Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git

16 files changed, 86 insertions, 109 deletions

diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index ffb39196757348..e341b337248203 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -7477,8 +7477,8 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
 			return ASC_ERROR;
 		}
 
-		asc_sg_head = kzalloc(sizeof(asc_scsi_q->sg_head) +
-			use_sg * sizeof(struct asc_sg_list), GFP_ATOMIC);
+		asc_sg_head = kzalloc(struct_size(asc_sg_head, sg_list, use_sg),
+				      GFP_ATOMIC);
 		if (!asc_sg_head) {
 			scsi_dma_unmap(scp);
 			set_host_byte(scp, DID_SOFT_ERROR);
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h
index 35ec24f28d2c2d..679a4fd138746e 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.h
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.h
@@ -196,7 +196,7 @@ int	ahd_dmamap_unload(struct ahd_softc *, bus_dma_tag_t, bus_dmamap_t);
 /*
  * XXX
  * ahd_dmamap_sync is only used on buffers allocated with
- * the pci_alloc_consistent() API.  Although I'm not sure how
+ * the dma_alloc_coherent() API.  Although I'm not sure how
  * this works on architectures with a write buffer, Linux does
  * not have an API to sync "coherent" memory.  Perhaps we need
  * to do an mb()?
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.h b/drivers/scsi/aic7xxx/aic7xxx_osm.h
index 53240f53b65469..4782a304e93cc4 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.h
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.h
@@ -209,7 +209,7 @@ int	ahc_dmamap_unload(struct ahc_softc *, bus_dma_tag_t, bus_dmamap_t);
 /*
  * XXX
  * ahc_dmamap_sync is only used on buffers allocated with
- * the pci_alloc_consistent() API.  Although I'm not sure how
+ * the dma_alloc_coherent() API.  Although I'm not sure how
  * this works on architectures with a write buffer, Linux does
  * not have an API to sync "coherent" memory.  Perhaps we need
  * to do an mb()?
diff --git a/drivers/scsi/elx/efct/efct_driver.c b/drivers/scsi/elx/efct/efct_driver.c
index eab68fd9337ac1..b2b61bc45f1275 100644
--- a/drivers/scsi/elx/efct/efct_driver.c
+++ b/drivers/scsi/elx/efct/efct_driver.c
@@ -541,11 +541,9 @@ efct_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_drvdata(pdev, efct);
 
-	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0 ||
-	    pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
+	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)) != 0) {
 		dev_warn(&pdev->dev, "trying DMA_BIT_MASK(32)\n");
-		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0 ||
-		    pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
+		if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)) != 0) {
 			dev_err(&pdev->dev, "setting DMA_BIT_MASK failed\n");
 			rc = -1;
 			goto dma_mask_out;
diff --git a/drivers/scsi/elx/efct/efct_lio.c b/drivers/scsi/elx/efct/efct_lio.c
index 4d73e92909ab4f..8b004a5818d6b0 100644
--- a/drivers/scsi/elx/efct/efct_lio.c
+++ b/drivers/scsi/elx/efct/efct_lio.c
@@ -382,7 +382,7 @@ efct_lio_sg_map(struct efct_io *io)
 	struct efct_scsi_tgt_io *ocp = &io->tgt_io;
 	struct se_cmd *cmd = &ocp->cmd;
 
-	ocp->seg_map_cnt = pci_map_sg(io->efct->pci, cmd->t_data_sg,
+	ocp->seg_map_cnt = dma_map_sg(&io->efct->pci->dev, cmd->t_data_sg,
 				      cmd->t_data_nents, cmd->data_direction);
 	if (ocp->seg_map_cnt == 0)
 		return -EFAULT;
@@ -398,7 +398,7 @@ efct_lio_sg_unmap(struct efct_io *io)
 	if (WARN_ON(!ocp->seg_map_cnt || !cmd->t_data_sg))
 		return;
 
-	pci_unmap_sg(io->efct->pci, cmd->t_data_sg,
+	dma_unmap_sg(&io->efct->pci->dev, cmd->t_data_sg,
 		     ocp->seg_map_cnt, cmd->data_direction);
 	ocp->seg_map_cnt = 0;
 }
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 7359505e604194..6ec42991d2abb2 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -673,6 +673,10 @@ struct lpfc_register {
 #define lpfc_sliport_status_rdy_SHIFT	23
 #define lpfc_sliport_status_rdy_MASK	0x1
 #define lpfc_sliport_status_rdy_WORD	word0
+#define lpfc_sliport_status_pldv_SHIFT	0
+#define lpfc_sliport_status_pldv_MASK	0x1
+#define lpfc_sliport_status_pldv_WORD	word0
+#define CFG_PLD				0x3C
 #define MAX_IF_TYPE_2_RESETS		6
 
 #define LPFC_CTL_PORT_CTL_OFFSET	0x408
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 8d5537ec0f30d5..b7de66f89b3b54 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -68,6 +68,7 @@
 static enum cpuhp_state lpfc_cpuhp_state;
 /* Used when mapping IRQ vectors in a driver centric manner */
 static uint32_t lpfc_present_cpu;
+static bool lpfc_pldv_detect;
 
 static void __lpfc_cpuhp_remove(struct lpfc_hba *phba);
 static void lpfc_cpuhp_remove(struct lpfc_hba *phba);
@@ -6564,7 +6565,7 @@ lpfc_sli4_perform_vport_cvl(struct lpfc_vport *vport)
 		/* Cannot find existing Fabric ndlp, so allocate a new one */
 		ndlp = lpfc_nlp_init(vport, Fabric_DID);
 		if (!ndlp)
-			return 0;
+			return NULL;
 		/* Set the node type */
 		ndlp->nlp_type |= NLP_FABRIC;
 		/* Put ndlp onto node list */
@@ -9359,7 +9360,15 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba)
 					phba->work_status[0],
 					phba->work_status[1]);
 				port_error = -ENODEV;
+				break;
 			}
+
+			if (lpfc_pldv_detect &&
+			    bf_get(lpfc_sli_intf_sli_family,
+				   &phba->sli4_hba.sli_intf) ==
+					LPFC_SLI_INTF_FAMILY_G6)
+				pci_write_config_byte(phba->pcidev,
+						      LPFC_SLI_INTF, CFG_PLD);
 			break;
 		case LPFC_SLI_INTF_IF_TYPE_1:
 		default:
@@ -11567,6 +11576,9 @@ wait:
 			goto out;
 		}
 
+		if (bf_get(lpfc_sliport_status_pldv, &reg_data))
+			lpfc_pldv_detect = true;
+
 		if (!port_reset) {
 			/*
 			 * Reset the port now
@@ -15560,6 +15572,8 @@ lpfc_init(void)
 	/* Initialize in case vector mapping is needed */
 	lpfc_present_cpu = num_present_cpus();
 
+	lpfc_pldv_detect = false;
+
 	error = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
 					"lpfc/sli4:online",
 					lpfc_cpu_online, lpfc_cpu_offline);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 27ea8f552ede9b..83ad03d22a490f 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -894,7 +894,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
 	bpl += 2;
 	if (scsi_sg_count(scsi_cmnd)) {
 		/*
-		 * The driver stores the segment count returned from pci_map_sg
+		 * The driver stores the segment count returned from dma_map_sg
 		 * because this a count of dma-mappings used to map the use_sg
 		 * pages.  They are not guaranteed to be the same for those
 		 * architectures that implement an IOMMU.
@@ -2589,7 +2589,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
 	bpl += 2;
 	if (scsi_sg_count(scsi_cmnd)) {
 		/*
-		 * The driver stores the segment count returned from pci_map_sg
+		 * The driver stores the segment count returned from dma_map_sg
 		 * because this a count of dma-mappings used to map the use_sg
 		 * pages.  They are not guaranteed to be the same for those
 		 * architectures that implement an IOMMU.
@@ -3249,7 +3249,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
 	 */
 	if (scsi_sg_count(scsi_cmnd)) {
 		/*
-		 * The driver stores the segment count returned from pci_map_sg
+		 * The driver stores the segment count returned from dma_map_sg
 		 * because this a count of dma-mappings used to map the use_sg
 		 * pages.  They are not guaranteed to be the same for those
 		 * architectures that implement an IOMMU.
@@ -3488,7 +3488,7 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
 	 */
 	if (scsi_sg_count(scsi_cmnd)) {
 		/*
-		 * The driver stores the segment count returned from pci_map_sg
+		 * The driver stores the segment count returned from dma_map_sg
 		 * because this a count of dma-mappings used to map the use_sg
 		 * pages.  They are not guaranteed to be the same for those
 		 * architectures that implement an IOMMU.
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 33fd9a01330ce4..2afa19ba7f4309 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2027,8 +2027,15 @@ scsi_mode_select(struct scsi_device *sdev, int pf, int sp, int modepage,
 	memset(cmd, 0, sizeof(cmd));
 	cmd[1] = (pf ? 0x10 : 0) | (sp ? 0x01 : 0);
 
-	if (sdev->use_10_for_ms) {
-		if (len > 65535)
+	/*
+	 * Use MODE SELECT(10) if the device asked for it or if the mode page
+	 * and the mode select header cannot fit within the maximumm 255 bytes
+	 * of the MODE SELECT(6) command.
+	 */
+	if (sdev->use_10_for_ms ||
+	    len + 4 > 255 ||
+	    data->block_descriptor_length > 255) {
+		if (len > 65535 - 8)
 			return -EINVAL;
 		real_buffer = kmalloc(8 + len, GFP_KERNEL);
 		if (!real_buffer)
@@ -2041,15 +2048,13 @@ scsi_mode_select(struct scsi_device *sdev, int pf, int sp, int modepage,
 		real_buffer[3] = data->device_specific;
 		real_buffer[4] = data->longlba ? 0x01 : 0;
 		real_buffer[5] = 0;
-		real_buffer[6] = data->block_descriptor_length >> 8;
-		real_buffer[7] = data->block_descriptor_length;
+		put_unaligned_be16(data->block_descriptor_length,
+				   &real_buffer[6]);
 
 		cmd[0] = MODE_SELECT_10;
-		cmd[7] = len >> 8;
-		cmd[8] = len;
+		put_unaligned_be16(len, &cmd[7]);
 	} else {
-		if (len > 255 || data->block_descriptor_length > 255 ||
-		    data->longlba)
+		if (data->longlba)
 			return -EINVAL;
 
 		real_buffer = kmalloc(4 + len, GFP_KERNEL);
@@ -2076,7 +2081,7 @@ EXPORT_SYMBOL_GPL(scsi_mode_select);
 /**
  *	scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary.
  *	@sdev:	SCSI device to be queried
- *	@dbd:	set if mode sense will allow block descriptors to be returned
+ *	@dbd:	set to prevent mode sense from returning block descriptors
  *	@modepage: mode page being requested
  *	@buffer: request buffer (may not be smaller than eight bytes)
  *	@len:	length of request buffer.
@@ -2111,18 +2116,18 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
 		sshdr = &my_sshdr;
 
  retry:
-	use_10_for_ms = sdev->use_10_for_ms;
+	use_10_for_ms = sdev->use_10_for_ms || len > 255;
 
 	if (use_10_for_ms) {
-		if (len < 8)
-			len = 8;
+		if (len < 8 || len > 65535)
+			return -EINVAL;
 
 		cmd[0] = MODE_SENSE_10;
-		cmd[8] = len;
+		put_unaligned_be16(len, &cmd[7]);
 		header_length = 8;
 	} else {
 		if (len < 4)
-			len = 4;
+			return -EINVAL;
 
 		cmd[0] = MODE_SENSE;
 		cmd[4] = len;
@@ -2146,9 +2151,15 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
 			if ((sshdr->sense_key == ILLEGAL_REQUEST) &&
 			    (sshdr->asc == 0x20) && (sshdr->ascq == 0)) {
 				/*
-				 * Invalid command operation code
+				 * Invalid command operation code: retry using
+				 * MODE SENSE(6) if this was a MODE SENSE(10)
+				 * request, except if the request mode page is
+				 * too large for MODE SENSE single byte
+				 * allocation length field.
 				 */
 				if (use_10_for_ms) {
+					if (len > 255)
+						return -EIO;
 					sdev->use_10_for_ms = 0;
 					goto retry;
 				}
@@ -2172,12 +2183,11 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
 		data->longlba = 0;
 		data->block_descriptor_length = 0;
 	} else if (use_10_for_ms) {
-		data->length = buffer[0]*256 + buffer[1] + 2;
+		data->length = get_unaligned_be16(&buffer[0]) + 2;
 		data->medium_type = buffer[2];
 		data->device_specific = buffer[3];
 		data->longlba = buffer[4] & 0x01;
-		data->block_descriptor_length = buffer[6]*256
-			+ buffer[7];
+		data->block_descriptor_length = get_unaligned_be16(&buffer[6]);
 	} else {
 		data->length = buffer[0] + 1;
 		data->medium_type = buffer[1];
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index fe22191522a3b9..0d0381df25f72b 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1902,60 +1902,3 @@ void scsi_forget_host(struct Scsi_Host *shost)
 	spin_unlock_irqrestore(shost->host_lock, flags);
 }
 
-/**
- * scsi_get_host_dev - Create a scsi_device that points to the host adapter itself
- * @shost: Host that needs a scsi_device
- *
- * Lock status: None assumed.
- *
- * Returns:     The scsi_device or NULL
- *
- * Notes:
- *	Attach a single scsi_device to the Scsi_Host - this should
- *	be made to look like a "pseudo-device" that points to the
- *	HA itself.
- *
- *	Note - this device is not accessible from any high-level
- *	drivers (including generics), which is probably not
- *	optimal.  We can add hooks later to attach.
- */
-struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost)
-{
-	struct scsi_device *sdev = NULL;
-	struct scsi_target *starget;
-
-	mutex_lock(&shost->scan_mutex);
-	if (!scsi_host_scan_allowed(shost))
-		goto out;
-	starget = scsi_alloc_target(&shost->shost_gendev, 0, shost->this_id);
-	if (!starget)
-		goto out;
-
-	sdev = scsi_alloc_sdev(starget, 0, NULL);
-	if (sdev)
-		sdev->borken = 0;
-	else
-		scsi_target_reap(starget);
-	put_device(&starget->dev);
- out:
-	mutex_unlock(&shost->scan_mutex);
-	return sdev;
-}
-EXPORT_SYMBOL(scsi_get_host_dev);
-
-/**
- * scsi_free_host_dev - Free a scsi_device that points to the host adapter itself
- * @sdev: Host device to be freed
- *
- * Lock status: None assumed.
- *
- * Returns:     Nothing
- */
-void scsi_free_host_dev(struct scsi_device *sdev)
-{
-	BUG_ON(sdev->id != sdev->host->this_id);
-
-	__scsi_remove_device(sdev);
-}
-EXPORT_SYMBOL(scsi_free_host_dev);
-
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index d8f6add416c0aa..a646d27df681ef 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2608,6 +2608,13 @@ sd_do_mode_sense(struct scsi_disk *sdkp, int dbd, int modepage,
 		 unsigned char *buffer, int len, struct scsi_mode_data *data,
 		 struct scsi_sense_hdr *sshdr)
 {
+	/*
+	 * If we must use MODE SENSE(10), make sure that the buffer length
+	 * is at least 8 bytes so that the mode sense header fits.
+	 */
+	if (sdkp->device->use_10_for_ms && len < 8)
+		len = 8;
+
 	return scsi_mode_sense(sdkp->device, dbd, modepage, buffer, len,
 			       SD_TIMEOUT, sdkp->max_retries, data,
 			       sshdr);
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 565e8aa6319d42..b2521b830be72f 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -165,14 +165,14 @@ config SCSI_UFS_BSG
 	  If unsure, say N.
 
 config SCSI_UFS_EXYNOS
-	tristate "EXYNOS specific hooks to UFS controller platform driver"
+	tristate "Exynos specific hooks to UFS controller platform driver"
 	depends on SCSI_UFSHCD_PLATFORM && (ARCH_EXYNOS || COMPILE_TEST)
 	help
-	  This selects the EXYNOS specific additions to UFSHCD platform driver.
-	  UFS host on EXYNOS includes HCI and UNIPRO layer, and associates with
-	  UFS-PHY driver.
+	  This selects the Samsung Exynos SoC specific additions to UFSHCD
+	  platform driver.  UFS host on Samsung Exynos SoC includes HCI and
+	  UNIPRO layer, and associates with UFS-PHY driver.
 
-	  Select this if you have UFS host controller on EXYNOS chipset.
+	  Select this if you have UFS host controller on Samsung Exynos SoC.
 	  If unsure, say N.
 
 config SCSI_UFS_CRYPTO
@@ -202,7 +202,7 @@ config SCSI_UFS_FAULT_INJECTION
 
 config SCSI_UFS_HWMON
 	bool "UFS  Temperature Notification"
-	depends on SCSI_UFSHCD && HWMON
+	depends on SCSI_UFSHCD=HWMON || HWMON=y
 	help
 	  This provides support for UFS hardware monitoring. If enabled,
 	  a hardware monitoring device will be created for the UFS device.
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 92d4c61fc9d0a4..92f5bb4965faaa 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -1212,24 +1212,34 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
 	int err = 0;
 
 	if (status == PRE_CHANGE) {
+		err = ufshcd_uic_hibern8_enter(hba);
+		if (err)
+			return err;
 		if (scale_up)
 			err = ufs_qcom_clk_scale_up_pre_change(hba);
 		else
 			err = ufs_qcom_clk_scale_down_pre_change(hba);
+		if (err)
+			ufshcd_uic_hibern8_exit(hba);
+
 	} else {
 		if (scale_up)
 			err = ufs_qcom_clk_scale_up_post_change(hba);
 		else
 			err = ufs_qcom_clk_scale_down_post_change(hba);
 
-		if (err || !dev_req_params)
+
+		if (err || !dev_req_params) {
+			ufshcd_uic_hibern8_exit(hba);
 			goto out;
+		}
 
 		ufs_qcom_cfg_timers(hba,
 				    dev_req_params->gear_rx,
 				    dev_req_params->pwr_rx,
 				    dev_req_params->hs_rate,
 				    false);
+		ufshcd_uic_hibern8_exit(hba);
 	}
 
 out:
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 5dbf2d7458e806..392f7f473c1a9f 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -225,7 +225,6 @@ static void ufshcd_hba_exit(struct ufs_hba *hba);
 static int ufshcd_clear_ua_wluns(struct ufs_hba *hba);
 static int ufshcd_probe_hba(struct ufs_hba *hba, bool async);
 static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
-static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
 static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
 static int ufshcd_host_reset_and_restore(struct ufs_hba *hba);
 static void ufshcd_resume_clkscaling(struct ufs_hba *hba);
@@ -4085,7 +4084,7 @@ int ufshcd_link_recovery(struct ufs_hba *hba)
 }
 EXPORT_SYMBOL_GPL(ufshcd_link_recovery);
 
-static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
+int ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
 {
 	int ret;
 	struct uic_command uic_cmd = {0};
@@ -4107,6 +4106,7 @@ static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufshcd_uic_hibern8_enter);
 
 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba)
 {
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 05ba64b9ddab34..07afb377104afd 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -1016,6 +1016,7 @@ int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int);
 int ufshcd_link_recovery(struct ufs_hba *hba);
 int ufshcd_make_hba_operational(struct ufs_hba *hba);
 void ufshcd_remove(struct ufs_hba *);
+int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
 void ufshcd_delay_us(unsigned long us, unsigned long tolerance);
 int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 75363707b73f9c..bc9c45ced1458e 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -798,16 +798,6 @@ void scsi_host_busy_iter(struct Scsi_Host *,
 struct class_container;
 
 /*
- * These two functions are used to allocate and free a pseudo device
- * which will connect to the host adapter itself rather than any
- * physical device.  You must deallocate when you are done with the
- * thing.  This physical pseudo-device isn't real and won't be available
- * from any high-level drivers.
- */
-extern void scsi_free_host_dev(struct scsi_device *);
-extern struct scsi_device *scsi_get_host_dev(struct Scsi_Host *);
-
-/*
  * DIF defines the exchange of protection information between
  * initiator and SBC block device.
  *