net: mvpp2: let phylink manage the carrier state

Net drivers using phylink shouldn't mess with the link carrier
themselves and should let phylink manage it. The mvpp2 driver wasn't
following this best practice as the mac_config() function made calls to
change the link carrier state. This led to wrongly reported carrier link
state which then triggered other issues. This patch fixes this
behaviour.

But the PPv2 driver relied on this misbehaviour in two cases: for fixed
links and when not using phylink (ACPI mode). The later was fixed by
adding an explicit call to link_up(), which when the ACPI mode will use
phylink should be removed.

The fixed link case was relying on the mac_config() function to set the
link up, as we found an issue in phylink_start() which assumes the
carrier is off. If not, the link_up() function is never called. To fix
this, a call to netif_carrier_off() is added just before phylink_start()
so that we do not introduce a regression in the driver.

Fixes: 4bb043262878 ("net: mvpp2: phylink support")
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 6 insertions, 15 deletions

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 28500417843ed3..702fec82d80636 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -58,6 +58,8 @@ static struct {
  */
 static void mvpp2_mac_config(struct net_device *dev, unsigned int mode,
 			     const struct phylink_link_state *state);
+static void mvpp2_mac_link_up(struct net_device *dev, unsigned int mode,
+			      phy_interface_t interface, struct phy_device *phy);
 
 /* Queue modes */
 #define MVPP2_QDIST_SINGLE_MODE	0
@@ -3142,6 +3144,7 @@ static void mvpp2_start_dev(struct mvpp2_port *port)
 		mvpp22_mode_reconfigure(port);
 
 	if (port->phylink) {
+		netif_carrier_off(port->dev);
 		phylink_start(port->phylink);
 	} else {
 		/* Phylink isn't used as of now for ACPI, so the MAC has to be
@@ -3150,9 +3153,10 @@ static void mvpp2_start_dev(struct mvpp2_port *port)
 		 */
 		struct phylink_link_state state = {
 			.interface = port->phy_interface,
-			.link = 1,
 		};
 		mvpp2_mac_config(port->dev, MLO_AN_INBAND, &state);
+		mvpp2_mac_link_up(port->dev, MLO_AN_INBAND, port->phy_interface,
+				  NULL);
 	}
 
 	netif_tx_start_all_queues(port->dev);
@@ -4495,10 +4499,6 @@ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode,
 		return;
 	}
 
-	netif_tx_stop_all_queues(port->dev);
-	if (!port->has_phy)
-		netif_carrier_off(port->dev);
-
 	/* Make sure the port is disabled when reconfiguring the mode */
 	mvpp2_port_disable(port);
 
@@ -4523,16 +4523,7 @@ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode,
 	if (port->priv->hw_version == MVPP21 && port->flags & MVPP2_F_LOOPBACK)
 		mvpp2_port_loopback_set(port, state);
 
-	/* If the port already was up, make sure it's still in the same state */
-	if (state->link || !port->has_phy) {
-		mvpp2_port_enable(port);
-
-		mvpp2_egress_enable(port);
-		mvpp2_ingress_enable(port);
-		if (!port->has_phy)
-			netif_carrier_on(dev);
-		netif_tx_wake_all_queues(dev);
-	}
+	mvpp2_port_enable(port);
 }
 
 static void mvpp2_mac_link_up(struct net_device *dev, unsigned int mode,