15 files changed, 198 insertions, 25 deletions
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 90dc2de8e0afd9..158ffe9bfadee2 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -222,7 +222,7 @@
    <title>Two Main Types of Kernel Locks: Spinlocks and Semaphores</title>
 
    <para>
-     There are two main types of kernel locks.  The fundamental type
+     There are three main types of kernel locks.  The fundamental type
      is the spinlock 
      (<filename class="headerfile">include/asm/spinlock.h</filename>),
      which is a very simple single-holder lock: if you can't get the 
@@ -230,16 +230,22 @@
      very small and fast, and can be used anywhere.
    </para>
    <para>
-     The second type is a semaphore
+     The second type is a mutex
+     (<filename class="headerfile">include/linux/mutex.h</filename>): it
+     is like a spinlock, but you may block holding a mutex.
+     If you can't lock a mutex, your task will suspend itself, and be woken
+     up when the mutex is released.  This means the CPU can do something
+     else while you are waiting.  There are many cases when you simply
+     can't sleep (see <xref linkend="sleeping-things"/>), and so have to
+     use a spinlock instead.
+   </para>
+   <para>
+     The third type is a semaphore
      (<filename class="headerfile">include/asm/semaphore.h</filename>): it
      can have more than one holder at any time (the number decided at
      initialization time), although it is most commonly used as a
-     single-holder lock (a mutex).  If you can't get a semaphore,
-     your task will put itself on the queue, and be woken up when the
-     semaphore is released.  This means the CPU will do something
-     else while you are waiting, but there are many cases when you
-     simply can't sleep (see <xref linkend="sleeping-things"/>), and so
-     have to use a spinlock instead.
+     single-holder lock (a mutex).  If you can't get a semaphore, your
+     task will be suspended and later on woken up - just like for mutexes.
    </para>
    <para>
      Neither type of lock is recursive: see
diff --git a/Documentation/dvb/avermedia.txt b/Documentation/dvb/avermedia.txt
index 2dc260b2b0a4a4..068070ff13cd0a 100644
--- a/Documentation/dvb/avermedia.txt
+++ b/Documentation/dvb/avermedia.txt
@@ -150,7 +150,8 @@ Getting the card going
 
    The frontend module sp887x.o, requires an external   firmware.
    Please use  the  command "get_dvb_firmware sp887x" to download
-   it. Then copy it to /usr/lib/hotplug/firmware.
+   it. Then copy it to /usr/lib/hotplug/firmware or /lib/firmware/
+   (depending on configuration of firmware hotplug).
 
 Receiving DVB-T in Australia
 
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index be6eb4c759915f..75c28a174092f5 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -23,7 +23,7 @@ use IO::Handle;
 
 @components = ( "sp8870", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t",
 		"dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
-		"or51211", "or51132_qam", "or51132_vsb");
+		"or51211", "or51132_qam", "or51132_vsb", "bluebird");
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -34,7 +34,11 @@ for ($i=0; $i < scalar(@components); $i++) {
     if ($cid eq $components[$i]) {
 	$outfile = eval($cid);
 	die $@ if $@;
-	print STDERR "Firmware $outfile extracted successfully. Now copy it to either /lib/firmware or /usr/lib/hotplug/firmware/ (depending on your hotplug version).\n";
+	print STDERR <<EOF;
+Firmware $outfile extracted successfully.
+Now copy it to either /usr/lib/hotplug/firmware or /lib/firmware
+(depending on configuration of firmware hotplug).
+EOF
 	exit(0);
     }
 }
@@ -243,7 +247,7 @@ sub nxt2002 {
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
 
     checkstandard();
-    
+
     wgetfile($sourcefile, $url);
     unzip($sourcefile, $tmpdir);
     verify("$tmpdir/SkyNETU.sys", $hash);
@@ -308,6 +312,19 @@ sub or51132_vsb {
     $fwfile;
 }
 
+sub bluebird {
+	my $url = "http://www.linuxtv.org/download/dvb/firmware/dvb-usb-bluebird-01.fw";
+	my $outfile = "dvb-usb-bluebird-01.fw";
+	my $hash = "658397cb9eba9101af9031302671f49d";
+
+	checkstandard();
+
+	wgetfile($outfile, $url);
+	verify($outfile,$hash);
+
+	$outfile;
+}
+
 # ---------------------------------------------------------------
 # Utilities
 
diff --git a/Documentation/dvb/ttusb-dec.txt b/Documentation/dvb/ttusb-dec.txt
index 5c1e984c26a768..b2f271cd784bc5 100644
--- a/Documentation/dvb/ttusb-dec.txt
+++ b/Documentation/dvb/ttusb-dec.txt
@@ -41,4 +41,5 @@ Hotplug Firmware Loading for 2.6 kernels
 For 2.6 kernels the firmware is loaded at the point that the driver module is
 loaded.  See linux/Documentation/dvb/firmware.txt for more information.
 
-Copy the three files downloaded above into the /usr/lib/hotplug/firmware directory.
+Copy the three files downloaded above into the /usr/lib/hotplug/firmware or
+/lib/firmware directory (depending on configuration of firmware hotplug).
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index a4dcf42c2fd93f..944cf109a6f5a3 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -418,7 +418,7 @@ VmallocChunk:   111088 kB
        Dirty: Memory which is waiting to get written back to the disk
    Writeback: Memory which is actively being written back to the disk
       Mapped: files which have been mmaped, such as libraries
-              Slab: in-kernel data structures cache
+        Slab: in-kernel data structures cache
  CommitLimit: Based on the overcommit ratio ('vm.overcommit_ratio'),
               this is the total amount of  memory currently available to
               be allocated on the system. This limit is only adhered to
diff --git a/Documentation/i2o/ioctl b/Documentation/i2o/ioctl
index 3e174978997d35..1e77fac4e120b9 100644
--- a/Documentation/i2o/ioctl
+++ b/Documentation/i2o/ioctl
@@ -185,7 +185,7 @@ VII. Getting Parameters
       ENOMEM      Kernel memory allocation error
 
    A return value of 0 does not mean that the value was actually
-   properly retreived.  The user should check the result list
+   properly retrieved.  The user should check the result list
    to determine the specific status of the transaction.
 
 VIII. Downloading Software
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index acb010bb087b57..0dc848bf0b56bb 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -998,6 +998,8 @@ running once the system is up.
 
 	nowb		[ARM]
 
+	nr_uarts=	[SERIAL] maximum number of UARTs to be registered.
+
 	opl3=		[HW,OSS]
 			Format: <io>
 
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 0541fe1de70482..0ea5a0c6e8277f 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -411,7 +411,8 @@ int init_module(void)
 		printk("Couldn't find %s to plant kprobe\n", "do_fork");
 		return -1;
 	}
-	if ((ret = register_kprobe(&kp) < 0)) {
+	ret = register_kprobe(&kp);
+	if (ret < 0) {
 		printk("register_kprobe failed, returned %d\n", ret);
 		return -1;
 	}
diff --git a/Documentation/mutex-design.txt b/Documentation/mutex-design.txt
new file mode 100644
index 00000000000000..cbf79881a41c8d
--- /dev/null
+++ b/Documentation/mutex-design.txt
@@ -0,0 +1,135 @@
+Generic Mutex Subsystem
+
+started by Ingo Molnar <mingo@redhat.com>
+
+  "Why on earth do we need a new mutex subsystem, and what's wrong
+   with semaphores?"
+
+firstly, there's nothing wrong with semaphores. But if the simpler
+mutex semantics are sufficient for your code, then there are a couple
+of advantages of mutexes:
+
+ - 'struct mutex' is smaller on most architectures: .e.g on x86,
+   'struct semaphore' is 20 bytes, 'struct mutex' is 16 bytes.
+   A smaller structure size means less RAM footprint, and better
+   CPU-cache utilization.
+
+ - tighter code. On x86 i get the following .text sizes when
+   switching all mutex-alike semaphores in the kernel to the mutex
+   subsystem:
+
+        text    data     bss     dec     hex filename
+     3280380  868188  396860 4545428  455b94 vmlinux-semaphore
+     3255329  865296  396732 4517357  44eded vmlinux-mutex
+
+   that's 25051 bytes of code saved, or a 0.76% win - off the hottest
+   codepaths of the kernel. (The .data savings are 2892 bytes, or 0.33%)
+   Smaller code means better icache footprint, which is one of the
+   major optimization goals in the Linux kernel currently.
+
+ - the mutex subsystem is slightly faster and has better scalability for
+   contended workloads. On an 8-way x86 system, running a mutex-based
+   kernel and testing creat+unlink+close (of separate, per-task files)
+   in /tmp with 16 parallel tasks, the average number of ops/sec is:
+
+    Semaphores:                        Mutexes:
+
+    $ ./test-mutex V 16 10             $ ./test-mutex V 16 10
+    8 CPUs, running 16 tasks.          8 CPUs, running 16 tasks.
+    checking VFS performance.          checking VFS performance.
+    avg loops/sec:      34713          avg loops/sec:      84153
+    CPU utilization:    63%            CPU utilization:    22%
+
+   i.e. in this workload, the mutex based kernel was 2.4 times faster
+   than the semaphore based kernel, _and_ it also had 2.8 times less CPU
+   utilization. (In terms of 'ops per CPU cycle', the semaphore kernel
+   performed 551 ops/sec per 1% of CPU time used, while the mutex kernel
+   performed 3825 ops/sec per 1% of CPU time used - it was 6.9 times
+   more efficient.)
+
+   the scalability difference is visible even on a 2-way P4 HT box:
+
+    Semaphores:                        Mutexes:
+
+    $ ./test-mutex V 16 10             $ ./test-mutex V 16 10
+    4 CPUs, running 16 tasks.          8 CPUs, running 16 tasks.
+    checking VFS performance.          checking VFS performance.
+    avg loops/sec:      127659         avg loops/sec:      181082
+    CPU utilization:    100%           CPU utilization:    34%
+
+   (the straight performance advantage of mutexes is 41%, the per-cycle
+    efficiency of mutexes is 4.1 times better.)
+
+ - there are no fastpath tradeoffs, the mutex fastpath is just as tight
+   as the semaphore fastpath. On x86, the locking fastpath is 2
+   instructions:
+
+    c0377ccb <mutex_lock>:
+    c0377ccb:       f0 ff 08                lock decl (%eax)
+    c0377cce:       78 0e                   js     c0377cde <.text.lock.mutex>
+    c0377cd0:       c3                      ret
+
+   the unlocking fastpath is equally tight:
+
+    c0377cd1 <mutex_unlock>:
+    c0377cd1:       f0 ff 00                lock incl (%eax)
+    c0377cd4:       7e 0f                   jle    c0377ce5 <.text.lock.mutex+0x7>
+    c0377cd6:       c3                      ret
+
+ - 'struct mutex' semantics are well-defined and are enforced if
+   CONFIG_DEBUG_MUTEXES is turned on. Semaphores on the other hand have
+   virtually no debugging code or instrumentation. The mutex subsystem
+   checks and enforces the following rules:
+
+   * - only one task can hold the mutex at a time
+   * - only the owner can unlock the mutex
+   * - multiple unlocks are not permitted
+   * - recursive locking is not permitted
+   * - a mutex object must be initialized via the API
+   * - a mutex object must not be initialized via memset or copying
+   * - task may not exit with mutex held
+   * - memory areas where held locks reside must not be freed
+   * - held mutexes must not be reinitialized
+   * - mutexes may not be used in irq contexts
+
+   furthermore, there are also convenience features in the debugging
+   code:
+
+   * - uses symbolic names of mutexes, whenever they are printed in debug output
+   * - point-of-acquire tracking, symbolic lookup of function names
+   * - list of all locks held in the system, printout of them
+   * - owner tracking
+   * - detects self-recursing locks and prints out all relevant info
+   * - detects multi-task circular deadlocks and prints out all affected
+   *   locks and tasks (and only those tasks)
+
+Disadvantages
+-------------
+
+The stricter mutex API means you cannot use mutexes the same way you
+can use semaphores: e.g. they cannot be used from an interrupt context,
+nor can they be unlocked from a different context that which acquired
+it. [ I'm not aware of any other (e.g. performance) disadvantages from
+using mutexes at the moment, please let me know if you find any. ]
+
+Implementation of mutexes
+-------------------------
+
+'struct mutex' is the new mutex type, defined in include/linux/mutex.h
+and implemented in kernel/mutex.c. It is a counter-based mutex with a
+spinlock and a wait-list. The counter has 3 states: 1 for "unlocked",
+0 for "locked" and negative numbers (usually -1) for "locked, potential
+waiters queued".
+
+the APIs of 'struct mutex' have been streamlined:
+
+ DEFINE_MUTEX(name);
+
+ mutex_init(mutex);
+
+ void mutex_lock(struct mutex *lock);
+ int  mutex_lock_interruptible(struct mutex *lock);
+ int  mutex_trylock(struct mutex *lock);
+ void mutex_unlock(struct mutex *lock);
+ int  mutex_is_locked(struct mutex *lock);
+
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
index 851fc97bb22f26..f9d979ee95268e 100644
--- a/Documentation/networking/sk98lin.txt
+++ b/Documentation/networking/sk98lin.txt
@@ -245,7 +245,7 @@ Default:      Both
 This parameters is only relevant if auto-negotiation for this port is 
 not set to "Sense". If auto-negotiation is set to "On", all three values
 are possible. If it is set to "Off", only "Full" and "Half" are allowed.
-This parameter is usefull if your link partner does not support all
+This parameter is useful if your link partner does not support all
 possible combinations.
 
 Flow Control
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index cd0fcd89a6f0a3..08c79d4dc54036 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -212,7 +212,7 @@ A: Try running
 
 cat `cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u` > /dev/null
 
-after resume. swapoff -a; swapon -a may also be usefull.
+after resume. swapoff -a; swapon -a may also be useful.
 
 Q: What happens to devices during swsusp? They seem to be resumed
 during system suspend?
@@ -323,7 +323,7 @@ to be useless to try to suspend to disk while that app is running?
 A: No, it should work okay, as long as your app does not mlock()
 it. Just prepare big enough swap partition.
 
-Q: What information is usefull for debugging suspend-to-disk problems?
+Q: What information is useful for debugging suspend-to-disk problems?
 
 A: Well, last messages on the screen are always useful. If something
 is broken, it is usually some kernel driver, therefore trying with as
diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv
index 330246ac80f80f..74fb085e178b9d 100644
--- a/Documentation/video4linux/CARDLIST.bttv
+++ b/Documentation/video4linux/CARDLIST.bttv
@@ -141,3 +141,4 @@
 140 -> Osprey 440                                          [0070:ff07]
 141 -> Asound Skyeye PCTV
 142 -> Sabrent TV-FM (bttv version)
+143 -> Hauppauge ImpactVCB (bt878)                         [0070:13eb]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index a1017d1a85d4b8..34b6e59f296824 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -16,7 +16,7 @@
  15 -> DViCO FusionHDTV DVB-T1                             [18ac:db00]
  16 -> KWorld LTV883RF
  17 -> DViCO FusionHDTV 3 Gold-Q                           [18ac:d810]
- 18 -> Hauppauge Nova-T DVB-T                              [0070:9002]
+ 18 -> Hauppauge Nova-T DVB-T                              [0070:9002,0070:9001]
  19 -> Conexant DVB-T reference design                     [14f1:0187]
  20 -> Provideo PV259                                      [1540:2580]
  21 -> DViCO FusionHDTV DVB-T Plus                         [18ac:db10]
@@ -35,3 +35,11 @@
  34 -> ATI HDTV Wonder                                     [1002:a101]
  35 -> WinFast DTV1000-T                                   [107d:665f]
  36 -> AVerTV 303 (M126)                                   [1461:000a]
+ 37 -> Hauppauge Nova-S-Plus DVB-S                         [0070:9201,0070:9202]
+ 38 -> Hauppauge Nova-SE2 DVB-S                            [0070:9200]
+ 39 -> KWorld DVB-S 100                                    [17de:08b2]
+ 40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid                [0070:9400,0070:9402]
+ 41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)  [0070:9800,0070:9802]
+ 42 -> digitalnow DNTV Live! DVB-T Pro                     [1822:0025]
+ 43 -> KWorld/VStream XPert DVB-T with cx22702             [17de:08a1]
+ 44 -> DViCO FusionHDTV DVB-T Dual Digital                 [18ac:db50]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index efb708ec116ace..cb3a59bbeb172b 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -56,7 +56,7 @@
  55 -> LifeView FlyDVB-T DUO                    [5168:0502,5168:0306]
  56 -> Avermedia AVerTV 307                     [1461:a70a]
  57 -> Avermedia AVerTV GO 007 FM               [1461:f31f]
- 58 -> ADS Tech Instant TV (saa7135)            [1421:0350,1421:0370,1421:1370]
+ 58 -> ADS Tech Instant TV (saa7135)            [1421:0350,1421:0351,1421:0370,1421:1370]
  59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
  60 -> Typhoon DVB-T Duo Digital/Analog Cardbus [4e42:0502]
  61 -> Philips TOUGH DVB-T reference design     [1131:2004]
@@ -81,4 +81,5 @@
  80 -> ASUS Digimatrix TV                       [1043:0210]
  81 -> Philips Tiger reference design           [1131:2018]
  82 -> MSI TV@Anywhere plus                     [1462:6231]
-
+ 83 -> Terratec Cinergy 250 PCI TV              [153b:1160]
+ 84 -> LifeView FlyDVB Trio                     [5168:0319]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index 9d6544ea9f4188..0bf3d5bf9ef8c2 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -40,7 +40,7 @@ tuner=38 - Philips PAL/SECAM multi (FM1216ME MK3)
 tuner=39 - LG NTSC (newer TAPC series)
 tuner=40 - HITACHI V7-J180AT
 tuner=41 - Philips PAL_MK (FI1216 MK)
-tuner=42 - Philips 1236D ATSC/NTSC daul in
+tuner=42 - Philips 1236D ATSC/NTSC dual in
 tuner=43 - Philips NTSC MK3 (FM1236MK3 or FM1236/F)
 tuner=44 - Philips 4 in 1 (ATI TV Wonder Pro/Conexant)
 tuner=45 - Microtune 4049 FM5
@@ -50,7 +50,7 @@ tuner=48 - Tenna TNF 8831 BGFF)
 tuner=49 - Microtune 4042 FI5 ATSC/NTSC dual in
 tuner=50 - TCL 2002N
 tuner=51 - Philips PAL/SECAM_D (FM 1256 I-H3)
-tuner=52 - Thomson DDT 7610 (ATSC/NTSC)
+tuner=52 - Thomson DTT 7610 (ATSC/NTSC)
 tuner=53 - Philips FQ1286
 tuner=54 - tda8290+75
 tuner=55 - TCL 2002MB
@@ -58,7 +58,7 @@ tuner=56 - Philips PAL/SECAM multi (FQ1216AME MK4)
 tuner=57 - Philips FQ1236A MK4
 tuner=58 - Ymec TVision TVF-8531MF/8831MF/8731MF
 tuner=59 - Ymec TVision TVF-5533MF
-tuner=60 - Thomson DDT 7611 (ATSC/NTSC)
+tuner=60 - Thomson DTT 761X (ATSC/NTSC)
 tuner=61 - Tena TNF9533-D/IF/TNF9533-B/DF
 tuner=62 - Philips TEA5767HN FM Radio
 tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner