Merge tag 'pinctrl-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

 - A complicated IRQ fix for the MSM driver (see commit)

 - Fix the group/function check in the Ingenic driver

 - Deal with a possible NULL pointer dereference in the Madera driver

* tag 'pinctrl-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: madera: Fix possible NULL pointer with pdata config
  pinctrl: ingenic: Fix group & function error checking
  pinctrl: msm: Really mask level interrupts to prevent latching

3 files changed, 27 insertions, 3 deletions

diff --git a/drivers/pinctrl/cirrus/pinctrl-madera-core.c b/drivers/pinctrl/cirrus/pinctrl-madera-core.c
index ece41fb2848f20..c4f4d904e4a61e 100644
--- a/drivers/pinctrl/cirrus/pinctrl-madera-core.c
+++ b/drivers/pinctrl/cirrus/pinctrl-madera-core.c
@@ -1040,7 +1040,7 @@ static int madera_pin_probe(struct platform_device *pdev)
 	}
 
 	/* if the configuration is provided through pdata, apply it */
-	if (pdata) {
+	if (pdata && pdata->gpio_configs) {
 		ret = pinctrl_register_mappings(pdata->gpio_configs,
 						pdata->n_gpio_configs);
 		if (ret) {
diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 6a1b6058b99102..628817c40e3bbc 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -793,7 +793,7 @@ static int ingenic_pinctrl_probe(struct platform_device *pdev)
 
 		err = pinctrl_generic_add_group(jzpc->pctl, group->name,
 				group->pins, group->num_pins, group->data);
-		if (err) {
+		if (err < 0) {
 			dev_err(dev, "Failed to register group %s\n",
 					group->name);
 			return err;
@@ -806,7 +806,7 @@ static int ingenic_pinctrl_probe(struct platform_device *pdev)
 		err = pinmux_generic_add_function(jzpc->pctl, func->name,
 				func->group_names, func->num_group_names,
 				func->data);
-		if (err) {
+		if (err < 0) {
 			dev_err(dev, "Failed to register function %s\n",
 					func->name);
 			return err;
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 2155a30c282b24..5d72ffad32c299 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -634,6 +634,29 @@ static void msm_gpio_irq_mask(struct irq_data *d)
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
 	val = readl(pctrl->regs + g->intr_cfg_reg);
+	/*
+	 * There are two bits that control interrupt forwarding to the CPU. The
+	 * RAW_STATUS_EN bit causes the level or edge sensed on the line to be
+	 * latched into the interrupt status register when the hardware detects
+	 * an irq that it's configured for (either edge for edge type or level
+	 * for level type irq). The 'non-raw' status enable bit causes the
+	 * hardware to assert the summary interrupt to the CPU if the latched
+	 * status bit is set. There's a bug though, the edge detection logic
+	 * seems to have a problem where toggling the RAW_STATUS_EN bit may
+	 * cause the status bit to latch spuriously when there isn't any edge
+	 * so we can't touch that bit for edge type irqs and we have to keep
+	 * the bit set anyway so that edges are latched while the line is masked.
+	 *
+	 * To make matters more complicated, leaving the RAW_STATUS_EN bit
+	 * enabled all the time causes level interrupts to re-latch into the
+	 * status register because the level is still present on the line after
+	 * we ack it. We clear the raw status enable bit during mask here and
+	 * set the bit on unmask so the interrupt can't latch into the hardware
+	 * while it's masked.
+	 */
+	if (irqd_get_trigger_type(d) & IRQ_TYPE_LEVEL_MASK)
+		val &= ~BIT(g->intr_raw_status_bit);
+
 	val &= ~BIT(g->intr_enable_bit);
 	writel(val, pctrl->regs + g->intr_cfg_reg);
 
@@ -655,6 +678,7 @@ static void msm_gpio_irq_unmask(struct irq_data *d)
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
 	val = readl(pctrl->regs + g->intr_cfg_reg);
+	val |= BIT(g->intr_raw_status_bit);
 	val |= BIT(g->intr_enable_bit);
 	writel(val, pctrl->regs + g->intr_cfg_reg);