Age | Commit message (Expand) | Author | Files | Lines |
2018-08-09 | xhci: use port structures instead of port arrays in xhci.c functions | Mathias Nyman | 1 | -28/+22 |
2018-08-09 | xhci: change xhci_test_and_clear_bit() to use new port structure | Mathias Nyman | 3 | -26/+15 |
2018-08-09 | xhci: change xhci_set_link_state() to work with port structures | Mathias Nyman | 3 | -22/+19 |
2018-08-09 | xhci: rename faked_port_index to hcd_portnum | Mathias Nyman | 1 | -22/+19 |
2018-08-09 | xhci: xhci-ring: use port structures for port event handler | Mathias Nyman | 1 | -71/+8 |
2018-08-09 | xhci: xhci-hub: use new port structures for cas and wake mask functions. | Mathias Nyman | 1 | -11/+10 |
2018-08-09 | xhci: xhci-hub: use new port structures to get port address instead of port a... | Mathias Nyman | 1 | -62/+78 |
2018-08-09 | xhci: Add helper to get xhci roothub from hcd | Mathias Nyman | 2 | -0/+11 |
2018-08-09 | xhci: set hcd pointers for xhci usb2 and usb3 roothub structures | Mathias Nyman | 1 | -0/+2 |
2018-08-09 | xhci: Create new structures to store xhci port information | Mathias Nyman | 2 | -6/+73 |
2018-08-09 | PCI: rcar: Remove IRQ mappings in rcar_pcie_enable_msi() failpath | Marek Vasut | 1 | -9/+16 |
2018-08-09 | PCI: rcar: Teardown MSI setup if rcar_pcie_enable() fails | Marek Vasut | 1 | -1/+27 |
2018-08-09 | PCI: rcar: Add missing irq_dispose_mapping() into failpath | Marek Vasut | 1 | -3/+14 |
2018-08-09 | PCI: rcar: Pull bus clock enable/disable from rcar_pcie_get_resources() | Marek Vasut | 1 | -17/+16 |
2018-08-09 | PCI: rcar: Poll more often in rcar_pcie_wait_for_dl() | Marek Vasut | 1 | -2/+3 |
2018-08-09 | PCI: rcar: Reuse generic pci_parse_request_of_pci_ranges() function | Vladimir Zapolskiy | 1 | -41/+1 |
2018-08-09 | DT: pci: rcar-pci: document R8A77980 bindings | Sergei Shtylyov | 1 | -0/+1 |
2018-08-09 | PCI: rcar: Factor out rcar_pcie_hw_init() call | Sergei Shtylyov | 1 | -20/+22 |
2018-08-09 | PCI: rcar: Add R-Car gen3 PHY support | Sergei Shtylyov | 2 | -2/+30 |
2018-08-09 | PCI: rcar: Remove PHYRDY polling from rcar_pcie_hw_init_h1() | Sergei Shtylyov | 1 | -11/+1 |
2018-08-09 | PCI: rcar: Poll PHYRDY in rcar_pcie_hw_init() | Sergei Shtylyov | 1 | -0/+20 |
2018-08-09 | PCI: rcar: Clean up the macros | Marek Vasut | 1 | -26/+27 |
2018-08-09 | PCI: rcar: Use runtime PM to control controller clock | Dien Pham | 1 | -26/+12 |
2018-08-09 | ARM: shmobile: defconfig: Enable RENESAS_WDT_GEN | Fabrizio Castro | 1 | -0/+1 |
2018-08-09 | ARM: dts: r8a7740: Add CEU1 | Simon Horman | 1 | -0/+9 |
2018-08-09 | ARM: dts: r8a7740: Add CEU0 | Jacopo Mondi | 1 | -0/+9 |
2018-08-09 | dt-bindings: arm: document Renesas V3HSK board bindings | Sergei Shtylyov | 1 | -0/+2 |
2018-08-09 | ARM: dts: r8a7745: Add PMU device node | Geert Uytterhoeven | 1 | -0/+7 |
2018-08-09 | ARM: dts: r8a7743: Add PMU device node | Geert Uytterhoeven | 1 | -0/+7 |
2018-08-09 | ARM: dts: r8a7794: Add PMU device node | Geert Uytterhoeven | 1 | -0/+7 |
2018-08-09 | ARM: dts: r8a7793: Add PMU device node | Geert Uytterhoeven | 1 | -0/+7 |
2018-08-09 | ARM: dts: r8a7792: Add PMU device node | Geert Uytterhoeven | 1 | -0/+7 |
2018-08-09 | ARM: dts: r8a7791: Add PMU device node | Geert Uytterhoeven | 1 | -0/+7 |
2018-08-09 | ARM: dts: r8a7790: Add PMU device nodes | Geert Uytterhoeven | 1 | -0/+18 |
2018-08-09 | ARM: dts: r7s72100: Add PMU device node | Geert Uytterhoeven | 1 | -0/+5 |
2018-08-09 | ARM: dts: r7s72100: Correct RTC interrupt types | Geert Uytterhoeven | 1 | -3/+3 |
2018-08-09 | ARM: dts: r7s72100: Correct watchdog timer interrupt type | Geert Uytterhoeven | 1 | -1/+1 |
2018-08-09 | ARM: dts: r8a73a4: Correct mask for GIC PPI interrupts | Geert Uytterhoeven | 1 | -5/+5 |
2018-08-09 | ARM: dts: r8a7790: Correct mask for GIC PPI interrupts | Geert Uytterhoeven | 1 | -5/+5 |
2018-08-09 | ARM: shmobile: r8a7794: alt: add EEPROM to DTS | Wolfram Sang | 1 | -0/+6 |
2018-08-09 | ARM: shmobile: Convert file to use cntvoff | Mylène Josserand | 3 | -23/+3 |
2018-08-09 | ARM: dts: kzm9d: Drop unnecessary address properties from gpio_keys node | Simon Horman | 1 | -3/+0 |
2018-08-09 | ARM: dts: silk: Drop unnecessary address properties from vin port node | Simon Horman | 1 | -3/+0 |
2018-08-09 | ARM: dts: alt: Drop unnecessary address properties from vin port node | Simon Horman | 1 | -3/+0 |
2018-08-09 | ARM: dts: koelsch: Drop unnecessary address properties from port nodes | Simon Horman | 1 | -6/+0 |
2018-08-09 | ARM: dts: gose: Drop unnecessary address properties from port nodes | Simon Horman | 1 | -6/+0 |
2018-08-09 | ARM: dts: porter: Drop unnecessary address properties from vin port node | Simon Horman | 1 | -3/+0 |
2018-08-09 | ARM: dts: lager: Drop unnecessary address properties from port node | Simon Horman | 1 | -3/+0 |
2018-08-09 | dt-bindings: arm: consistently name r8a77965 as M3-N | Simon Horman | 1 | -1/+1 |
2018-08-09 | ARM: dts: r8a7790: Fix sort order of VSP1/FDP1 nodes | Kieran Bingham | 1 | -9/+9 |
2018-08-09 | ARM: dts: iwg23s-sbc: Add EtherAVB support | Biju Das | 1 | -1/+14 |
2018-08-09 | ARM: dts: r8a77470: Add EtherAVB support | Biju Das | 1 | -0/+13 |
2018-08-09 | ARM: dts: renesas: r8a7790: Add FDP1 instances | Laurent Pinchart | 1 | -0/+27 |
2018-08-09 | ARM: dts: r8a77470: Add SCIF DMA support | Biju Das | 1 | -0/+18 |
2018-08-09 | ARM: dts: r8a77470: Add SCIF support | Biju Das | 1 | -2/+67 |
2018-08-09 | ARM: dts: silk: Enable watchdog support | Geert Uytterhoeven | 1 | -0/+5 |
2018-08-09 | ARM: dts: alt: Enable watchdog support | Geert Uytterhoeven | 1 | -0/+5 |
2018-08-09 | ARM: dts: gose: Enable watchdog support | Geert Uytterhoeven | 1 | -0/+5 |
2018-08-09 | ARM: dts: wheat: Enable watchdog support | Geert Uytterhoeven | 1 | -0/+5 |
2018-08-09 | ARM: dts: blanche: Enable watchdog support | Geert Uytterhoeven | 1 | -0/+5 |
2018-08-09 | ARM: dts: porter: Enable watchdog support | Geert Uytterhoeven | 1 | -0/+5 |
2018-08-09 | ARM: dts: koelsch: Enable watchdog support | Geert Uytterhoeven | 1 | -0/+5 |
2018-08-09 | ARM: dts: lager: Enable watchdog support | Geert Uytterhoeven | 1 | -0/+5 |
2018-08-09 | ARM: dts: r8a7793: Add RWDT node | Geert Uytterhoeven | 1 | -0/+10 |
2018-08-09 | ARM: dts: r8a7792: Add RWDT node | Geert Uytterhoeven | 1 | -0/+10 |
2018-08-09 | ARM: dts: iwg22m: Add watchdog support to SoM dtsi | Fabrizio Castro | 1 | -0/+5 |
2018-08-09 | ARM: dts: iwg20m: Add watchdog support to SoM dtsi | Fabrizio Castro | 1 | -0/+5 |
2018-08-09 | ARM: dts: r8a7794: Add watchdog support to SoC dtsi | Fabrizio Castro | 1 | -0/+10 |
2018-08-09 | ARM: dts: r8a7791: Add watchdog support to SoC dtsi | Fabrizio Castro | 1 | -0/+10 |
2018-08-09 | ARM: dts: r8a7790: Add watchdog support to SoC dtsi | Fabrizio Castro | 1 | -0/+10 |
2018-08-09 | ARM: dts: r8a7745: Add watchdog support to SoC dtsi | Fabrizio Castro | 1 | -0/+10 |
2018-08-09 | ARM: dts: r8a7743: Add watchdog support to SoC dtsi | Fabrizio Castro | 1 | -0/+10 |
2018-08-09 | ARM: dts: r8a7794: Adjust SMP routine size | Fabrizio Castro | 1 | -1/+1 |
2018-08-09 | ARM: dts: r8a7793: Adjust SMP routine size | Fabrizio Castro | 1 | -1/+1 |
2018-08-09 | ARM: dts: r8a7792: Adjust SMP routine size | Fabrizio Castro | 1 | -1/+1 |
2018-08-09 | ARM: dts: r8a7791: Adjust SMP routine size | Fabrizio Castro | 1 | -1/+1 |
2018-08-09 | ARM: dts: r8a7790: Adjust SMP routine size | Fabrizio Castro | 1 | -1/+1 |
2018-08-09 | ARM: dts: r8a7745: Adjust SMP routine size | Fabrizio Castro | 1 | -1/+1 |
2018-08-09 | ARM: dts: r8a7743: Adjust SMP routine size | Fabrizio Castro | 1 | -1/+1 |
2018-08-09 | ARM: dts: r7s72100: Add Capture Engine Unit (CEU) | Jacopo Mondi | 1 | -3/+12 |
2018-08-09 | ARM: dts: r8a77470: Add IRQC support | Biju Das | 1 | -0/+20 |
2018-08-09 | ARM: dts: r8a77470: Add SYS-DMAC support | Biju Das | 1 | -0/+66 |
2018-08-09 | ARM: dts: renesas: r8a7794: Add FDP1 instances | Laurent Pinchart | 1 | -0/+9 |
2018-08-09 | ARM: dts: renesas: r8a7793: Add FDP1 instances | Laurent Pinchart | 1 | -0/+18 |
2018-08-09 | ARM: dts: renesas: r8a7791: Add FDP1 instances | Laurent Pinchart | 1 | -0/+18 |
2018-08-09 | ARM: shmobile: defconfig: Disable CONFIG_FB_SH_MOBILE_MERAM | Geert Uytterhoeven | 1 | -1/+0 |
2018-08-09 | arm: shmobile: Add the RZ/N1D (R9A06G032) to the shmobile Kconfig | Michel Pollet | 1 | -0/+4 |
2018-08-09 | ARM: dts: renesas: replace toshiba, mmc-wrprotect-disable with disable-wp | Masahiro Yamada | 2 | -4/+4 |
2018-08-09 | ARM: dts: wheat: Fix ADV7513 address usage | Kieran Bingham | 1 | -2/+9 |
2018-08-09 | ARM: shmobile: defconfig: Enable r8a77470 SoC | Biju Das | 1 | -0/+1 |
2018-08-09 | dt-bindings: arm: Document Renesas Ebisu board DT bindings | Yoshihiro Shimoda | 1 | -0/+2 |
2018-08-09 | dt-bindings: arm: Document R-Car E3 SoC DT bindings | Yoshihiro Shimoda | 1 | -0/+2 |
2018-08-09 | dt-bindings: arm: Document iW-RainboW-G23S single board computer | Biju Das | 1 | -0/+2 |
2018-08-09 | ARM: dts: iwg23s-sbc: Add support for iWave G23S-SBC based on RZ/G1C | Biju Das | 2 | -0/+36 |
2018-08-09 | ARM: dts: r8a77470: Initial SoC device tree | Biju Das | 1 | -0/+154 |
2018-08-09 | ARM: dts: r7s72100: sort subnodes of root node | Simon Horman | 1 | -38/+40 |
2018-08-09 | ARM: dts: r7s72100: stop grouping clocks under a "clocks" subnode | Simon Horman | 1 | -55/+49 |
2018-08-09 | ARM: dts: r7s72100: sort subnodes of soc node | Simon Horman | 1 | -285/+285 |
2018-08-09 | ARM: dts: r7s72100: add soc node | Simon Horman | 1 | -451/+459 |
2018-08-09 | ARM: dts: r7s72100: add USB device to device tree | Chris Brandt | 1 | -0/+20 |
2018-08-09 | ARM: shmobile: Add the RZ/N1 arch to the shmobile Kconfig | Michel Pollet | 1 | -0/+5 |
2018-08-09 | ARM: shmobile: r8a77470: basic SoC support | Biju Das | 3 | -0/+8 |
2018-08-09 | ARM: Always build secure_cntvoff.S on ARM V7 to fix shmobile !SMP build | Geert Uytterhoeven | 1 | -1/+1 |
2018-08-09 | ARM: smp: Add initialization of CNTVOFF | Mylène Josserand | 3 | -0/+41 |
2018-08-09 | soc: renesas: rcar-sysc: Make PM domain initialization more robust | Geert Uytterhoeven | 1 | -6/+29 |
2018-08-09 | soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B} | Yoshihiro Shimoda | 1 | -1/+36 |
2018-08-09 | soc: renesas: rcar-sysc: Add support for R-Car E3 power areas | Takeshi Kihara | 6 | -0/+44 |
2018-08-09 | soc: renesas: r8a77995-sysc: Cleanups | Geert Uytterhoeven | 1 | -2/+1 |
2018-08-09 | soc: renesas: Add r8a77990 SYSC PM Domain Binding Definitions | Takeshi Kihara | 1 | -0/+26 |
2018-08-09 | soc: renesas: rcar-sysc: Add r8a77470 support | Biju Das | 7 | -0/+62 |
2018-08-09 | media: drm: rcar-du: Add support for CRC computation | Laurent Pinchart | 3 | -6/+171 |
2018-08-09 | drm: rcar-du: Fix build failure | Laurent Pinchart | 1 | -1/+0 |
2018-08-09 | drm: rcar-du: Fix rcar_du_of_init() stub | Laurent Pinchart | 1 | -1/+1 |
2018-08-09 | drm: rcar-du: Track dma-buf fences | Emre Ucan | 1 | -0/+5 |
2018-08-09 | drm: rcar-du: Add R8A77965 support | Kieran Bingham | 1 | -0/+29 |
2018-08-09 | drm: rcar-du: Allow DU groups to work with hardware indexing | Kieran Bingham | 3 | -6/+15 |
2018-08-09 | drm: rcar-du: Split CRTC handling to support hardware indexing | Kieran Bingham | 5 | -31/+42 |
2018-08-09 | drm: rcar-du: Use the correct naming for ODPM fields in DEFR6 | Kieran Bingham | 2 | -10/+10 |
2018-08-09 | dt-bindings: display: renesas: du: Document the r8a77965 bindings | Kieran Bingham | 1 | -0/+2 |
2018-08-09 | dt-bindings: display: renesas: du: Increase indent in output table | Kieran Bingham | 1 | -13/+13 |
2018-08-09 | drm: rcar-du: Use NULL for table initialisation | Kieran Bingham | 1 | -1/+1 |
2018-08-09 | drm: rcar-du: of: Include header to define prototypes | Kieran Bingham | 1 | -0/+1 |
2018-08-09 | drm: rcar-du: Zero-out sg_tables when duplicating plane state | Laurent Pinchart | 1 | -3/+2 |
2018-08-09 | drm/rcar-du: Convert to the new generic alpha property | Maxime Ripard | 6 | -59/+9 |
2018-08-09 | drm: rcar-du: Let core take care of normalizing the zpos | Peter Ujfalusi | 1 | -9/+2 |
2018-08-09 | drm/blend: Add a generic alpha property | Maxime Ripard | 5 | -0/+56 |
2018-08-09 | drm: Add drm_mode_config->normalize_zpos boolean | Peter Ujfalusi | 3 | -2/+21 |
2018-08-09 | drm: Fix modifiers_property kernel doc | Ville Syrjälä | 1 | -1/+1 |
2018-08-09 | media: rcar-csi2: set default format if a unsupported one is requested | Niklas Söderlund | 1 | -1/+1 |
2018-08-09 | media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver | Niklas Söderlund | 3 | -0/+1098 |
2018-08-09 | media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation | Niklas Söderlund | 2 | -0/+102 |
2018-08-09 | media: rcar-vin: fix crop and compose handling for Gen3 | Niklas Söderlund | 1 | -0/+6 |
2018-08-09 | media: Revert "media: rcar-vin: enable field toggle after a set number of lin... | Niklas Söderlund | 1 | -15/+5 |
2018-08-09 | media: rcar-vin: enable field toggle after a set number of lines for Gen3 | Niklas Söderlund | 1 | -5/+15 |
2018-08-09 | media: rcar-vin: add support for MEDIA_BUS_FMT_UYVY8_1X16 | Niklas Söderlund | 2 | -0/+6 |
2018-08-09 | media: rcar-vin: fix null pointer dereference in rvin_group_get() | Niklas Söderlund | 1 | -5/+7 |
2018-08-09 | media: rcar-vin: remove generic gen3 compatible string | Niklas Söderlund | 1 | -1/+0 |
2018-08-09 | media: rcar-vin: enable support for r8a77970 | Niklas Söderlund | 1 | -0/+23 |
2018-08-09 | media: rcar-vin: enable support for r8a7796 | Niklas Söderlund | 1 | -0/+44 |
2018-08-09 | media: rcar-vin: enable support for r8a7795 | Niklas Söderlund | 2 | -1/+121 |
2018-08-09 | media: rcar-vin: extend {start, stop}_streaming to work with media controller | Niklas Söderlund | 1 | -8/+127 |
2018-08-09 | media: rcar-vin: add link notify for Gen3 | Niklas Söderlund | 1 | -0/+147 |
2018-08-09 | media: rcar-vin: parse Gen3 OF and setup media graph | Niklas Söderlund | 2 | -4/+254 |
2018-08-09 | media: rcar-vin: add chsel information to rvin_info | Niklas Söderlund | 1 | -0/+42 |
2018-08-09 | media: rcar-vin: change name of video device | Niklas Söderlund | 1 | -1/+1 |
2018-08-09 | media: rcar-vin: add group allocator functions | Niklas Söderlund | 2 | -2/+203 |
2018-08-09 | media: rcar-vin: prepare for media controller mode initialization | Niklas Söderlund | 2 | -2/+22 |
2018-08-09 | media: rcar-vin: force default colorspace for media centric mode | Niklas Söderlund | 1 | -2/+20 |
2018-08-09 | media: rcar-vin: use different v4l2 operations in media controller mode | Niklas Söderlund | 2 | -4/+156 |
2018-08-09 | media: rcar-vin: add flag to switch to media controller mode | Niklas Söderlund | 2 | -1/+7 |
2018-08-09 | media: rcar-vin: add function to manipulate Gen3 chsel value | Niklas Söderlund | 2 | -0/+39 |
2018-08-09 | media: rcar-vin: enable Gen3 hardware configuration | Niklas Söderlund | 2 | -31/+63 |
2018-08-09 | media: rcar-vin: move media bus configuration to struct rvin_dev | Niklas Söderlund | 4 | -20/+19 |
2018-08-09 | media: rcar-vin: cache video standard | Niklas Söderlund | 4 | -7/+18 |
2018-08-09 | media: rcar-vin: simplify how formats are set and reset | Niklas Söderlund | 2 | -81/+53 |
2018-08-09 | media: rcar-vin: break out format alignment and checking | Niklas Söderlund | 1 | -37/+48 |
2018-08-09 | media: rcar-vin: align pixelformat check | Niklas Söderlund | 1 | -11/+3 |
2018-08-09 | media: rcar-vin: update bytesperline and sizeimage calculation | Niklas Söderlund | 1 | -8/+2 |
2018-08-09 | media: rcar-vin: fix handling of single field frames (top, bottom and alterna... | Niklas Söderlund | 2 | -45/+10 |
2018-08-09 | media: rcar-vin: set a default field to fallback on | Niklas Söderlund | 1 | -7/+6 |
2018-08-09 | media: rcar-vin: all Gen2 boards can scale simplify logic | Niklas Söderlund | 3 | -24/+11 |
2018-08-09 | media: rcar-vin: move functions regarding scaling | Niklas Söderlund | 1 | -261/+265 |
2018-08-09 | media: rcar-vin: move max width and height information to chip information | Niklas Söderlund | 3 | -4/+13 |
2018-08-09 | media: rcar-vin: move model information to own struct | Niklas Söderlund | 3 | -18/+55 |
2018-08-09 | media: rcar-vin: move subdevice handling to async callbacks | Niklas Söderlund | 2 | -65/+70 |
2018-08-09 | media: rcar-vin: unregister video device on driver removal | Niklas Söderlund | 2 | -0/+5 |
2018-08-09 | media: rcar-vin: rename poorly named initialize and cleanup functions | Niklas Söderlund | 4 | -14/+14 |
2018-08-09 | media: rcar-vin: add Gen3 devicetree bindings documentation | Niklas Söderlund | 1 | -12/+106 |
2018-08-09 | media: dt-bindings: media: rcar_vin: add device tree support for r8a774[35] | Fabrizio Castro | 1 | -1/+4 |
2018-08-09 | media: dt-bindings: media: rcar_vin: Reverse SoC part number list | Fabrizio Castro | 1 | -7/+7 |
2018-08-09 | media: rcar-vin: Fix image alignment for setting pre clipping | Koji Matsuoka | 1 | -2/+2 |
2018-08-09 | mtd: devices: m25p80: Use spi_mem_set_drvdata() instead of spi_set_drvdata() | Boris Brezillon | 1 | -1/+1 |
2018-08-09 | mtd: spi-nor: Use the spi_mem_xx() API | Boris Brezillon | 2 | -157/+80 |
2018-08-09 | spi: Extend the core to ease integration of SPI memory controllers | Boris Brezillon | 5 | -0/+674 |
2018-08-09 | spi: Add an helper to flush the message queue | Boris Brezillon | 2 | -0/+18 |
2018-08-09 | spi: Expose spi_{map,unmap}_buf() for internal use | Boris Brezillon | 2 | -18/+48 |
2018-08-09 | dt-bindings: watchdog: renesas-wdt: Add R-Car Gen2 support | Fabrizio Castro | 1 | -7/+15 |
2018-08-09 | watchdog: renesas-wdt: Add support for the R8A77965 WDT | Wolfram Sang | 1 | -0/+1 |
2018-08-09 | watchdog: renesas-wdt: Remove R-Car M2-W ES2.x from blacklist | Geert Uytterhoeven | 1 | -1/+1 |
2018-08-09 | USB: renesas_usbhs: drop unused legacy-phy support | Johan Hovold | 2 | -30/+0 |
2018-08-09 | USB: gadget: udc: renesas_usb3: no need to check return value of debugfs_crea... | Greg Kroah-Hartman | 1 | -15/+3 |
2018-08-09 | usb: gadget: udc: renesas_usb3: fix double phy_put() | Yoshihiro Shimoda | 1 | -2/+0 |
2018-08-09 | usb: gadget: udc: renesas_usb3: should fail if devm_phy_get() returns error | Yoshihiro Shimoda | 1 | -3/+5 |
2018-08-09 | usb: gadget: udc: renesas_usb3: should call devm_phy_get() before add udc | Yoshihiro Shimoda | 1 | -8/+8 |
2018-08-09 | usb: gadget: udc: renesas_usb3: should call pm_runtime_enable() before add udc | Yoshihiro Shimoda | 1 | -1/+1 |
2018-08-09 | staging: board: Replace license boilerplate with SPDX identifiers | Nathan Chancellor | 2 | -13/+2 |
2018-08-09 | serial: sh-sci: Support for HSCIF RX sampling point adjustment | Ulrich Hecht | 2 | -23/+46 |
2018-08-09 | serial: sh-sci: Add support for dynamic instances | Geert Uytterhoeven | 2 | -0/+10 |
2018-08-09 | rtc: simplify getting .drvdata | Wolfram Sang | 15 | -131/+71 |
2018-08-09 | pinctrl: sh-pfc: rcar-gen3: Fix grammar in static pin comments | Geert Uytterhoeven | 4 | -12/+12 |
2018-08-09 | pinctrl: sh-pfc: r8a77965: Add I2C pin support | Niklas Söderlund | 1 | -0/+77 |
2018-08-09 | pinctrl: sh-pfc: r8a77990: Add EthernetAVB pins, groups and functions | Takeshi Kihara | 1 | -0/+90 |
2018-08-09 | pinctrl: sh-pfc: r8a77990: Add I2C{1,2,4,5,6,7} pins, groups and functions | Takeshi Kihara | 1 | -0/+190 |
2018-08-09 | pinctrl: sh-pfc: r8a77990: Add SCIF pins, groups and functions | Takeshi Kihara | 1 | -0/+365 |
2018-08-09 | pinctrl: sh-pfc: r8a77990: Add bias pinconf support | Takeshi Kihara | 1 | -9/+331 |
2018-08-09 | pinctrl: sh-pfc: Initial R8A77990 PFC support | Takeshi Kihara | 6 | -0/+1742 |
2018-08-09 | pinctrl: sh-pfc: Add PORT_GP_11 helper macro | Takeshi Kihara | 1 | -2/+6 |
2018-08-09 | pinctrl: sh-pfc: Add r8a77470 PFC support | Biju Das | 5 | -0/+2356 |
2018-08-09 | pinctrl: sh-pfc: r8a77965: Add SDHI pins, groups and functions | Takeshi Kihara | 1 | -0/+326 |
2018-08-09 | pinctrl: sh-pfc: r8a77965: Add DU RGB output pins, groups and functions | Kieran Bingham | 1 | -0/+116 |