diff options
Diffstat (limited to 'Documentation/ABI')
43 files changed, 1114 insertions, 194 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio index b8b0fd341c179..da1345d854b4a 100644 --- a/Documentation/ABI/obsolete/sysfs-gpio +++ b/Documentation/ABI/obsolete/sysfs-gpio @@ -28,5 +28,5 @@ Description: /label ... (r/o) descriptive, not necessarily unique /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1) - This ABI is deprecated and will be removed after 2020. It is - replaced with the GPIO character device. + This ABI is obsoleted by Documentation/ABI/testing/gpio-cdev and will be + removed after 2020. diff --git a/Documentation/ABI/removed/sysfs-firmware-efi-vars b/Documentation/ABI/removed/sysfs-firmware-efi-vars new file mode 100644 index 0000000000000..8d97368b149bb --- /dev/null +++ b/Documentation/ABI/removed/sysfs-firmware-efi-vars @@ -0,0 +1,12 @@ +What: /sys/firmware/efi/vars +Date: April 2004, removed March 2023 +Description: + This directory exposed interfaces for interacting with + EFI variables. For more information on EFI variables, + see 'Variable Services' in the UEFI specification + (section 7.2 in specification version 2.3 Errata D). + + The 'efivars' sysfs interface was removed in March of 2023, + after being considered deprecated no later than September + of 2020. Its functionality has been replaced by the + 'efivarfs' filesystem. diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index 1fe9a553c37b7..831f19a32e080 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -101,6 +101,16 @@ Description: devices that support receiving integrity metadata. +What: /sys/block/<disk>/partscan +Date: May 2024 +Contact: Christoph Hellwig <hch@lst.de> +Description: + The /sys/block/<disk>/partscan files reports if partition + scanning is enabled for the disk. It returns "1" if partition + scanning is enabled, or "0" if not. The value type is a 32-bit + unsigned integer, but only "0" and "1" are valid values. + + What: /sys/block/<disk>/<partition>/alignment_offset Date: April 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> @@ -584,18 +594,6 @@ Description: the data. If no such restriction exists, this file will contain '0'. This file is writable for testing purposes. - -What: /sys/block/<disk>/queue/throttle_sample_time -Date: March 2017 -Contact: linux-block@vger.kernel.org -Description: - [RW] This is the time window that blk-throttle samples data, in - millisecond. blk-throttle makes decision based on the - samplings. Lower time means cgroups have more smooth throughput, - but higher CPU overhead. This exists only when - CONFIG_BLK_DEV_THROTTLING_LOW is enabled. - - What: /sys/block/<disk>/queue/virt_boundary_mask Date: April 2021 Contact: linux-block@vger.kernel.org diff --git a/Documentation/ABI/stable/sysfs-firmware-efi-vars b/Documentation/ABI/stable/sysfs-firmware-efi-vars deleted file mode 100644 index 46ccd233e3594..0000000000000 --- a/Documentation/ABI/stable/sysfs-firmware-efi-vars +++ /dev/null @@ -1,79 +0,0 @@ -What: /sys/firmware/efi/vars -Date: April 2004 -Contact: Matt Domsch <Matt_Domsch@dell.com> -Description: - This directory exposes interfaces for interactive with - EFI variables. For more information on EFI variables, - see 'Variable Services' in the UEFI specification - (section 7.2 in specification version 2.3 Errata D). - - In summary, EFI variables are named, and are classified - into separate namespaces through the use of a vendor - GUID. They also have an arbitrary binary value - associated with them. - - The efivars module enumerates these variables and - creates a separate directory for each one found. Each - directory has a name of the form "<key>-<vendor guid>" - and contains the following files: - - =============== ======================================== - attributes: A read-only text file enumerating the - EFI variable flags. Potential values - include: - - EFI_VARIABLE_NON_VOLATILE - EFI_VARIABLE_BOOTSERVICE_ACCESS - EFI_VARIABLE_RUNTIME_ACCESS - EFI_VARIABLE_HARDWARE_ERROR_RECORD - EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS - - See the EFI documentation for an - explanation of each of these variables. - - data: A read-only binary file that can be read - to attain the value of the EFI variable - - guid: The vendor GUID of the variable. This - should always match the GUID in the - variable's name. - - raw_var: A binary file that can be read to obtain - a structure that contains everything - there is to know about the variable. - For structure definition see "struct - efi_variable" in the kernel sources. - - This file can also be written to in - order to update the value of a variable. - For this to work however, all fields of - the "struct efi_variable" passed must - match byte for byte with the structure - read out of the file, save for the value - portion. - - **Note** the efi_variable structure - read/written with this file contains a - 'long' type that may change widths - depending on your underlying - architecture. - - size: As ASCII representation of the size of - the variable's value. - =============== ======================================== - - - In addition, two other magic binary files are provided - in the top-level directory and are used for adding and - removing variables: - - =============== ======================================== - new_var: Takes a "struct efi_variable" and - instructs the EFI firmware to create a - new variable. - - del_var: Takes a "struct efi_variable" and - instructs the EFI firmware to remove any - variable that has a matching vendor GUID - and variable key name. - =============== ======================================== diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ffs b/Documentation/ABI/testing/configfs-usb-gadget-ffs index e39b27653c65c..bf8936ff6d38c 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-ffs +++ b/Documentation/ABI/testing/configfs-usb-gadget-ffs @@ -4,6 +4,14 @@ KernelVersion: 3.13 Description: The purpose of this directory is to create and remove it. A corresponding USB function instance is created/removed. - There are no attributes here. - All parameters are set through FunctionFS. + All attributes are read only: + + ============= ============================================ + ready 1 if the function is ready to be used, E.G. + if userspace has written descriptors and + strings to ep0, so the gadget can be + enabled - 0 otherwise. + ============= ============================================ + + All other parameters are set through FunctionFS. diff --git a/Documentation/ABI/testing/debugfs-cxl b/Documentation/ABI/testing/debugfs-cxl index fe61d372e3fac..c61f9b8139730 100644 --- a/Documentation/ABI/testing/debugfs-cxl +++ b/Documentation/ABI/testing/debugfs-cxl @@ -33,3 +33,37 @@ Description: device cannot clear poison from the address, -ENXIO is returned. The clear_poison attribute is only visible for devices supporting the capability. + +What: /sys/kernel/debug/cxl/einj_types +Date: January, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) Prints the CXL protocol error types made available by + the platform in the format: + + 0x<error number> <error type> + + The possible error types are (as of ACPI v6.5): + + 0x1000 CXL.cache Protocol Correctable + 0x2000 CXL.cache Protocol Uncorrectable non-fatal + 0x4000 CXL.cache Protocol Uncorrectable fatal + 0x8000 CXL.mem Protocol Correctable + 0x10000 CXL.mem Protocol Uncorrectable non-fatal + 0x20000 CXL.mem Protocol Uncorrectable fatal + + The <error number> can be written to einj_inject to inject + <error type> into a chosen dport. + +What: /sys/kernel/debug/cxl/$dport_dev/einj_inject +Date: January, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (WO) Writing an integer to this file injects the corresponding + CXL protocol error into $dport_dev ($dport_dev will be a device + name from /sys/bus/pci/devices). The integer to type mapping for + injection can be found by reading from einj_types. If the dport + was enumerated in RCH mode, a CXL 1.1 error is injected, otherwise + a CXL 2.0 error is injected. diff --git a/Documentation/ABI/testing/debugfs-driver-qat b/Documentation/ABI/testing/debugfs-driver-qat index b2db010d851ee..bd6793760f298 100644 --- a/Documentation/ABI/testing/debugfs-driver-qat +++ b/Documentation/ABI/testing/debugfs-driver-qat @@ -81,3 +81,29 @@ Description: (RO) Read returns, for each Acceleration Engine (AE), the number <N>: Number of Compress and Verify (CnV) errors and type of the last CnV error detected by Acceleration Engine N. + +What: /sys/kernel/debug/qat_<device>_<BDF>/heartbeat/inject_error +Date: March 2024 +KernelVersion: 6.8 +Contact: qat-linux@intel.com +Description: (WO) Write to inject an error that simulates an heartbeat + failure. This is to be used for testing purposes. + + After writing this file, the driver stops arbitration on a + random engine and disables the fetching of heartbeat counters. + If a workload is running on the device, a job submitted to the + accelerator might not get a response and a read of the + `heartbeat/status` attribute might report -1, i.e. device + unresponsive. + The error is unrecoverable thus the device must be restarted to + restore its functionality. + + This attribute is available only when the kernel is built with + CONFIG_CRYPTO_DEV_QAT_ERROR_INJECTION=y. + + A write of 1 enables error injection. + + The following example shows how to enable error injection:: + + # cd /sys/kernel/debug/qat_<device>_<BDF> + # echo 1 > heartbeat/inject_error diff --git a/Documentation/ABI/testing/debugfs-hisi-hpre b/Documentation/ABI/testing/debugfs-hisi-hpre index 8e8de49c5cc66..d4e16ef9ac9a9 100644 --- a/Documentation/ABI/testing/debugfs-hisi-hpre +++ b/Documentation/ABI/testing/debugfs-hisi-hpre @@ -111,6 +111,28 @@ Description: QM debug registers(regs) read hardware register value. This node is used to show the change of the qm register values. This node can be help users to check the change of register values. +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/qm_state +Date: Jan 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the state of the device. + 0: busy, 1: idle. + Only available for PF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_timeout +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Set the wait time when stop queue fails. Available for both PF + and VF, and take no other effect on HPRE. + 0: not wait(default), others value: wait dev_timeout * 20 microsecond. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_state +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the stop queue status of the QM. The default value is 0, + if dev_timeout is set, when stop queue fails, the dev_state + will return non-zero value. Available for both PF and VF, + and take no other effect on HPRE. + What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/diff_regs Date: Mar 2022 Contact: linux-crypto@vger.kernel.org diff --git a/Documentation/ABI/testing/debugfs-hisi-sec b/Documentation/ABI/testing/debugfs-hisi-sec index deeefe2c735ed..6c6c9a6e150ac 100644 --- a/Documentation/ABI/testing/debugfs-hisi-sec +++ b/Documentation/ABI/testing/debugfs-hisi-sec @@ -91,6 +91,28 @@ Description: QM debug registers(regs) read hardware register value. This node is used to show the change of the qm register values. This node can be help users to check the change of register values. +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_state +Date: Jan 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the state of the device. + 0: busy, 1: idle. + Only available for PF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/dev_timeout +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Set the wait time when stop queue fails. Available for both PF + and VF, and take no other effect on SEC. + 0: not wait(default), others value: wait dev_timeout * 20 microsecond. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/dev_state +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the stop queue status of the QM. The default value is 0, + if dev_timeout is set, when stop queue fails, the dev_state + will return non-zero value. Available for both PF and VF, + and take no other effect on SEC. + What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/diff_regs Date: Mar 2022 Contact: linux-crypto@vger.kernel.org diff --git a/Documentation/ABI/testing/debugfs-hisi-zip b/Documentation/ABI/testing/debugfs-hisi-zip index 593714afaed24..a22dd69422193 100644 --- a/Documentation/ABI/testing/debugfs-hisi-zip +++ b/Documentation/ABI/testing/debugfs-hisi-zip @@ -104,6 +104,28 @@ Description: QM debug registers(regs) read hardware register value. This node is used to show the change of the qm registers value. This node can be help users to check the change of register values. +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/qm_state +Date: Jan 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the state of the device. + 0: busy, 1: idle. + Only available for PF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/dev_timeout +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Set the wait time when stop queue fails. Available for both PF + and VF, and take no other effect on ZIP. + 0: not wait(default), others value: wait dev_timeout * 20 microsecond. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/dev_state +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the stop queue status of the QM. The default value is 0, + if dev_timeout is set, when stop queue fails, the dev_state + will return non-zero value. Available for both PF and VF, + and take no other effect on ZIP. + What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/diff_regs Date: Mar 2022 Contact: linux-crypto@vger.kernel.org diff --git a/Documentation/ABI/testing/debugfs-intel-iommu b/Documentation/ABI/testing/debugfs-intel-iommu new file mode 100644 index 0000000000000..2ab8464504a99 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-intel-iommu @@ -0,0 +1,276 @@ +What: /sys/kernel/debug/iommu/intel/iommu_regset +Date: December 2023 +Contact: Jingqi Liu <Jingqi.liu@intel.com> +Description: + This file dumps all the register contents for each IOMMU device. + + Example in Kabylake: + + :: + + $ sudo cat /sys/kernel/debug/iommu/intel/iommu_regset + + IOMMU: dmar0 Register Base Address: 26be37000 + + Name Offset Contents + VER 0x00 0x0000000000000010 + GCMD 0x18 0x0000000000000000 + GSTS 0x1c 0x00000000c7000000 + FSTS 0x34 0x0000000000000000 + FECTL 0x38 0x0000000000000000 + + [...] + + IOMMU: dmar1 Register Base Address: fed90000 + + Name Offset Contents + VER 0x00 0x0000000000000010 + GCMD 0x18 0x0000000000000000 + GSTS 0x1c 0x00000000c7000000 + FSTS 0x34 0x0000000000000000 + FECTL 0x38 0x0000000000000000 + + [...] + + IOMMU: dmar2 Register Base Address: fed91000 + + Name Offset Contents + VER 0x00 0x0000000000000010 + GCMD 0x18 0x0000000000000000 + GSTS 0x1c 0x00000000c7000000 + FSTS 0x34 0x0000000000000000 + FECTL 0x38 0x0000000000000000 + + [...] + +What: /sys/kernel/debug/iommu/intel/ir_translation_struct +Date: December 2023 +Contact: Jingqi Liu <Jingqi.liu@intel.com> +Description: + This file dumps the table entries for Interrupt + remapping and Interrupt posting. + + Example in Kabylake: + + :: + + $ sudo cat /sys/kernel/debug/iommu/intel/ir_translation_struct + + Remapped Interrupt supported on IOMMU: dmar0 + IR table address:100900000 + + Entry SrcID DstID Vct IRTE_high IRTE_low + 0 00:0a.0 00000080 24 0000000000040050 000000800024000d + 1 00:0a.0 00000001 ef 0000000000040050 0000000100ef000d + + Remapped Interrupt supported on IOMMU: dmar1 + IR table address:100300000 + Entry SrcID DstID Vct IRTE_high IRTE_low + 0 00:02.0 00000002 26 0000000000040010 000000020026000d + + [...] + + **** + + Posted Interrupt supported on IOMMU: dmar0 + IR table address:100900000 + Entry SrcID PDA_high PDA_low Vct IRTE_high IRTE_low + +What: /sys/kernel/debug/iommu/intel/dmar_translation_struct +Date: December 2023 +Contact: Jingqi Liu <Jingqi.liu@intel.com> +Description: + This file dumps Intel IOMMU DMA remapping tables, such + as root table, context table, PASID directory and PASID + table entries in debugfs. For legacy mode, it doesn't + support PASID, and hence PASID field is defaulted to + '-1' and other PASID related fields are invalid. + + Example in Kabylake: + + :: + + $ sudo cat /sys/kernel/debug/iommu/intel/dmar_translation_struct + + IOMMU dmar1: Root Table Address: 0x103027000 + B.D.F Root_entry + 00:02.0 0x0000000000000000:0x000000010303e001 + + Context_entry + 0x0000000000000102:0x000000010303f005 + + PASID PASID_table_entry + -1 0x0000000000000000:0x0000000000000000:0x0000000000000000 + + IOMMU dmar0: Root Table Address: 0x103028000 + B.D.F Root_entry + 00:0a.0 0x0000000000000000:0x00000001038a7001 + + Context_entry + 0x0000000000000000:0x0000000103220e7d + + PASID PASID_table_entry + 0 0x0000000000000000:0x0000000000800002:0x00000001038a5089 + + [...] + +What: /sys/kernel/debug/iommu/intel/invalidation_queue +Date: December 2023 +Contact: Jingqi Liu <Jingqi.liu@intel.com> +Description: + This file exports invalidation queue internals of each + IOMMU device. + + Example in Kabylake: + + :: + + $ sudo cat /sys/kernel/debug/iommu/intel/invalidation_queue + + Invalidation queue on IOMMU: dmar0 + Base: 0x10022e000 Head: 20 Tail: 20 + Index qw0 qw1 qw2 + 0 0000000000000014 0000000000000000 0000000000000000 + 1 0000000200000025 0000000100059c04 0000000000000000 + 2 0000000000000014 0000000000000000 0000000000000000 + + qw3 status + 0000000000000000 0000000000000000 + 0000000000000000 0000000000000000 + 0000000000000000 0000000000000000 + + [...] + + Invalidation queue on IOMMU: dmar1 + Base: 0x10026e000 Head: 32 Tail: 32 + Index qw0 qw1 status + 0 0000000000000004 0000000000000000 0000000000000000 + 1 0000000200000025 0000000100059804 0000000000000000 + 2 0000000000000011 0000000000000000 0000000000000000 + + [...] + +What: /sys/kernel/debug/iommu/intel/dmar_perf_latency +Date: December 2023 +Contact: Jingqi Liu <Jingqi.liu@intel.com> +Description: + This file is used to control and show counts of + execution time ranges for various types per DMAR. + + Firstly, write a value to + /sys/kernel/debug/iommu/intel/dmar_perf_latency + to enable sampling. + + The possible values are as follows: + + * 0 - disable sampling all latency data + + * 1 - enable sampling IOTLB invalidation latency data + + * 2 - enable sampling devTLB invalidation latency data + + * 3 - enable sampling intr entry cache invalidation latency data + + Next, read /sys/kernel/debug/iommu/intel/dmar_perf_latency gives + a snapshot of sampling result of all enabled monitors. + + Examples in Kabylake: + + :: + + 1) Disable sampling all latency data: + + $ sudo echo 0 > /sys/kernel/debug/iommu/intel/dmar_perf_latency + + 2) Enable sampling IOTLB invalidation latency data + + $ sudo echo 1 > /sys/kernel/debug/iommu/intel/dmar_perf_latency + + $ sudo cat /sys/kernel/debug/iommu/intel/dmar_perf_latency + + IOMMU: dmar0 Register Base Address: 26be37000 + <0.1us 0.1us-1us 1us-10us 10us-100us 100us-1ms + inv_iotlb 0 0 0 0 0 + + 1ms-10ms >=10ms min(us) max(us) average(us) + inv_iotlb 0 0 0 0 0 + + [...] + + IOMMU: dmar2 Register Base Address: fed91000 + <0.1us 0.1us-1us 1us-10us 10us-100us 100us-1ms + inv_iotlb 0 0 18 0 0 + + 1ms-10ms >=10ms min(us) max(us) average(us) + inv_iotlb 0 0 2 2 2 + + 3) Enable sampling devTLB invalidation latency data + + $ sudo echo 2 > /sys/kernel/debug/iommu/intel/dmar_perf_latency + + $ sudo cat /sys/kernel/debug/iommu/intel/dmar_perf_latency + + IOMMU: dmar0 Register Base Address: 26be37000 + <0.1us 0.1us-1us 1us-10us 10us-100us 100us-1ms + inv_devtlb 0 0 0 0 0 + + >=10ms min(us) max(us) average(us) + inv_devtlb 0 0 0 0 + + [...] + +What: /sys/kernel/debug/iommu/intel/<bdf>/domain_translation_struct +Date: December 2023 +Contact: Jingqi Liu <Jingqi.liu@intel.com> +Description: + This file dumps a specified page table of Intel IOMMU + in legacy mode or scalable mode. + + For a device that only supports legacy mode, dump its + page table by the debugfs file in the debugfs device + directory. e.g. + /sys/kernel/debug/iommu/intel/0000:00:02.0/domain_translation_struct. + + For a device that supports scalable mode, dump the + page table of specified pasid by the debugfs file in + the debugfs pasid directory. e.g. + /sys/kernel/debug/iommu/intel/0000:00:02.0/1/domain_translation_struct. + + Examples in Kabylake: + + :: + + 1) Dump the page table of device "0000:00:02.0" that only supports legacy mode. + + $ sudo cat /sys/kernel/debug/iommu/intel/0000:00:02.0/domain_translation_struct + + Device 0000:00:02.0 @0x1017f8000 + IOVA_PFN PML5E PML4E + 0x000000008d800 | 0x0000000000000000 0x00000001017f9003 + 0x000000008d801 | 0x0000000000000000 0x00000001017f9003 + 0x000000008d802 | 0x0000000000000000 0x00000001017f9003 + + PDPE PDE PTE + 0x00000001017fa003 0x00000001017fb003 0x000000008d800003 + 0x00000001017fa003 0x00000001017fb003 0x000000008d801003 + 0x00000001017fa003 0x00000001017fb003 0x000000008d802003 + + [...] + + 2) Dump the page table of device "0000:00:0a.0" with PASID "1" that + supports scalable mode. + + $ sudo cat /sys/kernel/debug/iommu/intel/0000:00:0a.0/1/domain_translation_struct + + Device 0000:00:0a.0 with pasid 1 @0x10c112000 + IOVA_PFN PML5E PML4E + 0x0000000000000 | 0x0000000000000000 0x000000010df93003 + 0x0000000000001 | 0x0000000000000000 0x000000010df93003 + 0x0000000000002 | 0x0000000000000000 0x000000010df93003 + + PDPE PDE PTE + 0x0000000106ae6003 0x0000000104b38003 0x0000000147c00803 + 0x0000000106ae6003 0x0000000104b38003 0x0000000147c01803 + 0x0000000106ae6003 0x0000000104b38003 0x0000000147c02803 + + [...] diff --git a/Documentation/ABI/testing/debugfs-msi-wmi-platform b/Documentation/ABI/testing/debugfs-msi-wmi-platform new file mode 100644 index 0000000000000..71f9992168d89 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-msi-wmi-platform @@ -0,0 +1,14 @@ +What: /sys/kernel/debug/msi-wmi-platform-<wmi_device_name>/* +Date: April 2024 +KernelVersion: 6.10 +Contact: Armin Wolf <W_Armin@gmx.de> +Description: + This file allows to execute the associated WMI method with the same name. + + To start the execution, write a buffer containing the method arguments + at file offset 0. Partial writes or writes at a different offset are not + supported. + + The buffer returned by the WMI method can then be read from the file. + + See Documentation/wmi/devices/msi-wmi-platform.rst for details. diff --git a/Documentation/ABI/testing/gpio-cdev b/Documentation/ABI/testing/gpio-cdev index 66bdcd188b6c9..c9689b2a6fed2 100644 --- a/Documentation/ABI/testing/gpio-cdev +++ b/Documentation/ABI/testing/gpio-cdev @@ -6,8 +6,9 @@ Description: The character device files /dev/gpiochip* are the interface between GPIO chips and userspace. - The ioctl(2)-based ABI is defined and documented in - [include/uapi]<linux/gpio.h>. + The ioctl(2)-based ABI is defined in + [include/uapi]<linux/gpio.h> and documented in + Documentation/userspace-api/gpio/chardev.rst. The following file operations are supported: @@ -17,8 +18,8 @@ Description: ioctl(2) Initiate various actions. - See the inline documentation in [include/uapi]<linux/gpio.h> - for descriptions of all ioctls. + See Documentation/userspace-api/gpio/chardev.rst + for a description of all ioctls. close(2) Stops and free up the I/O contexts that was associated diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm index 4dd49b159543b..b4d0fc8d319df 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm @@ -170,3 +170,90 @@ Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_t Description: (RW) Set/Get the MSR(mux select register) for the DSB subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_mode +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: (Write) Set the data collection mode of CMB tpdm. Continuous + change creates CMB data set elements on every CMBCLK edge. + Trace-on-change creates CMB data set elements only when a new + data set element differs in value from the previous element + in a CMB data set. + + Accepts only one of the 2 values - 0 or 1. + 0 : Continuous CMB collection mode. + 1 : Trace-on-change CMB collection mode. + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_trig_patt/xpr[0:1] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the value of the trigger pattern for the CMB + subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_trig_patt/xpmr[0:1] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the mask of the trigger pattern for the CMB + subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_patt/tpr[0:1] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the value of the pattern for the CMB subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_patt/tpmr[0:1] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the mask of the pattern for the CMB subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_patt/enable_ts +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (Write) Set the pattern timestamp of CMB tpdm. Read + the pattern timestamp of CMB tpdm. + + Accepts only one of the 2 values - 0 or 1. + 0 : Disable CMB pattern timestamp. + 1 : Enable CMB pattern timestamp. + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_trig_ts +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the trigger timestamp of the CMB for tpdm. + + Accepts only one of the 2 values - 0 or 1. + 0 : Set the CMB trigger type to false + 1 : Set the CMB trigger type to true + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_ts_all +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Read or write the status of timestamp upon all interface. + Only value 0 and 1 can be written to this node. Set this node to 1 to requeset + timestamp to all trace packet. + Accepts only one of the 2 values - 0 or 1. + 0 : Disable the timestamp of all trace packets. + 1 : Enable the timestamp of all trace packets. + +What: /sys/bus/coresight/devices/<tpdm-name>/cmb_msr/msr[0:31] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the MSR(mux select register) for the CMB subunit + TPDM. diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index fff2581b80335..3f5627a1210a1 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -552,3 +552,37 @@ Description: attribute is only visible for devices supporting the capability. The retrieved errors are logged as kernel events when cxl_poison event tracing is enabled. + + +What: /sys/bus/cxl/devices/regionZ/accessY/read_bandwidth + /sys/bus/cxl/devices/regionZ/accessY/write_banwidth +Date: Jan, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) The aggregated read or write bandwidth of the region. The + number is the accumulated read or write bandwidth of all CXL memory + devices that contributes to the region in MB/s. It is + identical data that should appear in + /sys/devices/system/node/nodeX/accessY/initiators/read_bandwidth or + /sys/devices/system/node/nodeX/accessY/initiators/write_bandwidth. + See Documentation/ABI/stable/sysfs-devices-node. access0 provides + the number to the closest initiator and access1 provides the + number to the closest CPU. + + +What: /sys/bus/cxl/devices/regionZ/accessY/read_latency + /sys/bus/cxl/devices/regionZ/accessY/write_latency +Date: Jan, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) The read or write latency of the region. The number is + the worst read or write latency of all CXL memory devices that + contributes to the region in nanoseconds. It is identical data + that should appear in + /sys/devices/system/node/nodeX/accessY/initiators/read_latency or + /sys/devices/system/node/nodeX/accessY/initiators/write_latency. + See Documentation/ABI/stable/sysfs-devices-node. access0 provides + the number to the closest initiator and access1 provides the + number to the closest CPU. diff --git a/Documentation/ABI/testing/sysfs-bus-dax b/Documentation/ABI/testing/sysfs-bus-dax new file mode 100644 index 0000000000000..b34266bfae49a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-dax @@ -0,0 +1,153 @@ +What: /sys/bus/dax/devices/daxX.Y/align +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RW) Provides a way to specify an alignment for a dax device. + Values allowed are constrained by the physical address ranges + that back the dax device, and also by arch requirements. + +What: /sys/bus/dax/devices/daxX.Y/mapping +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (WO) Provides a way to allocate a mapping range under a dax + device. Specified in the format <start>-<end>. + +What: /sys/bus/dax/devices/daxX.Y/mapping[0..N]/start +What: /sys/bus/dax/devices/daxX.Y/mapping[0..N]/end +What: /sys/bus/dax/devices/daxX.Y/mapping[0..N]/page_offset +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RO) A dax device may have multiple constituent discontiguous + address ranges. These are represented by the different + 'mappingX' subdirectories. The 'start' attribute indicates the + start physical address for the given range. The 'end' attribute + indicates the end physical address for the given range. The + 'page_offset' attribute indicates the offset of the current + range in the dax device. + +What: /sys/bus/dax/devices/daxX.Y/resource +Date: June, 2019 +KernelVersion: v5.3 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The resource attribute indicates the starting physical + address of a dax device. In case of a device with multiple + constituent ranges, it indicates the starting address of the + first range. + +What: /sys/bus/dax/devices/daxX.Y/size +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RW) The size attribute indicates the total size of a dax + device. For creating subdivided dax devices, or for resizing + an existing device, the new size can be written to this as + part of the reconfiguration process. + +What: /sys/bus/dax/devices/daxX.Y/numa_node +Date: November, 2019 +KernelVersion: v5.5 +Contact: nvdimm@lists.linux.dev +Description: + (RO) If NUMA is enabled and the platform has affinitized the + backing device for this dax device, emit the CPU node + affinity for this device. + +What: /sys/bus/dax/devices/daxX.Y/target_node +Date: February, 2019 +KernelVersion: v5.1 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The target-node attribute is the Linux numa-node that a + device-dax instance may create when it is online. Prior to + being online the device's 'numa_node' property reflects the + closest online cpu node which is the typical expectation of a + device 'numa_node'. Once it is online it becomes its own + distinct numa node. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/available_size +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The available_size attribute tracks available dax region + capacity. This only applies to volatile hmem devices, not pmem + devices, since pmem devices are defined by nvdimm namespace + boundaries. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/size +Date: July, 2017 +KernelVersion: v5.1 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The size attribute indicates the size of a given dax region + in bytes. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/align +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The align attribute indicates alignment of the dax region. + Changes on align may not always be valid, when say certain + mappings were created with 2M and then we switch to 1G. This + validates all ranges against the new value being attempted, post + resizing. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/seed +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The seed device is a concept for dynamic dax regions to be + able to split the region amongst multiple sub-instances. The + seed device, similar to libnvdimm seed devices, is a device + that starts with zero capacity allocated and unbound to a + driver. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/create +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (RW) The create interface to the dax region provides a way to + create a new unconfigured dax device under the given region, which + can then be configured (with a size etc.) and then probed. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/delete +Date: October, 2020 +KernelVersion: v5.10 +Contact: nvdimm@lists.linux.dev +Description: + (WO) The delete interface for a dax region provides for deletion + of any 0-sized and idle dax devices. + +What: $(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/id +Date: July, 2017 +KernelVersion: v5.1 +Contact: nvdimm@lists.linux.dev +Description: + (RO) The id attribute indicates the region id of a dax region. + +What: /sys/bus/dax/devices/daxX.Y/memmap_on_memory +Date: January, 2024 +KernelVersion: v6.8 +Contact: nvdimm@lists.linux.dev +Description: + (RW) Control the memmap_on_memory setting if the dax device + were to be hotplugged as system memory. This determines whether + the 'altmap' for the hotplugged memory will be placed on the + device being hotplugged (memmap_on_memory=1) or if it will be + placed on regular memory (memmap_on_memory=0). This attribute + must be set before the device is handed over to the 'kmem' + driver (i.e. hotplugged into system-ram). Additionally, this + depends on CONFIG_MHP_MEMMAP_ON_MEMORY, and a globally enabled + memmap_on_memory parameter for memory_hotplug. This is + typically set on the kernel command line - + memory_hotplug.memmap_on_memory set to 'true' or 'force'." diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934 b/Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934 new file mode 100644 index 0000000000000..625b7f8678478 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934 @@ -0,0 +1,9 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_shunt_resistorY +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + The value of the shunt resistor may be known only at runtime + and set by a client application. This attribute allows to + set its value in micro-ohms. X is the IIO index of the device. + Y is the channel number. The value is used to calculate + current, power and accumulated energy. diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats index 860db53037a58..d1f67bb81d5d1 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats @@ -11,7 +11,7 @@ saw any problems). What: /sys/bus/pci/devices/<dev>/aer_dev_correctable Date: July 2018 -KernelVersion: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: List of correctable errors seen and reported by this PCI device using ERR_COR. Note that since multiple errors may @@ -32,7 +32,7 @@ Description: List of correctable errors seen and reported by this What: /sys/bus/pci/devices/<dev>/aer_dev_fatal Date: July 2018 -KernelVersion: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: List of uncorrectable fatal errors seen and reported by this PCI device using ERR_FATAL. Note that since multiple errors may @@ -62,7 +62,7 @@ Description: List of uncorrectable fatal errors seen and reported by this What: /sys/bus/pci/devices/<dev>/aer_dev_nonfatal Date: July 2018 -KernelVersion: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: List of uncorrectable nonfatal errors seen and reported by this PCI device using ERR_NONFATAL. Note that since multiple errors @@ -100,20 +100,20 @@ collectors) that are AER capable. These indicate the number of error messages as device, so these counters include them and are thus cumulative of all the error messages on the PCI hierarchy originating at that root port. -What: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor +What: /sys/bus/pci/devices/<dev>/aer_rootport_total_err_cor Date: July 2018 -KernelVersion: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: Total number of ERR_COR messages reported to rootport. -What: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal +What: /sys/bus/pci/devices/<dev>/aer_rootport_total_err_fatal Date: July 2018 -KernelVersion: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: Total number of ERR_FATAL messages reported to rootport. -What: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal +What: /sys/bus/pci/devices/<dev>/aer_rootport_total_err_nonfatal Date: July 2018 -KernelVersion: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: Total number of ERR_NONFATAL messages reported to rootport. diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-avs b/Documentation/ABI/testing/sysfs-bus-pci-devices-avs new file mode 100644 index 0000000000000..ebff3fa12055d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-avs @@ -0,0 +1,8 @@ +What: /sys/devices/pci0000:00/<dev>/avs/fw_version +Date: February 2024 +Contact: Cezary Rojewski <cezary.rojewski@intel.com> +Description: + Version of AudioDSP firmware ASoC avs driver is communicating + with. + + Format: %d.%d.%d.%d, type:major:minor:build. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 2b7108e219775..af9b653422f16 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -442,6 +442,16 @@ What: /sys/bus/usb/devices/usbX/descriptors Description: Contains the interface descriptors, in binary. +What: /sys/bus/usb/devices/usbX/bos_descriptors +Date: March 2024 +Contact: Elbert Mai <code@elbertmai.com> +Description: + Binary file containing the cached binary device object store (BOS) + of the device. This consists of the BOS descriptor followed by the + set of device capability descriptors. All descriptors read from + this file are in bus-endian format. Note that the kernel will not + request the BOS from a device if its bcdUSB is less than 0x0201. + What: /sys/bus/usb/devices/usbX/idProduct Description: Product ID, in hexadecimal. diff --git a/Documentation/ABI/testing/sysfs-bus-vdpa b/Documentation/ABI/testing/sysfs-bus-vdpa index 4da53878bff6b..2c833b5163f21 100644 --- a/Documentation/ABI/testing/sysfs-bus-vdpa +++ b/Documentation/ABI/testing/sysfs-bus-vdpa @@ -1,6 +1,6 @@ What: /sys/bus/vdpa/drivers_autoprobe Date: March 2020 -Contact: virtualization@lists.linux-foundation.org +Contact: virtualization@lists.linux.dev Description: This file determines whether new devices are immediately bound to a driver after the creation. It initially contains 1, which @@ -12,7 +12,7 @@ Description: What: /sys/bus/vdpa/driver_probe Date: March 2020 -Contact: virtualization@lists.linux-foundation.org +Contact: virtualization@lists.linux.dev Description: Writing a device name to this file will cause the kernel binds devices to a compatible driver. @@ -22,7 +22,7 @@ Description: What: /sys/bus/vdpa/drivers/.../bind Date: March 2020 -Contact: virtualization@lists.linux-foundation.org +Contact: virtualization@lists.linux.dev Description: Writing a device name to this file will cause the driver to attempt to bind to the device. This is useful for overriding @@ -30,7 +30,7 @@ Description: What: /sys/bus/vdpa/drivers/.../unbind Date: March 2020 -Contact: virtualization@lists.linux-foundation.org +Contact: virtualization@lists.linux.dev Description: Writing a device name to this file will cause the driver to attempt to unbind from the device. This may be useful when @@ -38,7 +38,7 @@ Description: What: /sys/bus/vdpa/devices/.../driver_override Date: November 2021 -Contact: virtualization@lists.linux-foundation.org +Contact: virtualization@lists.linux.dev Description: This file allows the driver for a device to be specified. When specified, only a driver with a name matching the value diff --git a/Documentation/ABI/testing/sysfs-class-hwmon b/Documentation/ABI/testing/sysfs-class-hwmon index 3dac923c9b0ef..cfd0d0bab4839 100644 --- a/Documentation/ABI/testing/sysfs-class-hwmon +++ b/Documentation/ABI/testing/sysfs-class-hwmon @@ -149,6 +149,15 @@ Description: RW +What: /sys/class/hwmon/hwmonX/inY_fault +Description: + Reports a voltage hard failure (eg: shorted component) + + - 1: Failed + - 0: Ok + + RO + What: /sys/class/hwmon/hwmonX/cpuY_vid Description: CPU core reference voltage. @@ -968,6 +977,15 @@ Description: RW +What: /sys/class/hwmon/hwmonX/humidityY_max_alarm +Description: + Maximum humidity detection + + - 0: OK + - 1: Maximum humidity detected + + RO + What: /sys/class/hwmon/hwmonX/humidityY_max_hyst Description: Humidity hysteresis value for max limit. @@ -987,6 +1005,15 @@ Description: RW +What: /sys/class/hwmon/hwmonX/humidityY_min_alarm +Description: + Minimum humidity detection + + - 0: OK + - 1: Minimum humidity detected + + RO + What: /sys/class/hwmon/hwmonX/humidityY_min_hyst Description: Humidity hysteresis value for min limit. diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev index a6c307c4befa0..ed46b37ab8a28 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -88,6 +88,8 @@ Description: speed of 10MBps of the named network device. Setting this value also immediately changes the LED state. + Present only if the named network device supports 10Mbps link speed. + What: /sys/class/leds/<led>/link_100 Date: Jun 2023 KernelVersion: 6.5 @@ -101,6 +103,8 @@ Description: speed of 100Mbps of the named network device. Setting this value also immediately changes the LED state. + Present only if the named network device supports 100Mbps link speed. + What: /sys/class/leds/<led>/link_1000 Date: Jun 2023 KernelVersion: 6.5 @@ -114,6 +118,8 @@ Description: speed of 1000Mbps of the named network device. Setting this value also immediately changes the LED state. + Present only if the named network device supports 1000Mbps link speed. + What: /sys/class/leds/<led>/link_2500 Date: Nov 2023 KernelVersion: 6.8 @@ -127,6 +133,8 @@ Description: speed of 2500Mbps of the named network device. Setting this value also immediately changes the LED state. + Present only if the named network device supports 2500Mbps link speed. + What: /sys/class/leds/<led>/link_5000 Date: Nov 2023 KernelVersion: 6.8 @@ -140,6 +148,8 @@ Description: speed of 5000Mbps of the named network device. Setting this value also immediately changes the LED state. + Present only if the named network device supports 5000Mbps link speed. + What: /sys/class/leds/<led>/link_10000 Date: Nov 2023 KernelVersion: 6.8 @@ -153,6 +163,8 @@ Description: speed of 10000Mbps of the named network device. Setting this value also immediately changes the LED state. + Present only if the named network device supports 10000Mbps link speed. + What: /sys/class/leds/<led>/half_duplex Date: Jun 2023 KernelVersion: 6.5 diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-tty b/Documentation/ABI/testing/sysfs-class-led-trigger-tty index 30cef9ac0f493..308fbc3627cd1 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-tty +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-tty @@ -1,11 +1,11 @@ -What: /sys/class/leds/<led>/ttyname +What: /sys/class/leds/<tty_led>/ttyname Date: Dec 2020 KernelVersion: 5.10 Contact: linux-leds@vger.kernel.org Description: Specifies the tty device name of the triggering tty -What: /sys/class/leds/<led>/rx +What: /sys/class/leds/<tty_led>/rx Date: February 2024 KernelVersion: 6.8 Description: @@ -13,7 +13,7 @@ Description: If set to 0, the LED will not blink on reception. If set to 1 (default), the LED will blink on reception. -What: /sys/class/leds/<led>/tx +What: /sys/class/leds/<tty_led>/tx Date: February 2024 KernelVersion: 6.8 Description: @@ -21,7 +21,7 @@ Description: If set to 0, the LED will not blink on transmission. If set to 1 (default), the LED will blink on transmission. -What: /sys/class/leds/<led>/cts +What: /sys/class/leds/<tty_led>/cts Date: February 2024 KernelVersion: 6.8 Description: @@ -31,7 +31,7 @@ Description: If set to 0 (default), the LED will not evaluate CTS. If set to 1, the LED will evaluate CTS. -What: /sys/class/leds/<led>/dsr +What: /sys/class/leds/<tty_led>/dsr Date: February 2024 KernelVersion: 6.8 Description: @@ -41,7 +41,7 @@ Description: If set to 0 (default), the LED will not evaluate DSR. If set to 1, the LED will evaluate DSR. -What: /sys/class/leds/<led>/dcd +What: /sys/class/leds/<tty_led>/dcd Date: February 2024 KernelVersion: 6.8 Description: @@ -51,7 +51,7 @@ Description: If set to 0 (default), the LED will not evaluate CAR (DCD). If set to 1, the LED will evaluate CAR (DCD). -What: /sys/class/leds/<led>/rng +What: /sys/class/leds/<tty_led>/rng Date: February 2024 KernelVersion: 6.8 Description: diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues index 5bff64d256c20..84aa25e0d14d1 100644 --- a/Documentation/ABI/testing/sysfs-class-net-queues +++ b/Documentation/ABI/testing/sysfs-class-net-queues @@ -96,3 +96,26 @@ Description: Indicates the absolute minimum limit of bytes allowed to be queued on this network device transmit queue. Default value is 0. + +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/stall_thrs +Date: Jan 2024 +KernelVersion: 6.9 +Contact: netdev@vger.kernel.org +Description: + Tx completion stall detection threshold in ms. Kernel will + guarantee to detect all stalls longer than this threshold but + may also detect stalls longer than half of the threshold. + +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/stall_cnt +Date: Jan 2024 +KernelVersion: 6.9 +Contact: netdev@vger.kernel.org +Description: + Number of detected Tx completion stalls. + +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/stall_max +Date: Jan 2024 +KernelVersion: 6.9 +Contact: netdev@vger.kernel.org +Description: + Longest detected Tx completion stall. Write 0 to clear. diff --git a/Documentation/ABI/testing/sysfs-class-usb_role b/Documentation/ABI/testing/sysfs-class-usb_role index 3b810a425a52c..9fab3f06679e2 100644 --- a/Documentation/ABI/testing/sysfs-class-usb_role +++ b/Documentation/ABI/testing/sysfs-class-usb_role @@ -19,3 +19,9 @@ Description: - none - host - device + +What: /sys/class/usb_role/<switch>/connector +Date: Feb 2024 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Optional symlink to the USB Type-C connector. diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index a1db6db475055..e7e160954e798 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -423,7 +423,7 @@ What: /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/occ_reset Date: March 2016 Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> - Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> + Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: POWERNV CPUFreq driver's frequency throttle stats directory and attributes @@ -473,7 +473,7 @@ What: /sys/devices/system/cpu/cpufreq/policyX/throttle_stats /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/occ_reset Date: March 2016 Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> - Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> + Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: POWERNV CPUFreq driver's frequency throttle stats directory and attributes @@ -516,6 +516,7 @@ What: /sys/devices/system/cpu/vulnerabilities /sys/devices/system/cpu/vulnerabilities/mds /sys/devices/system/cpu/vulnerabilities/meltdown /sys/devices/system/cpu/vulnerabilities/mmio_stale_data + /sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling /sys/devices/system/cpu/vulnerabilities/retbleed /sys/devices/system/cpu/vulnerabilities/spec_store_bypass /sys/devices/system/cpu/vulnerabilities/spectre_v1 @@ -607,7 +608,7 @@ Description: Umwait control What: /sys/devices/system/cpu/svm Date: August 2019 Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> - Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> + Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: Secure Virtual Machine If 1, it means the system is using the Protected Execution @@ -616,7 +617,7 @@ Description: Secure Virtual Machine What: /sys/devices/system/cpu/cpuX/purr Date: Apr 2005 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: PURR ticks for this CPU since the system boot. The Processor Utilization Resources Register (PURR) is @@ -627,7 +628,7 @@ Description: PURR ticks for this CPU since the system boot. What: /sys/devices/system/cpu/cpuX/spurr Date: Dec 2006 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: SPURR ticks for this CPU since the system boot. The Scaled Processor Utilization Resources Register @@ -639,7 +640,7 @@ Description: SPURR ticks for this CPU since the system boot. What: /sys/devices/system/cpu/cpuX/idle_purr Date: Apr 2020 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: PURR ticks for cpuX when it was idle. This sysfs interface exposes the number of PURR ticks @@ -647,7 +648,7 @@ Description: PURR ticks for cpuX when it was idle. What: /sys/devices/system/cpu/cpuX/idle_spurr Date: Apr 2020 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: SPURR ticks for cpuX when it was idle. This sysfs interface exposes the number of SPURR ticks diff --git a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon index 023fd82de3f70..d792a56f59acf 100644 --- a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon +++ b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon @@ -10,7 +10,7 @@ Description: RW. Card reactive sustained (PL1) power limit in microwatts. power limit is disabled, writing 0 disables the limit. Writing values > 0 and <= TDP will enable the power limit. - Only supported for particular Intel xe graphics platforms. + Only supported for particular Intel Xe graphics platforms. What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_rated_max Date: September 2023 @@ -18,53 +18,93 @@ KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org Description: RO. Card default power limit (default TDP setting). - Only supported for particular Intel xe graphics platforms. + Only supported for particular Intel Xe graphics platforms. -What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_crit + +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy1_input Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org -Description: RW. Card reactive critical (I1) power limit in microwatts. +Description: RO. Card energy input of device in microjoules. + + Only supported for particular Intel Xe graphics platforms. + +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max_interval +Date: October 2023 +KernelVersion: 6.6 +Contact: intel-xe@lists.freedesktop.org +Description: RW. Card sustained power limit interval (Tau in PL1/Tau) in + milliseconds over which sustained power is averaged. + + Only supported for particular Intel Xe graphics platforms. + +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power2_max +Date: February 2024 +KernelVersion: 6.8 +Contact: intel-xe@lists.freedesktop.org +Description: RW. Package reactive sustained (PL1) power limit in microwatts. + + The power controller will throttle the operating frequency + if the power averaged over a window (typically seconds) + exceeds this limit. A read value of 0 means that the PL1 + power limit is disabled, writing 0 disables the + limit. Writing values > 0 and <= TDP will enable the power limit. + + Only supported for particular Intel Xe graphics platforms. + +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power2_rated_max +Date: February 2024 +KernelVersion: 6.8 +Contact: intel-xe@lists.freedesktop.org +Description: RO. Package default power limit (default TDP setting). - Card reactive critical (I1) power limit in microwatts is exposed + Only supported for particular Intel Xe graphics platforms. + +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power2_crit +Date: February 2024 +KernelVersion: 6.8 +Contact: intel-xe@lists.freedesktop.org +Description: RW. Package reactive critical (I1) power limit in microwatts. + + Package reactive critical (I1) power limit in microwatts is exposed for client products. The power controller will throttle the operating frequency if the power averaged over a window exceeds this limit. - Only supported for particular Intel xe graphics platforms. + Only supported for particular Intel Xe graphics platforms. -What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr1_crit -Date: September 2023 -KernelVersion: 6.5 +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr2_crit +Date: February 2024 +KernelVersion: 6.8 Contact: intel-xe@lists.freedesktop.org -Description: RW. Card reactive critical (I1) power limit in milliamperes. +Description: RW. Package reactive critical (I1) power limit in milliamperes. - Card reactive critical (I1) power limit in milliamperes is + Package reactive critical (I1) power limit in milliamperes is exposed for server products. The power controller will throttle the operating frequency if the power averaged over a window exceeds this limit. -What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/in0_input -Date: September 2023 -KernelVersion: 6.5 +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy2_input +Date: February 2024 +KernelVersion: 6.8 Contact: intel-xe@lists.freedesktop.org -Description: RO. Current Voltage in millivolt. +Description: RO. Package energy input of device in microjoules. - Only supported for particular Intel xe graphics platforms. + Only supported for particular Intel Xe graphics platforms. -What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy1_input -Date: September 2023 -KernelVersion: 6.5 +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power2_max_interval +Date: February 2024 +KernelVersion: 6.8 Contact: intel-xe@lists.freedesktop.org -Description: RO. Energy input of device in microjoules. +Description: RW. Package sustained power limit interval (Tau in PL1/Tau) in + milliseconds over which sustained power is averaged. - Only supported for particular Intel xe graphics platforms. + Only supported for particular Intel Xe graphics platforms. -What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max_interval -Date: October 2023 -KernelVersion: 6.6 +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/in1_input +Date: February 2024 +KernelVersion: 6.8 Contact: intel-xe@lists.freedesktop.org -Description: RW. Sustained power limit interval (Tau in PL1/Tau) in - milliseconds over which sustained power is averaged. +Description: RO. Package current voltage in millivolt. - Only supported for particular Intel xe graphics platforms. + Only supported for particular Intel Xe graphics platforms. diff --git a/Documentation/ABI/testing/sysfs-driver-panfrost-profiling b/Documentation/ABI/testing/sysfs-driver-panfrost-profiling new file mode 100644 index 0000000000000..7597c420e54b4 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-panfrost-profiling @@ -0,0 +1,10 @@ +What: /sys/bus/platform/drivers/panfrost/.../profiling +Date: February 2024 +KernelVersion: 6.8.0 +Contact: Adrian Larumbe <adrian.larumbe@collabora.com> +Description: + Get/set drm fdinfo's engine and cycles profiling status. + Valid values are: + 0: Don't enable fdinfo job profiling sources. + 1: Enable fdinfo job profiling sources, this enables both the GPU's + timestamp and cycle counter registers. diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat index bbf329cf0d67b..96020fb051c34 100644 --- a/Documentation/ABI/testing/sysfs-driver-qat +++ b/Documentation/ABI/testing/sysfs-driver-qat @@ -141,3 +141,23 @@ Description: 64 This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat/auto_reset +Date: March 2024 +KernelVersion: 6.8 +Contact: qat-linux@intel.com +Description: (RW) Reports the current state of the autoreset feature + for a QAT device + + Write to the attribute to enable or disable device auto reset. + + Device auto reset is disabled by default. + + The values are: + + * 1/Yy/on: auto reset enabled. If the device encounters an + unrecoverable error, it will be reset automatically. + * 0/Nn/off: auto reset disabled. If the device encounters an + unrecoverable error, it will not be reset. + + This attribute is only available for qat_4xxx devices. diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-powercap b/Documentation/ABI/testing/sysfs-firmware-opal-powercap index c9b66ec4f165d..d2d12ee892880 100644 --- a/Documentation/ABI/testing/sysfs-firmware-opal-powercap +++ b/Documentation/ABI/testing/sysfs-firmware-opal-powercap @@ -1,6 +1,6 @@ What: /sys/firmware/opal/powercap Date: August 2017 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: Powercap directory for Powernv (P8, P9) servers Each folder in this directory contains a @@ -11,7 +11,7 @@ What: /sys/firmware/opal/powercap/system-powercap /sys/firmware/opal/powercap/system-powercap/powercap-max /sys/firmware/opal/powercap/system-powercap/powercap-current Date: August 2017 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: System powercap directory and attributes applicable for Powernv (P8, P9) servers diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-psr b/Documentation/ABI/testing/sysfs-firmware-opal-psr index cc2ece70e3657..1e55b56a0f897 100644 --- a/Documentation/ABI/testing/sysfs-firmware-opal-psr +++ b/Documentation/ABI/testing/sysfs-firmware-opal-psr @@ -1,6 +1,6 @@ What: /sys/firmware/opal/psr Date: August 2017 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: Power-Shift-Ratio directory for Powernv P9 servers Power-Shift-Ratio allows to provide hints the firmware @@ -10,7 +10,7 @@ Description: Power-Shift-Ratio directory for Powernv P9 servers What: /sys/firmware/opal/psr/cpu_to_gpu_X Date: August 2017 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: PSR sysfs attributes for Powernv P9 servers Power-Shift-Ratio between CPU and GPU for a given chip diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups b/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups index 3a2dfe542e8c5..fcb1fb4795b65 100644 --- a/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups +++ b/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups @@ -1,6 +1,6 @@ What: /sys/firmware/opal/sensor_groups Date: August 2017 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: Sensor groups directory for POWER9 powernv servers Each folder in this directory contains a sensor group @@ -11,7 +11,7 @@ Description: Sensor groups directory for POWER9 powernv servers What: /sys/firmware/opal/sensor_groups/<sensor_group_name>/clear Date: August 2017 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: Sysfs file to clear the min-max of all the sensors belonging to the group. diff --git a/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info b/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info index 141a6b3714694..f5cefb81ac9d5 100644 --- a/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info +++ b/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info @@ -1,6 +1,6 @@ What: /sys/firmware/papr/energy_scale_info Date: February 2022 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: Directory hosting a set of platform attributes like energy/frequency on Linux running as a PAPR guest. @@ -10,20 +10,20 @@ Description: Directory hosting a set of platform attributes like What: /sys/firmware/papr/energy_scale_info/<id> Date: February 2022 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: Energy, frequency attributes directory for POWERVM servers What: /sys/firmware/papr/energy_scale_info/<id>/desc Date: February 2022 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: String description of the energy attribute of <id> What: /sys/firmware/papr/energy_scale_info/<id>/value Date: February 2022 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: Numeric value of the energy attribute of <id> What: /sys/firmware/papr/energy_scale_info/<id>/value_desc Date: February 2022 -Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Contact: Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org> Description: String value of the energy attribute of <id> diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 99fa87a43926e..1a4d83953379e 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -205,7 +205,7 @@ Description: Controls the idle timing of system, if there is no FS operation What: /sys/fs/f2fs/<disk>/discard_idle_interval Date: September 2018 Contact: "Chao Yu" <yuchao0@huawei.com> -Contact: "Sahitya Tummala" <stummala@codeaurora.org> +Contact: "Sahitya Tummala" <quic_stummala@quicinc.com> Description: Controls the idle timing of discard thread given this time interval. Default is 5 secs. @@ -213,7 +213,7 @@ Description: Controls the idle timing of discard thread given What: /sys/fs/f2fs/<disk>/gc_idle_interval Date: September 2018 Contact: "Chao Yu" <yuchao0@huawei.com> -Contact: "Sahitya Tummala" <stummala@codeaurora.org> +Contact: "Sahitya Tummala" <quic_stummala@quicinc.com> Description: Controls the idle timing for gc path. Set to 5 seconds by default. What: /sys/fs/f2fs/<disk>/iostat_enable @@ -701,29 +701,31 @@ Description: Support configuring fault injection type, should be enabled with fault_injection option, fault type value is shown below, it supports single or combined type. - =================== =========== - Type_Name Type_Value - =================== =========== - FAULT_KMALLOC 0x000000001 - FAULT_KVMALLOC 0x000000002 - FAULT_PAGE_ALLOC 0x000000004 - FAULT_PAGE_GET 0x000000008 - FAULT_ALLOC_BIO 0x000000010 (obsolete) - FAULT_ALLOC_NID 0x000000020 - FAULT_ORPHAN 0x000000040 - FAULT_BLOCK 0x000000080 - FAULT_DIR_DEPTH 0x000000100 - FAULT_EVICT_INODE 0x000000200 - FAULT_TRUNCATE 0x000000400 - FAULT_READ_IO 0x000000800 - FAULT_CHECKPOINT 0x000001000 - FAULT_DISCARD 0x000002000 - FAULT_WRITE_IO 0x000004000 - FAULT_SLAB_ALLOC 0x000008000 - FAULT_DQUOT_INIT 0x000010000 - FAULT_LOCK_OP 0x000020000 - FAULT_BLKADDR 0x000040000 - =================== =========== + =========================== =========== + Type_Name Type_Value + =========================== =========== + FAULT_KMALLOC 0x000000001 + FAULT_KVMALLOC 0x000000002 + FAULT_PAGE_ALLOC 0x000000004 + FAULT_PAGE_GET 0x000000008 + FAULT_ALLOC_BIO 0x000000010 (obsolete) + FAULT_ALLOC_NID 0x000000020 + FAULT_ORPHAN 0x000000040 + FAULT_BLOCK 0x000000080 + FAULT_DIR_DEPTH 0x000000100 + FAULT_EVICT_INODE 0x000000200 + FAULT_TRUNCATE 0x000000400 + FAULT_READ_IO 0x000000800 + FAULT_CHECKPOINT 0x000001000 + FAULT_DISCARD 0x000002000 + FAULT_WRITE_IO 0x000004000 + FAULT_SLAB_ALLOC 0x000008000 + FAULT_DQUOT_INIT 0x000010000 + FAULT_LOCK_OP 0x000020000 + FAULT_BLKADDR_VALIDITY 0x000040000 + FAULT_BLKADDR_CONSISTENCE 0x000080000 + FAULT_NO_SEGMENT 0x000100000 + =========================== =========== What: /sys/fs/f2fs/<disk>/discard_io_aware_gran Date: January 2023 diff --git a/Documentation/ABI/testing/sysfs-fs-virtiofs b/Documentation/ABI/testing/sysfs-fs-virtiofs new file mode 100644 index 0000000000000..4839dbce997e4 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-fs-virtiofs @@ -0,0 +1,11 @@ +What: /sys/fs/virtiofs/<n>/tag +Date: Feb 2024 +Contact: virtio-fs@lists.linux.dev +Description: + [RO] The mount "tag" that can be used to mount this filesystem. + +What: /sys/fs/virtiofs/<n>/device +Date: Feb 2024 +Contact: virtio-fs@lists.linux.dev +Description: + Symlink to the virtio device that exports this filesystem. diff --git a/Documentation/ABI/testing/sysfs-kernel-fadump b/Documentation/ABI/testing/sysfs-kernel-fadump index 8f7a64a81783a..2f9daa7ca55be 100644 --- a/Documentation/ABI/testing/sysfs-kernel-fadump +++ b/Documentation/ABI/testing/sysfs-kernel-fadump @@ -38,3 +38,21 @@ Contact: linuxppc-dev@lists.ozlabs.org Description: read only Provide information about the amount of memory reserved by FADump to save the crash dump in bytes. + +What: /sys/kernel/fadump/hotplug_ready +Date: Apr 2024 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Kdump udev rule re-registers fadump on memory add/remove events, + primarily to update the elfcorehdr. This sysfs indicates the + kdump udev rule that fadump re-registration is not required on + memory add/remove events because elfcorehdr is now prepared in + the second/fadump kernel. +User: kexec-tools + +What: /sys/kernel/fadump/bootargs_append +Date: May 2024 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + This is a special sysfs file available to setup additional + parameters to be passed to capture kernel. diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-cma b/Documentation/ABI/testing/sysfs-kernel-mm-cma index 02b2bb60c2969..dfd755201142f 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-cma +++ b/Documentation/ABI/testing/sysfs-kernel-mm-cma @@ -23,3 +23,9 @@ Date: Feb 2021 Contact: Minchan Kim <minchan@kernel.org> Description: the number of pages CMA API failed to allocate + +What: /sys/kernel/mm/cma/<cma-heap-name>/release_pages_success +Date: Feb 2024 +Contact: Anshuman Khandual <anshuman.khandual@arm.com> +Description: + the number of pages CMA API succeeded to release diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-damon b/Documentation/ABI/testing/sysfs-kernel-mm-damon index bfa5b8288d8d1..cef6e1d20b185 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-damon +++ b/Documentation/ABI/testing/sysfs-kernel-mm-damon @@ -34,7 +34,9 @@ Description: Writing 'on' or 'off' to this file makes the kdamond starts or kdamond. Writing 'update_schemes_tried_bytes' to the file updates only '.../tried_regions/total_bytes' files of this kdamond. Writing 'clear_schemes_tried_regions' to the file - removes contents of the 'tried_regions' directory. + removes contents of the 'tried_regions' directory. Writing + 'update_schemes_effective_quotas' to the file updates + '.../quotas/effective_bytes' files of this kdamond. What: /sys/kernel/mm/damon/admin/kdamonds/<K>/pid Date: Mar 2022 @@ -208,6 +210,12 @@ Contact: SeongJae Park <sj@kernel.org> Description: Writing to and reading from this file sets and gets the size quota of the scheme in bytes. +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/effective_bytes +Date: Feb 2024 +Contact: SeongJae Park <sj@kernel.org> +Description: Reading from this file gets the effective size quota of the + scheme in bytes, which adjusted for the time quota and goals. + What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/reset_interval_ms Date: Mar 2022 Contact: SeongJae Park <sj@kernel.org> @@ -221,6 +229,12 @@ Description: Writing a number 'N' to this file creates the number of directories for setting automatic tuning of the scheme's aggressiveness named '0' to 'N-1' under the goals/ directory. +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/<G>/target_metric +Date: Feb 2024 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the quota + auto-tuning goal metric. + What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/<G>/target_value Date: Nov 2023 Contact: SeongJae Park <sj@kernel.org> @@ -300,9 +314,9 @@ Date: Dec 2022 Contact: SeongJae Park <sj@kernel.org> Description: Writing to and reading from this file sets and gets the type of the memory of the interest. 'anon' for anonymous pages, - 'memcg' for specific memory cgroup, 'addr' for address range - (an open-ended interval), or 'target' for DAMON monitoring - target can be written and read. + 'memcg' for specific memory cgroup, 'young' for young pages, + 'addr' for address range (an open-ended interval), or 'target' + for DAMON monitoring target can be written and read. What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/memcg_path Date: Dec 2022 diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy b/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy new file mode 100644 index 0000000000000..8ac327fd7fb6e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy @@ -0,0 +1,4 @@ +What: /sys/kernel/mm/mempolicy/ +Date: January 2024 +Contact: Linux memory management mailing list <linux-mm@kvack.org> +Description: Interface for Mempolicy diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave b/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave new file mode 100644 index 0000000000000..0b7972de04e93 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave @@ -0,0 +1,25 @@ +What: /sys/kernel/mm/mempolicy/weighted_interleave/ +Date: January 2024 +Contact: Linux memory management mailing list <linux-mm@kvack.org> +Description: Configuration Interface for the Weighted Interleave policy + +What: /sys/kernel/mm/mempolicy/weighted_interleave/nodeN +Date: January 2024 +Contact: Linux memory management mailing list <linux-mm@kvack.org> +Description: Weight configuration interface for nodeN + + The interleave weight for a memory node (N). These weights are + utilized by tasks which have set their mempolicy to + MPOL_WEIGHTED_INTERLEAVE. + + These weights only affect new allocations, and changes at runtime + will not cause migrations on already allocated pages. + + The minimum weight for a node is always 1. + + Minimum weight: 1 + Maximum weight: 255 + + Writing an empty string or `0` will reset the weight to the + system default. The system default may be set by the kernel + or drivers at boot or during hotplug events. diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-transparent-hugepage b/Documentation/ABI/testing/sysfs-kernel-mm-transparent-hugepage new file mode 100644 index 0000000000000..7bfbb9cc2c113 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-mm-transparent-hugepage @@ -0,0 +1,18 @@ +What: /sys/kernel/mm/transparent_hugepage/ +Date: April 2024 +Contact: Linux memory management mailing list <linux-mm@kvack.org> +Description: + /sys/kernel/mm/transparent_hugepage/ contains a number of files and + subdirectories, + + - defrag + - enabled + - hpage_pmd_size + - khugepaged + - shmem_enabled + - use_zero_page + - subdirectories of the form hugepages-<size>kB, where <size> + is the page size of the hugepages supported by the kernel/CPU + combination. + + See Documentation/admin-guide/mm/transhuge.rst for details. diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi index 8a7e25bde0853..28144371a0f1a 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-wmi +++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi @@ -126,6 +126,14 @@ Description: Change the mini-LED mode: * 0 - Single-zone, * 1 - Multi-zone + * 2 - Multi-zone strong (available on newer generation mini-led) + +What: /sys/devices/platform/<platform>/available_mini_led_mode +Date: Apr 2024 +KernelVersion: 6.10 +Contact: "Luke Jones" <luke@ljones.dev> +Description: + List the available mini-led modes. What: /sys/devices/platform/<platform>/ppt_pl1_spl Date: Jun 2023 @@ -186,3 +194,21 @@ Contact: "Luke Jones" <luke@ljones.dev> Description: Set the target temperature limit of the Nvidia dGPU: * min=75, max=87 + +What: /sys/devices/platform/<platform>/boot_sound +Date: Apr 2024 +KernelVersion: 6.10 +Contact: "Luke Jones" <luke@ljones.dev> +Description: + Set if the BIOS POST sound is played on boot. + * 0 - False, + * 1 - True + +What: /sys/devices/platform/<platform>/mcu_powersave +Date: Apr 2024 +KernelVersion: 6.10 +Contact: "Luke Jones" <luke@ljones.dev> +Description: + Set if the MCU can go in to low-power mode on system sleep + * 0 - False, + * 1 - True |