vspd0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + port@1 { + reg = <1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml index 7e59dee15a5f4c..af638b6c0d2188 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -94,11 +94,14 @@ properties: - const: default - const: unwedge + power-domains: + maxItems: 1 + ports: $ref: /schemas/graph.yaml#/properties/ports - patternProperties: - "^port(@0)?$": + properties: + port@0: $ref: /schemas/graph.yaml#/properties/port description: Input of the DWC HDMI TX properties: @@ -108,11 +111,14 @@ properties: description: Connection to the VOPB endpoint@1: description: Connection to the VOPL - properties: port@1: $ref: /schemas/graph.yaml#/properties/port description: Output of the DWC HDMI TX + required: + - port@0 + - port@1 + rockchip,grf: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -135,19 +141,25 @@ examples: #include <dt-bindings/clock/rk3288-cru.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/rk3288-power.h> hdmi: hdmi@ff980000 { compatible = "rockchip,rk3288-dw-hdmi"; reg = <0xff980000 0x20000>; reg-io-width = <4>; - ddc-i2c-bus = <&i2c5>; - rockchip,grf = <&grf>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; clock-names = "iahb", "isfr"; + ddc-i2c-bus = <&i2c5>; + power-domains = <&power RK3288_PD_VIO>; + rockchip,grf = <&grf>; ports { - port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -155,11 +167,20 @@ examples: reg = <0>; remote-endpoint = <&vopb_out_hdmi>; }; + hdmi_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_hdmi>; }; }; + + port@1 { + reg = <1>; + + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml index 3afbb52d1b7fe5..153ff86fb40590 100644 --- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml +++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml @@ -131,9 +131,9 @@ allOf: const: sinowealth,sh1106 then: properties: - width: + solomon,width: default: 132 - height: + solomon,height: default: 64 solomon,dclk-div: default: 1 @@ -149,9 +149,9 @@ allOf: - solomon,ssd1305 then: properties: - width: + solomon,width: default: 132 - height: + solomon,height: default: 64 solomon,dclk-div: default: 1 @@ -167,9 +167,9 @@ allOf: - solomon,ssd1306 then: properties: - width: + solomon,width: default: 128 - height: + solomon,height: default: 64 solomon,dclk-div: default: 1 @@ -185,9 +185,9 @@ allOf: - solomon,ssd1307 then: properties: - width: + solomon,width: default: 128 - height: + solomon,height: default: 39 solomon,dclk-div: default: 2 @@ -205,9 +205,9 @@ allOf: - solomon,ssd1309 then: properties: - width: + solomon,width: default: 128 - height: + solomon,height: default: 64 solomon,dclk-div: default: 1 diff --git a/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml b/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml index 37975ee61c5ad4..dd7939989cf4f1 100644 --- a/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml +++ b/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml @@ -30,9 +30,9 @@ allOf: const: solomon,ssd1322 then: properties: - width: + solomon,width: default: 480 - height: + solomon,height: default: 128 - if: @@ -42,9 +42,9 @@ allOf: const: solomon,ssd1325 then: properties: - width: + solomon,width: default: 128 - height: + solomon,height: default: 80 - if: @@ -54,9 +54,9 @@ allOf: const: solomon,ssd1327 then: properties: - width: + solomon,width: default: 128 - height: + solomon,height: default: 128 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/solomon,ssd133x.yaml b/Documentation/devicetree/bindings/display/solomon,ssd133x.yaml new file mode 100644 index 00000000000000..b7780038a34b40 --- /dev/null +++ b/Documentation/devicetree/bindings/display/solomon,ssd133x.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/solomon,ssd133x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Solomon SSD133x OLED Display Controllers + +maintainers: + - Javier Martinez Canillas <javierm@redhat.com> + +allOf: + - $ref: solomon,ssd-common.yaml# + +properties: + compatible: + enum: + - solomon,ssd1331 + + solomon,width: + default: 96 + + solomon,height: + default: 64 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + oled@0 { + compatible = "solomon,ssd1331"; + reg = <0x0>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index b6767ef0d24dec..55e3e490d0e615 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -37,6 +37,7 @@ properties: - description: OVR2 overlay manager for vp2 - description: VP1 video port 1 - description: VP2 video port 2 + - description: common1 DSS register area reg-names: items: @@ -47,6 +48,7 @@ properties: - const: ovr2 - const: vp1 - const: vp2 + - const: common1 clocks: items: @@ -147,9 +149,10 @@ examples: <0x04a07000 0x1000>, /* ovr1 */ <0x04a08000 0x1000>, /* ovr2 */ <0x04a0a000 0x1000>, /* vp1 */ - <0x04a0b000 0x1000>; /* vp2 */ + <0x04a0b000 0x1000>, /* vp2 */ + <0x04a01000 0x1000>; /* common1 */ reg-names = "common", "vidl1", "vid", - "ovr1", "ovr2", "vp1", "vp2"; + "ovr1", "ovr2", "vp1", "vp2", "common1"; ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>; power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 67 1>, diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml index ec2d7a789ffe25..0f2501f72ccace 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml @@ -28,6 +28,9 @@ properties: - items: - const: allwinner,sun8i-r40-dma - const: allwinner,sun50i-a64-dma + - items: + - const: allwinner,sun50i-h616-dma + - const: allwinner,sun50i-a100-dma reg: maxItems: 1 @@ -59,10 +62,11 @@ required: if: properties: compatible: - enum: - - allwinner,sun20i-d1-dma - - allwinner,sun50i-a100-dma - - allwinner,sun50i-h6-dma + contains: + enum: + - allwinner,sun20i-d1-dma + - allwinner,sun50i-a100-dma + - allwinner,sun50i-h6-dma then: properties: diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml index 437db0c62339fa..aa51d278cb67b4 100644 --- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml +++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml @@ -25,6 +25,7 @@ properties: - fsl,imx8qm-edma - fsl,imx93-edma3 - fsl,imx93-edma4 + - fsl,imx95-edma5 - items: - const: fsl,ls1028a-edma - const: fsl,vf610-edma @@ -83,6 +84,7 @@ allOf: - fsl,imx8qm-edma - fsl,imx93-edma3 - fsl,imx93-edma4 + - fsl,imx95-edma5 then: properties: "#dma-cells": diff --git a/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml index b95dd8db5a30a0..37135fa024f9b8 100644 --- a/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml +++ b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml @@ -92,7 +92,8 @@ properties: description: needs firmware more than ver 2 - Shared ASRC: 23 - SAI: 24 - - HDMI Audio: 25 + - Multi SAI: 25 + - HDMI Audio: 26 The third cell: transfer priority ID enum: diff --git a/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml b/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml new file mode 100644 index 00000000000000..d447d5207be043 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/marvell,mmp-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP DMA controller + +maintainers: + - Duje Mihanović <duje.mihanovic@skole.hr> + +description: + Marvell MMP SoCs may have two types of DMA controllers, peripheral and audio. + +properties: + compatible: + enum: + - marvell,pdma-1.0 + - marvell,adma-1.0 + - marvell,pxa910-squ + + reg: + maxItems: 1 + + interrupts: + description: + Interrupt lines for the controller, may be shared or one per DMA channel + minItems: 1 + + asram: + description: + A phandle to the SRAM pool + $ref: /schemas/types.yaml#/definitions/phandle + + '#dma-channels': + deprecated: true + + '#dma-requests': + deprecated: true + +required: + - compatible + - reg + - interrupts + - '#dma-cells' + +allOf: + - $ref: dma-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - marvell,pdma-1.0 + then: + properties: + asram: false + else: + required: + - asram + +unevaluatedProperties: false + +examples: + - | + dma-controller@d4000000 { + compatible = "marvell,pdma-1.0"; + reg = <0xd4000000 0x10000>; + interrupts = <47>; + #dma-cells = <2>; + dma-channels = <16>; + }; diff --git a/Documentation/devicetree/bindings/dma/mediatek,mt7622-hsdma.yaml b/Documentation/devicetree/bindings/dma/mediatek,mt7622-hsdma.yaml new file mode 100644 index 00000000000000..3f1e120e40a38c --- /dev/null +++ b/Documentation/devicetree/bindings/dma/mediatek,mt7622-hsdma.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/mediatek,mt7622-hsdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek High-Speed DMA Controller + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +allOf: + - $ref: dma-controller.yaml# + +properties: + compatible: + enum: + - mediatek,mt7622-hsdma + - mediatek,mt7623-hsdma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: hsdma + + power-domains: + maxItems: 1 + + "#dma-cells": + description: Channel number + const: 1 + +required: + - reg + - interrupts + - clocks + - clock-names + - power-domains + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/mt2701-power.h> + + dma-controller@1b007000 { + compatible = "mediatek,mt7623-hsdma"; + reg = <0x1b007000 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>; + clocks = <ðsys CLK_ETHSYS_HSDMA>; + clock-names = "hsdma"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + #dma-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt deleted file mode 100644 index ec18bf0a802a79..00000000000000 --- a/Documentation/devicetree/bindings/dma/mmp-dma.txt +++ /dev/null @@ -1,81 +0,0 @@ -* MARVELL MMP DMA controller - -Marvell Peripheral DMA Controller -Used platforms: pxa688, pxa910, pxa3xx, etc - -Required properties: -- compatible: Should be "marvell,pdma-1.0" -- reg: Should contain DMA registers location and length. -- interrupts: Either contain all of the per-channel DMA interrupts - or one irq for pdma device - -Optional properties: -- dma-channels: Number of DMA channels supported by the controller (defaults - to 32 when not specified) -- #dma-channels: deprecated -- dma-requests: Number of DMA requestor lines supported by the controller - (defaults to 32 when not specified) -- #dma-requests: deprecated - -"marvell,pdma-1.0" -Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688. - -Examples: - -/* - * Each channel has specific irq - * ICU parse out irq channel from ICU register, - * while DMA controller may not able to distinguish the irq channel - * Using this method, interrupt-parent is required as demuxer - * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq, - * 18~21 is ADMA irq - */ -pdma: dma-controller@d4000000 { - compatible = "marvell,pdma-1.0"; - reg = <0xd4000000 0x10000>; - interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; - interrupt-parent = <&intcmux32>; - dma-channels = <16>; - }; - -/* - * One irq for all channels - * Dmaengine driver (DMA controller) distinguish irq channel via - * parsing internal register - */ -pdma: dma-controller@d4000000 { - compatible = "marvell,pdma-1.0"; - reg = <0xd4000000 0x10000>; - interrupts = <47>; - dma-channels = <16>; - }; - - -Marvell Two Channel DMA Controller used specifically for audio -Used platforms: pxa688, pxa910 - -Required properties: -- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ" -- reg: Should contain DMA registers location and length. -- interrupts: Either contain all of the per-channel DMA interrupts - or one irq for dma device - -"marvell,adma-1.0" used on pxa688 -"marvell,pxa910-squ" used on pxa910 - -Examples: - -/* each channel has specific irq */ -adma0: dma-controller@d42a0800 { - compatible = "marvell,adma-1.0"; - reg = <0xd42a0800 0x100>; - interrupts = <18 19>; - interrupt-parent = <&intcmux32>; - }; - -/* One irq for all channels */ -squ: dma-controller@d42a0800 { - compatible = "marvell,pxa910-squ"; - reg = <0xd42a0800 0x100>; - interrupts = <46>; - }; diff --git a/Documentation/devicetree/bindings/dma/mtk-hsdma.txt b/Documentation/devicetree/bindings/dma/mtk-hsdma.txt deleted file mode 100644 index 4bb317359dc696..00000000000000 --- a/Documentation/devicetree/bindings/dma/mtk-hsdma.txt +++ /dev/null @@ -1,33 +0,0 @@ -MediaTek High-Speed DMA Controller -================================== - -This device follows the generic DMA bindings defined in dma/dma.txt. - -Required properties: - -- compatible: Must be one of - "mediatek,mt7622-hsdma": for MT7622 SoC - "mediatek,mt7623-hsdma": for MT7623 SoC -- reg: Should contain the register's base address and length. -- interrupts: Should contain a reference to the interrupt used by this - device. -- clocks: Should be the clock specifiers corresponding to the entry in - clock-names property. -- clock-names: Should contain "hsdma" entries. -- power-domains: Phandle to the power domain that the device is part of -- #dma-cells: The length of the DMA specifier, must be <1>. This one cell - in dmas property of a client device represents the channel - number. -Example: - - hsdma: dma-controller@1b007000 { - compatible = "mediatek,mt7623-hsdma"; - reg = <0 0x1b007000 0 0x1000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>; - clocks = <ðsys CLK_ETHSYS_HSDMA>; - clock-names = "hsdma"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; - #dma-cells = <1>; - }; - -DMA clients must use the format described in dma/dma.txt file. diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml index 03aa067b1229f6..04fc4a99a7cb53 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml @@ -46,6 +46,7 @@ properties: - renesas,dmac-r8a779a0 # R-Car V3U - renesas,dmac-r8a779f0 # R-Car S4-8 - renesas,dmac-r8a779g0 # R-Car V4H + - renesas,dmac-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-dmac # R-Car Gen4 reg: true diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt deleted file mode 100644 index 528df8a0e6d849..00000000000000 --- a/Documentation/devicetree/bindings/fpga/fpga-region.txt +++ /dev/null @@ -1,479 +0,0 @@ -FPGA Region Device Tree Binding - -Alan Tull 2016 - - CONTENTS - - Introduction - - Terminology - - Sequence - - FPGA Region - - Supported Use Models - - Device Tree Examples - - Constraints - - -Introduction -============ - -FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in -the Device Tree. FPGA Regions provide a way to program FPGAs under device tree -control. - -This device tree binding document hits some of the high points of FPGA usage and -attempts to include terminology used by both major FPGA manufacturers. This -document isn't a replacement for any manufacturers specifications for FPGA -usage. - - -Terminology -=========== - -Full Reconfiguration - * The entire FPGA is programmed. - -Partial Reconfiguration (PR) - * A section of an FPGA is reprogrammed while the rest of the FPGA is not - affected. - * Not all FPGA's support PR. - -Partial Reconfiguration Region (PRR) - * Also called a "reconfigurable partition" - * A PRR is a specific section of an FPGA reserved for reconfiguration. - * A base (or static) FPGA image may create a set of PRR's that later may - be independently reprogrammed many times. - * The size and specific location of each PRR is fixed. - * The connections at the edge of each PRR are fixed. The image that is loaded - into a PRR must fit and must use a subset of the region's connections. - * The busses within the FPGA are split such that each region gets its own - branch that may be gated independently. - -Persona - * Also called a "partial bit stream" - * An FPGA image that is designed to be loaded into a PRR. There may be - any number of personas designed to fit into a PRR, but only one at at time - may be loaded. - * A persona may create more regions. - -FPGA Bridge - * FPGA Bridges gate bus signals between a host and FPGA. - * FPGA Bridges should be disabled while the FPGA is being programmed to - prevent spurious signals on the cpu bus and to the soft logic. - * FPGA bridges may be actual hardware or soft logic on an FPGA. - * During Full Reconfiguration, hardware bridges between the host and FPGA - will be disabled. - * During Partial Reconfiguration of a specific region, that region's bridge - will be used to gate the busses. Traffic to other regions is not affected. - * In some implementations, the FPGA Manager transparently handles gating the - buses, eliminating the need to show the hardware FPGA bridges in the - device tree. - * An FPGA image may create a set of reprogrammable regions, each having its - own bridge and its own split of the busses in the FPGA. - -FPGA Manager - * An FPGA Manager is a hardware block that programs an FPGA under the control - of a host processor. - -Base Image - * Also called the "static image" - * An FPGA image that is designed to do full reconfiguration of the FPGA. - * A base image may set up a set of partial reconfiguration regions that may - later be reprogrammed. - - ---------------- ---------------------------------- - | Host CPU | | FPGA | - | | | | - | ----| | ----------- -------- | - | | H | | |==>| Bridge0 |<==>| PRR0 | | - | | W | | | ----------- -------- | - | | | | | | - | | B |<=====>|<==| ----------- -------- | - | | R | | |==>| Bridge1 |<==>| PRR1 | | - | | I | | | ----------- -------- | - | | D | | | | - | | G | | | ----------- -------- | - | | E | | |==>| Bridge2 |<==>| PRR2 | | - | ----| | ----------- -------- | - | | | | - ---------------- ---------------------------------- - -Figure 1: An FPGA set up with a base image that created three regions. Each -region (PRR0-2) gets its own split of the busses that is independently gated by -a soft logic bridge (Bridge0-2) in the FPGA. The contents of each PRR can be -reprogrammed independently while the rest of the system continues to function. - - -Sequence -======== - -When a DT overlay that targets an FPGA Region is applied, the FPGA Region will -do the following: - - 1. Disable appropriate FPGA bridges. - 2. Program the FPGA using the FPGA manager. - 3. Enable the FPGA bridges. - 4. The Device Tree overlay is accepted into the live tree. - 5. Child devices are populated. - -When the overlay is removed, the child nodes will be removed and the FPGA Region -will disable the bridges. - - -FPGA Region -=========== - -FPGA Regions represent FPGA's and FPGA PR regions in the device tree. An FPGA -Region brings together the elements needed to program on a running system and -add the child devices: - - * FPGA Manager - * FPGA Bridges - * image-specific information needed to to the programming. - * child nodes - -The intended use is that a Device Tree overlay (DTO) can be used to reprogram an -FPGA while an operating system is running. - -An FPGA Region that exists in the live Device Tree reflects the current state. -If the live tree shows a "firmware-name" property or child nodes under an FPGA -Region, the FPGA already has been programmed. A DTO that targets an FPGA Region -and adds the "firmware-name" property is taken as a request to reprogram the -FPGA. After reprogramming is successful, the overlay is accepted into the live -tree. - -The base FPGA Region in the device tree represents the FPGA and supports full -reconfiguration. It must include a phandle to an FPGA Manager. The base -FPGA region will be the child of one of the hardware bridges (the bridge that -allows register access) between the cpu and the FPGA. If there are more than -one bridge to control during FPGA programming, the region will also contain a -list of phandles to the additional hardware FPGA Bridges. - -For partial reconfiguration (PR), each PR region will have an FPGA Region. -These FPGA regions are children of FPGA bridges which are then children of the -base FPGA region. The "Full Reconfiguration to add PRR's" example below shows -this. - -If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA -Manager specified by its ancestor FPGA Region. This supports both the case -where the same FPGA Manager is used for all of an FPGA as well the case where -a different FPGA Manager is used for each region. - -FPGA Regions do not inherit their ancestor FPGA regions' bridges. This prevents -shutting down bridges that are upstream from the other active regions while one -region is getting reconfigured (see Figure 1 above). During PR, the FPGA's -hardware bridges remain enabled. The PR regions' bridges will be FPGA bridges -within the static image of the FPGA. - -Required properties: -- compatible : should contain "fpga-region" -- fpga-mgr : should contain a phandle to an FPGA Manager. Child FPGA Regions - inherit this property from their ancestor regions. An fpga-mgr property - in a region will override any inherited FPGA manager. -- #address-cells, #size-cells, ranges : must be present to handle address space - mapping for child nodes. - -Optional properties: -- firmware-name : should contain the name of an FPGA image file located on the - firmware search path. If this property shows up in a live device tree - it indicates that the FPGA has already been programmed with this image. - If this property is in an overlay targeting an FPGA region, it is a - request to program the FPGA with that image. -- fpga-bridges : should contain a list of phandles to FPGA Bridges that must be - controlled during FPGA programming along with the parent FPGA bridge. - This property is optional if the FPGA Manager handles the bridges. - If the fpga-region is the child of an fpga-bridge, the list should not - contain the parent bridge. -- partial-fpga-config : boolean, set if partial reconfiguration is to be done, - otherwise full reconfiguration is done. -- external-fpga-config : boolean, set if the FPGA has already been configured - prior to OS boot up. -- encrypted-fpga-config : boolean, set if the bitstream is encrypted -- region-unfreeze-timeout-us : The maximum time in microseconds to wait for - bridges to successfully become enabled after the region has been - programmed. -- region-freeze-timeout-us : The maximum time in microseconds to wait for - bridges to successfully become disabled before the region has been - programmed. -- config-complete-timeout-us : The maximum time in microseconds time for the - FPGA to go to operating mode after the region has been programmed. -- child nodes : devices in the FPGA after programming. - -In the example below, when an overlay is applied targeting fpga-region0, -fpga_mgr is used to program the FPGA. Two bridges are controlled during -programming: the parent fpga_bridge0 and fpga_bridge1. Because the region is -the child of fpga_bridge0, only fpga_bridge1 needs to be specified in the -fpga-bridges property. During programming, these bridges are disabled, the -firmware specified in the overlay is loaded to the FPGA using the FPGA manager -specified in the region. If FPGA programming succeeds, the bridges are -reenabled and the overlay makes it into the live device tree. The child devices -are then populated. If FPGA programming fails, the bridges are left disabled -and the overlay is rejected. The overlay's ranges property maps the lwhps -bridge's region (0xff200000) and the hps bridge's region (0xc0000000) for use by -the two child devices. - -Example: -Base tree contains: - - fpga_mgr: fpga-mgr@ff706000 { - compatible = "altr,socfpga-fpga-mgr"; - reg = <0xff706000 0x1000 - 0xffb90000 0x20>; - interrupts = <0 175 4>; - }; - - fpga_bridge0: fpga-bridge@ff400000 { - compatible = "altr,socfpga-lwhps2fpga-bridge"; - reg = <0xff400000 0x100000>; - resets = <&rst LWHPS2FPGA_RESET>; - clocks = <&l4_main_clk>; - - #address-cells = <1>; - #size-cells = <1>; - ranges; - - fpga_region0: fpga-region0 { - compatible = "fpga-region"; - fpga-mgr = <&fpga_mgr>; - }; - }; - - fpga_bridge1: fpga-bridge@ff500000 { - compatible = "altr,socfpga-hps2fpga-bridge"; - reg = <0xff500000 0x10000>; - resets = <&rst HPS2FPGA_RESET>; - clocks = <&l4_main_clk>; - }; - -Overlay contains: - -/dts-v1/; -/plugin/; - -&fpga_region0 { - #address-cells = <1>; - #size-cells = <1>; - - firmware-name = "soc_system.rbf"; - fpga-bridges = <&fpga_bridge1>; - ranges = <0x20000 0xff200000 0x100000>, - <0x0 0xc0000000 0x20000000>; - - gpio@10040 { - compatible = "altr,pio-1.0"; - reg = <0x10040 0x20>; - altr,ngpio = <4>; - #gpio-cells = <2>; - clocks = <2>; - gpio-controller; - }; - - onchip-memory { - device_type = "memory"; - compatible = "altr,onchipmem-15.1"; - reg = <0x0 0x10000>; - }; -}; - - -Supported Use Models -==================== - -In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and -a FPGA Region. The target of the Device Tree Overlay is the FPGA Region. Some -uses are specific to an FPGA device. - - * No FPGA Bridges - In this case, the FPGA Manager which programs the FPGA also handles the - bridges behind the scenes. No FPGA Bridge devices are needed for full - reconfiguration. - - * Full reconfiguration with hardware bridges - In this case, there are hardware bridges between the processor and FPGA that - need to be controlled during full reconfiguration. Before the overlay is - applied, the live DT must include the FPGA Manager, FPGA Bridges, and a - FPGA Region. The FPGA Region is the child of the bridge that allows - register access to the FPGA. Additional bridges may be listed in a - fpga-bridges property in the FPGA region or in the device tree overlay. - - * Partial reconfiguration with bridges in the FPGA - In this case, the FPGA will have one or more PRR's that may be programmed - separately while the rest of the FPGA can remain active. To manage this, - bridges need to exist in the FPGA that can gate the buses going to each FPGA - region while the buses are enabled for other sections. Before any partial - reconfiguration can be done, a base FPGA image must be loaded which includes - PRR's with FPGA bridges. The device tree should have an FPGA region for each - PRR. - -Device Tree Examples -==================== - -The intention of this section is to give some simple examples, focusing on -the placement of the elements detailed above, especially: - * FPGA Manager - * FPGA Bridges - * FPGA Region - * ranges - * target-path or target - -For the purposes of this section, I'm dividing the Device Tree into two parts, -each with its own requirements. The two parts are: - * The live DT prior to the overlay being added - * The DT overlay - -The live Device Tree must contain an FPGA Region, an FPGA Manager, and any FPGA -Bridges. The FPGA Region's "fpga-mgr" property specifies the manager by phandle -to handle programming the FPGA. If the FPGA Region is the child of another FPGA -Region, the parent's FPGA Manager is used. If FPGA Bridges need to be involved, -they are specified in the FPGA Region by the "fpga-bridges" property. During -FPGA programming, the FPGA Region will disable the bridges that are in its -"fpga-bridges" list and will re-enable them after FPGA programming has -succeeded. - -The Device Tree Overlay will contain: - * "target-path" or "target" - The insertion point where the contents of the overlay will go into the - live tree. target-path is a full path, while target is a phandle. - * "ranges" - The address space mapping from processor to FPGA bus(ses). - * "firmware-name" - Specifies the name of the FPGA image file on the firmware search - path. The search path is described in the firmware class documentation. - * "partial-fpga-config" - This binding is a boolean and should be present if partial reconfiguration - is to be done. - * child nodes corresponding to hardware that will be loaded in this region of - the FPGA. - -Device Tree Example: Full Reconfiguration without Bridges -========================================================= - -Live Device Tree contains: - fpga_mgr0: fpga-mgr@f8007000 { - compatible = "xlnx,zynq-devcfg-1.0"; - reg = <0xf8007000 0x100>; - interrupt-parent = <&intc>; - interrupts = <0 8 4>; - clocks = <&clkc 12>; - clock-names = "ref_clk"; - syscon = <&slcr>; - }; - - fpga_region0: fpga-region0 { - compatible = "fpga-region"; - fpga-mgr = <&fpga_mgr0>; - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - }; - -DT Overlay contains: - -/dts-v1/; -/plugin/; - -&fpga_region0 { - #address-cells = <1>; - #size-cells = <1>; - - firmware-name = "zynq-gpio.bin"; - - gpio1: gpio@40000000 { - compatible = "xlnx,xps-gpio-1.00.a"; - reg = <0x40000000 0x10000>; - gpio-controller; - #gpio-cells = <0x2>; - xlnx,gpio-width= <0x6>; - }; -}; - -Device Tree Example: Full Reconfiguration to add PRR's -====================================================== - -The base FPGA Region is specified similar to the first example above. - -This example programs the FPGA to have two regions that can later be partially -configured. Each region has its own bridge in the FPGA fabric. - -DT Overlay contains: - -/dts-v1/; -/plugin/; - -&fpga_region0 { - #address-cells = <1>; - #size-cells = <1>; - - firmware-name = "base.rbf"; - - fpga-bridge@4400 { - compatible = "altr,freeze-bridge-controller"; - reg = <0x4400 0x10>; - - fpga_region1: fpga-region1 { - compatible = "fpga-region"; - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - }; - }; - - fpga-bridge@4420 { - compatible = "altr,freeze-bridge-controller"; - reg = <0x4420 0x10>; - - fpga_region2: fpga-region2 { - compatible = "fpga-region"; - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - }; - }; -}; - -Device Tree Example: Partial Reconfiguration -============================================ - -This example reprograms one of the PRR's set up in the previous example. - -The sequence that occurs when this overlay is similar to the above, the only -differences are that the FPGA is partially reconfigured due to the -"partial-fpga-config" boolean and the only bridge that is controlled during -programming is the FPGA based bridge of fpga_region1. - -/dts-v1/; -/plugin/; - -&fpga_region1 { - #address-cells = <1>; - #size-cells = <1>; - - firmware-name = "soc_image2.rbf"; - partial-fpga-config; - - gpio@10040 { - compatible = "altr,pio-1.0"; - reg = <0x10040 0x20>; - clocks = <0x2>; - altr,ngpio = <0x4>; - #gpio-cells = <0x2>; - gpio-controller; - }; -}; - -Constraints -=========== - -It is beyond the scope of this document to fully describe all the FPGA design -constraints required to make partial reconfiguration work[1] [2] [3], but a few -deserve quick mention. - -A persona must have boundary connections that line up with those of the partition -or region it is designed to go into. - -During programming, transactions through those connections must be stopped and -the connections must be held at a fixed logic level. This can be achieved by -FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration. - --- -[1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf -[2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf -[3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.yaml b/Documentation/devicetree/bindings/fpga/fpga-region.yaml new file mode 100644 index 00000000000000..77554885a6c49e --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/fpga-region.yaml @@ -0,0 +1,358 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/fpga-region.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FPGA Region + +maintainers: + - Michal Simek <michal.simek@amd.com> + +description: | + CONTENTS + - Introduction + - Terminology + - Sequence + - FPGA Region + - Supported Use Models + - Constraints + + + Introduction + ============ + + FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in + the Device Tree. FPGA Regions provide a way to program FPGAs under device tree + control. + + The documentation hits some of the high points of FPGA usage and + attempts to include terminology used by both major FPGA manufacturers. This + document isn't a replacement for any manufacturers specifications for FPGA + usage. + + + Terminology + =========== + + Full Reconfiguration + * The entire FPGA is programmed. + + Partial Reconfiguration (PR) + * A section of an FPGA is reprogrammed while the rest of the FPGA is not + affected. + * Not all FPGA's support PR. + + Partial Reconfiguration Region (PRR) + * Also called a "reconfigurable partition" + * A PRR is a specific section of an FPGA reserved for reconfiguration. + * A base (or static) FPGA image may create a set of PRR's that later may + be independently reprogrammed many times. + * The size and specific location of each PRR is fixed. + * The connections at the edge of each PRR are fixed. The image that is loaded + into a PRR must fit and must use a subset of the region's connections. + * The busses within the FPGA are split such that each region gets its own + branch that may be gated independently. + + Persona + * Also called a "partial bit stream" + * An FPGA image that is designed to be loaded into a PRR. There may be + any number of personas designed to fit into a PRR, but only one at a time + may be loaded. + * A persona may create more regions. + + FPGA Bridge + * FPGA Bridges gate bus signals between a host and FPGA. + * FPGA Bridges should be disabled while the FPGA is being programmed to + prevent spurious signals on the cpu bus and to the soft logic. + * FPGA bridges may be actual hardware or soft logic on an FPGA. + * During Full Reconfiguration, hardware bridges between the host and FPGA + will be disabled. + * During Partial Reconfiguration of a specific region, that region's bridge + will be used to gate the busses. Traffic to other regions is not affected. + * In some implementations, the FPGA Manager transparently handles gating the + buses, eliminating the need to show the hardware FPGA bridges in the + device tree. + * An FPGA image may create a set of reprogrammable regions, each having its + own bridge and its own split of the busses in the FPGA. + + FPGA Manager + * An FPGA Manager is a hardware block that programs an FPGA under the control + of a host processor. + + Base Image + * Also called the "static image" + * An FPGA image that is designed to do full reconfiguration of the FPGA. + * A base image may set up a set of partial reconfiguration regions that may + later be reprogrammed. + + ---------------- ---------------------------------- + | Host CPU | | FPGA | + | | | | + | ----| | ----------- -------- | + | | H | | |==>| Bridge0 |<==>| PRR0 | | + | | W | | | ----------- -------- | + | | | | | | + | | B |<=====>|<==| ----------- -------- | + | | R | | |==>| Bridge1 |<==>| PRR1 | | + | | I | | | ----------- -------- | + | | D | | | | + | | G | | | ----------- -------- | + | | E | | |==>| Bridge2 |<==>| PRR2 | | + | ----| | ----------- -------- | + | | | | + ---------------- ---------------------------------- + + Figure 1: An FPGA set up with a base image that created three regions. Each + region (PRR0-2) gets its own split of the busses that is independently gated by + a soft logic bridge (Bridge0-2) in the FPGA. The contents of each PRR can be + reprogrammed independently while the rest of the system continues to function. + + + Sequence + ======== + + When a DT overlay that targets an FPGA Region is applied, the FPGA Region will + do the following: + + 1. Disable appropriate FPGA bridges. + 2. Program the FPGA using the FPGA manager. + 3. Enable the FPGA bridges. + 4. The Device Tree overlay is accepted into the live tree. + 5. Child devices are populated. + + When the overlay is removed, the child nodes will be removed and the FPGA Region + will disable the bridges. + + + FPGA Region + =========== + + FPGA Regions represent FPGA's and FPGA PR regions in the device tree. An FPGA + Region brings together the elements needed to program on a running system and + add the child devices: + + * FPGA Manager + * FPGA Bridges + * image-specific information needed to the programming. + * child nodes + + The intended use is that a Device Tree overlay (DTO) can be used to reprogram an + FPGA while an operating system is running. + + An FPGA Region that exists in the live Device Tree reflects the current state. + If the live tree shows a "firmware-name" property or child nodes under an FPGA + Region, the FPGA already has been programmed. A DTO that targets an FPGA Region + and adds the "firmware-name" property is taken as a request to reprogram the + FPGA. After reprogramming is successful, the overlay is accepted into the live + tree. + + The base FPGA Region in the device tree represents the FPGA and supports full + reconfiguration. It must include a phandle to an FPGA Manager. The base + FPGA region will be the child of one of the hardware bridges (the bridge that + allows register access) between the cpu and the FPGA. If there are more than + one bridge to control during FPGA programming, the region will also contain a + list of phandles to the additional hardware FPGA Bridges. + + For partial reconfiguration (PR), each PR region will have an FPGA Region. + These FPGA regions are children of FPGA bridges which are then children of the + base FPGA region. The "Full Reconfiguration to add PRR's" example below shows + this. + + If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA + Manager specified by its ancestor FPGA Region. This supports both the case + where the same FPGA Manager is used for all of an FPGA as well the case where + a different FPGA Manager is used for each region. + + FPGA Regions do not inherit their ancestor FPGA regions' bridges. This prevents + shutting down bridges that are upstream from the other active regions while one + region is getting reconfigured (see Figure 1 above). During PR, the FPGA's + hardware bridges remain enabled. The PR regions' bridges will be FPGA bridges + within the static image of the FPGA. + + + Supported Use Models + ==================== + + In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and + a FPGA Region. The target of the Device Tree Overlay is the FPGA Region. Some + uses are specific to an FPGA device. + + * No FPGA Bridges + In this case, the FPGA Manager which programs the FPGA also handles the + bridges behind the scenes. No FPGA Bridge devices are needed for full + reconfiguration. + + * Full reconfiguration with hardware bridges + In this case, there are hardware bridges between the processor and FPGA that + need to be controlled during full reconfiguration. Before the overlay is + applied, the live DT must include the FPGA Manager, FPGA Bridges, and a + FPGA Region. The FPGA Region is the child of the bridge that allows + register access to the FPGA. Additional bridges may be listed in a + fpga-bridges property in the FPGA region or in the device tree overlay. + + * Partial reconfiguration with bridges in the FPGA + In this case, the FPGA will have one or more PRR's that may be programmed + separately while the rest of the FPGA can remain active. To manage this, + bridges need to exist in the FPGA that can gate the buses going to each FPGA + region while the buses are enabled for other sections. Before any partial + reconfiguration can be done, a base FPGA image must be loaded which includes + PRR's with FPGA bridges. The device tree should have an FPGA region for each + PRR. + + Constraints + =========== + + It is beyond the scope of this document to fully describe all the FPGA design + constraints required to make partial reconfiguration work[1] [2] [3], but a few + deserve quick mention. + + A persona must have boundary connections that line up with those of the partition + or region it is designed to go into. + + During programming, transactions through those connections must be stopped and + the connections must be held at a fixed logic level. This can be achieved by + FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration. + + -- + [1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf + [2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf + [3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf + +properties: + $nodename: + pattern: "^fpga-region(@.*|-([0-9]|[1-9][0-9]+))?$" + + compatible: + const: fpga-region + + reg: + maxItems: 1 + + ranges: true + "#address-cells": true + "#size-cells": true + + config-complete-timeout-us: + description: + The maximum time in microseconds time for the FPGA to go to operating + mode after the region has been programmed. + + encrypted-fpga-config: + type: boolean + description: + Set if the bitstream is encrypted. + + external-fpga-config: + type: boolean + description: + Set if the FPGA has already been configured prior to OS boot up. + + firmware-name: + maxItems: 1 + description: + Should contain the name of an FPGA image file located on the firmware + search path. If this property shows up in a live device tree it indicates + that the FPGA has already been programmed with this image. + If this property is in an overlay targeting an FPGA region, it is + a request to program the FPGA with that image. + + fpga-bridges: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should contain a list of phandles to FPGA Bridges that must be + controlled during FPGA programming along with the parent FPGA bridge. + This property is optional if the FPGA Manager handles the bridges. + If the fpga-region is the child of an fpga-bridge, the list should not + contain the parent bridge. + + fpga-mgr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Should contain a phandle to an FPGA Manager. Child FPGA Regions + inherit this property from their ancestor regions. An fpga-mgr property + in a region will override any inherited FPGA manager. + + partial-fpga-config: + type: boolean + description: + Set if partial reconfiguration is to be done, otherwise full + reconfiguration is done. + + region-freeze-timeout-us: + description: + The maximum time in microseconds to wait for bridges to successfully + become disabled before the region has been programmed. + + region-unfreeze-timeout-us: + description: + The maximum time in microseconds to wait for bridges to successfully + become enabled after the region has been programmed. + +required: + - compatible + - fpga-mgr + +additionalProperties: + type: object + +examples: + - | + /* + * Full Reconfiguration without Bridges with DT overlay + */ + fpga_region0: fpga-region@0 { + compatible = "fpga-region"; + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + fpga-mgr = <&fpga_mgr0>; + ranges = <0x10000000 0x20000000 0x10000000>; + + /* DT Overlay contains: &fpga_region0 */ + firmware-name = "zynq-gpio.bin"; + gpio@40000000 { + compatible = "xlnx,xps-gpio-1.00.a"; + reg = <0x40000000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + - | + /* + * Partial reconfiguration with bridge + */ + fpga_region1: fpga-region@0 { + compatible = "fpga-region"; + reg = <0 0>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + fpga-mgr = <&fpga_mgr1>; + fpga-bridges = <&fpga_bridge1>; + partial-fpga-config; + + /* DT Overlay contains: &fpga_region1 */ + firmware-name = "zynq-gpio-partial.bin"; + clk: clock { + compatible = "fixed-factor-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + gpio@40000000 { + compatible = "xlnx,xps-gpio-1.00.a"; + reg = <0x40000000 0x10000>; + #gpio-cells = <2>; + gpio-controller; + clocks = <&clk>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml new file mode 100644 index 00000000000000..cf11aa7ec8c7be --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed GPIO controller + +maintainers: + - Andrew Jeffery <andrew@codeconstruct.com.au> + +properties: + compatible: + enum: + - aspeed,ast2400-gpio + - aspeed,ast2500-gpio + - aspeed,ast2600-gpio + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: The clock to use for debounce timings + + gpio-controller: true + gpio-line-names: + minItems: 36 + maxItems: 232 + + gpio-ranges: true + + "#gpio-cells": + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + ngpios: + minimum: 36 + maximum: 232 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - gpio-controller + - "#gpio-cells" + +allOf: + - if: + properties: + compatible: + contains: + const: aspeed,ast2400-gpio + then: + properties: + gpio-line-names: + minItems: 220 + maxItems: 220 + ngpios: + const: 220 + - if: + properties: + compatible: + contains: + const: aspeed,ast2500-gpio + then: + properties: + gpio-line-names: + minItems: 232 + maxItems: 232 + ngpios: + const: 232 + - if: + properties: + compatible: + contains: + const: aspeed,ast2600-gpio + then: + properties: + gpio-line-names: + minItems: 36 + maxItems: 208 + ngpios: + enum: [ 36, 208 ] + required: + - ngpios + +additionalProperties: false + +examples: + - | + gpio@1e780000 { + compatible = "aspeed,ast2400-gpio"; + reg = <0x1e780000 0x1000>; + interrupts = <20>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + - | + gpio: gpio@1e780000 { + compatible = "aspeed,ast2500-gpio"; + reg = <0x1e780000 0x200>; + interrupts = <20>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 232>; + }; + - | + #include <dt-bindings/clock/ast2600-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + gpio0: gpio@1e780000 { + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780000 0x400>; + clocks = <&syscon ASPEED_CLK_APB2>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 208>; + ngpios = <208>; + }; + gpio1: gpio@1e780800 { + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780800 0x800>; + clocks = <&syscon ASPEED_CLK_APB1>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 208 36>; + ngpios = <36>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt index 6e81f8b755c596..d543fd1b8b23e8 100644 --- a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt @@ -1,7 +1,6 @@ Gateworks PLD GPIO controller bindings -The GPIO controller should be a child node on an I2C bus, -see: i2c/i2c.txt for details. +The GPIO controller should be a child node on an I2C bus. Required properties: - compatible: Should be "gateworks,pld-gpio" diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt deleted file mode 100644 index b2033fc3a71a6e..00000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt +++ /dev/null @@ -1,39 +0,0 @@ -Aspeed GPIO controller Device Tree Bindings -------------------------------------------- - -Required properties: -- compatible : Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio", - or "aspeed,ast2600-gpio". - -- #gpio-cells : Should be two - - First cell is the GPIO line number - - Second cell is used to specify optional - parameters (unused) - -- reg : Address and length of the register set for the device -- gpio-controller : Marks the device node as a GPIO controller. -- interrupts : Interrupt specifier (see interrupt bindings for - details) -- interrupt-controller : Mark the GPIO controller as an interrupt-controller - -Optional properties: - -- clocks : A phandle to the clock to use for debounce timings -- ngpios : Number of GPIOs controlled by this controller. Should be set - when there are multiple GPIO controllers on a SoC (ast2600). - -The gpio and interrupt properties are further described in their respective -bindings documentation: - -- Documentation/devicetree/bindings/gpio/gpio.txt -- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - Example: - gpio@1e780000 { - #gpio-cells = <2>; - compatible = "aspeed,ast2400-gpio"; - gpio-controller; - interrupts = <20>; - reg = <0x1e780000 0x1000>; - interrupt-controller; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml index f1bd1e6b2e1f8d..33d4e4716516d5 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml @@ -115,7 +115,7 @@ allOf: required: - reg -unevaluatedProperties: true +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt deleted file mode 100644 index 8315ac7780ef96..00000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt +++ /dev/null @@ -1,31 +0,0 @@ -Nomadik GPIO controller - -Required properties: -- compatible : Should be "st,nomadik-gpio". -- reg : Physical base address and length of the controller's registers. -- interrupts : The interrupt outputs from the controller. -- #gpio-cells : Should be two: - The first cell is the pin number. - The second cell is used to specify optional parameters: - - bits[3:0] trigger type and level flags: - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. -- gpio-controller : Marks the device node as a GPIO controller. -- interrupt-controller : Marks the device node as an interrupt controller. -- gpio-bank : Specifies which bank a controller owns. -- st,supports-sleepmode : Specifies whether controller can sleep or not - -Example: - - gpio1: gpio@8012e080 { - compatible = "st,nomadik-gpio"; - reg = <0x8012e080 0x80>; - interrupts = <0 120 0x4>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - st,supports-sleepmode; - gpio-bank = <1>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml index 452f8972a96590..6f73961001b75e 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml @@ -28,6 +28,9 @@ properties: minItems: 4 maxItems: 8 + label: + description: A descriptive name for this device. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml index 9cf6137dd52413..65155bb701a9fb 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml @@ -9,7 +9,7 @@ title: Marvell PXA GPIO controller maintainers: - Linus Walleij <linus.walleij@linaro.org> - Bartosz Golaszewski <bgolaszewski@baylibre.com> - - Rob Herring <robh+dt@kernel.org> + - Rob Herring <robh@kernel.org> allOf: - if: diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml index aa424e2b95f87a..cc7a950a603099 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml @@ -53,6 +53,7 @@ properties: - renesas,gpio-r8a779a0 # R-Car V3U - renesas,gpio-r8a779f0 # R-Car S4-8 - renesas,gpio-r8a779g0 # R-Car V4H + - renesas,gpio-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-gpio # R-Car Gen4 reg: diff --git a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml new file mode 100644 index 00000000000000..38d37d8f7201b1 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/st,nomadik-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nomadik GPIO controller + +description: + The Nomadik GPIO driver handles Nomadik SoC GPIO blocks. This block has also + been called ST STA2X11. On the Nomadik platform, this driver is intertwined + with pinctrl-nomadik. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + enum: + - st,nomadik-gpio + - mobileye,eyeq5-gpio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#gpio-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + gpio-bank: + description: System-wide GPIO bank index. + $ref: /schemas/types.yaml#/definitions/uint32 + + st,supports-sleepmode: + description: Whether the controller can sleep or not. + $ref: /schemas/types.yaml#/definitions/flag + + clocks: + maxItems: 1 + + gpio-ranges: + maxItems: 1 + + ngpios: + minimum: 0 + maximum: 32 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - "#gpio-cells" + - gpio-controller + - interrupt-controller + - gpio-bank + +unevaluatedProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: mobileye,eyeq5-gpio + then: + properties: + st,supports-sleepmode: false + +examples: + - | + gpio@8012e080 { + compatible = "st,nomadik-gpio"; + reg = <0x8012e080 0x80>; + interrupts = <0 120 0x4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + st,supports-sleepmode; + gpio-bank = <1>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml index 2e45364d05438d..be7e9e91a3a8c3 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml @@ -46,7 +46,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml index ab87f51c5aefe8..b680612949642f 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml @@ -33,10 +33,6 @@ properties: reg: maxItems: 1 - shunt-resistor-micro-ohms: - description: - Shunt resistor value in micro-Ohm. - adi,volt-curr-sample-average: description: | Number of samples to be used to report voltage and current values. @@ -50,6 +46,7 @@ properties: enum: [1, 2, 4, 8, 16, 32, 64, 128] allOf: + - $ref: hwmon-common.yaml# - if: properties: compatible: @@ -107,7 +104,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml index 5cb66e97e816c6..6401b0a9aff4d2 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml @@ -31,7 +31,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml new file mode 100644 index 00000000000000..4854b95a93e341 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,ltc4282.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C + +maintainers: + - Nuno Sa <nuno.sa@analog.com> + +description: | + Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C. + + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf + +properties: + compatible: + enum: + - adi,ltc4282 + + reg: + maxItems: 1 + + vdd-supply: true + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + + adi,rsense-nano-ohms: + description: Value of the sense resistor. + + adi,vin-mode-microvolt: + description: + Selects operating range for the Undervoltage, Overvoltage and Foldback + pins. Also for the ADC. Should be set to the nominal input voltage. + enum: [3300000, 5000000, 12000000, 24000000] + default: 12000000 + + adi,fet-bad-timeout-ms: + description: + From the moment a FET bad conditions is present, this property selects the + wait time/timeout for a FET-bad fault to be signaled. Setting this to 0, + disables FET bad faults to be reported. + default: 255 + maximum: 255 + + adi,overvoltage-dividers: + description: | + Select which dividers to use for VDD Overvoltage detection. Note that + when the internal dividers are used the threshold is referenced to VDD. + The percentages in the datasheet are misleading since the actual values + to look for are in the "Absolute Maximum Ratings" table in the + "Comparator Inputs" section. In there there's a line for each of the 5%, + 10% and 15% settings with the actual min, typical and max tolerances. + $ref: /schemas/types.yaml#/definitions/string + enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent] + default: external + + adi,undervoltage-dividers: + description: | + Select which dividers to use for VDD Overvoltage detection. Note that + when the internal dividers are used the threshold is referenced to VDD. + The percentages in the datasheet are misleading since the actual values + to look for are in the "Absolute Maximum Ratings" table in the + "Comparator Inputs" section. In there there's a line for each of the 5%, + 10% and 15% settings with the actual min, typical and max tolerances. + $ref: /schemas/types.yaml#/definitions/string + enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent] + default: external + + adi,current-limit-sense-microvolt: + description: + The current limit sense voltage of the chip is adjustable between + 12.5mV and 34.4mV in 3.1mV steps. This effectively limits the current + on the load. + enum: [12500, 15625, 18750, 21875, 25000, 28125, 31250, 34375] + default: 25000 + + adi,overcurrent-retry: + description: + If set, enables the chip to auto-retry 256 timer cycles after an + Overcurrent fault. + type: boolean + + adi,overvoltage-retry-disable: + description: + If set, disables the chip to auto-retry 50ms after an Overvoltage fault. + It's enabled by default. + type: boolean + + adi,undervoltage-retry-disable: + description: + If set, disables the chip to auto-retry 50ms after an Undervoltage fault. + It's enabled by default. + type: boolean + + adi,fault-log-enable: + description: + If set, enables the FAULT_LOG and ADC_ALERT_LOG registers to be written + to the EEPROM when a fault bit transitions high and hence, will be + available after a power cycle (the chip loads the contents of + the EE_FAULT_LOG register - the one in EEPROM - into FAULT_LOG at boot). + type: boolean + + adi,gpio1-mode: + description: Defines the function of the Pin. It can indicate that power is + good (PULL the pin low when power is not good) or that power is bad (Go + into high-z when power is not good). + $ref: /schemas/types.yaml#/definitions/string + enum: [power_bad, power_good] + default: power_good + + adi,gpio2-mode: + description: Defines the function of the Pin. It can be set as the input for + the ADC or indicating that the MOSFET is in stress (dissipating power). + $ref: /schemas/types.yaml#/definitions/string + enum: [adc_input, stress_fet] + default: adc_input + + adi,gpio3-monitor-enable: + description: If set, gpio3 is set as input for the ADC instead of gpio2. + type: boolean + +allOf: + - if: + required: + - adi,gpio3-monitor-enable + then: + properties: + adi,gpio2-mode: + const: stress_fet + +required: + - compatible + - reg + - adi,rsense-nano-ohms + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@50 { + compatible = "adi,ltc4282"; + reg = <0x50>; + adi,rsense-nano-ohms = <500>; + + adi,gpio1-mode = "power_good"; + adi,gpio2-mode = "adc_input"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml b/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml new file mode 100644 index 00000000000000..17351fdbefce6c --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/amphenol,chipcap2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChipCap 2 humidity and temperature iio sensor + +maintainers: + - Javier Carrasco <javier.carrasco.cruz@gmail.com> + +description: | + Relative humidity and temperature sensor on I2C bus. + + Datasheets: + https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2 + +properties: + compatible: + oneOf: + - const: amphenol,cc2d23 + - items: + - enum: + - amphenol,cc2d23s + - amphenol,cc2d25 + - amphenol,cc2d25s + - amphenol,cc2d33 + - amphenol,cc2d33s + - amphenol,cc2d35 + - amphenol,cc2d35s + - const: amphenol,cc2d23 + + reg: + maxItems: 1 + + interrupts: + items: + - description: measurement ready indicator + - description: low humidity alarm + - description: high humidity alarm + + interrupt-names: + items: + - const: ready + - const: low + - const: high + + vdd-supply: + description: + Dedicated, controllable supply-regulator to reset the device and + enter in command mode. + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + humidity@28 { + compatible = "amphenol,cc2d23s", "amphenol,cc2d23"; + reg = <0x28>; + interrupt-parent = <&gpio>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>, + <5 IRQ_TYPE_EDGE_RISING>, + <6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ready", "low", "high"; + vdd-supply = <®_vdd>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml new file mode 100644 index 00000000000000..9e5ed901ae54c6 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2023 Aspeed, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED G6 PWM and Fan Tach controller + +maintainers: + - Billy Tsai <billy_tsai@aspeedtech.com> + +description: | + The ASPEED PWM controller can support up to 16 PWM outputs. + The ASPEED Fan Tacho controller can support up to 16 fan tach input. + They are independent hardware blocks, which are different from the + previous version of the ASPEED chip. + +properties: + compatible: + enum: + - aspeed,ast2600-pwm-tach + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#pwm-cells": + const: 3 + +patternProperties: + "^fan-[0-9]+$": + $ref: fan-common.yaml# + unevaluatedProperties: false + required: + - tach-ch + +required: + - reg + - clocks + - resets + - "#pwm-cells" + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + pwm_tach: pwm-tach-controller@1e610000 { + compatible = "aspeed,ast2600-pwm-tach"; + reg = <0x1e610000 0x100>; + clocks = <&syscon ASPEED_CLK_AHB>; + resets = <&syscon ASPEED_RESET_PWM>; + #pwm-cells = <3>; + + fan-0 { + tach-ch = /bits/ 8 <0x0>; + pwms = <&pwm_tach 0 40000 0>; + }; + + fan-1 { + tach-ch = /bits/ 8 <0x1 0x2>; + pwms = <&pwm_tach 1 40000 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/fan-common.yaml b/Documentation/devicetree/bindings/hwmon/fan-common.yaml new file mode 100644 index 00000000000000..0fb7380816994d --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/fan-common.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/fan-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Fan Properties + +maintainers: + - Naresh Solanki <naresh.solanki@9elements.com> + - Billy Tsai <billy_tsai@aspeedtech.com> + +properties: + max-rpm: + description: + Max RPM supported by fan. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 100000 + + min-rpm: + description: + Min RPM supported by fan. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 1000 + + pulses-per-revolution: + description: + The number of pulse from fan sensor per revolution. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 4 + + tach-div: + description: + Divisor for the tach sampling clock, which determines the sensitivity of the tach pin. + $ref: /schemas/types.yaml#/definitions/uint32 + + target-rpm: + description: + The default desired fan speed in RPM. + $ref: /schemas/types.yaml#/definitions/uint32 + + fan-driving-mode: + description: + Select the driving mode of the fan.(DC, PWM and so on) + $ref: /schemas/types.yaml#/definitions/string + enum: [ dc, pwm ] + + pwms: + description: + PWM provider. + maxItems: 1 + + "#cooling-cells": + const: 2 + + cooling-levels: + description: + The control value which correspond to thermal cooling states. + $ref: /schemas/types.yaml#/definitions/uint32-array + + tach-ch: + description: + The tach channel used for the fan. + $ref: /schemas/types.yaml#/definitions/uint8-array + + label: + description: + Optional fan label + + fan-supply: + description: + Power supply for fan. + + reg: + maxItems: 1 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/hwmon/hwmon-common.yaml b/Documentation/devicetree/bindings/hwmon/hwmon-common.yaml new file mode 100644 index 00000000000000..dc86b5c72cf22c --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/hwmon-common.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/hwmon-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hardware Monitoring Devices Common Properties + +maintainers: + - Guenter Roeck <linux@roeck-us.net> + +properties: + label: + description: A descriptive name for this device. + + shunt-resistor-micro-ohms: + description: The value of current sense resistor. + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml index e62aff670478c4..8f0095bb7f6eb2 100644 --- a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml +++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml @@ -25,7 +25,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml index 98ca163d348688..853df9fef6c83e 100644 --- a/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml +++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml @@ -25,15 +25,14 @@ properties: The default is 102.4 volts. type: boolean - shunt-resistor-micro-ohms: - description: - Resistor value micro-ohms. - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml index ed269e428a3d93..29bd7460cc268b 100644 --- a/Documentation/devicetree/bindings/hwmon/lm75.yaml +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml @@ -57,6 +57,7 @@ required: - reg allOf: + - $ref: hwmon-common.yaml# - if: not: properties: @@ -71,7 +72,7 @@ allOf: properties: interrupts: false -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml index 358b262431fc57..e3db642878d403 100644 --- a/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml +++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml @@ -25,6 +25,7 @@ properties: - nuvoton,nct6796 - nuvoton,nct6797 - nuvoton,nct6798 + - nuvoton,nct6799 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml index ded1c115764b67..5c4e52b472ad17 100644 --- a/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml +++ b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml @@ -30,6 +30,23 @@ properties: unconnected(has internal pull-down). type: boolean + interrupts: + maxItems: 1 + + regulators: + type: object + description: + list of regulators provided by this controller. + + properties: + vout: + $ref: /schemas/regulator/regulator.yaml# + type: object + + unevaluatedProperties: false + + additionalProperties: false + required: - compatible - reg @@ -38,6 +55,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -45,5 +63,15 @@ examples: tda38640@40 { compatible = "infineon,tda38640"; reg = <0x40>; + + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvnn_main_cpu0: vout { + regulator-name = "pvnn_main_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml index da8292bc32f517..a20f140dc79a66 100644 --- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml @@ -34,11 +34,26 @@ properties: Shunt (sense) resistor value in micro-Ohms default: 1000 + regulators: + type: object + + properties: + vout: + $ref: /schemas/regulator/regulator.yaml# + type: object + + unevaluatedProperties: false + + additionalProperties: false + required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/hwmon/hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml index 378d1f6aeeb3f5..df86c2c9203753 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml @@ -28,10 +28,14 @@ properties: - ti,ina231 - ti,ina237 - ti,ina238 + - ti,ina260 reg: maxItems: 1 + "#io-channel-cells": + const: 1 + shunt-resistor: description: Shunt resistor value in micro-Ohm. @@ -66,7 +70,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | @@ -77,6 +84,8 @@ examples: power-sensor@44 { compatible = "ti,ina220"; reg = <0x44>; + #io-channel-cells = <1>; + label = "vdd_3v0"; shunt-resistor = <1000>; vs-supply = <&vdd_3v0>; }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index cdd1489e0c54c1..227858e7605876 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -72,7 +72,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml index ebc8d466c1aaba..f58248c29e22cc 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml @@ -35,7 +35,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml index 6adedd3ec399b9..b1c13bab24722f 100644 --- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml @@ -25,7 +25,9 @@ properties: - atmel,sama5d2-i2c - microchip,sam9x60-i2c - items: - - const: microchip,sama7g5-i2c + - enum: + - microchip,sama7g5-i2c + - microchip,sam9x7-i2c - const: microchip,sam9x60-i2c reg: diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml index 2c08f2a7cf1ee2..b813f6d4810c9a 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml @@ -32,7 +32,6 @@ description: | +-------------------------------+ allOf: - - $ref: i2c-mux.yaml - $ref: /schemas/i2c/i2c-controller.yaml# properties: @@ -41,6 +40,8 @@ properties: i2c-parent: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: List of phandles of I2C masters available for selection. The first one will be used as default. diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml index 4656f5112b84e9..54d500be6aaac3 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml @@ -24,6 +24,7 @@ properties: - fsl,imx8qm-lpi2c - fsl,imx8ulp-lpi2c - fsl,imx93-lpi2c + - fsl,imx95-lpi2c - const: fsl,imx7ulp-lpi2c reg: diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml index 70fb69b923c46d..b1d7d14c0be40a 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml @@ -96,6 +96,6 @@ examples: interrupts = <43 2>; interrupt-parent = <&mpic>; clock-frequency = <400000>; - i2c-scl-clk-low-timeout-us = <10000>; + i2c-transfer-timeout-us = <10000>; }; ... diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml index 2d7bb998b0e9d2..9aa0585200c9cd 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml @@ -71,6 +71,23 @@ properties: description: A voltage regulator supplying power to the chip. On PCA9846 the regulator supplies power to VDD2 (core logic) and optionally to VDD1. + maxim,isolate-stuck-channel: + type: boolean + description: Allows to use non faulty channels while a stuck channel is + isolated from the upstream bus. If not set all channels are isolated from + the upstream bus until the fault is cleared. + + maxim,send-flush-out-sequence: + type: boolean + description: Send a flush-out sequence to stuck auxiliary buses + automatically after a stuck channel is being detected. + + maxim,preconnection-wiggle-test-enable: + type: boolean + description: Send a STOP condition to the auxiliary buses when the switch + register activates a channel to detect a stuck high fault. On fault the + channel is isolated from the upstream bus. + required: - compatible - reg @@ -95,6 +112,19 @@ allOf: "#interrupt-cells": false interrupt-controller: false + - if: + not: + properties: + compatible: + contains: + enum: + - maxim,max7357 + then: + properties: + maxim,isolate-stuck-channel: false + maxim,send-flush-out-sequence: false + maxim,preconnection-wiggle-test-enable: false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml index 31386a8d768454..e89ee361741e8f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Marvell MMP I2C controller maintainers: - - Rob Herring <robh+dt@kernel.org> + - Rob Herring <robh@kernel.org> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt deleted file mode 100644 index fc3dd7ec044504..00000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ /dev/null @@ -1,151 +0,0 @@ -Generic device tree bindings for I2C busses -=========================================== - -This document describes generic bindings which can be used to describe I2C -busses and their child devices in a device tree. - -Required properties (per bus) ------------------------------ - -- #address-cells - should be <1>. Read more about addresses below. -- #size-cells - should be <0>. -- compatible - name of I2C bus controller - -For other required properties e.g. to describe register sets, -clocks, etc. check the binding documentation of the specific driver. - -The cells properties above define that an address of children of an I2C bus -are described by a single value. - -Optional properties (per bus) ------------------------------ - -These properties may not be supported by all drivers. However, if a driver -wants to support one of the below features, it should adapt these bindings. - -- clock-frequency - frequency of bus clock in Hz. - -- i2c-bus - For I2C adapters that have child nodes that are a mixture of both I2C - devices and non-I2C devices, the 'i2c-bus' subnode can be used for - populating I2C devices. If the 'i2c-bus' subnode is present, only - subnodes of this will be considered as I2C slaves. The properties, - '#address-cells' and '#size-cells' must be defined under this subnode - if present. - -- i2c-scl-falling-time-ns - Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C - specification. - -- i2c-scl-internal-delay-ns - Number of nanoseconds the IP core additionally needs to setup SCL. - -- i2c-scl-rising-time-ns - Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C - specification. - -- i2c-sda-falling-time-ns - Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C - specification. - -- i2c-analog-filter - Enable analog filter for i2c lines. - -- i2c-digital-filter - Enable digital filter for i2c lines. - -- i2c-digital-filter-width-ns - Width of spikes which can be filtered by digital filter - (i2c-digital-filter). This width is specified in nanoseconds. - -- i2c-analog-filter-cutoff-frequency - Frequency that the analog filter (i2c-analog-filter) uses to distinguish - which signal to filter. Signal with higher frequency than specified will - be filtered out. Only lower frequency will pass (this is applicable to - a low-pass analog filter). Typical value should be above the normal - i2c bus clock frequency (clock-frequency). - Specified in Hz. - -- multi-master - states that there is another master active on this bus. The OS can use - this information to adapt power management to keep the arbitration awake - all the time, for example. Can not be combined with 'single-master'. - -- pinctrl - add extra pinctrl to configure SCL/SDA pins to GPIO function for bus - recovery, call it "gpio" or "recovery" (deprecated) state - -- scl-gpios - specify the gpio related to SCL pin. Used for GPIO bus recovery. - -- sda-gpios - specify the gpio related to SDA pin. Optional for GPIO bus recovery. - -- single-master - states that there is no other master active on this bus. The OS can use - this information to detect a stalled bus more reliably, for example. - Can not be combined with 'multi-master'. - -- smbus - states that additional SMBus restrictions and features apply to this bus. - An example of feature is SMBusHostNotify. Examples of restrictions are - more reserved addresses and timeout definitions. - -- smbus-alert - states that the optional SMBus-Alert feature apply to this bus. - -- mctp-controller - indicates that the system is accessible via this bus as an endpoint for - MCTP over I2C transport. - -Required properties (per child device) --------------------------------------- - -- compatible - name of I2C slave device - -- reg - One or many I2C slave addresses. These are usually a 7 bit addresses. - However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is - used to mark a 10 bit address. It is needed to avoid the ambiguity - between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050 - which, in theory, can be on the same bus. - Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we - listen to be devices ourselves. - -Optional properties (per child device) --------------------------------------- - -These properties may not be supported by all drivers. However, if a driver -wants to support one of the below features, it should adapt these bindings. - -- host-notify - device uses SMBus host notify protocol instead of interrupt line. - -- interrupts - interrupts used by the device. - -- interrupt-names - "irq", "wakeup" and "smbus_alert" names are recognized by I2C core, - other names are left to individual drivers. - -- reg-names - Names of map programmable addresses. - It can contain any map needing another address than default one. - -- wakeup-source - device can be used as a wakeup source. - -Binding may contain optional "interrupts" property, describing interrupts -used by the device. I2C core will assign "irq" interrupt (or the very first -interrupt if not using interrupt names) as primary interrupt for the slave. - -Alternatively, devices supporting SMBus Host Notify, and connected to -adapters that support this feature, may use "host-notify" property. I2C -core will create a virtual interrupt for Host Notify and assign it as -primary interrupt for the slave. - -Also, if device is marked as a wakeup source, I2C core will set up "wakeup" -interrupt for the device. If "wakeup" interrupt name is not present in the -binding, then primary interrupt will be used as wakeup interrupt. diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml index b8319dcf3d8aec..8676335e9e94bf 100644 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml @@ -21,8 +21,7 @@ description: | See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP binding. - This node represents an I2C controller. See ../i2c/i2c.txt for details - of the core I2C binding. + This node represents an I2C controller. properties: compatible: diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml index c4ace5585e1e22..51b220da461b06 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml @@ -53,6 +53,7 @@ properties: - renesas,i2c-r8a779a0 # R-Car V3U - renesas,i2c-r8a779f0 # R-Car S4-8 - renesas,i2c-r8a779g0 # R-Car V4H + - renesas,i2c-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-i2c # R-Car Gen4 reg: diff --git a/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml b/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml index fcc3dbff9c9a55..47be5d9a32d425 100644 --- a/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml +++ b/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml @@ -57,7 +57,7 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - i3c-master@2000 { + i3c@2000 { compatible = "aspeed,ast2600-i3c"; reg = <0x2000 0x1000>; #address-cells = <3>; diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml index cc40d25358ecfb..cad6d53d0e2e35 100644 --- a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml @@ -41,7 +41,7 @@ unevaluatedProperties: false examples: - | - i3c-master@d040000 { + i3c@d040000 { compatible = "cdns,i3c-master"; clocks = <&coreclock>, <&i3csysclock>; clock-names = "pclk", "sysclk"; diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml index c816e295d5651f..113957ebe9f1df 100644 --- a/Documentation/devicetree/bindings/i3c/i3c.yaml +++ b/Documentation/devicetree/bindings/i3c/i3c.yaml @@ -17,7 +17,7 @@ description: | properties: $nodename: - pattern: "^i3c-master@[0-9a-f]+$" + pattern: "^i3c@[0-9a-f]+$" "#address-cells": const: 3 @@ -71,7 +71,7 @@ patternProperties: description: | I2C child, should be named: <device-type>@<i2c-address> - All properties described in Documentation/devicetree/bindings/i2c/i2c.txt + All properties described in dtschema schemas/i2c/i2c-controller.yaml are valid here, except the reg property whose content is changed. properties: @@ -153,7 +153,7 @@ additionalProperties: true examples: - | - i3c-master@d040000 { + i3c@d040000 { compatible = "cdns,i3c-master"; clocks = <&coreclock>, <&i3csysclock>; clock-names = "pclk", "sysclk"; diff --git a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml index 5dda8cb44cdbc0..39bb1a1784c9bc 100644 --- a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml +++ b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml @@ -43,7 +43,7 @@ unevaluatedProperties: false examples: - | - i3c-master@a0000000 { + i3c@a0000000 { compatible = "mipi-i3c-hci"; reg = <0xa0000000 0x2000>; interrupts = <89>; diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml index 133855f11b4f5d..c56ff77677f170 100644 --- a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml @@ -48,7 +48,7 @@ unevaluatedProperties: false examples: - | - i3c-master@a0000000 { + i3c@a0000000 { compatible = "silvaco,i3c-master-v1"; clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>; clock-names = "pclk", "fast_clk", "slow_clk"; diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml index 7a76fd32962ac7..c0e805e531be23 100644 --- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml @@ -35,7 +35,7 @@ unevaluatedProperties: false examples: - | - i3c-master@2000 { + i3c@2000 { compatible = "snps,dw-i3c-master-1.00a"; #address-cells = <3>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/adc/adc.yaml b/Documentation/devicetree/bindings/iio/adc/adc.yaml index 26160172974569..36775f8f71dfd3 100644 --- a/Documentation/devicetree/bindings/iio/adc/adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adc.yaml @@ -22,7 +22,6 @@ properties: maxItems: 1 label: - $ref: /schemas/types.yaml#/definitions/string description: Unique name to identify which channel this is. bipolar: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml index 7aa748d6b7a027..eecd5fbab69581 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml @@ -44,6 +44,9 @@ properties: Pin that controls the powerdown mode of the device. maxItems: 1 + io-backends: + maxItems: 1 + reset-gpios: description: Reset pin for the device. @@ -68,6 +71,7 @@ examples: reg = <0>; clocks = <&adc_clk>; clock-names = "adc-clk"; + io-backends = <&iio_backend>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml index 9996dd93f84b29..3d49d21ad33df2 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml @@ -39,12 +39,15 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: A reference to a the actual ADC to which this FPGA ADC interfaces to. + deprecated: true + + '#io-backend-cells': + const: 0 required: - compatible - dmas - reg - - adi,adc-dev additionalProperties: false @@ -55,7 +58,6 @@ examples: reg = <0x44a00000 0x10000>; dmas = <&rx_dma 0>; dma-names = "rx"; - - adi,adc-dev = <&spi_adc>; + #io-backend-cells = <0>; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml new file mode 100644 index 00000000000000..47a11a9ac95e27 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PAC1934 Power Monitors with Accumulator + +maintainers: + - Marius Cristea <marius.cristea@microchip.com> + +description: | + This device is part of the Microchip family of Power Monitors with + Accumulator. + The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf + +properties: + compatible: + enum: + - microchip,pac1931 + - microchip,pac1932 + - microchip,pac1933 + - microchip,pac1934 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + interrupts: + maxItems: 1 + + slow-io-gpios: + description: + A GPIO used to trigger a change is sampling rate (lowering the chip power + consumption). If configured in SLOW mode, if this pin is forced high, + sampling rate is forced to eight samples/second. When it is forced low, + the sampling rate is 1024 samples/second unless a different sample rate + has been programmed. + +patternProperties: + "^channel@[1-4]+$": + type: object + $ref: adc.yaml + description: + Represents the external channels which are connected to the ADC. + + properties: + reg: + items: + minimum: 1 + maximum: 4 + + shunt-resistor-micro-ohms: + description: + Value in micro Ohms of the shunt resistor connected between + the SENSE+ and SENSE- inputs, across which the current is measured. + Value is needed to compute the scaling of the measured current. + + required: + - reg + - shunt-resistor-micro-ohms + + unevaluatedProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <24900000>; + label = "CPU"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <49900000>; + label = "GPU"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <75000000>; + label = "MEM"; + bipolar; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <100000000>; + label = "NET"; + bipolar; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml index dacc526dc69533..dfc3f512918f65 100644 --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml @@ -31,7 +31,6 @@ properties: - description: normal conversion, include EOC (End of Conversion), ECH (End of Chain), JEOC (End of Injected Conversion) and JECH (End of injected Chain). - - description: Self-testing Interrupts. clocks: maxItems: 1 @@ -70,8 +69,7 @@ examples: reg = <0x44530000 0x10000>; interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_ADC1_GATE>; clock-names = "ipg"; vref-supply = <®_vref_1v8>; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 40fa0710f1f0f8..c28db0d635a0a8 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -75,7 +75,6 @@ patternProperties: in the PMIC-specific files in include/dt-bindings/iio/. label: - $ref: /schemas/types.yaml#/definitions/string description: | ADC input of the platform as seen in the schematics. For thermistor inputs connected to generic AMUX or GPIO inputs diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml index 88e008629ea89a..af2c3a67f8880e 100644 --- a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml +++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml @@ -25,7 +25,14 @@ description: | properties: compatible: - const: richtek,rtq6056 + oneOf: + - enum: + - richtek,rtq6056 + - richtek,rtq6059 + - items: + - enum: + - richtek,rtq6053 + - const: richtek,rtq6056 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml new file mode 100644 index 00000000000000..bf5a43a81d59c0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments' ads1298 medical ADC chips + +description: | + Datasheet at: https://www.ti.com/product/ADS1298 + Bindings for this chip aren't complete. + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +properties: + compatible: + enum: + - ti,ads1298 + + reg: + maxItems: 1 + + spi-cpha: true + + reset-gpios: + maxItems: 1 + + avdd-supply: + description: + Analog power supply, voltage between AVDD and AVSS. When providing a + symmetric +/- 2.5V, the regulator should report 5V. + + vref-supply: + description: + Optional reference voltage. If omitted, internal reference is used, + which is 2.4V when analog supply is below 4.4V, 4V otherwise. + + clocks: + description: Optional 2.048 MHz external source clock on CLK pin + maxItems: 1 + + interrupts: + description: Interrupt on DRDY pin, triggers on falling edge + maxItems: 1 + + label: true + +required: + - compatible + - reg + - avdd-supply + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@1 { + reg = <1>; + compatible = "ti,ads1298"; + label = "ads1298-1-ecg"; + avdd-supply = <®_iso_5v_a>; + clocks = <&clk_ads1298>; + interrupt-parent = <&gpio0>; + interrupts = <78 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <20000000>; + spi-cpha; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml index dddf97b50549f0..4151f99b42aa79 100644 --- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml +++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml @@ -39,6 +39,17 @@ properties: description: | Channel node of a voltage io-channel. + '#io-channel-cells': + description: + In addition to consuming the measurement services of a voltage + output channel, the voltage divider can act as a provider of + measurement services to other devices. This is particularly + useful in scenarios wherein an ADC has an analog frontend, + such as a voltage divider, and then consuming its raw value + isn't interesting. In this case, the voltage before the divider + is desired. + const: 1 + output-ohms: description: Resistance Rout over which the output voltage is measured. See full-ohms. diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 67de9d4e3a1df6..3a470459b9658b 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -21,6 +21,8 @@ description: | HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf + LTC6373 is a 3-Bit precision instrumentation amplifier with fully differential outputs + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6373.pdf properties: compatible: @@ -28,16 +30,55 @@ properties: - adi,adrf5740 - adi,hmc425a - adi,hmc540s + - adi,ltc6373 vcc-supply: true ctrl-gpios: description: - Must contain an array of 6 GPIO specifiers, referring to the GPIO pins - connected to the control pins V1-V6. - minItems: 6 + Must contain an array of GPIO specifiers, referring to the GPIO pins + connected to the control pins. + ADRF5740 - 4 GPIO connected to D2-D5 + HMC540S - 4 GPIO connected to V1-V4 + HMC425A - 6 GPIO connected to V1-V6 + LTC6373 - 3 GPIO connected to A0-A2 + minItems: 1 maxItems: 6 +allOf: + - if: + properties: + compatible: + contains: + const: adi,hmc425a + then: + properties: + ctrl-gpios: + minItems: 6 + maxItems: 6 + - if: + properties: + compatible: + contains: + anyOf: + - const: adi,adrf5740 + - const: adi,hmc540s + then: + properties: + ctrl-gpios: + minItems: 4 + maxItems: 4 + - if: + properties: + compatible: + contains: + const: adi,ltc6373 + then: + properties: + ctrl-gpios: + minItems: 3 + maxItems: 3 + required: - compatible - ctrl-gpios diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml new file mode 100644 index 00000000000000..2bcf4bbc12e41f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2024 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adi,admfm2000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADMFM2000 Dual Microwave Down Converter + +maintainers: + - Kim Seer Paller <kimseer.paller@analog.com> + +description: + Dual microwave down converter module with input RF and LO frequency ranges + from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz. + It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down + conversion path. + +properties: + compatible: + enum: + - adi,admfm2000 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-1]$": + type: object + description: Represents a channel of the device. + + additionalProperties: false + + properties: + reg: + description: + The channel number. + minimum: 0 + maximum: 1 + + adi,mixer-mode: + description: + Enable mixer mode for the channel. It downconverts RF between 5 GHz + and 32 GHz to IF between 0.5 GHz and 8 GHz. If not present, the channel + is in direct IF mode which bypasses the mixer and downconverts RF + between 2 GHz and 8 GHz to IF between 0.5 GHz and 8 GHz. + type: boolean + + switch-gpios: + description: | + GPIOs to select the RF path for the channel. The same state of CTRL-A + and CTRL-B GPIOs is not permitted. + CTRL-A CTRL-B CH1 Status CH2 Status + 1 0 Direct IF mode Mixer mode + 0 1 Mixer mode Direct IF mode + + items: + - description: CTRL-A GPIO + - description: CTRL-B GPIO + + attenuation-gpios: + description: | + Choice of attenuation: + DSA-V4 DSA-V3 DSA-V2 DSA-V1 DSA-V0 + 1 1 1 1 1 0 dB + 1 1 1 1 0 -1 dB + 1 1 1 0 1 -2 dB + 1 1 0 1 1 -4 dB + 1 0 1 1 1 -8 dB + 0 1 1 1 1 -16 dB + 0 0 0 0 0 -31 dB + + items: + - description: DSA-V0 GPIO + - description: DSA-V1 GPIO + - description: DSA-V2 GPIO + - description: DSA-V3 GPIO + - description: DSA-V4 GPIO + + required: + - reg + - switch-gpios + - attenuation-gpios + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + converter { + compatible = "adi,admfm2000"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + switch-gpios = <&gpio 1 GPIO_ACTIVE_LOW>, + <&gpio 2 GPIO_ACTIVE_HIGH>; + + attenuation-gpios = <&gpio 17 GPIO_ACTIVE_LOW>, + <&gpio 22 GPIO_ACTIVE_LOW>, + <&gpio 23 GPIO_ACTIVE_LOW>, + <&gpio 24 GPIO_ACTIVE_LOW>, + <&gpio 25 GPIO_ACTIVE_LOW>; + }; + + channel@1 { + reg = <1>; + adi,mixer-mode; + switch-gpios = <&gpio 3 GPIO_ACTIVE_LOW>, + <&gpio 4 GPIO_ACTIVE_HIGH>; + + attenuation-gpios = <&gpio 0 GPIO_ACTIVE_LOW>, + <&gpio 5 GPIO_ACTIVE_LOW>, + <&gpio 6 GPIO_ACTIVE_LOW>, + <&gpio 16 GPIO_ACTIVE_LOW>, + <&gpio 26 GPIO_ACTIVE_LOW>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml index 1414ba9977c163..3c6fe74af0b835 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml @@ -22,6 +22,9 @@ properties: vdd-supply: true vddio-supply: true + spi-max-frequency: + maximum: 10000000 + interrupts: minItems: 1 maxItems: 2 @@ -33,7 +36,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml index 79e75a8675cba3..e3eca891751754 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -27,6 +27,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml index 7f6d0f9edc75e3..8b5dedd1a598cf 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml @@ -43,6 +43,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -51,5 +52,7 @@ examples: compatible = "ti,hdc3021", "ti,hdc3020"; reg = <0x47>; vdd-supply = <&vcc_3v3>; + interrupt-parent = <&gpio3>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index 28b667a9cb76b6..c48a96d17f511f 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -35,7 +35,9 @@ properties: - st,lsm6dsv - st,lsm6dso16is - items: - - const: st,asm330lhhx + - enum: + - st,asm330lhhx + - st,asm330lhhxg1 - const: st,lsm6dsr - items: - const: st,lsm6dstx diff --git a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml index 0e8cd02759b368..062a038aa0ff52 100644 --- a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml +++ b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml @@ -4,19 +4,22 @@ $id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor +title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor and AMS AS7331 UV Sensor maintainers: - Christian Eggers <ceggers@arri.de> description: | - XYZ True Color Sensor with I2C Interface + AMS AS73211 XYZ True Color Sensor with I2C Interface https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df + AMS AS7331 UVA, UVB and UVC Sensor with I2C Interface + https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf properties: compatible: enum: - ams,as73211 + - ams,as7331 reg: description: diff --git a/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml index abee04cd126e41..91c318746bf30a 100644 --- a/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml +++ b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml @@ -21,6 +21,7 @@ properties: required: - compatible - reg + - vdd-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml b/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml new file mode 100644 index 00000000000000..b6ab01a6914ad8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/voltafield,af8133j.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Voltafield AF8133J magnetometer sensor + +maintainers: + - Ondřej Jirman <megi@xff.cz> + +properties: + compatible: + const: voltafield,af8133j + + reg: + maxItems: 1 + + reset-gpios: + description: + A signal for active low reset input of the sensor. (optional; if not + used, software reset over I2C will be used instead) + + avdd-supply: + description: + A regulator that provides AVDD power (Working power, usually 3.3V) to + the sensor. + + dvdd-supply: + description: + A regulator that provides DVDD power (Digital IO power, 1.8V - AVDD) + to the sensor. + + mount-matrix: + description: An optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@1c { + compatible = "voltafield,af8133j"; + reg = <0x1c>; + avdd-supply = <®_dldo1>; + dvdd-supply = <®_dldo1>; + reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml index 65a24ed67b3ccd..89977b9f01cfe1 100644 --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml @@ -99,6 +99,9 @@ required: - honeywell,transfer-function - honeywell,pressure-triplet +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + additionalProperties: false dependentSchemas: diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml index d9e903fbfd99ea..6994b30015bdb6 100644 --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -8,25 +8,28 @@ title: Honeywell mprls0025pa pressure sensor maintainers: - Andreas Klinger <ak@it-klinger.de> + - Petre Rodan <petre.rodan@subdimension.ro> description: | Honeywell pressure sensor of model mprls0025pa. - This sensor has an I2C and SPI interface. Only the I2C interface is - implemented. + This sensor has an I2C and SPI interface. There are many models with different pressure ranges available. The vendor calls them "mpr series". All of them have the identical programming model and differ in the pressure range, unit and transfer function. - To support different models one need to specify the pressure range as well as - the transfer function. Pressure range needs to be converted from its unit to - pascal. + To support different models one need to specify its pressure triplet as well + as the transfer function. + + For custom silicon chips not covered by the Honeywell MPR series datasheet, + the pressure values can be specified manually via honeywell,pmin-pascal and + honeywell,pmax-pascal. + The minimal range value stands for the minimum pressure and the maximum value + also for the maximum pressure with linear relation inside the range. The transfer function defines the ranges of numerical values delivered by the - sensor. The minimal range value stands for the minimum pressure and the - maximum value also for the maximum pressure with linear relation inside the - range. + sensor. Specifications about the devices can be found at: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/ @@ -42,6 +45,10 @@ properties: maxItems: 1 interrupts: + description: + Optional interrupt for indicating End-of-conversion. + If not present, the driver loops for a while until the received status + byte indicates correct measurement. maxItems: 1 reset-gpios: @@ -50,14 +57,6 @@ properties: If not present the device is not reset during the probe. maxItems: 1 - honeywell,pmin-pascal: - description: - Minimum pressure value the sensor can measure in pascal. - - honeywell,pmax-pascal: - description: - Maximum pressure value the sensor can measure in pascal. - honeywell,transfer-function: description: | Transfer function which defines the range of valid values delivered by the @@ -65,19 +64,57 @@ properties: 1 - A, 10% to 90% of 2^24 (1677722 .. 15099494) 2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874) 3 - C, 20% to 80% of 2^24 (3355443 .. 13421773) + enum: [1, 2, 3] $ref: /schemas/types.yaml#/definitions/uint32 + honeywell,pressure-triplet: + description: | + Case-sensitive five character string that defines pressure range, unit + and type as part of the device nomenclature. In the unlikely case of a + custom chip, unset and provide pmin-pascal and pmax-pascal instead. + enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG, + 0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG, + 0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG, + 0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG] + $ref: /schemas/types.yaml#/definitions/string + + honeywell,pmin-pascal: + description: + Minimum pressure value the sensor can measure in pascal. + + honeywell,pmax-pascal: + description: + Maximum pressure value the sensor can measure in pascal. + + spi-max-frequency: + maximum: 800000 + vdd-supply: description: provide VDD power to the sensor. required: - compatible - reg - - honeywell,pmin-pascal - - honeywell,pmax-pascal - honeywell,transfer-function - vdd-supply +oneOf: + - required: + - honeywell,pressure-triplet + - required: + - honeywell,pmin-pascal + - honeywell,pmax-pascal + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + - if: + required: + - honeywell,pressure-triplet + then: + properties: + honeywell,pmin-pascal: false + honeywell,pmax-pascal: false + additionalProperties: false examples: @@ -93,10 +130,29 @@ examples: reg = <0x18>; reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; interrupt-parent = <&gpio3>; - interrupts = <21 IRQ_TYPE_EDGE_FALLING>; - honeywell,pmin-pascal = <0>; - honeywell,pmax-pascal = <172369>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + honeywell,pressure-triplet = "0025PA"; + honeywell,transfer-function = <1>; + vdd-supply = <&vcc_3v3>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + pressure@0 { + compatible = "honeywell,mprls0025pa"; + reg = <0>; + spi-max-frequency = <800000>; + reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <30 IRQ_TYPE_EDGE_RISING>; + + honeywell,pressure-triplet = "0015PA"; honeywell,transfer-function = <1>; vdd-supply = <&vcc_3v3>; }; }; +... diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml index 8c6d7735e87502..58aa1542776b51 100644 --- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml @@ -24,9 +24,16 @@ properties: reg: maxItems: 1 + vcc-supply: + description: provide VCC power to the sensor. + + label: + description: Unique name to identify which device this is. + required: - compatible - reg + - vcc-supply additionalProperties: false @@ -39,5 +46,6 @@ examples: tmp117@48 { compatible = "ti,tmp117"; reg = <0x48>; + vcc-supply = <&pmic_reg_3v3>; }; }; diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index 5efceb31387917..c384bf0bb25dab 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -49,7 +49,6 @@ patternProperties: $ref: input.yaml# properties: label: - $ref: /schemas/types.yaml#/definitions/string description: Descriptive name of the key linux,code: true diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.txt b/Documentation/devicetree/bindings/input/atmel,captouch.txt deleted file mode 100644 index fe9ee5c53bccea..00000000000000 --- a/Documentation/devicetree/bindings/input/atmel,captouch.txt +++ /dev/null @@ -1,36 +0,0 @@ -Device tree bindings for Atmel capacitive touch device, typically -an Atmel touch sensor connected to AtmegaXX MCU running firmware -based on Qtouch library. - -The node for this device must be a child of a I2C controller node, as the -device communicates via I2C. - -Required properties: - - compatible: Must be "atmel,captouch". - reg: The I2C slave address of the device. - interrupts: Property describing the interrupt line the device - is connected to. The device only has one interrupt - source. - linux,keycodes: Specifies an array of numeric keycode values to - be used for reporting button presses. The array can - contain up to 8 entries. - -Optional properties: - - autorepeat: Enables the Linux input system's autorepeat - feature on the input device. - -Example: - - atmel-captouch@51 { - compatible = "atmel,captouch"; - reg = <0x51>; - interrupt-parent = <&tlmm>; - interrupts = <67 IRQ_TYPE_EDGE_FALLING>; - linux,keycodes = <BTN_0>, <BTN_1>, - <BTN_2>, <BTN_3>, - <BTN_4>, <BTN_5>, - <BTN_6>, <BTN_7>; - autorepeat; - }; diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.yaml b/Documentation/devicetree/bindings/input/atmel,captouch.yaml new file mode 100644 index 00000000000000..f7477091d5a615 --- /dev/null +++ b/Documentation/devicetree/bindings/input/atmel,captouch.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/atmel,captouch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel capacitive touch device + +maintainers: + - Dharma balasubiramani <dharma.b@microchip.com> + +description: + Atmel capacitive touch device, typically an Atmel touch sensor connected to + AtmegaXX MCU running firmware based on Qtouch library. + +allOf: + - $ref: input.yaml# + +properties: + compatible: + const: atmel,captouch + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + linux,keycodes: + minItems: 1 + maxItems: 8 + +required: + - compatible + - reg + - interrupts + - linux,keycodes + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/linux-event-codes.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touch@51 { + compatible = "atmel,captouch"; + reg = <0x51>; + interrupt-parent = <&tlmm>; + interrupts = <67 IRQ_TYPE_EDGE_FALLING>; + linux,keycodes = <BTN_0>, <BTN_1>, + <BTN_2>, <BTN_3>, + <BTN_4>, <BTN_5>, + <BTN_6>, <BTN_7>; + autorepeat; + }; + }; diff --git a/Documentation/devicetree/bindings/input/da9062-onkey.txt b/Documentation/devicetree/bindings/input/da9062-onkey.txt deleted file mode 100644 index e5eef59a93dc57..00000000000000 --- a/Documentation/devicetree/bindings/input/da9062-onkey.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Dialog DA9061/62/63 OnKey Module - -This module is part of the DA9061/DA9062/DA9063. For more details about entire -DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt -For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml - -This module provides the KEY_POWER event. - -Required properties: - -- compatible: should be one of the following valid compatible string lines: - "dlg,da9061-onkey", "dlg,da9062-onkey" - "dlg,da9062-onkey" - "dlg,da9063-onkey" - -Optional properties: - -- dlg,disable-key-power : Disable power-down using a long key-press. If this - entry exists the OnKey driver will remove support for the KEY_POWER key - press when triggered using a long press of the OnKey. - -Example: DA9063 - - pmic0: da9063@58 { - onkey { - compatible = "dlg,da9063-onkey"; - dlg,disable-key-power; - }; - }; - -Example: DA9062 - - pmic0: da9062@58 { - onkey { - compatible = "dlg,da9062-onkey"; - dlg,disable-key-power; - }; - }; - -Example: DA9061 using a fall-back compatible for the DA9062 onkey driver - - pmic0: da9061@58 { - onkey { - compatible = "dlg,da9061-onkey", "dlg,da9062-onkey"; - dlg,disable-key-power; - }; - }; diff --git a/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml new file mode 100644 index 00000000000000..1480d95421e187 --- /dev/null +++ b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/dlg,da9062-onkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9061/62/63 OnKey Module + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This module is part of the DA9061/DA9062/DA9063. For more details about entire + DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml + + This module provides the KEY_POWER event. + +properties: + compatible: + oneOf: + - enum: + - dlg,da9062-onkey + - dlg,da9063-onkey + - items: + - const: dlg,da9061-onkey + - const: dlg,da9062-onkey + + dlg,disable-key-power: + type: boolean + description: + Disable power-down using a long key-press. If this entry exists + the OnKey driver will remove support for the KEY_POWER key press + when triggered using a long press of the OnKey. + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml b/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml new file mode 100644 index 00000000000000..a53569aa0ee774 --- /dev/null +++ b/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/samsung,s3c6410-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC series Keypad Controller + +description: + Samsung SoC Keypad controller is used to interface a SoC with a matrix-type + keypad device. The keypad controller supports multiple row and column lines. + A key can be placed at each intersection of a unique row and a unique column. + The keypad controller can sense a key-press and key-release and report the + event using a interrupt to the cpu. + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,s3c6410-keypad + - samsung,s5pv210-keypad + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: keypad + + interrupts: + maxItems: 1 + + wakeup-source: true + + linux,input-no-autorepeat: + type: boolean + description: + Do no enable autorepeat feature. + + linux,input-wakeup: + type: boolean + deprecated: true + + samsung,keypad-num-columns: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of column lines connected to the keypad controller. + + samsung,keypad-num-rows: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of row lines connected to the keypad controller. + +patternProperties: + '^key-[0-9a-z]+$': + type: object + $ref: input.yaml# + additionalProperties: false + description: + Each key connected to the keypad controller is represented as a child + node to the keypad controller device node. + + properties: + keypad,column: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The column number to which the key is connected. + + keypad,row: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The row number to which the key is connected. + + linux,code: true + + required: + - keypad,column + - keypad,row + - linux,code + +required: + - compatible + - reg + - interrupts + - samsung,keypad-num-columns + - samsung,keypad-num-rows + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + keypad@100a0000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0x100a0000 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_KEYIF>; + clock-names = "keypad"; + + samsung,keypad-num-rows = <2>; + samsung,keypad-num-columns = <8>; + linux,input-no-autorepeat; + wakeup-source; + + key-1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <2>; + }; + + key-2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt deleted file mode 100644 index 4c5c0a82586d40..00000000000000 --- a/Documentation/devicetree/bindings/input/samsung-keypad.txt +++ /dev/null @@ -1,77 +0,0 @@ -* Samsung's Keypad Controller device tree bindings - -Samsung's Keypad controller is used to interface a SoC with a matrix-type -keypad device. The keypad controller supports multiple row and column lines. -A key can be placed at each intersection of a unique row and a unique column. -The keypad controller can sense a key-press and key-release and report the -event using a interrupt to the cpu. - -Required SoC Specific Properties: -- compatible: should be one of the following - - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad - controller. - - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad - controller. - -- reg: physical base address of the controller and length of memory mapped - region. - -- interrupts: The interrupt number to the cpu. - -Required Board Specific Properties: -- samsung,keypad-num-rows: Number of row lines connected to the keypad - controller. - -- samsung,keypad-num-columns: Number of column lines connected to the - keypad controller. - -- Keys represented as child nodes: Each key connected to the keypad - controller is represented as a child node to the keypad controller - device node and should include the following properties. - - keypad,row: the row number to which the key is connected. - - keypad,column: the column number to which the key is connected. - - linux,code: the key-code to be reported when the key is pressed - and released. - -- pinctrl-0: Should specify pin control groups used for this controller. -- pinctrl-names: Should contain only one value - "default". - -Optional Properties: -- wakeup-source: use any event on keypad as wakeup event. - (Legacy property supported: "linux,input-wakeup") - -Optional Properties specific to linux: -- linux,keypad-no-autorepeat: do no enable autorepeat feature. - - -Example: - keypad@100a0000 { - compatible = "samsung,s5pv210-keypad"; - reg = <0x100A0000 0x100>; - interrupts = <173>; - samsung,keypad-num-rows = <2>; - samsung,keypad-num-columns = <8>; - linux,input-no-autorepeat; - wakeup-source; - - pinctrl-names = "default"; - pinctrl-0 = <&keypad_rows &keypad_columns>; - - key_1 { - keypad,row = <0>; - keypad,column = <3>; - linux,code = <2>; - }; - - key_2 { - keypad,row = <0>; - keypad,column = <4>; - linux,code = <3>; - }; - - key_3 { - keypad,row = <0>; - keypad,column = <5>; - linux,code = <4>; - }; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml new file mode 100644 index 00000000000000..678756ad0f929a --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/fsl,imx6ul-tsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6UL Touch Controller + +maintainers: + - Haibo Chen <haibo.chen@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + +properties: + compatible: + const: fsl,imx6ul-tsc + + reg: + items: + - description: touch controller address + - description: ADC2 address + + interrupts: + items: + - description: touch controller address + - description: ADC2 address + + clocks: + maxItems: 2 + + clock-names: + items: + - const: tsc + - const: adc + + xnur-gpios: + maxItems: 1 + description: + The X- gpio this controller connect to. This xnur-gpio returns to + low once the finger leave the touch screen (The last touch event + the touch controller capture). + + measure-delay-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The value of measure delay time. Before X-axis or Y-axis measurement, + the screen need some time before even potential distribution ready. + default: 0xffff + minimum: 0 + maximum: 0xffffff + + pre-charge-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The touch screen need some time to precharge. + default: 0xfff + minimum: 0 + maximum: 0xffffffff + + touchscreen-average-samples: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of data samples which are averaged for each read. + enum: [ 1, 4, 8, 16, 32 ] + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - xnur-gpios + +allOf: + - $ref: touchscreen.yaml# + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx6ul-clock.h> + #include <dt-bindings/gpio/gpio.h> + touchscreen@2040000 { + compatible = "fsl,imx6ul-tsc"; + reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_ADC2>; + clock-names = "tsc", "adc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xfff>; + pre-charge-time = <0xffff>; + touchscreen-average-samples = <32>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml new file mode 100644 index 00000000000000..d90f045ac06c89 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Goodix Berlin series touchscreen controller + +description: The Goodix Berlin series of touchscreen controllers + be connected to either I2C or SPI buses. + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: touchscreen.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - goodix,gt9916 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + avdd-supply: + description: Analog power supply regulator on AVDD pin + + vddio-supply: + description: power supply regulator on VDDIO pin + + spi-max-frequency: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - avdd-supply + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@5d { + compatible = "goodix,gt9916"; + reg = <0x5d>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + avdd-supply = <&ts_avdd>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + avdd-supply = <&ts_avdd>; + spi-max-frequency = <1000000>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index 3d016b87c8df86..2a2d86cfd10487 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -37,8 +37,9 @@ properties: maxItems: 1 irq-gpios: - description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin - as output to reset the device. + description: GPIO pin used for IRQ input. Additionally, this line is + sampled by the device on reset deassertion to select the I2C client + address, thus it can be driven by the host during the reset sequence. maxItems: 1 reset-gpios: diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml index 0d6b033fd5fbc2..77ba280b3bdcc5 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml @@ -9,15 +9,14 @@ title: Imagis IST30XXC family touchscreen controller maintainers: - Markuss Broks <markuss.broks@gmail.com> -allOf: - - $ref: touchscreen.yaml# - properties: $nodename: pattern: "^touchscreen@[0-9a-f]+$" compatible: enum: + - imagis,ist3032c + - imagis,ist3038b - imagis,ist3038c reg: @@ -32,6 +31,10 @@ properties: vddio-supply: description: Power supply regulator for the I2C bus + linux,keycodes: + description: Keycodes for the touch keys + maxItems: 5 + touchscreen-size-x: true touchscreen-size-y: true touchscreen-fuzz-x: true @@ -42,6 +45,18 @@ properties: additionalProperties: false +allOf: + - $ref: touchscreen.yaml# + - if: + not: + properties: + compatible: + contains: + const: imagis,ist3032c + then: + properties: + linux,keycodes: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt deleted file mode 100644 index 16491500442447..00000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Freescale i.MX6UL Touch Controller - -Required properties: -- compatible: must be "fsl,imx6ul-tsc". -- reg: this touch controller address and the ADC2 address. -- interrupts: the interrupt of this touch controller and ADC2. -- clocks: the root clock of touch controller and ADC2. -- clock-names; must be "tsc" and "adc". -- xnur-gpio: the X- gpio this controller connect to. - This xnur-gpio returns to low once the finger leave the touch screen (The - last touch event the touch controller capture). - -Optional properties: -- measure-delay-time: the value of measure delay time. - Before X-axis or Y-axis measurement, the screen need some time before - even potential distribution ready. - This value depends on the touch screen. -- pre-charge-time: the touch screen need some time to precharge. - This value depends on the touch screen. -- touchscreen-average-samples: Number of data samples which are averaged for - each read. Valid values are 1, 4, 8, 16 and 32. - -Example: - tsc: tsc@2040000 { - compatible = "fsl,imx6ul-tsc"; - reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_IPG>, - <&clks IMX6UL_CLK_ADC2>; - clock-names = "tsc", "adc"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tsc>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; - measure-delay-time = <0xfff>; - pre-charge-time = <0xffff>; - touchscreen-average-samples = <32>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml index 07f9dd6b1c9c44..90ebd4f8354c27 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml @@ -17,13 +17,17 @@ properties: pattern: "^touchscreen(@.*)?$" compatible: - items: + oneOf: - enum: - melfas,mms114 - melfas,mms134s - melfas,mms136 - melfas,mms152 - melfas,mms345l + - items: + - enum: + - melfas,mms252 + - const: melfas,mms114 reg: description: I2C address diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml index 95b554be25b407..5381a96f494998 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml @@ -31,7 +31,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: > File basename for board specific firmware diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml index 08c1c6b9d7cf8d..5aaa92a7cef7c2 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml @@ -23,6 +23,9 @@ properties: compatible: enum: + - qcom,msm8909-bimc + - qcom,msm8909-pcnoc + - qcom,msm8909-snoc - qcom,msm8916-bimc - qcom,msm8916-pcnoc - qcom,msm8916-snoc diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index 74ab080249ff89..9318b845ec359b 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -8,7 +8,7 @@ title: Qualcomm RPMh Network-On-Chip Interconnect maintainers: - Georgi Djakov <georgi.djakov@linaro.org> - - Odelu Kukatla <okukatla@codeaurora.org> + - Odelu Kukatla <quic_okukatla@quicinc.com> description: | RPMh interconnect providers support system bandwidth requirements through diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml new file mode 100644 index 00000000000000..b565d1a382f65f --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sm7150-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on SM7150 + +maintainers: + - Danila Tikhonov <danila@jiaxyga.com> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). + + See also:: include/dt-bindings/interconnect/qcom,sm7150-rpmh.h + +allOf: + - $ref: qcom,rpmh-common.yaml# + +properties: + compatible: + enum: + - qcom,sm7150-aggre1-noc + - qcom,sm7150-aggre2-noc + - qcom,sm7150-compute-noc + - qcom,sm7150-config-noc + - qcom,sm7150-dc-noc + - qcom,sm7150-gem-noc + - qcom,sm7150-mc-virt + - qcom,sm7150-mmss-noc + - qcom,sm7150-system-noc + + reg: + maxItems: 1 + +# Child node's properties +patternProperties: + '^interconnect-[0-9]+$': + type: object + description: + The interconnect providers do not have a separate QoS register space, + but share parent's space. + + allOf: + - $ref: qcom,rpmh-common.yaml# + + properties: + compatible: + enum: + - qcom,sm7150-camnoc-virt + + required: + - compatible + + unevaluatedProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mc_virt: interconnect@1380000 { + compatible = "qcom,sm7150-mc-virt"; + reg = <0x01380000 0x40000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm7150-system-noc"; + reg = <0x01620000 0x40000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + camnoc_virt: interconnect-0 { + compatible = "qcom,sm7150-camnoc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt deleted file mode 100644 index 7079d44bf3bad8..00000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Advanced Interrupt Controller (AIC) - -Required properties: -- compatible: Should be: - - "atmel,<chip>-aic" where <chip> can be "at91rm9200", "sama5d2", - "sama5d3" or "sama5d4" - - "microchip,<chip>-aic" where <chip> can be "sam9x60" - -- interrupt-controller: Identifies the node as an interrupt controller. -- #interrupt-cells: The number of cells to define the interrupts. It should be 3. - The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet). - The second cell is used to specify flags: - bits[3:0] trigger type and level flags: - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. - Valid combinations are 1, 2, 3, 4, 8. - Default flag for internal sources should be set to 4 (active high). - The third cell is used to specify the irq priority from 0 (lowest) to 7 - (highest). -- reg: Should contain AIC registers location and length -- atmel,external-irqs: u32 array of external irqs. - -Examples: - /* - * AIC - */ - aic: interrupt-controller@fffff000 { - compatible = "atmel,at91rm9200-aic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0xfffff000 0x200>; - }; - - /* - * An interrupt generating device that is wired to an AIC. - */ - dma: dma-controller@ffffec00 { - compatible = "atmel,at91sam9g45-dma"; - reg = <0xffffec00 0x200>; - interrupts = <21 4 5>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.yaml new file mode 100644 index 00000000000000..d4658fe3867cab --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/atmel,aic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Advanced Interrupt Controller (AIC) + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Dharma balasubiramani <dharma.b@microchip.com> + +description: + The Advanced Interrupt Controller (AIC) is an 8-level priority, individually + maskable, vectored interrupt controller providing handling of up to one + hundred and twenty-eight interrupt sources. + +properties: + compatible: + enum: + - atmel,at91rm9200-aic + - atmel,sama5d2-aic + - atmel,sama5d3-aic + - atmel,sama5d4-aic + - microchip,sam9x60-aic + + reg: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 3 + description: | + The 1st cell is the IRQ number (Peripheral IDentifier on datasheet). + The 2nd cell specifies flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + Valid combinations: 1, 2, 3, 4, 8. + Default for internal sources: 4 (active high). + The 3rd cell specifies irq priority from 0 (lowest) to 7 (highest). + + interrupts: + maxItems: 1 + + atmel,external-irqs: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: u32 array of external irqs. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + - if: + properties: + compatible: + contains: + const: atmel,at91rm9200-aic + then: + properties: + atmel,external-irqs: + minItems: 1 + maxItems: 7 + else: + properties: + atmel,external-irqs: + minItems: 1 + maxItems: 1 + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - atmel,external-irqs + +unevaluatedProperties: false + +examples: + - | + interrupt-controller@fffff000 { + compatible = "atmel,at91rm9200-aic"; + reg = <0xfffff000 0x200>; + interrupt-controller; + #interrupt-cells = <3>; + atmel,external-irqs = <31>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml index 985bfa4f6fda13..78baa0a571cf7f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml @@ -37,6 +37,9 @@ properties: clock-names: const: ipg + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml new file mode 100644 index 00000000000000..e1a379c052e44c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mt6577-sysirq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek sysirq + +description: + MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI + interrupt. + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +properties: + compatible: + oneOf: + - const: mediatek,mt6577-sysirq + - items: + - enum: + - mediatek,mt2701-sysirq + - mediatek,mt2712-sysirq + - mediatek,mt6580-sysirq + - mediatek,mt6582-sysirq + - mediatek,mt6589-sysirq + - mediatek,mt6592-sysirq + - mediatek,mt6755-sysirq + - mediatek,mt6765-sysirq + - mediatek,mt6779-sysirq + - mediatek,mt6795-sysirq + - mediatek,mt6797-sysirq + - mediatek,mt7622-sysirq + - mediatek,mt7623-sysirq + - mediatek,mt7629-sysirq + - mediatek,mt8127-sysirq + - mediatek,mt8135-sysirq + - mediatek,mt8173-sysirq + - mediatek,mt8183-sysirq + - mediatek,mt8365-sysirq + - mediatek,mt8516-sysirq + - const: mediatek,mt6577-sysirq + + reg: + minItems: 1 + maxItems: 2 + + interrupt-controller: true + + "#interrupt-cells": + $ref: "arm,gic.yaml#/properties/#interrupt-cells" + +required: + - reg + - interrupt-controller + - "#interrupt-cells" + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + - if: + properties: + compatible: + contains: + const: mediatek,mt6797-sysirq + then: + properties: + reg: + minItems: 2 + else: + properties: + reg: + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + interrupt-controller@10200620 { + compatible = "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq"; + reg = <0x10220620 0x20>, + <0x10220690 0x10>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt deleted file mode 100644 index 3ffc60184e445d..00000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt +++ /dev/null @@ -1,44 +0,0 @@ -MediaTek sysirq - -MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI -interrupt. - -Required properties: -- compatible: should be - "mediatek,mt8516-sysirq", "mediatek,mt6577-sysirq": for MT8516 - "mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183 - "mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173 - "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135 - "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127 - "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622 - "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623 - "mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629 - "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795 - "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797 - "mediatek,mt6779-sysirq", "mediatek,mt6577-sysirq": for MT6779 - "mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765 - "mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755 - "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592 - "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589 - "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582 - "mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580 - "mediatek,mt6577-sysirq": for MT6577 - "mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712 - "mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701 - "mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq": for MT8365 -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt. -- reg: Physical base address of the intpol registers and length of memory - mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others - need 1. - -Example: - sysirq: intpol-controller@10200620 { - compatible = "mediatek,mt6797-sysirq", - "mediatek,mt6577-sysirq"; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - reg = <0 0x10220620 0 0x20>, - <0 0x10220690 0 0x10>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml index d3b5aec0a3f74d..daef4ee06f4ed6 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml @@ -44,7 +44,7 @@ properties: maxItems: 1 interrupts: - minItems: 41 + minItems: 45 items: - description: NMI interrupt - description: IRQ0 interrupt @@ -88,9 +88,15 @@ properties: - description: GPIO interrupt, TINT30 - description: GPIO interrupt, TINT31 - description: Bus error interrupt + - description: ECCRAM0 or combined ECCRAM0/1 1bit error interrupt + - description: ECCRAM0 or combined ECCRAM0/1 2bit error interrupt + - description: ECCRAM0 or combined ECCRAM0/1 error overflow interrupt + - description: ECCRAM1 1bit error interrupt + - description: ECCRAM1 2bit error interrupt + - description: ECCRAM1 error overflow interrupt interrupt-names: - minItems: 41 + minItems: 45 items: - const: nmi - const: irq0 @@ -134,6 +140,12 @@ properties: - const: tint30 - const: tint31 - const: bus-err + - const: ec7tie1-0 + - const: ec7tie2-0 + - const: ec7tiovf-0 + - const: ec7tie1-1 + - const: ec7tie2-1 + - const: ec7tiovf-1 clocks: maxItems: 2 @@ -156,6 +168,7 @@ required: - interrupt-controller - reg - interrupts + - interrupt-names - clocks - clock-names - power-domains @@ -169,16 +182,19 @@ allOf: compatible: contains: enum: - - renesas,r9a07g043u-irqc - renesas,r9a08g045-irqc then: properties: interrupts: - minItems: 42 + maxItems: 45 interrupt-names: - minItems: 42 - required: - - interrupt-names + maxItems: 45 + else: + properties: + interrupts: + minItems: 48 + interrupt-names: + minItems: 48 unevaluatedProperties: false @@ -233,7 +249,14 @@ examples: <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3", "irq4", "irq5", "irq6", "irq7", @@ -244,7 +267,10 @@ examples: "tint16", "tint17", "tint18", "tint19", "tint20", "tint21", "tint22", "tint23", "tint24", "tint25", "tint26", "tint27", - "tint28", "tint29", "tint30", "tint31"; + "tint28", "tint29", "tint30", "tint31", + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1", + "ec7tiovf-1"; clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, <&cpg CPG_MOD R9A07G044_IA55_PCLK>; clock-names = "clk", "pclk"; diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index a4042ae2477024..5c130cf06a2124 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -83,6 +83,7 @@ properties: - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500" items: - enum: + - qcom,qcm2290-smmu-500 - qcom,sa8775p-smmu-500 - qcom,sc7280-smmu-500 - qcom,sc8280xp-smmu-500 @@ -93,6 +94,7 @@ properties: - qcom,sm8350-smmu-500 - qcom,sm8450-smmu-500 - qcom,sm8550-smmu-500 + - qcom,sm8650-smmu-500 - const: qcom,adreno-smmu - const: qcom,smmu-500 - const: arm,mmu-500 @@ -462,6 +464,7 @@ allOf: compatible: items: - enum: + - qcom,qcm2290-smmu-500 - qcom,sm6115-smmu-500 - qcom,sm6125-smmu-500 - const: qcom,adreno-smmu @@ -484,7 +487,12 @@ allOf: - if: properties: compatible: - const: qcom,sm8450-smmu-500 + items: + - const: qcom,sm8450-smmu-500 + - const: qcom,adreno-smmu + - const: qcom,smmu-500 + - const: arm,mmu-500 + then: properties: clock-names: @@ -508,7 +516,13 @@ allOf: - if: properties: compatible: - const: qcom,sm8550-smmu-500 + items: + - enum: + - qcom,sm8550-smmu-500 + - qcom,sm8650-smmu-500 + - const: qcom,adreno-smmu + - const: qcom,smmu-500 + - const: arm,mmu-500 then: properties: clock-names: @@ -534,7 +548,6 @@ allOf: - cavium,smmu-v2 - marvell,ap806-smmu-500 - nvidia,smmu-500 - - qcom,qcm2290-smmu-500 - qcom,qdu1000-smmu-500 - qcom,sc7180-smmu-500 - qcom,sc8180x-smmu-500 @@ -544,7 +557,6 @@ allOf: - qcom,sdx65-smmu-500 - qcom,sm6350-smmu-500 - qcom,sm6375-smmu-500 - - qcom,sm8650-smmu-500 - qcom,x1e80100-smmu-500 then: properties: diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml new file mode 100644 index 00000000000000..b005065e0f48a7 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd2801.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kinetic Technologies KTD2801 one-wire backlight + +maintainers: + - Duje Mihanović <duje.mihanovic@skole.hr> + +description: | + The Kinetic Technologies KTD2801 is a LED backlight driver controlled + by a single GPIO line. The driver can be controlled with a PWM signal + or by pulsing the GPIO line to set the backlight level. This is called + "ExpressWire". + +allOf: + - $ref: common.yaml# + +properties: + compatible: + const: kinetic,ktd2801 + + ctrl-gpios: + maxItems: 1 + + default-brightness: true + max-brightness: true + +required: + - compatible + - ctrl-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight { + compatible = "kinetic,ktd2801"; + ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>; + max-brightness = <210>; + default-brightness = <100>; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml index 5f1849bdabba2f..a8490781011d1b 100644 --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. WLED driver maintainers: - - Bjorn Andersson <bjorn.andersson@linaro.org> - - Kiran Gunda <kgunda@codeaurora.org> + - Bjorn Andersson <andersson@kernel.org> + - Kiran Gunda <quic_kgunda@quicinc.com> description: | WLED (White Light Emitting Diode) driver is used for controlling display diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml index ea84ad426df18e..54a428d3d46ffe 100644 --- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml @@ -11,7 +11,7 @@ maintainers: description: > The Qualcomm Light Pulse Generator consists of three different hardware blocks; - a ramp generator with lookup table, the light pulse generator and a three + a ramp generator with lookup table (LUT), the light pulse generator and a three channel current sink. These blocks are found in a wide range of Qualcomm PMICs. properties: @@ -63,6 +63,29 @@ properties: - description: dtest line to attach - description: flags for the attachment + nvmem: + description: > + This property is required for PMICs that supports PPG, which is when a + PMIC stores LPG per-channel data and pattern LUT in SDAM modules instead + of in a LUT peripheral. For PMICs, such as PM8350C, per-channel data + and pattern LUT is separated into 2 SDAM modules. In that case, phandles + to both SDAM modules need to be specified. + minItems: 1 + maxItems: 2 + + nvmem-names: + minItems: 1 + items: + - const: lpg_chan_sdam + - const: lut_sdam + + qcom,pbs: + $ref: /schemas/types.yaml#/definitions/phandle + description: > + Phandle of the Qualcomm Programmable Boot Sequencer node (PBS). + PBS node is used to trigger LPG pattern sequences for PMICs that support + single SDAM PPG. + multi-led: type: object $ref: leds-class-multicolor.yaml# @@ -106,6 +129,52 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660l-lpg + - qcom,pm8150b-lpg + - qcom,pm8150l-lpg + - qcom,pm8916-pwm + - qcom,pm8941-lpg + - qcom,pm8994-lpg + - qcom,pmc8180c-lpg + - qcom,pmi8994-lpg + - qcom,pmi8998-lpg + - qcom,pmk8550-pwm + then: + properties: + nvmem: false + nvmem-names: false + + - if: + properties: + compatible: + contains: + const: qcom,pmi632-lpg + then: + properties: + nvmem: + maxItems: 1 + nvmem-names: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8350c-pwm + then: + properties: + nvmem: + minItems: 2 + nvmem-names: + minItems: 2 + examples: - | #include <dt-bindings/leds/common.h> @@ -191,4 +260,35 @@ examples: compatible = "qcom,pm8916-pwm"; #pwm-cells = <2>; }; + - | + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "qcom,pmi632-lpg"; + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + nvmem-names = "lpg_chan_sdam"; + nvmem = <&pmi632_sdam_7>; + qcom,pbs = <&pmi632_pbs_client3>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + label = "red"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + label = "green"; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + label = "blue"; + }; + }; + ... diff --git a/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml b/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml new file mode 100644 index 00000000000000..9c9f3a682ba209 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/onnn,ncp5623.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ON Semiconductor NCP5623 multi-LED Driver + +maintainers: + - Abdel Alkuor <alkuor@gmail.com> + +description: + NCP5623 Triple Output I2C Controlled LED Driver. + https://www.onsemi.com/pdf/datasheet/ncp5623-d.pdf + +properties: + compatible: + enum: + - onnn,ncp5623 + + reg: + const: 0x38 + + multi-led: + type: object + $ref: leds-class-multicolor.yaml# + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^led@[0-2]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 2 + + required: + - reg + - color + + required: + - "#address-cells" + - "#size-cells" + +required: + - compatible + - reg + - multi-led + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@38 { + compatible = "onnn,ncp5623"; + reg = <0x38>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml index 12e7a7d536a38f..00631afcd51d82 100644 --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml @@ -29,8 +29,11 @@ properties: - const: fsl,imx8ulp-mu - const: fsl,imx8-mu-scu - const: fsl,imx8-mu-seco - - const: fsl,imx93-mu-s4 - const: fsl,imx8ulp-mu-s4 + - const: fsl,imx93-mu-s4 + - const: fsl,imx95-mu + - const: fsl,imx95-mu-ele + - const: fsl,imx95-mu-v2x - items: - const: fsl,imx93-mu - const: fsl,imx8ulp-mu @@ -95,6 +98,19 @@ properties: power-domains: maxItems: 1 + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +patternProperties: + "^sram@[a-f0-9]+": + $ref: /schemas/sram/sram.yaml# + unevaluatedProperties: false + required: - compatible - reg @@ -122,6 +138,15 @@ allOf: required: - interrupt-names + - if: + not: + properties: + compatible: + const: fsl,imx95-mu + then: + patternProperties: + "^sram@[a-f0-9]+": false + additionalProperties: false examples: @@ -134,3 +159,34 @@ examples: interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; #mbox-cells = <2>; }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox@445b0000 { + compatible = "fsl,imx95-mu"; + reg = <0x445b0000 0x10000>; + ranges; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + #mbox-cells = <2>; + + sram@445b1000 { + compatible = "mmio-sram"; + reg = <0x445b1000 0x400>; + ranges = <0x0 0x445b1000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + scmi-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x80>; + }; + + scmi-sram-section@80 { + compatible = "arm,scmi-shmem"; + reg = <0x80 0x80>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml index e37317f810722d..c9673391afdbde 100644 --- a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml +++ b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml @@ -36,7 +36,7 @@ properties: properties: port@0: - $ref: /schemas/graph.yaml#/$defs/port-base + $ref: /schemas/graph.yaml#/properties/port description: Analog input port properties: diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml index afcaa427d48b09..6be00aca418176 100644 --- a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml @@ -16,6 +16,7 @@ description: | properties: compatible: enum: + - fsl,imx8mp-isp - rockchip,px30-cif-isp - rockchip,rk3399-cif-isp @@ -36,9 +37,9 @@ properties: minItems: 3 items: # isp0 and isp1 - - description: ISP clock - - description: ISP AXI clock - - description: ISP AHB clock + - description: ISP clock (for imx8mp, clk) + - description: ISP AXI clock (for imx8mp, m_hclk) + - description: ISP AHB clock (for imx8mp, hclk) # only for isp1 - description: ISP Pixel clock @@ -52,6 +53,13 @@ properties: # only for isp1 - const: pclk + fsl,blk-ctrl: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + A phandle to the media block control for the ISP, followed by a cell + containing the index of the gasket. + iommus: maxItems: 1 @@ -113,9 +121,6 @@ required: - interrupts - clocks - clock-names - - iommus - - phys - - phy-names - power-domains - ports @@ -143,6 +148,26 @@ allOf: required: - interrupt-names + - if: + properties: + compatible: + contains: + const: fsl,imx8mp-isp + then: + properties: + iommus: false + phys: false + phy-names: false + required: + - fsl,blk-ctrl + else: + properties: + fsl,blk-ctrl: false + required: + - iommus + - phys + - phy-names + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml b/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml new file mode 100644 index 00000000000000..b8611bc8756c48 --- /dev/null +++ b/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/st,stm32mp25-video-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32MP25 VDEC video decoder & VENC video encoder + +maintainers: + - Hugues Fruchet <hugues.fruchet@foss.st.com> + +description: + The STMicroelectronics STM32MP25 SOCs embeds a VDEC video hardware + decoder peripheral based on Verisilicon VC8000NanoD IP (former Hantro G1) + and a VENC video hardware encoder peripheral based on Verisilicon + VC8000NanoE IP (former Hantro H1). + +properties: + compatible: + enum: + - st,stm32mp25-vdec + - st,stm32mp25-venc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + video-codec@580d0000 { + compatible = "st,stm32mp25-vdec"; + reg = <0x580d0000 0x3c8>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ck_icn_p_vdec>; + }; diff --git a/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml new file mode 100644 index 00000000000000..4aa36903e755bb --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel's HLCD Controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Claudiu Beznea <claudiu.beznea@tuxon.dev> + +description: + The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two + subdevices, a PWM chip and a Display Controller. + +properties: + compatible: + enum: + - atmel,at91sam9n12-hlcdc + - atmel,at91sam9x5-hlcdc + - atmel,sama5d2-hlcdc + - atmel,sama5d3-hlcdc + - atmel,sama5d4-hlcdc + - microchip,sam9x60-hlcdc + - microchip,sam9x75-xlcdc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + + clock-names: + items: + - const: periph_clk + - const: sys_clk + - const: slow_clk + - const: lvds_pll_clk + minItems: 3 + + display-controller: + $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml + + pwm: + $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + lcd_controller: lcd-controller@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk", "sys_clk", "slow_clk"; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + + display-controller { + compatible = "atmel,hlcdc-display-controller"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml new file mode 100644 index 00000000000000..0dc6a40b63f476 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Flexcom (Flexible Serial Communication Unit) + +maintainers: + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> + +description: + The Microchip Flexcom is just a wrapper which embeds a SPI controller, + an I2C controller and an USART. Only one function can be used at a + time and is chosen at boot time according to the device tree. + +properties: + compatible: + oneOf: + - const: atmel,sama5d2-flexcom + - items: + - const: microchip,sam9x7-flexcom + - const: atmel,sama5d2-flexcom + - items: + - const: microchip,sama7g5-flexcom + - const: atmel,sama5d2-flexcom + + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + description: + One range for the full I/O register region. (including USART, + TWI and SPI registers). + items: + maxItems: 3 + + atmel,flexcom-mode: + description: | + Specifies the flexcom mode as follows: + 1: USART + 2: SPI + 3: I2C. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3] + +patternProperties: + "^serial@[0-9a-f]+$": + type: object + description: + Child node describing USART. See atmel-usart.txt for details + of USART bindings. + + "^spi@[0-9a-f]+$": + type: object + description: + Child node describing SPI. See ../spi/spi_atmel.txt for details + of SPI bindings. + + "^i2c@[0-9a-f]+$": + $ref: /schemas/i2c/atmel,at91sam-i2c.yaml + description: + Child node describing I2C. + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + - ranges + - atmel,flexcom-mode + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + flx0: flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + atmel,flexcom-mode = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt deleted file mode 100644 index af692e8833a57c..00000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) - -The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C -controller and an USART. Only one function can be used at a time and is chosen -at boot time according to the device tree. - -Required properties: -- compatible: Should be "atmel,sama5d2-flexcom" - or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom" -- reg: Should be the offset/length value for Flexcom dedicated - I/O registers (without USART, TWI or SPI registers). -- clocks: Should be the Flexcom peripheral clock from PMC. -- #address-cells: Should be <1> -- #size-cells: Should be <1> -- ranges: Should be one range for the full I/O register region - (including USART, TWI and SPI registers). -- atmel,flexcom-mode: Should be one of the following values: - - <1> for USART - - <2> for SPI - - <3> for I2C - -Required child: -A single available child device of type matching the "atmel,flexcom-mode" -property. - -The phandle provided by the clocks property of the child is the same as one for -the Flexcom parent. - -For other properties, please refer to the documentations of the respective -device: -- ../serial/atmel-usart.txt -- ../spi/spi_atmel.txt -- ../i2c/i2c-at91.txt - -Example: - -flexcom@f8034000 { - compatible = "atmel,sama5d2-flexcom"; - reg = <0xf8034000 0x200>; - clocks = <&flx0_clk>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xf8034000 0x800>; - atmel,flexcom-mode = <2>; - - spi@400 { - compatible = "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flx0_default>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&flx0_clk>; - clock-names = "spi_clk"; - atmel,fifo-size = <32>; - - flash@0 { - compatible = "atmel,at25f512b"; - reg = <0>; - spi-max-frequency = <20000000>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt deleted file mode 100644 index 7de696eefaed4b..00000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt +++ /dev/null @@ -1,56 +0,0 @@ -Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver - -Required properties: - - compatible: value should be one of the following: - "atmel,at91sam9n12-hlcdc" - "atmel,at91sam9x5-hlcdc" - "atmel,sama5d2-hlcdc" - "atmel,sama5d3-hlcdc" - "atmel,sama5d4-hlcdc" - "microchip,sam9x60-hlcdc" - "microchip,sam9x75-xlcdc" - - reg: base address and size of the HLCDC device registers. - - clock-names: the name of the 3 clocks requested by the HLCDC device. - Should contain "periph_clk", "sys_clk" and "slow_clk". - - clocks: should contain the 3 clocks requested by the HLCDC device. - - interrupts: should contain the description of the HLCDC interrupt line - -The HLCDC IP exposes two subdevices: - - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt - - a Display Controller: see ../display/atmel/hlcdc-dc.txt - -Example: - - hlcdc: hlcdc@f0030000 { - compatible = "atmel,sama5d3-hlcdc"; - reg = <0xf0030000 0x2000>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; - clock-names = "periph_clk","sys_clk", "slow_clk"; - interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - - hlcdc-display-controller { - compatible = "atmel,hlcdc-display-controller"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - hlcdc_panel_output: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; - }; - }; - - hlcdc_pwm: hlcdc-pwm { - compatible = "atmel,hlcdc-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwm>; - #pwm-cells = <3>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt deleted file mode 100644 index e4eedd3bd2332a..00000000000000 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ /dev/null @@ -1,124 +0,0 @@ -* Dialog DA9062 Power Management Integrated Circuit (PMIC) - -Product information for the DA9062 and DA9061 devices can be found here: -- https://www.dialog-semiconductor.com/products/da9062 -- https://www.dialog-semiconductor.com/products/da9061 - -The DA9062 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-rtc : : Real-Time Clock -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal -da9062-gpio : : GPIOs - -The DA9061 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal - -====== - -Required properties: - -- compatible : Should be - "dlg,da9062" for DA9062 - "dlg,da9061" for DA9061 -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be - modified to match the chip's OTP settings). - -Optional properties: - -- gpio-controller : Marks the device as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify the gpio polarity. - -See Documentation/devicetree/bindings/gpio/gpio.txt for further information on -GPIO bindings. - -- interrupts : IRQ line information. -- interrupt-controller - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -further information on IRQ bindings. - -Sub-nodes: - -- regulators : This node defines the settings for the LDOs and BUCKs. - The DA9062 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - buck4 : BUCK_4 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The DA9061 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The component follows the standard regulator framework and the bindings - details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - - regulator-initial-mode may be specified for buck regulators using mode values - from include/dt-bindings/regulator/dlg,da9063-regulator.h. - -- rtc : This node defines settings required for the Real-Time Clock associated - with the DA9062. There are currently no entries in this binding, however - compatible = "dlg,da9062-rtc" should be added if a node is created. - -- onkey : See ../input/da9062-onkey.txt - -- watchdog: See ../watchdog/da9062-wdt.txt - -- thermal : See ../thermal/da9062-thermal.txt - -Example: - - pmic0: da9062@58 { - compatible = "dlg,da9062"; - reg = <0x58>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9062-rtc"; - }; - - regulators { - DA9062_BUCK1: buck1 { - regulator-name = "BUCK1"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <2000000>; - regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; - regulator-boot-on; - }; - DA9062_LDO1: ldo1 { - regulator-name = "LDO_1"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml index c5a7e10d7d80e8..51612dc22748fc 100644 --- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) +title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC) maintainers: - Steve Twiss <stwiss.opensource@diasemi.com> @@ -17,10 +17,17 @@ description: | moment where all voltage monitors are disabled. Next, as da9063 only supports UV *and* OV monitoring, both must be set to the same severity and value (0: disable, 1: enable). + Product information for the DA906{3L,3,2,1} devices can be found here: + - https://www.dialog-semiconductor.com/products/da9063l + - https://www.dialog-semiconductor.com/products/da9063 + - https://www.dialog-semiconductor.com/products/da9062 + - https://www.dialog-semiconductor.com/products/da9061 properties: compatible: enum: + - dlg,da9061 + - dlg,da9062 - dlg,da9063 - dlg,da9063l @@ -35,20 +42,28 @@ properties: "#interrupt-cells": const: 2 - dlg,use-sw-pm: - type: boolean - description: - Disable the watchdog during suspend. - Only use this option if you can't use the watchdog automatic suspend - function during a suspend (see register CONTROL_B). + gpio-controller: true - watchdog: + "#gpio-cells": + const: 2 + + gpio: type: object - $ref: /schemas/watchdog/watchdog.yaml# - unevaluatedProperties: false + additionalProperties: false properties: compatible: - const: dlg,da9063-watchdog + const: dlg,da9062-gpio + + onkey: + $ref: /schemas/input/dlg,da9062-onkey.yaml + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$": + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false rtc: type: object @@ -56,37 +71,86 @@ properties: unevaluatedProperties: false properties: compatible: - const: dlg,da9063-rtc + enum: + - dlg,da9062-rtc + - dlg,da9063-rtc - onkey: - type: object - $ref: /schemas/input/input.yaml# - unevaluatedProperties: false - properties: - compatible: - const: dlg,da9063-onkey + thermal: + $ref: /schemas/thermal/dlg,da9062-thermal.yaml - dlg,disable-key-power: - type: boolean - description: | - Disable power-down using a long key-press. - If this entry does not exist then by default the key-press triggered - power down is enabled and the OnKey will support both KEY_POWER and - KEY_SLEEP. + watchdog: + $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml - regulators: +patternProperties: + "^(.+-hog(-[0-9]+)?)$": type: object - additionalProperties: false - patternProperties: - "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": - $ref: /schemas/regulator/regulator.yaml - unevaluatedProperties: false + + required: + - gpio-hog required: - compatible - reg - - interrupts - - interrupt-controller + +allOf: + - if: + properties: + compatible: + contains: + enum: + - dlg,da9063 + - dlg,da9063l + then: + properties: + gpio-controller: false + "#gpio-cells": false + gpio: false + regulators: + patternProperties: + "^buck[1-4]$": false + thermal: false + required: + - interrupts + - interrupt-controller + - '#interrupt-cells' + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9062 + then: + properties: + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false + required: + - gpio + - onkey + - rtc + - thermal + - watchdog + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9061 + then: + properties: + gpio-controller: false + "#gpio-cells": false + gpio: false + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false + rtc: false + required: + - onkey + - thermal + - watchdog additionalProperties: false @@ -99,10 +163,10 @@ examples: pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - #interrupt-cells = <2>; interrupt-parent = <&gpio6>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; @@ -143,4 +207,121 @@ examples: }; }; }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/dlg,da9063-regulator.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9062"; + reg = <0x58>; + gpio-controller; + #gpio-cells = <2>; + + sd0-pwr-sel-hog { + gpio-hog; + gpios = <1 0>; + input; + line-name = "SD0_PWR_SEL"; + }; + + sd1-pwr-sel-hog { + gpio-hog; + gpios = <2 0>; + input; + line-name = "SD1_PWR_SEL"; + }; + + sw-et0-en-hog { + gpio-hog; + gpios = <3 0>; + input; + line-name = "SW_ET0_EN#"; + }; + + pmic-good-hog { + gpio-hog; + gpios = <4 0>; + output-high; + line-name = "PMIC_PGOOD"; + }; + + gpio { + compatible = "dlg,da9062-gpio"; + }; + + onkey { + compatible = "dlg,da9062-onkey"; + }; + + regulators { + buck1 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck2 { + regulator-name = "vdd_soc"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck3 { + regulator-name = "vdd_ddr3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck4 { + regulator-name = "vdd_eth"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + ldo1 { + regulator-name = "vdd_snvs"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo2 { + regulator-name = "vdd_high"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo3 { + regulator-name = "vdd_eth_io"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + ldo4 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + + rtc { + compatible = "dlg,da9062-rtc"; + }; + + thermal { + compatible = "dlg,da9062-thermal"; + }; + + watchdog { + compatible = "dlg,da9062-watchdog"; + dlg,use-sw-pm; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index e1ca4f297c6d81..aac8819bd00ba4 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -93,6 +93,11 @@ properties: '#size-cells': const: 0 + '#gpio-cells': + const: 2 + + gpio-controller: true + typec: $ref: /schemas/chrome/google,cros-ec-typec.yaml# @@ -275,6 +280,8 @@ examples: interrupts = <99 0>; interrupt-parent = <&gpio7>; spi-max-frequency = <5000000>; + #gpio-cells = <2>; + gpio-controller; proximity { compatible = "google,cros-ec-mkbp-proximity"; diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml index 044cd7542c2bcf..f438c237496639 100644 --- a/Documentation/devicetree/bindings/mfd/iqs62x.yaml +++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml @@ -31,7 +31,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Specifies the name of the calibration and configuration file selected by the driver. If this property is omitted, the name is chosen based on the diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml index 798705ab6a4601..b97d77015335f1 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -19,6 +19,7 @@ properties: - enum: - qcom,msm8976-tcsr - qcom,msm8998-tcsr + - qcom,qcm2290-tcsr - qcom,qcs404-tcsr - qcom,sc7180-tcsr - qcom,sc7280-tcsr @@ -28,6 +29,7 @@ properties: - qcom,sdx55-tcsr - qcom,sdx65-tcsr - qcom,sm4450-tcsr + - qcom,sm6115-tcsr - qcom,sm8150-tcsr - qcom,sm8250-tcsr - qcom,sm8350-tcsr diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 084b5c2a2a3c28..9d55bee155ce9f 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -72,7 +72,10 @@ properties: - rockchip,rk3588-qos - rockchip,rv1126-qos - starfive,jh7100-sysmain + - ti,am62-usb-phy-ctrl - ti,am654-dss-oldi-io-ctrl + - ti,am654-serdes-ctrl + - ti,j784s4-pcie-ctrl - const: syscon diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml index c04d57ba22b49f..52ed228fb1e7ed 100644 --- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml @@ -34,6 +34,8 @@ properties: interrupt-controller: true + system-power-controller: true + "#interrupt-cells": const: 1 diff --git a/Documentation/devicetree/bindings/mips/cpus.yaml b/Documentation/devicetree/bindings/mips/cpus.yaml index cf382dea3922c9..a85137add66894 100644 --- a/Documentation/devicetree/bindings/mips/cpus.yaml +++ b/Documentation/devicetree/bindings/mips/cpus.yaml @@ -23,22 +23,23 @@ properties: - brcm,bmips4380 - brcm,bmips5000 - brcm,bmips5200 - - ingenic,xburst-mxu1.0 + - img,i6500 - ingenic,xburst-fpu1.0-mxu1.1 - ingenic,xburst-fpu2.0-mxu2.0 + - ingenic,xburst-mxu1.0 - ingenic,xburst2-fpu2.1-mxu2.1-smt - loongson,gs264 - mips,m14Kc - - mips,mips4Kc - - mips,mips4KEc - - mips,mips24Kc + - mips,mips1004Kc - mips,mips24KEc + - mips,mips24Kc + - mips,mips4KEc + - mips,mips4Kc - mips,mips74Kc - - mips,mips1004Kc - mti,interaptiv - - mti,mips24KEc - mti,mips14KEc - mti,mips14Kc + - mti,mips24KEc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mips/mobileye.yaml b/Documentation/devicetree/bindings/mips/mobileye.yaml new file mode 100644 index 00000000000000..831975f6b479f6 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/mobileye.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright 2023 Mobileye Vision Technologies Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mips/mobileye.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mobileye SoC series + +maintainers: + - Vladimir Kondratiev <vladimir.kondratiev@intel.com> + - Gregory CLEMENT <gregory.clement@bootlin.com> + - Théo Lebrun <theo.lebrun@bootlin.com> + +description: + Boards with a Mobileye SoC shall have the following properties. + +properties: + $nodename: + const: '/' + + compatible: + oneOf: + - description: Boards with Mobileye EyeQ5 SoC + items: + - enum: + - mobileye,eyeq5-epm5 + - const: mobileye,eyeq5 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml index 2dc3e245fa5d34..c27a8f33d8d769 100644 --- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml +++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml @@ -77,6 +77,8 @@ patternProperties: reg: maxItems: 1 + dma-coherent: true + iommus: minItems: 1 maxItems: 3 diff --git a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt deleted file mode 100644 index e3289634fa30ea..00000000000000 --- a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Xilinx SDFEC(16nm) IP * - -The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block -which provides high-throughput LDPC and Turbo Code implementations. -The LDPC decode & encode functionality is capable of covering a range of -customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality -principally covers codes used by LTE. The FEC Engine offers significant -power and area savings versus implementations done in the FPGA fabric. - - -Required properties: -- compatible: Must be "xlnx,sd-fec-1.1" -- clock-names : List of input clock names from the following: - - "core_clk", Main processing clock for processing core (required) - - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required) - - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional) - - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional) - - "s_axis_ctrl_aclk", Control input AXI4-Stream Slave interface clock (optional) - - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional) - - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional) - - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional) -- clocks : Clock phandles (see clock_bindings.txt for details). -- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers - location and length. -- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes - being used. -- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is - driven with a fixed value and is not present on the device, a value of 1 - configures the DIN_WORDS to be block based, while a value of 2 configures the - DIN_WORDS input to be supplied for each AXI transaction. -- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1 - configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width - of "4x128b". -- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is - driven with a fixed value and is not present on the device, a value of 1 - configures the DOUT_WORDS to be block based, while a value of 2 configures the - DOUT_WORDS input to be supplied for each AXI transaction. -- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1 - configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width - of "4x128b". -Optional properties: -- interrupts: should contain SDFEC interrupt number - -Example ---------------------------------------- - sd_fec_0: sd-fec@a0040000 { - compatible = "xlnx,sd-fec-1.1"; - clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk"; - clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>; - reg = <0x0 0xa0040000 0x0 0x40000>; - interrupt-parent = <&axi_intc>; - interrupts = <1 0>; - xlnx,sdfec-code = "ldpc"; - xlnx,sdfec-din-words = <0>; - xlnx,sdfec-din-width = <2>; - xlnx,sdfec-dout-words = <0>; - xlnx,sdfec-dout-width = <1>; - }; diff --git a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml new file mode 100644 index 00000000000000..9bd21033742657 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/xlnx,sd-fec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx SDFEC(16nm) IP + +maintainers: + - Cvetic, Dragan <dragan.cvetic@amd.com> + - Erim, Salih <salih.erim@amd.com> + +description: + The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block + which provides high-throughput LDPC and Turbo Code implementations. + The LDPC decode & encode functionality is capable of covering a range of + customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality + principally covers codes used by LTE. The FEC Engine offers significant + power and area savings versus implementations done in the FPGA fabric. + +properties: + compatible: + const: xlnx,sd-fec-1.1 + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 8 + additionalItems: true + items: + - description: Main processing clock for processing core + - description: AXI4-Lite memory-mapped slave interface clock + - description: Control input AXI4-Stream Slave interface clock + - description: DIN AXI4-Stream Slave interface clock + - description: Status output AXI4-Stream Master interface clock + - description: DOUT AXI4-Stream Master interface clock + - description: DIN_WORDS AXI4-Stream Slave interface clock + - description: DOUT_WORDS AXI4-Stream Master interface clock + + clock-names: + allOf: + - minItems: 2 + maxItems: 8 + additionalItems: true + items: + - const: core_clk + - const: s_axi_aclk + - items: + enum: + - core_clk + - s_axi_aclk + - s_axis_ctrl_aclk + - s_axis_din_aclk + - m_axis_status_aclk + - m_axis_dout_aclk + - s_axis_din_words_aclk + - m_axis_dout_words_aclk + + interrupts: + maxItems: 1 + + xlnx,sdfec-code: + description: + The SD-FEC integrated block supports Low Density Parity Check (LDPC) + decoding and encoding and Turbo code decoding. The LDPC codes used are + highly configurable, and the specific code used can be specified on + a codeword-by-codeword basis. The Turbo code decoding is required by LTE + standard. + $ref: /schemas/types.yaml#/definitions/string + items: + enum: [ ldpc, turbo ] + + xlnx,sdfec-din-width: + description: + Configures the DIN AXI stream where a value of 1 + configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width + of "4x128b". + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 4 ] + + xlnx,sdfec-din-words: + description: + A value 0 indicates that the DIN_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DIN_WORDS to be block based, while a value of 2 configures the + DIN_WORDS input to be supplied for each AXI transaction. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + + xlnx,sdfec-dout-width: + description: + Configures the DOUT AXI stream where a value of 1 configures a width of "1x128b", + 2 a width of "2x128b" and 4 configures a width of "4x128b". + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 4 ] + + xlnx,sdfec-dout-words: + description: + A value 0 indicates that the DOUT_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DOUT_WORDS to be block based, while a value of 2 configures the + DOUT_WORDS input to be supplied for each AXI transaction. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + +required: + - compatible + - reg + - clocks + - clock-names + - xlnx,sdfec-code + - xlnx,sdfec-din-width + - xlnx,sdfec-din-words + - xlnx,sdfec-dout-width + - xlnx,sdfec-dout-words + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + sd-fec@a0040000 { + compatible = "xlnx,sd-fec-1.1"; + reg = <0xa0040000 0x40000>; + clocks = <&misc_clk_2>, <&misc_clk_0>, <&misc_clk_1>, <&misc_clk_1>, + <&misc_clk_1>, <&misc_clk_1>; + clock-names = "core_clk", "s_axi_aclk", "s_axis_ctrl_aclk", + "s_axis_din_aclk", "m_axis_status_aclk", + "m_axis_dout_aclk"; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + xlnx,sdfec-code = "ldpc"; + xlnx,sdfec-din-width = <2>; + xlnx,sdfec-din-words = <0>; + xlnx,sdfec-dout-width = <1>; + xlnx,sdfec-dout-words = <0>; + }; + diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 82eb7a24c85782..82f7ee8702cb28 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -55,8 +55,9 @@ properties: - enum: - fsl,imx8mn-usdhc - fsl,imx8mp-usdhc - - fsl,imx93-usdhc - fsl,imx8ulp-usdhc + - fsl,imx93-usdhc + - fsl,imx95-usdhc - const: fsl,imx8mm-usdhc - items: - enum: @@ -162,6 +163,9 @@ properties: - const: ahb - const: per + iommus: + maxItems: 1 + power-domains: maxItems: 1 @@ -173,6 +177,11 @@ properties: - const: state_100mhz - const: state_200mhz - const: sleep + - minItems: 2 + items: + - const: default + - const: state_100mhz + - const: sleep - minItems: 1 items: - const: default diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml index 221f5bc047bd5d..7911316fbd6ae2 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml @@ -24,6 +24,14 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: per + interrupts: maxItems: 1 @@ -34,6 +42,8 @@ properties: const: rx-tx required: + - clocks + - clock-names - compatible - reg - interrupts @@ -46,6 +56,8 @@ examples: compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10014000 0x1000>; interrupts = <11>; + clocks = <&clks 29>, <&clks 60>; + clock-names = "ipg", "per"; dmas = <&dma 7>; dma-names = "rx-tx"; bus-width = <4>; diff --git a/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt deleted file mode 100644 index a0693b7145f2ae..00000000000000 --- a/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt +++ /dev/null @@ -1,40 +0,0 @@ -* Hisilicon Hi3798CV200 specific extensions to the Synopsys Designware Mobile - Storage Host Controller - -Read synopsys-dw-mshc.txt for more details - -The Synopsys designware mobile storage host controller is used to interface -a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core Synopsys dw mshc controller properties described -by synopsys-dw-mshc.txt and the properties used by the Hisilicon Hi3798CV200 -specific extensions to the Synopsys Designware Mobile Storage Host Controller. - -Required Properties: -- compatible: Should contain "hisilicon,hi3798cv200-dw-mshc". -- clocks: A list of phandle + clock-specifier pairs for the clocks listed - in clock-names. -- clock-names: Should contain the following: - "ciu" - The ciu clock described in synopsys-dw-mshc.txt. - "biu" - The biu clock described in synopsys-dw-mshc.txt. - "ciu-sample" - Hi3798CV200 extended phase clock for ciu sampling. - "ciu-drive" - Hi3798CV200 extended phase clock for ciu driving. - -Example: - - emmc: mmc@9830000 { - compatible = "hisilicon,hi3798cv200-dw-mshc"; - reg = <0x9830000 0x10000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HISTB_MMC_CIU_CLK>, - <&crg HISTB_MMC_BIU_CLK>, - <&crg HISTB_MMC_SAMPLE_CLK>, - <&crg HISTB_MMC_DRV_CLK>; - clock-names = "ciu", "biu", "ciu-sample", "ciu-drive"; - fifo-depth = <256>; - clock-frequency = <200000000>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - non-removable; - bus-width = <8>; - }; diff --git a/Documentation/devicetree/bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml new file mode 100644 index 00000000000000..41c9b22523e7dc --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/hisilicon,hi3798cv200-dw-mshc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon HiSTB SoCs specific extensions to the Synopsys DWMMC controller + +maintainers: + - Yang Xiwen <forbidden405@outlook.com> + +properties: + compatible: + enum: + - hisilicon,hi3798cv200-dw-mshc + - hisilicon,hi3798mv200-dw-mshc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: bus interface unit clock + - description: card interface unit clock + - description: card input sample phase clock + - description: controller output drive phase clock + + clock-names: + items: + - const: ciu + - const: biu + - const: ciu-sample + - const: ciu-drive + + hisilicon,sap-dll-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + DWMMC core on Hi3798MV2x SoCs has a delay-locked-loop(DLL) attached to card data input path. + It is integrated into CRG core on the SoC and has to be controlled during tuning. + items: + - description: A phandle pointed to the CRG syscon node + - description: Sample DLL register offset in CRG address space + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +allOf: + - $ref: synopsys-dw-mshc-common.yaml# + + - if: + properties: + compatible: + contains: + const: hisilicon,hi3798mv200-dw-mshc + then: + required: + - hisilicon,sap-dll-reg + else: + properties: + hisilicon,sap-dll-reg: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/histb-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mmc@9830000 { + compatible = "hisilicon,hi3798cv200-dw-mshc"; + reg = <0x9830000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_MMC_CIU_CLK>, + <&crg HISTB_MMC_BIU_CLK>, + <&crg HISTB_MMC_SAMPLE_CLK>, + <&crg HISTB_MMC_DRV_CLK>; + clock-names = "ciu", "biu", "ciu-sample", "ciu-drive"; + resets = <&crg 0xa0 4>; + reset-names = "reset"; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins_1 &emmc_pins_2 + &emmc_pins_3 &emmc_pins_4>; + fifo-depth = <256>; + clock-frequency = <200000000>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + bus-width = <8>; + }; diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index f7a4c6bc70f6ca..29f2400247ebc6 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -67,6 +67,7 @@ properties: - renesas,sdhi-r8a779a0 # R-Car V3U - renesas,sdhi-r8a779f0 # R-Car S4-8 - renesas,sdhi-r8a779g0 # R-Car V4H + - renesas,sdhi-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-sdhi # R-Car Gen4 reg: diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml index 42804d95529342..4d3031d9965f33 100644 --- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml @@ -19,6 +19,8 @@ properties: - rockchip,rk3568-dwcmshc - rockchip,rk3588-dwcmshc - snps,dwcmshc-sdhci + - sophgo,cv1800b-dwcmshc + - sophgo,sg2002-dwcmshc - thead,th1520-dwcmshc reg: diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index 50645828ac20aa..4598930851d94d 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -56,6 +56,7 @@ Required properties: "atmel,sama5d4-pmecc" "atmel,sama5d2-pmecc" "microchip,sam9x60-pmecc" + "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc" - reg: should contain 2 register ranges. The first one is pointing to the PMECC block, and the second one to the PMECC_ERRLOC block. diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml index f57e96374e6718..064e840aeaa115 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml @@ -9,6 +9,7 @@ title: Broadcom STB NAND Controller maintainers: - Brian Norris <computersforpeace@gmail.com> - Kamal Dasu <kdasu.kdev@gmail.com> + - William Zhang <william.zhang@broadcom.com> description: | The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND @@ -18,9 +19,10 @@ description: | supports basic PROGRAM and READ functions, among other features. This controller was originally designed for STB SoCs (BCM7xxx) but is now - available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and - iProc/Cygnus. Its history includes several similar (but not fully register - compatible) versions. + available on a variety of Broadcom SoCs, including some BCM3xxx, MIPS based + Broadband SoC (BCM63xx), ARM based Broadband SoC (BCMBCA) and iProc/Cygnus. + Its history includes several similar (but not fully register compatible) + versions. -- Additional SoC-specific NAND controller properties -- @@ -53,7 +55,7 @@ properties: - brcm,brcmnand-v7.2 - brcm,brcmnand-v7.3 - const: brcm,brcmnand - - description: BCM63138 SoC-specific NAND controller + - description: BCMBCA SoC-specific NAND controller items: - const: brcm,nand-bcm63138 - enum: @@ -111,6 +113,13 @@ properties: earlier versions of this core that include WP type: boolean + brcm,wp-not-connected: + description: + Use this property when WP pin is not physically wired to the NAND chip. + Write protection feature cannot be used. By default, controller assumes + the pin is connected and feature is used. + $ref: /schemas/types.yaml#/definitions/flag + patternProperties: "^nand@[a-f0-9]$": type: object @@ -137,6 +146,15 @@ patternProperties: layout. $ref: /schemas/types.yaml#/definitions/uint32 + brcm,nand-ecc-use-strap: + description: + This property requires the host system to get the ECC related + settings from the SoC NAND boot strap configuration instead of + the generic NAND ECC settings. This is a common hardware design + on BCMBCA based boards. This strap ECC option and generic NAND + ECC option can not be specified at the same time. + $ref: /schemas/types.yaml#/definitions/flag + unevaluatedProperties: false allOf: @@ -177,6 +195,8 @@ allOf: - const: iproc-idm - const: iproc-ext - if: + required: + - interrupts properties: interrupts: minItems: 2 @@ -184,12 +204,26 @@ allOf: required: - interrupt-names + - if: + patternProperties: + "^nand@[a-f0-9]$": + required: + - brcm,nand-ecc-use-strap + then: + patternProperties: + "^nand@[a-f0-9]$": + properties: + nand-ecc-strength: false + nand-ecc-step-size: false + nand-ecc-maximize: false + nand-ecc-algo: false + brcm,nand-oob-sector-size: false + unevaluatedProperties: false required: - reg - reg-names - - interrupts examples: - | diff --git a/Documentation/devicetree/bindings/mtd/davinci-nand.txt b/Documentation/devicetree/bindings/mtd/davinci-nand.txt index edebeae1f5b31e..eb8e2ff4dbd290 100644 --- a/Documentation/devicetree/bindings/mtd/davinci-nand.txt +++ b/Documentation/devicetree/bindings/mtd/davinci-nand.txt @@ -68,7 +68,7 @@ Deprecated properties: false. Nand device bindings may contain additional sub-nodes describing partitions of -the address space. See partition.txt for more detail. The NAND Flash timing +the address space. See mtd.yaml for more detail. The NAND Flash timing values must be programmed in the chip select’s node of AEMIF memory-controller (see Documentation/devicetree/bindings/memory-controllers/ davinci-aemif.txt). diff --git a/Documentation/devicetree/bindings/mtd/flctl-nand.txt b/Documentation/devicetree/bindings/mtd/flctl-nand.txt index 427f46dc60add1..51518399d73779 100644 --- a/Documentation/devicetree/bindings/mtd/flctl-nand.txt +++ b/Documentation/devicetree/bindings/mtd/flctl-nand.txt @@ -15,7 +15,7 @@ The DMA fields are not used yet in the driver but are listed here for completing the bindings. The device tree may optionally contain sub-nodes describing partitions of the -address space. See partition.txt for more detail. +address space. See mtd.yaml for more detail. Example: diff --git a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt index 25f07c1f9e44d9..530c017e014e29 100644 --- a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt +++ b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt @@ -22,7 +22,7 @@ Deprecated properties: (R/B# pins not connected). Each flash chip described may optionally contain additional sub-nodes -describing partitions of the address space. See partition.txt for more +describing partitions of the address space. See mtd.yaml for more detail. Examples: diff --git a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt index 486a17d533d7a3..0edf55d47ea8ec 100644 --- a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt @@ -26,7 +26,7 @@ Optional properties: read to ensure that the GPIO accesses have completed. The device tree may optionally contain sub-nodes describing partitions of the -address space. See partition.txt for more detail. +address space. See mtd.yaml for more detail. Examples: diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml index ba086c34626d10..021c0da0b072ff 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml @@ -12,7 +12,7 @@ maintainers: description: | The GPMI nand controller provides an interface to control the NAND flash chips. The device tree may optionally contain sub-nodes - describing partitions of the address space. See partition.txt for + describing partitions of the address space. See mtd.yaml for more detail. properties: diff --git a/Documentation/devicetree/bindings/mtd/hisi504-nand.txt b/Documentation/devicetree/bindings/mtd/hisi504-nand.txt index 8963983ae7cbac..362203e7d50e75 100644 --- a/Documentation/devicetree/bindings/mtd/hisi504-nand.txt +++ b/Documentation/devicetree/bindings/mtd/hisi504-nand.txt @@ -22,7 +22,7 @@ The following ECC strength and step size are currently supported: - nand-ecc-strength = <16>, nand-ecc-step-size = <1024> Flash chip may optionally contain additional sub-nodes describing partitions of -the address space. See partition.txt for more detail. +the address space. See mtd.yaml for more detail. Example: diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml index 58f0cea160ef54..6e3afb42926ea6 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml @@ -52,6 +52,9 @@ properties: minItems: 1 maxItems: 2 + interrupts: + maxItems: 1 + m25p,fast-read: type: boolean description: diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index f322290ee5165f..ee442ecb11cd9c 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -10,6 +10,8 @@ maintainers: - Miquel Raynal <miquel.raynal@bootlin.com> - Richard Weinberger <richard@nod.at> +select: false + properties: $nodename: pattern: "^(flash|.*sram|nand)(@.*)?$" diff --git a/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt b/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt index e737e5beb7bf48..4a00ec2b2540c5 100644 --- a/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt +++ b/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt @@ -39,7 +39,7 @@ Optional children node properties: - wp-gpios: GPIO specifier for the write protect pin. Optional child node of NAND chip nodes: -Partitions: see partition.txt +Partitions: see mtd.yaml Example: nand-controller@70008000 { diff --git a/Documentation/devicetree/bindings/mtd/orion-nand.txt b/Documentation/devicetree/bindings/mtd/orion-nand.txt index 2d6ab660e6032a..b9997b1f13ac70 100644 --- a/Documentation/devicetree/bindings/mtd/orion-nand.txt +++ b/Documentation/devicetree/bindings/mtd/orion-nand.txt @@ -13,7 +13,7 @@ Optional properties: registers in usecs The device tree may optionally contain sub-nodes describing partitions of the -address space. See partition.txt for more detail. +address space. See mtd.yaml for more detail. Example: diff --git a/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt b/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt index 09815c40fc8aee..6354553506602d 100644 --- a/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt +++ b/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt @@ -19,7 +19,7 @@ Optional child properties: Each child device node may optionally contain a 'partitions' sub-node, which further contains sub-nodes describing the flash partition mapping. -See partition.txt for more detail. +See mtd.yaml for more detail. Example: diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml index e72cb5bacaf0a9..b8ef9ba88e92a5 100644 --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml @@ -14,10 +14,11 @@ properties: enum: - st,stm32mp15-fmc2 - st,stm32mp1-fmc2-nfc + - st,stm32mp25-fmc2-nfc reg: minItems: 6 - maxItems: 7 + maxItems: 12 interrupts: maxItems: 1 @@ -92,6 +93,28 @@ allOf: - description: Chip select 1 command - description: Chip select 1 address space + - if: + properties: + compatible: + contains: + const: st,stm32mp25-fmc2-nfc + then: + properties: + reg: + items: + - description: Chip select 0 data + - description: Chip select 0 command + - description: Chip select 0 address space + - description: Chip select 1 data + - description: Chip select 1 command + - description: Chip select 1 address space + - description: Chip select 2 data + - description: Chip select 2 command + - description: Chip select 2 address space + - description: Chip select 3 data + - description: Chip select 3 command + - description: Chip select 3 address space + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml index 8b943082a2416e..571ad9e13ecfb6 100644 --- a/Documentation/devicetree/bindings/mux/mux-controller.yaml +++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml @@ -74,7 +74,7 @@ select: properties: $nodename: - pattern: '^mux-controller(@.*|-[0-9a-f]+)?$' + pattern: '^mux-controller(@.*|-([0-9]|[1-9][0-9]+))?$' '#mux-control-cells': enum: [ 0, 1 ] diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index eba2f3026ab0ac..528ef3572b621e 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Bluetooth Chips maintainers: - - Balakrishna Godavarthi <bgodavar@codeaurora.org> - - Rocky Liao <rjliao@codeaurora.org> + - Balakrishna Godavarthi <quic_bgodavar@quicinc.com> + - Rocky Liao <quic_rjliao@quicinc.com> description: This binding describes Qualcomm UART-attached bluetooth chips. diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml index 4162469c3c08a5..f197d9b516bb2a 100644 --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -39,6 +39,9 @@ properties: - fsl,imx6sx-flexcan - const: fsl,imx6q-flexcan - items: + - const: fsl,imx95-flexcan + - const: fsl,imx93-flexcan + - items: - enum: - fsl,ls1028ar1-flexcan - const: fsl,lx2160ar1-flexcan diff --git a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml index 45aa3de7cf014a..01e4d4a54df6a0 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml @@ -24,7 +24,9 @@ properties: maxItems: 1 clocks: - maxItems: 1 + items: + - description: AHB peripheral clock + - description: CAN bus clock required: - compatible @@ -39,7 +41,7 @@ examples: can@2010c000 { compatible = "microchip,mpfs-can"; reg = <0x2010c000 0x1000>; - clocks = <&clkcfg 17>; + clocks = <&clkcfg 17>, <&clkcfg 37>; interrupt-parent = <&plic>; interrupts = <56>; }; diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml index ac2381e6602790..8b3826243dddfc 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml @@ -36,20 +36,18 @@ properties: allOf: - if: + properties: + compatible: + contains: + const: mac-base required: [ compatible ] then: - if: - properties: - compatible: - contains: - const: mac-base - then: - properties: - "#nvmem-cell-cells": - description: The first argument is a MAC address offset. - const: 1 - required: - - "#nvmem-cell-cells" + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 + required: + - "#nvmem-cell-cells" required: - reg diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-provider.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-provider.yaml new file mode 100644 index 00000000000000..4009a9a03841ed --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem-provider.yaml @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/nvmem-provider.yaml# +$schema: http://devicetree.org/meta-schemas/base.yaml# + +title: NVMEM (Non Volatile Memory) Provider + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +select: true + +properties: + '#nvmem-cell-cells': + enum: [0, 1] + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt deleted file mode 100644 index 4881561b3a02ac..00000000000000 --- a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt +++ /dev/null @@ -1,46 +0,0 @@ --------------------------------------------------------------------------- -= Zynq UltraScale+ MPSoC nvmem firmware driver binding = --------------------------------------------------------------------------- -The nvmem_firmware node provides access to the hardware related data -like soc revision, IDCODE... etc, By using the firmware interface. - -Required properties: -- compatible: should be "xlnx,zynqmp-nvmem-fw" - -= Data cells = -Are child nodes of silicon id, bindings of which as described in -bindings/nvmem/nvmem.txt - -------- - Example -------- -firmware { - zynqmp_firmware: zynqmp-firmware { - compatible = "xlnx,zynqmp-firmware"; - method = "smc"; - - nvmem_firmware { - compatible = "xlnx,zynqmp-nvmem-fw"; - #address-cells = <1>; - #size-cells = <1>; - - /* Data cells */ - soc_revision: soc_revision { - reg = <0x0 0x4>; - }; - }; - }; -}; - -= Data consumers = -Are device nodes which consume nvmem data cells. - -For example: - pcap { - ... - - nvmem-cells = <&soc_revision>; - nvmem-cell-names = "soc_revision"; - - ... - }; diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml new file mode 100644 index 00000000000000..917c40d5c382f4 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/xlnx,zynqmp-nvmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zynq UltraScale+ MPSoC Non Volatile Memory interface + +description: | + The ZynqMP MPSoC provides access to the hardware related data + like SOC revision, IDCODE and specific purpose efuses. + +maintainers: + - Kalyani Akula <kalyani.akula@amd.com> + - Praveen Teja Kundanala <praveen.teja.kundanala@amd.com> + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + const: xlnx,zynqmp-nvmem-fw + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + nvmem { + compatible = "xlnx,zynqmp-nvmem-fw"; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + soc_revision: soc-revision@0 { + reg = <0x0 0x4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml index e2f8f7af3cf41c..b1bb87c865ed34 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml @@ -57,8 +57,6 @@ patternProperties: specific binding. minItems: 1 maxItems: 32 - items: - maxItems: 1 opp-microvolt: description: | diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml index d91b639ae7ae75..a8b34f58f8f495 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml @@ -150,22 +150,6 @@ allOf: - {} - const: pcie_phy - const: pcie_aux - - if: - properties: - compatible: - not: - contains: - enum: - - fsl,imx6sx-pcie - - fsl,imx8mq-pcie - - fsl,imx6sx-pcie-ep - - fsl,imx8mq-pcie-ep - then: - properties: - clocks: - maxItems: 3 - clock-names: - maxItems: 3 - if: properties: @@ -223,6 +207,7 @@ allOf: - fsl,imx6sx-pcie - fsl,imx6q-pcie - fsl,imx6qp-pcie + - fsl,imx95-pcie - fsl,imx6sx-pcie-ep - fsl,imx6q-pcie-ep - fsl,imx6qp-pcie-ep diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml index ee155ed5f18118..a06f75df8458ae 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml @@ -22,14 +22,7 @@ properties: - fsl,imx8mm-pcie-ep - fsl,imx8mq-pcie-ep - fsl,imx8mp-pcie-ep - - reg: - minItems: 2 - - reg-names: - items: - - const: dbi - - const: addr_space + - fsl,imx95-pcie-ep clocks: minItems: 3 @@ -66,7 +59,44 @@ allOf: properties: compatible: enum: + - fsl,imx8mm-pcie-ep + - fsl,imx8mq-pcie-ep + - fsl,imx8mp-pcie-ep + then: + properties: + reg: + minItems: 2 + maxItems: 2 + reg-names: + items: + - const: dbi + - const: addr_space + + - if: + properties: + compatible: + enum: + - fsl,imx95-pcie-ep + then: + properties: + reg: + minItems: 6 + maxItems: 6 + reg-names: + items: + - const: dbi + - const: atu + - const: dbi2 + - const: app + - const: dma + - const: addr_space + + - if: + properties: + compatible: + enum: - fsl,imx8mq-pcie-ep + - fsl,imx95-pcie-ep then: properties: clocks: diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index 81bbb8728f0f97..8b8d77b1154b5c 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -29,16 +29,7 @@ properties: - fsl,imx8mq-pcie - fsl,imx8mm-pcie - fsl,imx8mp-pcie - - reg: - items: - - description: Data Bus Interface (DBI) registers. - - description: PCIe configuration space region. - - reg-names: - items: - - const: dbi - - const: config + - fsl,imx95-pcie clocks: minItems: 3 @@ -94,6 +85,43 @@ allOf: properties: compatible: enum: + - fsl,imx6q-pcie + - fsl,imx6sx-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + - fsl,imx8mq-pcie + - fsl,imx8mm-pcie + - fsl,imx8mp-pcie + then: + properties: + reg: + maxItems: 2 + reg-names: + items: + - const: dbi + - const: config + + - if: + properties: + compatible: + enum: + - fsl,imx95-pcie + then: + properties: + reg: + minItems: 4 + maxItems: 4 + reg-names: + items: + - const: dbi + - const: config + - const: atu + - const: app + + - if: + properties: + compatible: + enum: - fsl,imx6sx-pcie then: properties: @@ -111,6 +139,7 @@ allOf: compatible: enum: - fsl,imx8mq-pcie + - fsl,imx95-pcie then: properties: clocks: diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml new file mode 100644 index 00000000000000..0d1b23523f62e7 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCI Express Root Complex Common Properties + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + reg: + minItems: 4 + maxItems: 6 + + reg-names: + minItems: 4 + maxItems: 6 + + interrupts: + minItems: 1 + maxItems: 8 + + interrupt-names: + minItems: 1 + maxItems: 8 + + iommu-map: + minItems: 1 + maxItems: 16 + + clocks: + minItems: 3 + maxItems: 13 + + clock-names: + minItems: 3 + maxItems: 13 + + dma-coherent: true + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: pcie-mem + - const: cpu-pcie + + phys: + maxItems: 1 + + phy-names: + items: + - const: pciephy + + power-domains: + maxItems: 1 + + required-opps: + maxItems: 1 + + resets: + minItems: 1 + maxItems: 12 + + reset-names: + minItems: 1 + maxItems: 12 + + perst-gpios: + description: GPIO controlled connection to PERST# signal + maxItems: 1 + + wake-gpios: + description: GPIO controlled connection to WAKE# signal + maxItems: 1 + +required: + - reg + - reg-names + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + +anyOf: + - required: + - interrupts + - interrupt-names + - "#interrupt-cells" + - required: + - msi-map + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml new file mode 100644 index 00000000000000..efde49d1bef858 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SA8775p PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sa8775p + + reg: + minItems: 6 + maxItems: 6 + + reg-names: + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 5 + maxItems: 5 + + clock-names: + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +required: + - interconnects + - interconnect-names + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sa8775p-gcc.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sa8775p"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf20>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x4000>, + <0x0 0x40100000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; + assigned-clock-rates = <19200000>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + dma-coherent; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &pcie_smmu 0x0000 0x1>, + <0x100 &pcie_smmu 0x0001 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml new file mode 100644 index 00000000000000..634da24ec3ed09 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7280 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SC7280 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sc7280 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 13 + maxItems: 13 + + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: msi + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + + vddpe-3v3-supply: + description: PCIe endpoint power supply + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c08000 { + compatible = "qcom,pcie-sc7280"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <1>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_phy>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + dma-coherent; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; + + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_clkreq_n>; + + power-domains = <&gcc GCC_PCIE_1_GDSC>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&pp3300_ssd>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml new file mode 100644 index 00000000000000..baf1813ec0ac2f --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8180x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC8180x PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SC8180x SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sc8180x + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 8 + + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc8180x.h> + #include <dt-bindings/interconnect/qcom,sc8180x.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; + assigned-clock-rates = <19200000>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml new file mode 100644 index 00000000000000..25c9f13ae97723 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8280xp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC8280XP PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SC8280XP SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + enum: + - qcom,pcie-sa8540p + - qcom,pcie-sc8280xp + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 9 + + clock-names: + minItems: 8 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: noc_aggr_4 # NoC aggregate 4 clock + - const: noc_aggr_south_sf # NoC aggregate South SF clock + - const: cnoc_qx # Configuration NoC QX clock + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + + vddpe-3v3-supply: + description: A phandle to the PCIe endpoint power supply + +required: + - interconnects + - interconnect-names + +allOf: + - $ref: qcom,pcie-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc8280xp + then: + properties: + interrupts: + minItems: 4 + maxItems: 4 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + else: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sc8280xp.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c20000 { + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c20000 0x0 0x3000>, + <0x0 0x3c000000 0x0 0xf1d>, + <0x0 0x3c000f20 0x0 0xa8>, + <0x0 0x3c001000 0x0 0x1000>, + <0x0 0x3c100000 0x0 0x100000>, + <0x0 0x01c23000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>, + <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <2>; + num-lanes = <4>; + + #address-cells = <3>; + #size-cells = <2>; + + assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>; + assigned-clock-rates = <19200000>; + clocks = <&gcc GCC_PCIE_2A_AUX_CLK>, + <&gcc GCC_PCIE_2A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + dma-coherent; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie2a_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie2a_default>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_2A_GDSC>; + + resets = <&gcc GCC_PCIE_2A_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&vreg_nvme>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml new file mode 100644 index 00000000000000..9d569644fda906 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8150.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8150 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8150 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sm8150 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 8 + + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ref # REFERENCE clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8150.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8150.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + pcie@1c00000 { + compatible = "qcom,pcie-sm8150"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ref"; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml new file mode 100644 index 00000000000000..4d060bce6f9d77 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8250 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8250 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sm8250 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 9 + + clock-names: + # Unfortunately the "optional" ref clock is used in the middle of the list + oneOf: + - items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8250"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>, + <0 0x01c03000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml new file mode 100644 index 00000000000000..9eb6e457b07f1d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8350.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8350 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sm8350 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 9 + + clock-names: + minItems: 8 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + - const: aggre0 # Aggre NoC PCIe0 AXI clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +oneOf: + - properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + + - properties: + interrupts: + minItems: 8 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8350.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8350.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8350"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre1", + "aggre0"; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml new file mode 100644 index 00000000000000..1496d6993ab489 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8450 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + enum: + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 11 + maxItems: 12 + + clock-names: + minItems: 11 + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - enum: [aggre0, aggre1] # Aggre NoC PCIe0/1 AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8450.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8450-pcie0"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + max-link-speed = <2>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, + <&pcie0_phy>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + msi-map = <0x0 &gic_its 0x5981 0x1>, + <0x100 &gic_its 0x5980 0x1>; + msi-map-mask = <0xff00>; + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml new file mode 100644 index 00000000000000..24cb38673581d7 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8550.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8550 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on + the Synopsys DesignWare PCIe IP. + +properties: + compatible: + oneOf: + - const: qcom,pcie-sm8550 + - items: + - enum: + - qcom,pcie-sm8650 + - const: qcom,pcie-sm8550 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 7 + maxItems: 8 + + clock-names: + minItems: 7 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: noc_aggr # Aggre NoC PCIe AXI clock + - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + items: + - const: pci # PCIe core reset + - const: link_down # PCIe link down reset + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8550-gcc.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8550"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml new file mode 100644 index 00000000000000..1074310a8e7a2c --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml @@ -0,0 +1,165 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm X1E80100 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on + the Synopsys DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-x1e80100 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 7 + maxItems: 7 + + clock-names: + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: noc_aggr # Aggre NoC PCIe AXI clock + - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + items: + - const: pci # PCIe core reset + - const: link_down # PCIe link down reset + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,x1e80100-gcc.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c08000 { + compatible = "qcom,pcie-x1e80100"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x7c000000 0 0xf1d>, + <0 0x7c000f40 0 0xa8>, + <0 0x7c001000 0 0x1000>, + <0 0x7c100000 0 0x100000>, + <0 0x01c0b000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr", + "cnoc_sf_axi"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interconnects = <&pcie_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + phys = <&pcie4_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc GCC_PCIE_4_GDSC>; + + resets = <&gcc GCC_PCIE_4_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index a93ab3b5406664..cf9a6910b542f0 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -28,23 +28,8 @@ properties: - qcom,pcie-ipq8074-gen3 - qcom,pcie-msm8996 - qcom,pcie-qcs404 - - qcom,pcie-sa8540p - - qcom,pcie-sa8775p - - qcom,pcie-sc7280 - - qcom,pcie-sc8180x - - qcom,pcie-sc8280xp - qcom,pcie-sdm845 - qcom,pcie-sdx55 - - qcom,pcie-sm8150 - - qcom,pcie-sm8250 - - qcom,pcie-sm8350 - - qcom,pcie-sm8450-pcie0 - - qcom,pcie-sm8450-pcie1 - - qcom,pcie-sm8550 - - items: - - enum: - - qcom,pcie-sm8650 - - const: qcom,pcie-sm8550 - items: - const: qcom,pcie-msm8998 - const: qcom,pcie-msm8996 @@ -106,9 +91,6 @@ properties: vdda_refclk-supply: description: A phandle to the core analog power supply for IC which generates reference clock - vddpe-3v3-supply: - description: A phandle to the PCIe endpoint power supply - phys: maxItems: 1 @@ -123,6 +105,9 @@ properties: description: GPIO controlled connection to PERST# signal maxItems: 1 + required-opps: + maxItems: 1 + wake-gpios: description: GPIO controlled connection to WAKE# signal maxItems: 1 @@ -143,7 +128,6 @@ anyOf: - "#interrupt-cells" - required: - msi-map - - msi-map-mask allOf: - $ref: /schemas/pci/pci-bus.yaml# @@ -217,16 +201,7 @@ allOf: compatible: contains: enum: - - qcom,pcie-sa8775p - - qcom,pcie-sc7280 - - qcom,pcie-sc8180x - - qcom,pcie-sc8280xp - qcom,pcie-sdx55 - - qcom,pcie-sm8250 - - qcom,pcie-sm8350 - - qcom,pcie-sm8450-pcie0 - - qcom,pcie-sm8450-pcie1 - - qcom,pcie-sm8550 then: properties: reg: @@ -456,65 +431,6 @@ allOf: compatible: contains: enum: - - qcom,pcie-sc7280 - then: - properties: - clocks: - minItems: 13 - maxItems: 13 - clock-names: - items: - - const: pipe # PIPE clock - - const: pipe_mux # PIPE MUX - - const: phy_pipe # PIPE output clock - - const: ref # REFERENCE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock - - const: aggre1 # Aggre NoC PCIe1 AXI clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sc8180x - then: - properties: - clocks: - minItems: 8 - maxItems: 8 - clock-names: - items: - - const: pipe # PIPE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ref # REFERENCE clock - - const: tbu # PCIe TBU clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - qcom,pcie-sdm845 then: oneOf: @@ -558,229 +474,6 @@ allOf: compatible: contains: enum: - - qcom,pcie-sm8150 - then: - properties: - clocks: - minItems: 8 - maxItems: 8 - clock-names: - items: - - const: pipe # PIPE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ref # REFERENCE clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8250 - then: - oneOf: - # Unfortunately the "optional" ref clock is used in the middle of the list - - properties: - clocks: - minItems: 9 - maxItems: 9 - clock-names: - items: - - const: pipe # PIPE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ref # REFERENCE clock - - const: tbu # PCIe TBU clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - properties: - clocks: - minItems: 8 - maxItems: 8 - clock-names: - items: - - const: pipe # PIPE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - properties: - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8350 - then: - properties: - clocks: - minItems: 8 - maxItems: 9 - clock-names: - minItems: 8 - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: aggre1 # Aggre NoC PCIe1 AXI clock - - const: aggre0 # Aggre NoC PCIe0 AXI clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8450-pcie0 - then: - properties: - clocks: - minItems: 12 - maxItems: 12 - clock-names: - items: - - const: pipe # PIPE clock - - const: pipe_mux # PIPE MUX - - const: phy_pipe # PIPE output clock - - const: ref # REFERENCE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: aggre0 # Aggre NoC PCIe0 AXI clock - - const: aggre1 # Aggre NoC PCIe1 AXI clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8450-pcie1 - then: - properties: - clocks: - minItems: 11 - maxItems: 11 - clock-names: - items: - - const: pipe # PIPE clock - - const: pipe_mux # PIPE MUX - - const: phy_pipe # PIPE output clock - - const: ref # REFERENCE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: aggre1 # Aggre NoC PCIe1 AXI clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8550 - then: - properties: - clocks: - minItems: 7 - maxItems: 8 - clock-names: - minItems: 7 - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: noc_aggr # Aggre NoC PCIe AXI clock - - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock - resets: - minItems: 1 - maxItems: 2 - reset-names: - minItems: 1 - items: - - const: pci # PCIe core reset - - const: link_down # PCIe link down reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sa8540p - - qcom,pcie-sc8280xp - then: - properties: - clocks: - minItems: 8 - maxItems: 9 - clock-names: - minItems: 8 - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: noc_aggr_4 # NoC aggregate 4 clock - - const: noc_aggr_south_sf # NoC aggregate South SF clock - - const: cnoc_qx # Configuration NoC QX clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - qcom,pcie-sdx55 then: properties: @@ -803,43 +496,6 @@ allOf: - const: pci # PCIe core reset - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sa8775p - then: - properties: - clocks: - minItems: 5 - maxItems: 5 - clock-names: - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sa8540p - - qcom,pcie-sa8775p - - qcom,pcie-sc8280xp - then: - required: - - interconnects - - interconnect-names - - - if: not: properties: compatible: @@ -874,16 +530,7 @@ allOf: contains: enum: - qcom,pcie-msm8996 - - qcom,pcie-sa8775p - - qcom,pcie-sc7280 - - qcom,pcie-sc8180x - qcom,pcie-sdm845 - - qcom,pcie-sm8150 - - qcom,pcie-sm8250 - - qcom,pcie-sm8350 - - qcom,pcie-sm8450-pcie0 - - qcom,pcie-sm8450-pcie1 - - qcom,pcie-sm8550 then: oneOf: - properties: @@ -911,24 +558,6 @@ allOf: compatible: contains: enum: - - qcom,pcie-sc8280xp - then: - properties: - interrupts: - minItems: 4 - maxItems: 4 - interrupt-names: - items: - - const: msi0 - - const: msi1 - - const: msi2 - - const: msi3 - - - if: - properties: - compatible: - contains: - enum: - qcom,pcie-apq8064 - qcom,pcie-apq8084 - qcom,pcie-ipq4019 @@ -938,7 +567,6 @@ allOf: - qcom,pcie-ipq8074 - qcom,pcie-ipq8074-gen3 - qcom,pcie-qcs404 - - qcom,pcie-sa8540p then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/perf/arm,coresight-pmu.yaml b/Documentation/devicetree/bindings/perf/arm,coresight-pmu.yaml new file mode 100644 index 00000000000000..985b62990f8027 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/arm,coresight-pmu.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/arm,coresight-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Coresight Performance Monitoring Unit Architecture + +maintainers: + - Robin Murphy <robin.murphy@arm.com> + +properties: + compatible: + const: arm,coresight-pmu + + reg: + items: + - description: Register page 0 + - description: Register page 1, if the PMU implements the dual-page extension + minItems: 1 + + interrupts: + items: + - description: Overflow interrupt + + cpus: + description: If the PMU is associated with a particular CPU or subset of CPUs, + array of phandles to the appropriate CPU node(s) + + reg-io-width: + description: Granularity at which PMU register accesses are single-copy atomic + default: 4 + enum: [4, 8] + +required: + - compatible + - reg + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml b/Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml new file mode 100644 index 00000000000000..915c6b81402625 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/starfive,jh8100-starlink-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH8100 StarLink PMU + +maintainers: + - Ji Sheng Teoh <jisheng.teoh@starfivetech.com> + +description: + StarFive's JH8100 StarLink PMU integrates one or more CPU cores with a + shared L3 memory system. The PMU support overflow interrupt, up to + 16 programmable 64bit event counters, and an independent 64bit cycle + counter. StarFive's JH8100 StarLink PMU is accessed via MMIO. + +properties: + compatible: + const: starfive,jh8100-starlink-pmu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + pmu@12900000 { + compatible = "starfive,jh8100-starlink-pmu"; + reg = <0x0 0x12900000 0x0 0x10000>; + interrupts = <34>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml new file mode 100644 index 00000000000000..2127a5732f7346 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 MediaTek, BayLibre +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Sensor Interface MIPI CSI CD-PHY + +maintainers: + - Julien Stephan <jstephan@baylibre.com> + - Andy Hsieh <andy.hsieh@mediatek.com> + +description: + The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2 + receivers. The number of PHYs depends on the SoC model. + Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only + capable. + +properties: + compatible: + enum: + - mediatek,mt8365-csi-rx + + reg: + maxItems: 1 + + num-lanes: + enum: [2, 3, 4] + + '#phy-cells': + enum: [0, 1] + description: | + If the PHY doesn't support mode selection then #phy-cells must be 0 and + PHY mode is described using phy-type property. + If the PHY supports mode selection, then #phy-cells must be 1 and mode + is set in the PHY cells. Supported modes are: + - PHY_TYPE_DPHY + - PHY_TYPE_CPHY + See include/dt-bindings/phy/phy.h for constants. + + phy-type: + description: + If the PHY doesn't support mode selection then this set the operating mode. + See include/dt-bindings/phy/phy.h for constants. + const: 10 + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - num-lanes + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + csi0_rx: phy@11c10000 { + compatible = "mediatek,mt8365-csi-rx"; + reg = <0 0x11c10000 0 0x2000>; + num-lanes = <2>; + #phy-cells = <1>; + }; + + csi1_rx: phy@11c12000 { + compatible = "mediatek,mt8365-csi-rx"; + reg = <0 0x11c12000 0 0x2000>; + phy-type = <PHY_TYPE_DPHY>; + num-lanes = <2>; + #phy-cells = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index dfb31314face76..15dc8efe6ffe74 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -20,6 +20,7 @@ properties: compatible: enum: - cdns,torrent-phy + - ti,j7200-serdes-10g - ti,j721e-serdes-10g '#address-cells': @@ -35,14 +36,18 @@ properties: minItems: 1 maxItems: 2 description: - PHY reference clock for 1 item. Must contain an entry in clock-names. - Optional Parent to enable output reference clock. + PHY input reference clocks - refclk (for PLL0) & pll1_refclk (for PLL1). + pll1_refclk is optional and used for multi-protocol configurations requiring + separate reference clock for each protocol. + Same refclk is used for both PLL0 and PLL1 if no separate pll1_refclk is used. + Optional parent clock (phy_en_refclk) to enable a reference clock output feature + on some platforms to output either derived or received reference clock. clock-names: minItems: 1 items: - const: refclk - - const: phy_en_refclk + - enum: [ pll1_refclk, phy_en_refclk ] reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml new file mode 100644 index 00000000000000..f1f4e4f83352d7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,msm8998-qmp-usb3-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QMP PHY controller (USB, MSM8998) + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + The QMP PHY controller supports physical layer functionality for USB-C on + several Qualcomm chipsets. + +properties: + compatible: + enum: + - qcom,msm8998-qmp-usb3-phy + - qcom,qcm2290-qmp-usb3-phy + - qcom,sdm660-qmp-usb3-phy + - qcom,sm6115-qmp-usb3-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + + clock-names: + maxItems: 4 + + resets: + maxItems: 2 + + reset-names: + items: + - const: phy + - const: phy_phy + + vdda-phy-supply: true + + vdda-pll-supply: true + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + + "#phy-cells": + const: 0 + + orientation-switch: + description: + Flag the PHY as possible handler of USB Type-C orientation switching + type: boolean + + qcom,tcsr-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to TCSR hardware block + - description: offset of the VLS CLAMP register + description: Clamp register present in the TCSR + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of the PHY + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Incoming endpoint from the USB controller + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + - "#clock-cells" + - clock-output-names + - "#phy-cells" + - qcom,tcsr-reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-qmp-usb3-phy + - qcom,sdm660-qmp-usb3-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: aux + - const: ref + - const: cfg_ahb + - const: pipe + + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-qmp-usb3-phy + - qcom,sm6115-qmp-usb3-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: cfg_ahb + - const: ref + - const: com_aux + - const: pipe + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + phy@c010000 { + compatible = "qcom,msm8998-qmp-usb3-phy"; + reg = <0x0c010000 0x1000>; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + + orientation-switch; + + qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&pmic_typec_mux_in>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index 6c03f2d5fca3cc..ba966a78a1283f 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -38,6 +38,8 @@ properties: - qcom,sm8550-qmp-gen4x2-pcie-phy - qcom,sm8650-qmp-gen3x2-pcie-phy - qcom,sm8650-qmp-gen4x2-pcie-phy + - qcom,x1e80100-qmp-gen3x2-pcie-phy + - qcom,x1e80100-qmp-gen4x2-pcie-phy reg: minItems: 1 @@ -151,6 +153,8 @@ allOf: - qcom,sm8550-qmp-gen4x2-pcie-phy - qcom,sm8650-qmp-gen3x2-pcie-phy - qcom,sm8650-qmp-gen4x2-pcie-phy + - qcom,x1e80100-qmp-gen3x2-pcie-phy + - qcom,x1e80100-qmp-gen4x2-pcie-phy then: properties: clocks: @@ -194,6 +198,8 @@ allOf: enum: - qcom,sm8550-qmp-gen4x2-pcie-phy - qcom,sm8650-qmp-gen4x2-pcie-phy + - qcom,x1e80100-qmp-gen3x2-pcie-phy + - qcom,x1e80100-qmp-gen4x2-pcie-phy then: properties: resets: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml index 8474eef8d0ff52..91a6cc38ff7ff5 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml @@ -19,6 +19,7 @@ properties: - qcom,msm8996-qmp-ufs-phy - qcom,msm8998-qmp-ufs-phy - qcom,sa8775p-qmp-ufs-phy + - qcom,sc7180-qmp-ufs-phy - qcom,sc7280-qmp-ufs-phy - qcom,sc8180x-qmp-ufs-phy - qcom,sc8280xp-qmp-ufs-phy @@ -38,15 +39,12 @@ properties: maxItems: 1 clocks: - minItems: 1 + minItems: 2 maxItems: 3 clock-names: - minItems: 1 - items: - - const: ref - - const: ref_aux - - const: qref + minItems: 2 + maxItems: 3 power-domains: maxItems: 1 @@ -86,22 +84,9 @@ allOf: compatible: contains: enum: + - qcom,msm8998-qmp-ufs-phy - qcom,sa8775p-qmp-ufs-phy - qcom,sc7280-qmp-ufs-phy - - qcom,sm8450-qmp-ufs-phy - then: - properties: - clocks: - minItems: 3 - clock-names: - minItems: 3 - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8998-qmp-ufs-phy - qcom,sc8180x-qmp-ufs-phy - qcom,sc8280xp-qmp-ufs-phy - qcom,sdm845-qmp-ufs-phy @@ -112,14 +97,19 @@ allOf: - qcom,sm8150-qmp-ufs-phy - qcom,sm8250-qmp-ufs-phy - qcom,sm8350-qmp-ufs-phy + - qcom,sm8450-qmp-ufs-phy - qcom,sm8550-qmp-ufs-phy - qcom,sm8650-qmp-ufs-phy then: properties: clocks: - maxItems: 2 + minItems: 3 + maxItems: 3 clock-names: - maxItems: 2 + items: + - const: ref + - const: ref_aux + - const: qref - if: properties: @@ -130,22 +120,28 @@ allOf: then: properties: clocks: - maxItems: 1 + minItems: 2 + maxItems: 2 clock-names: - maxItems: 1 + items: + - const: ref + - const: qref additionalProperties: false examples: - | #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> + #include <dt-bindings/clock/qcom,rpmh.h> ufs_mem_phy: phy@1d87000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; reg = <0x01d87000 0x1000>; - clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_REF_CLKREF_CLK>; + + clock-names = "ref", "ref_aux", "qref"; power-domains = <&gcc UFS_PHY_GDSC>; diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml index 15d82c67f157b6..1e2d4ddc5391f1 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml @@ -20,15 +20,12 @@ properties: - qcom,ipq8074-qmp-usb3-phy - qcom,ipq9574-qmp-usb3-phy - qcom,msm8996-qmp-usb3-phy - - qcom,msm8998-qmp-usb3-phy - - qcom,qcm2290-qmp-usb3-phy - qcom,sa8775p-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy - qcom,sdm845-qmp-usb3-uni-phy - qcom,sdx55-qmp-usb3-uni-phy - qcom,sdx65-qmp-usb3-uni-phy - qcom,sdx75-qmp-usb3-uni-phy - - qcom,sm6115-qmp-usb3-phy - qcom,sm8150-qmp-usb3-uni-phy - qcom,sm8250-qmp-usb3-uni-phy - qcom,sm8350-qmp-usb3-uni-phy @@ -93,7 +90,6 @@ allOf: - qcom,ipq8074-qmp-usb3-phy - qcom,ipq9574-qmp-usb3-phy - qcom,msm8996-qmp-usb3-phy - - qcom,msm8998-qmp-usb3-phy - qcom,sdx55-qmp-usb3-uni-phy - qcom,sdx65-qmp-usb3-uni-phy - qcom,sdx75-qmp-usb3-uni-phy @@ -113,24 +109,6 @@ allOf: compatible: contains: enum: - - qcom,qcm2290-qmp-usb3-phy - - qcom,sm6115-qmp-usb3-phy - then: - properties: - clocks: - maxItems: 4 - clock-names: - items: - - const: cfg_ahb - - const: ref - - const: com_aux - - const: pipe - - - if: - properties: - compatible: - contains: - enum: - qcom,sa8775p-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy - qcom,sm8150-qmp-usb3-uni-phy diff --git a/Documentation/devicetree/bindings/phy/rockchip,rk3588-hdptx-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,rk3588-hdptx-phy.yaml new file mode 100644 index 00000000000000..54e822c715f3f4 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip,rk3588-hdptx-phy.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip,rk3588-hdptx-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC HDMI/eDP Transmitter Combo PHY + +maintainers: + - Cristian Ciocaltea <cristian.ciocaltea@collabora.com> + +properties: + compatible: + enum: + - rockchip,rk3588-hdptx-phy + + reg: + maxItems: 1 + + clocks: + items: + - description: Reference clock + - description: APB clock + + clock-names: + items: + - const: ref + - const: apb + + "#phy-cells": + const: 0 + + resets: + items: + - description: PHY reset line + - description: APB reset line + - description: INIT reset line + - description: CMN reset line + - description: LANE reset line + - description: ROPLL reset line + - description: LCPLL reset line + + reset-names: + items: + - const: phy + - const: apb + - const: init + - const: cmn + - const: lane + - const: ropll + - const: lcpll + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: Some PHY related data is accessed through GRF regs. + +required: + - compatible + - reg + - clocks + - clock-names + - "#phy-cells" + - resets + - reset-names + - rockchip,grf + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rockchip,rk3588-cru.h> + #include <dt-bindings/reset/rockchip,rk3588-cru.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + phy@fed60000 { + compatible = "rockchip,rk3588-hdptx-phy"; + reg = <0x0 0xfed60000 0x0 0x2000>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>; + clock-names = "ref", "apb"; + #phy-cells = <0>; + resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>, + <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>, + <&cru SRST_HDPTX0_LANE>, <&cru SRST_HDPTX0_ROPLL>, + <&cru SRST_HDPTX0_LCPLL>; + reset-names = "phy", "apb", "init", "cmn", "lane", "ropll", "lcpll"; + rockchip,grf = <&hdptxphy_grf>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml index c7df4cd34197c2..d9e0b2c48e84ac 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml @@ -24,7 +24,7 @@ required: - compatible patternProperties: - "^bank@[0-9a-z]+$": + "^bank@[0-9a-f]+$": $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml index 0942ea60c6cd9b..108719bde0d05c 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml @@ -21,7 +21,7 @@ required: - compatible patternProperties: - "^bank@[0-9a-z]+$": + "^bank@[0-9a-f]+$": $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml index e3c8bde3055940..dc277f2e2edf84 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml @@ -21,7 +21,7 @@ required: - compatible patternProperties: - "^bank@[0-9a-z]+$": + "^bank@[0-9a-f]+$": $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml index c1b03147e8eca8..add83c676327cc 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml @@ -29,7 +29,7 @@ required: - compatible patternProperties: - "^bank@[0-9a-z]+$": + "^bank@[0-9a-f]+$": $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml index 4ec85b8248fa3e..412bbcc276f3b3 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml @@ -29,7 +29,7 @@ required: - compatible patternProperties: - "^bank@[0-9a-z]+$": + "^bank@[0-9a-f]+$": $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index e8abbdad7b5daa..0aa1a53012d6c0 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -20,6 +20,7 @@ such as pull-up, multi drive, etc. Required properties for iomux controller: - compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl" or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl" + or "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl" - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be configured in this periph mode. All the periph and bank need to be describe. @@ -120,6 +121,7 @@ Some requirements for using atmel,at91rm9200-pinctrl binding: For each bank the required properties are: - compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or "microchip,sam9x60-gpio" + or "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio" - reg: physical base address and length of the controller's registers - interrupts: interrupt outputs from the controller - interrupt-controller: marks the device node as an interrupt controller diff --git a/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml new file mode 100644 index 00000000000000..98c310a3c63cda --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/awinic,aw9523-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW9523/AW9523B I2C GPIO Expander + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + The Awinic AW9523/AW9523B I2C GPIO Expander featuring 16 multi-function + I/O, 256 steps PWM mode and interrupt support. + +properties: + compatible: + const: awinic,aw9523-pinctrl + + reg: + maxItems: 1 + + '#gpio-cells': + description: | + Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-controller: true + + gpio-ranges: + maxItems: 1 + + interrupt-controller: true + + interrupts: + maxItems: 1 + description: Specifies the INTN pin IRQ. + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + reset-gpios: + maxItems: 1 + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in + this subnode. + items: + pattern: "^gpio([0-9]|1[0-5])$" + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the + specified pins. + + enum: [ gpio, pwm ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-open-drain: true + drive-push-pull: true + input-enable: true + input-disable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + # Example configuration to drive pins for a keyboard matrix + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + aw9523: gpio-expander@58 { + compatible = "awinic,aw9523-pinctrl"; + reg = <0x58>; + interrupt-parent = <&tlmm>; + interrupts = <50 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 16>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + + keyboard-matrix-col-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + input-disable; + output-low; + }; + + keyboard-matrix-row-pins { + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + bias-pull-up; + drive-open-drain; + input-enable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml index bb61a30321a1c5..482acda88e7328 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml @@ -93,7 +93,8 @@ properties: input-schmitt-disable: true - input-debounce: true + input-debounce: + maxItems: 1 output-low: true diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml index 7f30ec2f1e5411..700ac86c26b69c 100644 --- a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml @@ -45,7 +45,8 @@ properties: maxItems: 1 gpio-reserved-ranges: - maxItems: 1 + minItems: 1 + maxItems: 60 vdd-supply: description: @@ -85,6 +86,8 @@ patternProperties: bias-disable: true + input-enable: true + output-high: true output-low: true @@ -133,6 +136,23 @@ examples: interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; vdd-supply = <&p3v3>; - gpio-reserved-ranges = <5 1>; + gpio-reserved-ranges = <1 2>, <6 1>, <10 1>, <15 1>; + + pinctrl-0 = <&U62160_pins>, <&U62160_ipins>; + pinctrl-names = "default"; + + U62160_pins: cfg-pins { + pins = "gp03", "gp16", "gp20", "gp50", "gp51"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + U62160_ipins: icfg-pins { + pins = "gp04", "gp17", "gp21", "gp52", "gp53"; + function = "gpio"; + input-enable; + bias-pull-up; + }; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt deleted file mode 100644 index 7ca4f6118d9a07..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt +++ /dev/null @@ -1,37 +0,0 @@ -* Freescale i.MX6 UltraLite IOMUX Controller - -Please refer to fsl,imx-pinctrl.txt in this directory for common binding part -and usage. - -Required properties: -- compatible: "fsl,imx6ul-iomuxc" for main IOMUX controller or - "fsl,imx6ull-iomuxc-snvs" for i.MX 6ULL's SNVS IOMUX controller. -- fsl,pins: each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val - input_val> are specified using a PIN_FUNC_ID macro, which can be found in - imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is - the pad setting value like pull-up on this pin. Please refer to i.MX6 UltraLite - Reference Manual for detailed CONFIG settings. - -CONFIG bits definition: -PAD_CTL_HYS (1 << 16) -PAD_CTL_PUS_100K_DOWN (0 << 14) -PAD_CTL_PUS_47K_UP (1 << 14) -PAD_CTL_PUS_100K_UP (2 << 14) -PAD_CTL_PUS_22K_UP (3 << 14) -PAD_CTL_PUE (1 << 13) -PAD_CTL_PKE (1 << 12) -PAD_CTL_ODE (1 << 11) -PAD_CTL_SPEED_LOW (0 << 6) -PAD_CTL_SPEED_MED (1 << 6) -PAD_CTL_SPEED_HIGH (3 << 6) -PAD_CTL_DSE_DISABLE (0 << 3) -PAD_CTL_DSE_260ohm (1 << 3) -PAD_CTL_DSE_130ohm (2 << 3) -PAD_CTL_DSE_87ohm (3 << 3) -PAD_CTL_DSE_65ohm (4 << 3) -PAD_CTL_DSE_52ohm (5 << 3) -PAD_CTL_DSE_43ohm (6 << 3) -PAD_CTL_DSE_37ohm (7 << 3) -PAD_CTL_SRE_FAST (1 << 0) -PAD_CTL_SRE_SLOW (0 << 0) diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.yaml new file mode 100644 index 00000000000000..906b264a9e3cda --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx6ul-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX6UL IOMUX Controller + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + enum: + - fsl,imx6ul-iomuxc + - fsl,imx6ull-iomuxc-snvs + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm/boot/dts/imx6ul-pinfunc.h>. The last integer + CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX6UL Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied: + PAD_CTL_HYS (1 << 16) + PAD_CTL_PUS_100K_DOWN (0 << 14) + PAD_CTL_PUS_47K_UP (1 << 14) + PAD_CTL_PUS_100K_UP (2 << 14) + PAD_CTL_PUS_22K_UP (3 << 14) + PAD_CTL_PUE (1 << 13) + PAD_CTL_PKE (1 << 12) + PAD_CTL_ODE (1 << 11) + PAD_CTL_SPEED_LOW (0 << 6) + PAD_CTL_SPEED_MED (1 << 6) + PAD_CTL_SPEED_HIGH (3 << 6) + PAD_CTL_DSE_DISABLE (0 << 3) + PAD_CTL_DSE_260ohm (1 << 3) + PAD_CTL_DSE_130ohm (2 << 3) + PAD_CTL_DSE_87ohm (3 << 3) + PAD_CTL_DSE_65ohm (4 << 3) + PAD_CTL_DSE_52ohm (5 << 3) + PAD_CTL_DSE_43ohm (6 << 3) + PAD_CTL_DSE_37ohm (7 << 3) + PAD_CTL_SRE_FAST (1 << 0) + PAD_CTL_SRE_SLOW (0 << 0) + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + iomuxc: pinctrl@20e0000 { + compatible = "fsl,imx6ul-iomuxc"; + reg = <0x020e0000 0x4000>; + + mux_uart: uartgrp { + fsl,pins = < + 0x0084 0x0310 0x0000 0 0 0x1b0b1 + 0x0088 0x0314 0x0624 0 3 0x1b0b1 + >; + }; + }; + - | + iomuxc_snvs: pinctrl@2290000 { + compatible = "fsl,imx6ull-iomuxc-snvs"; + reg = <0x02290000 0x4000>; + + pinctrl_snvs_usbc_det: snvsusbcdetgrp { + fsl,pins = < + 0x0010 0x0054 0x0000 0x5 0x0 0x130b0 + >; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml new file mode 100644 index 00000000000000..5f00604bf48c42 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml @@ -0,0 +1,242 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mobileye EyeQ5 pin controller + +description: > + The EyeQ5 pin controller handles the two pin banks of the system. It belongs + to a system-controller block called OLB. + + Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin + muxing supports two functions for each pin: first is GPIO, second is + pin-dependent. + + Pins and groups are bijective. + +maintainers: + - Grégory Clement <gregory.clement@bootlin.com> + - Théo Lebrun <theo.lebrun@bootlin.com> + - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> + +$ref: pinctrl.yaml# + +properties: + compatible: + enum: + - mobileye,eyeq5-pinctrl + + reg: + maxItems: 1 + +patternProperties: + "-pins?$": + type: object + description: Pin muxing configuration. + $ref: pinmux-node.yaml# + additionalProperties: false + properties: + pins: true + function: + enum: [gpio, + # Bank A + timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0, + spi1, refclk0, + # Bank B + timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0] + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + required: + - pins + - function + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + pins: + items: # PA0 - PA28, PB0 - PB22 + pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$' + - if: + properties: + function: + const: timer0 + then: + properties: + pins: + items: + enum: [PA0, PA1] + - if: + properties: + function: + const: timer1 + then: + properties: + pins: + items: + enum: [PA2, PA3] + - if: + properties: + function: + const: timer2 + then: + properties: + pins: + items: + enum: [PA4, PA5] + - if: + properties: + function: + const: timer5 + then: + properties: + pins: + items: + enum: [PA6, PA7, PA8, PA9] + - if: + properties: + function: + const: uart0 + then: + properties: + pins: + items: + enum: [PA10, PA11] + - if: + properties: + function: + const: uart1 + then: + properties: + pins: + items: + enum: [PA12, PA13] + - if: + properties: + function: + const: can0 + then: + properties: + pins: + items: + enum: [PA14, PA15] + - if: + properties: + function: + const: can1 + then: + properties: + pins: + items: + enum: [PA16, PA17] + - if: + properties: + function: + const: spi0 + then: + properties: + pins: + items: + enum: [PA18, PA19, PA20, PA21, PA22] + - if: + properties: + function: + const: spi1 + then: + properties: + pins: + items: + enum: [PA23, PA24, PA25, PA26, PA27] + - if: + properties: + function: + const: refclk0 + then: + properties: + pins: + items: + enum: [PA28] + - if: + properties: + function: + const: timer3 + then: + properties: + pins: + items: + enum: [PB0, PB1] + - if: + properties: + function: + const: timer4 + then: + properties: + pins: + items: + enum: [PB2, PB3] + - if: + properties: + function: + const: timer6 + then: + properties: + pins: + items: + enum: [PB4, PB5, PB6, PB7] + - if: + properties: + function: + const: uart2 + then: + properties: + pins: + items: + enum: [PB8, PB9] + - if: + properties: + function: + const: can2 + then: + properties: + pins: + items: + enum: [PB10, PB11] + - if: + properties: + function: + const: spi2 + then: + properties: + pins: + items: + enum: [PB12, PB13, PB14, PB15, PB16] + - if: + properties: + function: + const: spi3 + then: + properties: + pins: + items: + enum: [PB17, PB18, PB19, PB20, PB21] + - if: + properties: + function: + const: mclk0 + then: + properties: + pins: + items: + enum: [PB22] + +required: + - compatible + - reg + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml index 3e8472898800c5..b55d9c3166598d 100644 --- a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml @@ -152,7 +152,6 @@ patternProperties: description: Debouncing periods in microseconds, one period per interrupt bank found in the controller - $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 4 @@ -160,7 +159,6 @@ patternProperties: description: | 0: Low rate 1: High rate - $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] drive-strength: diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml index 7b7f840ffc4cf1..08442c880f0738 100644 --- a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml @@ -103,7 +103,8 @@ patternProperties: items: pattern: "^gpio1?[0-9]{1,2}$" - input-debounce: true + input-debounce: + maxItems: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml index f3deda9f7127fd..db8224dfba2c1b 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml @@ -10,18 +10,21 @@ maintainers: - Thierry Reding <thierry.reding@gmail.com> - Jon Hunter <jonathanh@nvidia.com> -$ref: nvidia,tegra234-pinmux-common.yaml - properties: compatible: const: nvidia,tegra234-pinmux-aon + reg: + maxItems: 1 + patternProperties: "^pinmux(-[a-z0-9-]+)?$": type: object # pin groups additionalProperties: + $ref: nvidia,tegra234-pinmux-common.yaml + properties: nvidia,pins: items: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml index 4f9de78085e50f..8cf9e4c915ffa6 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml @@ -10,57 +10,43 @@ maintainers: - Thierry Reding <thierry.reding@gmail.com> - Jon Hunter <jonathanh@nvidia.com> -properties: - reg: - items: - - description: pinmux registers - -patternProperties: - "^pinmux(-[a-z0-9-]+)?$": - type: object - - # pin groups - additionalProperties: - $ref: nvidia,tegra-pinmux-common.yaml - # We would typically use unevaluatedProperties here but that has the - # downside that all the properties in the common bindings become valid - # for all chip generations. In this case, however, we want the per-SoC - # bindings to be able to override which of the common properties are - # allowed, since not all pinmux generations support the same sets of - # properties. This way, the common bindings define the format of the - # properties but the per-SoC bindings define which of them apply to a - # given chip. - additionalProperties: false - properties: - nvidia,function: - enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2, - eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3, - pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi, - sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte, - usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd, - i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc, - dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4, - ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb, - displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3, - tsc_alt, istctrl, vi1_alt, dspk1, igpu ] +$ref: nvidia,tegra-pinmux-common.yaml - # out of the common properties, only these are allowed for Tegra234 - nvidia,pins: true - nvidia,pull: true - nvidia,tristate: true - nvidia,schmitt: true - nvidia,enable-input: true - nvidia,open-drain: true - nvidia,lock: true - nvidia,drive-type: true - nvidia,io-hv: true - - required: - - nvidia,pins +properties: + nvidia,function: + enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2, + eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3, + pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi, + sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte, + usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd, + i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc, + dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4, + ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb, + displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3, + tsc_alt, istctrl, vi1_alt, dspk1, igpu ] + + # out of the common properties, only these are allowed for Tegra234 + nvidia,pins: true + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,drive-type: true + nvidia,io-hv: true required: - - compatible - - reg + - nvidia,pins + +# We would typically use unevaluatedProperties here but that has the +# downside that all the properties in the common bindings become valid +# for all chip generations. In this case, however, we want the per-SoC +# bindings to be able to override which of the common properties are +# allowed, since not all pinmux generations support the same sets of +# properties. This way, the common bindings define the format of the +# properties but the per-SoC bindings define which of them apply to a +# given chip. +additionalProperties: false -additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml index 17b865ecfcdaa0..f5a3a881dec4f0 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml @@ -10,18 +10,21 @@ maintainers: - Thierry Reding <thierry.reding@gmail.com> - Jon Hunter <jonathanh@nvidia.com> -$ref: nvidia,tegra234-pinmux-common.yaml - properties: compatible: const: nvidia,tegra234-pinmux + reg: + maxItems: 1 + patternProperties: "^pinmux(-[a-z0-9-]+)?$": type: object # pin groups additionalProperties: + $ref: nvidia,tegra234-pinmux-common.yaml + properties: nvidia,pins: items: diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml index be81ed22a036a3..d0af21a564b44f 100644 --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml @@ -97,7 +97,7 @@ properties: description: disable schmitt-trigger mode input-debounce: - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32-array description: Takes the debounce time in usec as argument or 0 to disable debouncing diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml index bb08ca5a1509e3..bb675c8ec220f5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml @@ -17,7 +17,7 @@ allOf: properties: compatible: - const: qcom,sm4450-pinctrl + const: qcom,sm4450-tlmm reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml index 181cd1676c0a2a..5d84364d13589c 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml @@ -46,6 +46,7 @@ properties: - renesas,pfc-r8a779a0 # R-Car V3U - renesas,pfc-r8a779f0 # R-Car S4-8 - renesas,pfc-r8a779g0 # R-Car V4H + - renesas,pfc-r8a779h0 # R-Car V4M - renesas,pfc-sh73a0 # SH-Mobile AG5 reg: diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml index d2676f92ef5bb8..de6c10ba36c4ec 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/xlnx,zynq-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/xlnx,pinctrl-zynq.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq Pinctrl @@ -28,7 +28,7 @@ description: | properties: compatible: - const: xlnx,zynq-pinctrl + const: xlnx,pinctrl-zynq reg: description: Specifies the base address and size of the SLCR space. @@ -181,7 +181,7 @@ examples: - | #include <dt-bindings/pinctrl/pinctrl-zynq.h> pinctrl0: pinctrl@700 { - compatible = "xlnx,zynq-pinctrl"; + compatible = "xlnx,pinctrl-zynq"; reg = <0x700 0x200>; syscon = <&slcr>; diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index 2ff246cf8b81dd..929b7ef9c1bcda 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -24,6 +24,8 @@ properties: - qcom,msm8917-rpmpd - qcom,msm8939-rpmpd - qcom,msm8953-rpmpd + - qcom,msm8974-rpmpd + - qcom,msm8974pro-pma8084-rpmpd - qcom,msm8976-rpmpd - qcom,msm8994-rpmpd - qcom,msm8996-rpmpd diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt index 75bc20b95688f6..a6c8978964aa16 100644 --- a/Documentation/devicetree/bindings/power/wakeup-source.txt +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -27,7 +27,7 @@ List of legacy properties and respective binding document Documentation/devicetree/bindings/mfd/tc3589x.txt Documentation/devicetree/bindings/input/touchscreen/ads7846.txt 4. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt -5. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt +5. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml 6. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt Examples diff --git a/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml new file mode 100644 index 00000000000000..0e92868a2b689c --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/atmel,hlcdc-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel's HLCDC's PWM controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Claudiu Beznea <claudiu.beznea@tuxon.dev> + +description: + The LCDC integrates a Pulse Width Modulation (PWM) Controller. This block + generates the LCD contrast control signal (LCD_PWM) that controls the + display's contrast by software. LCDC_PWM is an 8-bit PWM signal that can be + converted to an analog voltage with a simple passive filter. LCD display + panels have different backlight specifications in terms of minimum/maximum + values for PWM frequency. If the LCDC PWM frequency range does not match the + LCD display panel, it is possible to use the standalone PWM Controller to + drive the backlight. + +properties: + compatible: + const: atmel,hlcdc-pwm + + "#pwm-cells": + const: 3 + +required: + - compatible + - "#pwm-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt deleted file mode 100644 index afa501bf7f94b5..00000000000000 --- a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt +++ /dev/null @@ -1,29 +0,0 @@ -Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver - -The Atmel HLCDC PWM is subdevice of the HLCDC MFD device. -See ../mfd/atmel-hlcdc.txt for more details. - -Required properties: - - compatible: value should be one of the following: - "atmel,hlcdc-pwm" - - pinctr-names: the pin control state names. Should contain "default". - - pinctrl-0: should contain the pinctrl states described by pinctrl - default. - - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells - bindings defined in pwm.yaml in this directory. - -Example: - - hlcdc: hlcdc@f0030000 { - compatible = "atmel,sama5d3-hlcdc"; - reg = <0xf0030000 0x2000>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; - clock-names = "periph_clk","sys_clk", "slow_clk"; - - hlcdc_pwm: hlcdc-pwm { - compatible = "atmel,hlcdc-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwm>; - #pwm-cells = <3>; - }; - }; diff --git a/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml b/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml new file mode 100644 index 00000000000000..ba6325575ea040 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/marvell,pxa-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell PXA PWM + +maintainers: + - Duje Mihanović <duje.mihanovic@skole.hr> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + enum: + - marvell,pxa250-pwm + - marvell,pxa270-pwm + - marvell,pxa168-pwm + - marvell,pxa910-pwm + + reg: + # Length should be 0x10 + maxItems: 1 + + "#pwm-cells": + # Used for specifying the period length in nanoseconds + const: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - "#pwm-cells" + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/pxa-clock.h> + + pwm0: pwm@40b00000 { + compatible = "marvell,pxa250-pwm"; + reg = <0x40b00000 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; + }; diff --git a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml index 0fbe8a6469eb22..a5c30880161933 100644 --- a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml @@ -24,6 +24,7 @@ properties: - mediatek,mt7629-pwm - mediatek,mt7981-pwm - mediatek,mt7986-pwm + - mediatek,mt7988-pwm - mediatek,mt8183-pwm - mediatek,mt8365-pwm - mediatek,mt8516-pwm diff --git a/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml b/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml new file mode 100644 index 00000000000000..52a59d245cdb13 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/opencores,pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OpenCores PWM controller + +maintainers: + - William Qiu <william.qiu@starfivetech.com> + +description: + The OpenCores PTC ip core contains a PWM controller. When operating in PWM + mode, the PTC core generates binary signal with user-programmable low and + high periods. All PTC counters and registers are 32-bit. + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + items: + - enum: + - starfive,jh7100-pwm + - starfive,jh7110-pwm + - starfive,jh8100-pwm + - const: opencores,pwm-v1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm@12490000 { + compatible = "starfive,jh7110-pwm", "opencores,pwm-v1"; + reg = <0x12490000 0x10000>; + clocks = <&clkgen 181>; + resets = <&rstgen 109>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml index 527864a4d8557b..1d71d4f8f32878 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml @@ -9,9 +9,6 @@ title: Amlogic PWM maintainers: - Heiner Kallweit <hkallweit1@gmail.com> -allOf: - - $ref: pwm.yaml# - properties: compatible: oneOf: @@ -24,31 +21,40 @@ properties: - amlogic,meson-g12a-ee-pwm - amlogic,meson-g12a-ao-pwm-ab - amlogic,meson-g12a-ao-pwm-cd - - amlogic,meson-s4-pwm + deprecated: true - items: - const: amlogic,meson-gx-pwm - const: amlogic,meson-gxbb-pwm + deprecated: true - items: - const: amlogic,meson-gx-ao-pwm - const: amlogic,meson-gxbb-ao-pwm + deprecated: true - items: - const: amlogic,meson8-pwm - const: amlogic,meson8b-pwm + deprecated: true + - enum: + - amlogic,meson8-pwm-v2 + - amlogic,meson-s4-pwm + - items: + - enum: + - amlogic,meson8b-pwm-v2 + - amlogic,meson-gxbb-pwm-v2 + - amlogic,meson-axg-pwm-v2 + - amlogic,meson-g12-pwm-v2 + - const: amlogic,meson8-pwm-v2 reg: maxItems: 1 clocks: minItems: 1 - maxItems: 2 + maxItems: 4 clock-names: - oneOf: - - items: - - enum: [clkin0, clkin1] - - items: - - const: clkin0 - - const: clkin1 + minItems: 1 + maxItems: 2 "#pwm-cells": const: 3 @@ -57,6 +63,79 @@ required: - compatible - reg +allOf: + - $ref: pwm.yaml# + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8-pwm + - amlogic,meson8b-pwm + - amlogic,meson-gxbb-pwm + - amlogic,meson-gxbb-ao-pwm + - amlogic,meson-axg-ee-pwm + - amlogic,meson-axg-ao-pwm + - amlogic,meson-g12a-ee-pwm + - amlogic,meson-g12a-ao-pwm-ab + - amlogic,meson-g12a-ao-pwm-cd + then: + # Obsolete historic bindings tied to the driver implementation + # The clocks provided here are meant to be matched with the input + # known (hard-coded) in the driver and used to select pwm clock + # source. Currently, the linux driver ignores this. + # This is kept to maintain ABI backward compatibility. + properties: + clocks: + maxItems: 2 + clock-names: + oneOf: + - items: + - enum: [clkin0, clkin1] + - items: + - const: clkin0 + - const: clkin1 + + # Newer binding where clock describe the actual clock inputs of the pwm + # block. These are necessary but some inputs may be grounded. + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8-pwm-v2 + then: + properties: + clocks: + minItems: 1 + items: + - description: input clock 0 of the pwm block + - description: input clock 1 of the pwm block + - description: input clock 2 of the pwm block + - description: input clock 3 of the pwm block + clock-names: false + required: + - clocks + + # Newer IP block take a single input per channel, instead of 4 inputs + # for both channels + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-s4-pwm + then: + properties: + clocks: + items: + - description: input clock of PWM channel A + - description: input clock of PWM channel B + clock-names: false + required: + - clocks + additionalProperties: false examples: @@ -68,3 +147,17 @@ examples: clock-names = "clkin0", "clkin1"; #pwm-cells = <3>; }; + - | + pwm@2000 { + compatible = "amlogic,meson8-pwm-v2"; + reg = <0x1000 0x10>; + clocks = <&xtal>, <0>, <&fdiv4>, <&fdiv5>; + #pwm-cells = <3>; + }; + - | + pwm@1000 { + compatible = "amlogic,meson-s4-pwm"; + reg = <0x1000 0x10>; + clocks = <&pwm_src_a>, <&pwm_src_b>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pxa-pwm.txt b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt deleted file mode 100644 index 5ae9f1e3c33896..00000000000000 --- a/Documentation/devicetree/bindings/pwm/pxa-pwm.txt +++ /dev/null @@ -1,30 +0,0 @@ -Marvell PWM controller - -Required properties: -- compatible: should be one or more of: - - "marvell,pxa250-pwm" - - "marvell,pxa270-pwm" - - "marvell,pxa168-pwm" - - "marvell,pxa910-pwm" -- reg: Physical base address and length of the registers used by the PWM channel - Note that one device instance must be created for each PWM that is used, so the - length covers only the register window for one PWM output, not that of the - entire PWM controller. Currently length is 0x10 for all supported devices. -- #pwm-cells: Should be 1. This cell is used to specify the period in - nanoseconds. - -Example PWM device node: - -pwm0: pwm@40b00000 { - compatible = "marvell,pxa250-pwm"; - reg = <0x40b00000 0x10>; - #pwm-cells = <1>; -}; - -Example PWM client node: - -backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 5000000>; - ... -} diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml index f4c1f36e52e9c3..a34e8575465871 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml @@ -47,6 +47,7 @@ properties: 1: HIGH Default is LOW if nothing else is specified. $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 maxItems: 8 items: enum: [0, 1] @@ -57,7 +58,8 @@ properties: regulator and matching GPIO configurations to achieve them. If there are no states in the "states" array, use a fixed regulator instead. $ref: /schemas/types.yaml#/definitions/uint32-matrix - maxItems: 8 + minItems: 2 + maxItems: 256 items: items: - description: Voltage in microvolts diff --git a/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml b/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml new file mode 100644 index 00000000000000..e6ffbc2a229884 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Infineon Buck Regulators with PMBUS interfaces + +maintainers: + - Not Me. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - infineon,ir38060 + - infineon,ir38064 + - infineon,ir38164 + - infineon,ir38263 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@34 { + compatible = "infineon,ir38060"; + reg = <0x34>; + + regulator-min-microvolt = <437500>; + regulator-max-microvolt = <1387500>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt deleted file mode 100644 index 451cc4e86b0189..00000000000000 --- a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt +++ /dev/null @@ -1,144 +0,0 @@ -MCP16502 PMIC - -Required properties: -- compatible: "microchip,mcp16502" -- reg: I2C slave address -- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during - suspend-to-ram, keeping the PMIC into HIBERNATE mode; this - property is optional; -- regulators: A node that houses a sub-node for each regulator within - the device. Each sub-node is identified using the node's - name. The content of each sub-node is defined by the - standard binding for regulators; see regulator.txt. - -Regulators of MCP16502 PMIC: -1) VDD_IO - Buck (1.2 - 3.7 V) -2) VDD_DDR - Buck (0.6 - 1.85 V) -3) VDD_CORE - Buck (0.6 - 1.85 V) -4) VDD_OTHER - BUCK (0.6 - 1.85 V) -5) LDO1 - LDO (1.2 - 3.7 V) -6) LDO2 - LDO (1.2 - 3.7 V) - -Regulator modes: -2 - FPWM: higher precision, higher consumption -4 - AutoPFM: lower precision, lower consumption - -Each regulator is defined using the standard binding for regulators. - -Example: - -mcp16502@5b { - compatible = "microchip,mcp16502"; - reg = <0x5b>; - status = "okay"; - lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>; - - regulators { - VDD_IO { - regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; - regulator-initial-mode = <2>; - regulator-allowed-modes = <2>, <4>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-mode = <4>; - }; - }; - - VDD_DDR { - regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; - regulator-initial-mode = <2>; - regulator-allowed-modes = <2>, <4>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - }; - - VDD_CORE { - regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; - regulator-initial-mode = <2>; - regulator-allowed-modes = <2>, <4>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-mode = <4>; - }; - }; - - VDD_OTHER { - regulator-name = "VDD_OTHER"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; - regulator-initial-mode = <2>; - regulator-allowed-modes = <2>, <4>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-mode = <4>; - }; - }; - - LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - }; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - LDO2 { - regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - }; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - }; -}; diff --git a/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml b/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml new file mode 100644 index 00000000000000..1aca3646789eff --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MCP16502 - High-Performance PMIC + +maintainers: + - Andrei Simion <andrei.simion@microchip.com> + +description: + The MCP16502 is an optimally integrated PMIC compatible + with Microchip's eMPUs(Embedded Microprocessor Units), + requiring Dynamic Voltage Scaling (DVS) with the use + of High-Performance mode (HPM). + +properties: + compatible: + const: microchip,mcp16502 + + lpm-gpios: + maxItems: 1 + description: GPIO for LPM pin. + Note that this GPIO must remain high during + suspend-to-ram, keeping the PMIC into HIBERNATE mode. + + reg: + maxItems: 1 + + regulators: + type: object + additionalProperties: false + description: List of regulators and its properties. + + patternProperties: + "^(VDD_(IO|CORE|DDR|OTHER)|LDO[1-2])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + properties: + regulator-initial-mode: + enum: [2, 4] + default: 2 + description: Initial operating mode + + regulator-allowed-modes: + items: + enum: [2, 4] + description: Supported modes + 2 - FPWM higher precision, higher consumption + 4 - AutoPFM lower precision, lower consumption + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + + regulators { + VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1250000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml index 534f87e9871630..33ae1f786802ec 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -19,8 +19,15 @@ allOf: properties: compatible: - enum: - - qcom,pm8150b-vbus-reg + oneOf: + - enum: + - qcom,pm8150b-vbus-reg + - items: + - enum: + - qcom,pm4125-vbus-reg + - qcom,pm6150-vbus-reg + - qcom,pmi632-vbus-reg + - const: qcom,pm8150b-vbus-reg reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml new file mode 100644 index 00000000000000..6a6d1a3d6fa7e7 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps65132.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS65132 Dual Output Power Regulators + +maintainers: + - devicetree@vger.kernel.org + +description: | + The TPS65132 is designed to supply positive/negative driven applications. + + Datasheet is available at: + https://www.ti.com/lit/gpn/tps65132 + +properties: + compatible: + enum: + - ti,tps65132 + + reg: + maxItems: 1 + +patternProperties: + "^out[pn]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single regulator. + + properties: + enable-gpios: + maxItems: 1 + description: + GPIO specifier to enable the GPIO control (on/off) for regulator. + + active-discharge-gpios: + maxItems: 1 + description: + GPIO specifier to actively discharge the delay mechanism. + + ti,active-discharge-time-us: + description: Regulator active discharge time in microseconds. + + dependencies: + active-discharge-gpios: [ 'ti,active-discharge-time-us' ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + + outp { + regulator-name = "outp"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + }; + + outn { + regulator-name = "outn"; + regulator-boot-on; + regulator-always-on; + regulator-active-discharge = <0>; + enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt deleted file mode 100644 index 3a3505520c692b..00000000000000 --- a/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt +++ /dev/null @@ -1,46 +0,0 @@ -TPS65132 regulators - -Required properties: -- compatible: "ti,tps65132" -- reg: I2C slave address - -Optional Subnode: -Device supports two regulators OUTP and OUTN. A sub node within the - device node describe the properties of these regulators. The sub-node - names must be as follows: - -For regulator outp, the sub node name should be "outp". - -For regulator outn, the sub node name should be "outn". - --enable-gpios:(active high, output) Regulators are controlled by the input pins. - If it is connected to GPIO through host system then provide the - gpio number as per gpio.txt. --active-discharge-gpios: (active high, output) Some configurations use delay mechanisms - on the enable pin, to keep the regulator enabled for some time after - the enable signal goes low. This GPIO is used to actively discharge - the delay mechanism. Requires specification of ti,active-discharge-time-us --ti,active-discharge-time-us: how long the active discharge gpio should be - asserted for during active discharge, in microseconds. - -Each regulator is defined using the standard binding for regulators. - -Example: - - tps65132@3e { - compatible = "ti,tps65132"; - reg = <0x3e>; - - outp { - regulator-name = "outp"; - regulator-boot-on; - regulator-always-on; - enable-gpios = <&gpio 23 0>; - }; - - outn { - regulator-name = "outn"; - regulator-boot-on; - regulator-always-on; - regulator-active-discharge = <0>; - enable-gpios = <&gpio 40 0>; - }; - }; diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml index 09102dda4942c1..507f98f73d2354 100644 --- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml @@ -47,7 +47,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: If present, name (or relative path) of the file within the firmware search path containing the firmware image used when @@ -115,7 +115,7 @@ patternProperties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: If present, name (or relative path) of the file within the firmware search path containing the firmware image used when diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml index 884158bccd5074..3766d4513b3790 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml @@ -18,7 +18,6 @@ properties: const: qcom,glink-rpm label: - $ref: /schemas/types.yaml#/definitions/string description: Name of the edge, used for debugging and identification purposes. The node name will be used if this is not present. diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml index eb868a7ff4cd81..ad45fd00ae346e 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml @@ -46,7 +46,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml index c054b84fdcd5c5..66b455d0a8e327 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml @@ -45,7 +45,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml index b6bd3343858450..9381c7022ff499 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml @@ -80,7 +80,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: The name of the firmware which should be loaded for this remote processor. diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml index 4744a37b2b5d75..45ee9fbe09664a 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml @@ -42,7 +42,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml index 02828723591220..758adb06c8ddd9 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml @@ -47,7 +47,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml index f7e40fb166da1f..c1a3cc308bdb2d 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml @@ -42,7 +42,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml index 3e4a03eb4532b8..7286b2baa19f2a 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml @@ -36,7 +36,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core smd-edge: false diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml index 238c6e5e67c569..d67386c50fa4d6 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml @@ -46,7 +46,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml index 53cea8e53a311e..4b9fb74fb9e966 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml @@ -47,7 +47,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml index 58120829fb06f5..73fda7565cd12f 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml @@ -19,6 +19,11 @@ properties: - qcom,sm8550-adsp-pas - qcom,sm8550-cdsp-pas - qcom,sm8550-mpss-pas + - qcom,sm8650-adsp-pas + - qcom,sm8650-cdsp-pas + - qcom,sm8650-mpss-pas + - qcom,x1e80100-adsp-pas + - qcom,x1e80100-cdsp-pas reg: maxItems: 1 @@ -49,6 +54,8 @@ properties: - description: Memory region for main Firmware authentication - description: Memory region for Devicetree Firmware authentication - description: DSM Memory region + - description: DSM Memory region 2 + - description: Memory region for Qlink Logging required: - compatible @@ -63,6 +70,9 @@ allOf: enum: - qcom,sm8550-adsp-pas - qcom,sm8550-cdsp-pas + - qcom,sm8650-adsp-pas + - qcom,x1e80100-adsp-pas + - qcom,x1e80100-cdsp-pas then: properties: interrupts: @@ -71,7 +81,26 @@ allOf: maxItems: 5 memory-region: maxItems: 2 - else: + - if: + properties: + compatible: + enum: + - qcom,sm8650-cdsp-pas + then: + properties: + interrupts: + maxItems: 5 + interrupt-names: + maxItems: 5 + memory-region: + minItems: 3 + maxItems: 3 + - if: + properties: + compatible: + enum: + - qcom,sm8550-mpss-pas + then: properties: interrupts: minItems: 6 @@ -79,12 +108,29 @@ allOf: minItems: 6 memory-region: minItems: 3 + maxItems: 3 + - if: + properties: + compatible: + enum: + - qcom,sm8650-mpss-pas + then: + properties: + interrupts: + minItems: 6 + interrupt-names: + minItems: 6 + memory-region: + minItems: 5 + maxItems: 5 - if: properties: compatible: enum: - qcom,sm8550-adsp-pas + - qcom,sm8650-adsp-pas + - qcom,x1e80100-adsp-pas then: properties: power-domains: @@ -101,6 +147,7 @@ allOf: compatible: enum: - qcom,sm8550-mpss-pas + - qcom,sm8650-mpss-pas then: properties: power-domains: @@ -116,6 +163,8 @@ allOf: compatible: enum: - qcom,sm8550-cdsp-pas + - qcom,sm8650-cdsp-pas + - qcom,x1e80100-cdsp-pas then: properties: power-domains: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml index 45eb42bd3c2cd8..8e033b22d28cfa 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml @@ -51,7 +51,7 @@ properties: - const: stop-ack firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Relative firmware image path for the WCNSS core. Defaults to "wcnss.mdt". diff --git a/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml b/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml new file mode 100644 index 00000000000000..062b4518347bd0 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/mobileye,eyeq5-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mobileye EyeQ5 reset controller + +description: + The EyeQ5 reset driver handles three reset domains. Its registers live in a + shared region called OLB. + +maintainers: + - Grégory Clement <gregory.clement@bootlin.com> + - Théo Lebrun <theo.lebrun@bootlin.com> + - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> + +properties: + compatible: + const: mobileye,eyeq5-reset + + reg: + maxItems: 3 + + reg-names: + items: + - const: d0 + - const: d1 + - const: d2 + + "#reset-cells": + const: 2 + description: + The first cell is the domain (0 to 2 inclusive) and the second one is the + reset index inside that domain. + +required: + - compatible + - reg + - reg-names + - "#reset-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml b/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml new file mode 100644 index 00000000000000..76e1931f090829 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/sophgo,sg2042-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SG2042 SoC Reset Controller + +maintainers: + - Chen Wang <unicorn_wang@outlook.com> + +properties: + compatible: + const: sophgo,sg2042-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + rstgen: reset-controller@c00 { + compatible = "sophgo,sg2042-reset"; + reg = <0xc00 0xc>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 9d8670c00e3b3b..b252c3966b8bf0 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -75,6 +75,10 @@ properties: - riscv,sv57 - riscv,none + reg: + description: + The hart ID of this CPU node. + riscv,cbom-block-size: $ref: /schemas/types.yaml#/definitions/uint32 description: diff --git a/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml index 3ce45456d867e1..b38f8252342eeb 100644 --- a/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml +++ b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml @@ -21,6 +21,10 @@ properties: - enum: - microchip,sama7g5-trng - const: atmel,at91sam9g45-trng + - items: + - enum: + - microchip,sam9x7-trng + - const: microchip,sam9x60-trng clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml b/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml index a16c355dcd1132..fcf52d2cac9ec0 100644 --- a/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml @@ -12,7 +12,7 @@ allOf: maintainers: - Alessandro Zummo <a.zummo@towertech.it> - Alexandre Belloni <alexandre.belloni@bootlin.com> - - Rob Herring <robh+dt@kernel.org> + - Rob Herring <robh@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml index e35ad1109efc8b..2129247d7c816d 100644 --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml @@ -55,6 +55,7 @@ required: allOf: - $ref: serial.yaml# + - $ref: rs485.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml index 3a5b59f5d3e35d..3f9ace89dee902 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -30,6 +30,7 @@ properties: - items: - enum: - fsl,imx93-lpuart + - fsl,imx95-lpuart - const: fsl,imx8ulp-lpuart - const: fsl,imx7ulp-lpuart - items: diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index 2046e2dc0a3d19..9480ed30915c9c 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -59,6 +59,7 @@ properties: - renesas,hscif-r8a779a0 # R-Car V3U - renesas,hscif-r8a779f0 # R-Car S4-8 - renesas,hscif-r8a779g0 # R-Car V4H + - renesas,hscif-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-hscif # R-Car Gen4 - const: renesas,hscif # generic HSCIF compatible UART diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 133259ed3a34c5..0f0131026911cd 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -143,6 +143,8 @@ allOf: then: required: - samsung,uart-fifosize + properties: + reg-io-width: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 65804ca274ae75..ffc9198ae21469 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -88,7 +88,7 @@ properties: TX FIFO threshold configuration (in bytes). patternProperties: - "^(bluetooth|bluetooth-gnss|gnss|gps|mcu)$": + "^(bluetooth|bluetooth-gnss|gnss|gps|mcu|onewire)$": if: type: object then: diff --git a/Documentation/devicetree/bindings/serial/st,asc.yaml b/Documentation/devicetree/bindings/serial/st,asc.yaml new file mode 100644 index 00000000000000..f2083388f36b48 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/st,asc.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/st,asc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi SoCs Serial Port + +maintainers: + - Patrice Chotard <patrice.chotard@foss.st.com> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: st,asc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + st,hw-flow-ctrl: + description: When set, enable hardware flow control. + type: boolean + + st,force-m1: + description: When set, force asc to be in Mode-1. This is recommended for + high bit rates above 19.2K. + type: boolean + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/stih407-clks.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + serial@9830000 { + compatible = "st,asc"; + reg = <0x9830000 0x2c>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + }; +... diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 1df8ffe95fc615..62f97da1b2fd7c 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -58,6 +58,9 @@ properties: wakeup-source: true + power-domains: + maxItems: 1 + rx-threshold: description: If value is set to 1, RX FIFO threshold is disabled. diff --git a/Documentation/devicetree/bindings/serial/st-asc.txt b/Documentation/devicetree/bindings/serial/st-asc.txt deleted file mode 100644 index a1b9b6f3490aab..00000000000000 --- a/Documentation/devicetree/bindings/serial/st-asc.txt +++ /dev/null @@ -1,18 +0,0 @@ -*st-asc(Serial Port) - -Required properties: -- compatible : Should be "st,asc". -- reg, reg-names, interrupts, interrupt-names : Standard way to define device - resources with names. look in - Documentation/devicetree/bindings/resource-names.txt - -Optional properties: -- st,hw-flow-ctrl bool flag to enable hardware flow control. -- st,force-m1 bool flat to force asc to be in Mode-1 recommended - for high bit rates (above 19.2K) -Example: -serial@fe440000{ - compatible = "st,asc"; - reg = <0xfe440000 0x2c>; - interrupts = <0 209 0>; -}; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx-anatop.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx-anatop.yaml new file mode 100644 index 00000000000000..c4ae4f28422b20 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx-anatop.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx-anatop.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ANATOP register + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx6sl-anatop + - fsl,imx6sll-anatop + - fsl,imx6sx-anatop + - fsl,imx6ul-anatop + - fsl,imx7d-anatop + - const: fsl,imx6q-anatop + - const: syscon + - const: simple-mfd + - items: + - const: fsl,imx6q-anatop + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + interrupts: + items: + - description: Temperature sensor event + - description: Brown-out event on either of the support regulators + - description: Brown-out event on either the core, gpu or soc regulators + + tempmon: + type: object + unevaluatedProperties: false + $ref: /schemas/thermal/imx-thermal.yaml + +patternProperties: + "regulator-((1p1)|(2p5)|(3p0)|(vddcore)|(vddpu)|(vddsoc))$": + type: object + unevaluatedProperties: false + $ref: /schemas/regulator/anatop-regulator.yaml + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6ul-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + anatop: anatop@20c8000 { + compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", + "syscon", "simple-mfd"; + reg = <0x020c8000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + + reg_3p0: regulator-3p0 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + + reg_arm: regulator-vddcore { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml index 1da1b758b4ae50..8451cb4dd87c6a 100644 --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml @@ -17,7 +17,23 @@ properties: compatible: oneOf: - items: - - const: fsl,imx8mq-iomuxc-gpr + - enum: + - fsl,imx6q-iomuxc-gpr + - fsl,imx8mq-iomuxc-gpr + - const: syscon + - const: simple-mfd + - items: + - enum: + - fsl,imx6sl-iomuxc-gpr + - fsl,imx6sll-iomuxc-gpr + - fsl,imx6ul-iomuxc-gpr + - const: fsl,imx6q-iomuxc-gpr + - const: syscon + - items: + - enum: + - fsl,imx6sx-iomuxc-gpr + - fsl,imx7d-iomuxc-gpr + - const: fsl,imx6q-iomuxc-gpr - const: syscon - const: simple-mfd - items: diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml index 1be4ce2a45e8e6..bd1cdaa4f54b07 100644 --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml @@ -27,8 +27,8 @@ properties: const: 1 power-domains: - minItems: 8 - maxItems: 8 + minItems: 10 + maxItems: 10 power-domain-names: items: @@ -40,10 +40,12 @@ properties: - const: trng - const: hdmi-tx - const: hdmi-tx-phy + - const: hdcp + - const: hrv clocks: - minItems: 4 - maxItems: 4 + minItems: 5 + maxItems: 5 clock-names: items: @@ -51,6 +53,7 @@ properties: - const: axi - const: ref_266m - const: ref_24m + - const: fdcc interconnects: maxItems: 3 @@ -82,12 +85,15 @@ examples: clocks = <&clk IMX8MP_CLK_HDMI_APB>, <&clk IMX8MP_CLK_HDMI_ROOT>, <&clk IMX8MP_CLK_HDMI_REF_266M>, - <&clk IMX8MP_CLK_HDMI_24M>; - clock-names = "apb", "axi", "ref_266m", "ref_24m"; + <&clk IMX8MP_CLK_HDMI_24M>, + <&clk IMX8MP_CLK_HDMI_FDCC_TST>; + clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc"; power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, - <&pgc_hdmimix>, <&pgc_hdmi_phy>; + <&pgc_hdmimix>, <&pgc_hdmi_phy>, + <&pgc_hdmimix>, <&pgc_hdmimix>; power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng", - "hdmi-tx", "hdmi-tx-phy"; + "hdmi-tx", "hdmi-tx-phy", + "hdcp", "hrv"; #power-domain-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index d3f3259ef77d5c..4310bae6c58ef3 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -23,6 +23,7 @@ properties: oneOf: - items: - enum: + - qcom,qcm6490-pmic-glink - qcom,sc8180x-pmic-glink - qcom,sc8280xp-pmic-glink - qcom,sm8350-pmic-glink diff --git a/Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml b/Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml new file mode 100644 index 00000000000000..89a67f8e33b6bb --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,asoc-wm8904.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel wm8904 audio codec complex + +maintainers: + - Dharma Balasubiramani <dharma.b@microchip.com> + +description: + The ASoC audio complex configuration for Atmel with WM8904 audio codec. + +properties: + compatible: + const: atmel,asoc-wm8904 + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller. + + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the WM8731 audio codec. + + atmel,audio-routing: + description: + A list of the connections between audio components. Each entry is a pair + of strings, the first being the connection's sink, the second being the + connection's source. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + items: + enum: + # Board Connectors + - Headphone Jack + - Line In Jack + - Mic + # WM8904 CODEC Pins + - IN1L + - IN1R + - IN2L + - IN2R + - IN3L + - IN3R + - HPOUTL + - HPOUTR + - LINEOUTL + - LINEOUTR + - MICBIAS + +required: + - compatible + - atmel,model + - atmel,audio-routing + - atmel,ssc-controller + - atmel,audio-codec + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + + atmel,model = "wm8904 @ AT91SAM9N12EK"; + + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + }; diff --git a/Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml b/Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml new file mode 100644 index 00000000000000..33717b728f636a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,sam9x5-wm8731-audio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel at91sam9x5ek wm8731 audio complex + +maintainers: + - Dharma Balasubiramani <dharma.b@microchip.com> + +description: + The audio complex configuration for Atmel at91sam9x5ek with WM8731 audio codec. + +properties: + compatible: + const: atmel,sam9x5-wm8731-audio + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller. + + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the WM8731 audio codec. + + atmel,audio-routing: + description: + A list of the connections between audio components. Each entry is a pair + of strings, the first being the connection's sink, the second being the + connection's source. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + items: + enum: + # Board Connectors + - Headphone Jack + - Line In Jack + + # CODEC Pins + - LOUT + - ROUT + - LHPOUT + - RHPOUT + - LLINEIN + - RLINEIN + - MICIN + +required: + - compatible + - atmel,model + - atmel,ssc-controller + - atmel,audio-codec + - atmel,audio-routing + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,sam9x5-wm8731-audio"; + + atmel,model = "wm8731 @ AT91SAM9X5EK"; + + atmel,audio-routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line In Jack", + "RLINEIN", "Line In Jack"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml index 43d04702ac2d88..ae3162fcfe02f7 100644 --- a/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml +++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml @@ -18,7 +18,12 @@ description: properties: compatible: - const: atmel,sama5d2-classd + oneOf: + - items: + - const: atmel,sama5d2-classd + - items: + - const: microchip,sam9x7-classd + - const: atmel,sama5d2-classd reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt deleted file mode 100644 index 8facbce53db86a..00000000000000 --- a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt +++ /dev/null @@ -1,35 +0,0 @@ -* Atmel at91sam9x5ek wm8731 audio complex - -Required properties: - - compatible: "atmel,sam9x5-wm8731-audio" - - atmel,model: The user-visible name of this sound complex. - - atmel,ssc-controller: The phandle of the SSC controller - - atmel,audio-codec: The phandle of the WM8731 audio codec - - atmel,audio-routing: A list of the connections between audio components. - Each entry is a pair of strings, the first being the connection's sink, - the second being the connection's source. - -Available audio endpoints for the audio-routing table: - -Board connectors: - * Headphone Jack - * Line In Jack - -wm8731 pins: -cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml - -Example: -sound { - compatible = "atmel,sam9x5-wm8731-audio"; - - atmel,model = "wm8731 @ AT91SAM9X5EK"; - - atmel,audio-routing = - "Headphone Jack", "RHPOUT", - "Headphone Jack", "LHPOUT", - "LLINEIN", "Line In Jack", - "RLINEIN", "Line In Jack"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8731>; -}; diff --git a/Documentation/devicetree/bindings/sound/atmel-wm8904.txt b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt deleted file mode 100644 index 8bbe50c884b696..00000000000000 --- a/Documentation/devicetree/bindings/sound/atmel-wm8904.txt +++ /dev/null @@ -1,55 +0,0 @@ -Atmel ASoC driver with wm8904 audio codec complex - -Required properties: - - compatible: "atmel,asoc-wm8904" - - atmel,model: The user-visible name of this sound complex. - - atmel,audio-routing: A list of the connections between audio components. - Each entry is a pair of strings, the first being the connection's sink, - the second being the connection's source. Valid names for sources and - sinks are the WM8904's pins, and the jacks on the board: - - WM8904 pins: - - * IN1L - * IN1R - * IN2L - * IN2R - * IN3L - * IN3R - * HPOUTL - * HPOUTR - * LINEOUTL - * LINEOUTR - * MICBIAS - - Board connectors: - - * Headphone Jack - * Line In Jack - * Mic - - - atmel,ssc-controller: The phandle of the SSC controller - - atmel,audio-codec: The phandle of the WM8904 audio codec - -Optional properties: - - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt - -Example: -sound { - compatible = "atmel,asoc-wm8904"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_mck>; - - atmel,model = "wm8904 @ AT91SAM9N12EK"; - - atmel,audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "IN2L", "Line In Jack", - "IN2R", "Line In Jack", - "Mic", "MICBIAS", - "IN1L", "Mic"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8904>; -}; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml index b13c08de505e41..28b27e7e45de6b 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml @@ -51,7 +51,7 @@ definitions: - $ref: /schemas/types.yaml#/definitions/phandle clocks: description: Indicates system clock - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 system-clock-frequency: $ref: simple-card.yaml#/definitions/system-clock-frequency system-clock-direction-out: diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml index 4c9acb8d4c4c61..70f6c62aedca84 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml @@ -25,6 +25,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + '#sound-dai-cells': const: 1 diff --git a/Documentation/devicetree/bindings/sound/cs4341.txt b/Documentation/devicetree/bindings/sound/cs4341.txt index 12b4aa8ef0dbe1..c1d5c8ad1a36a5 100644 --- a/Documentation/devicetree/bindings/sound/cs4341.txt +++ b/Documentation/devicetree/bindings/sound/cs4341.txt @@ -9,7 +9,7 @@ Required properties: number for SPI. For required properties on I2C-bus, please consult -Documentation/devicetree/bindings/i2c/i2c.txt +dtschema schemas/i2c/i2c-controller.yaml For required properties on SPI-bus, please consult Documentation/devicetree/bindings/spi/spi-bus.txt diff --git a/Documentation/devicetree/bindings/sound/everest,es8326.yaml b/Documentation/devicetree/bindings/sound/everest,es8326.yaml index 07781408e78820..8c82d47375ec76 100644 --- a/Documentation/devicetree/bindings/sound/everest,es8326.yaml +++ b/Documentation/devicetree/bindings/sound/everest,es8326.yaml @@ -38,6 +38,7 @@ properties: default: 0x0f everest,mic1-src: + deprecated: true $ref: /schemas/types.yaml#/definitions/uint8 description: the value of reg 2A when headset plugged. @@ -46,6 +47,7 @@ properties: default: 0x22 everest,mic2-src: + deprecated: true $ref: /schemas/types.yaml#/definitions/uint8 description: the value of reg 2A when headset unplugged. @@ -87,7 +89,7 @@ properties: 0 means the chip detect jack type again after button released. minimum: 0 maximum: 0x7f - default: 0x45 + default: 0x00 required: - compatible @@ -107,10 +109,8 @@ examples: clocks = <&clks 10>; clock-names = "mclk"; #sound-dai-cells = <0>; - everest,mic1-src = [22]; - everest,mic2-src = [44]; everest,jack-pol = [0e]; everest,interrupt-src = [08]; - everest,interrupt-clk = [45]; + everest,interrupt-clk = [00]; }; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt deleted file mode 100644 index 998b4c8a7f78af..00000000000000 --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt +++ /dev/null @@ -1,80 +0,0 @@ -Freescale Asynchronous Sample Rate Converter (ASRC) Controller - -The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a -signal associated with an input clock into a signal associated with a different -output clock. The driver currently works as a Front End of DPCM with other Back -Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support -three substreams within totally 10 channels. - -Required properties: - - - compatible : Compatible list, should contain one of the following - compatibles: - "fsl,imx35-asrc", - "fsl,imx53-asrc", - "fsl,imx8qm-asrc", - "fsl,imx8qxp-asrc", - - - reg : Offset and length of the register set for the device. - - - interrupts : Contains the spdif interrupt. - - - dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. - - - dma-names : Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc". - - - clocks : Contains an entry for each entry in clock-names. - - - clock-names : Contains the following entries - "mem" Peripheral access clock to access registers. - "ipg" Peripheral clock to driver module. - "asrck_<0-f>" Clock sources for input and output clock. - "spba" The spba clock is required when ASRC is placed as a - bus slave of the Shared Peripheral Bus and when two - or more bus masters (CPU, DMA or DSP) try to access - it. This property is optional depending on the SoC - design. - - - fsl,asrc-rate : Defines a mutual sample rate used by DPCM Back Ends. - - - fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends. - - - fsl,asrc-clk-map : Defines clock map used in driver. which is required - by imx8qm/imx8qxp platform - <0> - select the map for asrc0 in imx8qm/imx8qxp - <1> - select the map for asrc1 in imx8qm/imx8qxp - -Optional properties: - - - big-endian : If this property is absent, the little endian mode - will be in use as default. Otherwise, the big endian - mode will be in use for all the device registers. - - - fsl,asrc-format : Defines a mutual sample format used by DPCM Back - Ends, which can replace the fsl,asrc-width. - The value is 2 (S16_LE), or 6 (S24_LE). - -Example: - -asrc: asrc@2034000 { - compatible = "fsl,imx53-asrc"; - reg = <0x02034000 0x4000>; - interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 107>, <&clks 107>, <&clks 0>, - <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, - <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, - <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, - <&clks 107>, <&clks 0>, <&clks 0>; - clock-names = "mem", "ipg", "asrck0", - "asrck_1", "asrck_2", "asrck_3", "asrck_4", - "asrck_5", "asrck_6", "asrck_7", "asrck_8", - "asrck_9", "asrck_a", "asrck_b", "asrck_c", - "asrck_d", "asrck_e", "asrck_f"; - dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, - <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; - dma-names = "rxa", "rxb", "rxc", - "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; - fsl,asrc-width = <16>; -}; diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml index a680d7aff2373c..0782f3f9947f85 100644 --- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml @@ -51,8 +51,8 @@ properties: - const: ctx3_tx firmware-name: - $ref: /schemas/types.yaml#/definitions/string - const: imx/easrc/easrc-imx8mn.bin + items: + - const: imx/easrc/easrc-imx8mn.bin description: The coefficient table for the filters fsl,asrc-rate: diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml new file mode 100644 index 00000000000000..bfef2fcb75b145 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,imx-asrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Asynchronous Sample Rate Converter (ASRC) Controller + +description: + The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of + a signal associated with an input clock into a signal associated with a + different output clock. The driver currently works as a Front End of DPCM + with other Back Ends Audio controller such as ESAI, SSI and SAI. It has + three pairs to support three substreams within totally 10 channels. + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx35-asrc + - fsl,imx53-asrc + - fsl,imx8qm-asrc + - fsl,imx8qxp-asrc + - items: + - enum: + - fsl,imx6sx-asrc + - fsl,imx6ul-asrc + - const: fsl,imx53-asrc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + maxItems: 6 + + dma-names: + items: + - const: rxa + - const: rxb + - const: rxc + - const: txa + - const: txb + - const: txc + + clocks: + maxItems: 19 + + clock-names: + items: + - const: mem + - const: ipg + - const: asrck_0 + - const: asrck_1 + - const: asrck_2 + - const: asrck_3 + - const: asrck_4 + - const: asrck_5 + - const: asrck_6 + - const: asrck_7 + - const: asrck_8 + - const: asrck_9 + - const: asrck_a + - const: asrck_b + - const: asrck_c + - const: asrck_d + - const: asrck_e + - const: asrck_f + - const: spba + + fsl,asrc-rate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The mutual sample rate used by DPCM Back Ends + + fsl,asrc-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The mutual sample width used by DPCM Back Ends + enum: [16, 24] + + fsl,asrc-clk-map: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines clock map used in driver + <0> - select the map for asrc0 in imx8qm/imx8qxp + <1> - select the map for asrc1 in imx8qm/imx8qxp + enum: [0, 1] + + big-endian: + type: boolean + description: + If this property is absent, the little endian mode will be in use as + default. Otherwise, the big endian mode will be in use for all the + device registers. + + fsl,asrc-format: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines a mutual sample format used by DPCM Back Ends, which can + replace the fsl,asrc-width. The value is 2 (S16_LE), or 6 (S24_LE). + enum: [2, 6] + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + - clocks + - clock-names + - fsl,asrc-rate + - fsl,asrc-width + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qm-asrc + - fsl,imx8qxp-asrc + then: + required: + - fsl,asrc-clk-map + else: + properties: + fsl,asrc-clk-map: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/imx6qdl-clock.h> + asrc: asrc@2034000 { + compatible = "fsl,imx53-asrc"; + reg = <0x02034000 0x4000>; + interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_ASRC_IPG>, + <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>, + <&clks IMX6QDL_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck_0", + "asrck_1", "asrck_2", "asrck_3", "asrck_4", + "asrck_5", "asrck_6", "asrck_7", "asrck_8", + "asrck_9", "asrck_a", "asrck_b", "asrck_c", + "asrck_d", "asrck_e", "asrck_f", "spba"; + dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, + <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; + dma-names = "rxa", "rxb", "rxc", + "txa", "txb", "txc"; + fsl,asrc-rate = <48000>; + fsl,asrc-width = <16>; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml index b7e60583563918..c1e9803fc113c0 100644 --- a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml @@ -15,10 +15,16 @@ description: | properties: compatible: - enum: - - fsl,imx8mm-micfil - - fsl,imx8mp-micfil - - fsl,imx93-micfil + oneOf: + - items: + - enum: + - fsl,imx95-micfil + - const: fsl,imx93-micfil + + - enum: + - fsl,imx8mm-micfil + - fsl,imx8mp-micfil + - fsl,imx93-micfil reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml index 088c26b001cc02..2456d958adeef6 100644 --- a/Documentation/devicetree/bindings/sound/fsl,sai.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml @@ -39,6 +39,7 @@ properties: - fsl,imx8qm-sai - fsl,imx8ulp-sai - fsl,imx93-sai + - fsl,imx95-sai - fsl,vf610-sai reg: @@ -75,12 +76,17 @@ properties: - const: pll11k minItems: 4 + power-domains: + maxItems: 1 + dmas: + minItems: 1 items: - description: DMA controller phandle and request line for RX - description: DMA controller phandle and request line for TX dma-names: + minItems: 1 items: - const: rx - const: tx diff --git a/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml b/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml index 66993d378aaf59..5e11ce2c13aca1 100644 --- a/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml +++ b/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml @@ -51,7 +51,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Filters coefficients file to load. If this property is omitted, internal filters are disabled. diff --git a/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml index 651f61c7c25a00..fb630a184350bd 100644 --- a/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml +++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml @@ -24,9 +24,14 @@ properties: const: 0 compatible: - enum: - - microchip,sam9x60-i2smcc - - microchip,sama7g5-i2smcc + oneOf: + - enum: + - microchip,sam9x60-i2smcc + - microchip,sama7g5-i2smcc + - items: + - enum: + - microchip,sam9x7-i2smcc + - const: microchip,sam9x60-i2smcc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml b/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml new file mode 100644 index 00000000000000..37161d2aa96e18 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ASoC DPCM USB backend DAI + +maintainers: + - Wesley Cheng <quic_wcheng@quicinc.com> + +description: + The USB port is a supported AFE path on the Q6 DSP. This ASoC DPCM + backend DAI will communicate the required settings to initialize the + XHCI host controller properly for enabling the offloaded audio stream. + Parameters defined under this node will carry settings, which will be + passed along during the QMI stream enable request and configuration of + the XHCI host controller. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - qcom,q6usb + + iommus: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + qcom,usb-audio-intr-idx: + description: + Desired XHCI interrupter number to use. Depending on the audio DSP + on the platform, it will operate on a specific XHCI interrupter. + $ref: /schemas/types.yaml#/definitions/uint16 + maximum: 8 + +required: + - compatible + - "#sound-dai-cells" + - qcom,usb-audio-intr-idx + +additionalProperties: false + +examples: + - | + dais { + compatible = "qcom,q6usb"; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x180f 0x0>; + qcom,usb-audio-intr-idx = /bits/ 16 <2>; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index 6f419747273e37..2ab6871e89e5e0 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -107,7 +107,7 @@ patternProperties: properties: sound-dai: minItems: 1 - maxItems: 4 + maxItems: 8 required: - link-name diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml index adbfa67f88ed93..cf6c3787adfeff 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml @@ -15,6 +15,7 @@ description: | allOf: - $ref: dai-common.yaml# + - $ref: qcom,wcd93xx-common.yaml# properties: compatible: @@ -22,92 +23,12 @@ properties: - qcom,wcd9380-codec - qcom,wcd9385-codec - reset-gpios: - description: GPIO spec for reset line to use - maxItems: 1 - us-euro-gpios: description: GPIO spec for swapping gnd and mic segments maxItems: 1 - vdd-buck-supply: - description: A reference to the 1.8V buck supply - - vdd-rxtx-supply: - description: A reference to the 1.8V rx supply - - vdd-io-supply: - description: A reference to the 1.8V I/O supply - - vdd-mic-bias-supply: - description: A reference to the 3.8V mic bias supply - - qcom,tx-device: - $ref: /schemas/types.yaml#/definitions/phandle-array - description: A reference to Soundwire tx device phandle - - qcom,rx-device: - $ref: /schemas/types.yaml#/definitions/phandle-array - description: A reference to Soundwire rx device phandle - - qcom,micbias1-microvolt: - description: micbias1 voltage - minimum: 1800000 - maximum: 2850000 - - qcom,micbias2-microvolt: - description: micbias2 voltage - minimum: 1800000 - maximum: 2850000 - - qcom,micbias3-microvolt: - description: micbias3 voltage - minimum: 1800000 - maximum: 2850000 - - qcom,micbias4-microvolt: - description: micbias4 voltage - minimum: 1800000 - maximum: 2850000 - - qcom,hphl-jack-type-normally-closed: - description: Indicates that HPHL jack switch type is normally closed - type: boolean - - qcom,ground-jack-type-normally-closed: - description: Indicates that Headset Ground switch type is normally closed - type: boolean - - qcom,mbhc-headset-vthreshold-microvolt: - description: Voltage threshold value for headset detection - minimum: 0 - maximum: 2850000 - - qcom,mbhc-headphone-vthreshold-microvolt: - description: Voltage threshold value for headphone detection - minimum: 0 - maximum: 2850000 - - qcom,mbhc-buttons-vthreshold-microvolt: - description: - Array of 8 Voltage threshold values corresponding to headset - button0 - button7 - minItems: 8 - maxItems: 8 - - '#sound-dai-cells': - const: 1 - required: - compatible - - reset-gpios - - qcom,tx-device - - qcom,rx-device - - qcom,micbias1-microvolt - - qcom,micbias2-microvolt - - qcom,micbias3-microvolt - - qcom,micbias4-microvolt - - "#sound-dai-cells" unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd939x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd939x-sdw.yaml new file mode 100644 index 00000000000000..67ed7701b5d67c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd939x-sdw.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd939x-sdw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoundWire devices on WCD9390/WCD9395 + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC. + It has RX and TX Soundwire devices. This bindings is for the devices. + +properties: + compatible: + const: sdw20217010e00 + + reg: + maxItems: 1 + + qcom,tx-port-mapping: + description: | + Specifies static port mapping between device and host tx ports. + In the order of the device port index. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 + + qcom,rx-port-mapping: + description: | + Specifies static port mapping between device and host rx ports. + In the order of device port index. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 6 + maxItems: 6 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soundwire@3210000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03210000 0x2000>; + wcd938x_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5 6>; + }; + }; + + soundwire@3230000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03230000 0x2000>; + wcd938x_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 3 4 5>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml new file mode 100644 index 00000000000000..6e76f6a8634f07 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd939x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCD9380/WCD9385 Audio Codec + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC. + It has RX and TX Soundwire devices. + The WCD9390/WCD9395 IC has a functionally separate USB-C Mux subsystem + accessible over an I2C interface. + The Audio Headphone and Microphone data path between the Codec and the USB-C Mux + subsystems are external to the IC, thus requiring DT port-endpoint graph description + to handle USB-C altmode & orientation switching for Audio Accessory Mode. + +allOf: + - $ref: dai-common.yaml# + - $ref: qcom,wcd93xx-common.yaml# + +properties: + compatible: + oneOf: + - const: qcom,wcd9390-codec + - items: + - const: qcom,wcd9395-codec + - const: qcom,wcd9390-codec + + mode-switch: + description: Flag the port as possible handler of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the WCD939x Codec node to USB MUX subsystems for the + purpose of handling altmode muxing and orientation switching to detect and + enable Audio Accessory Mode. + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + codec { + compatible = "qcom,wcd9390-codec"; + reset-gpios = <&tlmm 32 IRQ_TYPE_NONE>; + #sound-dai-cells = <1>; + qcom,tx-device = <&wcd939x_tx>; + qcom,rx-device = <&wcd939x_rx>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,hphl-jack-type-normally-closed; + qcom,ground-jack-type-normally-closed; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + }; + + /* ... */ + + soundwire@3210000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03210000 0x2000>; + wcd939x_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5 6>; + }; + }; + + soundwire@3230000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03230000 0x2000>; + wcd938x_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 3 4 5>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd93xx-common.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd93xx-common.yaml new file mode 100644 index 00000000000000..f78ba148ad25ff --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd93xx-common.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd93xx-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for Qualcomm WCD93xx Audio Codec + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +properties: + reset-gpios: + description: GPIO spec for reset line to use + maxItems: 1 + + vdd-buck-supply: + description: A reference to the 1.8V buck supply + + vdd-rxtx-supply: + description: A reference to the 1.8V rx supply + + vdd-io-supply: + description: A reference to the 1.8V I/O supply + + vdd-mic-bias-supply: + description: A reference to the 3.8V mic bias supply + + qcom,tx-device: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A reference to Soundwire tx device phandle + + qcom,rx-device: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A reference to Soundwire rx device phandle + + qcom,micbias1-microvolt: + description: micbias1 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias2-microvolt: + description: micbias2 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias3-microvolt: + description: micbias3 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias4-microvolt: + description: micbias4 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,hphl-jack-type-normally-closed: + description: Indicates that HPHL jack switch type is normally closed + type: boolean + + qcom,ground-jack-type-normally-closed: + description: Indicates that Headset Ground switch type is normally closed + type: boolean + + qcom,mbhc-headset-vthreshold-microvolt: + description: Voltage threshold value for headset detection + minimum: 0 + maximum: 2850000 + + qcom,mbhc-headphone-vthreshold-microvolt: + description: Voltage threshold value for headphone detection + minimum: 0 + maximum: 2850000 + + qcom,mbhc-buttons-vthreshold-microvolt: + description: + Array of 8 Voltage threshold values corresponding to headset + button0 - button7 + minItems: 8 + maxItems: 8 + + '#sound-dai-cells': + const: 1 + +required: + - reset-gpios + - qcom,tx-device + - qcom,rx-device + - qcom,micbias1-microvolt + - qcom,micbias2-microvolt + - qcom,micbias3-microvolt + - qcom,micbias4-microvolt + - "#sound-dai-cells" + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml index d717017b0fdbc6..22798d22d981b2 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml @@ -28,6 +28,10 @@ properties: description: Powerdown/Shutdown line to use (pin SD_N) maxItems: 1 + reset-gpios: + description: Powerdown/Shutdown line to use (pin SD_N) + maxItems: 1 + '#sound-dai-cells': const: 0 @@ -37,11 +41,16 @@ properties: required: - compatible - reg - - powerdown-gpios - '#sound-dai-cells' - vdd-1p8-supply - vdd-io-supply +oneOf: + - required: + - powerdown-gpios + - required: + - reset-gpios + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015.yaml new file mode 100644 index 00000000000000..880196081a6046 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,rt1015.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt1015.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RT1015 Mono Class D Audio Amplifier + +maintainers: + - Jack Yu <jack.yu@realtek.com> + +properties: + compatible: + enum: + - realtek,rt1015 + + reg: + maxItems: 1 + + realtek,power-up-delay-ms: + description: Set a delay time for flush work to be completed, + this vlaue is adjustable depending on platform. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@28 { + compatible = "realtek,rt1015"; + reg = <0x28>; + realtek,power-up-delay-ms = <50>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/rt1015.txt b/Documentation/devicetree/bindings/sound/rt1015.txt deleted file mode 100644 index e498966d436fbb..00000000000000 --- a/Documentation/devicetree/bindings/sound/rt1015.txt +++ /dev/null @@ -1,23 +0,0 @@ -RT1015 Mono Class D Audio Amplifier - -This device supports I2C only. - -Required properties: - -- compatible : "realtek,rt1015". - -- reg : The I2C address of the device. - -Optional properties: - -- realtek,power-up-delay-ms - Set a delay time for flush work to be completed, - this value is adjustable depending on platform. - -Example: - -rt1015: codec@28 { - compatible = "realtek,rt1015"; - reg = <0x28>; - realtek,power-up-delay-ms = <50>; -}; diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml index 76059259914346..cbc7ba37362a93 100644 --- a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml @@ -25,8 +25,11 @@ properties: description: Phandles to the codecs. $ref: /schemas/types.yaml#/definitions/phandle-array items: - - description: Phandle to the WM5110 audio codec. - - description: Phandle to the HDMI transmitter node. + - items: + - description: Phandle to the WM5110 audio codec. + - items: + - description: Phandle to the HDMI transmitter node. + samsung,audio-routing: description: | diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml index 58367587bfbc26..32e7c14033c2cc 100644 --- a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml +++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml @@ -22,7 +22,6 @@ properties: - const: atmel,at91rm9200-spi - items: - const: microchip,sam9x7-spi - - const: microchip,sam9x60-spi - const: atmel,at91rm9200-spi reg: diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml index 79da99ca0e53e6..f681372da81fbd 100644 --- a/Documentation/devicetree/bindings/spi/samsung,spi.yaml +++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml @@ -17,11 +17,13 @@ properties: compatible: oneOf: - enum: + - google,gs101-spi - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450 - samsung,s3c6410-spi - samsung,s5pv210-spi # for S5PV210 and S5PC110 - samsung,exynos4210-spi - samsung,exynos5433-spi + - samsung,exynos850-spi - samsung,exynosautov9-spi - tesla,fsd-spi - const: samsung,exynos7-spi @@ -74,8 +76,6 @@ required: - compatible - clocks - clock-names - - dmas - - dma-names - interrupts - reg diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 524f6fe8c27b45..093150c0cb8740 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -69,6 +69,21 @@ properties: Should be generally avoided and be replaced by spi-cs-high + ACTIVE_HIGH. + fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Size of the RX and TX data FIFOs in bytes. + + rx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Size of the RX data FIFO in bytes. + + tx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Size of the TX data FIFO in bytes. + num-cs: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -116,6 +131,10 @@ patternProperties: - compatible - reg +dependencies: + rx-fifo-depth: [ tx-fifo-depth ] + tx-fifo-depth: [ rx-fifo-depth ] + allOf: - if: not: @@ -129,6 +148,14 @@ allOf: properties: "#address-cells": const: 0 + - not: + required: + - fifo-depth + - rx-fifo-depth + - not: + required: + - fifo-depth + - tx-fifo-depth additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index 727c5346b8ceda..2ff17424479570 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -22,6 +22,7 @@ properties: - enum: - fsl,imx8ulp-spi - fsl,imx93-spi + - fsl,imx95-spi - const: fsl,imx7ulp-spi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml index 7fd59114548001..4a5f41bde00f3c 100644 --- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml @@ -15,12 +15,18 @@ allOf: properties: compatible: - enum: - - nxp,imx8dxl-fspi - - nxp,imx8mm-fspi - - nxp,imx8mp-fspi - - nxp,imx8qxp-fspi - - nxp,lx2160a-fspi + oneOf: + - enum: + - nxp,imx8dxl-fspi + - nxp,imx8mm-fspi + - nxp,imx8mp-fspi + - nxp,imx8qxp-fspi + - nxp,lx2160a-fspi + - items: + - enum: + - nxp,imx93-fspi + - nxp,imx95-fspi + - const: nxp,imx8mm-fspi reg: items: diff --git a/Documentation/devicetree/bindings/submitting-patches.rst b/Documentation/devicetree/bindings/submitting-patches.rst index 36a17b250ccc75..a64f21a5f299a6 100644 --- a/Documentation/devicetree/bindings/submitting-patches.rst +++ b/Documentation/devicetree/bindings/submitting-patches.rst @@ -15,6 +15,11 @@ I. For patch submitters "dt-bindings: <binding dir>: ..." + Few subsystems, like ASoC, media, regulators and SPI, expect reverse order + of the prefixes:: + + "<binding dir>: dt-bindings: ..." + The 80 characters of the subject are precious. It is recommended to not use "Documentation" or "doc" because that is implied. All bindings are docs. Repeating "binding" again should also be avoided. @@ -42,28 +47,18 @@ I. For patch submitters the code implementing the binding. 6) Any compatible strings used in a chip or board DTS file must be - previously documented in the corresponding DT binding text file + previously documented in the corresponding DT binding file in Documentation/devicetree/bindings. This rule applies even if the Linux device driver does not yet match on the compatible string. [ checkpatch will emit warnings if this step is not followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864 ("checkpatch: add DT compatible string documentation checks"). ] - 7) The wildcard "<chip>" may be used in compatible strings, as in - the following example: - - - compatible: Must contain '"nvidia,<chip>-pcie", - "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ... - - As in the above example, the known values of "<chip>" should be - documented if it is used. - - 8) If a documented compatible string is not yet matched by the + 7) If a documented compatible string is not yet matched by the driver, the documentation should also include a compatible - string that is matched by the driver (as in the "nvidia,tegra20-pcie" - example above). + string that is matched by the driver. - 9) Bindings are actively used by multiple projects other than the Linux + 8) Bindings are actively used by multiple projects other than the Linux Kernel, extra care and consideration may need to be taken when making changes to existing bindings. diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml index 9b2272a9ec15d8..6b3aea6d73b077 100644 --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -21,6 +21,7 @@ properties: - allwinner,sun50i-a100-ths - allwinner,sun50i-h5-ths - allwinner,sun50i-h6-ths + - allwinner,sun50i-h616-ths clocks: minItems: 1 @@ -50,6 +51,10 @@ properties: nvmem-cell-names: const: calibration + allwinner,sram: + maxItems: 1 + description: phandle to device controlling temperate offset SYS_CFG register + # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details "#thermal-sensor-cells": enum: @@ -65,6 +70,7 @@ allOf: - allwinner,sun20i-d1-ths - allwinner,sun50i-a100-ths - allwinner,sun50i-h6-ths + - allwinner,sun50i-h616-ths then: properties: @@ -83,6 +89,17 @@ allOf: minItems: 2 - if: + not: + properties: + compatible: + contains: + const: allwinner,sun50i-h616-ths + + then: + properties: + allwinner,sram: false + + - if: properties: compatible: contains: @@ -101,17 +118,12 @@ allOf: const: 1 - if: - properties: - compatible: - contains: - enum: - - allwinner,sun8i-h3-ths - - allwinner,sun8i-r40-ths - - allwinner,sun20i-d1-ths - - allwinner,sun50i-a64-ths - - allwinner,sun50i-a100-ths - - allwinner,sun50i-h5-ths - - allwinner,sun50i-h6-ths + not: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-ths then: required: diff --git a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt deleted file mode 100644 index e241bb5a5584d2..00000000000000 --- a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Dialog DA9062/61 TJUNC Thermal Module - -This module is part of the DA9061/DA9062. For more details about entire -DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt - -Junction temperature thermal module uses an interrupt signal to identify -high THERMAL_TRIP_HOT temperatures for the PMIC device. - -Required properties: - -- compatible: should be one of the following valid compatible string lines: - "dlg,da9061-thermal", "dlg,da9062-thermal" - "dlg,da9062-thermal" - -Optional properties: - -- polling-delay-passive : Specify the polling period, measured in - milliseconds, between thermal zone device update checks. - -Example: DA9062 - - pmic0: da9062@58 { - thermal { - compatible = "dlg,da9062-thermal"; - polling-delay-passive = <3000>; - }; - }; - -Example: DA9061 using a fall-back compatible for the DA9062 onkey driver - - pmic0: da9061@58 { - thermal { - compatible = "dlg,da9061-thermal", "dlg,da9062-thermal"; - polling-delay-passive = <3000>; - }; - }; diff --git a/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml new file mode 100644 index 00000000000000..e8b2cac41084f4 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/dlg,da9062-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9062/61 TJUNC Thermal Module + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This module is part of the DA9061/DA9062. For more details about entire + DA906{1,2} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml + + Junction temperature thermal module uses an interrupt signal to identify + high THERMAL_TRIP_HOT temperatures for the PMIC device. + +properties: + compatible: + oneOf: + - const: dlg,da9062-thermal + - items: + - const: dlg,da9061-thermal + - const: dlg,da9062-thermal + + polling-delay-passive: + description: + Specify the polling period, measured in milliseconds, between + thermal zone device update checks. + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml index 145744027234bf..d155d6799da6fc 100644 --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml @@ -33,7 +33,8 @@ properties: description: | The values to be programmed into TTRnCR, as specified by the SoC reference manual. The first cell is TTR0CR, the second is TTR1CR, etc. - maxItems: 4 + minItems: 2 + maxItems: 7 fsl,tmu-calibration: $ref: /schemas/types.yaml#/definitions/uint32-matrix diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index ecf276fd155cfb..6a81cb6e11bc1e 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -29,6 +29,7 @@ properties: - renesas,r8a779a0-thermal # R-Car V3U - renesas,r8a779f0-thermal # R-Car S4-8 - renesas,r8a779g0-thermal # R-Car V4H + - renesas,r8a779h0-thermal # R-Car V4M reg: true @@ -90,6 +91,7 @@ else: enum: - renesas,r8a779f0-thermal - renesas,r8a779g0-thermal + - renesas,r8a779h0-thermal then: required: - interrupts diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index dbd52620d29306..68398e7e865565 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -228,8 +228,6 @@ patternProperties: additionalProperties: false required: - - polling-delay - - polling-delay-passive - thermal-sensors - trips diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt deleted file mode 100644 index b3e797e8aa3133..00000000000000 --- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ /dev/null @@ -1,48 +0,0 @@ -MediaTek Timers ---------------- - -MediaTek SoCs have different timers on different platforms, -- CPUX (ARM/ARM64 System Timer) -- GPT (General Purpose Timer) -- SYST (System Timer) - -The proper timer will be selected automatically by driver. - -Required properties: -- compatible should contain: - For those SoCs that use GPT - * "mediatek,mt2701-timer" for MT2701 compatible timers (GPT) - * "mediatek,mt6580-timer" for MT6580 compatible timers (GPT) - * "mediatek,mt6582-timer" for MT6582 compatible timers (GPT) - * "mediatek,mt6589-timer" for MT6589 compatible timers (GPT) - * "mediatek,mt7623-timer" for MT7623 compatible timers (GPT) - * "mediatek,mt8127-timer" for MT8127 compatible timers (GPT) - * "mediatek,mt8135-timer" for MT8135 compatible timers (GPT) - * "mediatek,mt8173-timer" for MT8173 compatible timers (GPT) - * "mediatek,mt8516-timer" for MT8516 compatible timers (GPT) - * "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT) - - For those SoCs that use SYST - * "mediatek,mt8183-timer" for MT8183 compatible timers (SYST) - * "mediatek,mt8186-timer" for MT8186 compatible timers (SYST) - * "mediatek,mt8188-timer" for MT8188 compatible timers (SYST) - * "mediatek,mt8192-timer" for MT8192 compatible timers (SYST) - * "mediatek,mt8195-timer" for MT8195 compatible timers (SYST) - * "mediatek,mt7629-timer" for MT7629 compatible timers (SYST) - * "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST) - - For those SoCs that use CPUX - * "mediatek,mt6795-systimer" for MT6795 compatible timers (CPUX) - * "mediatek,mt8365-systimer" for MT8365 compatible timers (CPUX) - -- reg: Should contain location and length for timer register. -- clocks: Should contain system clock. - -Examples: - - timer@10008000 { - compatible = "mediatek,mt6577-timer"; - reg = <0x10008000 0x80>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>; - clocks = <&system_clk>; - }; diff --git a/Documentation/devicetree/bindings/timer/mediatek,timer.yaml b/Documentation/devicetree/bindings/timer/mediatek,timer.yaml new file mode 100644 index 00000000000000..f68fc7050c5687 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/mediatek,timer.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/mediatek,timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek SoC timers + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +description: + MediaTek SoCs have different timers on different platforms, + CPUX (ARM/ARM64 System Timer), GPT (General Purpose Timer) + and SYST (System Timer). + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt6577-timer + - mediatek,mt6765-timer + - mediatek,mt6795-systimer + # GPT Timers + - items: + - enum: + - mediatek,mt2701-timer + - mediatek,mt6580-timer + - mediatek,mt6582-timer + - mediatek,mt6589-timer + - mediatek,mt7623-timer + - mediatek,mt8127-timer + - mediatek,mt8135-timer + - mediatek,mt8173-timer + - mediatek,mt8516-timer + - const: mediatek,mt6577-timer + # SYST Timers + - items: + - enum: + - mediatek,mt7629-timer + - mediatek,mt8183-timer + - mediatek,mt8186-timer + - mediatek,mt8188-timer + - mediatek,mt8192-timer + - mediatek,mt8195-timer + - mediatek,mt8365-systimer + - const: mediatek,mt6765-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: Timer clock + - description: RTC or bus clock + + clock-names: + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + timer@10008000 { + compatible = "mediatek,mt6577-timer"; + reg = <0x10008000 0x80>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>; + clocks = <&system_clk>; + }; diff --git a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml index 1ee4aab695d384..fe6bc4173789da 100644 --- a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml +++ b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml @@ -9,7 +9,7 @@ title: Marvell MMP Timer maintainers: - Daniel Lezcano <daniel.lezcano@linaro.org> - Thomas Gleixner <tglx@linutronix.de> - - Rob Herring <robh+dt@kernel.org> + - Rob Herring <robh@kernel.org> properties: $nodename: diff --git a/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml b/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml index c3413b47ac3df9..6cb2de7cb5688e 100644 --- a/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml +++ b/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml @@ -20,6 +20,7 @@ properties: compatible: items: - enum: + - atmel,attpm20p - infineon,slb9670 - st,st33htpm-spi - st,st33zp24-spi diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 79dcd92c4a4345..e07be7bf8395f7 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -28,6 +28,7 @@ properties: compatible: items: + # Entries are sorted alphanumerically by the compatible - enum: # Acbel fsg032 power supply - acbel,fsg032 @@ -47,14 +48,16 @@ properties: - adi,lt7182s # AMS iAQ-Core VOC Sensor - ams,iaq-core + # Temperature monitoring of Astera Labs PT5161L PCIe retimer + - asteralabs,pt5161l # i2c serial eeprom (24cxx) - at,24c08 + # i2c h/w elliptic curve crypto module + - atmel,atecc508a # ATSHA204 - i2c h/w symmetric crypto module - atmel,atsha204 # ATSHA204A - i2c h/w symmetric crypto module - atmel,atsha204a - # i2c h/w elliptic curve crypto module - - atmel,atecc508a # BPA-RS600: Power Supply - blutek,bpa-rs600 # Bosch Sensortec pressure, temperature, humididty and VOC sensor @@ -115,20 +118,6 @@ properties: - fsl,mpl3115 # MPR121: Proximity Capacitive Touch Sensor Controller - fsl,mpr121 - # Monolithic Power Systems Inc. multi-phase controller mp2856 - - mps,mp2856 - # Monolithic Power Systems Inc. multi-phase controller mp2857 - - mps,mp2857 - # Monolithic Power Systems Inc. multi-phase controller mp2888 - - mps,mp2888 - # Monolithic Power Systems Inc. multi-phase controller mp2971 - - mps,mp2971 - # Monolithic Power Systems Inc. multi-phase controller mp2973 - - mps,mp2973 - # Monolithic Power Systems Inc. multi-phase controller mp2975 - - mps,mp2975 - # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990 - - mps,mp5990 # Honeywell Humidicon HIH-6130 humidity/temperature sensor - honeywell,hi6130 # IBM Common Form Factor Power Supply Versions (all versions) @@ -137,16 +126,10 @@ properties: - ibm,cffps1 # IBM Common Form Factor Power Supply Versions 2 - ibm,cffps2 + # Infineon barometric pressure and temperature sensor + - infineon,dps310 # Infineon IR36021 digital POL buck controller - infineon,ir36021 - # Infineon IR38060 Voltage Regulator - - infineon,ir38060 - # Infineon IR38064 Voltage Regulator - - infineon,ir38064 - # Infineon IR38164 Voltage Regulator - - infineon,ir38164 - # Infineon IR38263 Voltage Regulator - - infineon,ir38263 # Infineon IRPS5401 Voltage Regulator (PMIC) - infineon,irps5401 # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor @@ -195,6 +178,8 @@ properties: - maxim,max1237 # Temperature Sensor, I2C interface - maxim,max1619 + # 3-Channel Remote Temperature Sensor + - maxim,max31730 # 10-bit 10 kOhm linear programmable voltage divider - maxim,max5481 # 10-bit 50 kOhm linear programmable voltage divider @@ -207,8 +192,6 @@ properties: - maxim,max6621 # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface - maxim,max6625 - # 3-Channel Remote Temperature Sensor - - maxim,max31730 # mCube 3-axis 8-bit digital accelerometer - mcube,mc3230 # Measurement Specialities I2C temperature and humidity sensor @@ -239,8 +222,6 @@ properties: - memsic,mxc6655 # Menlo on-board CPLD trivial SPI device - menlo,m53cpld - # Micron SPI NOR Authenta - - micron,spi-authenta # Microchip differential I2C ADC, 1 Channel, 18 bit - microchip,mcp3421 # Microchip differential I2C ADC, 2 Channel, 18 bit @@ -257,40 +238,58 @@ properties: - microchip,mcp3427 # Microchip differential I2C ADC, 4 Channel, 16 bit - microchip,mcp3428 - # Microchip 7-bit Single I2C Digital POT (5k) - - microchip,mcp4017-502 # Microchip 7-bit Single I2C Digital POT (10k) - microchip,mcp4017-103 - # Microchip 7-bit Single I2C Digital POT (50k) - - microchip,mcp4017-503 # Microchip 7-bit Single I2C Digital POT (100k) - microchip,mcp4017-104 # Microchip 7-bit Single I2C Digital POT (5k) - - microchip,mcp4018-502 + - microchip,mcp4017-502 + # Microchip 7-bit Single I2C Digital POT (50k) + - microchip,mcp4017-503 # Microchip 7-bit Single I2C Digital POT (10k) - microchip,mcp4018-103 - # Microchip 7-bit Single I2C Digital POT (50k) - - microchip,mcp4018-503 # Microchip 7-bit Single I2C Digital POT (100k) - microchip,mcp4018-104 # Microchip 7-bit Single I2C Digital POT (5k) - - microchip,mcp4019-502 + - microchip,mcp4018-502 + # Microchip 7-bit Single I2C Digital POT (50k) + - microchip,mcp4018-503 # Microchip 7-bit Single I2C Digital POT (10k) - microchip,mcp4019-103 - # Microchip 7-bit Single I2C Digital POT (50k) - - microchip,mcp4019-503 # Microchip 7-bit Single I2C Digital POT (100k) - microchip,mcp4019-104 + # Microchip 7-bit Single I2C Digital POT (5k) + - microchip,mcp4019-502 + # Microchip 7-bit Single I2C Digital POT (50k) + - microchip,mcp4019-503 # PWM Fan Speed Controller With Fan Fault Detection - microchip,tc654 # PWM Fan Speed Controller With Fan Fault Detection - microchip,tc655 + # Micron SPI NOR Authenta + - micron,spi-authenta # MiraMEMS DA226 2-axis 14-bit digital accelerometer - miramems,da226 # MiraMEMS DA280 3-axis 14-bit digital accelerometer - miramems,da280 # MiraMEMS DA311 3-axis 12-bit digital accelerometer - miramems,da311 + # Monolithic Power Systems Inc. multi-phase controller mp2856 + - mps,mp2856 + # Monolithic Power Systems Inc. multi-phase controller mp2857 + - mps,mp2857 + # Monolithic Power Systems Inc. multi-phase controller mp2888 + - mps,mp2888 + # Monolithic Power Systems Inc. multi-phase controller mp2971 + - mps,mp2971 + # Monolithic Power Systems Inc. multi-phase controller mp2973 + - mps,mp2973 + # Monolithic Power Systems Inc. multi-phase controller mp2975 + - mps,mp2975 + # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990 + - mps,mp5990 + # Monolithic Power Systems Inc. synchronous step-down converter mpq8785 + - mps,mpq8785 # Temperature sensor with integrated fan control - national,lm63 # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor @@ -321,12 +320,12 @@ properties: - samsung,exynos-sataphy-i2c # Semtech sx1301 baseband processor - semtech,sx1301 - # Sensirion low power multi-pixel gas sensor with I2C interface - - sensirion,sgpc3 # Sensirion multi-pixel gas sensor with I2C interface - sensirion,sgp30 # Sensirion gas sensor with I2C interface - sensirion,sgp40 + # Sensirion low power multi-pixel gas sensor with I2C interface + - sensirion,sgpc3 # Sensirion temperature & humidity sensor with I2C interface - sensirion,sht4x # Sensortek 3 axis accelerometer @@ -372,8 +371,6 @@ properties: - ti,lm74 # Temperature sensor with integrated fan control - ti,lm96000 - # I2C Touch-Screen Controller - - ti,tsc2003 # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface - ti,tmp103 # Thermometer with SPI interface @@ -395,10 +392,12 @@ properties: - ti,tps544b25 - ti,tps544c20 - ti,tps544c25 - # Winbond/Nuvoton H/W Monitor - - winbond,w83793 + # I2C Touch-Screen Controller + - ti,tsc2003 # Vicor Corporation Digital Supervisor - vicor,pli1209bc + # Winbond/Nuvoton H/W Monitor + - winbond,w83793 required: - compatible diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml index e4d893369d57bf..3f5857aee3b0e9 100644 --- a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml +++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml @@ -23,24 +23,11 @@ properties: connector: type: object $ref: ../connector/usb-connector.yaml - unevaluatedProperties: false - - description: - Properties for usb c connector. properties: compatible: const: usb-c-connector - power-role: true - - data-role: true - - try-power-role: true - - required: - - compatible - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index b7e664f7395b33..3b56e0edb1c676 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -313,7 +313,7 @@ properties: usb-phy: description: phandle for the PHY device. Use "phys" instead. - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 deprecated: true fsl,usbphy: diff --git a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml index 47add0d85fb891..28096619a88271 100644 --- a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml +++ b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/cypress,hx3.yaml# diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml index f9410eb76a621a..8b25b9a01ced35 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml @@ -27,13 +27,8 @@ properties: vcc-supply: description: power supply (2.7V-5.5V) - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true port: $ref: /schemas/graph.yaml#/$defs/port-base @@ -79,6 +74,9 @@ required: - reg - port +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 87986c45be88ef..2ed178f16a7822 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -77,6 +77,7 @@ properties: - const: usb-ehci - enum: - generic-ehci + - marvell,ac5-ehci - marvell,armada-3700-ehci - marvell,orion-ehci - nuvoton,npcm750-ehci diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index d3b2b666ec2a4c..88e1607cf053ac 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -33,13 +33,8 @@ properties: vcc-supply: description: power supply - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true port: $ref: /schemas/graph.yaml#/properties/port @@ -54,6 +49,9 @@ required: - orientation-switch - port +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml b/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml new file mode 100644 index 00000000000000..f3011694393d82 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/hisilicon,hi3798mv200-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon Hi3798MV200 DWC3 USB SoC controller + +maintainers: + - Yang Xiwen <forbidden405@foxmail.com> + +properties: + compatible: + const: hisilicon,hi3798mv200-dwc3 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + + clocks: + items: + - description: Controller bus clock + - description: Controller suspend clock + - description: Controller reference clock + - description: Controller gm clock + - description: Controller gs clock + - description: Controller utmi clock + - description: Controller pipe clock + + clock-names: + items: + - const: bus + - const: suspend + - const: ref + - const: gm + - const: gs + - const: utmi + - const: pipe + + resets: + maxItems: 1 + + reset-names: + const: soft + +patternProperties: + '^usb@[0-9a-f]+$': + $ref: snps,dwc3.yaml# + +required: + - compatible + - ranges + - '#address-cells' + - '#size-cells' + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb { + compatible = "hisilicon,hi3798mv200-dwc3"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clk_bus>, + <&clk_suspend>, + <&clk_ref>, + <&clk_gm>, + <&clk_gs>, + <&clk_utmi>, + <&clk_pipe>; + clock-names = "bus", "suspend", "ref", "gm", "gs", "utmi", "pipe"; + resets = <&crg 0xb0 12>; + reset-names = "soft"; + + usb@98a0000 { + compatible = "snps,dwc3"; + reg = <0x98a0000 0x10000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, + <&clk_suspend>, + <&clk_ref>; + clock-names = "bus_early", "suspend", "ref"; + phys = <&usb2_phy1_port2>, <&combphy0 0>; + phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; + dr_mode = "host"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/ite,it5205.yaml b/Documentation/devicetree/bindings/usb/ite,it5205.yaml new file mode 100644 index 00000000000000..36ec4251b5f208 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ite,it5205.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ite,it5205.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE IT5202 Type-C USB Alternate Mode Passive MUX + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + - Tianping Fang <tianping.fang@mediatek.com> + +properties: + compatible: + const: ite,it5205 + + reg: + maxItems: 1 + + vcc-supply: + description: Power supply for VCC pin (3.3V) + + mode-switch: + description: Flag the port as possible handle of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ite,ovp-enable: + description: Enable Over Voltage Protection functionality + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the IT5205 to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + - orientation-switch + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@48 { + compatible = "ite,it5205"; + reg = <0x48>; + + mode-switch; + orientation-switch; + + vcc-supply = <&mt6359_vibr_ldo_reg>; + + port { + it5205_usbss_sbu: endpoint { + remote-endpoint = <&typec_controller>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml index a59d91243ac836..d4e187c78a0b52 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml @@ -185,7 +185,10 @@ properties: 2 - used by mt2712 etc, revision 2 with following IPM rule; 101 - used by mt8183, specific 1.01; 102 - used by mt8192, specific 1.02; - enum: [1, 2, 101, 102] + 103 - used by mt8195, IP0, specific 1.03; + 105 - used by mt8195, IP2, specific 1.05; + 106 - used by mt8195, IP3, specific 1.06; + enum: [1, 2, 101, 102, 103, 105, 106] mediatek,u3p-dis-msk: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml index 445183d9d6db1a..e2a72deae77601 100644 --- a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml @@ -72,8 +72,6 @@ allOf: i2c-bus: false else: $ref: /schemas/usb/usb-device.yaml - required: - - peer-hub additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml index eee548ac1abea3..d805dde80796f3 100644 --- a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml +++ b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml @@ -20,13 +20,8 @@ properties: vdd18-supply: description: Power supply for VDD18 pin - retimer-switch: - description: Flag the port as possible handle of SuperSpeed signals retiming - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + orientation-switch: true + retimer-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -49,6 +44,9 @@ required: - compatible - reg +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml index eaedb4cc6b6cce..65a8632b4d9ed8 100644 --- a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml +++ b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: nxp,ptn5110 + items: + - const: nxp,ptn5110 + - const: tcpci reg: maxItems: 1 @@ -41,7 +43,7 @@ examples: #size-cells = <0>; tcpci@50 { - compatible = "nxp,ptn5110"; + compatible = "nxp,ptn5110", "tcpci"; reg = <0x50>; interrupt-parent = <&gpio3>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; diff --git a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml index c0201da002f629..589914d22bf250 100644 --- a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml +++ b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml @@ -21,14 +21,8 @@ properties: description: power supply (1.8V) enable-gpios: true - - retimer-switch: - description: Flag the port as possible handle of SuperSpeed signals retiming - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + orientation-switch: true + retimer-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -95,6 +89,9 @@ required: - compatible - reg +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 63d150b216c528..38a3404ec71bbb 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -102,7 +102,7 @@ properties: description: | Different types of interrupts are used based on HS PHY used on target: - pwr_event: Used for wakeup based on other power events. - - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is + - hs_phy_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is hs_phy_irq which is not triggered by default and its functionality is mutually exclusive to that of {dp/dm}_hs_phy_irq and qusb2_phy_irq. diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml index 55df3129a0bc73..d9694570c419e8 100644 --- a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml @@ -14,8 +14,19 @@ description: properties: compatible: - enum: - - qcom,pm8150b-typec + oneOf: + - enum: + - qcom,pmi632-typec + - qcom,pm8150b-typec + - items: + - enum: + - qcom,pm6150-typec + - const: qcom,pm8150b-typec + - items: + - enum: + - qcom,pm4125-typec + - const: qcom,pmi632-typec + connector: type: object @@ -24,9 +35,11 @@ properties: reg: description: Type-C port and pdphy SPMI register base offsets + minItems: 1 maxItems: 2 interrupts: + minItems: 8 items: - description: Type-C CC attach notification, VBUS error, tCCDebounce done - description: Type-C VCONN powered @@ -46,6 +59,7 @@ properties: - description: Power Domain Fast Role Swap event interrupt-names: + minItems: 8 items: - const: or-rid-detect-change - const: vpd-detect @@ -81,7 +95,33 @@ required: - interrupts - interrupt-names - vdd-vbus-supply - - vdd-pdphy-supply + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pmi632-typec + then: + properties: + reg: + maxItems: 1 + interrupts: + maxItems: 8 + interrupt-names: + maxItems: 8 + vdd-pdphy-supply: false + else: + properties: + reg: + maxItems: 2 + interrupts: + minItems: 16 + interrupt-names: + maxItems: 16 + required: + - vdd-pdphy-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml index 7ddfd3313a1858..96346723f3e9c9 100644 --- a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml @@ -35,13 +35,8 @@ properties: vdd-supply: description: USBSS VDD power supply - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -63,6 +58,9 @@ required: - reg - ports +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml index f0784d2e86dae0..0874fc21f66fbb 100644 --- a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml +++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml @@ -21,6 +21,12 @@ properties: reg: true + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + vdd-supply: description: phandle to the regulator that provides power to the hub. @@ -30,6 +36,36 @@ properties: description: phandle to the peer hub on the controller. + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + 1st downstream facing USB port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + 2nd downstream facing USB port + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + 3rd downstream facing USB port + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + 4th downstream facing USB port + +patternProperties: + '^.*@[1-4]$': + description: The hard wired USB devices + type: object + $ref: /schemas/usb/usb-device.yaml + required: - peer-hub - compatible @@ -50,6 +86,13 @@ examples: reg = <1>; vdd-supply = <&pp3300_hub>; peer-hub = <&hub_3_0>; + #address-cells = <1>; + #size-cells = <0>; + /* USB 2.0 device on port 2 */ + device@2 { + compatible = "usb123,4567"; + reg = <2>; + }; }; /* 3.0 hub on port 2 */ @@ -58,5 +101,17 @@ examples: reg = <2>; vdd-supply = <&pp3300_hub>; peer-hub = <&hub_2_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + /* Type-A connector on port 4 */ + port@4 { + reg = <4>; + endpoint { + remote-endpoint = <&usb_a0_ss>; + }; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml index fec5651f560296..f6e6d084d1c5a7 100644 --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml @@ -14,7 +14,10 @@ properties: const: ti,am62-usb reg: - maxItems: 1 + minItems: 1 + items: + - description: USB CFG register space + - description: USB PHY2 register space ranges: true @@ -82,7 +85,8 @@ examples: usbss1: usb@f910000 { compatible = "ti,am62-usb"; - reg = <0x00 0x0f910000 0x00 0x800>; + reg = <0x00 0x0f910000 0x00 0x800>, + <0x00 0x0f918000 0x00 0x400>; clocks = <&k3_clks 162 3>; clock-names = "ref"; ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>; diff --git a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml new file mode 100644 index 00000000000000..8ef117793e1132 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI USB8020B USB 3.0 hub controller + +maintainers: + - Macpaul Lin <macpaul.lin@mediatek.com> + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + enum: + - usb451,8025 + - usb451,8027 + + reg: true + + reset-gpios: + items: + - description: GPIO specifier for GRST# pin. + + vdd-supply: + description: + VDD power supply to the hub + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + +required: + - compatible + - reg + - peer-hub + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb451,8027"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb451,8025"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml index 6734f4d3aa789f..9b3ea23654af6e 100644 --- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml @@ -37,10 +37,11 @@ properties: description: Should specify the GPIO detecting a VBus insertion maxItems: 1 - vbus-regulator: - description: Should specify the regulator supplying current drawn from - the VBus line. - $ref: /schemas/types.yaml#/definitions/phandle + vbus-supply: + description: regulator supplying VBUS. It will be enabled and disabled + dynamically in OTG mode. If the regulator is controlled by a + GPIO line, this should be modeled as a regulator-fixed and + referenced by this supply. wakeup-source: description: @@ -65,7 +66,7 @@ examples: vcc-supply = <&hsusb1_vcc_regulator>; reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; - vbus-regulator = <&vbus_regulator>; + vbus-supply = <&vbus_regulator>; #phy-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/usb/usb-switch.yaml b/Documentation/devicetree/bindings/usb/usb-switch.yaml new file mode 100644 index 00000000000000..da76118e73a53c --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-switch.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB Orientation and Mode Switches Common Properties + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +description: + Common properties for devices handling USB mode and orientation switching. + +properties: + mode-switch: + description: Possible handler of altmode switching + type: boolean + + orientation-switch: + description: Possible handler of orientation switching + type: boolean + + retimer-switch: + description: Possible handler of SuperSpeed signals retiming + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the device to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Super Speed (SS) Input endpoint from the Super-Speed PHY + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + maximum: 8 + +oneOf: + - required: + - port + - required: + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml index 326b14f05d1c41..1761b7aa92f052 100644 --- a/Documentation/devicetree/bindings/usb/usb.yaml +++ b/Documentation/devicetree/bindings/usb/usb.yaml @@ -25,6 +25,8 @@ properties: usb-phy: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: List of all the USB PHYs on this HCD to be accepted by the legacy USB Physical Layer subsystem. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index d371eb57216453..b97d298b3eb695 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -63,6 +63,8 @@ patternProperties: description: Analog Devices, Inc. "^adieng,.*": description: ADI Engineering, Inc. + "^admatec,.*": + description: admatec GmbH "^advantech,.*": description: Advantech Corporation "^aeroflexgaisler,.*": @@ -109,6 +111,8 @@ patternProperties: description: Amlogic, Inc. "^ampere,.*": description: Ampere Computing LLC + "^amphenol,.*": + description: Amphenol Advanced Sensors "^ampire,.*": description: Ampire Co., Ltd. "^ams,.*": @@ -161,6 +165,8 @@ patternProperties: description: ASPEED Technology Inc. "^asrock,.*": description: ASRock Inc. + "^asteralabs,.*": + description: Astera Labs, Inc. "^asus,.*": description: AsusTek Computer Inc. "^atheros,.*": @@ -232,6 +238,8 @@ patternProperties: description: ByteDance Ltd. "^calamp,.*": description: CalAmp Corp. + "^calao,.*": + description: CALAO Systems SAS "^calaosystems,.*": description: CALAO Systems SAS "^calxeda,.*": @@ -480,6 +488,9 @@ patternProperties: description: EZchip Semiconductor "^facebook,.*": description: Facebook + "^fairchild,.*": + description: Fairchild Semiconductor (deprecated, use 'onnn') + deprecated: true "^fairphone,.*": description: Fairphone B.V. "^faraday,.*": @@ -546,6 +557,8 @@ patternProperties: description: Giantec Semiconductor, Inc. "^giantplus,.*": description: Giantplus Technology Co., Ltd. + "^glinet,.*": + description: GL Intelligence, Inc. "^globalscale,.*": description: Globalscale Technologies, Inc. "^globaltop,.*": @@ -605,6 +618,8 @@ patternProperties: description: Honestar Technologies Co., Ltd. "^honeywell,.*": description: Honeywell + "^hoperf,.*": + description: Shenzhen Hope Microelectronics Co., Ltd. "^hoperun,.*": description: Jiangsu HopeRun Software Co., Ltd. "^hp,.*": @@ -635,12 +650,16 @@ patternProperties: description: Hyundai Technology "^i2se,.*": description: I2SE GmbH + "^IBM,.*": + description: International Business Machines (IBM) "^ibm,.*": description: International Business Machines (IBM) "^icplus,.*": description: IC Plus Corp. "^idt,.*": description: Integrated Device Technologies, Inc. + "^iei,.*": + description: IEI Integration Corp. "^ifi,.*": description: Ingenieurburo Fur Ic-Technologie (I/F/I) "^ilitek,.*": @@ -827,6 +846,8 @@ patternProperties: description: LSI Corp. (LSI Logic) "^lunzn,.*": description: Shenzhen Lunzn Technology Co., Ltd. + "^luxul,.*": + description: Lagrand | AV "^lwn,.*": description: Liebherr-Werk Nenzing GmbH "^lxa,.*": @@ -905,6 +926,9 @@ patternProperties: description: Miniand Tech "^minix,.*": description: MINIX Technology Ltd. + "^mips,.*": + description: MIPS Technology (deprecated, use 'mti' or 'img') + deprecated: true "^miramems,.*": description: MiraMEMS Sensing Technology Co., Ltd. "^mitsubishi,.*": @@ -917,6 +941,8 @@ patternProperties: description: Miyoo "^mntre,.*": description: MNT Research GmbH + "^mobileye,.*": + description: Mobileye Vision Technologies Ltd. "^modtronix,.*": description: Modtronix Engineering "^moortec,.*": @@ -999,6 +1025,9 @@ patternProperties: description: Novatek "^novtech,.*": description: NovTech, Inc. + "^numonyx,.*": + description: Numonyx (deprecated, use micron) + deprecated: true "^nutsboard,.*": description: NutsBoard "^nuvoton,.*": @@ -1303,6 +1332,8 @@ patternProperties: description: Skyworks Solutions, Inc. "^smartlabs,.*": description: SmartLabs LLC + "^smartrg,.*": + description: SmartRG, Inc. "^smi,.*": description: Silicon Motion Technology Corporation "^smsc,.*": @@ -1542,10 +1573,16 @@ patternProperties: description: VoCore Studio "^voipac,.*": description: Voipac Technologies s.r.o. + "^voltafield,.*": + description: Voltafield Technology Corp. "^vot,.*": description: Vision Optical Technology Co., Ltd. + "^vscom,.*": + description: VS Visions Systems GmbH "^vxt,.*": description: VXT Ltd + "^wacom,.*": + description: Wacom "^wanchanglong,.*": description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd. "^wand,.*": diff --git a/Documentation/devicetree/bindings/w1/w1-uart.yaml b/Documentation/devicetree/bindings/w1/w1-uart.yaml new file mode 100644 index 00000000000000..bd7c62d780b82d --- /dev/null +++ b/Documentation/devicetree/bindings/w1/w1-uart.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/w1/w1-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UART 1-Wire Bus + +maintainers: + - Christoph Winklhofer <cj.winklhofer@gmail.com> + +description: | + UART 1-wire bus. Utilizes the UART interface via the Serial Device Bus + to create the 1-Wire timing patterns. + + The UART peripheral must support full-duplex and operate in open-drain + mode. The timing patterns are generated by a specific combination of + baud-rate and transmitted byte, which corresponds to a 1-Wire read bit, + write bit or reset pulse. + + The default baud-rate for reset and presence detection is 9600 and for + a 1-Wire read or write operation 115200. In case the actual baud-rate + is different from the requested one, the transmitted byte is adapted + to generate the 1-Wire timing patterns. + + https://www.analog.com/en/technical-articles/using-a-uart-to-implement-a-1wire-bus-master.html + +properties: + compatible: + const: w1-uart + + reset-bps: + default: 9600 + description: + The baud rate for the 1-Wire reset and presence detect. + + write-0-bps: + default: 115200 + description: + The baud rate for the 1-Wire write-0 cycle. + + write-1-bps: + default: 115200 + description: + The baud rate for the 1-Wire write-1 and read cycle. + +required: + - compatible + +additionalProperties: + type: object + +examples: + - | + serial { + onewire { + compatible = "w1-uart"; + }; + }; diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml index 7aea255b301be5..bd7c09ed193855 100644 --- a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml +++ b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml @@ -50,6 +50,10 @@ properties: - const: wdog_clk - const: apb_pclk + resets: + maxItems: 1 + description: WDOGRESn input reset signal for sp805 module. + required: - compatible - reg @@ -67,4 +71,5 @@ examples: interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wdt_clk>, <&apb_pclk>; clock-names = "wdog_clk", "apb_pclk"; + resets = <&wdt_rst>; }; diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml index 816f85ee2c7722..cdf87db361837e 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml @@ -14,10 +14,14 @@ allOf: properties: compatible: - enum: - - atmel,sama5d4-wdt - - microchip,sam9x60-wdt - - microchip,sama7g5-wdt + oneOf: + - enum: + - atmel,sama5d4-wdt + - microchip,sam9x60-wdt + - microchip,sama7g5-wdt + - items: + - const: microchip,sam9x7-wdt + - const: microchip,sam9x60-wdt reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt b/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt deleted file mode 100644 index f801d71de1cd42..00000000000000 --- a/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt +++ /dev/null @@ -1,18 +0,0 @@ -BCM2835 Watchdog timer - -Required properties: - -- compatible : should be "brcm,bcm2835-pm-wdt" -- reg : Specifies base physical address and size of the registers. - -Optional properties: - -- timeout-sec : Contains the watchdog timeout in seconds - -Example: - -watchdog { - compatible = "brcm,bcm2835-pm-wdt"; - reg = <0x7e100000 0x28>; - timeout-sec = <10>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml index a4f35c598cdb54..47587971fb0b7c 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Krait Processor Sub-system (KPSS) Watchdog timer maintainers: - - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> + - Rajendra Nayak <quic_rjendra@quicinc.com> properties: $nodename: diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml index 951a7d54135a68..ffb17add491af9 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml @@ -71,6 +71,7 @@ properties: - renesas,r8a779a0-wdt # R-Car V3U - renesas,r8a779f0-wdt # R-Car S4-8 - renesas,r8a779g0-wdt # R-Car V4H + - renesas,r8a779h0-wdt # R-Car V4M - const: renesas,rcar-gen4-wdt # R-Car Gen4 reg: diff --git a/Documentation/devicetree/bindings/watchdog/sprd,sp9860-wdt.yaml b/Documentation/devicetree/bindings/watchdog/sprd,sp9860-wdt.yaml new file mode 100644 index 00000000000000..730d9a3a3cc55b --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/sprd,sp9860-wdt.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/sprd,sp9860-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SP9860 watchdog timer + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: sprd,sp9860-wdt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: enable + - const: rtc_enable + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - timeout-sec + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/sprd,sc9860-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + watchdog@40310000 { + compatible = "sprd,sp9860-wdt"; + reg = <0 0x40310000 0 0x1000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&aon_gate CLK_APCPU_WDG_EB>, <&aon_gate CLK_AP_WDG_RTC_EB>; + clock-names = "enable", "rtc_enable"; + timeout-sec = <12>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt deleted file mode 100644 index aeaf3e0caf47b2..00000000000000 --- a/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt +++ /dev/null @@ -1,19 +0,0 @@ -Spreadtrum SoCs Watchdog timer - -Required properties: -- compatible : Should be "sprd,sp9860-wdt". -- reg : Specifies base physical address and size of the registers. -- interrupts : Exactly one interrupt specifier. -- timeout-sec : Contain the default watchdog timeout in seconds. -- clock-names : Contain the input clock names. -- clocks : Phandles to input clocks. - -Example: - watchdog: watchdog@40310000 { - compatible = "sprd,sp9860-wdt"; - reg = <0 0x40310000 0 0x1000>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - timeout-sec = <12>; - clock-names = "enable", "rtc_enable"; - clocks = <&clk_aon_apb_gates1 8>, <&clk_aon_apb_rtc_gates 9>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml b/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml index 68f3f6fd08a628..e21f807b0b69ff 100644 --- a/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml @@ -19,14 +19,16 @@ description: isn't cleared, the watchdog will reset the system unless the watchdog reset is disabled. -allOf: - - $ref: watchdog.yaml# - properties: compatible: - enum: - - starfive,jh7100-wdt - - starfive,jh7110-wdt + oneOf: + - enum: + - starfive,jh7100-wdt + - starfive,jh7110-wdt + - items: + - enum: + - starfive,jh8100-wdt + - const: starfive,jh7110-wdt reg: maxItems: 1 @@ -45,9 +47,8 @@ properties: - const: core resets: - items: - - description: APB reset - - description: Core reset + minItems: 1 + maxItems: 2 required: - compatible @@ -56,6 +57,27 @@ required: - clock-names - resets +allOf: + - $ref: watchdog.yaml# + + - if: + properties: + compatible: + contains: + enum: + - starfive,jh8100-wdt + then: + properties: + resets: + items: + - description: Core reset + else: + properties: + resets: + items: + - description: APB reset + - description: Core reset + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst index 0a6cf19a14599b..7e71cdd1d6ded6 100644 --- a/Documentation/devicetree/bindings/writing-schema.rst +++ b/Documentation/devicetree/bindings/writing-schema.rst @@ -31,7 +31,7 @@ $schema Indicates the meta-schema the schema file adheres to. title - A one-line description on the contents of the binding schema. + A one-line description of the hardware being described in the binding schema. maintainers A DT specific property. Contains a list of email address(es) @@ -39,7 +39,7 @@ maintainers description Optional. A multi-line text block containing any detailed - information about this binding. It should contain things such as what the block + information about this hardware. It should contain things such as what the block or device does, standards the device conforms to, and links to datasheets for more information. @@ -71,9 +71,31 @@ required A list of DT properties from the 'properties' section that must always be present. +additionalProperties / unevaluatedProperties + Keywords controlling how schema will validate properties not matched by this + schema's 'properties' or 'patternProperties'. Each schema is supposed to + have exactly one of these keywords in top-level part, so either + additionalProperties or unevaluatedProperties. Nested nodes, so properties + being objects, are supposed to have one as well. + + * additionalProperties: false + Most common case, where no additional schema is referenced or if this + binding allows subset of properties from other referenced schemas. + + * unevaluatedProperties: false + Used when this binding references other schema whose all properties + should be allowed. + + * additionalProperties: true + Rare case, used for schemas implementing common set of properties. Such + schemas are supposed to be referenced by other schemas, which then use + 'unevaluatedProperties: false'. Typically bus or common-part schemas. + examples - Optional. A list of one or more DTS hunks implementing the - binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead. + Optional. A list of one or more DTS hunks implementing this binding only. + Example should not contain unrelated device nodes, e.g. consumer nodes in a + provider binding, other nodes referenced by phandle. + Note: YAML doesn't allow leading tabs, so spaces must be used instead. Unless noted otherwise, all properties are required. diff --git a/Documentation/driver-api/device-io.rst b/Documentation/driver-api/device-io.rst index d55384b106bd4e..5c7e8194bef92b 100644 --- a/Documentation/driver-api/device-io.rst +++ b/Documentation/driver-api/device-io.rst @@ -517,6 +517,3 @@ Public Functions Provided .. kernel-doc:: arch/x86/include/asm/io.h :internal: - -.. kernel-doc:: lib/pci_iomap.c - :export: diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst index c5f99d834ec56a..7be8b8dd5f00ad 100644 --- a/Documentation/driver-api/driver-model/devres.rst +++ b/Documentation/driver-api/driver-model/devres.rst @@ -420,6 +420,7 @@ POWER devm_reboot_mode_unregister() PWM + devm_pwmchip_alloc() devm_pwmchip_add() devm_pwm_get() devm_fwnode_pwm_get() @@ -462,7 +463,7 @@ SLAVE DMA ENGINE SPI devm_spi_alloc_master() devm_spi_alloc_slave() - devm_spi_register_master() + devm_spi_register_controller() WATCHDOG devm_watchdog_register_device() diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst index 3e588b9d678cf9..ab56ab0dd7a693 100644 --- a/Documentation/driver-api/gpio/consumer.rst +++ b/Documentation/driver-api/gpio/consumer.rst @@ -222,9 +222,9 @@ Use the following calls to access GPIOs from an atomic context:: int gpiod_get_value(const struct gpio_desc *desc); void gpiod_set_value(struct gpio_desc *desc, int value); -The values are boolean, zero for low, nonzero for high. When reading the value -of an output pin, the value returned should be what's seen on the pin. That -won't always match the specified output value, because of issues including +The values are boolean, zero for inactive, nonzero for active. When reading the +value of an output pin, the value returned should be what's seen on the pin. +That won't always match the specified output value, because of issues including open-drain signaling and output latencies. The get/set calls do not return errors because "invalid GPIO" should have been @@ -277,11 +277,11 @@ switch their output to a high impedance value. The consumer should not need to care. (For details read about open drain in driver.rst.) With this, all the gpiod_set_(array)_value_xxx() functions interpret the -parameter "value" as "asserted" ("1") or "de-asserted" ("0"). The physical line +parameter "value" as "active" ("1") or "inactive" ("0"). The physical line level will be driven accordingly. As an example, if the active low property for a dedicated GPIO is set, and the -gpiod_set_(array)_value_xxx() passes "asserted" ("1"), the physical line level +gpiod_set_(array)_value_xxx() passes "active" ("1"), the physical line level will be driven low. To summarize:: diff --git a/Documentation/driver-api/media/drivers/ccs/ccs.rst b/Documentation/driver-api/media/drivers/ccs/ccs.rst index 776eec72bc80a1..5d4451339b7fbc 100644 --- a/Documentation/driver-api/media/drivers/ccs/ccs.rst +++ b/Documentation/driver-api/media/drivers/ccs/ccs.rst @@ -2,59 +2,16 @@ .. include:: <isonum.txt> +.. _media-ccs-driver: + MIPI CCS camera sensor driver ============================= The MIPI CCS camera sensor driver is a generic driver for `MIPI CCS <https://www.mipi.org/specifications/camera-command-set>`_ compliant -camera sensors. It exposes three sub-devices representing the pixel array, -the binner and the scaler. - -As the capabilities of individual devices vary, the driver exposes -interfaces based on the capabilities that exist in hardware. - -Pixel Array sub-device ----------------------- - -The pixel array sub-device represents the camera sensor's pixel matrix, as well -as analogue crop functionality present in many compliant devices. The analogue -crop is configured using the ``V4L2_SEL_TGT_CROP`` on the source pad (0) of the -entity. The size of the pixel matrix can be obtained by getting the -``V4L2_SEL_TGT_NATIVE_SIZE`` target. - -Binner ------- - -The binner sub-device represents the binning functionality on the sensor. For -that purpose, selection target ``V4L2_SEL_TGT_COMPOSE`` is supported on the -sink pad (0). - -Additionally, if a device has no scaler or digital crop functionality, the -source pad (1) exposes another digital crop selection rectangle that can only -crop at the end of the lines and frames. - -Scaler ------- - -The scaler sub-device represents the digital crop and scaling functionality of -the sensor. The V4L2 selection target ``V4L2_SEL_TGT_CROP`` is used to -configure the digital crop on the sink pad (0) when digital crop is supported. -Scaling is configured using selection target ``V4L2_SEL_TGT_COMPOSE`` on the -sink pad (0) as well. - -Additionally, if the scaler sub-device exists, its source pad (1) exposes -another digital crop selection rectangle that can only crop at the end of the -lines and frames. - -Digital and analogue crop -------------------------- - -Digital crop functionality is referred to as cropping that effectively works by -dropping some data on the floor. Analogue crop, on the other hand, means that -the cropped information is never retrieved. In case of camera sensors, the -analogue data is never read from the pixel matrix that are outside the -configured selection rectangle that designates crop. The difference has an -effect in device timing and likely also in power consumption. +camera sensors. + +Also see :ref:`the CCS driver UAPI documentation <media-ccs-uapi>`. CCS static data --------------- diff --git a/Documentation/driver-api/media/v4l2-subdev.rst b/Documentation/driver-api/media/v4l2-subdev.rst index 1db2ba27c54c3d..13aec460e802f6 100644 --- a/Documentation/driver-api/media/v4l2-subdev.rst +++ b/Documentation/driver-api/media/v4l2-subdev.rst @@ -229,7 +229,7 @@ Asynchronous sub-device notifier for sub-devices ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ A driver that registers an asynchronous sub-device may also register an -asynchronous notifier. This is called an asynchronous sub-device notifier andthe +asynchronous notifier. This is called an asynchronous sub-device notifier and the process is similar to that of a bridge driver apart from that the notifier is initialised using :c:func:`v4l2_async_subdev_nf_init` instead. A sub-device notifier may complete only after the V4L2 device becomes available, i.e. there's diff --git a/Documentation/driver-api/pci/pci.rst b/Documentation/driver-api/pci/pci.rst index 4843cfad4f60bb..aa40b1cc243b84 100644 --- a/Documentation/driver-api/pci/pci.rst +++ b/Documentation/driver-api/pci/pci.rst @@ -4,6 +4,12 @@ PCI Support Library .. kernel-doc:: drivers/pci/pci.c :export: +.. kernel-doc:: drivers/pci/iomap.c + :export: + +.. kernel-doc:: drivers/pci/devres.c + :export: + .. kernel-doc:: drivers/pci/pci-driver.c :export: diff --git a/Documentation/driver-api/pwm.rst b/Documentation/driver-api/pwm.rst index 3c28ccc4b61133..b41b1c56477f3d 100644 --- a/Documentation/driver-api/pwm.rst +++ b/Documentation/driver-api/pwm.rst @@ -143,11 +143,12 @@ to implement the pwm_*() functions itself. This means that it's impossible to have multiple PWM drivers in the system. For this reason it's mandatory for new drivers to use the generic PWM framework. -A new PWM controller/chip can be added using pwmchip_add() and removed -again with pwmchip_remove(). pwmchip_add() takes a filled in struct -pwm_chip as argument which provides a description of the PWM chip, the -number of PWM devices provided by the chip and the chip-specific -implementation of the supported PWM operations to the framework. +A new PWM controller/chip can be allocated using pwmchip_alloc(), then +registered using pwmchip_add() and removed again with pwmchip_remove(). To undo +pwmchip_alloc() use pwmchip_put(). pwmchip_add() takes a filled in struct +pwm_chip as argument which provides a description of the PWM chip, the number +of PWM devices provided by the chip and the chip-specific implementation of the +supported PWM operations to the framework. When implementing polarity support in a PWM driver, make sure to respect the signal conventions in the PWM framework. By definition, normal polarity diff --git a/Documentation/driver-api/soundwire/stream.rst b/Documentation/driver-api/soundwire/stream.rst index b432a2de45d37b..2a794484f62c97 100644 --- a/Documentation/driver-api/soundwire/stream.rst +++ b/Documentation/driver-api/soundwire/stream.rst @@ -324,12 +324,12 @@ framework, this stream state is linked to .hw_params() operation. int sdw_stream_add_master(struct sdw_bus * bus, struct sdw_stream_config * stream_config, - struct sdw_ports_config * ports_config, + const struct sdw_ports_config * ports_config, struct sdw_stream_runtime * stream); int sdw_stream_add_slave(struct sdw_slave * slave, struct sdw_stream_config * stream_config, - struct sdw_ports_config * ports_config, + const struct sdw_ports_config * ports_config, struct sdw_stream_runtime * stream); diff --git a/Documentation/driver-api/tty/console.rst b/Documentation/driver-api/tty/console.rst new file mode 100644 index 00000000000000..4348e36cd33b34 --- /dev/null +++ b/Documentation/driver-api/tty/console.rst @@ -0,0 +1,45 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======= +Console +======= + +.. contents:: :local: + +Struct Console +============== + +.. kernel-doc:: include/linux/console.h + :identifiers: console cons_flags + +Internals +--------- + +.. kernel-doc:: include/linux/console.h + :identifiers: nbcon_state nbcon_prio nbcon_context nbcon_write_context + +Struct Consw +============ + +.. kernel-doc:: include/linux/console.h + :identifiers: consw + +Console functions +================= + +.. kernel-doc:: include/linux/console.h + :identifiers: console_srcu_read_flags console_srcu_write_flags + console_is_registered for_each_console_srcu for_each_console + +.. kernel-doc:: drivers/tty/vt/selection.c + :export: +.. kernel-doc:: drivers/tty/vt/vt.c + :export: + +Internals +--------- + +.. kernel-doc:: drivers/tty/vt/selection.c + :internal: +.. kernel-doc:: drivers/tty/vt/vt.c + :internal: diff --git a/Documentation/driver-api/tty/index.rst b/Documentation/driver-api/tty/index.rst index b490da11f257fc..c1ffe3d1ec4699 100644 --- a/Documentation/driver-api/tty/index.rst +++ b/Documentation/driver-api/tty/index.rst @@ -38,6 +38,7 @@ In-detail description of the named TTY structures is in separate documents: tty_buffer tty_ioctl tty_internals + console Writing TTY Driver ================== diff --git a/Documentation/driver-api/usb/callbacks.rst b/Documentation/driver-api/usb/callbacks.rst index 2b80cf54bcc311..927da49b8f002f 100644 --- a/Documentation/driver-api/usb/callbacks.rst +++ b/Documentation/driver-api/usb/callbacks.rst @@ -99,8 +99,10 @@ The disconnect() callback This callback is a signal to break any connection with an interface. You are not allowed any IO to a device after returning from this callback. You also may not do any other operation that may interfere -with another driver bound the interface, eg. a power management -operation. +with another driver bound to the interface, eg. a power management +operation. Outstanding operations on the device must be completed or +aborted before this callback may return. + If you are called due to a physical disconnection, all your URBs will be killed by usbcore. Note that in this case disconnect will be called some time after the physical disconnection. Thus your driver must be prepared diff --git a/Documentation/filesystems/bcachefs/errorcodes.rst b/Documentation/filesystems/bcachefs/errorcodes.rst new file mode 100644 index 00000000000000..2cccaa0ba7cd4d --- /dev/null +++ b/Documentation/filesystems/bcachefs/errorcodes.rst @@ -0,0 +1,30 @@ +.. SPDX-License-Identifier: GPL-2.0 + +bcachefs private error codes +---------------------------- + +In bcachefs, as a hard rule we do not throw or directly use standard error +codes (-EINVAL, -EBUSY, etc.). Instead, we define private error codes as needed +in fs/bcachefs/errcode.h. + +This gives us much better error messages and makes debugging much easier. Any +direct uses of standard error codes you see in the source code are simply old +code that has yet to be converted - feel free to clean it up! + +Private error codes may subtype another error code, this allows for grouping of +related errors that should be handled similarly (e.g. transaction restart +errors), as well as specifying which standard error code should be returned at +the bcachefs module boundary. + +At the module boundary, we use bch2_err_class() to convert to a standard error +code; this also emits a trace event so that the original error code be +recovered even if it wasn't logged. + +Do not reuse error codes! Generally speaking, a private error code should only +be thrown in one place. That means that when we see it in a log message we can +see, unambiguously, exactly which file and line number it was returned from. + +Try to give error codes names that are as reasonably descriptive of the error +as possible. Frequently, the error will be logged at a place far removed from +where the error was generated; good names for error codes mean much more +descriptive and useful error messages. diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst index d32c6209685d64..efc3493fd6f84b 100644 --- a/Documentation/filesystems/f2fs.rst +++ b/Documentation/filesystems/f2fs.rst @@ -126,9 +126,7 @@ norecovery Disable the roll-forward recovery routine, mounted read- discard/nodiscard Enable/disable real-time discard in f2fs, if discard is enabled, f2fs will issue discard/TRIM commands when a segment is cleaned. -no_heap Disable heap-style segment allocation which finds free - segments for data from the beginning of main area, while - for node from the end of main area. +heap/no_heap Deprecated. nouser_xattr Disable Extended User Attributes. Note: xattr is enabled by default if CONFIG_F2FS_FS_XATTR is selected. noacl Disable POSIX Access Control List. Note: acl is enabled @@ -184,29 +182,31 @@ fault_type=%d Support configuring fault injection type, should be enabled with fault_injection option, fault type value is shown below, it supports single or combined type. - =================== =========== - Type_Name Type_Value - =================== =========== - FAULT_KMALLOC 0x000000001 - FAULT_KVMALLOC 0x000000002 - FAULT_PAGE_ALLOC 0x000000004 - FAULT_PAGE_GET 0x000000008 - FAULT_ALLOC_BIO 0x000000010 (obsolete) - FAULT_ALLOC_NID 0x000000020 - FAULT_ORPHAN 0x000000040 - FAULT_BLOCK 0x000000080 - FAULT_DIR_DEPTH 0x000000100 - FAULT_EVICT_INODE 0x000000200 - FAULT_TRUNCATE 0x000000400 - FAULT_READ_IO 0x000000800 - FAULT_CHECKPOINT 0x000001000 - FAULT_DISCARD 0x000002000 - FAULT_WRITE_IO 0x000004000 - FAULT_SLAB_ALLOC 0x000008000 - FAULT_DQUOT_INIT 0x000010000 - FAULT_LOCK_OP 0x000020000 - FAULT_BLKADDR 0x000040000 - =================== =========== + =========================== =========== + Type_Name Type_Value + =========================== =========== + FAULT_KMALLOC 0x000000001 + FAULT_KVMALLOC 0x000000002 + FAULT_PAGE_ALLOC 0x000000004 + FAULT_PAGE_GET 0x000000008 + FAULT_ALLOC_BIO 0x000000010 (obsolete) + FAULT_ALLOC_NID 0x000000020 + FAULT_ORPHAN 0x000000040 + FAULT_BLOCK 0x000000080 + FAULT_DIR_DEPTH 0x000000100 + FAULT_EVICT_INODE 0x000000200 + FAULT_TRUNCATE 0x000000400 + FAULT_READ_IO 0x000000800 + FAULT_CHECKPOINT 0x000001000 + FAULT_DISCARD 0x000002000 + FAULT_WRITE_IO 0x000004000 + FAULT_SLAB_ALLOC 0x000008000 + FAULT_DQUOT_INIT 0x000010000 + FAULT_LOCK_OP 0x000020000 + FAULT_BLKADDR_VALIDITY 0x000040000 + FAULT_BLKADDR_CONSISTENCE 0x000080000 + FAULT_NO_SEGMENT 0x000100000 + =========================== =========== mode=%s Control block allocation mode which supports "adaptive" and "lfs". In "lfs" mode, there should be no random writes towards main area. @@ -228,8 +228,6 @@ mode=%s Control block allocation mode which supports "adaptive" option for more randomness. Please, use these options for your experiments and we strongly recommend to re-format the filesystem after using these options. -io_bits=%u Set the bit size of write IO requests. It should be set - with "mode=lfs". usrquota Enable plain user disk quota accounting. grpquota Enable plain group disk quota accounting. prjquota Enable plain project quota accounting. diff --git a/Documentation/filesystems/xfs/xfs-online-fsck-design.rst b/Documentation/filesystems/xfs/xfs-online-fsck-design.rst index 352516feef6ffe..6333697ba3e821 100644 --- a/Documentation/filesystems/xfs/xfs-online-fsck-design.rst +++ b/Documentation/filesystems/xfs/xfs-online-fsck-design.rst @@ -1915,19 +1915,13 @@ four of those five higher level data structures. The fifth use case is discussed in the :ref:`realtime summary <rtsummary>` case study. -The most general storage interface supported by the xfile enables the reading -and writing of arbitrary quantities of data at arbitrary offsets in the xfile. -This capability is provided by ``xfile_pread`` and ``xfile_pwrite`` functions, -which behave similarly to their userspace counterparts. XFS is very record-based, which suggests that the ability to load and store complete records is important. -To support these cases, a pair of ``xfile_obj_load`` and ``xfile_obj_store`` -functions are provided to read and persist objects into an xfile. -They are internally the same as pread and pwrite, except that they treat any -error as an out of memory error. -For online repair, squashing error conditions in this manner is an acceptable -behavior because the only reaction is to abort the operation back to userspace. -All five xfile usecases can be serviced by these four functions. +To support these cases, a pair of ``xfile_load`` and ``xfile_store`` +functions are provided to read and persist objects into an xfile that treat any +error as an out of memory error. For online repair, squashing error conditions +in this manner is an acceptable behavior because the only reaction is to abort +the operation back to userspace. However, no discussion of file access idioms is complete without answering the question, "But what about mmap?" @@ -1939,15 +1933,14 @@ tmpfs can only push a pagecache folio to the swap cache if the folio is neither pinned nor locked, which means the xfile must not pin too many folios. Short term direct access to xfile contents is done by locking the pagecache -folio and mapping it into kernel address space. -Programmatic access (e.g. pread and pwrite) uses this mechanism. -Folio locks are not supposed to be held for long periods of time, so long -term direct access to xfile contents is done by bumping the folio refcount, +folio and mapping it into kernel address space. Object load and store uses this +mechanism. Folio locks are not supposed to be held for long periods of time, so +long term direct access to xfile contents is done by bumping the folio refcount, mapping it into kernel address space, and dropping the folio lock. These long term users *must* be responsive to memory reclaim by hooking into the shrinker infrastructure to know when to release folios. -The ``xfile_get_page`` and ``xfile_put_page`` functions are provided to +The ``xfile_get_folio`` and ``xfile_put_folio`` functions are provided to retrieve the (locked) folio that backs part of an xfile and to release it. The only code to use these folio lease functions are the xfarray :ref:`sorting<xfarray_sort>` algorithms and the :ref:`in-memory @@ -2277,13 +2270,12 @@ follows: pointing to the xfile. 3. Pass the buffer cache target, buffer ops, and other information to - ``xfbtree_create`` to write an initial tree header and root block to the - xfile. + ``xfbtree_init`` to initialize the passed in ``struct xfbtree`` and write an + initial root block to the xfile. Each btree type should define a wrapper that passes necessary arguments to the creation function. For example, rmap btrees define ``xfs_rmapbt_mem_create`` to take care of all the necessary details for callers. - A ``struct xfbtree`` object will be returned. 4. Pass the xfbtree object to the btree cursor creation function for the btree type. diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst index d6b61d22f52584..c52b9da08fa9a2 100644 --- a/Documentation/firmware-guide/acpi/apei/einj.rst +++ b/Documentation/firmware-guide/acpi/apei/einj.rst @@ -32,6 +32,10 @@ configuration:: CONFIG_ACPI_APEI CONFIG_ACPI_APEI_EINJ +...and to (optionally) enable CXL protocol error injection set:: + + CONFIG_ACPI_APEI_EINJ_CXL + The EINJ user interface is in <debugfs mount point>/apei/einj. The following files belong to it: @@ -118,6 +122,24 @@ The following files belong to it: this actually works depends on what operations the BIOS actually includes in the trigger phase. +CXL error types are supported from ACPI 6.5 onwards (given a CXL port +is present). The EINJ user interface for CXL error types is at +<debugfs mount point>/cxl. The following files belong to it: + +- einj_types: + + Provides the same functionality as available_error_types above, but + for CXL error types + +- $dport_dev/einj_inject: + + Injects a CXL error type into the CXL port represented by $dport_dev, + where $dport_dev is the name of the CXL port (usually a PCIe device name). + Error injections targeting a CXL 2.0+ port can use the legacy interface + under <debugfs mount point>/apei/einj, while CXL 1.1/1.0 port injections + must use this file. + + BIOS versions based on the ACPI 4.0 specification have limited options in controlling where the errors are injected. Your BIOS may support an extension (enabled with the param_extension=1 module parameter, or boot @@ -181,6 +203,18 @@ You should see something like this in dmesg:: [22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0 [22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0) +A CXL error injection example with $dport_dev=0000:e0:01.1:: + + # cd /sys/kernel/debug/cxl/ + # ls + 0000:e0:01.1 0000:0c:00.0 + # cat einj_types # See which errors can be injected + 0x00008000 CXL.mem Protocol Correctable + 0x00010000 CXL.mem Protocol Uncorrectable non-fatal + 0x00020000 CXL.mem Protocol Uncorrectable fatal + # cd 0000:e0:01.1 # Navigate to dport to inject into + # echo 0x8000 > einj_inject # Inject error + Special notes for injection into SGX enclaves: There may be a separate BIOS setup option to enable SGX injection. diff --git a/Documentation/firmware-guide/acpi/enumeration.rst b/Documentation/firmware-guide/acpi/enumeration.rst index d79f693909913b..0165b09c0957f5 100644 --- a/Documentation/firmware-guide/acpi/enumeration.rst +++ b/Documentation/firmware-guide/acpi/enumeration.rst @@ -595,7 +595,7 @@ bridges/switches of the board. For example, let's assume we have a system with a PCIe serial port, an Exar XR17V3521, soldered on the main board. This UART chip also includes -16 GPIOs and we want to add the property ``gpio-line-names`` [1] to these pins. +16 GPIOs and we want to add the property ``gpio-line-names`` [1]_ to these pins. In this case, the ``lspci`` output for this component is:: 07:00.0 Serial controller: Exar Corp. XR17V3521 Dual PCIe UART (rev 03) @@ -637,7 +637,7 @@ of the chipset bridge (also called "root port") with address:: Bus: 0 - Device: 14 - Function: 1 To find this information, it is necessary to disassemble the BIOS ACPI tables, -in particular the DSDT (see also [2]):: +in particular the DSDT (see also [2]_):: mkdir ~/tables/ cd ~/tables/ @@ -667,7 +667,7 @@ device:: } ... other definitions follow ... -and the _ADR method [3] returns exactly the device/function couple that +and the _ADR method [3]_ returns exactly the device/function couple that we are looking for. With this information and analyzing the above ``lspci`` output (both the devices list and the devices tree), we can write the following ACPI description for the Exar PCIe UART, also adding the list of its GPIO line @@ -724,10 +724,10 @@ created analyzing the position of the Exar UART in the PCI bus topology. References ========== -[1] Documentation/firmware-guide/acpi/gpio-properties.rst +.. [1] Documentation/firmware-guide/acpi/gpio-properties.rst -[2] Documentation/admin-guide/acpi/initrd_table_override.rst +.. [2] Documentation/admin-guide/acpi/initrd_table_override.rst -[3] ACPI Specifications, Version 6.3 - Paragraph 6.1.1 _ADR Address) +.. [3] ACPI Specifications, Version 6.3 - Paragraph 6.1.1 _ADR Address) https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf, referenced 2020-11-18 diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst index b6a42f4ffe0328..b246902f523fe4 100644 --- a/Documentation/firmware-guide/acpi/index.rst +++ b/Documentation/firmware-guide/acpi/index.rst @@ -14,7 +14,6 @@ ACPI Support dsd/phy enumeration osi - method-customizing method-tracing DSD-properties-rules debug diff --git a/Documentation/firmware-guide/acpi/method-customizing.rst b/Documentation/firmware-guide/acpi/method-customizing.rst deleted file mode 100644 index de3ebcaed4cf0a..00000000000000 --- a/Documentation/firmware-guide/acpi/method-customizing.rst +++ /dev/null @@ -1,89 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -======================================= -Linux ACPI Custom Control Method How To -======================================= - -:Author: Zhang Rui <rui.zhang@intel.com> - - -Linux supports customizing ACPI control methods at runtime. - -Users can use this to: - -1. override an existing method which may not work correctly, - or just for debugging purposes. -2. insert a completely new method in order to create a missing - method such as _OFF, _ON, _STA, _INI, etc. - -For these cases, it is far simpler to dynamically install a single -control method rather than override the entire DSDT, because kernel -rebuild/reboot is not needed and test result can be got in minutes. - -.. note:: - - - Only ACPI METHOD can be overridden, any other object types like - "Device", "OperationRegion", are not recognized. Methods - declared inside scope operators are also not supported. - - - The same ACPI control method can be overridden for many times, - and it's always the latest one that used by Linux/kernel. - - - To get the ACPI debug object output (Store (AAAA, Debug)), - please run:: - - echo 1 > /sys/module/acpi/parameters/aml_debug_output - - -1. override an existing method -============================== -a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT, - just run "cat /sys/firmware/acpi/tables/DSDT > /tmp/dsdt.dat" -b) disassemble the table by running "iasl -d dsdt.dat". -c) rewrite the ASL code of the method and save it in a new file, -d) package the new file (psr.asl) to an ACPI table format. - Here is an example of a customized \_SB._AC._PSR method:: - - DefinitionBlock ("", "SSDT", 1, "", "", 0x20080715) - { - Method (\_SB_.AC._PSR, 0, NotSerialized) - { - Store ("In AC _PSR", Debug) - Return (ACON) - } - } - - Note that the full pathname of the method in ACPI namespace - should be used. -e) assemble the file to generate the AML code of the method. - e.g. "iasl -vw 6084 psr.asl" (psr.aml is generated as a result) - If parameter "-vw 6084" is not supported by your iASL compiler, - please try a newer version. -f) mount debugfs by "mount -t debugfs none /sys/kernel/debug" -g) override the old method via the debugfs by running - "cat /tmp/psr.aml > /sys/kernel/debug/acpi/custom_method" - -2. insert a new method -====================== -This is easier than overriding an existing method. -We just need to create the ASL code of the method we want to -insert and then follow the step c) ~ g) in section 1. - -3. undo your changes -==================== -The "undo" operation is not supported for a new inserted method -right now, i.e. we can not remove a method currently. -For an overridden method, in order to undo your changes, please -save a copy of the method original ASL code in step c) section 1, -and redo step c) ~ g) to override the method with the original one. - - -.. note:: We can use a kernel with multiple custom ACPI method running, - But each individual write to debugfs can implement a SINGLE - method override. i.e. if we want to insert/override multiple - ACPI methods, we need to redo step c) ~ g) for multiple times. - -.. note:: Be aware that root can mis-use this driver to modify arbitrary - memory and gain additional rights, if root's privileges got - restricted (for example if root is not allowed to load additional - modules after boot). diff --git a/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv b/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv index 882d2518f8ed26..3825f00ca9fe84 100644 --- a/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv +++ b/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv @@ -16,6 +16,7 @@ Radeon (RX|TM) (PRO|WX) Vega /MI25 /V320 /V340L /8200 /9100 /SSG MxGPU, VEGA10, AMD Radeon (Pro) VII /MI50 /MI60, VEGA20, DCE 12, 9.4.0, VCE 4.1.0 / UVD 7.2.0, 4.2.0 MI100, ARCTURUS, *, 9.4.1, VCN 2.5.0, 4.2.2 MI200, ALDEBARAN, *, 9.4.2, VCN 2.6.0, 4.4.0 +MI300, AQUA_VANGARAM, *, 9.4.3, VCN 4.0.3, 4.4.2 AMD Radeon (RX|Pro) 5600(M|XT) /5700 (M|XT|XTB) /W5700, NAVI10, DCN 2.0.0, 10.1.10, VCN 2.0.0, 5.0.0 AMD Radeon (Pro) 5300 /5500XTB/5500(XT|M) /W5500M /W5500, NAVI14, DCN 2.0.0, 10.1.1, VCN 2.0.2, 5.0.2 AMD Radeon RX 6800(XT) /6900(XT) /W6800, SIENNA_CICHLID, DCN 3.0.0, 10.3.0, VCN 3.0.0, 5.2.0 @@ -23,4 +24,5 @@ AMD Radeon RX 6700 XT / 6800M / 6700M, NAVY_FLOUNDER, DCN 3.0.0, 10.3.2, VCN 3.0 AMD Radeon RX 6600(XT) /6600M /W6600 /W6600M, DIMGREY_CAVEFISH, DCN 3.0.2, 10.3.4, VCN 3.0.16, 5.2.4 AMD Radeon RX 6500M /6300M /W6500M /W6300M, BEIGE_GOBY, DCN 3.0.3, 10.3.5, VCN 3.0.33, 5.2.5 AMD Radeon RX 7900 XT /XTX, , DCN 3.2.0, 11.0.0, VCN 4.0.0, 6.0.0 +AMD Radeon RX 7800 XT, , DCN 3.2.0, 11.0.3, VCN 4.0.0, 6.0.3 AMD Radeon RX 7600M (XT) /7700S /7600S, , DCN 3.2.1, 11.0.2, VCN 4.0.4, 6.0.2 diff --git a/Documentation/gpu/amdgpu/display/dcn-blocks.rst b/Documentation/gpu/amdgpu/display/dcn-blocks.rst new file mode 100644 index 00000000000000..a3fbd3ea028bba --- /dev/null +++ b/Documentation/gpu/amdgpu/display/dcn-blocks.rst @@ -0,0 +1,78 @@ +========== +DCN Blocks +========== + +In this section, you will find some extra details about some of the DCN blocks +and the code documentation when it is automatically generated. + +DCHUBBUB +-------- + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h + :export: + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h + :internal: + +HUBP +---- + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h + :export: + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h + :internal: + +DPP +--- + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h + :export: + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h + :internal: + +MPC +--- + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h + :export: + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h + :internal: + +OPP +--- + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/opp.h + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/opp.h + :export: + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/opp.h + :internal: + +DIO +--- + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h + :export: + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h + :internal: diff --git a/Documentation/gpu/amdgpu/display/display-contributing.rst b/Documentation/gpu/amdgpu/display/display-contributing.rst new file mode 100644 index 00000000000000..fdb2bea01d53a8 --- /dev/null +++ b/Documentation/gpu/amdgpu/display/display-contributing.rst @@ -0,0 +1,168 @@ +.. _display_todos: + +============================== +AMDGPU - Display Contributions +============================== + +First of all, if you are here, you probably want to give some technical +contribution to the display code, and for that, we say thank you :) + +This page summarizes some of the issues you can help with; keep in mind that +this is a static page, and it is always a good idea to try to reach developers +in the amdgfx or some of the maintainers. Finally, this page follows the DRM +way of creating a TODO list; for more information, check +'Documentation/gpu/todo.rst'. + +Gitlab issues +============= + +Users can report issues associated with AMD GPUs at: + +- https://gitlab.freedesktop.org/drm/amd + +Usually, we try to add a proper label to all new tickets to make it easy to +filter issues. If you can reproduce any problem, you could help by adding more +information or fixing the issue. + +Level: diverse + +IGT +=== + +`IGT`_ provides many integration tests that can be run on your GPU. We always +want to pass a large set of tests to increase the test coverage in our CI. If +you wish to contribute to the display code but are unsure where a good place +is, we recommend you run all IGT tests and try to fix any failure you see in +your hardware. Keep in mind that this failure can be an IGT problem or a kernel +issue; it is necessary to analyze case-by-case. + +Level: diverse + +.. _IGT: https://gitlab.freedesktop.org/drm/igt-gpu-tools + +Compilation +=========== + +Fix compilation warnings +------------------------ + +Enable the W1 or W2 warning level in the kernel compilation and try to fix the +issues on the display side. + +Level: Starter + +Fix compilation issues when using um architecture +------------------------------------------------- + +Linux has a User-mode Linux (UML) feature, and the kernel can be compiled to +the **um** architecture. Compiling for **um** can bring multiple advantages +from the test perspective. We currently have some compilation issues in this +area that we need to fix. + +Level: Intermediate + +Code Refactor +============= + +Add prefix to DC functions to improve the debug with ftrace +----------------------------------------------------------- + +The Ftrace debug feature (check 'Documentation/trace/ftrace.rst') is a +fantastic way to check the code path when developers try to make sense of a +bug. Ftrace provides a filter mechanism that can be useful when the developer +has some hunch of which part of the code can cause the issue; for this reason, +if a set of functions has a proper prefix, it becomes easy to create a good +filter. Additionally, prefixes can improve stack trace readability. + +The DC code does not follow some prefix rules, which makes the Ftrace filter +more complicated and reduces the readability of the stack trace. If you want +something simple to start contributing to the display, you can make patches for +adding prefixes to DC functions. To create those prefixes, use part of the file +name as a prefix for all functions in the target file. Check the +'amdgpu_dm_crtc.c` and `amdgpu_dm_plane.c` for some references. However, we +strongly advise not to send huge patches changing these prefixes; otherwise, it +will be hard to review and test, which can generate second thoughts from +maintainers. Try small steps; in case of double, you can ask before you put in +effort. We recommend first looking at folders like dceXYZ, dcnXYZ, basics, +bios, core, clk_mgr, hwss, resource, and irq. + +Level: Starter + +Reduce code duplication +----------------------- + +AMD has an extensive portfolio with various dGPUs and APUs that amdgpu +supports. To maintain the new hardware release cadence, DCE/DCN was designed in +a modular design, making the bring-up for new hardware fast. Over the years, +amdgpu accumulated some technical debt in the code duplication area. For this +task, it would be a good idea to find a tool that can discover code duplication +(including patterns) and use it as guidance to reduce duplications. + +Level: Intermediate + +Make atomic_commit_[check|tail] more readable +--------------------------------------------- + +The functions responsible for atomic commit and tail are intricate and +extensive. In particular `amdgpu_dm_atomic_commit_tail` is a long function and +could benefit from being split into smaller helpers. Improvements in this area +are more than welcome, but keep in mind that changes in this area will affect +all ASICs, meaning that refactoring requires a comprehensive verification; in +other words, this effort can take some time for validation. + +Level: Advanced + +Documentation +============= + +Expand kernel-doc +----------------- + +Many DC functions do not have a proper kernel-doc; understanding a function and +adding documentation is a great way to learn more about the amdgpu driver and +also leave an outstanding contribution to the entire community. + +Level: Starter + +Beyond AMDGPU +============= + +AMDGPU provides features that are not yet enabled in the userspace. This +section highlights some of the coolest display features, which could be enabled +with the userspace developer helper. + +Enable underlay +--------------- + +AMD display has this feature called underlay (which you can read more about at +'Documentation/GPU/amdgpu/display/mpo-overview.rst') which is intended to +save power when playing a video. The basic idea is to put a video in the +underlay plane at the bottom and the desktop in the plane above it with a hole +in the video area. This feature is enabled in ChromeOS, and from our data +measurement, it can save power. + +Level: Unknown + +Adaptive Backlight Modulation (ABM) +----------------------------------- + +ABM is a feature that adjusts the display panel's backlight level and pixel +values depending on the displayed image. This power-saving feature can be very +useful when the system starts to run off battery; since this will impact the +display output fidelity, it would be good if this option was something that +users could turn on or off. + +Level: Unknown + + +HDR & Color management & VRR +---------------------------- + +HDR, Color Management, and VRR are huge topics and it's hard to put these into +concise ToDos. If you are interested in this topic, we recommend checking some +blog posts from the community developers to better understand some of the +specific challenges and people working on the subject. If anyone wants to work +on some particular part, we can try to help with some basic guidance. Finally, +keep in mind that we already have some kernel-doc in place for those areas. + +Level: Unknown diff --git a/Documentation/gpu/amdgpu/display/display-manager.rst b/Documentation/gpu/amdgpu/display/display-manager.rst index be2651ecdd7f2a..67a811e6891fb3 100644 --- a/Documentation/gpu/amdgpu/display/display-manager.rst +++ b/Documentation/gpu/amdgpu/display/display-manager.rst @@ -132,9 +132,6 @@ The DRM blend mode and its elements are then mapped by AMDGPU display manager (MPC), as follows: .. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h - :doc: mpc-overview - -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h :functions: mpcc_blnd_cfg Therefore, the blending configuration for a single MPCC instance on the MPC diff --git a/Documentation/gpu/amdgpu/display/index.rst b/Documentation/gpu/amdgpu/display/index.rst index f8a4f53d70d8c6..f0c342e00a392b 100644 --- a/Documentation/gpu/amdgpu/display/index.rst +++ b/Documentation/gpu/amdgpu/display/index.rst @@ -7,18 +7,80 @@ drm/amd/display - Display Core (DC) AMD display engine is partially shared with other operating systems; for this reason, our Display Core Driver is divided into two pieces: -1. **Display Core (DC)** contains the OS-agnostic components. Things like +#. **Display Core (DC)** contains the OS-agnostic components. Things like hardware programming and resource management are handled here. -2. **Display Manager (DM)** contains the OS-dependent components. Hooks to the - amdgpu base driver and DRM are implemented here. +#. **Display Manager (DM)** contains the OS-dependent components. Hooks to the + amdgpu base driver and DRM are implemented here. For example, you can check + display/amdgpu_dm/ folder. + +------------------ +DC Code validation +------------------ + +Maintaining the same code base across multiple OSes requires a lot of +synchronization effort between repositories and exhaustive validation. In the +DC case, we maintain a tree to centralize code from different parts. The shared +repository has integration tests with our Internal Linux CI farm, and we run a +comprehensive set of IGT tests in various AMD GPUs/APUs (mostly recent dGPUs +and APUs). Our CI also checks ARM64/32, PPC64/32, and x86_64/32 compilation +with DCN enabled and disabled. + +When we upstream a new feature or some patches, we pack them in a patchset with +the prefix **DC Patches for <DATE>**, which is created based on the latest +`amd-staging-drm-next <https://gitlab.freedesktop.org/agd5f/linux>`_. All of +those patches are under a DC version tested as follows: + +* Ensure that every patch compiles and the entire series pass our set of IGT + test in different hardware. +* Prepare a branch with those patches for our validation team. If there is an + error, a developer will debug as fast as possible; usually, a simple bisect + in the series is enough to point to a bad change, and two possible actions + emerge: fix the issue or drop the patch. If it is not an easy fix, the bad + patch is dropped. +* Finally, developers wait a few days for community feedback before we merge + the series. + +It is good to stress that the test phase is something that we take extremely +seriously, and we never merge anything that fails our validation. Follows an +overview of our test set: + +#. Manual test + * Multiple Hotplugs with DP and HDMI. + * Stress test with multiple display configuration changes via the user interface. + * Validate VRR behaviour. + * Check PSR. + * Validate MPO when playing video. + * Test more than two displays connected at the same time. + * Check suspend/resume. + * Validate FPO. + * Check MST. +#. Automated test + * IGT tests in a farm with GPUs and APUs that support DCN and DCE. + * Compilation validation with the latest GCC and Clang from LTS distro. + * Cross-compilation for PowerPC 64/32, ARM 64/32, and x86 32. + +In terms of test setup for CI and manual tests, we usually use: + +#. The latest Ubuntu LTS. +#. In terms of userspace, we only use fully updated open-source components + provided by the distribution official package manager. +#. Regarding IGT, we use the latest code from the upstream. +#. Most of the manual tests are conducted in the GNome but we also use KDE. + +Notice that someone from our test team will always reply to the cover letter +with the test report. + +-------------- +DC Information +-------------- The display pipe is responsible for "scanning out" a rendered frame from the GPU memory (also called VRAM, FrameBuffer, etc.) to a display. In other words, it would: -1. Read frame information from memory; -2. Perform required transformation; -3. Send pixel data to sink devices. +#. Read frame information from memory; +#. Perform required transformation; +#. Send pixel data to sink devices. If you want to learn more about our driver details, take a look at the below table of content: @@ -26,7 +88,9 @@ table of content: .. toctree:: display-manager.rst - dc-debug.rst dcn-overview.rst + dcn-blocks.rst mpo-overview.rst + dc-debug.rst + display-contributing.rst dc-glossary.rst diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst index 5fd20a306718cd..335de7fcddeecc 100644 --- a/Documentation/gpu/drm-internals.rst +++ b/Documentation/gpu/drm-internals.rst @@ -153,18 +153,6 @@ Managed Resources .. kernel-doc:: include/drm/drm_managed.h :internal: -Bus-specific Device Registration and PCI Support ------------------------------------------------- - -A number of functions are provided to help with device registration. The -functions deal with PCI and platform devices respectively and are only -provided for historical reasons. These are all deprecated and shouldn't -be used in new drivers. Besides that there's a few helpers for pci -drivers. - -.. kernel-doc:: drivers/gpu/drm/drm_pci.c - :export: - Open/Close, File Operations and IOCTLs ====================================== diff --git a/Documentation/gpu/drm-usage-stats.rst b/Documentation/gpu/drm-usage-stats.rst index 7aca5c7a7b1da6..6dc299343b485b 100644 --- a/Documentation/gpu/drm-usage-stats.rst +++ b/Documentation/gpu/drm-usage-stats.rst @@ -138,7 +138,7 @@ indicating kibi- or mebi-bytes. - drm-shared-<region>: <uint> [KiB|MiB] -The total size of buffers that are shared with another file (ie. have more +The total size of buffers that are shared with another file (e.g., have more than a single handle). - drm-total-<region>: <uint> [KiB|MiB] diff --git a/Documentation/gpu/introduction.rst b/Documentation/gpu/introduction.rst index f05eccd2c07c8a..b7c0baf97dbee2 100644 --- a/Documentation/gpu/introduction.rst +++ b/Documentation/gpu/introduction.rst @@ -164,6 +164,8 @@ Conference talks Slides and articles ------------------- +* `The Linux graphics stack in a nutshell, part 1 <https://lwn.net/Articles/955376/>`_ - Thomas Zimmermann (2023) +* `The Linux graphics stack in a nutshell, part 2 <https://lwn.net/Articles/955708/>`_ - Thomas Zimmermann (2023) * `Understanding the Linux Graphics Stack <https://bootlin.com/doc/training/graphics/graphics-slides.pdf>`_ - Bootlin (2022) * `DRM KMS overview <https://wiki.st.com/stm32mpu/wiki/DRM_KMS_overview>`_ - STMicroelectronics (2021) * `Linux graphic stack <https://studiopixl.com/2017-05-13/linux-graphic-stack-an-overview>`_ - Nathan Gauër (2017) diff --git a/Documentation/gpu/rfc/index.rst b/Documentation/gpu/rfc/index.rst index e4f7b005138d06..476719771eef38 100644 --- a/Documentation/gpu/rfc/index.rst +++ b/Documentation/gpu/rfc/index.rst @@ -31,7 +31,3 @@ host such documentation: .. toctree:: i915_vm_bind.rst - -.. toctree:: - - xe.rst diff --git a/Documentation/gpu/rfc/xe.rst b/Documentation/gpu/rfc/xe.rst deleted file mode 100644 index 97cf87578f973b..00000000000000 --- a/Documentation/gpu/rfc/xe.rst +++ /dev/null @@ -1,234 +0,0 @@ -========================== -Xe – Merge Acceptance Plan -========================== -Xe is a new driver for Intel GPUs that supports both integrated and -discrete platforms starting with Tiger Lake (first Intel Xe Architecture). - -This document aims to establish a merge plan for the Xe, by writing down clear -pre-merge goals, in order to avoid unnecessary delays. - -Xe – Overview -============= -The main motivation of Xe is to have a fresh base to work from that is -unencumbered by older platforms, whilst also taking the opportunity to -rearchitect our driver to increase sharing across the drm subsystem, both -leveraging and allowing us to contribute more towards other shared components -like TTM and drm/scheduler. - -This is also an opportunity to start from the beginning with a clean uAPI that is -extensible by design and already aligned with the modern userspace needs. For -this reason, the memory model is solely based on GPU Virtual Address space -bind/unbind (‘VM_BIND’) of GEM buffer objects (BOs) and execution only supporting -explicit synchronization. With persistent mapping across the execution, the -userspace does not need to provide a list of all required mappings during each -submission. - -The new driver leverages a lot from i915. As for display, the intent is to share -the display code with the i915 driver so that there is maximum reuse there. - -As for the power management area, the goal is to have a much-simplified support -for the system suspend states (S-states), PCI device suspend states (D-states), -GPU/Render suspend states (R-states) and frequency management. It should leverage -as much as possible all the existent PCI-subsystem infrastructure (pm and -runtime_pm) and underlying firmware components such PCODE and GuC for the power -states and frequency decisions. - -Repository: - -https://gitlab.freedesktop.org/drm/xe/kernel (branch drm-xe-next) - -Xe – Platforms -============== -Currently, Xe is already functional and has experimental support for multiple -platforms starting from Tiger Lake, with initial support in userspace implemented -in Mesa (for Iris and Anv, our OpenGL and Vulkan drivers), as well as in NEO -(for OpenCL and Level0). - -During a transition period, platforms will be supported by both Xe and i915. -However, the force_probe mechanism existent in both drivers will allow only one -official and by-default probe at a given time. - -For instance, in order to probe a DG2 which PCI ID is 0x5690 by Xe instead of -i915, the following set of parameters need to be used: - -``` -i915.force_probe=!5690 xe.force_probe=5690 -``` - -In both drivers, the ‘.require_force_probe’ protection forces the user to use the -force_probe parameter while the driver is under development. This protection is -only removed when the support for the platform and the uAPI are stable. Stability -which needs to be demonstrated by CI results. - -In order to avoid user space regressions, i915 will continue to support all the -current platforms that are already out of this protection. Xe support will be -forever experimental and dependent on the usage of force_probe for these -platforms. - -When the time comes for Xe, the protection will be lifted on Xe and kept in i915. - -Xe – Pre-Merge Goals - Work-in-Progress -======================================= - -Display integration with i915 ------------------------------ -In order to share the display code with the i915 driver so that there is maximum -reuse, the i915/display/ code is built twice, once for i915.ko and then for -xe.ko. Currently, the i915/display code in Xe tree is polluted with many 'ifdefs' -depending on the build target. The goal is to refactor both Xe and i915/display -code simultaneously in order to get a clean result before they land upstream, so -that display can already be part of the initial pull request towards drm-next. - -However, display code should not gate the acceptance of Xe in upstream. Xe -patches will be refactored in a way that display code can be removed, if needed, -from the first pull request of Xe towards drm-next. The expectation is that when -both drivers are part of the drm-tip, the introduction of cleaner patches will be -easier and speed up. - -Xe – uAPI high level overview -============================= - -...Warning: To be done in follow up patches after/when/where the main consensus in various items are individually reached. - -Xe – Pre-Merge Goals - Completed -================================ - -Drm_exec --------- -Helper to make dma_resv locking for a big number of buffers is getting removed in -the drm_exec series proposed in https://patchwork.freedesktop.org/patch/524376/ -If that happens, Xe needs to change and incorporate the changes in the driver. -The goal is to engage with the Community to understand if the best approach is to -move that to the drivers that are using it or if we should keep the helpers in -place waiting for Xe to get merged. - -This item ties into the GPUVA, VM_BIND, and even long-running compute support. - -As a key measurable result, we need to have a community consensus documented in -this document and the Xe driver prepared for the changes, if necessary. - -Userptr integration and vm_bind -------------------------------- -Different drivers implement different ways of dealing with execution of userptr. -With multiple drivers currently introducing support to VM_BIND, the goal is to -aim for a DRM consensus on what’s the best way to have that support. To some -extent this is already getting addressed itself with the GPUVA where likely the -userptr will be a GPUVA with a NULL GEM call VM bind directly on the userptr. -However, there are more aspects around the rules for that and the usage of -mmu_notifiers, locking and other aspects. - -This task here has the goal of introducing a documentation of the basic rules. - -The documentation *needs* to first live in this document (API session below) and -then moved to another more specific document or at Xe level or at DRM level. - -Documentation should include: - - * The userptr part of the VM_BIND api. - - * Locking, including the page-faulting case. - - * O(1) complexity under VM_BIND. - -The document is now included in the drm documentation :doc:`here </gpu/drm-vm-bind-async>`. - -Some parts of userptr like mmu_notifiers should become GPUVA or DRM helpers when -the second driver supporting VM_BIND+userptr appears. Details to be defined when -the time comes. - -The DRM GPUVM helpers do not yet include the userptr parts, but discussions -about implementing them are ongoing. - -ASYNC VM_BIND -------------- -Although having a common DRM level IOCTL for VM_BIND is not a requirement to get -Xe merged, it is mandatory to have a consensus with other drivers and Mesa. -It needs to be clear how to handle async VM_BIND and interactions with userspace -memory fences. Ideally with helper support so people don't get it wrong in all -possible ways. - -As a key measurable result, the benefits of ASYNC VM_BIND and a discussion of -various flavors, error handling and sample API suggestions are documented in -:doc:`The ASYNC VM_BIND document </gpu/drm-vm-bind-async>`. - -Drm_scheduler -------------- -Xe primarily uses Firmware based scheduling (GuC FW). However, it will use -drm_scheduler as the scheduler ‘frontend’ for userspace submission in order to -resolve syncobj and dma-buf implicit sync dependencies. However, drm_scheduler is -not yet prepared to handle the 1-to-1 relationship between drm_gpu_scheduler and -drm_sched_entity. - -Deeper changes to drm_scheduler should *not* be required to get Xe accepted, but -some consensus needs to be reached between Xe and other community drivers that -could also benefit from this work, for coupling FW based/assisted submission such -as the ARM’s new Mali GPU driver, and others. - -As a key measurable result, the patch series introducing Xe itself shall not -depend on any other patch touching drm_scheduler itself that was not yet merged -through drm-misc. This, by itself, already includes the reach of an agreement for -uniform 1 to 1 relationship implementation / usage across drivers. - -Long running compute: minimal data structure/scaffolding --------------------------------------------------------- -The generic scheduler code needs to include the handling of endless compute -contexts, with the minimal scaffolding for preempt-ctx fences (probably on the -drm_sched_entity) and making sure drm_scheduler can cope with the lack of job -completion fence. - -The goal is to achieve a consensus ahead of Xe initial pull-request, ideally with -this minimal drm/scheduler work, if needed, merged to drm-misc in a way that any -drm driver, including Xe, could re-use and add their own individual needs on top -in a next stage. However, this should not block the initial merge. - -Dev_coredump ------------- - -Xe needs to align with other drivers on the way that the error states are -dumped, avoiding a Xe only error_state solution. The goal is to use devcoredump -infrastructure to report error states, since it produces a standardized way -by exposing a virtual and temporary /sys/class/devcoredump device. - -As the key measurable result, Xe driver needs to provide GPU snapshots captured -at hang time through devcoredump, but without depending on any core modification -of devcoredump infrastructure itself. - -Later, when we are in-tree, the goal is to collaborate with devcoredump -infrastructure with overall possible improvements, like multiple file support -for better organization of the dumps, snapshot support, dmesg extra print, -and whatever may make sense and help the overall infrastructure. - -DRM_VM_BIND ------------ -Nouveau, and Xe are all implementing ‘VM_BIND’ and new ‘Exec’ uAPIs in order to -fulfill the needs of the modern uAPI. Xe merge should *not* be blocked on the -development of a common new drm_infrastructure. However, the Xe team needs to -engage with the community to explore the options of a common API. - -As a key measurable result, the DRM_VM_BIND needs to be documented in this file -below, or this entire block deleted if the consensus is for independent drivers -vm_bind ioctls. - -Although having a common DRM level IOCTL for VM_BIND is not a requirement to get -Xe merged, it is mandatory to enforce the overall locking scheme for all major -structs and list (so vm and vma). So, a consensus is needed, and possibly some -common helpers. If helpers are needed, they should be also documented in this -document. - -GPU VA ------- -Two main goals of Xe are meeting together here: - -1) Have an uAPI that aligns with modern UMD needs. - -2) Early upstream engagement. - -RedHat engineers working on Nouveau proposed a new DRM feature to handle keeping -track of GPU virtual address mappings. This is still not merged upstream, but -this aligns very well with our goals and with our VM_BIND. The engagement with -upstream and the port of Xe towards GPUVA is already ongoing. - -As a key measurable result, Xe needs to be aligned with the GPU VA and working in -our tree. Missing Nouveau patches should *not* block Xe and any needed GPUVA -related patch should be independent and present on dri-devel or acked by -maintainers to go along with the first Xe pull request towards drm-next. diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 41a264bf84ce02..fb9ad120b14147 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -120,6 +120,29 @@ Contact: Daniel Vetter, respective driver maintainers Level: Advanced +Rename drm_atomic_state +----------------------- + +The KMS framework uses two slightly different definitions for the ``state`` +concept. For a given object (plane, CRTC, encoder, etc., so +``drm_$OBJECT_state``), the state is the entire state of that object. However, +at the device level, ``drm_atomic_state`` refers to a state update for a +limited number of objects. + +The state isn't the entire device state, but only the full state of some +objects in that device. This is confusing to newcomers, and +``drm_atomic_state`` should be renamed to something clearer like +``drm_atomic_commit``. + +In addition to renaming the structure itself, it would also imply renaming some +related functions (``drm_atomic_state_alloc``, ``drm_atomic_state_get``, +``drm_atomic_state_put``, ``drm_atomic_state_init``, +``__drm_atomic_state_free``, etc.). + +Contact: Maxime Ripard <mripard@kernel.org> + +Level: Advanced + Fallout from atomic KMS ----------------------- diff --git a/Documentation/hwmon/aspeed-g6-pwm-tach.rst b/Documentation/hwmon/aspeed-g6-pwm-tach.rst new file mode 100644 index 00000000000000..17398fe397fe93 --- /dev/null +++ b/Documentation/hwmon/aspeed-g6-pwm-tach.rst @@ -0,0 +1,26 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver aspeed-g6-pwm-tach +================================= + +Supported chips: + ASPEED AST2600 + +Authors: + <billy_tsai@aspeedtech.com> + +Description: +------------ +This driver implements support for ASPEED AST2600 Fan Tacho controller. +The controller supports up to 16 tachometer inputs. + +The driver provides the following sensor accesses in sysfs: + +=============== ======= ====================================================== +fanX_input ro provide current fan rotation value in RPM as reported + by the fan to the device. +fanX_div rw Fan divisor: Supported value are power of 4 (1, 4, 16 + 64, ... 4194304) + The larger divisor, the less rpm accuracy and the less + affected by fan signal glitch. +=============== ======= ====================================================== diff --git a/Documentation/hwmon/asus_rog_ryujin.rst b/Documentation/hwmon/asus_rog_ryujin.rst new file mode 100644 index 00000000000000..9f77da07002218 --- /dev/null +++ b/Documentation/hwmon/asus_rog_ryujin.rst @@ -0,0 +1,47 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver asus_rog_ryujin +============================= + +Supported devices: + +* ASUS ROG RYUJIN II 360 + +Author: Aleksa Savic + +Description +----------- + +This driver enables hardware monitoring support for the listed ASUS ROG RYUJIN +all-in-one CPU liquid coolers. Available sensors are pump, internal and external +(controller) fan speed in RPM, their duties in PWM, as well as coolant temperature. + +Attaching external fans to the controller is optional and allows them to be +controlled from the device. If not connected, the fan-related sensors will +report zeroes. The controller is a separate hardware unit that comes bundled +with the AIO and connects to it to allow fan control. + +The addressable LCD screen is not supported in this driver and should +be controlled through userspace tools. + +Usage notes +----------- + +As these are USB HIDs, the driver can be loaded automatically by the kernel and +supports hot swapping. + +Sysfs entries +------------- + +=========== ============================================= +fan1_input Pump speed (in rpm) +fan2_input Internal fan speed (in rpm) +fan3_input External (controller) fan 1 speed (in rpm) +fan4_input External (controller) fan 2 speed (in rpm) +fan5_input External (controller) fan 3 speed (in rpm) +fan6_input External (controller) fan 4 speed (in rpm) +temp1_input Coolant temperature (in millidegrees Celsius) +pwm1 Pump duty +pwm2 Internal fan duty +pwm3 External (controller) fan duty +=========== ============================================= diff --git a/Documentation/hwmon/chipcap2.rst b/Documentation/hwmon/chipcap2.rst new file mode 100644 index 00000000000000..dc165becc64cff --- /dev/null +++ b/Documentation/hwmon/chipcap2.rst @@ -0,0 +1,73 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver ChipCap2 +====================== + +Supported chips: + + * Amphenol CC2D23, CC2D23S, CC2D25, CC2D25S, CC2D33, CC2D33S, CC2D35, CC2D35S + + Prefix: 'chipcap2' + + Addresses scanned: - + + Datasheet: https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2 + +Author: + + - Javier Carrasco <javier.carrasco.cruz@gmail.com> + +Description +----------- + +This driver implements support for the Amphenol ChipCap 2, a humidity and +temperature chip family. Temperature is measured in milli degrees celsius, +relative humidity is expressed as a per cent mille. The measurement ranges +are the following: + + - Relative humidity: 0 to 100000 pcm (14-bit resolution) + - Temperature: -40000 to +125000 m°C (14-bit resolution) + +The device communicates with the I2C protocol and uses the I2C address 0x28 +by default. + +Depending on the hardware configuration, up to two humidity alarms to control +minimum and maximum values are provided. Their thresholds and hystersis can be +configured via sysfs. + +Thresholds and hysteris must be provided as a per cent mille. These values +might be truncated to match the 14-bit device resolution (6.1 pcm/LSB) + +Known Issues +------------ + +The driver does not support I2C address and command window length modification. + +sysfs-Interface +--------------- + +The following list includes the sysfs attributes that the driver always provides, +their permissions and a short description: + +=============================== ======= ======================================== +Name Perm Description +=============================== ======= ======================================== +temp1_input: RO temperature input +humidity1_input: RO humidity input +=============================== ======= ======================================== + +The following list includes the sysfs attributes that the driver may provide +depending on the hardware configuration: + +=============================== ======= ======================================== +Name Perm Description +=============================== ======= ======================================== +humidity1_min: RW humidity low limit. Measurements under + this limit trigger a humidity low alarm +humidity1_max: RW humidity high limit. Measurements above + this limit trigger a humidity high alarm +humidity1_min_hyst: RW humidity low hystersis +humidity1_max_hyst: RW humidity high hystersis +humidity1_min_alarm: RO humidity low alarm indicator +humidity1_max_alarm: RO humidity high alarm indicator +=============================== ======= ======================================== diff --git a/Documentation/hwmon/emc2305.rst b/Documentation/hwmon/emc2305.rst index 2403dbaf272891..d0bfffe463587b 100644 --- a/Documentation/hwmon/emc2305.rst +++ b/Documentation/hwmon/emc2305.rst @@ -6,7 +6,6 @@ Kernel driver emc2305 Supported chips: Microchip EMC2305, EMC2303, EMC2302, EMC2301 - Addresses scanned: I2C 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d Prefixes: 'emc2305' Datasheet: Publicly available at the Microchip website : diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index c7ed1f73ac0661..1ca7a4fe1f8f57 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -44,13 +44,16 @@ Hardware Monitoring Kernel Drivers aquacomputer_d5next asb100 asc7621 + aspeed-g6-pwm-tach aspeed-pwm-tacho asus_ec_sensors + asus_rog_ryujin asus_wmi_sensors bcm54140 bel-pfe bpa-rs600 bt1-pvt + chipcap2 coretemp corsair-cpro corsair-psu @@ -129,6 +132,7 @@ Hardware Monitoring Kernel Drivers ltc4245 ltc4260 ltc4261 + ltc4282 ltc4286 max127 max15301 @@ -163,6 +167,7 @@ Hardware Monitoring Kernel Drivers mp2975 mp5023 mp5990 + mpq8785 nct6683 nct6775 nct7802 @@ -171,6 +176,7 @@ Hardware Monitoring Kernel Drivers nsa320 ntc_thermistor nzxt-kraken2 + nzxt-kraken3 nzxt-smart2 occ oxp-sensors @@ -185,6 +191,7 @@ Hardware Monitoring Kernel Drivers pmbus powerz powr1220 + pt5161l pxe1610 pwm-fan q54sj108a2 @@ -208,6 +215,7 @@ Hardware Monitoring Kernel Drivers smsc47m1 sparx5-temp stpddc60 + surface_fan sy7636a-hwmon tc654 tc74 diff --git a/Documentation/hwmon/ltc4282.rst b/Documentation/hwmon/ltc4282.rst new file mode 100644 index 00000000000000..a87ec3564998fe --- /dev/null +++ b/Documentation/hwmon/ltc4282.rst @@ -0,0 +1,133 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel drivers ltc4282 +========================================== + +Supported chips: + + * Analog Devices LTC4282 + + Prefix: 'ltc4282' + + Addresses scanned: - I2C 0x40 - 0x5A (7-bit) + Addresses scanned: - I2C 0x80 - 0xB4 with a step of 2 (8-bit) + + Datasheet: + + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf + +Author: Nuno Sá <nuno.sa@analog.com> + +Description +___________ + +The LTC4282 hot swap controller allows a board to be safely inserted and removed +from a live backplane. Using one or more external N-channel pass transistors, +board supply voltage and inrush current are ramped up at an adjustable rate. An +I2C interface and onboard ADC allows for monitoring of board current, voltage, +power, energy and fault status. The device features analog foldback current +limiting and supply monitoring for applications from 2.9V to 33V. Dual 12V gate +drive allows high power applications to either share safe operating area across +parallel MOSFETs or support a 2-stage start-up that first charges the load +capacitance followed by enabling a low on-resistance path to the load. The +LTC4282 is well suited to high power applications because the precise monitoring +capability and accurate current limiting reduce the extremes in which both loads +and power supplies must safely operate. Non-volatile configuration allows for +flexibility in the autonomous generation of alerts and response to faults. + +Sysfs entries +_____________ + +The following attributes are supported. Limits are read-write and all the other +attributes are read-only. Note that in0 and in1 are mutually exclusive. Enabling +one disables the other and disabling one enables the other. + +======================= ========================================== +in0_input Output voltage (mV). +in0_min Undervoltage threshold +in0_max Overvoltage threshold +in0_lowest Lowest measured voltage +in0_highest Highest measured voltage +in0_reset_history Write 1 to reset in0 history. + Also clears fet bad and short fault logs. +in0_min_alarm Undervoltage alarm +in0_max_alarm Overvoltage alarm +in0_enable Enable/Disable VSOURCE monitoring +in0_fault Failure in the MOSFETs. Either bad or shorted FET. +in0_label Channel label (VSOURCE) + +in1_input Input voltage (mV). +in1_min Undervoltage threshold +in1_max Overvoltage threshold +in1_lowest Lowest measured voltage +in1_highest Highest measured voltage +in1_reset_history Write 1 to reset in1 history. + Also clears over/undervoltage fault logs. +in1_min_alarm Undervoltage alarm +in1_max_alarm Overvoltage alarm +in1_lcrit_alarm Critical Undervoltage alarm +in1_crit_alarm Critical Overvoltage alarm +in1_enable Enable/Disable VDD monitoring +in1_label Channel label (VDD) + +in2_input GPIO voltage (mV) +in2_min Undervoltage threshold +in2_max Overvoltage threshold +in2_lowest Lowest measured voltage +in2_highest Highest measured voltage +in2_reset_history Write 1 to reset in2 history +in2_min_alarm Undervoltage alarm +in2_max_alarm Overvoltage alarm +in2_label Channel label (VGPIO) + +curr1_input Sense current (mA) +curr1_min Undercurrent threshold +curr1_max Overcurrent threshold +curr1_lowest Lowest measured current +curr1_highest Highest measured current +curr1_reset_history Write 1 to reset curr1 history. + Also clears overcurrent fault logs. +curr1_min_alarm Undercurrent alarm +curr1_max_alarm Overcurrent alarm +curr1_crit_alarm Critical Overcurrent alarm +curr1_label Channel label (ISENSE) + +power1_input Power (in uW) +power1_min Low power threshold +power1_max High power threshold +power1_input_lowest Historical minimum power use +power1_input_highest Historical maximum power use +power1_reset_history Write 1 to reset power1 history. + Also clears power bad fault logs. +power1_min_alarm Low power alarm +power1_max_alarm High power alarm +power1_label Channel label (Power) + +energy1_input Measured energy over time (in microJoule) +energy1_enable Enable/Disable Energy accumulation +======================= ========================================== + +DebugFs entries +_______________ + +The chip also has a fault log register where failures can be logged. Hence, +as these are logging events, we give access to them in debugfs. Note that +even if some failure is detected in these logs, it does necessarily mean +that the failure is still present. As mentioned in the proper Sysfs entries, +these logs can be cleared by writing in the proper reset_history attribute. + +.. warning:: The debugfs interface is subject to change without notice + and is only available when the kernel is compiled with + ``CONFIG_DEBUG_FS`` defined. + +``/sys/kernel/debug/ltc4282-hwmon[X]/`` +contains the following attributes: + +======================= ========================================== +power1_bad_fault_log Set to 1 by a power1 bad fault occurring. +in0_fet_short_fault_log Set to 1 when the ADC detects a FET-short fault. +in0_fet_bad_fault_log Set to 1 when a FET-BAD fault occurs. +in1_crit_fault_log Set to 1 by a VDD overvoltage fault occurring. +in1_lcrit_fault_log Set to 1 by a VDD undervoltage fault occurring. +curr1_crit_fault_log Set to 1 by an overcurrent fault occurring. +======================= ========================================== diff --git a/Documentation/hwmon/max6620.rst b/Documentation/hwmon/max6620.rst index 84c1c44d3de4de..d70173bf0242c1 100644 --- a/Documentation/hwmon/max6620.rst +++ b/Documentation/hwmon/max6620.rst @@ -11,7 +11,7 @@ Supported chips: Addresses scanned: none - Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6620.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6620.pdf Authors: - L\. Grunenberg <contact@lgrunenberg.de> diff --git a/Documentation/hwmon/mpq8785.rst b/Documentation/hwmon/mpq8785.rst new file mode 100644 index 00000000000000..bf8176b8708687 --- /dev/null +++ b/Documentation/hwmon/mpq8785.rst @@ -0,0 +1,94 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver mpq8785 +======================= + +Supported chips: + + * MPS MPQ8785 + + Prefix: 'mpq8785' + +Author: Charles Hsu <ythsu0511@gmail.com> + +Description +----------- + +The MPQ8785 is a fully integrated, PMBus-compatible, high-frequency, synchronous +buck converter. The MPQ8785 offers a very compact solution that achieves up to +40A output current per phase, with excellent load and line regulation over a +wide input supply range. The MPQ8785 operates at high efficiency over a wide +output current load range. + +The PMBus interface provides converter configurations and key parameters +monitoring. + +The MPQ8785 adopts MPS's proprietary multi-phase digital constant-on-time (MCOT) +control, which provides fast transient response and eases loop stabilization. +The MCOT scheme also allows multiple MPQ8785 devices to be connected in parallel +with excellent current sharing and phase interleaving for high-current +applications. + +Fully integrated protection features include over-current protection (OCP), +over-voltage protection (OVP), under-voltage protection (UVP), and +over-temperature protection (OTP). + +The MPQ8785 requires a minimal number of readily available, standard external +components, and is available in a TLGA (5mmx6mm) package. + +Device compliant with: + +- PMBus rev 1.3 interface. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_max** + +**in1_max_alarm** + +**in1_min** + +**in1_min_alarm** + +**in1_crit** + +**in1_crit_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_alarm** + +The driver provides the following attributes for output current: + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +**curr1_crit** + +**curr1_crit_alarm** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_max** + +**temp1_max_alarm** + +**temp1_crit** + +**temp1_crit_alarm** diff --git a/Documentation/hwmon/nct6683.rst b/Documentation/hwmon/nct6683.rst index 3e7f6ee779c2f9..2a7a78eb1b4688 100644 --- a/Documentation/hwmon/nct6683.rst +++ b/Documentation/hwmon/nct6683.rst @@ -64,4 +64,5 @@ Intel DB85FL NCT6683D EC firmware version 1.0 build 04/03/13 ASRock X570 NCT6683D EC firmware version 1.0 build 06/28/19 ASRock X670E NCT6686D EC firmware version 1.0 build 05/19/22 MSI B550 NCT6687D EC firmware version 1.0 build 05/07/20 +MSI X670-P NCT6687D EC firmware version 0.0 build 09/27/22 =============== =============================================== diff --git a/Documentation/hwmon/nzxt-kraken3.rst b/Documentation/hwmon/nzxt-kraken3.rst new file mode 100644 index 00000000000000..90fd9dec15ff22 --- /dev/null +++ b/Documentation/hwmon/nzxt-kraken3.rst @@ -0,0 +1,74 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver nzxt-kraken3 +========================== + +Supported devices: + +* NZXT Kraken X53 +* NZXT Kraken X63 +* NZXT Kraken X73 +* NZXT Kraken Z53 +* NZXT Kraken Z63 +* NZXT Kraken Z73 + +Author: Jonas Malaco, Aleksa Savic + +Description +----------- + +This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73 and +Z53/Z63/Z73 all-in-one CPU liquid coolers. All models expose liquid temperature +and pump speed (in RPM), as well as PWM control (either as a fixed value +or through a temp-PWM curve). The Z-series models additionally expose the speed +and duty of an optionally connected fan, with the same PWM control capabilities. + +Pump and fan duty control mode can be set through pwm[1-2]_enable, where 1 is +for the manual control mode and 2 is for the liquid temp to PWM curve mode. +Writing a 0 disables control of the channel through the driver after setting its +duty to 100%. + +The temperature of the curves relates to the fixed [20-59] range, correlating to +the detected liquid temperature. Only PWM values (ranging from 0-255) can be set. +If in curve mode, setting point values should be done in moderation - the devices +require complete curves to be sent for each change; they can lock up or discard +the changes if they are too numerous at once. Suggestion is to set them while +in an another mode, and then apply them by switching to curve. + +The devices can report if they are faulty. The driver supports that situation +and will issue a warning. This can also happen when the USB cable is connected, +but SATA power is not. + +The addressable RGB LEDs and LCD screen (only on Z-series models) are not +supported in this driver, but can be controlled through existing userspace tools, +such as `liquidctl`_. + +.. _liquidctl: https://github.com/liquidctl/liquidctl + +Usage Notes +----------- + +As these are USB HIDs, the driver can be loaded automatically by the kernel and +supports hot swapping. + +Possible pwm_enable values are: + +====== ========================================================================== +0 Set fan to 100% +1 Direct PWM mode (applies value in corresponding PWM entry) +2 Curve control mode (applies the temp-PWM duty curve based on coolant temp) +====== ========================================================================== + +Sysfs entries +------------- + +============================== ================================================================ +fan1_input Pump speed (in rpm) +fan2_input Fan speed (in rpm) +temp1_input Coolant temperature (in millidegrees Celsius) +pwm1 Pump duty (value between 0-255) +pwm1_enable Pump duty control mode (0: disabled, 1: manual, 2: curve) +pwm2 Fan duty (value between 0-255) +pwm2_enable Fan duty control mode (0: disabled, 1: manual, 2: curve) +temp[1-2]_auto_point[1-40]_pwm Temp-PWM duty curves (for pump and fan), related to coolant temp +============================== ================================================================ diff --git a/Documentation/hwmon/oxp-sensors.rst b/Documentation/hwmon/oxp-sensors.rst index 3adeb7406243fb..55b1ef61625ebc 100644 --- a/Documentation/hwmon/oxp-sensors.rst +++ b/Documentation/hwmon/oxp-sensors.rst @@ -33,6 +33,7 @@ Currently the driver supports the following handhelds: - AOK ZOE A1 PRO - Aya Neo 2 - Aya Neo AIR + - Aya Neo AIR Plus (Mendocino) - Aya Neo AIR Pro - Aya Neo Geek - OneXPlayer AMD diff --git a/Documentation/hwmon/pt5161l.rst b/Documentation/hwmon/pt5161l.rst new file mode 100644 index 00000000000000..1b97336991ea5f --- /dev/null +++ b/Documentation/hwmon/pt5161l.rst @@ -0,0 +1,42 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver pt5161l +===================== + +Supported chips: + + * Astera Labs PT5161L + + Prefix: 'pt5161l' + + Addresses scanned: I2C 0x20 - 0x27 + + Datasheet: Not publicly available. + +Authors: Cosmo Chou <cosmo.chou@quantatw.com> + +Description +----------- + +This driver implements support for temperature monitoring of Astera Labs +PT5161L series PCIe retimer chips. + +This driver implementation originates from the CSDK available at +https://github.com/facebook/openbmc/tree/helium/common/recipes-lib/retimer-v2.14 +The communication protocol utilized is based on the I2C/SMBus standard. + +Sysfs entries +---------------- + +================ ============================================== +temp1_input Measured temperature (in millidegrees Celsius) +================ ============================================== + +Debugfs entries +---------------- + +================ =============================== +fw_load_status Firmware load status +fw_ver Firmware version of the retimer +heartbeat_status Heartbeat status +================ =============================== diff --git a/Documentation/hwmon/sht3x.rst b/Documentation/hwmon/sht3x.rst index 957c854f5d088c..9585fa7c5a5d87 100644 --- a/Documentation/hwmon/sht3x.rst +++ b/Documentation/hwmon/sht3x.rst @@ -65,6 +65,10 @@ When the temperature and humidity readings move back between the hysteresis values, the alert bit is set to 0 and the alert pin on the sensor is set to low. +The serial number exposed to debugfs allows for unique identification of the +sensors. For sts32, sts33 and sht33, the manufacturer provides calibration +certificates through an API. + sysfs-Interface --------------- @@ -99,3 +103,10 @@ repeatability: write or read repeatability, higher repeatability means - 1: medium repeatability - 2: high repeatability =================== ============================================================ + +debugfs-Interface +----------------- + +=================== ============================================================ +serial_number: unique serial number of the sensor in decimal +=================== ============================================================ diff --git a/Documentation/hwmon/surface_fan.rst b/Documentation/hwmon/surface_fan.rst new file mode 100644 index 00000000000000..07942574c4f0cf --- /dev/null +++ b/Documentation/hwmon/surface_fan.rst @@ -0,0 +1,25 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver surface_fan +========================= + +Supported Devices: + + * Microsoft Surface Pro 9 + +Author: Ivor Wanders <ivor@iwanders.net> + +Description +----------- + +This provides monitoring of the fan found in some Microsoft Surface Pro devices, +like the Surface Pro 9. The fan is always controlled by the onboard controller. + +Sysfs interface +--------------- + +======================= ======= ========================================= +Name Perm Description +======================= ======= ========================================= +``fan1_input`` RO Current fan speed in RPM. +======================= ======= ========================================= diff --git a/Documentation/i2c/writing-clients.rst b/Documentation/i2c/writing-clients.rst index 41ddc10f1ac7b5..0b8439ea954ccd 100644 --- a/Documentation/i2c/writing-clients.rst +++ b/Documentation/i2c/writing-clients.rst @@ -48,10 +48,6 @@ driver model device node, and its I2C address. .id_table = foo_idtable, .probe = foo_probe, .remove = foo_remove, - /* if device autodetection is needed: */ - .class = I2C_CLASS_SOMETHING, - .detect = foo_detect, - .address_list = normal_i2c, .shutdown = foo_shutdown, /* optional */ .command = foo_command, /* optional, deprecated */ @@ -203,27 +199,8 @@ reference for later use. Device Detection ---------------- -Sometimes you do not know in advance which I2C devices are connected to -a given I2C bus. This is for example the case of hardware monitoring -devices on a PC's SMBus. In that case, you may want to let your driver -detect supported devices automatically. This is how the legacy model -was working, and is now available as an extension to the standard -driver model. - -You simply have to define a detect callback which will attempt to -identify supported devices (returning 0 for supported ones and -ENODEV -for unsupported ones), a list of addresses to probe, and a device type -(or class) so that only I2C buses which may have that type of device -connected (and not otherwise enumerated) will be probed. For example, -a driver for a hardware monitoring chip for which auto-detection is -needed would set its class to I2C_CLASS_HWMON, and only I2C adapters -with a class including I2C_CLASS_HWMON would be probed by this driver. -Note that the absence of matching classes does not prevent the use of -a device of that type on the given I2C adapter. All it prevents is -auto-detection; explicit instantiation of devices is still possible. - -Note that this mechanism is purely optional and not suitable for all -devices. You need some reliable way to identify the supported devices +The device detection mechanism comes with a number of disadvantages. +You need some reliable way to identify the supported devices (typically using device-specific, dedicated identification registers), otherwise misdetections are likely to occur and things can get wrong quickly. Keep in mind that the I2C protocol doesn't include any @@ -231,9 +208,8 @@ standard way to detect the presence of a chip at a given address, let alone a standard way to identify devices. Even worse is the lack of semantics associated to bus transfers, which means that the same transfer can be seen as a read operation by a chip and as a write -operation by another chip. For these reasons, explicit device -instantiation should always be preferred to auto-detection where -possible. +operation by another chip. For these reasons, device detection is +considered a legacy mechanism and shouldn't be used in new code. Device Deletion diff --git a/Documentation/iio/adis16475.rst b/Documentation/iio/adis16475.rst new file mode 100644 index 00000000000000..91cabb7d8d057c --- /dev/null +++ b/Documentation/iio/adis16475.rst @@ -0,0 +1,407 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================ +ADIS16475 driver +================ + +This driver supports Analog Device's IMUs on SPI bus. + +1. Supported devices +==================== + +* `ADIS16465 <https://www.analog.com/ADIS16465>`_ +* `ADIS16467 <https://www.analog.com/ADIS16467>`_ +* `ADIS16470 <https://www.analog.com/ADIS16470>`_ +* `ADIS16475 <https://www.analog.com/ADIS16475>`_ +* `ADIS16477 <https://www.analog.com/ADIS16477>`_ +* `ADIS16500 <https://www.analog.com/ADIS16500>`_ +* `ADIS16505 <https://www.analog.com/ADIS16505>`_ +* `ADIS16507 <https://www.analog.com/ADIS16507>`_ + +Each supported device is a precision, miniature microelectromechanical system +(MEMS) inertial measurement unit (IMU) that includes a triaxial gyroscope and a +triaxial accelerometer. Each inertial sensor in the IMU device combines with +signal conditioning that optimizes dynamic performance. The factory calibration +characterizes each sensor for sensitivity, bias, alignment, linear acceleration +(gyroscope bias), and point of percussion (accelerometer location). As a result, +each sensor has dynamic compensation formulas that provide accurate sensor +measurements over a broad set of conditions. + +2. Device attributes +==================== + +Accelerometer, gyroscope measurements are always provided. Furthermore, the +driver offers the capability to retrieve the delta angle and the delta velocity +measurements computed by the device. + +The delta angle measurements represent a calculation of angular displacement +between each sample update, while the delta velocity measurements represent a +calculation of linear velocity change between each sample update. + +Finally, temperature data are provided which show a coarse measurement of +the temperature inside of the IMU device. This data is most useful for +monitoring relative changes in the thermal environment. + +The signal chain of each inertial sensor (accelerometers and gyroscopes) +includes the application of unique correction formulas, which are derived from +extensive characterization of bias, sensitivity, alignment, response to linear +acceleration (gyroscopes), and point of percussion (accelerometer location) +over a temperature range of −40°C to +85°C, for each ADIS device. These +correction formulas are not accessible, but users do have the opportunity to +adjust the bias for each sensor individually through the calibbias attribute. + +Each IIO device, has a device folder under ``/sys/bus/iio/devices/iio:deviceX``, +where X is the IIO index of the device. Under these folders reside a set of +device files, depending on the characteristics and features of the hardware +device in questions. These files are consistently generalized and documented in +the IIO ABI documentation. + +The following tables show the adis16475 related device files, found in the +specific device folder path ``/sys/bus/iio/devices/iio:deviceX``. + ++-------------------------------------------+----------------------------------------------------------+ +| 3-Axis Accelerometer related device files | Description | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_scale | Scale for the accelerometer channels. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_x_calibbias | Calibration offset for the X-axis accelerometer channel. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_calibbias_x | x-axis acceleration offset correction | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_x_raw | Raw X-axis accelerometer channel value. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_calibbias_y | y-axis acceleration offset correction | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_y_raw | Raw Y-axis accelerometer channel value. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_z_calibbias | Calibration offset for the Z-axis accelerometer channel. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_z_raw | Raw Z-axis accelerometer channel value. | ++-------------------------------------------+----------------------------------------------------------+ +| in_deltavelocity_scale | Scale for delta velocity channels. | ++-------------------------------------------+----------------------------------------------------------+ +| in_deltavelocity_x_raw | Raw X-axis delta velocity channel value. | ++-------------------------------------------+----------------------------------------------------------+ +| in_deltavelocity_y_raw | Raw Y-axis delta velocity channel value. | ++-------------------------------------------+----------------------------------------------------------+ +| in_deltavelocity_z_raw | Raw Z-axis delta velocity channel value. | ++-------------------------------------------+----------------------------------------------------------+ + ++---------------------------------------+------------------------------------------------------+ +| 3-Axis Gyroscope related device files | Description | ++---------------------------------------+------------------------------------------------------+ +| in_anglvel_scale | Scale for the gyroscope channels. | ++---------------------------------------+------------------------------------------------------+ +| in_anglvel_x_calibbias | Calibration offset for the X-axis gyroscope channel. | ++---------------------------------------+------------------------------------------------------+ +| in_anglvel_calibbias_x | x-axis gyroscope offset correction | ++---------------------------------------+------------------------------------------------------+ +| in_anglvel_x_raw | Raw X-axis gyroscope channel value. | ++---------------------------------------+------------------------------------------------------+ +| in_anglvel_calibbias_y | y-axis gyroscope offset correction | ++---------------------------------------+------------------------------------------------------+ +| in_anglvel_y_raw | Raw Y-axis gyroscope channel value. | ++---------------------------------------+------------------------------------------------------+ +| in_anglvel_z_calibbias | Calibration offset for the Z-axis gyroscope channel. | ++---------------------------------------+------------------------------------------------------+ +| in_anglvel_z_raw | Raw Z-axis gyroscope channel value. | ++---------------------------------------+------------------------------------------------------+ +| in_deltaangl_scale | Scale for delta angle channels. | ++---------------------------------------+------------------------------------------------------+ +| in_deltaangl_x_raw | Raw X-axis delta angle channel value. | ++---------------------------------------+------------------------------------------------------+ +| in_deltaangl_y_raw | Raw Y-axis delta angle channel value. | ++---------------------------------------+------------------------------------------------------+ +| in_deltaangl_z_raw | Raw Z-axis delta angle channel value. | ++---------------------------------------+------------------------------------------------------+ + ++----------------------------------+-------------------------------------------+ +| Temperature sensor related files | Description | ++----------------------------------+-------------------------------------------+ +| in_temp0_raw | Raw temperature channel value. | ++----------------------------------+-------------------------------------------+ +| in_temp0_scale | Scale for the temperature sensor channel. | ++----------------------------------+-------------------------------------------+ + ++-------------------------------+---------------------------------------------------------+ +| Miscellaneous device files | Description | ++-------------------------------+---------------------------------------------------------+ +| name | Name of the IIO device. | ++-------------------------------+---------------------------------------------------------+ +| sampling_frequency | Currently selected sample rate. | ++-------------------------------+---------------------------------------------------------+ +| filter_low_pass_3db_frequency | Bandwidth for the accelerometer and gyroscope channels. | ++-------------------------------+---------------------------------------------------------+ + +The following table shows the adis16475 related device debug files, found in the +specific device debug folder path ``/sys/kernel/debug/iio/iio:deviceX``. + ++----------------------+-------------------------------------------------------------------------+ +| Debugfs device files | Description | ++----------------------+-------------------------------------------------------------------------+ +| serial_number | The serial number of the chip in hexadecimal format. | ++----------------------+-------------------------------------------------------------------------+ +| product_id | Chip specific product id (e.g. 16475, 16500, 16505, etc.). | ++----------------------+-------------------------------------------------------------------------+ +| flash_count | The number of flash writes performed on the device. | ++----------------------+-------------------------------------------------------------------------+ +| firmware_revision | String containing the firmware revision in the following format ##.##. | ++----------------------+-------------------------------------------------------------------------+ +| firmware_date | String containing the firmware date in the following format mm-dd-yyyy. | ++----------------------+-------------------------------------------------------------------------+ + +Channels processed values +------------------------- + +A channel value can be read from its _raw attribute. The value returned is the +raw value as reported by the devices. To get the processed value of the channel, +apply the following formula: + +.. code-block:: bash + + processed value = (_raw + _offset) * _scale + +Where _offset and _scale are device attributes. If no _offset attribute is +present, simply assume its value is 0. + +The adis16475 driver offers data for 5 types of channels, the table below shows +the measurement units for the processed value, which are defined by the IIO +framework: + ++-------------------------------------+---------------------------+ +| Channel type | Measurement unit | ++-------------------------------------+---------------------------+ +| Acceleration on X, Y, and Z axis | Meters per Second squared | ++-------------------------------------+---------------------------+ +| Angular velocity on X, Y and Z axis | Radians per second | ++-------------------------------------+---------------------------+ +| Delta velocity on X. Y, and Z axis | Meters per Second | ++-------------------------------------+---------------------------+ +| Delta angle on X, Y, and Z axis | Radians | ++-------------------------------------+---------------------------+ +| Temperature | Millidegrees Celsius | ++-------------------------------------+---------------------------+ + +Usage examples +-------------- + +Show device name: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat name + adis16505-2 + +Show accelerometer channels value: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_raw + -275924 + root:/sys/bus/iio/devices/iio:device0> cat in_accel_y_raw + -30142222 + root:/sys/bus/iio/devices/iio:device0> cat in_accel_z_raw + 261265769 + root:/sys/bus/iio/devices/iio:device0> cat in_accel_scale + 0.000000037 + +- X-axis acceleration = in_accel_x_raw * in_accel_scale = −0.010209188 m/s^2 +- Y-axis acceleration = in_accel_y_raw * in_accel_scale = −1.115262214 m/s^2 +- Z-axis acceleration = in_accel_z_raw * in_accel_scale = 9.666833453 m/s^2 + +Show gyroscope channels value: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_x_raw + -3324626 + root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_raw + 1336980 + root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_z_raw + -602983 + root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_scale + 0.000000006 + +- X-axis angular velocity = in_anglvel_x_raw * in_anglvel_scale = −0.019947756 rad/s +- Y-axis angular velocity = in_anglvel_y_raw * in_anglvel_scale = 0.00802188 rad/s +- Z-axis angular velocity = in_anglvel_z_raw * in_anglvel_scale = −0.003617898 rad/s + +Set calibration offset for accelerometer channels: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias + 0 + + root:/sys/bus/iio/devices/iio:device0> echo 5000 > in_accel_x_calibbias + root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias + 5000 + +Set calibration offset for gyroscope channels: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_calibbias + 0 + + root:/sys/bus/iio/devices/iio:device0> echo -5000 > in_anglvel_y_calibbias + root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_calibbias + -5000 + +Set sampling frequency: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat sampling_frequency + 2000.000000 + + root:/sys/bus/iio/devices/iio:device0> echo 1000 > sampling_frequency + 1000.000000 + +Set bandwidth for accelerometer and gyroscope: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat filter_low_pass_3db_frequency + 720 + + root:/sys/bus/iio/devices/iio:device0> echo 360 > filter_low_pass_3db_frequency + root:/sys/bus/iio/devices/iio:device0> cat filter_low_pass_3db_frequency + 360 + +Show serial number: + +.. code-block:: bash + + root:/sys/kernel/debug/iio/iio:device0> cat serial_number + 0x04f9 + +Show product id: + +.. code-block:: bash + + root:/sys/kernel/debug/iio/iio:device0> cat product_id + 16505 + +Show flash count: + +.. code-block:: bash + + root:/sys/kernel/debug/iio/iio:device0> cat flash_count + 150 + +Show firmware revision: + +.. code-block:: bash + + root:/sys/kernel/debug/iio/iio:device0> cat firmware_revision + 1.6 + +Show firmware date: + +.. code-block:: bash + + root:/sys/kernel/debug/iio/iio:device0> cat firmware_date + 06-27-2019 + +3. Device buffers +================= + +This driver supports IIO buffers. + +All devices support retrieving the raw acceleration, gyroscope and temperature +measurements using buffers. + +The following device families also support retrieving the delta velocity, delta +angle and temperature measurements using buffers: + +- ADIS16477 +- ADIS16500 +- ADIS16505 +- ADIS16507 + +However, when retrieving acceleration or gyroscope data using buffers, delta +readings will not be available and vice versa. + +Usage examples +-------------- + +Set device trigger in current_trigger, if not already set: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat trigger/current_trigger + + root:/sys/bus/iio/devices/iio:device0> echo adis16505-2-dev0 > trigger/current_trigger + root:/sys/bus/iio/devices/iio:device0> cat trigger/current_trigger + adis16505-2-dev0 + +Select channels for buffer read: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_x_en + root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_y_en + root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_z_en + root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_temp0_en + +Set the number of samples to be stored in the buffer: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 10 > buffer/length + +Enable buffer readings: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 1 > buffer/enable + +Obtain buffered data: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> hexdump -C /dev/iio\:device0 + ... + 00001680 01 1f 00 00 ff ff fe ef 00 00 47 bf 00 03 35 55 |..........G...5U| + 00001690 01 1f 00 00 ff ff ff d9 00 00 46 f1 00 03 35 35 |..........F...55| + 000016a0 01 1f 00 00 ff ff fe fc 00 00 46 cb 00 03 35 7b |..........F...5{| + 000016b0 01 1f 00 00 ff ff fe 41 00 00 47 0d 00 03 35 8b |.......A..G...5.| + 000016c0 01 1f 00 00 ff ff fe 37 00 00 46 b4 00 03 35 90 |.......7..F...5.| + 000016d0 01 1d 00 00 ff ff fe 5a 00 00 45 d7 00 03 36 08 |.......Z..E...6.| + 000016e0 01 1b 00 00 ff ff fe fb 00 00 45 e7 00 03 36 60 |..........E...6`| + 000016f0 01 1a 00 00 ff ff ff 17 00 00 46 bc 00 03 36 de |..........F...6.| + 00001700 01 1a 00 00 ff ff fe 59 00 00 46 d7 00 03 37 b8 |.......Y..F...7.| + 00001710 01 1a 00 00 ff ff fe ae 00 00 46 95 00 03 37 ba |..........F...7.| + 00001720 01 1a 00 00 ff ff fe c5 00 00 46 63 00 03 37 9f |..........Fc..7.| + 00001730 01 1a 00 00 ff ff fe 55 00 00 46 89 00 03 37 c1 |.......U..F...7.| + 00001740 01 1a 00 00 ff ff fe 31 00 00 46 aa 00 03 37 f7 |.......1..F...7.| + ... + +See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered +data is structured. + +4. IIO Interfacing Tools +======================== + +Linux Kernel Tools +------------------ + +Linux Kernel provides some userspace tools that can be used to retrieve data +from IIO sysfs: + +* lsiio: example application that provides a list of IIO devices and triggers +* iio_event_monitor: example application that reads events from an IIO device + and prints them +* iio_generic_buffer: example application that reads data from buffer +* iio_utils: set of APIs, typically used to access sysfs files. + +LibIIO +------ + +LibIIO is a C/C++ library that provides generic access to IIO devices. The +library abstracts the low-level details of the hardware, and provides a simple +yet complete programming interface that can be used for advanced projects. + +For more information about LibIIO, please see: +https://github.com/analogdevicesinc/libiio diff --git a/Documentation/iio/iio_devbuf.rst b/Documentation/iio/iio_devbuf.rst new file mode 100644 index 00000000000000..9919e4792d0e44 --- /dev/null +++ b/Documentation/iio/iio_devbuf.rst @@ -0,0 +1,152 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================= +Industrial IIO device buffers +============================= + +1. Overview +=========== + +The Industrial I/O core offers a way for continuous data capture based on a +trigger source. Multiple data channels can be read at once from +``/dev/iio:deviceX`` character device node, thus reducing the CPU load. + +Devices with buffer support feature an additional sub-directory in the +``/sys/bus/iio/devices/iio:deviceX/`` directory hierarchy, called bufferY, where +Y defaults to 0, for devices with a single buffer. + +2. Buffer attributes +==================== + +An IIO buffer has an associated attributes directory under +``/sys/bus/iio/iio:deviceX/bufferY/``. The attributes are described below. + +``length`` +---------- + +Read / Write attribute which states the total number of data samples (capacity) +that can be stored by the buffer. + +``enable`` +---------- + +Read / Write attribute which starts / stops the buffer capture. This file should +be written last, after length and selection of scan elements. Writing a non-zero +value may result in an error, such as EINVAL, if, for example, an unsupported +combination of channels is given. + +``watermark`` +------------- + +Read / Write positive integer attribute specifying the maximum number of scan +elements to wait for. + +Poll will block until the watermark is reached. + +Blocking read will wait until the minimum between the requested read amount or +the low watermark is available. + +Non-blocking read will retrieve the available samples from the buffer even if +there are less samples than the watermark level. This allows the application to +block on poll with a timeout and read the available samples after the timeout +expires and thus have a maximum delay guarantee. + +Data available +-------------- + +Read-only attribute indicating the bytes of data available in the buffer. In the +case of an output buffer, this indicates the amount of empty space available to +write data to. In the case of an input buffer, this indicates the amount of data +available for reading. + +Scan elements +------------- + +The meta information associated with a channel data placed in a buffer is called +a scan element. The scan elements attributes are presented below. + +**_en** + +Read / Write attribute used for enabling a channel. If and only if its value +is non-zero, then a triggered capture will contain data samples for this +channel. + +**_index** + +Read-only unsigned integer attribute specifying the position of the channel in +the buffer. Note these are not dependent on what is enabled and may not be +contiguous. Thus for userspace to establish the full layout these must be used +in conjunction with all _en attributes to establish which channels are present, +and the relevant _type attributes to establish the data storage format. + +**_type** + +Read-only attribute containing the description of the scan element data storage +within the buffer and hence the form in which it is read from userspace. Format +is [be|le]:[s|u]bits/storagebits[Xrepeat][>>shift], where: + +- **be** or **le** specifies big or little-endian. +- **s** or **u** specifies if signed (2's complement) or unsigned. +- **bits** is the number of valid data bits. +- **storagebits** is the number of bits (after padding) that it occupies in the + buffer. +- **repeat** specifies the number of bits/storagebits repetitions. When the + repeat element is 0 or 1, then the repeat value is omitted. +- **shift** if specified, is the shift that needs to be applied prior to + masking out unused bits. + +For example, a driver for a 3-axis accelerometer with 12-bit resolution where +data is stored in two 8-bit registers is as follows:: + + 7 6 5 4 3 2 1 0 + +---+---+---+---+---+---+---+---+ + |D3 |D2 |D1 |D0 | X | X | X | X | (LOW byte, address 0x06) + +---+---+---+---+---+---+---+---+ + + 7 6 5 4 3 2 1 0 + +---+---+---+---+---+---+---+---+ + |D11|D10|D9 |D8 |D7 |D6 |D5 |D4 | (HIGH byte, address 0x07) + +---+---+---+---+---+---+---+---+ + +will have the following scan element type for each axis: + +.. code-block:: bash + + $ cat /sys/bus/iio/devices/iio:device0/buffer0/in_accel_y_type + le:s12/16>>4 + +A userspace application will interpret data samples read from the buffer as +two-byte little-endian signed data, that needs a 4 bits right shift before +masking out the 12 valid bits of data. + +It is also worth mentioning that the data in the buffer will be naturally +aligned, so the userspace application has to handle the buffers accordingly. + +Take for example, a driver with four channels with the following description: +- channel0: index: 0, type: be:u16/16>>0 +- channel1: index: 1, type: be:u32/32>>0 +- channel2: index: 2, type: be:u32/32>>0 +- channel3: index: 3, type: be:u64/64>>0 + +If all channels are enabled, the data will be aligned in the buffer as follows:: + + 0-1 2 3 4-7 8-11 12 13 14 15 16-23 -> buffer byte number + +-----+---+---+-----+-----+---+---+---+---+-----+ + |CHN_0|PAD|PAD|CHN_1|CHN_2|PAD|PAD|PAD|PAD|CHN_3| -> buffer content + +-----+---+---+-----+-----+---+---+---+---+-----+ + +If only channel0 and channel3 are enabled, the data will be aligned in the +buffer as follows:: + + 0-1 2 3 4 5 6 7 8-15 -> buffer byte number + +-----+---+---+---+---+---+---+-----+ + |CHN_0|PAD|PAD|PAD|PAD|PAD|PAD|CHN_3| -> buffer content + +-----+---+---+---+---+---+---+-----+ + +Typically the buffered data is found in raw format (unscaled with no offset +applied), however there are corner cases in which the buffered data may be found +in a processed form. Please note that these corner cases are not addressed by +this documentation. + +Please see ``Documentation/ABI/testing/sysfs-bus-iio`` for a complete +description of the attributes. diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst index 1b7292c58cd07a..30b09eefe75edf 100644 --- a/Documentation/iio/index.rst +++ b/Documentation/iio/index.rst @@ -8,7 +8,14 @@ Industrial I/O :maxdepth: 1 iio_configfs + iio_devbuf - ep93xx_adc +Industrial I/O Kernel Drivers +============================= +.. toctree:: + :maxdepth: 1 + + adis16475 bno055 + ep93xx_adc diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index 0135905c0aa352..79ac2e8184f6f0 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -393,7 +393,7 @@ of C0, which doesn't depend on M:: choices:: - "choice" [symbol] + "choice" <choice options> <choice block> "endchoice" @@ -412,10 +412,6 @@ the kernel, but all drivers can be compiled as modules. A choice accepts another option "optional", which allows to set the choice to 'n' and no entry needs to be selected. -If no [symbol] is associated with a choice, then you can not have multiple -definitions of that choice. If a [symbol] is associated to the choice, -then you may define the same choice (i.e. with the same entries) in another -place. comment:: diff --git a/Documentation/kbuild/kconfig.rst b/Documentation/kbuild/kconfig.rst index c946eb44bd138e..fc4e845bc249ba 100644 --- a/Documentation/kbuild/kconfig.rst +++ b/Documentation/kbuild/kconfig.rst @@ -1,10 +1,10 @@ -=================== -Kconfig make config -=================== +================================= +Configuration targets and editors +================================= -This file contains some assistance for using `make *config`. +This file contains some assistance for using ``make *config``. -Use "make help" to list all of the possible configuration targets. +Use ``make help`` to list all of the possible configuration targets. The xconfig ('qconf'), menuconfig ('mconf'), and nconfig ('nconf') programs also have embedded help text. Be sure to check that for @@ -12,8 +12,9 @@ navigation, search, and other general help text. The gconfig ('gconf') program has limited help text. + General -------- +======= New kernel releases often introduce new config symbols. Often more important, new kernel releases may rename config symbols. When @@ -24,118 +25,102 @@ symbols have been introduced. To see a list of new config symbols, use:: - cp user/some/old.config .config - make listnewconfig + cp user/some/old.config .config + make listnewconfig and the config program will list any new symbols, one per line. Alternatively, you can use the brute force method:: - make oldconfig - scripts/diffconfig .config.old .config | less - ----------------------------------------------------------------------- - -Environment variables for `*config` + make oldconfig + scripts/diffconfig .config.old .config | less -KCONFIG_CONFIG --------------- -This environment variable can be used to specify a default kernel config -file name to override the default name of ".config". -KCONFIG_DEFCONFIG_LIST ----------------------- +Environment variables +===================== -This environment variable specifies a list of config files which can be used -as a base configuration in case the .config does not exist yet. Entries in -the list are separated with whitespaces to each other, and the first one -that exists is used. +Environment variables for ``*config``: -KCONFIG_OVERWRITECONFIG ------------------------ -If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not -break symlinks when .config is a symlink to somewhere else. +``KCONFIG_CONFIG`` + This environment variable can be used to specify a default kernel config + file name to override the default name of ".config". -KCONFIG_WARN_UNKNOWN_SYMBOLS ----------------------------- -This environment variable makes Kconfig warn about all unrecognized -symbols in the config input. +``KCONFIG_DEFCONFIG_LIST`` + This environment variable specifies a list of config files which can be + used as a base configuration in case the .config does not exist yet. + Entries in the list are separated with whitespaces to each other, and + the first one that exists is used. -KCONFIG_WERROR --------------- -If set, Kconfig treats warnings as errors. +``KCONFIG_OVERWRITECONFIG`` + If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not + break symlinks when .config is a symlink to somewhere else. -`CONFIG_` ---------- -If you set `CONFIG_` in the environment, Kconfig will prefix all symbols -with its value when saving the configuration, instead of using the default, -`CONFIG_`. +``KCONFIG_WARN_UNKNOWN_SYMBOLS`` + This environment variable makes Kconfig warn about all unrecognized + symbols in the config input. ----------------------------------------------------------------------- +``KCONFIG_WERROR`` + If set, Kconfig treats warnings as errors. -Environment variables for '{allyes/allmod/allno/rand}config' +``CONFIG_`` + If you set ``CONFIG_`` in the environment, Kconfig will prefix all symbols + with its value when saving the configuration, instead of using the + default, ``CONFIG_``. -KCONFIG_ALLCONFIG ------------------ -(partially based on lkml email from/by Rob Landley, re: miniconfig) +Environment variables for ``{allyes/allmod/allno/rand}config``: --------------------------------------------------- +``KCONFIG_ALLCONFIG`` + The allyesconfig/allmodconfig/allnoconfig/randconfig variants can also + use the environment variable KCONFIG_ALLCONFIG as a flag or a filename + that contains config symbols that the user requires to be set to a + specific value. If KCONFIG_ALLCONFIG is used without a filename where + KCONFIG_ALLCONFIG == "" or KCONFIG_ALLCONFIG == "1", ``make *config`` + checks for a file named "all{yes/mod/no/def/random}.config" + (corresponding to the ``*config`` command that was used) for symbol values + that are to be forced. If this file is not found, it checks for a + file named "all.config" to contain forced values. -The allyesconfig/allmodconfig/allnoconfig/randconfig variants can also -use the environment variable KCONFIG_ALLCONFIG as a flag or a filename -that contains config symbols that the user requires to be set to a -specific value. If KCONFIG_ALLCONFIG is used without a filename where -KCONFIG_ALLCONFIG == "" or KCONFIG_ALLCONFIG == "1", `make *config` -checks for a file named "all{yes/mod/no/def/random}.config" -(corresponding to the `*config` command that was used) for symbol values -that are to be forced. If this file is not found, it checks for a -file named "all.config" to contain forced values. + This enables you to create "miniature" config (miniconfig) or custom + config files containing just the config symbols that you are interested + in. Then the kernel config system generates the full .config file, + including symbols of your miniconfig file. -This enables you to create "miniature" config (miniconfig) or custom -config files containing just the config symbols that you are interested -in. Then the kernel config system generates the full .config file, -including symbols of your miniconfig file. - -This 'KCONFIG_ALLCONFIG' file is a config file which contains -(usually a subset of all) preset config symbols. These variable -settings are still subject to normal dependency checks. - -Examples:: + This ``KCONFIG_ALLCONFIG`` file is a config file which contains + (usually a subset of all) preset config symbols. These variable + settings are still subject to normal dependency checks. - KCONFIG_ALLCONFIG=custom-notebook.config make allnoconfig + Examples:: -or:: + KCONFIG_ALLCONFIG=custom-notebook.config make allnoconfig - KCONFIG_ALLCONFIG=mini.config make allnoconfig + or:: -or:: + KCONFIG_ALLCONFIG=mini.config make allnoconfig - make KCONFIG_ALLCONFIG=mini.config allnoconfig + or:: -These examples will disable most options (allnoconfig) but enable or -disable the options that are explicitly listed in the specified -mini-config files. + make KCONFIG_ALLCONFIG=mini.config allnoconfig ----------------------------------------------------------------------- + These examples will disable most options (allnoconfig) but enable or + disable the options that are explicitly listed in the specified + mini-config files. -Environment variables for 'randconfig' +Environment variables for ``randconfig``: -KCONFIG_SEED ------------- -You can set this to the integer value used to seed the RNG, if you want -to somehow debug the behaviour of the kconfig parser/frontends. -If not set, the current time will be used. +``KCONFIG_SEED`` + You can set this to the integer value used to seed the RNG, if you want + to somehow debug the behaviour of the kconfig parser/frontends. + If not set, the current time will be used. -KCONFIG_PROBABILITY -------------------- -This variable can be used to skew the probabilities. This variable can -be unset or empty, or set to three different formats: +``KCONFIG_PROBABILITY`` + This variable can be used to skew the probabilities. This variable can + be unset or empty, or set to three different formats: ======================= ================== ===================== - KCONFIG_PROBABILITY y:n split y:m:n split + KCONFIG_PROBABILITY y:n split y:m:n split ======================= ================== ===================== - unset or empty 50 : 50 33 : 33 : 34 - N N : 100-N N/2 : N/2 : 100-N + unset or empty 50 : 50 33 : 33 : 34 + N N : 100-N N/2 : N/2 : 100-N [1] N:M N+M : 100-(N+M) N : M : 100-(N+M) [2] N:M:L N : 100-N M : L : 100-(M+L) ======================= ================== ===================== @@ -149,112 +134,98 @@ that: Examples:: - KCONFIG_PROBABILITY=10 - 10% of booleans will be set to 'y', 90% to 'n' - 5% of tristates will be set to 'y', 5% to 'm', 90% to 'n' - KCONFIG_PROBABILITY=15:25 - 40% of booleans will be set to 'y', 60% to 'n' - 15% of tristates will be set to 'y', 25% to 'm', 60% to 'n' - KCONFIG_PROBABILITY=10:15:15 - 10% of booleans will be set to 'y', 90% to 'n' - 15% of tristates will be set to 'y', 15% to 'm', 70% to 'n' + KCONFIG_PROBABILITY=10 + 10% of booleans will be set to 'y', 90% to 'n' + 5% of tristates will be set to 'y', 5% to 'm', 90% to 'n' + KCONFIG_PROBABILITY=15:25 + 40% of booleans will be set to 'y', 60% to 'n' + 15% of tristates will be set to 'y', 25% to 'm', 60% to 'n' + KCONFIG_PROBABILITY=10:15:15 + 10% of booleans will be set to 'y', 90% to 'n' + 15% of tristates will be set to 'y', 15% to 'm', 70% to 'n' ----------------------------------------------------------------------- +Environment variables for ``syncconfig``: -Environment variables for 'syncconfig' +``KCONFIG_NOSILENTUPDATE`` + If this variable has a non-blank value, it prevents silent kernel + config updates (requires explicit updates). -KCONFIG_NOSILENTUPDATE ----------------------- -If this variable has a non-blank value, it prevents silent kernel -config updates (requires explicit updates). +``KCONFIG_AUTOCONFIG`` + This environment variable can be set to specify the path & name of the + "auto.conf" file. Its default value is "include/config/auto.conf". -KCONFIG_AUTOCONFIG ------------------- -This environment variable can be set to specify the path & name of the -"auto.conf" file. Its default value is "include/config/auto.conf". +``KCONFIG_AUTOHEADER`` + This environment variable can be set to specify the path & name of the + "autoconf.h" (header) file. + Its default value is "include/generated/autoconf.h". -KCONFIG_AUTOHEADER ------------------- -This environment variable can be set to specify the path & name of the -"autoconf.h" (header) file. -Its default value is "include/generated/autoconf.h". - - ----------------------------------------------------------------------- menuconfig ----------- - -SEARCHING for CONFIG symbols +========== Searching in menuconfig: - The Search function searches for kernel configuration symbol - names, so you have to know something close to what you are - looking for. + The Search function searches for kernel configuration symbol + names, so you have to know something close to what you are + looking for. - Example:: + Example:: - /hotplug - This lists all config symbols that contain "hotplug", - e.g., HOTPLUG_CPU, MEMORY_HOTPLUG. + /hotplug + This lists all config symbols that contain "hotplug", + e.g., HOTPLUG_CPU, MEMORY_HOTPLUG. - For search help, enter / followed by TAB-TAB (to highlight - <Help>) and Enter. This will tell you that you can also use - regular expressions (regexes) in the search string, so if you - are not interested in MEMORY_HOTPLUG, you could try:: + For search help, enter / followed by TAB-TAB (to highlight + <Help>) and Enter. This will tell you that you can also use + regular expressions (regexes) in the search string, so if you + are not interested in MEMORY_HOTPLUG, you could try:: - /^hotplug + /^hotplug - When searching, symbols are sorted thus: + When searching, symbols are sorted thus: - - first, exact matches, sorted alphabetically (an exact match - is when the search matches the complete symbol name); - - then, other matches, sorted alphabetically. + - first, exact matches, sorted alphabetically (an exact match + is when the search matches the complete symbol name); + - then, other matches, sorted alphabetically. - For example: ^ATH.K matches: + For example, ^ATH.K matches: - ATH5K ATH9K ATH5K_AHB ATH5K_DEBUG [...] ATH6KL ATH6KL_DEBUG - [...] ATH9K_AHB ATH9K_BTCOEX_SUPPORT ATH9K_COMMON [...] + ATH5K ATH9K ATH5K_AHB ATH5K_DEBUG [...] ATH6KL ATH6KL_DEBUG + [...] ATH9K_AHB ATH9K_BTCOEX_SUPPORT ATH9K_COMMON [...] - of which only ATH5K and ATH9K match exactly and so are sorted - first (and in alphabetical order), then come all other symbols, - sorted in alphabetical order. + of which only ATH5K and ATH9K match exactly and so are sorted + first (and in alphabetical order), then come all other symbols, + sorted in alphabetical order. - In this menu, pressing the key in the (#) prefix will jump - directly to that location. You will be returned to the current - search results after exiting this new menu. + In this menu, pressing the key in the (#) prefix will jump + directly to that location. You will be returned to the current + search results after exiting this new menu. ----------------------------------------------------------------------- +User interface options for 'menuconfig': -User interface options for 'menuconfig' +``MENUCONFIG_COLOR`` + It is possible to select different color themes using the variable + MENUCONFIG_COLOR. To select a theme use:: -MENUCONFIG_COLOR ----------------- -It is possible to select different color themes using the variable -MENUCONFIG_COLOR. To select a theme use:: + make MENUCONFIG_COLOR=<theme> menuconfig - make MENUCONFIG_COLOR=<theme> menuconfig + Available themes are:: -Available themes are:: + - mono => selects colors suitable for monochrome displays + - blackbg => selects a color scheme with black background + - classic => theme with blue background. The classic look + - bluetitle => a LCD friendly version of classic. (default) - - mono => selects colors suitable for monochrome displays - - blackbg => selects a color scheme with black background - - classic => theme with blue background. The classic look - - bluetitle => a LCD friendly version of classic. (default) +``MENUCONFIG_MODE`` + This mode shows all sub-menus in one large tree. -MENUCONFIG_MODE ---------------- -This mode shows all sub-menus in one large tree. + Example:: -Example:: + make MENUCONFIG_MODE=single_menu menuconfig - make MENUCONFIG_MODE=single_menu menuconfig - ----------------------------------------------------------------------- nconfig -------- +======= nconfig is an alternate text-based configurator. It lists function keys across the bottom of the terminal (window) that execute commands. @@ -266,61 +237,59 @@ Use F1 for Global help or F3 for the Short help menu. Searching in nconfig: - You can search either in the menu entry "prompt" strings - or in the configuration symbols. + You can search either in the menu entry "prompt" strings + or in the configuration symbols. + + Use / to begin a search through the menu entries. This does + not support regular expressions. Use <Down> or <Up> for + Next hit and Previous hit, respectively. Use <Esc> to + terminate the search mode. - Use / to begin a search through the menu entries. This does - not support regular expressions. Use <Down> or <Up> for - Next hit and Previous hit, respectively. Use <Esc> to - terminate the search mode. + F8 (SymSearch) searches the configuration symbols for the + given string or regular expression (regex). - F8 (SymSearch) searches the configuration symbols for the - given string or regular expression (regex). + In the SymSearch, pressing the key in the (#) prefix will + jump directly to that location. You will be returned to the + current search results after exiting this new menu. - In the SymSearch, pressing the key in the (#) prefix will - jump directly to that location. You will be returned to the - current search results after exiting this new menu. +Environment variables: -NCONFIG_MODE ------------- -This mode shows all sub-menus in one large tree. +``NCONFIG_MODE`` + This mode shows all sub-menus in one large tree. -Example:: + Example:: - make NCONFIG_MODE=single_menu nconfig + make NCONFIG_MODE=single_menu nconfig ----------------------------------------------------------------------- xconfig -------- +======= Searching in xconfig: - The Search function searches for kernel configuration symbol - names, so you have to know something close to what you are - looking for. - - Example:: + The Search function searches for kernel configuration symbol + names, so you have to know something close to what you are + looking for. - Ctrl-F hotplug + Example:: - or:: + Ctrl-F hotplug - Menu: File, Search, hotplug + or:: - lists all config symbol entries that contain "hotplug" in - the symbol name. In this Search dialog, you may change the - config setting for any of the entries that are not grayed out. - You can also enter a different search string without having - to return to the main menu. + Menu: File, Search, hotplug + lists all config symbol entries that contain "hotplug" in + the symbol name. In this Search dialog, you may change the + config setting for any of the entries that are not grayed out. + You can also enter a different search string without having + to return to the main menu. ----------------------------------------------------------------------- gconfig -------- +======= Searching in gconfig: - There is no search command in gconfig. However, gconfig does - have several different viewing choices, modes, and options. + There is no search command in gconfig. However, gconfig does + have several different viewing choices, modes, and options. diff --git a/Documentation/misc-devices/xilinx_sdfec.rst b/Documentation/misc-devices/xilinx_sdfec.rst index 8c8a289d69a367..698e6630f3a7b3 100644 --- a/Documentation/misc-devices/xilinx_sdfec.rst +++ b/Documentation/misc-devices/xilinx_sdfec.rst @@ -29,7 +29,7 @@ follows: - Does not support shared LDPC code table wraparound The device tree entry is described in: -`linux-xlnx/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt <https://github.com/Xilinx/linux-xlnx/blob/master/Documentation/devicetree/bindings/misc/xlnx%2Csd-fec.txt>`_ +`linux-xlnx/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml <https://github.com/Xilinx/linux-xlnx/blob/master/Documentation/devicetree/bindings/misc/xlnx%2Csd-fec.yaml>`_ Modes of Operation diff --git a/Documentation/mm/damon/design.rst b/Documentation/mm/damon/design.rst index 1bb69524a62ea6..5620aab9b38507 100644 --- a/Documentation/mm/damon/design.rst +++ b/Documentation/mm/damon/design.rst @@ -31,6 +31,8 @@ DAMON subsystem is configured with three layers including interfaces for the user space, on top of the core layer. +.. _damon_design_configurable_operations_set: + Configurable Operations Set --------------------------- @@ -63,6 +65,8 @@ modules that built on top of the core layer using the API, which can be easily used by the user space end users. +.. _damon_operations_set: + Operations Set Layer ==================== @@ -71,16 +75,26 @@ The monitoring operations are defined in two parts: 1. Identification of the monitoring target address range for the address space. 2. Access check of specific address range in the target space. -DAMON currently provides the implementations of the operations for the physical -and virtual address spaces. Below two subsections describe how those work. +DAMON currently provides below three operation sets. Below two subsections +describe how those work. + + - vaddr: Monitor virtual address spaces of specific processes + - fvaddr: Monitor fixed virtual address ranges + - paddr: Monitor the physical address space of the system + .. _damon_design_vaddr_target_regions_construction: + VMA-based Target Address Range Construction ------------------------------------------- -This is only for the virtual address space monitoring operations -implementation. That for the physical address space simply asks users to -manually set the monitoring target address ranges. +A mechanism of ``vaddr`` DAMON operations set that automatically initializes +and updates the monitoring target address regions so that entire memory +mappings of the target processes can be covered. + +This mechanism is only for the ``vaddr`` operations set. In cases of +``fvaddr`` and ``paddr`` operation sets, users are asked to manually set the +monitoring target address ranges. Only small parts in the super-huge virtual address space of the processes are mapped to the physical memory and accessed. Thus, tracking the unmapped @@ -294,9 +308,29 @@ not mandated to support all actions of the list. Hence, the availability of specific DAMOS action depends on what operations set is selected to be used together. -Applying an action to a region is considered as changing the region's -characteristics. Hence, DAMOS resets the age of regions when an action is -applied to those. +The list of the supported actions, their meaning, and DAMON operations sets +that supports each action are as below. + + - ``willneed``: Call ``madvise()`` for the region with ``MADV_WILLNEED``. + Supported by ``vaddr`` and ``fvaddr`` operations set. + - ``cold``: Call ``madvise()`` for the region with ``MADV_COLD``. + Supported by ``vaddr`` and ``fvaddr`` operations set. + - ``pageout``: Reclaim the region. + Supported by ``vaddr``, ``fvaddr`` and ``paddr`` operations set. + - ``hugepage``: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``. + Supported by ``vaddr`` and ``fvaddr`` operations set. + - ``nohugepage``: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``. + Supported by ``vaddr`` and ``fvaddr`` operations set. + - ``lru_prio``: Prioritize the region on its LRU lists. + Supported by ``paddr`` operations set. + - ``lru_deprio``: Deprioritize the region on its LRU lists. + Supported by ``paddr`` operations set. + - ``stat``: Do nothing but count the statistics. + Supported by all operations sets. + +Applying the actions except ``stat`` to a region is considered as changing the +region's characteristics. Hence, DAMOS resets the age of regions when any such +actions are applied to those. .. _damon_design_damos_access_pattern: @@ -364,12 +398,28 @@ Aim-oriented Feedback-driven Auto-tuning ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Automatic feedback-driven quota tuning. Instead of setting the absolute quota -value, users can repeatedly provide numbers representing how much of their goal -for the scheme is achieved as feedback. DAMOS then automatically tunes the +value, users can specify the metric of their interest, and what target value +they want the metric value to be. DAMOS then automatically tunes the aggressiveness (the quota) of the corresponding scheme. For example, if DAMOS is under achieving the goal, DAMOS automatically increases the quota. If DAMOS is over achieving the goal, it decreases the quota. +The goal can be specified with three parameters, namely ``target_metric``, +``target_value``, and ``current_value``. The auto-tuning mechanism tries to +make ``current_value`` of ``target_metric`` be same to ``target_value``. +Currently, two ``target_metric`` are provided. + +- ``user_input``: User-provided value. Users could use any metric that they + has interest in for the value. Use space main workload's latency or + throughput, system metrics like free memory ratio or memory pressure stall + time (PSI) could be examples. Note that users should explicitly set + ``current_value`` on their own in this case. In other words, users should + repeatedly provide the feedback. +- ``some_mem_psi_us``: System-wide ``some`` memory pressure stall information + in microseconds that measured from last quota reset to next quota reset. + DAMOS does the measurement on its own, so only ``target_value`` need to be + set by users at the initial time. In other words, DAMOS does self-feedback. + .. _damon_design_damos_watermarks: diff --git a/Documentation/mm/damon/maintainer-profile.rst b/Documentation/mm/damon/maintainer-profile.rst index a84c14e5905307..5a306e4de22e50 100644 --- a/Documentation/mm/damon/maintainer-profile.rst +++ b/Documentation/mm/damon/maintainer-profile.rst @@ -21,8 +21,8 @@ be queued in mm-stable [3]_ , and finally pull-requested to the mainline by the memory management subsystem maintainer. Note again the patches for review should be made against the mm-unstable -tree[1] whenever possible. damon/next is only for preview of others' works in -progress. +tree [1]_ whenever possible. damon/next is only for preview of others' works +in progress. Submit checklist addendum ------------------------- @@ -41,8 +41,8 @@ Further doing below and putting the results will be helpful. Key cycle dates --------------- -Patches can be sent anytime. Key cycle dates of the mm-unstable[1] and -mm-stable[3] trees depend on the memory management subsystem maintainer. +Patches can be sent anytime. Key cycle dates of the mm-unstable [1]_ and +mm-stable [3]_ trees depend on the memory management subsystem maintainer. Review cadence -------------- diff --git a/Documentation/mm/page_owner.rst b/Documentation/mm/page_owner.rst index 62e3f7ab23cc18..0d0334cd51798b 100644 --- a/Documentation/mm/page_owner.rst +++ b/Documentation/mm/page_owner.rst @@ -24,6 +24,11 @@ fragmentation statistics can be obtained through gfp flag information of each page. It is already implemented and activated if page owner is enabled. Other usages are more than welcome. +It can also be used to show all the stacks and their outstanding +allocations, which gives us a quick overview of where the memory is going +without the need to screen through all the pages and match the allocation +and free operation. + page owner is disabled by default. So, if you'd like to use it, you need to add "page_owner=on" to your boot cmdline. If the kernel is built with page owner and page owner is disabled in runtime due to not enabling @@ -68,6 +73,46 @@ Usage 4) Analyze information from page owner:: + cat /sys/kernel/debug/page_owner_stacks/show_stacks > stacks.txt + cat stacks.txt + prep_new_page+0xa9/0x120 + get_page_from_freelist+0x7e6/0x2140 + __alloc_pages+0x18a/0x370 + new_slab+0xc8/0x580 + ___slab_alloc+0x1f2/0xaf0 + __slab_alloc.isra.86+0x22/0x40 + kmem_cache_alloc+0x31b/0x350 + __khugepaged_enter+0x39/0x100 + dup_mmap+0x1c7/0x5ce + copy_process+0x1afe/0x1c90 + kernel_clone+0x9a/0x3c0 + __do_sys_clone+0x66/0x90 + do_syscall_64+0x7f/0x160 + entry_SYSCALL_64_after_hwframe+0x6c/0x74 + stack_count: 234 + ... + ... + echo 7000 > /sys/kernel/debug/page_owner_stacks/count_threshold + cat /sys/kernel/debug/page_owner_stacks/show_stacks> stacks_7000.txt + cat stacks_7000.txt + prep_new_page+0xa9/0x120 + get_page_from_freelist+0x7e6/0x2140 + __alloc_pages+0x18a/0x370 + alloc_pages_mpol+0xdf/0x1e0 + folio_alloc+0x14/0x50 + filemap_alloc_folio+0xb0/0x100 + page_cache_ra_unbounded+0x97/0x180 + filemap_fault+0x4b4/0x1200 + __do_fault+0x2d/0x110 + do_pte_missing+0x4b0/0xa30 + __handle_mm_fault+0x7fa/0xb70 + handle_mm_fault+0x125/0x300 + do_user_addr_fault+0x3c9/0x840 + exc_page_fault+0x68/0x150 + asm_exc_page_fault+0x22/0x30 + stack_count: 8248 + ... + cat /sys/kernel/debug/page_owner > page_owner_full.txt ./page_owner_sort page_owner_full.txt sorted_page_owner.txt diff --git a/Documentation/mm/slub.rst b/Documentation/mm/slub.rst index be75971532f57d..b517ee28a9552d 100644 --- a/Documentation/mm/slub.rst +++ b/Documentation/mm/slub.rst @@ -9,7 +9,7 @@ SLUB can enable debugging only for selected slabs in order to avoid an impact on overall system performance which may make a bug more difficult to find. -In order to switch debugging on one can add an option ``slub_debug`` +In order to switch debugging on one can add an option ``slab_debug`` to the kernel command line. That will enable full debugging for all slabs. @@ -26,16 +26,16 @@ be enabled on the command line. F.e. no tracking information will be available without debugging on and validation can only partially be performed if debugging was not switched on. -Some more sophisticated uses of slub_debug: +Some more sophisticated uses of slab_debug: ------------------------------------------- -Parameters may be given to ``slub_debug``. If none is specified then full +Parameters may be given to ``slab_debug``. If none is specified then full debugging is enabled. Format: -slub_debug=<Debug-Options> +slab_debug=<Debug-Options> Enable options for all slabs -slub_debug=<Debug-Options>,<slab name1>,<slab name2>,... +slab_debug=<Debug-Options>,<slab name1>,<slab name2>,... Enable options only for select slabs (no spaces after a comma) @@ -60,23 +60,23 @@ Possible debug options are:: F.e. in order to boot just with sanity checks and red zoning one would specify:: - slub_debug=FZ + slab_debug=FZ Trying to find an issue in the dentry cache? Try:: - slub_debug=,dentry + slab_debug=,dentry to only enable debugging on the dentry cache. You may use an asterisk at the end of the slab name, in order to cover all slabs with the same prefix. For example, here's how you can poison the dentry cache as well as all kmalloc slabs:: - slub_debug=P,kmalloc-*,dentry + slab_debug=P,kmalloc-*,dentry Red zoning and tracking may realign the slab. We can just apply sanity checks to the dentry cache with:: - slub_debug=F,dentry + slab_debug=F,dentry Debugging options may require the minimum possible slab order to increase as a result of storing the metadata (for example, caches with PAGE_SIZE object @@ -84,20 +84,20 @@ sizes). This has a higher liklihood of resulting in slab allocation errors in low memory situations or if there's high fragmentation of memory. To switch off debugging for such caches by default, use:: - slub_debug=O + slab_debug=O You can apply different options to different list of slab names, using blocks of options. This will enable red zoning for dentry and user tracking for kmalloc. All other slabs will not get any debugging enabled:: - slub_debug=Z,dentry;U,kmalloc-* + slab_debug=Z,dentry;U,kmalloc-* You can also enable options (e.g. sanity checks and poisoning) for all caches except some that are deemed too performance critical and don't need to be debugged by specifying global debug options followed by a list of slab names with "-" as options:: - slub_debug=FZ;-,zs_handle,zspage + slab_debug=FZ;-,zs_handle,zspage The state of each debug option for a slab can be found in the respective files under:: @@ -105,7 +105,7 @@ under:: /sys/kernel/slab/<slab name>/ If the file contains 1, the option is enabled, 0 means disabled. The debug -options from the ``slub_debug`` parameter translate to the following files:: +options from the ``slab_debug`` parameter translate to the following files:: F sanity_checks Z red_zone @@ -129,7 +129,7 @@ in order to reduce overhead and increase cache hotness of objects. Slab validation =============== -SLUB can validate all object if the kernel was booted with slub_debug. In +SLUB can validate all object if the kernel was booted with slab_debug. In order to do so you must have the ``slabinfo`` tool. Then you can do :: @@ -150,29 +150,29 @@ list_lock once in a while to deal with partial slabs. That overhead is governed by the order of the allocation for each slab. The allocations can be influenced by kernel parameters: -.. slub_min_objects=x (default 4) -.. slub_min_order=x (default 0) -.. slub_max_order=x (default 3 (PAGE_ALLOC_COSTLY_ORDER)) +.. slab_min_objects=x (default: automatically scaled by number of cpus) +.. slab_min_order=x (default 0) +.. slab_max_order=x (default 3 (PAGE_ALLOC_COSTLY_ORDER)) -``slub_min_objects`` +``slab_min_objects`` allows to specify how many objects must at least fit into one slab in order for the allocation order to be acceptable. In general slub will be able to perform this number of allocations on a slab without consulting centralized resources (list_lock) where contention may occur. -``slub_min_order`` +``slab_min_order`` specifies a minimum order of slabs. A similar effect like - ``slub_min_objects``. + ``slab_min_objects``. -``slub_max_order`` - specified the order at which ``slub_min_objects`` should no +``slab_max_order`` + specified the order at which ``slab_min_objects`` should no longer be checked. This is useful to avoid SLUB trying to - generate super large order pages to fit ``slub_min_objects`` + generate super large order pages to fit ``slab_min_objects`` of a slab cache with large object sizes into one high order page. Setting command line parameter ``debug_guardpage_minorder=N`` (N > 0), forces setting - ``slub_max_order`` to 0, what cause minimum possible order of + ``slab_max_order`` to 0, what cause minimum possible order of slabs allocation. SLUB Debug output @@ -219,7 +219,7 @@ Here is a sample of slub debug output:: FIX kmalloc-8: Restoring Redzone 0xc90f6d28-0xc90f6d2b=0xcc If SLUB encounters a corrupted object (full detection requires the kernel -to be booted with slub_debug) then the following output will be dumped +to be booted with slab_debug) then the following output will be dumped into the syslog: 1. Description of the problem encountered @@ -239,7 +239,7 @@ into the syslog: pid=<pid of the process> (Object allocation / free information is only available if SLAB_STORE_USER is - set for the slab. slub_debug sets that option) + set for the slab. slab_debug sets that option) 2. The object contents if an object was involved. @@ -262,7 +262,7 @@ into the syslog: the object boundary. (Redzone information is only available if SLAB_RED_ZONE is set. - slub_debug sets that option) + slab_debug sets that option) Padding <address> : <bytes> Unused data to fill up the space in order to get the next object @@ -296,7 +296,7 @@ Emergency operations Minimal debugging (sanity checks alone) can be enabled by booting with:: - slub_debug=F + slab_debug=F This will be generally be enough to enable the resiliency features of slub which will keep the system running even if a bad kernel component will @@ -311,13 +311,13 @@ and enabling debugging only for that cache I.e.:: - slub_debug=F,dentry + slab_debug=F,dentry If the corruption occurs by writing after the end of the object then it may be advisable to enable a Redzone to avoid corrupting the beginning of other objects:: - slub_debug=FZ,dentry + slab_debug=FZ,dentry Extended slabinfo mode and plotting =================================== diff --git a/Documentation/power/energy-model.rst b/Documentation/power/energy-model.rst index 13225965c9a4c0..ada4938c37e56e 100644 --- a/Documentation/power/energy-model.rst +++ b/Documentation/power/energy-model.rst @@ -71,6 +71,31 @@ whose performance is scaled together. Performance domains generally have a required to have the same micro-architecture. CPUs in different performance domains can have different micro-architectures. +To better reflect power variation due to static power (leakage) the EM +supports runtime modifications of the power values. The mechanism relies on +RCU to free the modifiable EM perf_state table memory. Its user, the task +scheduler, also uses RCU to access this memory. The EM framework provides +API for allocating/freeing the new memory for the modifiable EM table. +The old memory is freed automatically using RCU callback mechanism when there +are no owners anymore for the given EM runtime table instance. This is tracked +using kref mechanism. The device driver which provided the new EM at runtime, +should call EM API to free it safely when it's no longer needed. The EM +framework will handle the clean-up when it's possible. + +The kernel code which want to modify the EM values is protected from concurrent +access using a mutex. Therefore, the device driver code must run in sleeping +context when it tries to modify the EM. + +With the runtime modifiable EM we switch from a 'single and during the entire +runtime static EM' (system property) design to a 'single EM which can be +changed during runtime according e.g. to the workload' (system and workload +property) design. + +It is possible also to modify the CPU performance values for each EM's +performance state. Thus, the full power and performance profile (which +is an exponential curve) can be changed according e.g. to the workload +or system property. + 2. Core APIs ------------ @@ -175,10 +200,82 @@ CPUfreq governor is in use in case of CPU device. Currently this calculation is not provided for other type of devices. More details about the above APIs can be found in ``<linux/energy_model.h>`` -or in Section 2.4 +or in Section 2.5 + + +2.4 Runtime modifications +^^^^^^^^^^^^^^^^^^^^^^^^^ + +Drivers willing to update the EM at runtime should use the following dedicated +function to allocate a new instance of the modified EM. The API is listed +below:: + + struct em_perf_table __rcu *em_table_alloc(struct em_perf_domain *pd); + +This allows to allocate a structure which contains the new EM table with +also RCU and kref needed by the EM framework. The 'struct em_perf_table' +contains array 'struct em_perf_state state[]' which is a list of performance +states in ascending order. That list must be populated by the device driver +which wants to update the EM. The list of frequencies can be taken from +existing EM (created during boot). The content in the 'struct em_perf_state' +must be populated by the driver as well. + +This is the API which does the EM update, using RCU pointers swap:: + + int em_dev_update_perf_domain(struct device *dev, + struct em_perf_table __rcu *new_table); + +Drivers must provide a pointer to the allocated and initialized new EM +'struct em_perf_table'. That new EM will be safely used inside the EM framework +and will be visible to other sub-systems in the kernel (thermal, powercap). +The main design goal for this API is to be fast and avoid extra calculations +or memory allocations at runtime. When pre-computed EMs are available in the +device driver, than it should be possible to simply re-use them with low +performance overhead. + +In order to free the EM, provided earlier by the driver (e.g. when the module +is unloaded), there is a need to call the API:: + + void em_table_free(struct em_perf_table __rcu *table); + +It will allow the EM framework to safely remove the memory, when there is +no other sub-system using it, e.g. EAS. + +To use the power values in other sub-systems (like thermal, powercap) there is +a need to call API which protects the reader and provide consistency of the EM +table data:: + + struct em_perf_state *em_perf_state_from_pd(struct em_perf_domain *pd); + +It returns the 'struct em_perf_state' pointer which is an array of performance +states in ascending order. +This function must be called in the RCU read lock section (after the +rcu_read_lock()). When the EM table is not needed anymore there is a need to +call rcu_real_unlock(). In this way the EM safely uses the RCU read section +and protects the users. It also allows the EM framework to manage the memory +and free it. More details how to use it can be found in Section 3.2 in the +example driver. + +There is dedicated API for device drivers to calculate em_perf_state::cost +values:: + + int em_dev_compute_costs(struct device *dev, struct em_perf_state *table, + int nr_states); + +These 'cost' values from EM are used in EAS. The new EM table should be passed +together with the number of entries and device pointer. When the computation +of the cost values is done properly the return value from the function is 0. +The function takes care for right setting of inefficiency for each performance +state as well. It updates em_perf_state::flags accordingly. +Then such prepared new EM can be passed to the em_dev_update_perf_domain() +function, which will allow to use it. + +More details about the above APIs can be found in ``<linux/energy_model.h>`` +or in Section 3.2 with an example code showing simple implementation of the +updating mechanism in a device driver. -2.4 Description details of this API +2.5 Description details of this API ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. kernel-doc:: include/linux/energy_model.h :internal: @@ -187,8 +284,11 @@ or in Section 2.4 :export: -3. Example driver ------------------ +3. Examples +----------- + +3.1 Example driver with EM registration +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The CPUFreq framework supports dedicated callback for registering the EM for a given CPU(s) 'policy' object: cpufreq_driver::register_em(). @@ -242,3 +342,78 @@ EM framework:: 39 static struct cpufreq_driver foo_cpufreq_driver = { 40 .register_em = foo_cpufreq_register_em, 41 }; + + +3.2 Example driver with EM modification +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +This section provides a simple example of a thermal driver modifying the EM. +The driver implements a foo_thermal_em_update() function. The driver is woken +up periodically to check the temperature and modify the EM data:: + + -> drivers/soc/example/example_em_mod.c + + 01 static void foo_get_new_em(struct foo_context *ctx) + 02 { + 03 struct em_perf_table __rcu *em_table; + 04 struct em_perf_state *table, *new_table; + 05 struct device *dev = ctx->dev; + 06 struct em_perf_domain *pd; + 07 unsigned long freq; + 08 int i, ret; + 09 + 10 pd = em_pd_get(dev); + 11 if (!pd) + 12 return; + 13 + 14 em_table = em_table_alloc(pd); + 15 if (!em_table) + 16 return; + 17 + 18 new_table = em_table->state; + 19 + 20 rcu_read_lock(); + 21 table = em_perf_state_from_pd(pd); + 22 for (i = 0; i < pd->nr_perf_states; i++) { + 23 freq = table[i].frequency; + 24 foo_get_power_perf_values(dev, freq, &new_table[i]); + 25 } + 26 rcu_read_unlock(); + 27 + 28 /* Calculate 'cost' values for EAS */ + 29 ret = em_dev_compute_costs(dev, table, pd->nr_perf_states); + 30 if (ret) { + 31 dev_warn(dev, "EM: compute costs failed %d\n", ret); + 32 em_free_table(em_table); + 33 return; + 34 } + 35 + 36 ret = em_dev_update_perf_domain(dev, em_table); + 37 if (ret) { + 38 dev_warn(dev, "EM: update failed %d\n", ret); + 39 em_free_table(em_table); + 40 return; + 41 } + 42 + 43 /* + 44 * Since it's one-time-update drop the usage counter. + 45 * The EM framework will later free the table when needed. + 46 */ + 47 em_table_free(em_table); + 48 } + 49 + 50 /* + 51 * Function called periodically to check the temperature and + 52 * update the EM if needed + 53 */ + 54 static void foo_thermal_em_update(struct foo_context *ctx) + 55 { + 56 struct device *dev = ctx->dev; + 57 int cpu; + 58 + 59 ctx->temperature = foo_get_temp(dev, ctx); + 60 if (ctx->temperature < FOO_EM_UPDATE_TEMP_THRESHOLD) + 61 return; + 62 + 63 foo_get_new_em(ctx); + 64 } diff --git a/Documentation/power/opp.rst b/Documentation/power/opp.rst index a7c03c47098071..1b7f1d854f14a6 100644 --- a/Documentation/power/opp.rst +++ b/Documentation/power/opp.rst @@ -305,7 +305,7 @@ dev_pm_opp_get_opp_count { /* Do things */ num_available = dev_pm_opp_get_opp_count(dev); - speeds = kzalloc(sizeof(u32) * num_available, GFP_KERNEL); + speeds = kcalloc(num_available, sizeof(u32), GFP_KERNEL); /* populate the table in increasing order */ freq = 0; while (!IS_ERR(opp = dev_pm_opp_find_freq_ceil(dev, &freq))) { diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst index a125544b4cb68d..12070320307e5c 100644 --- a/Documentation/power/pci.rst +++ b/Documentation/power/pci.rst @@ -625,7 +625,7 @@ The PCI subsystem-level callbacks they correspond to:: pci_pm_poweroff() pci_pm_poweroff_noirq() -work in analogy with pci_pm_suspend() and pci_pm_poweroff_noirq(), respectively, +work in analogy with pci_pm_suspend() and pci_pm_suspend_noirq(), respectively, although they don't attempt to save the device's standard configuration registers. diff --git a/Documentation/power/runtime_pm.rst b/Documentation/power/runtime_pm.rst index 65b86e487afe00..5c4e730f38d05e 100644 --- a/Documentation/power/runtime_pm.rst +++ b/Documentation/power/runtime_pm.rst @@ -154,7 +154,7 @@ suspending the device are satisfied) and to queue up a suspend request for the device in that case. If there is no idle callback, or if the callback returns 0, then the PM core will attempt to carry out a runtime suspend of the device, also respecting devices configured for autosuspend. In essence this means a -call to pm_runtime_autosuspend() (do note that drivers needs to update the +call to __pm_runtime_autosuspend() (do note that drivers needs to update the device last busy mark, pm_runtime_mark_last_busy(), to control the delay under this circumstance). To prevent this (for example, if the callback routine has started a delayed suspend), the routine must return a non-zero value. Negative @@ -396,10 +396,9 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: nonzero, increment the counter and return 1; otherwise return 0 without changing the counter - `int pm_runtime_get_if_active(struct device *dev, bool ign_usage_count);` + `int pm_runtime_get_if_active(struct device *dev);` - return -EINVAL if 'power.disable_depth' is nonzero; otherwise, if the - runtime PM status is RPM_ACTIVE, and either ign_usage_count is true - or the device's usage_count is non-zero, increment the counter and + runtime PM status is RPM_ACTIVE, increment the counter and return 1; otherwise return 0 without changing the counter `void pm_runtime_put_noidle(struct device *dev);` @@ -410,6 +409,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: pm_request_idle(dev) and return its result `int pm_runtime_put_autosuspend(struct device *dev);` + - does the same as __pm_runtime_put_autosuspend() for now, but in the + future, will also call pm_runtime_mark_last_busy() as well, DO NOT USE! + + `int __pm_runtime_put_autosuspend(struct device *dev);` - decrement the device's usage counter; if the result is 0 then run pm_request_autosuspend(dev) and return its result @@ -540,6 +543,7 @@ It is safe to execute the following helper functions from interrupt context: - pm_runtime_put_noidle() - pm_runtime_put() - pm_runtime_put_autosuspend() +- __pm_runtime_put_autosuspend() - pm_runtime_enable() - pm_suspend_ignore_children() - pm_runtime_set_active() @@ -730,6 +734,7 @@ out the following operations: for it, respectively. 7. Generic subsystem callbacks +============================== Subsystems may wish to conserve code space by using the set of generic power management callbacks provided by the PM core, defined in @@ -865,9 +870,9 @@ automatically be delayed until the desired period of inactivity has elapsed. Inactivity is determined based on the power.last_busy field. Drivers should call pm_runtime_mark_last_busy() to update this field after carrying out I/O, -typically just before calling pm_runtime_put_autosuspend(). The desired length -of the inactivity period is a matter of policy. Subsystems can set this length -initially by calling pm_runtime_set_autosuspend_delay(), but after device +typically just before calling __pm_runtime_put_autosuspend(). The desired +length of the inactivity period is a matter of policy. Subsystems can set this +length initially by calling pm_runtime_set_autosuspend_delay(), but after device registration the length should be controlled by user space, using the /sys/devices/.../power/autosuspend_delay_ms attribute. @@ -878,7 +883,7 @@ instead of the non-autosuspend counterparts:: Instead of: pm_runtime_suspend use: pm_runtime_autosuspend; Instead of: pm_schedule_suspend use: pm_request_autosuspend; - Instead of: pm_runtime_put use: pm_runtime_put_autosuspend; + Instead of: pm_runtime_put use: __pm_runtime_put_autosuspend; Instead of: pm_runtime_put_sync use: pm_runtime_put_sync_autosuspend. Drivers may also continue to use the non-autosuspend helper functions; they @@ -917,7 +922,7 @@ Here is a schematic pseudo-code example:: lock(&foo->private_lock); if (--foo->num_pending_requests == 0) { pm_runtime_mark_last_busy(&foo->dev); - pm_runtime_put_autosuspend(&foo->dev); + __pm_runtime_put_autosuspend(&foo->dev); } else { foo_process_next_request(foo); } diff --git a/Documentation/power/suspend-and-interrupts.rst b/Documentation/power/suspend-and-interrupts.rst index dfbace2f4600c8..f588feeecad0fc 100644 --- a/Documentation/power/suspend-and-interrupts.rst +++ b/Documentation/power/suspend-and-interrupts.rst @@ -78,7 +78,7 @@ handling the given IRQ as a system wakeup interrupt line and disable_irq_wake() turns that logic off. Calling enable_irq_wake() causes suspend_device_irqs() to treat the given IRQ -in a special way. Namely, the IRQ remains enabled, by on the first interrupt +in a special way. Namely, the IRQ remains enabled, but on the first interrupt it will be disabled, marked as pending and "suspended" so that it will be re-enabled by resume_device_irqs() during the subsequent system resume. Also the PM core is notified about the event which causes the system suspend in diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index ca611c9c2d1e67..7ef8de58f7f892 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -30,7 +30,7 @@ you probably needn't concern yourself with pcmciautils. Program Minimal version Command to check the version ====================== =============== ======================================== GNU C 5.1 gcc --version -Clang/LLVM (optional) 11.0.0 clang --version +Clang/LLVM (optional) 13.0.1 clang --version Rust (optional) 1.76.0 rustc --version bindgen (optional) 0.65.1 bindgen --version GNU make 3.82 make --version diff --git a/Documentation/process/handling-regressions.rst b/Documentation/process/handling-regressions.rst index 5d3c3de3f4ecbd..ce6753a674f336 100644 --- a/Documentation/process/handling-regressions.rst +++ b/Documentation/process/handling-regressions.rst @@ -27,11 +27,11 @@ The important bits (aka "The TL;DR") is optional, but recommended): * For mailed reports, check if the reporter included a line like ``#regzbot - introduced v5.13..v5.14-rc1``. If not, send a reply (with the regressions + introduced: v5.13..v5.14-rc1``. If not, send a reply (with the regressions list in CC) containing a paragraph like the following, which tells regzbot when the issue started to happen:: - #regzbot ^introduced 1f2e3d4c5b6a + #regzbot ^introduced: 1f2e3d4c5b6a * When forwarding reports from a bug tracker to the regressions list (see above), include a paragraph like the following:: @@ -79,7 +79,7 @@ When doing either, consider making the Linux kernel regression tracking bot "regzbot" immediately start tracking the issue: * For mailed reports, check if the reporter included a "regzbot command" like - ``#regzbot introduced 1f2e3d4c5b6a``. If not, send a reply (with the + ``#regzbot introduced: 1f2e3d4c5b6a``. If not, send a reply (with the regressions list in CC) with a paragraph like the following::: #regzbot ^introduced: v5.13..v5.14-rc1 @@ -398,9 +398,9 @@ By using a 'regzbot command' in a direct or indirect reply to the mail with the regression report. These commands need to be in their own paragraph (IOW: they need to be separated from the rest of the mail using blank lines). -One such command is ``#regzbot introduced <version or commit>``, which makes +One such command is ``#regzbot introduced: <version or commit>``, which makes regzbot consider your mail as a regressions report added to the tracking, as -already described above; ``#regzbot ^introduced <version or commit>`` is another +already described above; ``#regzbot ^introduced: <version or commit>`` is another such command, which makes regzbot consider the parent mail as a report for a regression which it starts to track. @@ -432,7 +432,7 @@ or itself is a reply to that mail: * Mark a regression as fixed by a commit that is heading upstream or already landed:: - #regzbot fixed-by: 1f2e3d4c5d + #regzbot fix: 1f2e3d4c5d * Mark a regression as a duplicate of another one already tracked by regzbot:: diff --git a/Documentation/rust/arch-support.rst b/Documentation/rust/arch-support.rst index 73203ba1e9011e..5c4fa9f5d1cdb7 100644 --- a/Documentation/rust/arch-support.rst +++ b/Documentation/rust/arch-support.rst @@ -15,6 +15,7 @@ support corresponds to ``S`` values in the ``MAINTAINERS`` file. ============= ================ ============================================== Architecture Level of support Constraints ============= ================ ============================================== +``arm64`` Maintained Little Endian only. ``loongarch`` Maintained - ``um`` Maintained ``x86_64`` only. ``x86`` Maintained ``x86_64`` only. diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst index cd421856409e65..2d2998faff62b9 100644 --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst @@ -3864,14 +3864,16 @@ corresponding destructor. And next, set suspend/resume callbacks to the pci_driver:: - static SIMPLE_DEV_PM_OPS(snd_my_pm_ops, mychip_suspend, mychip_resume); + static DEFINE_SIMPLE_DEV_PM_OPS(snd_my_pm_ops, mychip_suspend, mychip_resume); static struct pci_driver driver = { .name = KBUILD_MODNAME, .id_table = snd_my_ids, .probe = snd_my_probe, .remove = snd_my_remove, - .driver.pm = &snd_my_pm_ops, + .driver = { + .pm = &snd_my_pm_ops, + }, }; Module Parameters diff --git a/Documentation/spi/spi-summary.rst b/Documentation/spi/spi-summary.rst index 33f05901ccf37b..546de37d6caf10 100644 --- a/Documentation/spi/spi-summary.rst +++ b/Documentation/spi/spi-summary.rst @@ -9,7 +9,7 @@ What is SPI? The "Serial Peripheral Interface" (SPI) is a synchronous four wire serial link used to connect microcontrollers to sensors, memory, and peripherals. It's a simple "de facto" standard, not complicated enough to acquire a -standardization body. SPI uses a master/slave configuration. +standardization body. SPI uses a host/target configuration. The three signal wires hold a clock (SCK, often on the order of 10 MHz), and parallel data lines with "Master Out, Slave In" (MOSI) or "Master In, @@ -19,14 +19,14 @@ commonly used. Each clock cycle shifts data out and data in; the clock doesn't cycle except when there is a data bit to shift. Not all data bits are used though; not every protocol uses those full duplex capabilities. -SPI masters use a fourth "chip select" line to activate a given SPI slave +SPI hosts use a fourth "chip select" line to activate a given SPI target device, so those three signal wires may be connected to several chips -in parallel. All SPI slaves support chipselects; they are usually active -low signals, labeled nCSx for slave 'x' (e.g. nCS0). Some devices have -other signals, often including an interrupt to the master. +in parallel. All SPI targets support chipselects; they are usually active +low signals, labeled nCSx for target 'x' (e.g. nCS0). Some devices have +other signals, often including an interrupt to the host. Unlike serial busses like USB or SMBus, even low level protocols for -SPI slave functions are usually not interoperable between vendors +SPI target functions are usually not interoperable between vendors (except for commodities like SPI memory chips). - SPI may be used for request/response style device protocols, as with @@ -43,10 +43,10 @@ SPI slave functions are usually not interoperable between vendors - Sometimes SPI is used to daisy-chain devices, like shift registers. -In the same way, SPI slaves will only rarely support any kind of automatic -discovery/enumeration protocol. The tree of slave devices accessible from -a given SPI master will normally be set up manually, with configuration -tables. +In the same way, SPI targets will only rarely support any kind of automatic +discovery/enumeration protocol. The tree of target devices accessible from +a given SPI host controller will normally be set up manually, with +configuration tables. SPI is only one of the names used by such four-wire protocols, and most controllers have no problem handling "MicroWire" (think of it as @@ -62,8 +62,8 @@ course they won't handle full duplex transfers. You may find such chips described as using "three wire" signaling: SCK, data, nCSx. (That data line is sometimes called MOMI or SISO.) -Microcontrollers often support both master and slave sides of the SPI -protocol. This document (and Linux) supports both the master and slave +Microcontrollers often support both host and target sides of the SPI +protocol. This document (and Linux) supports both the host and target sides of SPI interactions. @@ -75,7 +75,7 @@ protocol supported by every MMC or SD memory card. (The older "DataFlash" cards, predating MMC cards but using the same connectors and card shape, support only SPI.) Some PC hardware uses SPI flash for BIOS code. -SPI slave chips range from digital/analog converters used for analog +SPI target chips range from digital/analog converters used for analog sensors and codecs, to memory, to peripherals like USB controllers or Ethernet adapters; and more. @@ -118,8 +118,8 @@ starting low (CPOL=0) and data stabilized for sampling during the trailing clock edge (CPHA=1), that's SPI mode 1. Note that the clock mode is relevant as soon as the chipselect goes -active. So the master must set the clock to inactive before selecting -a slave, and the slave can tell the chosen polarity by sampling the +active. So the host must set the clock to inactive before selecting +a target, and the target can tell the chosen polarity by sampling the clock level when its select line goes active. That's why many devices support for example both modes 0 and 3: they don't care about polarity, and always clock data in/out on rising clock edges. @@ -142,13 +142,13 @@ There are two types of SPI driver, here called: Controller drivers ... controllers may be built into System-On-Chip - processors, and often support both Master and Slave roles. + processors, and often support both Controller and target roles. These drivers touch hardware registers and may use DMA. Or they can be PIO bitbangers, needing just GPIO pins. Protocol drivers ... these pass messages through the controller - driver to communicate with a Slave or Master device on the + driver to communicate with a target or Controller device on the other side of an SPI link. So for example one protocol driver might talk to the MTD layer to export @@ -179,22 +179,22 @@ shows up in sysfs in several locations:: /sys/bus/spi/drivers/D ... driver for one or more spi*.* devices /sys/class/spi_master/spiB ... symlink to a logical node which could hold - class related state for the SPI master controller managing bus "B". + class related state for the SPI host controller managing bus "B". All spiB.* devices share one physical SPI bus segment, with SCLK, MOSI, and MISO. /sys/devices/.../CTLR/slave ... virtual file for (un)registering the - slave device for an SPI slave controller. - Writing the driver name of an SPI slave handler to this file - registers the slave device; writing "(null)" unregisters the slave + target device for an SPI target controller. + Writing the driver name of an SPI target handler to this file + registers the target device; writing "(null)" unregisters the target device. - Reading from this file shows the name of the slave device ("(null)" + Reading from this file shows the name of the target device ("(null)" if not registered). /sys/class/spi_slave/spiB ... symlink to a logical node which could hold - class related state for the SPI slave controller on bus "B". When + class related state for the SPI target controller on bus "B". When registered, a single spiB.* device is present here, possible sharing - the physical SPI bus segment with other SPI slave devices. + the physical SPI bus segment with other SPI target devices. At this time, the only class-specific state is the bus number ("B" in "spiB"), so those /sys/class entries are only useful to quickly identify busses. @@ -270,10 +270,10 @@ same SOC controller is used. For example, on one board SPI might use an external clock, where another derives the SPI clock from current settings of some master clock. -Declare Slave Devices -^^^^^^^^^^^^^^^^^^^^^ +Declare target Devices +^^^^^^^^^^^^^^^^^^^^^^ -The second kind of information is a list of what SPI slave devices exist +The second kind of information is a list of what SPI target devices exist on the target board, often with some board-specific data needed for the driver to work correctly. @@ -316,7 +316,7 @@ sharing a bus with a device that interprets chipselect "backwards" is not possible until the infrastructure knows how to deselect it. Then your board initialization code would register that table with the SPI -infrastructure, so that it's available later when the SPI master controller +infrastructure, so that it's available later when the SPI host controller driver is registered:: spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); @@ -469,39 +469,39 @@ routines are available to allocate and zero-initialize an spi_message with several transfers. -How do I write an "SPI Master Controller Driver"? +How do I write an "SPI Controller Driver"? ------------------------------------------------- An SPI controller will probably be registered on the platform_bus; write a driver to bind to the device, whichever bus is involved. -The main task of this type of driver is to provide an "spi_master". -Use spi_alloc_master() to allocate the master, and spi_master_get_devdata() -to get the driver-private data allocated for that device. +The main task of this type of driver is to provide an "spi_controller". +Use spi_alloc_host() to allocate the host controller, and +spi_controller_get_devdata() to get the driver-private data allocated for that +device. :: - struct spi_master *master; + struct spi_controller *ctlr; struct CONTROLLER *c; - master = spi_alloc_master(dev, sizeof *c); - if (!master) + ctlr = spi_alloc_host(dev, sizeof *c); + if (!ctlr) return -ENODEV; - c = spi_master_get_devdata(master); + c = spi_controller_get_devdata(ctlr); -The driver will initialize the fields of that spi_master, including the -bus number (maybe the same as the platform device ID) and three methods -used to interact with the SPI core and SPI protocol drivers. It will -also initialize its own internal state. (See below about bus numbering -and those methods.) +The driver will initialize the fields of that spi_controller, including the bus +number (maybe the same as the platform device ID) and three methods used to +interact with the SPI core and SPI protocol drivers. It will also initialize +its own internal state. (See below about bus numbering and those methods.) -After you initialize the spi_master, then use spi_register_master() to +After you initialize the spi_controller, then use spi_register_controller() to publish it to the rest of the system. At that time, device nodes for the controller and any predeclared spi devices will be made available, and the driver model core will take care of binding them to drivers. -If you need to remove your SPI controller driver, spi_unregister_master() -will reverse the effect of spi_register_master(). +If you need to remove your SPI controller driver, spi_unregister_controller() +will reverse the effect of spi_register_controller(). Bus Numbering @@ -519,49 +519,49 @@ then be replaced by a dynamically assigned number. You'd then need to treat this as a non-static configuration (see above). -SPI Master Methods -^^^^^^^^^^^^^^^^^^ +SPI Host Controller Methods +^^^^^^^^^^^^^^^^^^^^^^^^^^^ -``master->setup(struct spi_device *spi)`` +``ctlr->setup(struct spi_device *spi)`` This sets up the device clock rate, SPI mode, and word sizes. Drivers may change the defaults provided by board_info, and then call spi_setup(spi) to invoke this routine. It may sleep. - Unless each SPI slave has its own configuration registers, don't + Unless each SPI target has its own configuration registers, don't change them right away ... otherwise drivers could corrupt I/O that's in progress for other SPI devices. .. note:: BUG ALERT: for some reason the first version of - many spi_master drivers seems to get this wrong. + many spi_controller drivers seems to get this wrong. When you code setup(), ASSUME that the controller is actively processing transfers for another device. -``master->cleanup(struct spi_device *spi)`` +``ctlr->cleanup(struct spi_device *spi)`` Your controller driver may use spi_device.controller_state to hold state it dynamically associates with that device. If you do that, be sure to provide the cleanup() method to free that state. -``master->prepare_transfer_hardware(struct spi_master *master)`` +``ctlr->prepare_transfer_hardware(struct spi_controller *ctlr)`` This will be called by the queue mechanism to signal to the driver that a message is coming in soon, so the subsystem requests the driver to prepare the transfer hardware by issuing this call. This may sleep. -``master->unprepare_transfer_hardware(struct spi_master *master)`` +``ctlr->unprepare_transfer_hardware(struct spi_controller *ctlr)`` This will be called by the queue mechanism to signal to the driver that there are no more messages pending in the queue and it may relax the hardware (e.g. by power management calls). This may sleep. -``master->transfer_one_message(struct spi_master *master, struct spi_message *mesg)`` +``ctlr->transfer_one_message(struct spi_controller *ctlr, struct spi_message *mesg)`` The subsystem calls the driver to transfer a single message while queuing transfers that arrive in the meantime. When the driver is finished with this message, it must call spi_finalize_current_message() so the subsystem can issue the next message. This may sleep. -``master->transfer_one(struct spi_master *master, struct spi_device *spi, struct spi_transfer *transfer)`` +``ctrl->transfer_one(struct spi_controller *ctlr, struct spi_device *spi, struct spi_transfer *transfer)`` The subsystem calls the driver to transfer a single transfer while queuing transfers that arrive in the meantime. When the driver is finished with this transfer, it must call @@ -576,15 +576,15 @@ SPI Master Methods * 0: transfer is finished * 1: transfer is still in progress -``master->set_cs_timing(struct spi_device *spi, u8 setup_clk_cycles, u8 hold_clk_cycles, u8 inactive_clk_cycles)`` - This method allows SPI client drivers to request SPI master controller +``ctrl->set_cs_timing(struct spi_device *spi, u8 setup_clk_cycles, u8 hold_clk_cycles, u8 inactive_clk_cycles)`` + This method allows SPI client drivers to request SPI host controller for configuring device specific CS setup, hold and inactive timing requirements. Deprecated Methods ^^^^^^^^^^^^^^^^^^ -``master->transfer(struct spi_device *spi, struct spi_message *message)`` +``ctrl->transfer(struct spi_device *spi, struct spi_message *message)`` This must not sleep. Its responsibility is to arrange that the transfer happens and its complete() callback is issued. The two will normally happen later, after other transfers complete, and diff --git a/Documentation/tools/rtla/common_timerlat_options.rst b/Documentation/tools/rtla/common_timerlat_options.rst index 88506b397c2dd6..d3255ed70195fa 100644 --- a/Documentation/tools/rtla/common_timerlat_options.rst +++ b/Documentation/tools/rtla/common_timerlat_options.rst @@ -33,3 +33,9 @@ to wait on the timerlat_fd. Once the workload is awakes, it goes to sleep again adding so the measurement for the kernel-to-user and user-to-kernel to the tracer output. + +**-U**, **--user-load** + + Set timerlat to run without workload, waiting for the user to dispatch a per-cpu + task that waits for a new period on the tracing/osnoise/per_cpu/cpu$ID/timerlat_fd. + See linux/tools/rtla/sample/timerlat_load.py for an example of user-load code. diff --git a/Documentation/trace/fprobetrace.rst b/Documentation/trace/fprobetrace.rst index e35e6b18df40cd..0f187e3796e4b4 100644 --- a/Documentation/trace/fprobetrace.rst +++ b/Documentation/trace/fprobetrace.rst @@ -70,6 +70,14 @@ Synopsis of fprobe-events For the details of TYPE, see :ref:`kprobetrace documentation <kprobetrace_types>`. +Function arguments at exit +-------------------------- +Function arguments can be accessed at exit probe using $arg<N> fetcharg. This +is useful to record the function parameter and return value at once, and +trace the difference of structure fields (for debuging a function whether it +correctly updates the given data structure or not) +See the :ref:`sample<fprobetrace_exit_args_sample>` below for how it works. + BTF arguments ------------- BTF (BPF Type Format) argument allows user to trace function and tracepoint @@ -218,3 +226,26 @@ traceprobe event, you can trace that field as below. <idle>-0 [000] d..3. 5606.690317: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="kworker/0:1" usage=1 start_time=137000000 kworker/0:1-14 [000] d..3. 5606.690339: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0 <idle>-0 [000] d..3. 5606.692368: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="kworker/0:1" usage=1 start_time=137000000 + +.. _fprobetrace_exit_args_sample: + +The return probe allows us to access the results of some functions, which returns +the error code and its results are passed via function parameter, such as an +structure-initialization function. + +For example, vfs_open() will link the file structure to the inode and update +mode. You can trace that changes with return probe. +:: + + # echo 'f vfs_open mode=file->f_mode:x32 inode=file->f_inode:x64' >> dynamic_events + # echo 'f vfs_open%%return mode=file->f_mode:x32 inode=file->f_inode:x64' >> dynamic_events + # echo 1 > events/fprobes/enable + # cat trace + sh-131 [006] ...1. 1945.714346: vfs_open__entry: (vfs_open+0x4/0x40) mode=0x2 inode=0x0 + sh-131 [006] ...1. 1945.714358: vfs_open__exit: (do_open+0x274/0x3d0 <- vfs_open) mode=0x4d801e inode=0xffff888008470168 + cat-143 [007] ...1. 1945.717949: vfs_open__entry: (vfs_open+0x4/0x40) mode=0x1 inode=0x0 + cat-143 [007] ...1. 1945.717956: vfs_open__exit: (do_open+0x274/0x3d0 <- vfs_open) mode=0x4a801d inode=0xffff888005f78d28 + cat-143 [007] ...1. 1945.720616: vfs_open__entry: (vfs_open+0x4/0x40) mode=0x1 inode=0x0 + cat-143 [007] ...1. 1945.728263: vfs_open__exit: (do_open+0x274/0x3d0 <- vfs_open) mode=0xa800d inode=0xffff888004ada8d8 + +You can see the `file::f_mode` and `file::f_inode` are upated in `vfs_open()`. diff --git a/Documentation/trace/kprobetrace.rst b/Documentation/trace/kprobetrace.rst index bf9cecb69fc9e3..a49662ccd53cda 100644 --- a/Documentation/trace/kprobetrace.rst +++ b/Documentation/trace/kprobetrace.rst @@ -70,6 +70,15 @@ Synopsis of kprobe_events (\*3) this is useful for fetching a field of data structures. (\*4) "u" means user-space dereference. See :ref:`user_mem_access`. +Function arguments at kretprobe +------------------------------- +Function arguments can be accessed at kretprobe using $arg<N> fetcharg. This +is useful to record the function parameter and return value at once, and +trace the difference of structure fields (for debuging a function whether it +correctly updates the given data structure or not). +See the :ref:`sample<fprobetrace_exit_args_sample>` in fprobe event for how +it works. + .. _kprobetrace_types: Types diff --git a/Documentation/trace/user_events.rst b/Documentation/trace/user_events.rst index d8f12442aaa6bd..1d5a7626e6a6c9 100644 --- a/Documentation/trace/user_events.rst +++ b/Documentation/trace/user_events.rst @@ -92,6 +92,24 @@ The following flags are currently supported. process closes or unregisters the event. Requires CAP_PERFMON otherwise -EPERM is returned. ++ USER_EVENT_REG_MULTI_FORMAT: The event can contain multiple formats. This + allows programs to prevent themselves from being blocked when their event + format changes and they wish to use the same name. When this flag is used the + tracepoint name will be in the new format of "name.unique_id" vs the older + format of "name". A tracepoint will be created for each unique pair of name + and format. This means if several processes use the same name and format, + they will use the same tracepoint. If yet another process uses the same name, + but a different format than the other processes, it will use a different + tracepoint with a new unique id. Recording programs need to scan tracefs for + the various different formats of the event name they are interested in + recording. The system name of the tracepoint will also use "user_events_multi" + instead of "user_events". This prevents single-format event names conflicting + with any multi-format event names within tracefs. The unique_id is output as + a hex string. Recording programs should ensure the tracepoint name starts with + the event name they registered and has a suffix that starts with . and only + has hex characters. For example to find all versions of the event "test" you + can use the regex "^test\.[0-9a-fA-F]+$". + Upon successful registration the following is set. + write_index: The index to use for this file descriptor that represents this @@ -106,6 +124,9 @@ or perf record -e user_events:[name] when attaching/recording. **NOTE:** The event subsystem name by default is "user_events". Callers should not assume it will always be "user_events". Operators reserve the right in the future to change the subsystem name per-process to accommodate event isolation. +In addition if the USER_EVENT_REG_MULTI_FORMAT flag is used the tracepoint name +will have a unique id appended to it and the system name will be +"user_events_multi" as described above. Command Format ^^^^^^^^^^^^^^ @@ -156,7 +177,11 @@ to request deletes than the one used for registration due to this. to the event. If programs do not want auto-delete, they must use the USER_EVENT_REG_PERSIST flag when registering the event. Once that flag is used the event exists until DIAG_IOCSDEL is invoked. Both register and delete of an -event that persists requires CAP_PERFMON, otherwise -EPERM is returned. +event that persists requires CAP_PERFMON, otherwise -EPERM is returned. When +there are multiple formats of the same event name, all events with the same +name will be attempted to be deleted. If only a specific version is wanted to +be deleted then the /sys/kernel/tracing/dynamic_events file should be used for +that specific format of the event. Unregistering ------------- diff --git a/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst b/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst index 17b9949d9b4357..da2745464ece45 100644 --- a/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst +++ b/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst @@ -344,7 +344,7 @@ debugfs接口 :ref:`sysfs接口<sysfs_interface>`。 DAMON导出了八个文件, ``attrs``, ``target_ids``, ``init_regions``, -``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` 和 +``schemes``, ``monitor_on_DEPRECATED``, ``kdamond_pid``, ``mk_contexts`` 和 ``rm_contexts`` under its debugfs directory, ``<debugfs>/damon/``. @@ -521,15 +521,15 @@ DAMON导出了八个文件, ``attrs``, ``target_ids``, ``init_regions``, 开关 ---- -除非你明确地启动监测，否则如上所述的文件设置不会产生效果。你可以通过写入和读取 ``monitor_on`` +除非你明确地启动监测，否则如上所述的文件设置不会产生效果。你可以通过写入和读取 ``monitor_on_DEPRECATED`` 文件来启动、停止和检查监测的当前状态。写入 ``on`` 该文件可以启动对有属性的目标的监测。写入 ``off`` 该文件则停止这些目标。如果每个目标进程被终止，DAMON也会停止。下面的示例命令开启、关 闭和检查DAMON的状态:: # cd <debugfs>/damon - # echo on > monitor_on - # echo off > monitor_on - # cat monitor_on + # echo on > monitor_on_DEPRECATED + # echo off > monitor_on_DEPRECATED + # cat monitor_on_DEPRECATED off 请注意，当监测开启时，你不能写到上述的debugfs文件。如果你在DAMON运行时写到这些文件，将会返 @@ -543,11 +543,11 @@ DAMON通过一个叫做kdamond的内核线程来进行请求监测。你可以 得该线程的 ``pid`` 。当监测被 ``关闭`` 时，读取该文件不会返回任何信息:: # cd <debugfs>/damon - # cat monitor_on + # cat monitor_on_DEPRECATED off # cat kdamond_pid none - # echo on > monitor_on + # echo on > monitor_on_DEPRECATED # cat kdamond_pid 18594 @@ -574,7 +574,7 @@ DAMON通过一个叫做kdamond的内核线程来进行请求监测。你可以 # ls foo # ls: cannot access 'foo': No such file or directory -注意， ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on`` 文件只在根目录下。 +注意， ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on_DEPRECATED`` 文件只在根目录下。 监测结果的监测点 @@ -583,9 +583,9 @@ DAMON通过一个叫做kdamond的内核线程来进行请求监测。你可以 DAMON通过一个tracepoint ``damon:damon_aggregated`` 提供监测结果. 当监测开启时，你可 以记录追踪点事件，并使用追踪点支持工具如perf显示结果。比如说:: - # echo on > monitor_on + # echo on > monitor_on_DEPRECATED # perf record -e damon:damon_aggregated & # sleep 5 # kill 9 $(pidof perf) - # echo off > monitor_on + # echo off > monitor_on_DEPRECATED # perf script diff --git a/Documentation/translations/zh_CN/dev-tools/kasan.rst b/Documentation/translations/zh_CN/dev-tools/kasan.rst index 8fdb20c9665b4b..2b1e8f74904b01 100644 --- a/Documentation/translations/zh_CN/dev-tools/kasan.rst +++ b/Documentation/translations/zh_CN/dev-tools/kasan.rst @@ -137,7 +137,7 @@ KASAN受到通用 ``panic_on_warn`` 命令行参数的影响。当它被启用 典型的KASAN报告如下所示:: ================================================================== - BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [test_kasan] + BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [kasan_test] Write of size 1 at addr ffff8801f44ec37b by task insmod/2760 CPU: 1 PID: 2760 Comm: insmod Not tainted 4.19.0-rc3+ #698 @@ -147,8 +147,8 @@ KASAN受到通用 ``panic_on_warn`` 命令行参数的影响。当它被启用 print_address_description+0x73/0x280 kasan_report+0x144/0x187 __asan_report_store1_noabort+0x17/0x20 - kmalloc_oob_right+0xa8/0xbc [test_kasan] - kmalloc_tests_init+0x16/0x700 [test_kasan] + kmalloc_oob_right+0xa8/0xbc [kasan_test] + kmalloc_tests_init+0x16/0x700 [kasan_test] do_one_initcall+0xa5/0x3ae do_init_module+0x1b6/0x547 load_module+0x75df/0x8070 @@ -168,8 +168,8 @@ KASAN受到通用 ``panic_on_warn`` 命令行参数的影响。当它被启用 save_stack+0x43/0xd0 kasan_kmalloc+0xa7/0xd0 kmem_cache_alloc_trace+0xe1/0x1b0 - kmalloc_oob_right+0x56/0xbc [test_kasan] - kmalloc_tests_init+0x16/0x700 [test_kasan] + kmalloc_oob_right+0x56/0xbc [kasan_test] + kmalloc_tests_init+0x16/0x700 [kasan_test] do_one_initcall+0xa5/0x3ae do_init_module+0x1b6/0x547 load_module+0x75df/0x8070 @@ -421,15 +421,15 @@ KASAN连接到vmap基础架构以懒清理未使用的影子内存。 当由于 ``kmalloc`` 失败而导致测试失败时:: - # kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163 + # kmalloc_large_oob_right: ASSERTION FAILED at mm/kasan/kasan_test.c:245 Expected ptr is not null, but is - not ok 4 - kmalloc_large_oob_right + not ok 5 - kmalloc_large_oob_right 当由于缺少KASAN报告而导致测试失败时:: - # kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:974 + # kmalloc_double_kzfree: EXPECTATION FAILED at mm/kasan/kasan_test.c:709 KASAN failure expected in "kfree_sensitive(ptr)", but none occurred - not ok 44 - kmalloc_double_kzfree + not ok 28 - kmalloc_double_kzfree 最后打印所有KASAN测试的累积状态。成功:: @@ -445,7 +445,7 @@ KASAN连接到vmap基础架构以懒清理未使用的影子内存。 1. 可加载模块 启用 ``CONFIG_KUNIT`` 后，KASAN-KUnit测试可以构建为可加载模块，并通过使用 - ``insmod`` 或 ``modprobe`` 加载 ``test_kasan.ko`` 来运行。 + ``insmod`` 或 ``modprobe`` 加载 ``kasan_test.ko`` 来运行。 2. 内置 diff --git a/Documentation/translations/zh_CN/power/opp.rst b/Documentation/translations/zh_CN/power/opp.rst index 8d6e3f6f62024e..7470fa2d4c43af 100644 --- a/Documentation/translations/zh_CN/power/opp.rst +++ b/Documentation/translations/zh_CN/power/opp.rst @@ -274,7 +274,7 @@ dev_pm_opp_get_opp_count { /* 做一些事情 */ num_available = dev_pm_opp_get_opp_count(dev); - speeds = kzalloc(sizeof(u32) * num_available, GFP_KERNEL); + speeds = kcalloc(num_available, sizeof(u32), GFP_KERNEL); /* 按升序填充表 */ freq = 0; while (!IS_ERR(opp = dev_pm_opp_find_freq_ceil(dev, &freq))) { diff --git a/Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst b/Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst index 6dee719a32ea61..7464279f9b7de0 100644 --- a/Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst +++ b/Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst @@ -344,7 +344,7 @@ debugfs接口 :ref:`sysfs接口<sysfs_interface>`。 DAMON導出了八個文件, ``attrs``, ``target_ids``, ``init_regions``, -``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` 和 +``schemes``, ``monitor_on_DEPRECATED``, ``kdamond_pid``, ``mk_contexts`` 和 ``rm_contexts`` under its debugfs directory, ``<debugfs>/damon/``. @@ -521,15 +521,15 @@ DAMON導出了八個文件, ``attrs``, ``target_ids``, ``init_regions``, 開關 ---- -除非你明確地啓動監測，否則如上所述的文件設置不會產生效果。你可以通過寫入和讀取 ``monitor_on`` +除非你明確地啓動監測，否則如上所述的文件設置不會產生效果。你可以通過寫入和讀取 ``monitor_on_DEPRECATED`` 文件來啓動、停止和檢查監測的當前狀態。寫入 ``on`` 該文件可以啓動對有屬性的目標的監測。寫入 ``off`` 該文件則停止這些目標。如果每個目標進程被終止，DAMON也會停止。下面的示例命令開啓、關 閉和檢查DAMON的狀態:: # cd <debugfs>/damon - # echo on > monitor_on - # echo off > monitor_on - # cat monitor_on + # echo on > monitor_on_DEPRECATED + # echo off > monitor_on_DEPRECATED + # cat monitor_on_DEPRECATED off 請注意，當監測開啓時，你不能寫到上述的debugfs文件。如果你在DAMON運行時寫到這些文件，將會返 @@ -543,11 +543,11 @@ DAMON通過一個叫做kdamond的內核線程來進行請求監測。你可以 得該線程的 ``pid`` 。當監測被 ``關閉`` 時，讀取該文件不會返回任何信息:: # cd <debugfs>/damon - # cat monitor_on + # cat monitor_on_DEPRECATED off # cat kdamond_pid none - # echo on > monitor_on + # echo on > monitor_on_DEPRECATED # cat kdamond_pid 18594 @@ -574,7 +574,7 @@ DAMON通過一個叫做kdamond的內核線程來進行請求監測。你可以 # ls foo # ls: cannot access 'foo': No such file or directory -注意， ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on`` 文件只在根目錄下。 +注意， ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on_DEPRECATED`` 文件只在根目錄下。 監測結果的監測點 @@ -583,10 +583,10 @@ DAMON通過一個叫做kdamond的內核線程來進行請求監測。你可以 DAMON通過一個tracepoint ``damon:damon_aggregated`` 提供監測結果. 當監測開啓時，你可 以記錄追蹤點事件，並使用追蹤點支持工具如perf顯示結果。比如說:: - # echo on > monitor_on + # echo on > monitor_on_DEPRECATED # perf record -e damon:damon_aggregated & # sleep 5 # kill 9 $(pidof perf) - # echo off > monitor_on + # echo off > monitor_on_DEPRECATED # perf script diff --git a/Documentation/translations/zh_TW/dev-tools/kasan.rst b/Documentation/translations/zh_TW/dev-tools/kasan.rst index 979eb84bc58f1a..ed342e67d8ed02 100644 --- a/Documentation/translations/zh_TW/dev-tools/kasan.rst +++ b/Documentation/translations/zh_TW/dev-tools/kasan.rst @@ -137,7 +137,7 @@ KASAN受到通用 ``panic_on_warn`` 命令行參數的影響。當它被啓用 典型的KASAN報告如下所示:: ================================================================== - BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [test_kasan] + BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [kasan_test] Write of size 1 at addr ffff8801f44ec37b by task insmod/2760 CPU: 1 PID: 2760 Comm: insmod Not tainted 4.19.0-rc3+ #698 @@ -147,8 +147,8 @@ KASAN受到通用 ``panic_on_warn`` 命令行參數的影響。當它被啓用 print_address_description+0x73/0x280 kasan_report+0x144/0x187 __asan_report_store1_noabort+0x17/0x20 - kmalloc_oob_right+0xa8/0xbc [test_kasan] - kmalloc_tests_init+0x16/0x700 [test_kasan] + kmalloc_oob_right+0xa8/0xbc [kasan_test] + kmalloc_tests_init+0x16/0x700 [kasan_test] do_one_initcall+0xa5/0x3ae do_init_module+0x1b6/0x547 load_module+0x75df/0x8070 @@ -168,8 +168,8 @@ KASAN受到通用 ``panic_on_warn`` 命令行參數的影響。當它被啓用 save_stack+0x43/0xd0 kasan_kmalloc+0xa7/0xd0 kmem_cache_alloc_trace+0xe1/0x1b0 - kmalloc_oob_right+0x56/0xbc [test_kasan] - kmalloc_tests_init+0x16/0x700 [test_kasan] + kmalloc_oob_right+0x56/0xbc [kasan_test] + kmalloc_tests_init+0x16/0x700 [kasan_test] do_one_initcall+0xa5/0x3ae do_init_module+0x1b6/0x547 load_module+0x75df/0x8070 @@ -421,15 +421,15 @@ KASAN連接到vmap基礎架構以懶清理未使用的影子內存。 當由於 ``kmalloc`` 失敗而導致測試失敗時:: - # kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163 + # kmalloc_large_oob_right: ASSERTION FAILED at mm/kasan/kasan_test.c:245 Expected ptr is not null, but is - not ok 4 - kmalloc_large_oob_right + not ok 5 - kmalloc_large_oob_right 當由於缺少KASAN報告而導致測試失敗時:: - # kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:974 + # kmalloc_double_kzfree: EXPECTATION FAILED at mm/kasan/kasan_test.c:709 KASAN failure expected in "kfree_sensitive(ptr)", but none occurred - not ok 44 - kmalloc_double_kzfree + not ok 28 - kmalloc_double_kzfree 最後打印所有KASAN測試的累積狀態。成功:: @@ -445,7 +445,7 @@ KASAN連接到vmap基礎架構以懶清理未使用的影子內存。 1. 可加載模塊 啓用 ``CONFIG_KUNIT`` 後，KASAN-KUnit測試可以構建爲可加載模塊，並通過使用 - ``insmod`` 或 ``modprobe`` 加載 ``test_kasan.ko`` 來運行。 + ``insmod`` 或 ``modprobe`` 加載 ``kasan_test.ko`` 來運行。 2. 內置 diff --git a/Documentation/usb/functionfs.rst b/Documentation/usb/functionfs.rst index a3054bea38f3cd..d05a775bc45bc0 100644 --- a/Documentation/usb/functionfs.rst +++ b/Documentation/usb/functionfs.rst @@ -2,6 +2,9 @@ How FunctionFS works ==================== +Overview +======== + From kernel point of view it is just a composite function with some unique behaviour. It may be added to an USB configuration only after the user space driver has registered by writing descriptors and @@ -66,3 +69,36 @@ have been written to their ep0's. Conversely, the gadget is unregistered after the first USB function closes its endpoints. + +DMABUF interface +================ + +FunctionFS additionally supports a DMABUF based interface, where the +userspace can attach DMABUF objects (externally created) to an endpoint, +and subsequently use them for data transfers. + +A userspace application can then use this interface to share DMABUF +objects between several interfaces, allowing it to transfer data in a +zero-copy fashion, for instance between IIO and the USB stack. + +As part of this interface, three new IOCTLs have been added. These three +IOCTLs have to be performed on a data endpoint (ie. not ep0). They are: + + ``FUNCTIONFS_DMABUF_ATTACH(int)`` + Attach the DMABUF object, identified by its file descriptor, to the + data endpoint. Returns zero on success, and a negative errno value + on error. + + ``FUNCTIONFS_DMABUF_DETACH(int)`` + Detach the given DMABUF object, identified by its file descriptor, + from the data endpoint. Returns zero on success, and a negative + errno value on error. Note that closing the endpoint's file + descriptor will automatically detach all attached DMABUFs. + + ``FUNCTIONFS_DMABUF_TRANSFER(struct usb_ffs_dmabuf_transfer_req *)`` + Enqueue the previously attached DMABUF to the transfer queue. + The argument is a structure that packs the DMABUF's file descriptor, + the size in bytes to transfer (which should generally correspond to + the size of the DMABUF), and a 'flags' field which is unused + for now. Returns zero on success, and a negative errno value on + error. diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst index 077dfac7ed98f7..b086c7ab72f065 100644 --- a/Documentation/usb/gadget-testing.rst +++ b/Documentation/usb/gadget-testing.rst @@ -206,6 +206,14 @@ the standard procedure for using FunctionFS (mount it, run the userspace process which implements the function proper). The gadget should be enabled by writing a suitable string to usb_gadget/<gadget>/UDC. +The FFS function provides just one attribute in its function directory: + + ready + +The attribute is read-only and signals if the function is ready (1) to be +used, E.G. if userspace has written descriptors and strings to ep0, so +the gadget can be enabled. + Testing the FFS function ------------------------ diff --git a/Documentation/userspace-api/gpio/chardev.rst b/Documentation/userspace-api/gpio/chardev.rst new file mode 100644 index 00000000000000..c58dd9771ac9c0 --- /dev/null +++ b/Documentation/userspace-api/gpio/chardev.rst @@ -0,0 +1,116 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================== +GPIO Character Device Userspace API +=================================== + +This is latest version (v2) of the character device API, as defined in +``include/uapi/linux/gpio.h.`` + +First added in 5.10. + +.. note:: + Do NOT abuse userspace APIs to control hardware that has proper kernel + drivers. There may already be a driver for your use case, and an existing + kernel driver is sure to provide a superior solution to bitbashing + from userspace. + + Read Documentation/driver-api/gpio/drivers-on-gpio.rst to avoid reinventing + kernel wheels in userspace. + + Similarly, for multi-function lines there may be other subsystems, such as + Documentation/spi/index.rst, Documentation/i2c/index.rst, + Documentation/driver-api/pwm.rst, Documentation/w1/index.rst etc, that + provide suitable drivers and APIs for your hardware. + +Basic examples using the character device API can be found in ``tools/gpio/*``. + +The API is based around two major objects, the :ref:`gpio-v2-chip` and the +:ref:`gpio-v2-line-request`. + +.. _gpio-v2-chip: + +Chip +==== + +The Chip represents a single GPIO chip and is exposed to userspace using device +files of the form ``/dev/gpiochipX``. + +Each chip supports a number of GPIO lines, +:c:type:`chip.lines<gpiochip_info>`. Lines on the chip are identified by an +``offset`` in the range from 0 to ``chip.lines - 1``, i.e. `[0,chip.lines)`. + +Lines are requested from the chip using gpio-v2-get-line-ioctl.rst +and the resulting line request is used to access the GPIO chip's lines or +monitor the lines for edge events. + +Within this documentation, the file descriptor returned by calling `open()` +on the GPIO device file is referred to as ``chip_fd``. + +Operations +---------- + +The following operations may be performed on the chip: + +.. toctree:: + :titlesonly: + + Get Line <gpio-v2-get-line-ioctl> + Get Chip Info <gpio-get-chipinfo-ioctl> + Get Line Info <gpio-v2-get-lineinfo-ioctl> + Watch Line Info <gpio-v2-get-lineinfo-watch-ioctl> + Unwatch Line Info <gpio-get-lineinfo-unwatch-ioctl> + Read Line Info Changed Events <gpio-v2-lineinfo-changed-read> + +.. _gpio-v2-line-request: + +Line Request +============ + +Line requests are created by gpio-v2-get-line-ioctl.rst and provide +access to a set of requested lines. The line request is exposed to userspace +via the anonymous file descriptor returned in +:c:type:`request.fd<gpio_v2_line_request>` by gpio-v2-get-line-ioctl.rst. + +Within this documentation, the line request file descriptor is referred to +as ``req_fd``. + +Operations +---------- + +The following operations may be performed on the line request: + +.. toctree:: + :titlesonly: + + Get Line Values <gpio-v2-line-get-values-ioctl> + Set Line Values <gpio-v2-line-set-values-ioctl> + Read Line Edge Events <gpio-v2-line-event-read> + Reconfigure Lines <gpio-v2-line-set-config-ioctl> + +Types +===== + +This section contains the structs and enums that are referenced by the API v2, +as defined in ``include/uapi/linux/gpio.h``. + +.. kernel-doc:: include/uapi/linux/gpio.h + :identifiers: + gpio_v2_line_attr_id + gpio_v2_line_attribute + gpio_v2_line_changed_type + gpio_v2_line_config + gpio_v2_line_config_attribute + gpio_v2_line_event + gpio_v2_line_event_id + gpio_v2_line_flag + gpio_v2_line_info + gpio_v2_line_info_changed + gpio_v2_line_request + gpio_v2_line_values + gpiochip_info + +.. toctree:: + :hidden: + + error-codes diff --git a/Documentation/userspace-api/gpio/chardev_v1.rst b/Documentation/userspace-api/gpio/chardev_v1.rst new file mode 100644 index 00000000000000..67124b1d048794 --- /dev/null +++ b/Documentation/userspace-api/gpio/chardev_v1.rst @@ -0,0 +1,131 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================== +GPIO Character Device Userspace API (v1) +======================================== + +.. warning:: + This API is obsoleted by chardev.rst (v2). + + New developments should use the v2 API, and existing developments are + encouraged to migrate as soon as possible, as this API will be removed + in the future. The v2 API is a functional superset of the v1 API so any + v1 call can be directly translated to a v2 equivalent. + + This interface will continue to be maintained for the migration period, + but new features will only be added to the new API. + +First added in 4.8. + +The API is based around three major objects, the :ref:`gpio-v1-chip`, the +:ref:`gpio-v1-line-handle`, and the :ref:`gpio-v1-line-event`. + +Where "line event" is used in this document it refers to the request that can +monitor a line for edge events, not the edge events themselves. + +.. _gpio-v1-chip: + +Chip +==== + +The Chip represents a single GPIO chip and is exposed to userspace using device +files of the form ``/dev/gpiochipX``. + +Each chip supports a number of GPIO lines, +:c:type:`chip.lines<gpiochip_info>`. Lines on the chip are identified by an +``offset`` in the range from 0 to ``chip.lines - 1``, i.e. `[0,chip.lines)`. + +Lines are requested from the chip using either gpio-get-linehandle-ioctl.rst +and the resulting line handle is used to access the GPIO chip's lines, or +gpio-get-lineevent-ioctl.rst and the resulting line event is used to monitor +a GPIO line for edge events. + +Within this documentation, the file descriptor returned by calling `open()` +on the GPIO device file is referred to as ``chip_fd``. + +Operations +---------- + +The following operations may be performed on the chip: + +.. toctree:: + :titlesonly: + + Get Line Handle <gpio-get-linehandle-ioctl> + Get Line Event <gpio-get-lineevent-ioctl> + Get Chip Info <gpio-get-chipinfo-ioctl> + Get Line Info <gpio-get-lineinfo-ioctl> + Watch Line Info <gpio-get-lineinfo-watch-ioctl> + Unwatch Line Info <gpio-get-lineinfo-unwatch-ioctl> + Read Line Info Changed Events <gpio-lineinfo-changed-read> + +.. _gpio-v1-line-handle: + +Line Handle +=========== + +Line handles are created by gpio-get-linehandle-ioctl.rst and provide +access to a set of requested lines. The line handle is exposed to userspace +via the anonymous file descriptor returned in +:c:type:`request.fd<gpiohandle_request>` by gpio-get-linehandle-ioctl.rst. + +Within this documentation, the line handle file descriptor is referred to +as ``handle_fd``. + +Operations +---------- + +The following operations may be performed on the line handle: + +.. toctree:: + :titlesonly: + + Get Line Values <gpio-handle-get-line-values-ioctl> + Set Line Values <gpio-handle-set-line-values-ioctl> + Reconfigure Lines <gpio-handle-set-config-ioctl> + +.. _gpio-v1-line-event: + +Line Event +========== + +Line events are created by gpio-get-lineevent-ioctl.rst and provide +access to a requested line. The line event is exposed to userspace +via the anonymous file descriptor returned in +:c:type:`request.fd<gpioevent_request>` by gpio-get-lineevent-ioctl.rst. + +Within this documentation, the line event file descriptor is referred to +as ``event_fd``. + +Operations +---------- + +The following operations may be performed on the line event: + +.. toctree:: + :titlesonly: + + Get Line Value <gpio-handle-get-line-values-ioctl> + Read Line Edge Events <gpio-lineevent-data-read> + +Types +===== + +This section contains the structs that are referenced by the ABI v1. + +The :c:type:`struct gpiochip_info<gpiochip_info>` is common to ABI v1 and v2. + +.. kernel-doc:: include/uapi/linux/gpio.h + :identifiers: + gpioevent_data + gpioevent_request + gpiohandle_config + gpiohandle_data + gpiohandle_request + gpioline_info + gpioline_info_changed + +.. toctree:: + :hidden: + + error-codes diff --git a/Documentation/userspace-api/gpio/error-codes.rst b/Documentation/userspace-api/gpio/error-codes.rst new file mode 100644 index 00000000000000..6bf2948990cdcc --- /dev/null +++ b/Documentation/userspace-api/gpio/error-codes.rst @@ -0,0 +1,79 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _gpio_errors: + +******************* +GPIO Error Codes +******************* + +.. _gpio-errors: + +.. tabularcolumns:: |p{2.5cm}|p{15.0cm}| + +.. flat-table:: Common GPIO error codes + :header-rows: 0 + :stub-columns: 0 + :widths: 1 16 + + - - ``EAGAIN`` (aka ``EWOULDBLOCK``) + + - The device was opened in non-blocking mode and a read can't + be performed as there is no data available. + + - - ``EBADF`` + + - The file descriptor is not valid. + + - - ``EBUSY`` + + - The ioctl can't be handled because the device is busy. Typically + returned when an ioctl attempts something that would require the + usage of a resource that was already allocated. The ioctl must not + be retried without performing another action to fix the problem + first. + + - - ``EFAULT`` + + - There was a failure while copying data from/to userspace, probably + caused by an invalid pointer reference. + + - - ``EINVAL`` + + - One or more of the ioctl parameters are invalid or out of the + allowed range. This is a widely used error code. + + - - ``ENODEV`` + + - Device not found or was removed. + + - - ``ENOMEM`` + + - There's not enough memory to handle the desired operation. + + - - ``EPERM`` + + - Permission denied. Typically returned in response to an attempt + to perform an action incompatible with the current line + configuration. + + - - ``EIO`` + + - I/O error. Typically returned when there are problems communicating + with a hardware device or requesting features that hardware does not + support. This could indicate broken or flaky hardware. + It's a 'Something is wrong, I give up!' type of error. + + - - ``ENXIO`` + + - Typically returned when a feature requiring interrupt support was + requested, but the line does not support interrupts. + +.. note:: + + #. This list is not exhaustive; ioctls may return other error codes. + Since errors may have side effects such as a driver reset, + applications should abort on unexpected errors, or otherwise + assume that the device is in a bad state. + + #. Request-specific error codes are listed in the individual + requests descriptions. diff --git a/Documentation/userspace-api/gpio/gpio-get-chipinfo-ioctl.rst b/Documentation/userspace-api/gpio/gpio-get-chipinfo-ioctl.rst new file mode 100644 index 00000000000000..05f07fdefe2f64 --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-get-chipinfo-ioctl.rst @@ -0,0 +1,41 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_GET_CHIPINFO_IOCTL: + +*********************** +GPIO_GET_CHIPINFO_IOCTL +*********************** + +Name +==== + +GPIO_GET_CHIPINFO_IOCTL - Get the publicly available information for a chip. + +Synopsis +======== + +.. c:macro:: GPIO_GET_CHIPINFO_IOCTL + +``int ioctl(int chip_fd, GPIO_GET_CHIPINFO_IOCTL, struct gpiochip_info *info)`` + +Arguments +========= + +``chip_fd`` + The file descriptor of the GPIO character device returned by `open()`. + +``info`` + The :c:type:`chip_info<gpiochip_info>` to be populated. + +Description +=========== + +Gets the publicly available information for a particular GPIO chip. + +Return Value +============ + +On success 0 and ``info`` is populated with the chip info. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-get-lineevent-ioctl.rst b/Documentation/userspace-api/gpio/gpio-get-lineevent-ioctl.rst new file mode 100644 index 00000000000000..09a9254f38cffd --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-get-lineevent-ioctl.rst @@ -0,0 +1,84 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_GET_LINEEVENT_IOCTL: + +************************ +GPIO_GET_LINEEVENT_IOCTL +************************ + +.. warning:: + This ioctl is part of chardev_v1.rst and is obsoleted by + gpio-v2-get-line-ioctl.rst. + +Name +==== + +GPIO_GET_LINEEVENT_IOCTL - Request a line with edge detection from the kernel. + +Synopsis +======== + +.. c:macro:: GPIO_GET_LINEEVENT_IOCTL + +``int ioctl(int chip_fd, GPIO_GET_LINEEVENT_IOCTL, struct gpioevent_request *request)`` + +Arguments +========= + +``chip_fd`` + The file descriptor of the GPIO character device returned by `open()`. + +``request`` + The :c:type:`event_request<gpioevent_request>` specifying the line + to request and its configuration. + +Description +=========== + +Request a line with edge detection from the kernel. + +On success, the requesting process is granted exclusive access to the line +value and may receive events when edges are detected on the line, as +described in gpio-lineevent-data-read.rst. + +The state of a line is guaranteed to remain as requested until the returned +file descriptor is closed. Once the file descriptor is closed, the state of +the line becomes uncontrolled from the userspace perspective, and may revert +to its default state. + +Requesting a line already in use is an error (**EBUSY**). + +Requesting edge detection on a line that does not support interrupts is an +error (**ENXIO**). + +As with the :ref:`line handle<gpio-get-linehandle-config-support>`, the +bias configuration is best effort. + +Closing the ``chip_fd`` has no effect on existing line events. + +Configuration Rules +------------------- + +The following configuration rules apply: + +The line event is requested as an input, so no flags specific to output lines, +``GPIOHANDLE_REQUEST_OUTPUT``, ``GPIOHANDLE_REQUEST_OPEN_DRAIN``, or +``GPIOHANDLE_REQUEST_OPEN_SOURCE``, may be set. + +Only one bias flag, ``GPIOHANDLE_REQUEST_BIAS_xxx``, may be set. +If no bias flags are set then the bias configuration is not changed. + +The edge flags, ``GPIOEVENT_REQUEST_RISING_EDGE`` and +``GPIOEVENT_REQUEST_FALLING_EDGE``, may be combined to detect both rising +and falling edges. + +Requesting an invalid configuration is an error (**EINVAL**). + +Return Value +============ + +On success 0 and the :c:type:`request.fd<gpioevent_request>` contains the file +descriptor for the request. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-get-linehandle-ioctl.rst b/Documentation/userspace-api/gpio/gpio-get-linehandle-ioctl.rst new file mode 100644 index 00000000000000..9112a9d31174f7 --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-get-linehandle-ioctl.rst @@ -0,0 +1,125 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_GET_LINEHANDLE_IOCTL: + +************************* +GPIO_GET_LINEHANDLE_IOCTL +************************* + +.. warning:: + This ioctl is part of chardev_v1.rst and is obsoleted by + gpio-v2-get-line-ioctl.rst. + +Name +==== + +GPIO_GET_LINEHANDLE_IOCTL - Request a line or lines from the kernel. + +Synopsis +======== + +.. c:macro:: GPIO_GET_LINEHANDLE_IOCTL + +``int ioctl(int chip_fd, GPIO_GET_LINEHANDLE_IOCTL, struct gpiohandle_request *request)`` + +Arguments +========= + +``chip_fd`` + The file descriptor of the GPIO character device returned by `open()`. + +``request`` + The :c:type:`handle_request<gpiohandle_request>` specifying the lines to + request and their configuration. + +Description +=========== + +Request a line or lines from the kernel. + +While multiple lines may be requested, the same configuration applies to all +lines in the request. + +On success, the requesting process is granted exclusive access to the line +value and write access to the line configuration. + +The state of a line, including the value of output lines, is guaranteed to +remain as requested until the returned file descriptor is closed. Once the +file descriptor is closed, the state of the line becomes uncontrolled from +the userspace perspective, and may revert to its default state. + +Requesting a line already in use is an error (**EBUSY**). + +Closing the ``chip_fd`` has no effect on existing line handles. + +.. _gpio-get-linehandle-config-rules: + +Configuration Rules +------------------- + +The following configuration rules apply: + +The direction flags, ``GPIOHANDLE_REQUEST_INPUT`` and +``GPIOHANDLE_REQUEST_OUTPUT``, cannot be combined. If neither are set then the +only other flag that may be set is ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` and the +line is requested "as-is" to allow reading of the line value without altering +the electrical configuration. + +The drive flags, ``GPIOHANDLE_REQUEST_OPEN_xxx``, require the +``GPIOHANDLE_REQUEST_OUTPUT`` to be set. +Only one drive flag may be set. +If none are set then the line is assumed push-pull. + +Only one bias flag, ``GPIOHANDLE_REQUEST_BIAS_xxx``, may be set, and +it requires a direction flag to also be set. +If no bias flags are set then the bias configuration is not changed. + +Requesting an invalid configuration is an error (**EINVAL**). + + +.. _gpio-get-linehandle-config-support: + +Configuration Support +--------------------- + +Where the requested configuration is not directly supported by the underlying +hardware and driver, the kernel applies one of these approaches: + + - reject the request + - emulate the feature in software + - treat the feature as best effort + +The approach applied depends on whether the feature can reasonably be emulated +in software, and the impact on the hardware and userspace if the feature is not +supported. +The approach applied for each feature is as follows: + +============== =========== +Feature Approach +============== =========== +Bias best effort +Direction reject +Drive emulate +============== =========== + +Bias is treated as best effort to allow userspace to apply the same +configuration for platforms that support internal bias as those that require +external bias. +Worst case the line floats rather than being biased as expected. + +Drive is emulated by switching the line to an input when the line should not +be driven. + +In all cases, the configuration reported by gpio-get-lineinfo-ioctl.rst +is the requested configuration, not the resulting hardware configuration. +Userspace cannot determine if a feature is supported in hardware, is +emulated, or is best effort. + +Return Value +============ + +On success 0 and the :c:type:`request.fd<gpiohandle_request>` contains the +file descriptor for the request. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-get-lineinfo-ioctl.rst b/Documentation/userspace-api/gpio/gpio-get-lineinfo-ioctl.rst new file mode 100644 index 00000000000000..c895b8910b252a --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-get-lineinfo-ioctl.rst @@ -0,0 +1,54 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_GET_LINEINFO_IOCTL: + +*********************** +GPIO_GET_LINEINFO_IOCTL +*********************** + +.. warning:: + This ioctl is part of chardev_v1.rst and is obsoleted by + gpio-v2-get-lineinfo-ioctl.rst. + +Name +==== + +GPIO_GET_LINEINFO_IOCTL - Get the publicly available information for a line. + +Synopsis +======== + +.. c:macro:: GPIO_GET_LINEINFO_IOCTL + +``int ioctl(int chip_fd, GPIO_GET_LINEINFO_IOCTL, struct gpioline_info *info)`` + +Arguments +========= + +``chip_fd`` + The file descriptor of the GPIO character device returned by `open()`. + +``info`` + The :c:type:`line_info<gpioline_info>` to be populated, with the + ``offset`` field set to indicate the line to be collected. + +Description +=========== + +Get the publicly available information for a line. + +This information is available independent of whether the line is in use. + +.. note:: + The line info does not include the line value. + + The line must be requested using gpio-get-linehandle-ioctl.rst or + gpio-get-lineevent-ioctl.rst to access its value. + +Return Value +============ + +On success 0 and ``info`` is populated with the chip info. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-get-lineinfo-unwatch-ioctl.rst b/Documentation/userspace-api/gpio/gpio-get-lineinfo-unwatch-ioctl.rst new file mode 100644 index 00000000000000..a82d0161daf871 --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-get-lineinfo-unwatch-ioctl.rst @@ -0,0 +1,49 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_GET_LINEINFO_UNWATCH_IOCTL: + +******************************* +GPIO_GET_LINEINFO_UNWATCH_IOCTL +******************************* + +Name +==== + +GPIO_GET_LINEINFO_UNWATCH_IOCTL - Disable watching a line for changes to its +requested state and configuration information. + +Synopsis +======== + +.. c:macro:: GPIO_GET_LINEINFO_UNWATCH_IOCTL + +``int ioctl(int chip_fd, GPIO_GET_LINEINFO_UNWATCH_IOCTL, u32 *offset)`` + +Arguments +========= + +``chip_fd`` + The file descriptor of the GPIO character device returned by `open()`. + +``offset`` + The offset of the line to no longer watch. + +Description +=========== + +Remove the line from the list of lines being watched on this ``chip_fd``. + +This is the reverse of gpio-v2-get-lineinfo-watch-ioctl.rst (v2) and +gpio-get-lineinfo-watch-ioctl.rst (v1). + +Unwatching a line that is not watched is an error (**EBUSY**). + +First added in 5.7. + +Return Value +============ + +On success 0. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-get-lineinfo-watch-ioctl.rst b/Documentation/userspace-api/gpio/gpio-get-lineinfo-watch-ioctl.rst new file mode 100644 index 00000000000000..f5c92b69a4961b --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-get-lineinfo-watch-ioctl.rst @@ -0,0 +1,74 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_GET_LINEINFO_WATCH_IOCTL: + +***************************** +GPIO_GET_LINEINFO_WATCH_IOCTL +***************************** + +.. warning:: + This ioctl is part of chardev_v1.rst and is obsoleted by + gpio-v2-get-lineinfo-watch-ioctl.rst. + +Name +==== + +GPIO_GET_LINEINFO_WATCH_IOCTL - Enable watching a line for changes to its +request state and configuration information. + +Synopsis +======== + +.. c:macro:: GPIO_GET_LINEINFO_WATCH_IOCTL + +``int ioctl(int chip_fd, GPIO_GET_LINEINFO_WATCH_IOCTL, struct gpioline_info *info)`` + +Arguments +========= + +``chip_fd`` + The file descriptor of the GPIO character device returned by `open()`. + +``info`` + The :c:type:`line_info<gpioline_info>` struct to be populated, with + the ``offset`` set to indicate the line to watch + +Description +=========== + +Enable watching a line for changes to its request state and configuration +information. Changes to line info include a line being requested, released +or reconfigured. + +.. note:: + Watching line info is not generally required, and would typically only be + used by a system monitoring component. + + The line info does NOT include the line value. + + The line must be requested using gpio-get-linehandle-ioctl.rst or + gpio-get-lineevent-ioctl.rst to access its value, and the line event can + monitor a line for events using gpio-lineevent-data-read.rst. + +By default all lines are unwatched when the GPIO chip is opened. + +Multiple lines may be watched simultaneously by adding a watch for each. + +Once a watch is set, any changes to line info will generate events which can be +read from the ``chip_fd`` as described in +gpio-lineinfo-changed-read.rst. + +Adding a watch to a line that is already watched is an error (**EBUSY**). + +Watches are specific to the ``chip_fd`` and are independent of watches +on the same GPIO chip opened with a separate call to `open()`. + +First added in 5.7. + +Return Value +============ + +On success 0 and ``info`` is populated with the current line info. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst b/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst new file mode 100644 index 00000000000000..25263b8f058885 --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst @@ -0,0 +1,56 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIOHANDLE_GET_LINE_VALUES_IOCTL: + +******************************** +GPIOHANDLE_GET_LINE_VALUES_IOCTL +******************************** +.. warning:: + This ioctl is part of chardev_v1.rst and is obsoleted by + gpio-v2-line-get-values-ioctl.rst. + +Name +==== + +GPIOHANDLE_GET_LINE_VALUES_IOCTL - Get the values of all requested lines. + +Synopsis +======== + +.. c:macro:: GPIOHANDLE_GET_LINE_VALUES_IOCTL + +``int ioctl(int handle_fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, struct gpiohandle_data *values)`` + +Arguments +========= + +``handle_fd`` + The file descriptor of the GPIO character device, as returned in the + :c:type:`request.fd<gpiohandle_request>` by gpio-get-linehandle-ioctl.rst. + +``values`` + The :c:type:`line_values<gpiohandle_data>` to be populated. + +Description +=========== + +Get the values of all requested lines. + +The values of both input and output lines may be read. + +For output lines, the value returned is driver and configuration dependent and +may be either the output buffer (the last requested value set) or the input +buffer (the actual level of the line), and depending on the hardware and +configuration these may differ. + +This ioctl can also be used to read the line value for line events, +substituting the ``event_fd`` for the ``handle_fd``. As there is only +one line requested in that case, only the one value is returned in ``values``. + +Return Value +============ + +On success 0 and ``values`` populated with the values read. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-handle-set-config-ioctl.rst b/Documentation/userspace-api/gpio/gpio-handle-set-config-ioctl.rst new file mode 100644 index 00000000000000..d002a84681acf9 --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-handle-set-config-ioctl.rst @@ -0,0 +1,63 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIOHANDLE_SET_CONFIG_IOCTL: + +*************************** +GPIOHANDLE_SET_CONFIG_IOCTL +*************************** + +.. warning:: + This ioctl is part of chardev_v1.rst and is obsoleted by + gpio-v2-line-set-config-ioctl.rst. + +Name +==== + +GPIOHANDLE_SET_CONFIG_IOCTL - Update the configuration of previously requested lines. + +Synopsis +======== + +.. c:macro:: GPIOHANDLE_SET_CONFIG_IOCTL + +``int ioctl(int handle_fd, GPIOHANDLE_SET_CONFIG_IOCTL, struct gpiohandle_config *config)`` + +Arguments +========= + +``handle_fd`` + The file descriptor of the GPIO character device, as returned in the + :c:type:`request.fd<gpiohandle_request>` by gpio-get-linehandle-ioctl.rst. + +``config`` + The new :c:type:`configuration<gpiohandle_config>` to apply to the + requested lines. + +Description +=========== + +Update the configuration of previously requested lines, without releasing the +line or introducing potential glitches. + +The configuration applies to all requested lines. + +The same :ref:`gpio-get-linehandle-config-rules` and +:ref:`gpio-get-linehandle-config-support` that apply when requesting the +lines also apply when updating the line configuration. + +The motivating use case for this command is changing direction of +bi-directional lines between input and output, but it may be used more +generally to move lines seamlessly from one configuration state to another. + +To only change the value of output lines, use +gpio-handle-set-line-values-ioctl.rst. + +First added in 5.5. + +Return Value +============ + +On success 0. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst b/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst new file mode 100644 index 00000000000000..0aa05e623a6c80 --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst @@ -0,0 +1,48 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_HANDLE_SET_LINE_VALUES_IOCTL: + +********************************* +GPIO_HANDLE_SET_LINE_VALUES_IOCTL +********************************* +.. warning:: + This ioctl is part of chardev_v1.rst and is obsoleted by + gpio-v2-line-set-values-ioctl.rst. + +Name +==== + +GPIO_HANDLE_SET_LINE_VALUES_IOCTL - Set the values of all requested output lines. + +Synopsis +======== + +.. c:macro:: GPIO_HANDLE_SET_LINE_VALUES_IOCTL + +``int ioctl(int handle_fd, GPIO_HANDLE_SET_LINE_VALUES_IOCTL, struct gpiohandle_data *values)`` + +Arguments +========= + +``handle_fd`` + The file descriptor of the GPIO character device, as returned in the + :c:type:`request.fd<gpiohandle_request>` by gpio-get-linehandle-ioctl.rst. + +``values`` + The :c:type:`line_values<gpiohandle_data>` to set. + +Description +=========== + +Set the values of all requested output lines. + +Only the values of output lines may be set. +Attempting to set the value of input lines is an error (**EPERM**). + +Return Value +============ + +On success 0. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-lineevent-data-read.rst b/Documentation/userspace-api/gpio/gpio-lineevent-data-read.rst new file mode 100644 index 00000000000000..68b8d4f9f604c4 --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-lineevent-data-read.rst @@ -0,0 +1,84 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_LINEEVENT_DATA_READ: + +************************ +GPIO_LINEEVENT_DATA_READ +************************ + +.. warning:: + This ioctl is part of chardev_v1.rst and is obsoleted by + gpio-v2-line-event-read.rst. + +Name +==== + +GPIO_LINEEVENT_DATA_READ - Read edge detection events from a line event. + +Synopsis +======== + +``int read(int event_fd, void *buf, size_t count)`` + +Arguments +========= + +``event_fd`` + The file descriptor of the GPIO character device, as returned in the + :c:type:`request.fd<gpioevent_request>` by gpio-get-lineevent-ioctl.rst. + +``buf`` + The buffer to contain the :c:type:`events<gpioevent_data>`. + +``count`` + The number of bytes available in ``buf``, which must be at + least the size of a :c:type:`gpioevent_data`. + +Description +=========== + +Read edge detection events for a line from a line event. + +Edge detection must be enabled for the input line using either +``GPIOEVENT_REQUEST_RISING_EDGE`` or ``GPIOEVENT_REQUEST_FALLING_EDGE``, or +both. Edge events are then generated whenever edge interrupts are detected on +the input line. + +The kernel captures and timestamps edge events as close as possible to their +occurrence and stores them in a buffer from where they can be read by +userspace at its convenience using `read()`. + +The source of the clock for :c:type:`event.timestamp<gpioevent_data>` is +``CLOCK_MONOTONIC``, except for kernels earlier than Linux 5.7 when it was +``CLOCK_REALTIME``. There is no indication in the :c:type:`gpioevent_data` +as to which clock source is used, it must be determined from either the kernel +version or sanity checks on the timestamp itself. + +Events read from the buffer are always in the same order that they were +detected by the kernel. + +The size of the kernel event buffer is fixed at 16 events. + +The buffer may overflow if bursts of events occur quicker than they are read +by userspace. If an overflow occurs then the most recent event is discarded. +Overflow cannot be detected from userspace. + +To minimize the number of calls required to copy events from the kernel to +userspace, `read()` supports copying multiple events. The number of events +copied is the lower of the number available in the kernel buffer and the +number that will fit in the userspace buffer (``buf``). + +The `read()` will block if no event is available and the ``event_fd`` has not +been set **O_NONBLOCK**. + +The presence of an event can be tested for by checking that the ``event_fd`` is +readable using `poll()` or an equivalent. + +Return Value +============ + +On success the number of bytes read, which will be a multiple of the size of +a :c:type:`gpio_lineevent_data` event. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-lineinfo-changed-read.rst b/Documentation/userspace-api/gpio/gpio-lineinfo-changed-read.rst new file mode 100644 index 00000000000000..c4f5e1787a9df5 --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-lineinfo-changed-read.rst @@ -0,0 +1,87 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_LINEINFO_CHANGED_READ: + +************************** +GPIO_LINEINFO_CHANGED_READ +************************** + +.. warning:: + This ioctl is part of chardev_v1.rst and is obsoleted by + gpio-v2-lineinfo-changed-read.rst. + +Name +==== + +GPIO_LINEINFO_CHANGED_READ - Read line info change events for watched lines +from the chip. + +Synopsis +======== + +``int read(int chip_fd, void *buf, size_t count)`` + +Arguments +========= + +``chip_fd`` + The file descriptor of the GPIO character device returned by `open()`. + +``buf`` + The buffer to contain the :c:type:`events<gpioline_info_changed>`. + +``count`` + The number of bytes available in ``buf``, which must be at least the size + of a :c:type:`gpioline_info_changed` event. + +Description +=========== + +Read line info change events for watched lines from the chip. + +.. note:: + Monitoring line info changes is not generally required, and would typically + only be performed by a system monitoring component. + + These events relate to changes in a line's request state or configuration, + not its value. Use gpio-lineevent-data-read.rst to receive events when a + line changes value. + +A line must be watched using gpio-get-lineinfo-watch-ioctl.rst to generate +info changed events. Subsequently, a request, release, or reconfiguration +of the line will generate an info changed event. + +The kernel timestamps events when they occur and stores them in a buffer +from where they can be read by userspace at its convenience using `read()`. + +The size of the kernel event buffer is fixed at 32 events per ``chip_fd``. + +The buffer may overflow if bursts of events occur quicker than they are read +by userspace. If an overflow occurs then the most recent event is discarded. +Overflow cannot be detected from userspace. + +Events read from the buffer are always in the same order that they were +detected by the kernel, including when multiple lines are being monitored by +the one ``chip_fd``. + +To minimize the number of calls required to copy events from the kernel to +userspace, `read()` supports copying multiple events. The number of events +copied is the lower of the number available in the kernel buffer and the +number that will fit in the userspace buffer (``buf``). + +A `read()` will block if no event is available and the ``chip_fd`` has not +been set **O_NONBLOCK**. + +The presence of an event can be tested for by checking that the ``chip_fd`` is +readable using `poll()` or an equivalent. + +First added in 5.7. + +Return Value +============ + +On success the number of bytes read, which will be a multiple of the size of +a :c:type:`gpioline_info_changed` event. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst new file mode 100644 index 00000000000000..56b975801b6af0 --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst @@ -0,0 +1,152 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_V2_GET_LINE_IOCTL: + +********************** +GPIO_V2_GET_LINE_IOCTL +********************** + +Name +==== + +GPIO_V2_GET_LINE_IOCTL - Request a line or lines from the kernel. + +Synopsis +======== + +.. c:macro:: GPIO_V2_GET_LINE_IOCTL + +``int ioctl(int chip_fd, GPIO_V2_GET_LINE_IOCTL, struct gpio_v2_line_request *request)`` + +Arguments +========= + +``chip_fd`` + The file descriptor of the GPIO character device returned by `open()`. + +``request`` + The :c:type:`line_request<gpio_v2_line_request>` specifying the lines + to request and their configuration. + +Description +=========== + +On success, the requesting process is granted exclusive access to the line +value, write access to the line configuration, and may receive events when +edges are detected on the line, all of which are described in more detail in +:ref:`gpio-v2-line-request`. + +A number of lines may be requested in the one line request, and request +operations are performed on the requested lines by the kernel as atomically +as possible. e.g. gpio-v2-line-get-values-ioctl.rst will read all the +requested lines at once. + +The state of a line, including the value of output lines, is guaranteed to +remain as requested until the returned file descriptor is closed. Once the +file descriptor is closed, the state of the line becomes uncontrolled from +the userspace perspective, and may revert to its default state. + +Requesting a line already in use is an error (**EBUSY**). + +Closing the ``chip_fd`` has no effect on existing line requests. + +.. _gpio-v2-get-line-config-rules: + +Configuration Rules +------------------- + +For any given requested line, the following configuration rules apply: + +The direction flags, ``GPIO_V2_LINE_FLAG_INPUT`` and +``GPIO_V2_LINE_FLAG_OUTPUT``, cannot be combined. If neither are set then +the only other flag that may be set is ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` +and the line is requested "as-is" to allow reading of the line value +without altering the electrical configuration. + +The drive flags, ``GPIO_V2_LINE_FLAG_OPEN_xxx``, require the +``GPIO_V2_LINE_FLAG_OUTPUT`` to be set. +Only one drive flag may be set. +If none are set then the line is assumed push-pull. + +Only one bias flag, ``GPIO_V2_LINE_FLAG_BIAS_xxx``, may be set, and it +requires a direction flag to also be set. +If no bias flags are set then the bias configuration is not changed. + +The edge flags, ``GPIO_V2_LINE_FLAG_EDGE_xxx``, require +``GPIO_V2_LINE_FLAG_INPUT`` to be set and may be combined to detect both rising +and falling edges. Requesting edge detection from a line that does not support +it is an error (**ENXIO**). + +Only one event clock flag, ``GPIO_V2_LINE_FLAG_EVENT_CLOCK_xxx``, may be set. +If none are set then the event clock defaults to ``CLOCK_MONOTONIC``. +The ``GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE`` flag requires supporting hardware +and a kernel with ``CONFIG_HTE`` set. Requesting HTE from a device that +doesn't support it is an error (**EOPNOTSUP**). + +The :c:type:`debounce_period_us<gpio_v2_line_attribute>` attribute may only +be applied to lines with ``GPIO_V2_LINE_FLAG_INPUT`` set. When set, debounce +applies to both the values returned by gpio-v2-line-get-values-ioctl.rst and +the edges returned by gpio-v2-line-event-read.rst. If not +supported directly by hardware, debouncing is emulated in software by the +kernel. Requesting debounce on a line that supports neither debounce in +hardware nor interrupts, as required for software emulation, is an error +(**ENXIO**). + +Requesting an invalid configuration is an error (**EINVAL**). + +.. _gpio-v2-get-line-config-support: + +Configuration Support +--------------------- + +Where the requested configuration is not directly supported by the underlying +hardware and driver, the kernel applies one of these approaches: + + - reject the request + - emulate the feature in software + - treat the feature as best effort + +The approach applied depends on whether the feature can reasonably be emulated +in software, and the impact on the hardware and userspace if the feature is not +supported. +The approach applied for each feature is as follows: + +============== =========== +Feature Approach +============== =========== +Bias best effort +Debounce emulate +Direction reject +Drive emulate +Edge Detection reject +============== =========== + +Bias is treated as best effort to allow userspace to apply the same +configuration for platforms that support internal bias as those that require +external bias. +Worst case the line floats rather than being biased as expected. + +Debounce is emulated by applying a filter to hardware interrupts on the line. +An edge event is generated after an edge is detected and the line remains +stable for the debounce period. +The event timestamp corresponds to the end of the debounce period. + +Drive is emulated by switching the line to an input when the line should not +be actively driven. + +Edge detection requires interrupt support, and is rejected if that is not +supported. Emulation by polling can still be performed from userspace. + +In all cases, the configuration reported by gpio-v2-get-lineinfo-ioctl.rst +is the requested configuration, not the resulting hardware configuration. +Userspace cannot determine if a feature is supported in hardware, is +emulated, or is best effort. + +Return Value +============ + +On success 0 and the :c:type:`request.fd<gpio_v2_line_request>` contains the +file descriptor for the request. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-v2-get-lineinfo-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-get-lineinfo-ioctl.rst new file mode 100644 index 00000000000000..bc4d8df887d40f --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-v2-get-lineinfo-ioctl.rst @@ -0,0 +1,50 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_V2_GET_LINEINFO_IOCTL: + +************************** +GPIO_V2_GET_LINEINFO_IOCTL +************************** + +Name +==== + +GPIO_V2_GET_LINEINFO_IOCTL - Get the publicly available information for a line. + +Synopsis +======== + +.. c:macro:: GPIO_V2_GET_LINEINFO_IOCTL + +``int ioctl(int chip_fd, GPIO_V2_GET_LINEINFO_IOCTL, struct gpio_v2_line_info *info)`` + +Arguments +========= + +``chip_fd`` + The file descriptor of the GPIO character device returned by `open()`. + +``info`` + The :c:type:`line_info<gpio_v2_line_info>` to be populated, with the + ``offset`` field set to indicate the line to be collected. + +Description +=========== + +Get the publicly available information for a line. + +This information is available independent of whether the line is in use. + +.. note:: + The line info does not include the line value. + + The line must be requested using gpio-v2-get-line-ioctl.rst to access its + value. + +Return Value +============ + +On success 0 and ``info`` is populated with the chip info. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-v2-get-lineinfo-watch-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-get-lineinfo-watch-ioctl.rst new file mode 100644 index 00000000000000..938ff85a93226f --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-v2-get-lineinfo-watch-ioctl.rst @@ -0,0 +1,67 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_V2_GET_LINEINFO_WATCH_IOCTL: + +******************************** +GPIO_V2_GET_LINEINFO_WATCH_IOCTL +******************************** + +Name +==== + +GPIO_V2_GET_LINEINFO_WATCH_IOCTL - Enable watching a line for changes to its +request state and configuration information. + +Synopsis +======== + +.. c:macro:: GPIO_V2_GET_LINEINFO_WATCH_IOCTL + +``int ioctl(int chip_fd, GPIO_V2_GET_LINEINFO_WATCH_IOCTL, struct gpio_v2_line_info *info)`` + +Arguments +========= + +``chip_fd`` + The file descriptor of the GPIO character device returned by `open()`. + +``info`` + The :c:type:`line_info<gpio_v2_line_info>` struct to be populated, with + the ``offset`` set to indicate the line to watch + +Description +=========== + +Enable watching a line for changes to its request state and configuration +information. Changes to line info include a line being requested, released +or reconfigured. + +.. note:: + Watching line info is not generally required, and would typically only be + used by a system monitoring component. + + The line info does NOT include the line value. + The line must be requested using gpio-v2-get-line-ioctl.rst to access + its value, and the line request can monitor a line for events using + gpio-v2-line-event-read.rst. + +By default all lines are unwatched when the GPIO chip is opened. + +Multiple lines may be watched simultaneously by adding a watch for each. + +Once a watch is set, any changes to line info will generate events which can be +read from the ``chip_fd`` as described in +gpio-v2-lineinfo-changed-read.rst. + +Adding a watch to a line that is already watched is an error (**EBUSY**). + +Watches are specific to the ``chip_fd`` and are independent of watches +on the same GPIO chip opened with a separate call to `open()`. + +Return Value +============ + +On success 0 and ``info`` is populated with the current line info. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-v2-line-event-read.rst b/Documentation/userspace-api/gpio/gpio-v2-line-event-read.rst new file mode 100644 index 00000000000000..6513c23fb7cada --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-v2-line-event-read.rst @@ -0,0 +1,83 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_V2_LINE_EVENT_READ: + +*********************** +GPIO_V2_LINE_EVENT_READ +*********************** + +Name +==== + +GPIO_V2_LINE_EVENT_READ - Read edge detection events for lines from a request. + +Synopsis +======== + +``int read(int req_fd, void *buf, size_t count)`` + +Arguments +========= + +``req_fd`` + The file descriptor of the GPIO character device, as returned in the + :c:type:`request.fd<gpio_v2_line_request>` by gpio-v2-get-line-ioctl.rst. + +``buf`` + The buffer to contain the :c:type:`events<gpio_v2_line_event>`. + +``count`` + The number of bytes available in ``buf``, which must be at + least the size of a :c:type:`gpio_v2_line_event`. + +Description +=========== + +Read edge detection events for lines from a request. + +Edge detection must be enabled for the input line using either +``GPIO_V2_LINE_FLAG_EDGE_RISING`` or ``GPIO_V2_LINE_FLAG_EDGE_FALLING``, or +both. Edge events are then generated whenever edge interrupts are detected on +the input line. + +The kernel captures and timestamps edge events as close as possible to their +occurrence and stores them in a buffer from where they can be read by +userspace at its convenience using `read()`. + +Events read from the buffer are always in the same order that they were +detected by the kernel, including when multiple lines are being monitored by +the one request. + +The size of the kernel event buffer is fixed at the time of line request +creation, and can be influenced by the +:c:type:`request.event_buffer_size<gpio_v2_line_request>`. +The default size is 16 times the number of lines requested. + +The buffer may overflow if bursts of events occur quicker than they are read +by userspace. If an overflow occurs then the oldest buffered event is +discarded. Overflow can be detected from userspace by monitoring the event +sequence numbers. + +To minimize the number of calls required to copy events from the kernel to +userspace, `read()` supports copying multiple events. The number of events +copied is the lower of the number available in the kernel buffer and the +number that will fit in the userspace buffer (``buf``). + +Changing the edge detection flags using gpio-v2-line-set-config-ioctl.rst +does not remove or modify the events already contained in the kernel event +buffer. + +The `read()` will block if no event is available and the ``req_fd`` has not +been set **O_NONBLOCK**. + +The presence of an event can be tested for by checking that the ``req_fd`` is +readable using `poll()` or an equivalent. + +Return Value +============ + +On success the number of bytes read, which will be a multiple of the size of a +:c:type:`gpio_v2_line_event` event. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst new file mode 100644 index 00000000000000..e4e74a1926d823 --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst @@ -0,0 +1,51 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_V2_LINE_GET_VALUES_IOCTL: + +***************************** +GPIO_V2_LINE_GET_VALUES_IOCTL +***************************** + +Name +==== + +GPIO_V2_LINE_GET_VALUES_IOCTL - Get the values of requested lines. + +Synopsis +======== + +.. c:macro:: GPIO_V2_LINE_GET_VALUES_IOCTL + +``int ioctl(int req_fd, GPIO_V2_LINE_GET_VALUES_IOCTL, struct gpio_v2_line_values *values)`` + +Arguments +========= + +``req_fd`` + The file descriptor of the GPIO character device, as returned in the + :c:type:`request.fd<gpio_v2_line_request>` by gpio-v2-get-line-ioctl.rst. + +``values`` + The :c:type:`line_values<gpio_v2_line_values>` to get with the ``mask`` set + to indicate the subset of requested lines to get. + +Description +=========== + +Get the values of requested lines. + +The values of both input and output lines may be read. + +For output lines, the value returned is driver and configuration dependent and +may be either the output buffer (the last requested value set) or the input +buffer (the actual level of the line), and depending on the hardware and +configuration these may differ. + +Return Value +============ + +On success 0 and the corresponding :c:type:`values.bits<gpio_v2_line_values>` +contain the value read. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-v2-line-set-config-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-line-set-config-ioctl.rst new file mode 100644 index 00000000000000..9b942a8a53ca9a --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-v2-line-set-config-ioctl.rst @@ -0,0 +1,58 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_V2_LINE_SET_CONFIG_IOCTL: + +***************************** +GPIO_V2_LINE_SET_CONFIG_IOCTL +***************************** + +Name +==== + +GPIO_V2_LINE_SET_CONFIG_IOCTL - Update the configuration of previously requested lines. + +Synopsis +======== + +.. c:macro:: GPIO_V2_LINE_SET_CONFIG_IOCTL + +``int ioctl(int req_fd, GPIO_V2_LINE_SET_CONFIG_IOCTL, struct gpio_v2_line_config *config)`` + +Arguments +========= + +``req_fd`` + The file descriptor of the GPIO character device, as returned in the + :c:type:`request.fd<gpio_v2_line_request>` by gpio-v2-get-line-ioctl.rst. + +``config`` + The new :c:type:`configuration<gpio_v2_line_config>` to apply to the + requested lines. + +Description +=========== + +Update the configuration of previously requested lines, without releasing the +line or introducing potential glitches. + +The new configuration must specify the configuration of all requested lines. + +The same :ref:`gpio-v2-get-line-config-rules` and +:ref:`gpio-v2-get-line-config-support` that apply when requesting the lines +also apply when updating the line configuration. + +The motivating use case for this command is changing direction of +bi-directional lines between input and output, but it may also be used to +dynamically control edge detection, or more generally move lines seamlessly +from one configuration state to another. + +To only change the value of output lines, use +gpio-v2-line-set-values-ioctl.rst. + +Return Value +============ + +On success 0. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst new file mode 100644 index 00000000000000..6d2d1886950b6b --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst @@ -0,0 +1,47 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_V2_LINE_SET_VALUES_IOCTL: + +***************************** +GPIO_V2_LINE_SET_VALUES_IOCTL +***************************** + +Name +==== + +GPIO_V2_LINE_SET_VALUES_IOCTL - Set the values of requested output lines. + +Synopsis +======== + +.. c:macro:: GPIO_V2_LINE_SET_VALUES_IOCTL + +``int ioctl(int req_fd, GPIO_V2_LINE_SET_VALUES_IOCTL, struct gpio_v2_line_values *values)`` + +Arguments +========= + +``req_fd`` + The file descriptor of the GPIO character device, as returned in the + :c:type:`request.fd<gpio_v2_line_request>` by gpio-v2-get-line-ioctl.rst. + +``values`` + The :c:type:`line_values<gpio_v2_line_values>` to set with the ``mask`` set + to indicate the subset of requested lines to set and ``bits`` set to + indicate the new value. + +Description +=========== + +Set the values of requested output lines. + +Only the values of output lines may be set. +Attempting to set the value of an input line is an error (**EPERM**). + +Return Value +============ + +On success 0. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/gpio-v2-lineinfo-changed-read.rst b/Documentation/userspace-api/gpio/gpio-v2-lineinfo-changed-read.rst new file mode 100644 index 00000000000000..24ad325e725353 --- /dev/null +++ b/Documentation/userspace-api/gpio/gpio-v2-lineinfo-changed-read.rst @@ -0,0 +1,81 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _GPIO_V2_LINEINFO_CHANGED_READ: + +***************************** +GPIO_V2_LINEINFO_CHANGED_READ +***************************** + +Name +==== + +GPIO_V2_LINEINFO_CHANGED_READ - Read line info changed events for watched +lines from the chip. + +Synopsis +======== + +``int read(int chip_fd, void *buf, size_t count)`` + +Arguments +========= + +``chip_fd`` + The file descriptor of the GPIO character device returned by `open()`. + +``buf`` + The buffer to contain the :c:type:`events<gpio_v2_line_info_changed>`. + +``count`` + The number of bytes available in ``buf``, which must be at least the size + of a :c:type:`gpio_v2_line_info_changed` event. + +Description +=========== + +Read line info changed events for watched lines from the chip. + +.. note:: + Monitoring line info changes is not generally required, and would typically + only be performed by a system monitoring component. + + These events relate to changes in a line's request state or configuration, + not its value. Use gpio-v2-line-event-read.rst to receive events when a + line changes value. + +A line must be watched using gpio-v2-get-lineinfo-watch-ioctl.rst to generate +info changed events. Subsequently, a request, release, or reconfiguration +of the line will generate an info changed event. + +The kernel timestamps events when they occur and stores them in a buffer +from where they can be read by userspace at its convenience using `read()`. + +The size of the kernel event buffer is fixed at 32 events per ``chip_fd``. + +The buffer may overflow if bursts of events occur quicker than they are read +by userspace. If an overflow occurs then the most recent event is discarded. +Overflow cannot be detected from userspace. + +Events read from the buffer are always in the same order that they were +detected by the kernel, including when multiple lines are being monitored by +the one ``chip_fd``. + +To minimize the number of calls required to copy events from the kernel to +userspace, `read()` supports copying multiple events. The number of events +copied is the lower of the number available in the kernel buffer and the +number that will fit in the userspace buffer (``buf``). + +A `read()` will block if no event is available and the ``chip_fd`` has not +been set **O_NONBLOCK**. + +The presence of an event can be tested for by checking that the ``chip_fd`` is +readable using `poll()` or an equivalent. + +Return Value +============ + +On success the number of bytes read, which will be a multiple of the size +of a :c:type:`gpio_v2_line_info_changed` event. + +On error -1 and the ``errno`` variable is set appropriately. +Common error codes are described in error-codes.rst. diff --git a/Documentation/userspace-api/gpio/index.rst b/Documentation/userspace-api/gpio/index.rst new file mode 100644 index 00000000000000..f258de4ef370f7 --- /dev/null +++ b/Documentation/userspace-api/gpio/index.rst @@ -0,0 +1,18 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==== +GPIO +==== + +.. toctree:: + :maxdepth: 1 + + Character Device Userspace API <chardev> + Obsolete Userspace APIs <obsolete> + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/userspace-api/gpio/obsolete.rst b/Documentation/userspace-api/gpio/obsolete.rst new file mode 100644 index 00000000000000..c42538b44ec8cc --- /dev/null +++ b/Documentation/userspace-api/gpio/obsolete.rst @@ -0,0 +1,11 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================ +Obsolete GPIO Userspace APIs +============================ + +.. toctree:: + :maxdepth: 1 + + Character Device Userspace API (v1) <chardev_v1> + Sysfs Interface <sysfs> diff --git a/Documentation/admin-guide/gpio/sysfs.rst b/Documentation/userspace-api/gpio/sysfs.rst index 35171d15f78d46..116921048b18e9 100644 --- a/Documentation/admin-guide/gpio/sysfs.rst +++ b/Documentation/userspace-api/gpio/sysfs.rst @@ -2,18 +2,18 @@ GPIO Sysfs Interface for Userspace ================================== .. warning:: + This API is obsoleted by the chardev.rst and the ABI documentation has + been moved to Documentation/ABI/obsolete/sysfs-gpio. - THIS ABI IS DEPRECATED, THE ABI DOCUMENTATION HAS BEEN MOVED TO - Documentation/ABI/obsolete/sysfs-gpio AND NEW USERSPACE CONSUMERS - ARE SUPPOSED TO USE THE CHARACTER DEVICE ABI. THIS OLD SYSFS ABI WILL - NOT BE DEVELOPED (NO NEW FEATURES), IT WILL JUST BE MAINTAINED. + New developments should use the chardev.rst, and existing developments are + encouraged to migrate as soon as possible, as this API will be removed + in the future. -Refer to the examples in tools/gpio/* for an introduction to the new -character device ABI. Also see the userspace header in -include/uapi/linux/gpio.h + This interface will continue to be maintained for the migration period, + but new features will only be added to the new API. -The deprecated sysfs ABI ------------------------- +The obsolete sysfs ABI +---------------------- Platforms which use the "gpiolib" implementors framework may choose to configure a sysfs user interface to GPIOs. This is different from the debugfs interface, since it provides control over GPIO direction and @@ -33,9 +33,12 @@ userspace GPIO can be used to determine system configuration data that standard kernels won't know about. And for some tasks, simple userspace GPIO drivers could be all that the system really needs. -DO NOT ABUSE SYSFS TO CONTROL HARDWARE THAT HAS PROPER KERNEL DRIVERS. -PLEASE READ THE DOCUMENT AT Documentation/driver-api/gpio/drivers-on-gpio.rst -TO AVOID REINVENTING KERNEL WHEELS IN USERSPACE. I MEAN IT. REALLY. +.. note:: + Do NOT abuse sysfs to control hardware that has proper kernel drivers. + Please read Documentation/driver-api/gpio/drivers-on-gpio.rst + to avoid reinventing kernel wheels in userspace. + + I MEAN IT. REALLY. Paths in Sysfs -------------- @@ -84,9 +87,9 @@ and have the following read/write attributes: allow userspace to reconfigure this GPIO's direction. "value" ... - reads as either 0 (low) or 1 (high). If the GPIO + reads as either 0 (inactive) or 1 (active). If the GPIO is configured as an output, this value may be written; - any nonzero value is treated as high. + any nonzero value is treated as active. If the pin can be configured as interrupt-generating interrupt and if it has been configured to generate interrupts (see the diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst index 67d663cf2ff263..afecfe3cc4a86b 100644 --- a/Documentation/userspace-api/index.rst +++ b/Documentation/userspace-api/index.rst @@ -42,6 +42,7 @@ Devices and I/O accelerators/ocxl dma-buf-alloc-exchange + gpio/index iommu iommufd media/index diff --git a/Documentation/userspace-api/landlock.rst b/Documentation/userspace-api/landlock.rst index 2e38226770615d..9dd636aaa829fd 100644 --- a/Documentation/userspace-api/landlock.rst +++ b/Documentation/userspace-api/landlock.rst @@ -19,11 +19,12 @@ unexpected/malicious behaviors in user space applications. Landlock empowers any process, including unprivileged ones, to securely restrict themselves. We can quickly make sure that Landlock is enabled in the running system by -looking for "landlock: Up and running" in kernel logs (as root): ``dmesg | grep -landlock || journalctl -kg landlock`` . Developers can also easily check for -Landlock support with a :ref:`related system call <landlock_abi_versions>`. If -Landlock is not currently supported, we need to :ref:`configure the kernel -appropriately <kernel_support>`. +looking for "landlock: Up and running" in kernel logs (as root): +``dmesg | grep landlock || journalctl -kb -g landlock`` . +Developers can also easily check for Landlock support with a +:ref:`related system call <landlock_abi_versions>`. +If Landlock is not currently supported, we need to +:ref:`configure the kernel appropriately <kernel_support>`. Landlock rules ============== @@ -499,6 +500,9 @@ access rights. Kernel support ============== +Build time configuration +------------------------ + Landlock was first introduced in Linux 5.13 but it must be configured at build time with ``CONFIG_SECURITY_LANDLOCK=y``. Landlock must also be enabled at boot time as the other security modules. The list of security modules enabled by @@ -507,11 +511,52 @@ contains ``CONFIG_LSM=landlock,[...]`` with ``[...]`` as the list of other potentially useful security modules for the running system (see the ``CONFIG_LSM`` help). +Boot time configuration +----------------------- + If the running kernel does not have ``landlock`` in ``CONFIG_LSM``, then we can -still enable it by adding ``lsm=landlock,[...]`` to -Documentation/admin-guide/kernel-parameters.rst thanks to the bootloader +enable Landlock by adding ``lsm=landlock,[...]`` to +Documentation/admin-guide/kernel-parameters.rst in the boot loader configuration. +For example, if the current built-in configuration is: + +.. code-block:: console + + $ zgrep -h "^CONFIG_LSM=" "/boot/config-$(uname -r)" /proc/config.gz 2>/dev/null + CONFIG_LSM="lockdown,yama,integrity,apparmor" + +...and if the cmdline doesn't contain ``landlock`` either: + +.. code-block:: console + + $ sed -n 's/.*\(\<lsm=\S\+\).*/\1/p' /proc/cmdline + lsm=lockdown,yama,integrity,apparmor + +...we should configure the boot loader to set a cmdline extending the ``lsm`` +list with the ``landlock,`` prefix:: + + lsm=landlock,lockdown,yama,integrity,apparmor + +After a reboot, we can check that Landlock is up and running by looking at +kernel logs: + +.. code-block:: console + + # dmesg | grep landlock || journalctl -kb -g landlock + [ 0.000000] Command line: [...] lsm=landlock,lockdown,yama,integrity,apparmor + [ 0.000000] Kernel command line: [...] lsm=landlock,lockdown,yama,integrity,apparmor + [ 0.000000] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,apparmor + [ 0.000000] landlock: Up and running. + +The kernel may be configured at build time to always load the ``lockdown`` and +``capability`` LSMs. In that case, these LSMs will appear at the beginning of +the ``LSM: initializing`` log line as well, even if they are not configured in +the boot loader. + +Network support +--------------- + To be able to explicitly allow TCP operations (e.g., adding a network rule with ``LANDLOCK_ACCESS_NET_BIND_TCP``), the kernel must support TCP (``CONFIG_INET=y``). Otherwise, sys_landlock_add_rule() returns an diff --git a/Documentation/userspace-api/media/drivers/ccs.rst b/Documentation/userspace-api/media/drivers/ccs.rst index 161cb65f4d98a6..03015b33d5abbe 100644 --- a/Documentation/userspace-api/media/drivers/ccs.rst +++ b/Documentation/userspace-api/media/drivers/ccs.rst @@ -2,6 +2,8 @@ .. include:: <isonum.txt> +.. _media-ccs-uapi: + MIPI CCS camera sensor driver ============================= @@ -13,6 +15,8 @@ the binner and the scaler. As the capabilities of individual devices vary, the driver exposes interfaces based on the capabilities that exist in hardware. +Also see :ref:`the CCS driver kernel documentation <media-ccs-driver>`. + Pixel Array sub-device ---------------------- @@ -30,7 +34,7 @@ that purpose, selection target ``V4L2_SEL_TGT_COMPOSE`` is supported on the sink pad (0). Additionally, if a device has no scaler or digital crop functionality, the -source pad (1) expses another digital crop selection rectangle that can only +source pad (1) exposes another digital crop selection rectangle that can only crop at the end of the lines and frames. Scaler diff --git a/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst b/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst index b97d56ee543cf5..ffe8325749e5f4 100644 --- a/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst +++ b/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst @@ -23,3 +23,4 @@ DVB-S2, DVB-T2, ISDB, etc. :maxdepth: 1 frontend_legacy_dvbv3_api + legacy_dvb_decoder_api diff --git a/Documentation/userspace-api/media/dvb/legacy_dvb_audio.rst b/Documentation/userspace-api/media/dvb/legacy_dvb_audio.rst new file mode 100644 index 00000000000000..b46fe2becd029f --- /dev/null +++ b/Documentation/userspace-api/media/dvb/legacy_dvb_audio.rst @@ -0,0 +1,1642 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later OR GPL-2.0 + +.. c:namespace:: dtv.legacy.audio + +.. _dvb_audio: + +================ +DVB Audio Device +================ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +The DVB audio device controls the MPEG2 audio decoder of the DVB +hardware. It can be accessed through ``/dev/dvb/adapter?/audio?``. Data +types and ioctl definitions can be accessed by including +``linux/dvb/audio.h`` in your application. + +Please note that most DVB cards don’t have their own MPEG decoder, which +results in the omission of the audio and video device. + +These ioctls were also used by V4L2 to control MPEG decoders implemented +in V4L2. The use of these ioctls for that purpose has been made obsolete +and proper V4L2 ioctls or controls have been created to replace that +functionality. Use :ref:`V4L2 ioctls<audio>` for new drivers! + + +Audio Data Types +================ + +This section describes the structures, data types and defines used when +talking to the audio device. + + +----- + + +audio_stream_source_t +--------------------- + +Synopsis +~~~~~~~~ + +.. c:enum:: audio_stream_source_t + +.. code-block:: c + + typedef enum { + AUDIO_SOURCE_DEMUX, + AUDIO_SOURCE_MEMORY + } audio_stream_source_t; + +Constants +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``AUDIO_SOURCE_DEMUX`` + + - :cspan:`1` Selects the demultiplexer (fed either by the frontend + or the DVR device) as the source of the video stream. + + - .. + + - ``AUDIO_SOURCE_MEMORY`` + + - Selects the stream from the application that comes through + the `write()`_ system call. + +Description +~~~~~~~~~~~ + +The audio stream source is set through the `AUDIO_SELECT_SOURCE`_ call +and can take the following values, depending on whether we are replaying +from an internal (demux) or external (user write) source. + +The data fed to the decoder is also controlled by the PID-filter. +Output selection: :c:type:`dmx_output` ``DMX_OUT_DECODER``. + + +----- + + +audio_play_state_t +------------------ + +Synopsis +~~~~~~~~ + +.. c:enum:: audio_play_state_t + +.. code-block:: c + + typedef enum { + AUDIO_STOPPED, + AUDIO_PLAYING, + AUDIO_PAUSED + } audio_play_state_t; + +Constants +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``AUDIO_STOPPED`` + + - Audio is stopped. + + - .. + + - ``AUDIO_PLAYING`` + + - Audio is currently playing. + + - .. + + - ``AUDIO_PAUSE`` + + - Audio is frozen. + +Description +~~~~~~~~~~~ + +This values can be returned by the `AUDIO_GET_STATUS`_ call +representing the state of audio playback. + + +----- + + +audio_channel_select_t +---------------------- + +Synopsis +~~~~~~~~ + +.. c:enum:: audio_channel_select_t + +.. code-block:: c + + typedef enum { + AUDIO_STEREO, + AUDIO_MONO_LEFT, + AUDIO_MONO_RIGHT, + AUDIO_MONO, + AUDIO_STEREO_SWAPPED + } audio_channel_select_t; + +Constants +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``AUDIO_STEREO`` + + - Stereo. + + - .. + + - ``AUDIO_MONO_LEFT`` + + - Mono, select left stereo channel as source. + + - .. + + - ``AUDIO_MONO_RIGHT`` + + - Mono, select right stereo channel as source. + + - .. + + - ``AUDIO_MONO`` + + - Mono source only. + + - .. + + - ``AUDIO_STEREO_SWAPPED`` + + - Stereo, swap L & R. + +Description +~~~~~~~~~~~ + +The audio channel selected via `AUDIO_CHANNEL_SELECT`_ is determined by +this values. + + +----- + + +audio_mixer_t +------------- + +Synopsis +~~~~~~~~ + +.. c:struct:: audio_mixer + +.. code-block:: c + + typedef struct audio_mixer { + unsigned int volume_left; + unsigned int volume_right; + } audio_mixer_t; + +Variables +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``unsigned int volume_left`` + + - Volume left channel. + Valid range: 0 ... 255 + + - .. + + - ``unsigned int volume_right`` + + - Volume right channel. + Valid range: 0 ... 255 + +Description +~~~~~~~~~~~ + +This structure is used by the `AUDIO_SET_MIXER`_ call to set the +audio volume. + + +----- + + +audio_status +------------ + +Synopsis +~~~~~~~~ + +.. c:struct:: audio_status + +.. code-block:: c + + typedef struct audio_status { + int AV_sync_state; + int mute_state; + audio_play_state_t play_state; + audio_stream_source_t stream_source; + audio_channel_select_t channel_select; + int bypass_mode; + audio_mixer_t mixer_state; + } audio_status_t; + +Variables +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - :rspan:`2` ``int AV_sync_state`` + + - :cspan:`1` Shows if A/V synchronization is ON or OFF. + + - .. + + - TRUE ( != 0 ) + + - AV-sync ON. + + - .. + + - FALSE ( == 0 ) + + - AV-sync OFF. + + - .. + + - :rspan:`2` ``int mute_state`` + + - :cspan:`1` Indicates if audio is muted or not. + + - .. + + - TRUE ( != 0 ) + + - mute audio + + - .. + + - FALSE ( == 0 ) + + - unmute audio + + - .. + + - `audio_play_state_t`_ ``play_state`` + + - Current playback state. + + - .. + + - `audio_stream_source_t`_ ``stream_source`` + + - Current source of the data. + + - .. + + - :rspan:`2` ``int bypass_mode`` + + - :cspan:`1` Is the decoding of the current Audio stream in + the DVB subsystem enabled or disabled. + + - .. + + - TRUE ( != 0 ) + + - Bypass disabled. + + - .. + + - FALSE ( == 0 ) + + - Bypass enabled. + + - .. + + - `audio_mixer_t`_ ``mixer_state`` + + - Current volume settings. + +Description +~~~~~~~~~~~ + +The `AUDIO_GET_STATUS`_ call returns this structure as information +about various states of the playback operation. + + +----- + + +audio encodings +--------------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + #define AUDIO_CAP_DTS 1 + #define AUDIO_CAP_LPCM 2 + #define AUDIO_CAP_MP1 4 + #define AUDIO_CAP_MP2 8 + #define AUDIO_CAP_MP3 16 + #define AUDIO_CAP_AAC 32 + #define AUDIO_CAP_OGG 64 + #define AUDIO_CAP_SDDS 128 + #define AUDIO_CAP_AC3 256 + +Constants +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``AUDIO_CAP_DTS`` + + - :cspan:`1` The hardware accepts DTS audio tracks. + + - .. + + - ``AUDIO_CAP_LPCM`` + + - The hardware accepts uncompressed audio with + Linear Pulse-Code Modulation (LPCM) + + - .. + + - ``AUDIO_CAP_MP1`` + + - The hardware accepts MPEG-1 Audio Layer 1. + + - .. + + - ``AUDIO_CAP_MP2`` + + - The hardware accepts MPEG-1 Audio Layer 2. + Also known as MUSICAM. + + - .. + + - ``AUDIO_CAP_MP3`` + + - The hardware accepts MPEG-1 Audio Layer III. + Commomly known as .mp3. + + - .. + + - ``AUDIO_CAP_AAC`` + + - The hardware accepts AAC (Advanced Audio Coding). + + - .. + + - ``AUDIO_CAP_OGG`` + + - The hardware accepts Vorbis audio tracks. + + - .. + + - ``AUDIO_CAP_SDDS`` + + - The hardware accepts Sony Dynamic Digital Sound (SDDS). + + - .. + + - ``AUDIO_CAP_AC3`` + + - The hardware accepts Dolby Digital ATSC A/52 audio. + Also known as AC-3. + +Description +~~~~~~~~~~~ + +A call to `AUDIO_GET_CAPABILITIES`_ returns an unsigned integer with the +following bits set according to the hardwares capabilities. + + +----- + + +Audio Function Calls +==================== + + +AUDIO_STOP +---------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_STOP + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_STOP) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - File descriptor returned by a previous call to `open()`_. + + - .. + + - ``int request`` + + - :cspan:`1` Equals ``AUDIO_STOP`` for this command. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the Audio Device to stop playing the current +stream. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_PLAY +---------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_PLAY + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_PLAY) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - File descriptor returned by a previous call to `open()`_. + + - .. + + - ``int request`` + + - :cspan:`1` Equals ``AUDIO_PLAY`` for this command. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the Audio Device to start playing an audio stream +from the selected source. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_PAUSE +----------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_PAUSE + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_PAUSE) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``AUDIO_PAUSE`` for this command. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call suspends the audio stream being played. Decoding and +playing are paused. It is then possible to restart again decoding and +playing process of the audio stream using `AUDIO_CONTINUE`_ command. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_CONTINUE +-------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_CONTINUE + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_CONTINUE) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``AUDIO_CONTINUE`` for this command. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl restarts the decoding and playing process previously paused +with `AUDIO_PAUSE`_ command. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_SELECT_SOURCE +------------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_SELECT_SOURCE + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_SELECT_SOURCE, + audio_stream_source_t source) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``AUDIO_SELECT_SOURCE`` for this command. + + - .. + + - `audio_stream_source_t`_ ``source`` + + - Indicates the source that shall be used for the Audio stream. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call informs the audio device which source shall be used for +the input data. The possible sources are demux or memory. If +``AUDIO_SOURCE_MEMORY`` is selected, the data is fed to the Audio Device +through the write command. If ``AUDIO_SOURCE_DEMUX`` is selected, the data +is directly transferred from the onboard demux-device to the decoder. +Note: This only supports DVB-devices with one demux and one decoder so far. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_SET_MUTE +-------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_SET_MUTE + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_SET_MUTE, int state) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - :cspan:`1` Equals ``AUDIO_SET_MUTE`` for this command. + + - .. + + - :rspan:`2` ``int state`` + + - :cspan:`1` Indicates if audio device shall mute or not. + + - .. + + - TRUE ( != 0 ) + + - mute audio + + - .. + + - FALSE ( == 0 ) + + - unmute audio + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl is for DVB devices only. To control a V4L2 decoder use the +V4L2 :ref:`VIDIOC_DECODER_CMD` with the +``V4L2_DEC_CMD_START_MUTE_AUDIO`` flag instead. + +This ioctl call asks the audio device to mute the stream that is +currently being played. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_SET_AV_SYNC +----------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_SET_AV_SYNC + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_SET_AV_SYNC, int state) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - :cspan:`1` Equals ``AUDIO_AV_SYNC`` for this command. + + - .. + + - :rspan:`2` ``int state`` + + - :cspan:`1` Tells the DVB subsystem if A/V synchronization + shall be ON or OFF. + + - .. + + - TRUE ( != 0 ) + + - AV-sync ON. + + - .. + + - FALSE ( == 0 ) + + - AV-sync OFF. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the Audio Device to turn ON or OFF A/V +synchronization. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_SET_BYPASS_MODE +--------------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_SET_BYPASS_MODE + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_SET_BYPASS_MODE, int mode) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - :cspan:`1` Equals ``AUDIO_SET_BYPASS_MODE`` for this command. + + - .. + + - :rspan:`2` ``int mode`` + + - :cspan:`1` Enables or disables the decoding of the current + Audio stream in the DVB subsystem. + - .. + + - TRUE ( != 0 ) + + - Disable bypass + + - .. + + - FALSE ( == 0 ) + + - Enable bypass + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the Audio Device to bypass the Audio decoder and +forward the stream without decoding. This mode shall be used if streams +that can’t be handled by the DVB system shall be decoded. Dolby +DigitalTM streams are automatically forwarded by the DVB subsystem if +the hardware can handle it. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_CHANNEL_SELECT +-------------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_CHANNEL_SELECT + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_CHANNEL_SELECT, + audio_channel_select_t) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``AUDIO_CHANNEL_SELECT`` for this command. + + - .. + + - `audio_channel_select_t`_ ``ch`` + + - Select the output format of the audio (mono left/right, stereo). + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl is for DVB devices only. To control a V4L2 decoder use the +V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK`` control instead. + +This ioctl call asks the Audio Device to select the requested channel if +possible. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_GET_STATUS +---------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_GET_STATUS + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_GET_STATUS, + struct audio_status *status) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals AUDIO_GET_STATUS for this command. + + - .. + + - ``struct`` `audio_status`_ ``*status`` + + - Returns the current state of Audio Device. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the Audio Device to return the current state of the +Audio Device. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_GET_CAPABILITIES +---------------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_GET_CAPABILITIES + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_GET_CAPABILITIES, + unsigned int *cap) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``AUDIO_GET_CAPABILITIES`` for this command. + + - .. + + - ``unsigned int *cap`` + + - Returns a bit array of supported sound formats. + Bits are defined in `audio encodings`_. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the Audio Device to tell us about the decoding +capabilities of the audio hardware. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_CLEAR_BUFFER +------------------ + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_CLEAR_BUFFER + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_CLEAR_BUFFER) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``AUDIO_CLEAR_BUFFER`` for this command. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the Audio Device to clear all software and hardware +buffers of the audio decoder device. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_SET_ID +------------ + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_SET_ID + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_SET_ID, int id) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``AUDIO_SET_ID`` for this command. + + - .. + + - ``int id`` + + - Audio sub-stream id. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl selects which sub-stream is to be decoded if a program or +system stream is sent to the video device. + +If no audio stream type is set the id has to be in range [0xC0,0xDF] +for MPEG sound, in [0x80,0x87] for AC3 and in [0xA0,0xA7] for LPCM. +See ITU-T H.222.0 | ISO/IEC 13818-1 for further description. + +If the stream type is set with `AUDIO_SET_STREAMTYPE`_, specifies the +id just the sub-stream id of the audio stream and only the first 5 bits +(& 0x1F) are recognized. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_SET_MIXER +--------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_SET_MIXER + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_SET_MIXER, audio_mixer_t *mix) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``AUDIO_SET_MIXER`` for this command. + + - .. + + - ``audio_mixer_t *mix`` + + - Mixer settings. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl lets you adjust the mixer settings of the audio decoder. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +AUDIO_SET_STREAMTYPE +-------------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_SET_STREAMTYPE + +.. code-block:: c + + int ioctl(fd, int request = AUDIO_SET_STREAMTYPE, int type) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``AUDIO_SET_STREAMTYPE`` for this command. + + - .. + + - ``int type`` + + - Stream type. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl tells the driver which kind of audio stream to expect. This +is useful if the stream offers several audio sub-streams like LPCM and +AC3. + +Stream types defined in ITU-T H.222.0 | ISO/IEC 13818-1 are used. + + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``EINVAL`` + + - Type is not a valid or supported stream type. + + +----- + + +AUDIO_BILINGUAL_CHANNEL_SELECT +------------------------------ + +Synopsis +~~~~~~~~ + +.. c:macro:: AUDIO_BILINGUAL_CHANNEL_SELECT + +.. code-block:: c + + int ioctl(int fd, int request = AUDIO_BILINGUAL_CHANNEL_SELECT, + audio_channel_select_t) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``AUDIO_BILINGUAL_CHANNEL_SELECT`` for this command. + + - .. + + - ``audio_channel_select_t ch`` + + - Select the output format of the audio (mono left/right, stereo). + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl has been replaced by the V4L2 +``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK`` control +for MPEG decoders controlled through V4L2. + +This ioctl call asks the Audio Device to select the requested channel +for bilingual streams if possible. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +open() +------ + +Synopsis +~~~~~~~~ + +.. code-block:: c + + #include <fcntl.h> + +.. c:function:: int open(const char *deviceName, int flags) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``const char *deviceName`` + + - Name of specific audio device. + + - .. + + - :rspan:`3` ``int flags`` + + - :cspan:`1` A bit-wise OR of the following flags: + + - .. + + - ``O_RDONLY`` + + - read-only access + + - .. + + - ``O_RDWR`` + + - read/write access + + - .. + + - ``O_NONBLOCK`` + - | Open in non-blocking mode + | (blocking mode is the default) + +Description +~~~~~~~~~~~ + +This system call opens a named audio device (e.g. +``/dev/dvb/adapter0/audio0``) for subsequent use. When an open() call has +succeeded, the device will be ready for use. The significance of +blocking or non-blocking mode is described in the documentation for +functions where there is a difference. It does not affect the semantics +of the open() call itself. A device opened in blocking mode can later be +put into non-blocking mode (and vice versa) using the F_SETFL command +of the fcntl system call. This is a standard system call, documented in +the Linux manual page for fcntl. Only one user can open the Audio Device +in O_RDWR mode. All other attempts to open the device in this mode will +fail, and an error code will be returned. If the Audio Device is opened +in O_RDONLY mode, the only ioctl call that can be used is +`AUDIO_GET_STATUS`_. All other call will return with an error code. + +Return Value +~~~~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``ENODEV`` + + - Device driver not loaded/available. + + - .. + + - ``EBUSY`` + + - Device or resource busy. + + - .. + + - ``EINVAL`` + + - Invalid argument. + + +----- + + +close() +------- + +Synopsis +~~~~~~~~ + +.. c:function:: int close(int fd) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + +Description +~~~~~~~~~~~ + +This system call closes a previously opened audio device. + +Return Value +~~~~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``EBADF`` + + - Fd is not a valid open file descriptor. + +----- + + +write() +------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + size_t write(int fd, const void *buf, size_t count) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``void *buf`` + + - Pointer to the buffer containing the PES data. + + - .. + + - ``size_t count`` + + - Size of buf. + +Description +~~~~~~~~~~~ + +This system call can only be used if ``AUDIO_SOURCE_MEMORY`` is selected +in the ioctl call `AUDIO_SELECT_SOURCE`_. The data provided shall be in +PES format. If ``O_NONBLOCK`` is not specified the function will block +until buffer space is available. The amount of data to be transferred is +implied by count. + +Return Value +~~~~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``EPERM`` + + - :cspan:`1` Mode ``AUDIO_SOURCE_MEMORY`` not selected. + + - .. + + - ``ENOMEM`` + + - Attempted to write more data than the internal buffer can hold. + + - .. + + - ``EBADF`` + + - Fd is not a valid open file descriptor. diff --git a/Documentation/userspace-api/media/dvb/legacy_dvb_decoder_api.rst b/Documentation/userspace-api/media/dvb/legacy_dvb_decoder_api.rst new file mode 100644 index 00000000000000..f58985a6e63c63 --- /dev/null +++ b/Documentation/userspace-api/media/dvb/legacy_dvb_decoder_api.rst @@ -0,0 +1,61 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later OR GPL-2.0 + +.. _legacy_dvb_decoder_api: + +============================ +Legacy DVB MPEG Decoder APIs +============================ + +.. _legacy_dvb_decoder_notes: + +General Notes +============= + +This API has originally been designed for DVB only and is therefore limited to +the :ref:`legacy_dvb_decoder_formats` used in such digital TV-broadcastsystems. + +To circumvent this limitations the more versatile :ref:`V4L2 <v4l2spec>` API has +been designed. Which replaces this part of the DVB API. + +Nevertheless there have been projects build around this API. +To ensure compatibility this API is kept as it is. + +.. attention:: Do **not** use this API in new drivers! + + For audio and video use the :ref:`V4L2 <v4l2spec>` and ALSA APIs. + + Pipelines should be set up using the :ref:`Media Controller API<media_controller>`. + +Practically the decoders seem to be treated differently. The application typically +knows which decoder is in use or it is specially written for one decoder type. +Querying capabilities are rarely used because they are already known. + + +.. _legacy_dvb_decoder_formats: + +Data Formats +============ + +The API has been designed for DVB and compatible broadcastsystems. +Because of that fact the only supported data formats are ISO/IEC 13818-1 +compatible MPEG streams. The supported payloads may vary depending on the +used decoder. + +Timestamps are always MPEG PTS as defined in ITU T-REC-H.222.0 / +ISO/IEC 13818-1, if not otherwise noted. + +For storing recordings typically TS streams are used, in lesser extent PES. +Both variants are commonly accepted for playback, but it may be driver dependent. + + + + +Table of Contents +================= + +.. toctree:: + :maxdepth: 2 + + legacy_dvb_video + legacy_dvb_audio + legacy_dvb_osd diff --git a/Documentation/userspace-api/media/dvb/legacy_dvb_osd.rst b/Documentation/userspace-api/media/dvb/legacy_dvb_osd.rst new file mode 100644 index 00000000000000..179b66a8016a1b --- /dev/null +++ b/Documentation/userspace-api/media/dvb/legacy_dvb_osd.rst @@ -0,0 +1,883 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later OR GPL-2.0 + +.. c:namespace:: dtv.legacy.osd + +.. _dvb_osd: + +============== +DVB OSD Device +============== + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +The DVB OSD device controls the OnScreen-Display of the AV7110 based +DVB-cards with hardware MPEG2 decoder. It can be accessed through +``/dev/dvb/adapter?/osd0``. +Data types and ioctl definitions can be accessed by including +``linux/dvb/osd.h`` in your application. + +The OSD is not a frame-buffer like on many other cards. +It is a kind of canvas one can draw on. +The color-depth is limited depending on the memory size installed. +An appropriate palette of colors has to be set up. +The installed memory size can be identified with the `OSD_GET_CAPABILITY`_ +ioctl. + +OSD Data Types +============== + +OSD_Command +----------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + typedef enum { + /* All functions return -2 on "not open" */ + OSD_Close = 1, + OSD_Open, + OSD_Show, + OSD_Hide, + OSD_Clear, + OSD_Fill, + OSD_SetColor, + OSD_SetPalette, + OSD_SetTrans, + OSD_SetPixel, + OSD_GetPixel, + OSD_SetRow, + OSD_SetBlock, + OSD_FillRow, + OSD_FillBlock, + OSD_Line, + OSD_Query, + OSD_Test, + OSD_Text, + OSD_SetWindow, + OSD_MoveWindow, + OSD_OpenRaw, + } OSD_Command; + +Commands +~~~~~~~~ + +.. note:: All functions return -2 on "not open" + +.. flat-table:: + :header-rows: 1 + :stub-columns: 0 + + - .. + + - Command + + - | Used variables of ``struct`` `osd_cmd_t`_. + | Usage{variable} if alternative use. + + - :cspan:`2` Description + + + + - .. + + - ``OSD_Close`` + + - - + + - | Disables OSD and releases the buffers. + | Returns 0 on success. + + - .. + + - ``OSD_Open`` + + - | x0,y0,x1,y1, + | BitPerPixel[2/4/8]{color&0x0F}, + | mix[0..15]{color&0xF0} + + - | Opens OSD with this size and bit depth + | Returns 0 on success, + | -1 on DRAM allocation error, + | -2 on "already open". + + - .. + + - ``OSD_Show`` + + - - + + - | Enables OSD mode. + | Returns 0 on success. + + - .. + + - ``OSD_Hide`` + + - - + + - | Disables OSD mode. + | Returns 0 on success. + + - .. + + - ``OSD_Clear`` + + - - + + - | Sets all pixel to color 0. + | Returns 0 on success. + + - .. + + - ``OSD_Fill`` + + - color + + - | Sets all pixel to color <color>. + | Returns 0 on success. + + - .. + + - ``OSD_SetColor`` + + - | color, + | R{x0},G{y0},B{x1}, + | opacity{y1} + + - | Set palette entry <num> to <r,g,b>, <mix> and <trans> apply + | R,G,B: 0..255 + | R=Red, G=Green, B=Blue + | opacity=0: pixel opacity 0% (only video pixel shows) + | opacity=1..254: pixel opacity as specified in header + | opacity=255: pixel opacity 100% (only OSD pixel shows) + | Returns 0 on success, -1 on error. + + - .. + + - ``OSD_SetPalette`` + + - | firstcolor{color}, + | lastcolor{x0},data + + - | Set a number of entries in the palette. + | Sets the entries "firstcolor" through "lastcolor" from the + array "data". + | Data has 4 byte for each color: + | R,G,B, and a opacity value: 0->transparent, 1..254->mix, + 255->pixel + + - .. + + - ``OSD_SetTrans`` + + - transparency{color} + + - | Sets transparency of mixed pixel (0..15). + | Returns 0 on success. + + - .. + + - ``OSD_SetPixel`` + + - x0,y0,color + + - | Sets pixel <x>,<y> to color number <color>. + | Returns 0 on success, -1 on error. + + - .. + + - ``OSD_GetPixel`` + + - x0,y0 + + - | Returns color number of pixel <x>,<y>, or -1. + | Command currently not supported by the AV7110! + + - .. + + - ``OSD_SetRow`` + + - x0,y0,x1,data + + - | Fills pixels x0,y through x1,y with the content of data[]. + | Returns 0 on success, -1 on clipping all pixel (no pixel + drawn). + + - .. + + - ``OSD_SetBlock`` + + - | x0,y0,x1,y1, + | increment{color}, + | data + + - | Fills pixels x0,y0 through x1,y1 with the content of data[]. + | Inc contains the width of one line in the data block, + | inc<=0 uses block width as line width. + | Returns 0 on success, -1 on clipping all pixel. + + - .. + + - ``OSD_FillRow`` + + - x0,y0,x1,color + + - | Fills pixels x0,y through x1,y with the color <color>. + | Returns 0 on success, -1 on clipping all pixel. + + - .. + + - ``OSD_FillBlock`` + + - x0,y0,x1,y1,color + + - | Fills pixels x0,y0 through x1,y1 with the color <color>. + | Returns 0 on success, -1 on clipping all pixel. + + - .. + + - ``OSD_Line`` + + - x0,y0,x1,y1,color + + - | Draw a line from x0,y0 to x1,y1 with the color <color>. + | Returns 0 on success. + + - .. + + - ``OSD_Query`` + + - | x0,y0,x1,y1, + | xasp{color}; yasp=11 + + - | Fills parameters with the picture dimensions and the pixel + aspect ratio. + | Returns 0 on success. + | Command currently not supported by the AV7110! + + - .. + + - ``OSD_Test`` + + - - + + - | Draws a test picture. + | For debugging purposes only. + | Returns 0 on success. + - .. + + - ``OSD_Text`` + + - x0,y0,size,color,text + + - Draws a text at position x0,y0 with the color <color>. + + - .. + + - ``OSD_SetWindow`` + + - x0 + + - Set window with number 0<x0<8 as current. + + - .. + + - ``OSD_MoveWindow`` + + - x0,y0 + + - Move current window to (x0, y0). + + - .. + + - ``OSD_OpenRaw`` + + - | x0,y0,x1,y1, + | `osd_raw_window_t`_ {color} + + - Open other types of OSD windows. + +Description +~~~~~~~~~~~ + +The ``OSD_Command`` data type is used with the `OSD_SEND_CMD`_ ioctl to +tell the driver which OSD_Command to execute. + + +----- + +osd_cmd_t +--------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + typedef struct osd_cmd_s { + OSD_Command cmd; + int x0; + int y0; + int x1; + int y1; + int color; + void __user *data; + } osd_cmd_t; + +Variables +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``OSD_Command cmd`` + + - `OSD_Command`_ to be executed. + + - .. + + - ``int x0`` + + - First horizontal position. + + - .. + + - ``int y0`` + + - First vertical position. + + - .. + + - ``int x1`` + + - Second horizontal position. + + - .. + + - ``int y1`` + + - Second vertical position. + + - .. + + - ``int color`` + + - Number of the color in the palette. + + - .. + + - ``void __user *data`` + + - Command specific Data. + +Description +~~~~~~~~~~~ + +The ``osd_cmd_t`` data type is used with the `OSD_SEND_CMD`_ ioctl. +It contains the data for the OSD_Command and the `OSD_Command`_ itself. +The structure has to be passed to the driver and the components may be +modified by it. + + +----- + + +osd_raw_window_t +---------------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + typedef enum { + OSD_BITMAP1, + OSD_BITMAP2, + OSD_BITMAP4, + OSD_BITMAP8, + OSD_BITMAP1HR, + OSD_BITMAP2HR, + OSD_BITMAP4HR, + OSD_BITMAP8HR, + OSD_YCRCB422, + OSD_YCRCB444, + OSD_YCRCB444HR, + OSD_VIDEOTSIZE, + OSD_VIDEOHSIZE, + OSD_VIDEOQSIZE, + OSD_VIDEODSIZE, + OSD_VIDEOTHSIZE, + OSD_VIDEOTQSIZE, + OSD_VIDEOTDSIZE, + OSD_VIDEONSIZE, + OSD_CURSOR + } osd_raw_window_t; + +Constants +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``OSD_BITMAP1`` + + - :cspan:`1` 1 bit bitmap + + - .. + + - ``OSD_BITMAP2`` + + - 2 bit bitmap + + - .. + + - ``OSD_BITMAP4`` + + - 4 bit bitmap + + - .. + + - ``OSD_BITMAP8`` + + - 8 bit bitmap + + - .. + + - ``OSD_BITMAP1HR`` + + - 1 Bit bitmap half resolution + + - .. + + - ``OSD_BITMAP2HR`` + + - 2 Bit bitmap half resolution + + - .. + + - ``OSD_BITMAP4HR`` + + - 4 Bit bitmap half resolution + + - .. + + - ``OSD_BITMAP8HR`` + + - 8 Bit bitmap half resolution + + - .. + + - ``OSD_YCRCB422`` + + - 4:2:2 YCRCB Graphic Display + + - .. + + - ``OSD_YCRCB444`` + + - 4:4:4 YCRCB Graphic Display + + - .. + + - ``OSD_YCRCB444HR`` + + - 4:4:4 YCRCB graphic half resolution + + - .. + + - ``OSD_VIDEOTSIZE`` + + - True Size Normal MPEG Video Display + + - .. + + - ``OSD_VIDEOHSIZE`` + + - MPEG Video Display Half Resolution + + - .. + + - ``OSD_VIDEOQSIZE`` + + - MPEG Video Display Quarter Resolution + + - .. + + - ``OSD_VIDEODSIZE`` + + - MPEG Video Display Double Resolution + + - .. + + - ``OSD_VIDEOTHSIZE`` + + - True Size MPEG Video Display Half Resolution + + - .. + + - ``OSD_VIDEOTQSIZE`` + + - True Size MPEG Video Display Quarter Resolution + + - .. + + - ``OSD_VIDEOTDSIZE`` + + - True Size MPEG Video Display Double Resolution + + - .. + + - ``OSD_VIDEONSIZE`` + + - Full Size MPEG Video Display + + - .. + + - ``OSD_CURSOR`` + + - Cursor + +Description +~~~~~~~~~~~ + +The ``osd_raw_window_t`` data type is used with the `OSD_Command`_ +OSD_OpenRaw to tell the driver which type of OSD to open. + + +----- + + +osd_cap_t +--------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + typedef struct osd_cap_s { + int cmd; + #define OSD_CAP_MEMSIZE 1 + long val; + } osd_cap_t; + +Variables +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int cmd`` + + - Capability to query. + + - .. + + - ``long val`` + + - Used to store the Data. + +Supported capabilities +~~~~~~~~~~~~~~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``OSD_CAP_MEMSIZE`` + + - Memory size installed on the card. + +Description +~~~~~~~~~~~ + +This structure of data used with the `OSD_GET_CAPABILITY`_ call. + + +----- + + +OSD Function Calls +================== + +OSD_SEND_CMD +------------ + +Synopsis +~~~~~~~~ + +.. c:macro:: OSD_SEND_CMD + +.. code-block:: c + + int ioctl(int fd, int request = OSD_SEND_CMD, enum osd_cmd_t *cmd) + + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Pointer to the location of the structure `osd_cmd_t`_ for this + command. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl sends the `OSD_Command`_ to the card. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``EINVAL`` + + - Command is out of range. + + +----- + + +OSD_GET_CAPABILITY +------------------ + +Synopsis +~~~~~~~~ + +.. c:macro:: OSD_GET_CAPABILITY + +.. code-block:: c + + int ioctl(int fd, int request = OSD_GET_CAPABILITY, + struct osd_cap_t *cap) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``OSD_GET_CAPABILITY`` for this command. + + - .. + + - ``unsigned int *cap`` + + - Pointer to the location of the structure `osd_cap_t`_ for this + command. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl is used to get the capabilities of the OSD of the AV7110 based +DVB-decoder-card in use. + +.. note:: + The structure osd_cap_t has to be setup by the user and passed to the + driver. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. + + - ``EINVAL`` + + - Unsupported capability. + + +----- + + +open() +------ + +Synopsis +~~~~~~~~ + +.. code-block:: c + + #include <fcntl.h> + +.. c:function:: int open(const char *deviceName, int flags) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``const char *deviceName`` + + - Name of specific OSD device. + + - .. + + - :rspan:`3` ``int flags`` + + - :cspan:`1` A bit-wise OR of the following flags: + + - .. + + - ``O_RDONLY`` + + - read-only access + + - .. + + - ``O_RDWR`` + + - read/write access + + - .. + + - ``O_NONBLOCK`` + - | Open in non-blocking mode + | (blocking mode is the default) + +Description +~~~~~~~~~~~ + +This system call opens a named OSD device (e.g. +``/dev/dvb/adapter?/osd0``) for subsequent use. + +Return Value +~~~~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``ENODEV`` + + - Device driver not loaded/available. + + - .. + + - ``EINTERNAL`` + + - Internal error. + + - .. + + - ``EBUSY`` + + - Device or resource busy. + + - .. + + - ``EINVAL`` + + - Invalid argument. + + +----- + + +close() +------- + +Synopsis +~~~~~~~~ + +.. c:function:: int close(int fd) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_ . + +Description +~~~~~~~~~~~ + +This system call closes a previously opened OSD device. + +Return Value +~~~~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``EBADF`` + + - fd is not a valid open file descriptor. diff --git a/Documentation/userspace-api/media/dvb/legacy_dvb_video.rst b/Documentation/userspace-api/media/dvb/legacy_dvb_video.rst new file mode 100644 index 00000000000000..b9fd5cadae243d --- /dev/null +++ b/Documentation/userspace-api/media/dvb/legacy_dvb_video.rst @@ -0,0 +1,2430 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later OR GPL-2.0 + +.. c:namespace:: dtv.legacy.video + +.. _dvb_video: + +================ +DVB Video Device +================ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +The DVB video device controls the MPEG2 video decoder of the DVB +hardware. It can be accessed through ``/dev/dvb/adapter0/video0``. Data +types and ioctl definitions can be accessed by including +``linux/dvb/video.h`` in your application. + +Note that the DVB video device only controls decoding of the MPEG video +stream, not its presentation on the TV or computer screen. On PCs this +is typically handled by an associated video4linux device, e.g. +``/dev/video``, which allows scaling and defining output windows. + +Most DVB cards don’t have their own MPEG decoder, which results in the +omission of the audio and video device as well as the video4linux +device. + +These ioctls were also used by V4L2 to control MPEG decoders implemented +in V4L2. The use of these ioctls for that purpose has been made obsolete +and proper V4L2 ioctls or controls have been created to replace that +functionality. Use :ref:`V4L2 ioctls<video>` for new drivers! + + +Video Data Types +================ + + + +video_format_t +-------------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + typedef enum { + VIDEO_FORMAT_4_3, + VIDEO_FORMAT_16_9, + VIDEO_FORMAT_221_1 + } video_format_t; + +Constants +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``VIDEO_FORMAT_4_3`` + + - Select 4:3 format. + + - .. + + - ``VIDEO_FORMAT_16_9`` + + - Select 16:9 format. + + - .. + + - ``VIDEO_FORMAT_221_1`` + + - Select 2.21:1 format. + +Description +~~~~~~~~~~~ + +The ``video_format_t`` data type +is used in the `VIDEO_SET_FORMAT`_ function to tell the driver which +aspect ratio the output hardware (e.g. TV) has. It is also used in the +data structures `video_status`_ returned by `VIDEO_GET_STATUS`_ +and `video_event`_ returned by `VIDEO_GET_EVENT`_ which report +about the display format of the current video stream. + + +----- + + +video_displayformat_t +--------------------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + typedef enum { + VIDEO_PAN_SCAN, + VIDEO_LETTER_BOX, + VIDEO_CENTER_CUT_OUT + } video_displayformat_t; + +Constants +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``VIDEO_PAN_SCAN`` + + - Use pan and scan format. + + - .. + + - ``VIDEO_LETTER_BOX`` + + - Use letterbox format. + + - .. + + - ``VIDEO_CENTER_CUT_OUT`` + + - Use center cut out format. + +Description +~~~~~~~~~~~ + +In case the display format of the video stream and of the display +hardware differ the application has to specify how to handle the +cropping of the picture. This can be done using the +`VIDEO_SET_DISPLAY_FORMAT`_ call which accepts this enum as argument. + + +----- + + +video_size_t +------------ + +Synopsis +~~~~~~~~ + +.. code-block:: c + + typedef struct { + int w; + int h; + video_format_t aspect_ratio; + } video_size_t; + +Variables +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int w`` + + - Video width in pixels. + + - .. + + - ``int h`` + + - Video height in pixels. + + - .. + + - `video_format_t`_ ``aspect_ratio`` + + - Aspect ratio. + +Description +~~~~~~~~~~~ + +Used in the struct `video_event`_. It stores the resolution and +aspect ratio of the video. + + +----- + + +video_stream_source_t +--------------------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + typedef enum { + VIDEO_SOURCE_DEMUX, + VIDEO_SOURCE_MEMORY + } video_stream_source_t; + +Constants +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``VIDEO_SOURCE_DEMUX`` + + - :cspan:`1` Select the demux as the main source. + + - .. + + - ``VIDEO_SOURCE_MEMORY`` + + - If this source is selected, the stream + comes from the user through the write + system call. + +Description +~~~~~~~~~~~ + +The video stream source is set through the `VIDEO_SELECT_SOURCE`_ call +and can take the following values, depending on whether we are replaying +from an internal (demuxer) or external (user write) source. +VIDEO_SOURCE_DEMUX selects the demultiplexer (fed either by the +frontend or the DVR device) as the source of the video stream. If +VIDEO_SOURCE_MEMORY is selected the stream comes from the application +through the `write()`_ system call. + + +----- + + +video_play_state_t +------------------ + +Synopsis +~~~~~~~~ + +.. code-block:: c + + typedef enum { + VIDEO_STOPPED, + VIDEO_PLAYING, + VIDEO_FREEZED + } video_play_state_t; + +Constants +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``VIDEO_STOPPED`` + + - Video is stopped. + + - .. + + - ``VIDEO_PLAYING`` + + - Video is currently playing. + + - .. + + - ``VIDEO_FREEZED`` + + - Video is frozen. + +Description +~~~~~~~~~~~ + +This values can be returned by the `VIDEO_GET_STATUS`_ call +representing the state of video playback. + + +----- + + +struct video_command +-------------------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + struct video_command { + __u32 cmd; + __u32 flags; + union { + struct { + __u64 pts; + } stop; + + struct { + __s32 speed; + __u32 format; + } play; + + struct { + __u32 data[16]; + } raw; + }; + }; + + +Variables +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``__u32 cmd`` + + - `Decoder command`_ + + - .. + + - ``__u32 flags`` + + - Flags for the `Decoder command`_. + + - .. + + - ``struct stop`` + + - ``__u64 pts`` + + - MPEG PTS + + - .. + + - :rspan:`5` ``stuct play`` + + - :rspan:`4` ``__s32 speed`` + + - 0 or 1000 specifies normal speed, + + - .. + + - 1: specifies forward single stepping, + + - .. + + - -1: specifies backward single stepping, + + - .. + + - >1: playback at speed / 1000 of the normal speed + + - .. + + - <-1: reverse playback at ( -speed / 1000 ) of the normal speed. + + - .. + + - ``__u32 format`` + + - `Play input formats`_ + + - .. + + - ``__u32 data[16]`` + + - Reserved + +Description +~~~~~~~~~~~ + +The structure must be zeroed before use by the application. This ensures +it can be extended safely in the future. + + +----- + + +Predefined decoder commands and flags +------------------------------------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + #define VIDEO_CMD_PLAY (0) + #define VIDEO_CMD_STOP (1) + #define VIDEO_CMD_FREEZE (2) + #define VIDEO_CMD_CONTINUE (3) + + #define VIDEO_CMD_FREEZE_TO_BLACK (1 << 0) + + #define VIDEO_CMD_STOP_TO_BLACK (1 << 0) + #define VIDEO_CMD_STOP_IMMEDIATELY (1 << 1) + + #define VIDEO_PLAY_FMT_NONE (0) + #define VIDEO_PLAY_FMT_GOP (1) + + #define VIDEO_VSYNC_FIELD_UNKNOWN (0) + #define VIDEO_VSYNC_FIELD_ODD (1) + #define VIDEO_VSYNC_FIELD_EVEN (2) + #define VIDEO_VSYNC_FIELD_PROGRESSIVE (3) + +Constants +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - :rspan:`3` _`Decoder command` + + - ``VIDEO_CMD_PLAY`` + + - Start playback. + + - .. + + - ``VIDEO_CMD_STOP`` + + - Stop playback. + + - .. + + - ``VIDEO_CMD_FREEZE`` + + - Freeze playback. + + - .. + + - ``VIDEO_CMD_CONTINUE`` + + - Continue playback after freeze. + + - .. + + - Flags for ``VIDEO_CMD_FREEZE`` + + - ``VIDEO_CMD_FREEZE_TO_BLACK`` + + - Show black picture on freeze. + + - .. + + - :rspan:`1` Flags for ``VIDEO_CMD_STOP`` + + - ``VIDEO_CMD_STOP_TO_BLACK`` + + - Show black picture on stop. + + - .. + + - ``VIDEO_CMD_STOP_IMMEDIATELY`` + + - Stop immediately, without emptying buffers. + + - .. + + - :rspan:`1` _`Play input formats` + + - ``VIDEO_PLAY_FMT_NONE`` + + - The decoder has no special format requirements + + - .. + + - ``VIDEO_PLAY_FMT_GOP`` + + - The decoder requires full GOPs + + - .. + + - :rspan:`3` Field order + + - ``VIDEO_VSYNC_FIELD_UNKNOWN`` + + - FIELD_UNKNOWN can be used if the hardware does not know + whether the Vsync is for an odd, even or progressive + (i.e. non-interlaced) field. + + - .. + + - ``VIDEO_VSYNC_FIELD_ODD`` + + - Vsync is for an odd field. + + - .. + + - ``VIDEO_VSYNC_FIELD_EVEN`` + + - Vsync is for an even field. + + - .. + + - ``VIDEO_VSYNC_FIELD_PROGRESSIVE`` + + - progressive (i.e. non-interlaced) + + +----- + + +video_event +----------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + struct video_event { + __s32 type; + #define VIDEO_EVENT_SIZE_CHANGED 1 + #define VIDEO_EVENT_FRAME_RATE_CHANGED 2 + #define VIDEO_EVENT_DECODER_STOPPED 3 + #define VIDEO_EVENT_VSYNC 4 + long timestamp; + union { + video_size_t size; + unsigned int frame_rate; + unsigned char vsync_field; + } u; + }; + +Variables +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - :rspan:`4` ``__s32 type`` + + - :cspan:`1` Event type. + + - .. + + - ``VIDEO_EVENT_SIZE_CHANGED`` + + - Size changed. + + - .. + + - ``VIDEO_EVENT_FRAME_RATE_CHANGED`` + + - Framerate changed. + + - .. + + - ``VIDEO_EVENT_DECODER_STOPPED`` + + - Decoder stopped. + + - .. + + - ``VIDEO_EVENT_VSYNC`` + + - Vsync occurred. + + - .. + + - ``long timestamp`` + + - :cspan:`1` MPEG PTS at occurrence. + + - .. + + - :rspan:`2` ``union u`` + + - `video_size_t`_ size + + - Resolution and aspect ratio of the video. + + - .. + + - ``unsigned int frame_rate`` + + - in frames per 1000sec + + - .. + + - ``unsigned char vsync_field`` + + - | unknown / odd / even / progressive + | See: `Predefined decoder commands and flags`_ + +Description +~~~~~~~~~~~ + +This is the structure of a video event as it is returned by the +`VIDEO_GET_EVENT`_ call. See there for more details. + + +----- + + +video_status +------------ + +Synopsis +~~~~~~~~ + +The `VIDEO_GET_STATUS`_ call returns the following structure informing +about various states of the playback operation. + +.. code-block:: c + + struct video_status { + int video_blank; + video_play_state_t play_state; + video_stream_source_t stream_source; + video_format_t video_format; + video_displayformat_t display_format; + }; + +Variables +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - :rspan:`2` ``int video_blank`` + + - :cspan:`1` Show blank video on freeze? + + - .. + + - TRUE ( != 0 ) + + - Blank screen when freeze. + + - .. + + - FALSE ( == 0 ) + + - Show last decoded frame. + + - .. + + - `video_play_state_t`_ ``play_state`` + + - Current state of playback. + + - .. + + - `video_stream_source_t`_ ``stream_source`` + + - Current source (demux/memory). + + - .. + + - `video_format_t`_ ``video_format`` + + - Current aspect ratio of stream. + + - .. + + - `video_displayformat_t`_ ``display_format`` + + - Applied cropping mode. + +Description +~~~~~~~~~~~ + +If ``video_blank`` is set ``TRUE`` video will be blanked out if the +channel is changed or if playback is stopped. Otherwise, the last picture +will be displayed. ``play_state`` indicates if the video is currently +frozen, stopped, or being played back. The ``stream_source`` corresponds +to the selected source for the video stream. It can come either from the +demultiplexer or from memory. The ``video_format`` indicates the aspect +ratio (one of 4:3 or 16:9) of the currently played video stream. +Finally, ``display_format`` corresponds to the applied cropping mode in +case the source video format is not the same as the format of the output +device. + + +----- + + +video_still_picture +------------------- + +Synopsis +~~~~~~~~ + +.. code-block:: c + + struct video_still_picture { + char *iFrame; + int32_t size; + }; + +Variables +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``char *iFrame`` + + - Pointer to a single iframe in memory. + + - .. + + - ``int32_t size`` + + - Size of the iframe. + + +Description +~~~~~~~~~~~ + +An I-frame displayed via the `VIDEO_STILLPICTURE`_ call is passed on +within this structure. + + +----- + + +video capabilities +------------------ + +Synopsis +~~~~~~~~ + +.. code-block:: c + + #define VIDEO_CAP_MPEG1 1 + #define VIDEO_CAP_MPEG2 2 + #define VIDEO_CAP_SYS 4 + #define VIDEO_CAP_PROG 8 + +Constants +~~~~~~~~~ +Bit definitions for capabilities: + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``VIDEO_CAP_MPEG1`` + + - :cspan:`1` The hardware can decode MPEG1. + + - .. + + - ``VIDEO_CAP_MPEG2`` + + - The hardware can decode MPEG2. + + - .. + + - ``VIDEO_CAP_SYS`` + + - The video device accepts system stream. + + You still have to open the video and the audio device + but only send the stream to the video device. + + - .. + + - ``VIDEO_CAP_PROG`` + + - The video device accepts program stream. + + You still have to open the video and the audio device + but only send the stream to the video device. + +Description +~~~~~~~~~~~ + +A call to `VIDEO_GET_CAPABILITIES`_ returns an unsigned integer with the +following bits set according to the hardware's capabilities. + + +----- + + +Video Function Calls +==================== + + +VIDEO_STOP +---------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_STOP + +.. code-block:: c + + int ioctl(fd, VIDEO_STOP, int mode) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - :cspan:`1` Equals ``VIDEO_STOP`` for this command. + + - .. + + - :rspan:`2` ``int mode`` + + - :cspan:`1` Indicates how the screen shall be handled. + + - .. + + - TRUE ( != 0 ) + + - Blank screen when stop. + + - .. + + - FALSE ( == 0 ) + + - Show last decoded frame. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl is for Digital TV devices only. To control a V4L2 decoder use +the V4L2 :ref:`VIDIOC_DECODER_CMD` instead. + +This ioctl call asks the Video Device to stop playing the current +stream. Depending on the input parameter, the screen can be blanked out +or displaying the last decoded frame. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_PLAY +---------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_PLAY + +.. code-block:: c + + int ioctl(fd, VIDEO_PLAY) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_PLAY`` for this command. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl is for Digital TV devices only. To control a V4L2 decoder use +the V4L2 :ref:`VIDIOC_DECODER_CMD` instead. + +This ioctl call asks the Video Device to start playing a video stream +from the selected source. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_FREEZE +------------ + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_FREEZE + +.. code-block:: c + + int ioctl(fd, VIDEO_FREEZE) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_FREEZE`` for this command. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl is for Digital TV devices only. To control a V4L2 decoder use +the V4L2 :ref:`VIDIOC_DECODER_CMD` instead. + +This ioctl call suspends the live video stream being played, if +VIDEO_SOURCE_DEMUX is selected. Decoding and playing are frozen. +It is then possible to restart the decoding and playing process of the +video stream using the `VIDEO_CONTINUE`_ command. +If VIDEO_SOURCE_MEMORY is selected in the ioctl call +`VIDEO_SELECT_SOURCE`_, the Digital TV subsystem will not decode any more +data until the ioctl call `VIDEO_CONTINUE`_ or `VIDEO_PLAY`_ is performed. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_CONTINUE +-------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_CONTINUE + +.. code-block:: c + + int ioctl(fd, VIDEO_CONTINUE) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_CONTINUE`` for this command. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl is for Digital TV devices only. To control a V4L2 decoder use +the V4L2 :ref:`VIDIOC_DECODER_CMD` instead. + +This ioctl call restarts decoding and playing processes of the video +stream which was played before a call to `VIDEO_FREEZE`_ was made. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_SELECT_SOURCE +------------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_SELECT_SOURCE + +.. code-block:: c + + int ioctl(fd, VIDEO_SELECT_SOURCE, video_stream_source_t source) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_SELECT_SOURCE`` for this command. + + - .. + + - `video_stream_source_t`_ ``source`` + + - Indicates which source shall be used for the Video stream. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl is for Digital TV devices only. This ioctl was also supported +by the V4L2 ivtv driver, but that has been replaced by the ivtv-specific +``IVTV_IOC_PASSTHROUGH_MODE`` ioctl. + +This ioctl call informs the video device which source shall be used for +the input data. The possible sources are demux or memory. If memory is +selected, the data is fed to the video device through the write command +using the struct `video_stream_source_t`_. If demux is selected, the data +is directly transferred from the onboard demux-device to the decoder. + +The data fed to the decoder is also controlled by the PID-filter. +Output selection: :c:type:`dmx_output` ``DMX_OUT_DECODER``. + + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_SET_BLANK +--------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_SET_BLANK + +.. code-block:: c + + int ioctl(fd, VIDEO_SET_BLANK, int mode) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - :cspan:`1` Equals ``VIDEO_SET_BLANK`` for this command. + + - .. + + - :rspan:`2` ``int mode`` + + - :cspan:`1` Indicates if the screen shall be blanked. + + - .. + + - TRUE ( != 0 ) + + - Blank screen when stop. + + - .. + + - FALSE ( == 0 ) + + - Show last decoded frame. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the Video Device to blank out the picture. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_GET_STATUS +---------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_GET_STATUS + +.. code-block:: c + + int ioctl(fd, int request = VIDEO_GET_STATUS, + struct video_status *status) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_GET_STATUS`` for this command. + + - .. + + - ``struct`` `video_status`_ ``*status`` + + - Returns the current status of the Video Device. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the Video Device to return the current status of +the device. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_GET_EVENT +--------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_GET_EVENT + +.. code-block:: c + + int ioctl(fd, int request = VIDEO_GET_EVENT, + struct video_event *ev) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_GET_EVENT`` for this command. + + - .. + + - ``struct`` `video_event`_ ``*ev`` + + - Points to the location where the event, if any, is to be stored. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl is for DVB devices only. To get events from a V4L2 decoder +use the V4L2 :ref:`VIDIOC_DQEVENT` ioctl instead. + +This ioctl call returns an event of type `video_event`_ if available. A +certain number of the latest events will be cued and returned in order of +occurrence. Older events may be discarded if not fetched in time. If +an event is not available, the behavior depends on whether the device is +in blocking or non-blocking mode. In the latter case, the call fails +immediately with errno set to ``EWOULDBLOCK``. In the former case, the +call blocks until an event becomes available. The standard Linux poll() +and/or select() system calls can be used with the device file descriptor +to watch for new events. For select(), the file descriptor should be +included in the exceptfds argument, and for poll(), POLLPRI should be +specified as the wake-up condition. Read-only permissions are sufficient +for this ioctl call. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``EWOULDBLOCK`` + + - :cspan:`1` There is no event pending, and the device is in + non-blocking mode. + + - .. + + - ``EOVERFLOW`` + + - Overflow in event queue - one or more events were lost. + + +----- + + +VIDEO_SET_DISPLAY_FORMAT +------------------------ + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_SET_DISPLAY_FORMAT + +.. code-block:: c + + int ioctl(fd, int request = VIDEO_SET_DISPLAY_FORMAT, + video_display_format_t format) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_SET_DISPLAY_FORMAT`` for this command. + + - .. + + - `video_displayformat_t`_ ``format`` + + - Selects the video format to be used. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the Video Device to select the video format to be +applied by the MPEG chip on the video. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_STILLPICTURE +------------------ + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_STILLPICTURE + +.. code-block:: c + + int ioctl(fd, int request = VIDEO_STILLPICTURE, + struct video_still_picture *sp) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_STILLPICTURE`` for this command. + + - .. + + - ``struct`` `video_still_picture`_ ``*sp`` + + - Pointer to the location where the struct with the I-frame + and size is stored. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the Video Device to display a still picture +(I-frame). The input data shall be the section of an elementary video +stream containing an I-frame. Typically this section is extracted from a +TS or PES recording. Resolution and codec (see `video capabilities`_) must +be supported by the device. If the pointer is NULL, then the current +displayed still picture is blanked. + +e.g. The AV7110 supports MPEG1 and MPEG2 with the common PAL-SD +resolutions. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_FAST_FORWARD +------------------ + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_FAST_FORWARD + +.. code-block:: c + + int ioctl(fd, int request = VIDEO_FAST_FORWARD, int nFrames) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_FAST_FORWARD`` for this command. + + - .. + + - ``int nFrames`` + + - The number of frames to skip. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the Video Device to skip decoding of N number of +I-frames. This call can only be used if ``VIDEO_SOURCE_MEMORY`` is +selected. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``EPERM`` + + - Mode ``VIDEO_SOURCE_MEMORY`` not selected. + + +----- + + +VIDEO_SLOWMOTION +---------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_SLOWMOTION + +.. code-block:: c + + int ioctl(fd, int request = VIDEO_SLOWMOTION, int nFrames) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_SLOWMOTION`` for this command. + + - .. + + - ``int nFrames`` + + - The number of times to repeat each frame. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the video device to repeat decoding frames N number +of times. This call can only be used if ``VIDEO_SOURCE_MEMORY`` is +selected. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``EPERM`` + + - Mode ``VIDEO_SOURCE_MEMORY`` not selected. + + +----- + + +VIDEO_GET_CAPABILITIES +---------------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_GET_CAPABILITIES + +.. code-block:: c + + int ioctl(fd, int request = VIDEO_GET_CAPABILITIES, unsigned int *cap) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_GET_CAPABILITIES`` for this command. + + - .. + + - ``unsigned int *cap`` + + - Pointer to a location where to store the capability information. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call asks the video device about its decoding capabilities. +On success it returns an integer which has bits set according to the +defines in `video capabilities`_. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_CLEAR_BUFFER +------------------ + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_CLEAR_BUFFER + +.. code-block:: c + + int ioctl(fd, int request = VIDEO_CLEAR_BUFFER) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_CLEAR_BUFFER`` for this command. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl call clears all video buffers in the driver and in the +decoder hardware. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_SET_STREAMTYPE +-------------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_SET_STREAMTYPE + +.. code-block:: c + + int ioctl(fd, int request = VIDEO_SET_STREAMTYPE, int type) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_SET_STREAMTYPE`` for this command. + + - .. + + - ``int type`` + + - Stream type. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl tells the driver which kind of stream to expect being written +to it. +Intelligent decoder might also not support or ignore (like the AV7110) +this call and determine the stream type themselves. + +Currently used stream types: + +.. flat-table:: + :header-rows: 1 + :stub-columns: 0 + + - .. + + - Codec + + - Stream type + + - .. + + - MPEG2 + + - 0 + + - .. + + - MPEG4 h.264 + + - 1 + + - .. + + - VC1 + + - 3 + + - .. + + - MPEG4 Part2 + + - 4 + + - .. + + - VC1 SM + + - 5 + + - .. + + - MPEG1 + + - 6 + + - .. + + - HEVC h.265 + + - | 7 + | DREAMBOX: 22 + + - .. + + - AVS + + - 16 + + - .. + + - AVS2 + + - 40 + +Not every decoder supports all stream types. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_SET_FORMAT +---------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_SET_FORMAT + +.. code-block:: c + + int ioctl(fd, int request = VIDEO_SET_FORMAT, video_format_t format) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_SET_FORMAT`` for this command. + + - .. + + - `video_format_t`_ ``format`` + + - Video format of TV as defined in section `video_format_t`_. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl sets the screen format (aspect ratio) of the connected output +device (TV) so that the output of the decoder can be adjusted +accordingly. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_GET_SIZE +-------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_GET_SIZE + +.. code-block:: c + + int ioctl(int fd, int request = VIDEO_GET_SIZE, video_size_t *size) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call, + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_GET_SIZE`` for this command. + + - .. + + - `video_size_t`_ ``*size`` + + - Returns the size and aspect ratio. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +This ioctl returns the size and aspect ratio. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_GET_PTS +------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_GET_PTS + +.. code-block:: c + + int ioctl(int fd, int request = VIDEO_GET_PTS, __u64 *pts) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_GET_PTS`` for this command. + + - .. + + - ``__u64 *pts`` + + - Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / + ISO/IEC 13818-1. + + The PTS should belong to the currently played frame if possible, + but may also be a value close to it like the PTS of the last + decoded frame or the last PTS extracted by the PES parser. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +For V4L2 decoders this ioctl has been replaced by the +``V4L2_CID_MPEG_VIDEO_DEC_PTS`` control. + +This ioctl call asks the Video Device to return the current PTS +timestamp. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_GET_FRAME_COUNT +--------------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_GET_FRAME_COUNT + +.. code-block:: c + + int ioctl(int fd, VIDEO_GET_FRAME_COUNT, __u64 *pts) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_GET_FRAME_COUNT`` for this command. + + - .. + + - ``__u64 *pts`` + + - Returns the number of frames displayed since the decoder was + started. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +For V4L2 decoders this ioctl has been replaced by the +``V4L2_CID_MPEG_VIDEO_DEC_FRAME`` control. + +This ioctl call asks the Video Device to return the number of displayed +frames since the decoder was started. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_COMMAND +------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_COMMAND + +.. code-block:: c + + int ioctl(int fd, int request = VIDEO_COMMAND, + struct video_command *cmd) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_COMMAND`` for this command. + + - .. + + - `struct video_command`_ ``*cmd`` + + - Commands the decoder. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +For V4L2 decoders this ioctl has been replaced by the +:ref:`VIDIOC_DECODER_CMD` ioctl. + +This ioctl commands the decoder. The `struct video_command`_ is a +subset of the ``v4l2_decoder_cmd`` struct, so refer to the +:ref:`VIDIOC_DECODER_CMD` documentation for +more information. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +VIDEO_TRY_COMMAND +----------------- + +Synopsis +~~~~~~~~ + +.. c:macro:: VIDEO_TRY_COMMAND + +.. code-block:: c + + int ioctl(int fd, int request = VIDEO_TRY_COMMAND, + struct video_command *cmd) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``int request`` + + - Equals ``VIDEO_TRY_COMMAND`` for this command. + + - .. + + - `struct video_command`_ ``*cmd`` + + - Try a decoder command. + +Description +~~~~~~~~~~~ + +.. attention:: Do **not** use in new drivers! + See: :ref:`legacy_dvb_decoder_notes` + +For V4L2 decoders this ioctl has been replaced by the +:ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` ioctl. + +This ioctl tries a decoder command. The `struct video_command`_ is a +subset of the ``v4l2_decoder_cmd`` struct, so refer to the +:ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` documentation +for more information. + +Return Value +~~~~~~~~~~~~ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + +----- + + +open() +------ + +Synopsis +~~~~~~~~ + +.. code-block:: c + + #include <fcntl.h> + +.. c:function:: int open(const char *deviceName, int flags) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``const char *deviceName`` + + - Name of specific video device. + + - .. + + - :rspan:`3` ``int flags`` + + - :cspan:`1` A bit-wise OR of the following flags: + + - .. + + - ``O_RDONLY`` + + - read-only access + + - .. + + - ``O_RDWR`` + + - read/write access + + - .. + + - ``O_NONBLOCK`` + - | Open in non-blocking mode + | (blocking mode is the default) + +Description +~~~~~~~~~~~ + +This system call opens a named video device (e.g. +/dev/dvb/adapter?/video?) for subsequent use. + +When an open() call has succeeded, the device will be ready for use. The +significance of blocking or non-blocking mode is described in the +documentation for functions where there is a difference. It does not +affect the semantics of the open() call itself. A device opened in +blocking mode can later be put into non-blocking mode (and vice versa) +using the F_SETFL command of the fcntl system call. This is a standard +system call, documented in the Linux manual page for fcntl. Only one +user can open the Video Device in O_RDWR mode. All other attempts to +open the device in this mode will fail, and an error-code will be +returned. If the Video Device is opened in O_RDONLY mode, the only +ioctl call that can be used is `VIDEO_GET_STATUS`_. All other call will +return an error code. + +Return Value +~~~~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``ENODEV`` + + - :cspan:`1` Device driver not loaded/available. + + - .. + + - ``EINTERNAL`` + + - Internal error. + + - .. + + - ``EBUSY`` + + - Device or resource busy. + + - .. + + - ``EINVAL`` + + - Invalid argument. + + +----- + + +close() +------- + +Synopsis +~~~~~~~~ + +.. c:function:: int close(int fd) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + +Description +~~~~~~~~~~~ + +This system call closes a previously opened video device. + +Return Value +~~~~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``EBADF`` + + - fd is not a valid open file descriptor. + + +----- + + +write() +------- + +Synopsis +~~~~~~~~ + +.. c:function:: size_t write(int fd, const void *buf, size_t count) + +Arguments +~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``int fd`` + + - :cspan:`1` File descriptor returned by a previous call + to `open()`_. + + - .. + + - ``void *buf`` + + - Pointer to the buffer containing the PES data. + + - .. + + - ``size_t count`` + + - Size of buf. + +Description +~~~~~~~~~~~ + +This system call can only be used if VIDEO_SOURCE_MEMORY is selected +in the ioctl call `VIDEO_SELECT_SOURCE`_. The data provided shall be in +PES format, unless the capability allows other formats. TS is the +most common format for storing DVB-data, it is usually supported too. +If O_NONBLOCK is not specified the function will block until buffer space +is available. The amount of data to be transferred is implied by count. + +.. note:: See: :ref:`DVB Data Formats <legacy_dvb_decoder_formats>` + +Return Value +~~~~~~~~~~~~ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + - .. + + - ``EPERM`` + + - :cspan:`1` Mode ``VIDEO_SOURCE_MEMORY`` not selected. + + - .. + + - ``ENOMEM`` + + - Attempted to write more data than the internal buffer can hold. + + - .. + + - ``EBADF`` + + - fd is not a valid open file descriptor. diff --git a/Documentation/userspace-api/media/mediactl/media-types.rst b/Documentation/userspace-api/media/mediactl/media-types.rst index 0ffeece1e0c8e9..6332e8395263b0 100644 --- a/Documentation/userspace-api/media/mediactl/media-types.rst +++ b/Documentation/userspace-api/media/mediactl/media-types.rst @@ -375,12 +375,11 @@ Types and flags used to represent the media graph elements are origins of links. * - ``MEDIA_PAD_FL_MUST_CONNECT`` - - If this flag is set and the pad is linked to any other pad, then - at least one of those links must be enabled for the entity to be - able to stream. There could be temporary reasons (e.g. device - configuration dependent) for the pad to need enabled links even - when this flag isn't set; the absence of the flag doesn't imply - there is none. + - If this flag is set, then for this pad to be able to stream, it must + be connected by at least one enabled link. There could be temporary + reasons (e.g. device configuration dependent) for the pad to need + enabled links even when this flag isn't set; the absence of the flag + doesn't imply there is none. One and only one of ``MEDIA_PAD_FL_SINK`` and ``MEDIA_PAD_FL_SOURCE`` diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst index 810b6a859dc8d7..da4a358ce7621c 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst @@ -61,6 +61,21 @@ been accepted. A common case for the kernel not accepting a capability is that the kernel is older than the headers the userspace uses, and thus the capability is unknown to the kernel. +.. tabularcolumns:: |p{1.5cm}|p{2.9cm}|p{12.9cm}| + +.. c:type:: v4l2_subdev_client_capability + +.. flat-table:: struct v4l2_subdev_client_capability + :header-rows: 0 + :stub-columns: 0 + :widths: 3 4 20 + + * - __u64 + - ``capabilities`` + - Sub-device client capabilities of the opened device. + +.. tabularcolumns:: |p{6.8cm}|p{2.4cm}|p{8.1cm}| + .. flat-table:: Client Capabilities :header-rows: 1 diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index 09c7e585ff5800..0b5a33ee71eea1 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -372,7 +372,7 @@ The bits in the dirty bitmap are cleared before the ioctl returns, unless KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 is enabled. For more information, see the description of the capability. -Note that the Xen shared info page, if configured, shall always be assumed +Note that the Xen shared_info page, if configured, shall always be assumed to be dirty. KVM will not explicitly mark it such. @@ -5487,8 +5487,9 @@ KVM_PV_ASYNC_CLEANUP_PERFORM __u8 long_mode; __u8 vector; __u8 runstate_update_flag; - struct { + union { __u64 gfn; + __u64 hva; } shared_info; struct { __u32 send_port; @@ -5516,19 +5517,20 @@ type values: KVM_XEN_ATTR_TYPE_LONG_MODE Sets the ABI mode of the VM to 32-bit or 64-bit (long mode). This - determines the layout of the shared info pages exposed to the VM. + determines the layout of the shared_info page exposed to the VM. KVM_XEN_ATTR_TYPE_SHARED_INFO - Sets the guest physical frame number at which the Xen "shared info" + Sets the guest physical frame number at which the Xen shared_info page resides. Note that although Xen places vcpu_info for the first 32 vCPUs in the shared_info page, KVM does not automatically do so - and instead requires that KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO be used - explicitly even when the vcpu_info for a given vCPU resides at the - "default" location in the shared_info page. This is because KVM may - not be aware of the Xen CPU id which is used as the index into the - vcpu_info[] array, so may know the correct default location. - - Note that the shared info page may be constantly written to by KVM; + and instead requires that KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO or + KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO_HVA be used explicitly even when + the vcpu_info for a given vCPU resides at the "default" location + in the shared_info page. This is because KVM may not be aware of + the Xen CPU id which is used as the index into the vcpu_info[] + array, so may know the correct default location. + + Note that the shared_info page may be constantly written to by KVM; it contains the event channel bitmap used to deliver interrupts to a Xen guest, amongst other things. It is exempt from dirty tracking mechanisms — KVM will not explicitly mark the page as dirty each @@ -5537,9 +5539,21 @@ KVM_XEN_ATTR_TYPE_SHARED_INFO any vCPU has been running or any event channel interrupts can be routed to the guest. - Setting the gfn to KVM_XEN_INVALID_GFN will disable the shared info + Setting the gfn to KVM_XEN_INVALID_GFN will disable the shared_info page. +KVM_XEN_ATTR_TYPE_SHARED_INFO_HVA + If the KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA flag is also set in the + Xen capabilities, then this attribute may be used to set the + userspace address at which the shared_info page resides, which + will always be fixed in the VMM regardless of where it is mapped + in guest physical address space. This attribute should be used in + preference to KVM_XEN_ATTR_TYPE_SHARED_INFO as it avoids + unnecessary invalidation of an internal cache when the page is + re-mapped in guest physcial address space. + + Setting the hva to zero will disable the shared_info page. + KVM_XEN_ATTR_TYPE_UPCALL_VECTOR Sets the exception vector used to deliver Xen event channel upcalls. This is the HVM-wide vector injected directly by the hypervisor @@ -5636,6 +5650,21 @@ KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO on dirty logging. Setting the gpa to KVM_XEN_INVALID_GPA will disable the vcpu_info. +KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO_HVA + If the KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA flag is also set in the + Xen capabilities, then this attribute may be used to set the + userspace address of the vcpu_info for a given vCPU. It should + only be used when the vcpu_info resides at the "default" location + in the shared_info page. In this case it is safe to assume the + userspace address will not change, because the shared_info page is + an overlay on guest memory and remains at a fixed host address + regardless of where it is mapped in guest physical address space + and hence unnecessary invalidation of an internal cache may be + avoided if the guest memory layout is modified. + If the vcpu_info does not reside at the "default" location then + it is not guaranteed to remain at the same host address and + hence the aforementioned cache invalidation is required. + KVM_XEN_VCPU_ATTR_TYPE_VCPU_TIME_INFO Sets the guest physical address of an additional pvclock structure for a given vCPU. This is typically used for guest vsyscall support. diff --git a/Documentation/w1/masters/index.rst b/Documentation/w1/masters/index.rst index 4442a98850adf3..cc40189909fd17 100644 --- a/Documentation/w1/masters/index.rst +++ b/Documentation/w1/masters/index.rst @@ -12,3 +12,4 @@ mxc-w1 omap-hdq w1-gpio + w1-uart diff --git a/Documentation/w1/masters/w1-uart.rst b/Documentation/w1/masters/w1-uart.rst new file mode 100644 index 00000000000000..8d0f122178d4d6 --- /dev/null +++ b/Documentation/w1/masters/w1-uart.rst @@ -0,0 +1,54 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +===================== +Kernel driver w1-uart +===================== + +Author: Christoph Winklhofer <cj.winklhofer@gmail.com> + + +Description +----------- + +UART 1-Wire bus driver. The driver utilizes the UART interface via the +Serial Device Bus to create the 1-Wire timing patterns as described in +the document `"Using a UART to Implement a 1-Wire Bus Master"`_. + +.. _"Using a UART to Implement a 1-Wire Bus Master": https://www.analog.com/en/technical-articles/using-a-uart-to-implement-a-1wire-bus-master.html + +In short, the UART peripheral must support full-duplex and operate in +open-drain mode. The timing patterns are generated by a specific +combination of baud-rate and transmitted byte, which corresponds to a +1-Wire read bit, write bit or reset pulse. + +For instance the timing pattern for a 1-Wire reset and presence detect uses +the baud-rate 9600, i.e. 104.2 us per bit. The transmitted byte 0xf0 over +UART (least significant bit first, start-bit low) sets the reset low time +for 1-Wire to 521 us. A present 1-Wire device changes the received byte by +pulling the line low, which is used by the driver to evaluate the result of +the 1-Wire operation. + +Similar for a 1-Wire read bit or write bit, which uses the baud-rate +115200, i.e. 8.7 us per bit. The transmitted byte 0x80 is used for a +Write-0 operation (low time 69.6us) and the byte 0xff for Read-0, Read-1 +and Write-1 (low time 8.7us). + +The default baud-rate for reset and presence detection is 9600 and for +a 1-Wire read or write operation 115200. In case the actual baud-rate +is different from the requested one, the transmitted byte is adapted +to generate the 1-Wire timing patterns. + + +Usage +----- + +Specify the UART 1-wire bus in the device tree by adding the single child +onewire to the serial node (e.g. uart0). For example: +:: + + @uart0 { + ... + onewire { + compatible = "w1-uart"; + }; + }; diff --git a/Documentation/wmi/acpi-interface.rst b/Documentation/wmi/acpi-interface.rst index d31af0ed9c0836..06fb7fcf44134a 100644 --- a/Documentation/wmi/acpi-interface.rst +++ b/Documentation/wmi/acpi-interface.rst @@ -93,4 +93,7 @@ _WED ACPI method ---------------- Used to retrieve additional WMI event data, its single parameter is a integer -holding the notification ID of the event. +holding the notification ID of the event. This method should be evaluated every +time an ACPI notification is received, since some ACPI implementations use a +queue to store WMI event data items. This queue will overflow after a couple +of WMI events are received without retrieving the associated WMI event data. |