diff options
Diffstat (limited to 'Documentation')
33 files changed, 466 insertions, 129 deletions
diff --git a/Documentation/admin-guide/cifs/todo.rst b/Documentation/admin-guide/cifs/todo.rst index 2646ed2e2d3e32..9a65c670774ee8 100644 --- a/Documentation/admin-guide/cifs/todo.rst +++ b/Documentation/admin-guide/cifs/todo.rst @@ -2,7 +2,8 @@ TODO ==== -Version 2.14 December 21, 2018 +As of 6.7 kernel. See https://wiki.samba.org/index.php/LinuxCIFSKernel +for list of features added by release A Partial List of Missing Features ================================== @@ -12,22 +13,22 @@ for visible, important contributions to this module. Here is a partial list of the known problems and missing features: a) SMB3 (and SMB3.1.1) missing optional features: + multichannel performance optimizations, algorithmic channel selection, + directory leases optimizations, + support for faster packet signing (GMAC), + support for compression over the network, + T10 copy offload ie "ODX" (copy chunk, and "Duplicate Extents" ioctl + are currently the only two server side copy mechanisms supported) - - multichannel (partially integrated), integration of multichannel with RDMA - - directory leases (improved metadata caching). Currently only implemented for root dir - - T10 copy offload ie "ODX" (copy chunk, and "Duplicate Extents" ioctl - currently the only two server side copy mechanisms supported) +b) Better optimized compounding and error handling for sparse file support, + perhaps addition of new optional SMB3.1.1 fsctls to make collapse range + and insert range more atomic -b) improved sparse file support (fiemap and SEEK_HOLE are implemented - but additional features would be supportable by the protocol such - as FALLOC_FL_COLLAPSE_RANGE and FALLOC_FL_INSERT_RANGE) - -c) Directory entry caching relies on a 1 second timer, rather than - using Directory Leases, currently only the root file handle is cached longer - by leveraging Directory Leases +c) Support for SMB3.1.1 over QUIC (and perhaps other socket based protocols + like SCTP) d) quota support (needs minor kernel change since quota calls otherwise - won't make it to network filesystems or deviceless filesystems). + won't make it to network filesystems or deviceless filesystems). e) Additional use cases can be optimized to use "compounding" (e.g. open/query/close and open/setinfo/close) to reduce the number of @@ -92,23 +93,20 @@ t) split cifs and smb3 support into separate modules so legacy (and less v) Additional testing of POSIX Extensions for SMB3.1.1 -w) Add support for additional strong encryption types, and additional spnego - authentication mechanisms (see MS-SMB2). GCM-256 is now partially implemented. +w) Support for the Mac SMB3.1.1 extensions to improve interop with Apple servers + +x) Support for additional authentication options (e.g. IAKERB, peer-to-peer + Kerberos, SCRAM and others supported by existing servers) -x) Finish support for SMB3.1.1 compression +y) Improved tracing, more eBPF trace points, better scripts for performance + analysis Known Bugs ========== See https://bugzilla.samba.org - search on product "CifsVFS" for current bug list. Also check http://bugzilla.kernel.org (Product = File System, Component = CIFS) - -1) existing symbolic links (Windows reparse points) are recognized but - can not be created remotely. They are implemented for Samba and those that - support the CIFS Unix extensions, although earlier versions of Samba - overly restrict the pathnames. -2) follow_link and readdir code does not follow dfs junctions - but recognizes them +and xfstest results e.g. https://wiki.samba.org/index.php/Xfstest-results-smb3 Misc testing to do ================== diff --git a/Documentation/admin-guide/cifs/usage.rst b/Documentation/admin-guide/cifs/usage.rst index 5f936b4b601881..aa8290a29dc88b 100644 --- a/Documentation/admin-guide/cifs/usage.rst +++ b/Documentation/admin-guide/cifs/usage.rst @@ -81,7 +81,7 @@ much older and less secure than the default dialect SMB3 which includes many advanced security features such as downgrade attack detection and encrypted shares and stronger signing and authentication algorithms. There are additional mount options that may be helpful for SMB3 to get -improved POSIX behavior (NB: can use vers=3.0 to force only SMB3, never 2.1): +improved POSIX behavior (NB: can use vers=3 to force SMB3 or later, never 2.1): ``mfsymlinks`` and either ``cifsacl`` or ``modefromsid`` (usually with ``idsfromsid``) @@ -715,6 +715,7 @@ DebugData Displays information about active CIFS sessions and Stats Lists summary resource usage information as well as per share statistics. open_files List all the open file handles on all active SMB sessions. +mount_params List of all mount parameters available for the module ======================= ======================================================= Configuration pseudo-files: @@ -864,6 +865,11 @@ i.e.:: echo "value" > /sys/module/cifs/parameters/<param> +More detailed descriptions of the available module parameters and their values +can be seen by doing: + + modinfo cifs (or modinfo smb3) + ================= ========================================================== 1. enable_oplocks Enable or disable oplocks. Oplocks are enabled by default. [Y/y/1]. To disable use any of [N/n/0]. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 2e76c3476e2ab5..31b3a25680d08c 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -888,9 +888,9 @@ memory region [offset, offset + size] for that kernel image. If '@offset' is omitted, then a suitable offset is selected automatically. - [KNL, X86-64, ARM64, RISCV] Select a region under 4G first, and - fall back to reserve region above 4G when '@offset' - hasn't been specified. + [KNL, X86-64, ARM64, RISCV, LoongArch] Select a region + under 4G first, and fall back to reserve region above + 4G when '@offset' hasn't been specified. See Documentation/admin-guide/kdump/kdump.rst for further details. crashkernel=range1:size1[,range2:size2,...][@offset] @@ -901,25 +901,27 @@ Documentation/admin-guide/kdump/kdump.rst for an example. crashkernel=size[KMG],high - [KNL, X86-64, ARM64, RISCV] range could be above 4G. + [KNL, X86-64, ARM64, RISCV, LoongArch] range could be + above 4G. Allow kernel to allocate physical memory region from top, so could be above 4G if system have more than 4G ram installed. Otherwise memory region will be allocated below 4G, if available. It will be ignored if crashkernel=X is specified. crashkernel=size[KMG],low - [KNL, X86-64, ARM64, RISCV] range under 4G. When crashkernel=X,high - is passed, kernel could allocate physical memory region - above 4G, that cause second kernel crash on system - that require some amount of low memory, e.g. swiotlb - requires at least 64M+32K low memory, also enough extra - low memory is needed to make sure DMA buffers for 32-bit - devices won't run out. Kernel would try to allocate + [KNL, X86-64, ARM64, RISCV, LoongArch] range under 4G. + When crashkernel=X,high is passed, kernel could allocate + physical memory region above 4G, that cause second kernel + crash on system that require some amount of low memory, + e.g. swiotlb requires at least 64M+32K low memory, also + enough extra low memory is needed to make sure DMA buffers + for 32-bit devices won't run out. Kernel would try to allocate default size of memory below 4G automatically. The default size is platform dependent. --> x86: max(swiotlb_size_or_default() + 8MiB, 256MiB) --> arm64: 128MiB --> riscv: 128MiB + --> loongarch: 128MiB This one lets the user specify own low range under 4G for second kernel instead. 0: to disable low allocation. diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst index bfdf236e2af3d4..e8c2ce1f9df68d 100644 --- a/Documentation/arch/arm64/silicon-errata.rst +++ b/Documentation/arch/arm64/silicon-errata.rst @@ -71,6 +71,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #2658417 | ARM64_ERRATUM_2658417 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #3117295 | ARM64_ERRATUM_3117295 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A520 | #2966298 | ARM64_ERRATUM_2966298 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A53 | #826319 | ARM64_ERRATUM_826319 | @@ -235,11 +237,9 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | Rockchip | RK3588 | #3588001 | ROCKCHIP_ERRATUM_3588001 | +----------------+-----------------+-----------------+-----------------------------+ - +----------------+-----------------+-----------------+-----------------------------+ | Fujitsu | A64FX | E#010001 | FUJITSU_ERRATUM_010001 | +----------------+-----------------+-----------------+-----------------------------+ - +----------------+-----------------+-----------------+-----------------------------+ | ASR | ASR8601 | #8601001 | N/A | +----------------+-----------------+-----------------+-----------------------------+ diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml index 04d150d4d15d3c..e6afca558c2dfa 100644 --- a/Documentation/devicetree/bindings/dma/dma-controller.yaml +++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml @@ -19,19 +19,4 @@ properties: additionalProperties: true -examples: - - | - dma: dma-controller@48000000 { - compatible = "ti,omap-sdma"; - reg = <0x48000000 0x1000>; - interrupts = <0 12 0x4>, - <0 13 0x4>, - <0 14 0x4>, - <0 15 0x4>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <127>; - dma-channel-mask = <0xfffe>; - }; - ... diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml index 346fe0fa4460e3..5ad2febc581e23 100644 --- a/Documentation/devicetree/bindings/dma/dma-router.yaml +++ b/Documentation/devicetree/bindings/dma/dma-router.yaml @@ -40,15 +40,4 @@ required: additionalProperties: true -examples: - - | - sdma_xbar: dma-router@4a002b78 { - compatible = "ti,dra7-dma-crossbar"; - reg = <0x4a002b78 0xfc>; - #dma-cells = <1>; - dma-requests = <205>; - ti,dma-safe-map = <0>; - dma-masters = <&sdma>; - }; - ... diff --git a/Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml b/Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml new file mode 100644 index 00000000000000..6a1b49a49a646b --- /dev/null +++ b/Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/loongson,ls2x-apbdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson LS2X APB DMA controller + +description: + The Loongson LS2X APB DMA controller is used for transferring data + between system memory and the peripherals on the APB bus. + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +allOf: + - $ref: dma-controller.yaml# + +properties: + compatible: + oneOf: + - const: loongson,ls2k1000-apbdma + - items: + - const: loongson,ls2k0500-apbdma + - const: loongson,ls2k1000-apbdma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + '#dma-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - '#dma-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/loongson,ls2k-clk.h> + + dma-controller@1fe00c00 { + compatible = "loongson,ls2k1000-apbdma"; + reg = <0x1fe00c00 0x8>; + interrupt-parent = <&liointc1>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml index 4003dbe94940c2..877147e95ecc5d 100644 --- a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml @@ -53,6 +53,9 @@ properties: ADMA_CHn_CTRL register. const: 1 + dma-channel-mask: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml index 88d0de3d1b46b8..deb64cb9ca3eac 100644 --- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml +++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml @@ -32,6 +32,8 @@ properties: - qcom,sm8350-gpi-dma - qcom,sm8450-gpi-dma - qcom,sm8550-gpi-dma + - qcom,sm8650-gpi-dma + - qcom,x1e80100-gpi-dma - const: qcom,sm6350-gpi-dma - items: - enum: diff --git a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml index c284abc6784aec..a42b6a26a6d3f2 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml @@ -16,7 +16,7 @@ properties: compatible: items: - enum: - - renesas,r9a07g043-dmac # RZ/G2UL + - renesas,r9a07g043-dmac # RZ/G2UL and RZ/Five - renesas,r9a07g044-dmac # RZ/G2{L,LC} - renesas,r9a07g054-dmac # RZ/V2L - const: renesas,rz-dmac diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml index a1af0b90636537..3b22183a1a3792 100644 --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml @@ -29,6 +29,7 @@ properties: compatible: items: - enum: + - microchip,mpfs-pdma - sifive,fu540-c000-pdma - const: sifive,pdma0 description: diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml index 4ca300a42a99c2..27b8e163656006 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml @@ -37,11 +37,11 @@ properties: reg: minItems: 3 - maxItems: 5 + maxItems: 9 reg-names: minItems: 3 - maxItems: 5 + maxItems: 9 "#dma-cells": const: 3 @@ -141,7 +141,10 @@ allOf: ti,sci-rm-range-tchan: false reg: - maxItems: 3 + items: + - description: BCDMA Control /Status Registers region + - description: RX Channel Realtime Registers region + - description: Ring Realtime Registers region reg-names: items: @@ -161,14 +164,29 @@ allOf: properties: reg: minItems: 5 + items: + - description: BCDMA Control /Status Registers region + - description: Block Copy Channel Realtime Registers region + - description: RX Channel Realtime Registers region + - description: TX Channel Realtime Registers region + - description: Ring Realtime Registers region + - description: Ring Configuration Registers region + - description: TX Channel Configuration Registers region + - description: RX Channel Configuration Registers region + - description: Block Copy Channel Configuration Registers region reg-names: + minItems: 5 items: - const: gcfg - const: bchanrt - const: rchanrt - const: tchanrt - const: ringrt + - const: ring + - const: tchan + - const: rchan + - const: bchan required: - ti,sci-rm-range-bchan @@ -184,7 +202,11 @@ allOf: ti,sci-rm-range-bchan: false reg: - maxItems: 4 + items: + - description: BCDMA Control /Status Registers region + - description: RX Channel Realtime Registers region + - description: TX Channel Realtime Registers region + - description: Ring Realtime Registers region reg-names: items: @@ -220,8 +242,13 @@ examples: <0x0 0x4c000000 0x0 0x20000>, <0x0 0x4a820000 0x0 0x20000>, <0x0 0x4aa40000 0x0 0x20000>, - <0x0 0x4bc00000 0x0 0x100000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + <0x0 0x4bc00000 0x0 0x100000>, + <0x0 0x48600000 0x0 0x8000>, + <0x0 0x484a4000 0x0 0x2000>, + <0x0 0x484c2000 0x0 0x2000>, + <0x0 0x48420000 0x0 0x2000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "bchan"; msi-parent = <&inta_main_dmss>; #dma-cells = <3>; diff --git a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml index a69f62f854d8c3..11e064c0299466 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml @@ -45,14 +45,28 @@ properties: The second cell is the ASEL value for the channel reg: - maxItems: 4 + minItems: 4 + items: + - description: Packet DMA Control /Status Registers region + - description: RX Channel Realtime Registers region + - description: TX Channel Realtime Registers region + - description: Ring Realtime Registers region + - description: Ring Configuration Registers region + - description: TX Configuration Registers region + - description: RX Configuration Registers region + - description: RX Flow Configuration Registers region reg-names: + minItems: 4 items: - const: gcfg - const: rchanrt - const: tchanrt - const: ringrt + - const: ring + - const: tchan + - const: rchan + - const: rflow msi-parent: true @@ -136,8 +150,14 @@ examples: reg = <0x0 0x485c0000 0x0 0x100>, <0x0 0x4a800000 0x0 0x20000>, <0x0 0x4aa00000 0x0 0x40000>, - <0x0 0x4b800000 0x0 0x400000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + <0x0 0x4b800000 0x0 0x400000>, + <0x0 0x485e0000 0x0 0x20000>, + <0x0 0x484a0000 0x0 0x4000>, + <0x0 0x484c0000 0x0 0x2000>, + <0x0 0x48430000 0x0 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "rflow"; + msi-parent = <&inta_main_dmss>; #dma-cells = <2>; diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index 22f6c5e2f7f4b9..b18cf2bfdb5b14 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -69,13 +69,24 @@ properties: - ti,j721e-navss-mcu-udmap reg: - maxItems: 3 + minItems: 3 + items: + - description: UDMA-P Control /Status Registers region + - description: RX Channel Realtime Registers region + - description: TX Channel Realtime Registers region + - description: TX Configuration Registers region + - description: RX Configuration Registers region + - description: RX Flow Configuration Registers region reg-names: + minItems: 3 items: - const: gcfg - const: rchanrt - const: tchanrt + - const: tchan + - const: rchan + - const: rflow msi-parent: true @@ -158,8 +169,11 @@ examples: compatible = "ti,am654-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x100000>, + <0x0 0x30b00000 0x0 0x20000>, + <0x0 0x30c00000 0x0 0x8000>, + <0x0 0x30d00000 0x0 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "tchan", "rchan", "rflow"; #dma-cells = <1>; ti,ringacc = <&ringacc>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 00b570c8290397..60441f0c5d7211 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -11,8 +11,13 @@ maintainers: description: | This interrupt controller is found in the Loongson-3 family of chips and - Loongson-2K1000 chip, as the primary package interrupt controller which + Loongson-2K series chips, as the primary package interrupt controller which can route local I/O interrupt to interrupt lines of cores. + Be aware of the following points. + 1.The Loongson-2K0500 is a single core CPU; + 2.The Loongson-2K0500/2K1000 has 64 device interrupt sources as inputs, so we + need to define two nodes in dts{i} to describe the "0-31" and "32-61" interrupt + sources respectively. allOf: - $ref: /schemas/interrupt-controller.yaml# @@ -33,6 +38,7 @@ properties: - const: main - const: isr0 - const: isr1 + minItems: 2 interrupt-controller: true @@ -45,11 +51,9 @@ properties: interrupt-names: description: List of names for the parent interrupts. items: - - const: int0 - - const: int1 - - const: int2 - - const: int3 + pattern: int[0-3] minItems: 1 + maxItems: 4 '#interrupt-cells': const: 2 @@ -69,6 +73,7 @@ required: - compatible - reg - interrupts + - interrupt-names - interrupt-controller - '#interrupt-cells' - loongson,parent_int_map @@ -86,7 +91,8 @@ if: then: properties: reg: - minItems: 3 + minItems: 2 + maxItems: 3 required: - reg-names diff --git a/Documentation/devicetree/bindings/loongarch/cpus.yaml b/Documentation/devicetree/bindings/loongarch/cpus.yaml new file mode 100644 index 00000000000000..f175872995e117 --- /dev/null +++ b/Documentation/devicetree/bindings/loongarch/cpus.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/loongarch/cpus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LoongArch CPUs + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +description: + This document describes the list of LoongArch CPU cores that support FDT, + it describe the layout of CPUs in a system through the "cpus" node. + +allOf: + - $ref: /schemas/cpu.yaml# + +properties: + compatible: + enum: + - loongson,la264 + - loongson,la364 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls2k-clk.h> + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <0>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + + cpu@1 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <1>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/loongarch/loongson.yaml b/Documentation/devicetree/bindings/loongarch/loongson.yaml new file mode 100644 index 00000000000000..e1a4a97b7576c9 --- /dev/null +++ b/Documentation/devicetree/bindings/loongarch/loongson.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/loongarch/loongson.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson SoC-based boards + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Loongson-2K0500 processor based boards + items: + - const: loongson,ls2k0500-ref + - const: loongson,ls2k0500 + + - description: Loongson-2K1000 processor based boards + items: + - const: loongson,ls2k1000-ref + - const: loongson,ls2k1000 + + - description: Loongson-2K2000 processor based boards + items: + - const: loongson,ls2k2000-ref + - const: loongson,ls2k2000 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml index 14a262bcbf7cd2..627f8a6078c299 100644 --- a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml +++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml @@ -28,17 +28,15 @@ properties: items: - const: reboot-mode -patternProperties: - "^mode-.+": - $ref: /schemas/types.yaml#/definitions/uint32 - description: Vendor-specific mode value written to the mode register +allOf: + - $ref: reboot-mode.yaml# required: - compatible - nvmem-cells - nvmem-cell-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml index 5e460128b0d109..fc8105a7b9b268 100644 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml @@ -111,21 +111,24 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/spmi/spmi.h> - spmi_bus: spmi@c440000 { + + spmi@c440000 { reg = <0x0c440000 0x1100>; #address-cells = <2>; #size-cells = <0>; - pmk8350: pmic@0 { + + pmic@0 { reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - pmk8350_pon: pon_hlos@1300 { - reg = <0x1300>; + + pon@800 { compatible = "qcom,pm8998-pon"; + reg = <0x800>; pwrkey { compatible = "qcom,pm8941-pwrkey"; - interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; linux,code = <KEY_POWER>; diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml index 9b1ffceefe3dec..b6acff199cdece 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml @@ -29,12 +29,10 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: Offset in the register map for the mode register (in bytes) -patternProperties: - "^mode-.+": - $ref: /schemas/types.yaml#/definitions/uint32 - description: Vendor-specific mode value written to the mode register +allOf: + - $ref: reboot-mode.yaml# -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml index 45792e216981a9..799831636194f5 100644 --- a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml +++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml @@ -57,7 +57,7 @@ examples: firmware { zynqmp-firmware { - zynqmp-power { + power-management { compatible = "xlnx,zynqmp-power"; interrupts = <0 35 4>; }; @@ -70,7 +70,7 @@ examples: firmware { zynqmp-firmware { - zynqmp-power { + power-management { compatible = "xlnx,zynqmp-power"; interrupt-parent = <&gic>; interrupts = <0 35 4>; diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml index d3ebc9de8c0b49..131b7e57d22f46 100644 --- a/Documentation/devicetree/bindings/power/supply/bq24190.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml @@ -20,6 +20,7 @@ properties: - ti,bq24192 - ti,bq24192i - ti,bq24196 + - ti,bq24296 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 23646b684ea279..6ccd75cbbc59d1 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -63,8 +63,8 @@ properties: mmu-type: description: - Identifies the MMU address translation mode used on this - hart. These values originate from the RISC-V Privileged + Identifies the largest MMU address translation mode supported by + this hart. These values originate from the RISC-V Privileged Specification document, available from https://riscv.org/specifications/ $ref: /schemas/types.yaml#/definitions/string @@ -80,6 +80,11 @@ properties: description: The blocksize in bytes for the Zicbom cache operations. + riscv,cbop-block-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The blocksize in bytes for the Zicbop cache operations. + riscv,cboz-block-size: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -101,7 +106,11 @@ properties: const: 1 compatible: - const: riscv,cpu-intc + oneOf: + - items: + - const: andestech,cpu-intc + - const: riscv,cpu-intc + - const: riscv,cpu-intc interrupt-controller: true diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml index 27beedb9819879..468c646247aa5c 100644 --- a/Documentation/devicetree/bindings/riscv/extensions.yaml +++ b/Documentation/devicetree/bindings/riscv/extensions.yaml @@ -48,7 +48,7 @@ properties: insensitive, letters in the riscv,isa string must be all lowercase. $ref: /schemas/types.yaml#/definitions/string - pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$ + pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[0-9a-z])+)?(?:_[hsxz](?:[0-9a-z])+)*$ deprecated: true riscv,isa-base: @@ -477,5 +477,12 @@ properties: latency, as ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto. + - const: xandespmu + description: + The Andes Technology performance monitor extension for counter overflow + and privilege mode filtering. For more details, see Counter Related + Registers in the AX45MP datasheet. + https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index f01c0dde0cf740..d28c102c0ce7f0 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -18,7 +18,6 @@ description: | Specifications about the audio amplifier can be found at: https://www.ti.com/lit/gpn/tas2562 - https://www.ti.com/lit/gpn/tas2563 https://www.ti.com/lit/gpn/tas2564 https://www.ti.com/lit/gpn/tas2110 @@ -29,7 +28,6 @@ properties: compatible: enum: - ti,tas2562 - - ti,tas2563 - ti,tas2564 - ti,tas2110 diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml index a69e6c223308e6..97623868924951 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -5,36 +5,46 @@ $id: http://devicetree.org/schemas/sound/ti,tas2781.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Texas Instruments TAS2781 SmartAMP +title: Texas Instruments TAS2563/TAS2781 SmartAMP maintainers: - Shenghao Ding <shenghao-ding@ti.com> -description: - The TAS2781 is a mono, digital input Class-D audio amplifier - optimized for efficiently driving high peak power into small - loudspeakers. An integrated on-chip DSP supports Texas Instruments - Smart Amp speaker protection algorithm. The integrated speaker - voltage and current sense provides for real time +description: | + The TAS2563/TAS2781 is a mono, digital input Class-D audio + amplifier optimized for efficiently driving high peak power into + small loudspeakers. An integrated on-chip DSP supports Texas + Instruments Smart Amp speaker protection algorithm. The + integrated speaker voltage and current sense provides for real time monitoring of loudspeaker behavior. -allOf: - - $ref: dai-common.yaml# + Specifications about the audio amplifier can be found at: + https://www.ti.com/lit/gpn/tas2563 + https://www.ti.com/lit/gpn/tas2781 properties: compatible: - enum: - - ti,tas2781 + description: | + ti,tas2563: 6.1-W Boosted Class-D Audio Amplifier With Integrated + DSP and IV Sense, 16/20/24/32bit stereo I2S or multichannel TDM. + + ti,tas2781: 24-V Class-D Amplifier with Real Time Integrated Speaker + Protection and Audio Processing, 16/20/24/32bit stereo I2S or + multichannel TDM. + oneOf: + - items: + - enum: + - ti,tas2563 + - const: ti,tas2781 + - enum: + - ti,tas2781 reg: description: - I2C address, in multiple tas2781s case, all the i2c address + I2C address, in multiple-AMP case, all the i2c address aggregate as one Audio Device to support multiple audio slots. maxItems: 8 minItems: 1 - items: - minimum: 0x38 - maximum: 0x3f reset-gpios: maxItems: 1 @@ -49,6 +59,44 @@ required: - compatible - reg +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - ti,tas2563 + then: + properties: + reg: + description: + I2C address, in multiple-AMP case, all the i2c address + aggregate as one Audio Device to support multiple audio slots. + maxItems: 4 + minItems: 1 + items: + minimum: 0x4c + maximum: 0x4f + + - if: + properties: + compatible: + contains: + enum: + - ti,tas2781 + then: + properties: + reg: + description: + I2C address, in multiple-AMP case, all the i2c address + aggregate as one Audio Device to support multiple audio slots. + maxItems: 8 + minItems: 1 + items: + minimum: 0x38 + maximum: 0x3f + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index 4b6c20fc819434..fced6f2d8ecbb3 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -33,6 +33,7 @@ properties: - sifive,fu540-c000-clint # SiFive FU540 - starfive,jh7100-clint # StarFive JH7100 - starfive,jh7110-clint # StarFive JH7110 + - starfive,jh8100-clint # StarFive JH8100 - const: sifive,clint0 # SiFive CLINT v0 IP block - items: - enum: diff --git a/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml b/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml index fbd235650e52cc..2e92bcdeb423ab 100644 --- a/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml +++ b/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml @@ -17,7 +17,12 @@ properties: - const: thead,c900-aclint-mtimer reg: - maxItems: 1 + items: + - description: MTIMECMP Registers + + reg-names: + items: + - const: mtimecmp interrupts-extended: minItems: 1 @@ -28,6 +33,7 @@ additionalProperties: false required: - compatible - reg + - reg-names - interrupts-extended examples: @@ -39,5 +45,6 @@ examples: <&cpu3intc 7>, <&cpu4intc 7>; reg = <0xac000000 0x00010000>; + reg-names = "mtimecmp"; }; ... diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt index d96b778b87ed8e..7425d2b994a399 100644 --- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt +++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt @@ -10,6 +10,22 @@ # Rely on implicit context synchronization as a result of exception return # when returning from IPI handler, and when returning to user-space. # +# * riscv +# +# riscv uses xRET as return from interrupt and to return to user-space. +# +# Given that xRET is not core serializing, we rely on FENCE.I for providing +# core serialization: +# +# - by calling sync_core_before_usermode() on return from interrupt (cf. +# ipi_sync_core()), +# +# - via switch_mm() and sync_core_before_usermode() (respectively, for +# uthread->uthread and kthread->uthread transitions) before returning +# to user-space. +# +# The serialization in switch_mm() is activated by prepare_sync_core_cmd(). +# # * x86 # # x86-32 uses IRET as return from interrupt, which takes care of the IPI. @@ -43,7 +59,7 @@ | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | - | riscv: | TODO | + | riscv: | ok | | s390: | ok | | sh: | TODO | | sparc: | TODO | diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt index 8fd22073a847e9..d222bd3ee7495b 100644 --- a/Documentation/features/vm/TLB/arch-support.txt +++ b/Documentation/features/vm/TLB/arch-support.txt @@ -20,7 +20,7 @@ | openrisc: | .. | | parisc: | TODO | | powerpc: | TODO | - | riscv: | TODO | + | riscv: | ok | | s390: | TODO | | sh: | TODO | | sparc: | TODO | diff --git a/Documentation/rust/arch-support.rst b/Documentation/rust/arch-support.rst index b91e9ef4d0c21e..73203ba1e9011e 100644 --- a/Documentation/rust/arch-support.rst +++ b/Documentation/rust/arch-support.rst @@ -12,10 +12,11 @@ which uses ``libclang``. Below is a general summary of architectures that currently work. Level of support corresponds to ``S`` values in the ``MAINTAINERS`` file. -============ ================ ============================================== -Architecture Level of support Constraints -============ ================ ============================================== -``um`` Maintained ``x86_64`` only. -``x86`` Maintained ``x86_64`` only. -============ ================ ============================================== +============= ================ ============================================== +Architecture Level of support Constraints +============= ================ ============================================== +``loongarch`` Maintained - +``um`` Maintained ``x86_64`` only. +``x86`` Maintained ``x86_64`` only. +============= ================ ============================================== diff --git a/Documentation/scheduler/index.rst b/Documentation/scheduler/index.rst index 3170747226f6da..43bd8a145b7a9b 100644 --- a/Documentation/scheduler/index.rst +++ b/Documentation/scheduler/index.rst @@ -7,6 +7,7 @@ Scheduler completion + membarrier sched-arch sched-bwc sched-deadline diff --git a/Documentation/scheduler/membarrier.rst b/Documentation/scheduler/membarrier.rst new file mode 100644 index 00000000000000..2387804b1c6331 --- /dev/null +++ b/Documentation/scheduler/membarrier.rst @@ -0,0 +1,39 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================== +membarrier() System Call +======================== + +MEMBARRIER_CMD_{PRIVATE,GLOBAL}_EXPEDITED - Architecture requirements +===================================================================== + +Memory barriers before updating rq->curr +---------------------------------------- + +The commands MEMBARRIER_CMD_PRIVATE_EXPEDITED and MEMBARRIER_CMD_GLOBAL_EXPEDITED +require each architecture to have a full memory barrier after coming from +user-space, before updating rq->curr. This barrier is implied by the sequence +rq_lock(); smp_mb__after_spinlock() in __schedule(). The barrier matches a full +barrier in the proximity of the membarrier system call exit, cf. +membarrier_{private,global}_expedited(). + +Memory barriers after updating rq->curr +--------------------------------------- + +The commands MEMBARRIER_CMD_PRIVATE_EXPEDITED and MEMBARRIER_CMD_GLOBAL_EXPEDITED +require each architecture to have a full memory barrier after updating rq->curr, +before returning to user-space. The schemes providing this barrier on the various +architectures are as follows. + + - alpha, arc, arm, hexagon, mips rely on the full barrier implied by + spin_unlock() in finish_lock_switch(). + + - arm64 relies on the full barrier implied by switch_to(). + + - powerpc, riscv, s390, sparc, x86 rely on the full barrier implied by + switch_mm(), if mm is not NULL; they rely on the full barrier implied + by mmdrop(), otherwise. On powerpc and riscv, switch_mm() relies on + membarrier_arch_switch_mm(). + +The barrier matches a full barrier in the proximity of the membarrier system call +entry, cf. membarrier_{private,global}_expedited(). |