diff options
| -rw-r--r-- | arch/arm/Kconfig.debug | 2 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/mainstone.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/Kconfig | 2 |
4 files changed, 4 insertions, 3 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 5d3acff8c596e0..d22f38b957db9c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -101,7 +101,7 @@ config DEBUG_S3C2410_UART help Choice for UART for kernel low-level using S3C2410 UARTS, should be between zero and two. The port must have been - initalised by the boot-loader before use. + initialised by the boot-loader before use. The uncompressor code port configuration is now handled by CONFIG_S3C2410_LOWLEVEL_UART_PORT. diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 2a39f9e481ad2d..3b23f43cb1609f 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -141,7 +141,7 @@ config IXP4XX_INDIRECT_PCI 2) If > 64MB of memory space is required, the IXP4xx can be configured to use indirect registers to access PCI This allows for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. - The disadvantadge of this is that every PCI access requires + The disadvantage of this is that every PCI access requires three local register accesses plus a spinlock, but in some cases the performance hit is acceptable. In addition, you cannot mmap() PCI devices in this case due to the indirect nature diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 02e188d98e7d6d..b307f11951dfa9 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -493,6 +493,7 @@ static void __init mainstone_map_io(void) MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") /* Maintainer: MontaVista Software Inc. */ .phys_io = 0x40000000, + .boot_params = 0xa0000100, /* BLOB boot parameter setting */ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = mainstone_map_io, .init_irq = mainstone_init_irq, diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index ce7d81000695e3..970f98dadffc19 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -170,7 +170,7 @@ config S3C2410_PM_DEBUG depends on ARCH_S3C2410 && PM help Say Y here if you want verbose debugging from the PM Suspend and - Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt` + Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> for more information. config S3C2410_PM_CHECK |