Age | Commit message (Collapse) | Author | Files | Lines |
|
Signed-off-by: Gary S. Robertson <gary.robertson@linaro.org>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Gary S. Robertson <gary.robertson@linaro.org>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
on ARM I'm seeing output like:
cyclicte-623 0....... 19619418us+: tracing_mark_write: hit latency threshold (2000 > 2097)
That's because of a format mismatch in
tracemark("hit latency threshold (%d > %d)", diff, tracelimit);
diff is a u64 and tracelimit an int. So on ARM the string is passed in r0,
tracelimit in r1 and diff in r2+r3. vsnprintf used in tracemark only
expects two ints passed and so only uses r1 and r2 yielding the permutation
in the output.
This patch also adds a gcc attribute to tracemark that helps catching
similar bugs. In this case just adding the attribute but not touching
the call site, would result in:
src/cyclictest/cyclictest.c: In function ‘timerthread’:
src/cyclictest/cyclictest.c:899:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘uint64_t’ [-Wformat]
---
Hello
after some chatting with Clark and John I dropped the c99 stuff and added the
attribute annotation.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Clark Williams <clark.williams@gmail.com>
|
|
Hello,
While playing around with hackbench I discovered that I would sometimes
get an enormous time reported, even if the run time would be less than a
second or so. The problem was that the struct timeval start was not
initialized until after all children have been created. But if the
program receives a signal before this is done, the start time is left
uninitialized.
I propose that in such situations an error message be displayed, like
the following patch does.
Please let me know if this is acceptable.
Regards,
/Ciprian
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <clark.williams@gmail.com>
|
|
Signed-off-by: Clark Williams <clark.williams@gmail.com>
|
|
e.g.
cyclictest -a4,6-8 -t5
will use 5 threads, assigned round-robin to the set of CPUs {4,6,7,8}.
CPU 4 will get threads 1 and 5, CPU 6 gets thread 2, CPU 7 gets thread 3, and
CPU 8 gets thread 4.
As explained in the updated manpage, libnuma >= v2 is required for these
arbitrary CPU sets. With libnuma v1, the -a option behaves as before. As
before, compiling without libnuma is supported. The command usage help is fixed
up at compile time to always show the correct usage of the -a option.
Also note that, since numa_parse_cpustring_all() wasn't available in early
libnuma v2 versions, we use numa_parse_cpustring(). This means you'll have to
use taskset in some cases (isolcpus kernel parameter) to add the desired CPUs to
the set of allowed cores, e.g.:
taskset -c4-6 cyclictest -a4-6
Tested with out libnuma (numactl), and with versions 1.0.2 and 2.0.9-rc3.
Signed-off-by: Aaron Fabbri <ajfabbri@gmail.com>
(cherry picked from commit 5375ab86e77881d8043e5e309bb8daf5a84cc05f)
Signed-off-by: Clark Williams <clark.williams@gmail.com>
|
|
Signed-off-by: Clark Williams <clark.williams@gmail.com>
|
|
Signed-off-by: Clark Williams <clark.williams@gmail.com>
|
|
These changes make the align option truly optional as claimed.
1. Rename disaligned to offset for readability.
2. Fix the aligned option so that if no optional argument is given,
the offset defaults to 0
3. Fix some white space problems as reported by checkpatch.pl in the kernel
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
This patch provides and additional -A/--align flag to cyclictest to align
thread wakeup times of all threads as closly defined as possible.
When running multiple threads in cyclictest (-S or -t # option) the threads
are launched in an unsynchronized manner. Basically the creation order and
time for thread creation determines the start time. For provoking a maximum
congestion situation (e.g. cache evictions) and to improve reproducibility
or run conditions the start time should be defined distances appart. The
well defined distance is implemented as a offset parameter to -A/--align
and will offset each threads start time by the parameter * the sequentially
assigned thread number (par->tnum), together with the -d0 (distance in the
intervals of the individual threads) this alignment option allows to get
the thread wakeup times as closely synchronized as possible.
The method to sync is simply that the thread with par->tnum == 0 is chosen
to set a globally shared timestamp, and all other threads use this timestamp
as their starting time rather than each calling clock_gettime() at startup.
To ensure synchronization of the thread startup the setting of the global
time is guarded by pthread_barriers.
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Reviewed-by: Andreas Platschek <andreas.platschek@opentech.at>
Signed-off-by: Clark Williams <clark.williams@gmail.com>
|
|
HI !
just noticed a, presumably, unnecessary tsnorm in cyclictest
Signed-off-by: Clark Williams <clark.williams@gmail.com>
|
|
Change return value from option parsing to be enumerated type
rather than a character. Hopefully this will clean up the option
handling a bit and not confuse me when I come back to add yet
another option to cyclictest.
Signed-off-by: Clark Williams <clark.williams@gmail.com>
|
|
Commit ad27df7 ("Reimplement better child tracking and improve error
handling") changed the way of reporting pid/error after creating a
child. It will return an union which is a mix pid_t, pthread_t and a
signed long long for errors.
Now on 32bit x86 both pid_t and pthread_t are four byte in size and are
stored in the first 4 bytes. Now if the most significant bit of the long
long variable happens to be set by chance (because nobody really
initializes the variable here) then error variable will be negative. On
little endian machines the assignment of pid or threadid won't reset the
sign bit and you see this:
| Running in process mode with 10 groups using 40 file descriptors each (== 400 tasks)
| Each sender will pass 100 messages of 100 bytes
| 0 children started. Expected 40
| sending SIGTERM to all child processes
| signaling 0 worker threads to terminate
| Creating workers (error: Success)
A machine with proper endian handlig (that is big endian) would reset
the sign bit during the assignment of pid and I would not have to make
this patch :)
While here, I make create_worker() since it is not used outside of this
file.
Cc: David Sommerseth <davids@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Clark Williams <clark.williams@gmail.com>
|
|
Add the --notrace/-A option, intended to be used in conjunction
with the -b option. This will cause cyclictest to exit when a
threshold is hit, but will not perform any tracing operations,
allowing more sophisticated tracing to be done externally.
Signed-off-by: Clark Williams <clark.williams@gmail.com>
|
|
This code adds the -F/--fifo option to cyclictest. Using the
--fifo <path> option will cause cyclictest to create a named
fifo at <path> and will dump the current run statistics to that
fifo when it is opened an read.
Signed-off-by: Clark Williams <clark.williams@gmail.com>
|
|
Huge latencies are observed (close to 1 second) when certain
options are used in cyclictest.
The problem was 1st introduced at commit da4956cbcaf7945554f
("use interval on first loop instead of 1 second"). It removed
the 1 second first timing loop out of the main path in cyclictest
but left it in two other paths, namely the ones triggered by
these two options:
-r --relative use relative timer instead of absolute
-s --system use sys_nanosleep and sys_setitimer
which in turn causes the huge latencies of close to 1 second to
be reported by cyclictest with certain uses of those two options.
Here we extend the original commit to remove the 1 second
hardcoded timer values from the RELTIME and ITIMER options, by
simply using the actual interval provided instead.
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Don't tag copies of files in BUILD created when building an rpm
Without this change tags finds both copies, eg: for tag cyclictest.c
# pri kind tag file
1 F F cyclictest.c BUILD/rt-tests/src/cyclictest/cyclictest.c
1
2 F F cyclictest.c src/cyclictest/cyclictest.c
With this change, only the later one is found
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
version 2:
- Add new placeholders in rt-tests.spec-in to make the replacements by
"make rpm" more visible to future maintainers of rt-tests.spec-in
- fix typo of my name in rt-tests.spec-in
rt-tests can be built without NUMA:
make NUMA=0
But "make rpm" does not have a way to be successful without NUMA:
build_rt-tests_0.85> make rpm
for F in cyclictest signaltest pi_stress rt-migrate-test ptsematest sigwaittest svsematest pmqtest sendme pip_stress hackbench *.o .depend *.*~ *.orig *.rej rt-tests.spec *.d *.a ChangeLog; do find -type f -name $F | xargs rm -f; done
rm -f hwlatdetect
rm -f tags
rm -rf BUILD BUILDROOT RPMS SRPMS SPECS releases *.tar.gz rt-tests.spec tmp
git log >ChangeLog
mkdir -p releases
mkdir -p tmp/rt-tests
cp -r Makefile COPYING ChangeLog src tmp/rt-tests
tar -C tmp -czf rt-tests-0.85.tar.gz rt-tests
rm -f ChangeLog
cp rt-tests-0.85.tar.gz releases
sed s/__VERSION__/0.85/ <rt-tests.spec-in >rt-tests.spec
rpmbuild -ba --define "_topdir /a/home/frowand/me/src/rt-tests/build_rt-tests_0.85" --define "_sourcedir /a/home/frowand/me/src/rt-tests/build_rt-tests_0.85/releases" --define "_builddir /a/home/frowand/me/src/rt-tests/build_rt-tests_0.85/BUILD" rt-tests.spec
error: Failed build dependencies:
numactl-devel is needed by rt-tests-0.85-1.fc12.src
make: *** [rpm] Error 1
The following patch allows the rpm to be built without NUMA, with the command:
make NUMA=0 rpm
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
make rpm creates the dirs BUILDROOT and SPECS that are missed by distclean.
Gather all rpm related DIRS to the RPMDIRS and add that to distclean.
Signed-off-by: John Kacur <jkacur@redhat.com>
Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
Tested-by: Frank Rowand <frank.rowand@am.sony.com>
|
|
The files in the tmp dir are generated during make release.
These are the kind of generated files that should be removed for distclean,
So add tmp. make release can be slightly simplified by then depending
on distclean instead of clean.
Signed-off-by: John Kacur <jkacur@redhat.com>
Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
Tested-by: Frank Rowand <frank.rowand@am.sony.com>
|
|
Don't tag the copies of the source files placed in the tmp directory
during the creation of a release.
Without this change tags finds both copies, eg: for tag cyclictest.c
# pri kind tag file
1 F C F cyclictest.c src/cyclictest/cyclictest.c
1
2 F F cyclictest.c tmp/rt-tests/src/cyclictest/cyclictest.c
1
With this change only the first one is found.
Signed-off-by: John Kacur <jkacur@redhat.com>
Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
Tested-by: Frank Rowand <frank.rowand@am.sony.com>
|
|
Clean up cyclictest formatting:
Change leading spaces to tabs.
Align function parameters.
Place type of function on same line as function name.
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
V3: Use src/lib/error.c functions instead of fprintf.
Fix printf format warnings for 32 bit vs 64 bit systems with cast.
One issue with using warn() and info() instead of fprintf is that
the compiler no longer warns about format mismatches.
Fix bad continuation line white space prefix.
Remove unused variable zero_diff.
cyclictest: ARM panda clock resolution will be ~30 usec unless
CONFIG_OMAP_32K_TIMER=n, resulting in a poor latency report.
This patch does _not_ fix the problem, it merely provides the
instrumentation to make it visible. The value of measured
resolution is useful information for any system.
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
- Fixed up minor white space problem.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
V3: unchanged from V2
cyclictest getopt_long() parameter clean up.
Clean up before following patch which will add a new option.
Some elements of long_options were not in alphabetical order.
Some elements of optstring were not in alphabetical order.
'-e', '--latency' was missing help text
short form of --duration ('D') was missing from optstring
Change a few instances of leading spaces to tabs.
Add white space to long_options to improve readability.
Some cases of the switch processing the result of
getopt_long() were not in alphabetical order.
Did _not_ clean up option value parsing and processing.
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: John Kacur <jkacur@redhat.com>
Conflicts:
src/cyclictest/cyclictest.c
|
|
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
For compilation to work
-D_GNU_SOURCE -Isrc/include
is needed to be passed to the compiler. For Debian packaging several
things are added but not these two from above. So be a bit more friendly
and add them unconditionally. There is no harm if they are included in
the user supplied CFLAGS and so passed twice.
Moreover be a bit more correct about CFLAGS/CPPFLAGS. Both should be
passed to the compiler with CFLAGS taking options for the compiler and
CPPFLAGS taking options for the preprocessor. This is also needed for
Debian packaging where the helper scripts set CPPFLAGS.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Discovered while compiling with "hardening flags"
For Debian 7.0 (aka wheezy) packages it's recommended to use several
hardening flags, the default on amd64 being:
CFLAGS=-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
CPPFLAGS=-D_FORTIFY_SOURCE=2
LDFLAGS=-Wl,-z,relro
This patch doesn't fix all warnings but at least makes all programs compile
again by not using char *variables as printf format strings.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Minor fix to make working with git nicer.
Now that we're building a lib, we need to exclude it from git status output.
Do the same for patches we generate or apply.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Add feature to cyclictest histogram mode to track cycle counts every time a
sample overflows the histogram limit. This should help identify if there is a
timing pattern to jitters in cyclictest runs.
Example output (with -h 10):
...
Histogram Overflows: 00001 00007 00000 00009 00004 00007 00000 00001
Histogram Overflow at cycle number:
Thread 0: 09964
Thread 1: 00000 00004 00006 00008 00010 09962 11594
Thread 2:
Thread 3: 01169 04698 06782 09033 10299 11561 21517 28734 29532
Thread 4: 11574 11580 11583 11586
Thread 5: 00020 09448 13954 14954 18954 20587 24973
Thread 6:
Thread 7: 18950
...
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Cosmetic whitespace cleanup
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Add back call to the tracemark function but only if we're
using the breaktrace option and only when we actually hit
the breaktrace threshold.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
priority.
Currently if a non-root user requests a priority higher than the soft limit in
/etc/security/limits.conf
the call to sched_setscheduler will silently fail and the user will be running
with priority of 0. Cyclictest will not complain, and display the
requested priority resulting in seemingly poor results.
The following patch fixes this by doing two things.
1. If the requested priority is higher than the soft limit but lower than the
hard limit, it will raise the soft limit to the requested priority.
2. If the requested priority is higher than the hard limit, it will fail with a
warning.
The patch should not affect privileged users.
Reported-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
V2: use type casting instead of ugly constant in format string
Fix printf format string to fix compile warning for ARM 32 bit target.
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
When the --verbose option is selected, the first value for each thread is
incorrectly reported as zero.
This is because when collecting the first value, the index into stat->values is
incremented from zero to one before storing the value. But when printing the
values, the first value printed is stat->values[0], which has been initialized
to zero.
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Fix the machinetype check for cross-compiling.
This has been tested on an x86_64 Fedora host for an x86_64 target and
an ARM target. Additional testing would be greatly appreciated.
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Tested-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
The '-a' option is always ignored if --smp or --numa is specified. Fix the
warning message to not depend on --smp or --numa occuring first.
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Tested-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Avoid annoying warning message when tracing is not requested and the debug
file system is not available.
The same test already protects against calling event_enable_all().
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
This fixes a segfault on ARM when the '-a' option is used.
man sched_setaffinity says to use pthread_setaffinity_np() when using the
POSIX threads API.
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Tested-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Conflicts:
Makefile
|
|
Start of an ongoing process to have error strategy where return is
checked and if error, exit with appropriate status.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
The following build error can occur if you have done a previous make install
if test -n "/usr/lib/python2.7/site-packages" ; then \
install -D -m 755 src/hwlatdetect/hwlatdetect.py /usr/lib/python2.7/site-packages/hwlatdetect.py ; \
ln -s /usr/lib/python2.7/site-packages/hwlatdetect.py "/usr/local/bin/hwlatdetect" ; \
fi
ln: failed to create symbolic link `/usr/local/bin/hwlatdetect': File exists
make: *** [install] Error 1
I initially wanted to fix the error by removing the symbolic link, with rm -rf
but Andrew Burgess pointed out that you can just use the
ln's -f (force) flag. I like that solution better.
Suggested-by: Andrew Burgess <aab@cichlid.com>
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
This reverts commit 64e635bc513a3a114729f86de7a87780b2737605.
moving to the check-return-and-exit strategy
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
|
|
The following build error can occur if you have done a previous make install
if test -n "/usr/lib/python2.7/site-packages" ; then \
install -D -m 755 src/hwlatdetect/hwlatdetect.py /usr/lib/python2.7/site-packages/hwlatdetect.py ; \
ln -s /usr/lib/python2.7/site-packages/hwlatdetect.py "/usr/local/bin/hwlatdetect" ; \
fi
ln: failed to create symbolic link `/usr/local/bin/hwlatdetect': File exists
make: *** [install] Error 1
Fix the error by removing the symbolic link.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Move warning, error and fatal function to the error files.
This is a first step in cleaning up rt-tests.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Introduce a static libray.
Currently it contains the functions in rt-utils.c error.c and rt-get_cpu.c
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Accept user supplied CFLAGS and LDFLAGS, overwriting the
Makefile supplied versions. This can cause the build to
fail if the user does not provide at least what the Makefile
defines, but so be it.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Clark Williams <williams@redhat.com>
CC: John Kacur <jkacur@redhat.com>
CC: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Check the status of sched_getaffinity and exit upon error.
CPU_ISSET only checks whether a cpu is in a mask, and not whether the
mask is valid. Checking the status ensures we aren't working with garbage
values.
This also removes the warning from gcc about the status variable being unused
as reported by Darren Hart.
Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
The rt-migrate-test in the rt-tests is still using the old logdev
interface that requires the logdev patch. Ftrace has been introduced
into mainline Linux since 2.6.27 and has many more features than logdev.
The rt-migrate-test should interact with ftrace instead of logdev.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Many rt-test programs including cyclictest have directories with the
same name as the generated binaries. Tell .gitignore to only ignore
the program names and not the directories by using a slash prefix.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
|
|
HI !
minor bug in cyclictest but potential causing confusion on cyclictest
resuults when running as non-root user.
Setup:
if one sets the rtprio in /etc/security/limits.conf to something below
prio max - like:
@hofrat hard rtprio 10
@hofrat soft rtprio 10
but then starts cylictest with -p 80 cyclictest will not fuss and also
display priority 80 (as it uses par->prio in print_stat) but effectively
runs with prio 0 as the return value of sched_setscheduler is not being
checked in timerthread), resulting in semingly bad scheduling jitter values.
So maybe cyclictest should take the effective maximum schduling priority
of the user and not the scheduling policy maximum. Not sur if the check
in timerthread is actually really needed - but it should not hurt ither.
patch below (against current git) at "works for me" quality.
thx!
hofrat
|
|
|
|
Add option to spread priorities across measurement threads in
decending order.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Combined Uwe Kleine-König and Frank Rowand's suggestions into a
Makefile modification that tries to be smart about turning on
NUMA, while allowing it to be explicitly enabled/disabled via
command line options
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Changed function name to set_latency_target() and added a
command line argument to allow passing in values other than
the default of zero microseconds.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Use the /dev/cpu_dma_latency power management interface to hold the
system in idle=poll state while cyclictest is running. Look in the
kernel documenation: Documentation/power/pm_qos_interface.txt for
more information.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
added a signal_worker routine to send individual SIGTERM's to
worker threads (since sending via pid=0 seems to have issues).
Also added the -F/--fifo option to change the main thread to a
SCHED_FIFO realtime thread after creating the workers. This will
allow the mangagement thread to run when there are tons of workers.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Modify signal handling logic so main can't receive sigterm when
reaping children
Also added THREAD_MODE and PROCESS_MODE defines to use rather than
bare constants 0 and 1.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
removed trace marking functions because they cause too much
contention on multiprocessor systems.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Before trying to parse /proc/mount, check for existance of directories
/sys/kernel/debug/tracing and /debug/tracing using stat(2).
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Only turn on ftrace_enabled if we're doing tracing that requires
the function tracer. Don't turn it on for event-based tracing. Also,
turn it off a the end of a run.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Use the interval given for the first loop instead of
one second wait.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If the tracemark_fd is >= 0, then we know we can write to the
trace_marker file. We only need to check that and not version of
the kernel or anything else at every instance of calling tracemark().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The -b argument is for stopping the cyclictest when it misses a wakup
by that # microseconds. Setting the tracing_thresh causes the latency tracer
to ignore any latency under tracing_thresh. These two meanings are completely
agnostic to each other, and should not be the same. We want the max latency,
that should be good enough. Not only those that are bigger than our missed
deadline. That misses most of our traces that we want.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
-B is used to enable preemptirqsoff, but it also makes sense that one
could use both -I and -P together for the same thing.
Also rename the enum IRQPREEMPTOFF TO PREEMPTIRQSOFF to match the
tracer it represents and avoid confusion.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Events are available for all tracers, including function and latency
tracers. Do not treat them as a tracer. The -E option is agnostic to
the tracer options, and if it is set, then events will be enabled for
any tracer that is also set. If it is set by itself, then events will
be enabled with the nop tracer.
Also, the nop tracer is set before setting any of the tracers. This
makes the nop tracer the default as well as clears out the trace before
running the test.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
strncat writes up to n+1 chars when n is passed as 3rd argument. So when
doing
strncpy(filename, fileprefix, sizeof(filename));
strncat(filename, name, sizeof(filename) - strlen(fileprefix));
with strlen(fileprefix) + strlen(name) >= sizeof(filename) a buffer
overflow occurs. Addionally there is no check if filename is big enough.
So convert to memcpy and handle filename not being big enough.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
reworked the kernel versioning logic to handle the 3.0 kernel
and update the ftrace logic to deal with changes to the
debugfs tracing directory.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
|
|
1. Make the function header style consistent with the rest of cyclictest.
2. Spelling clean-ups.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Need python to be able to correctly install hwlatdetect.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Use setjmp/longjump to get the parent process back out of processing
loop and into forced kill mode for the child processes/threads.
Added function reset_worker_signals() so that workers (sender and
receiver) don't try to reap as well.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
When we try to run ftrace with cyclictest command of rt-test,
We view the error according to different kernel version.
We need to modify this hard coded interface.
* Directory name of each kernel version
2.6.24.7-rt23 /sys/kernel/debug/tracing/latency_hist/wakeup_latency/reset
2.6.31-rc9-rt9.1 /sys/kernel/debug/tracing/latency_hist/wakeup/reset
2.6.33.7.2-rt30 /sys/kernel/debug/tracing/latency_hist/wakeup/reset
* parsing verification: ./linux-2.6/scripts/checkpatch.pl --> OK
Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com>
Reviewed-by: John Kacur <jkacur@redhat.com>
Reviewed-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
install can also create directories with -D
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
To compare histograms of several SMP machines or to gain an
overview when cyclictest is running more than a single thread,
an overall histogram is required that contains a summary of
the individual thread latencies.
This patch adds this functionality and introduces the new
option -H/--histofall for this purpose.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Change type of faux sched_setaffinity to match headers.
Also add additional report info when dumping histogram.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Only installing backfire.c hardly makes sense.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
- don't rely on non-standard envvar PWD, use make's CURDIR instead
- allow overwriting KERNELDIR
- less repetition by conflating targets
- explicitly differentiate between kbuild and ordinary make part
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Cleanup spurred by need to make the 'diff' variable in timerthread() to
be unsigned and 64-bits (rather than a signed 32-bit).
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Documented the --numa mode option to cyclictest in the man page.
Also updated the command summary to include the short options for
the --smp and --numa modes (-S and -U).
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
When using a POSIX interval timer and an overrun occurs, a signal is always
lost. From then on cyclictest would report all measurements as increased by
N*period (where N is the number of overruns).
cyclictest can detect the overruns and adjust the expected time of the next
tick accordingly.
Reported-by: Marti Raudsepp <marti@juffo.org>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
|
|
If python is not available on the target, skip the
hwlatdetect.py installation with:
make PYLIB= DESTDIR=/some/dir install
Create PYLIB during make install with DESTDIR set
Also, the second bindir should probably be srcdir.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
|
|
After much thought, I decided to keep cyclictest's default scheduling
policy as SCHED_OTHER. My rationale is that if you don't specify a
priority on the command line you get the priorityless policy. If you
do specify a priority but no specific RT policy, we'll default to
SCHED_FIFO. So to get SCHED_RR you have to specify priorty and policy
name, for example:
# cyclictest --priority=90 --policy=rr
Yes, I realize that the vast majority of users will run it with a
realtime priority, but I just don't like picking a priority if it
wasn't specified. If you want a realtime policy, specify a priority.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
|
|
The call numa_node_to_cpus() in rt_numa_numa_node_of_cpu()
was failing because the cpumask buffer size was only 16 bytes
and it seems to require 32. Change the declaration to be 256
just for paranoia's sake.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Since it's doing relative time sleeps probably not an issue, but
move to clock_nanosleep(CLOCK_MONOTONIC, 0,...) to be clear.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
This patch adds the program pmqtest to the rt-tests suite.
The test mechanism is the same as in ptsematest, svsematest
and friends, but it uses message queues to synchronize the
test threads. To test the - now hopefully fixed - kernel
problem that occurred when a timeout was specified, the
-T option is available.
On an 8-way machine, the test result may look like:
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Somewhere between 2.6.24 and 2.6.33, the tracing_on field was
added to the debugfs tracing dir. If it exists use it to turn
tracing on and off; if not use tracing_enabled.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Conflicts:
.gitignore
Makefile
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Changed description field to be more descriptive
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Change enable/disable file to be tracing/tracing_on; enable the
options/latency-trace format for function tracing; add tracetype
CUSTOM for use with the -T/--tracer option.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
the -T option (set tracer) option was missing a ':' for to indicate
that it required an argument.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Add SMP testing option (-S, --smp) to svsematest, same as in
cyclictest.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Acked-by: John Kacur <jkacur@redhat.com>
|
|
Add SMP testing option (-S, --smp) to ptsematest, same as in
cyclictest.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Acked-by: John Kacur <jkacur@redhat.com>
|
|
The help message of cyclictest's -S option says that it equals -a -t -n -m -d0.
In reality, it only equals -a -t -n.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Acked-by: John Kacur <jkacur@redhat.com>
|
|
If the policy is forced to SCHED_OTHER, since the priority no longer
fits into the SCHED_FIFO or SCHED_RR range, the policy display of
cyclictest is somewhat incorrect.
Display all policies.
Also make the variable policystr static; the condition
"if (!policystr)" is useless, otherwise.
In addition, place the priority logic before decrementing the priority;
a priority of 1 is incorrectly made SCHED_OTHER, otherwise.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Acked-by: John Kacur <jkacur@redhat.com>
|
|
The default scheduling policy if unspecified should be SCHED_FIFO.
Before the change for example.
sudo ./cyclictest
policy: other: loadavg: 0.05 0.04 0.05 1/331 22367
T: 0 (22367) P: 0 I:1000 C: 1321 Min: 14 Act: 89 Avg: 77 Max: 942
After the change
sudo ./cyclictest
defaulting realtime priority to 2
policy: fifo: loadavg: 0.03 0.04 0.05 2/331 22387
T: 0 (22387) P: 2 I:1000 C: 713 Min: 17 Act: 41 Avg: 81 Max: 161
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
- In the -mlockall section, change "an" to "and"
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
- Use symbolic names for scheduling policies, that is, don't assume
SCHED_RR is 2, use SCHED_RR instead, and so on.
- Fix the logic in handlepolicy(char *polname)
- remove the test with the unreachable line,
- make the default SCHED_FIFO if we don't recognize the
requested policy.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
This reverts commit 582be2a52c43801a10d318de7491f1cc7243d5cf.
Unfortunately this commit introduces a bug because the priority is not
retested, and this can result in reported priorities below 0.
For example,
sudo ./cyclictest -t3 -p1
policy: fifo: loadavg: 0.09 0.06 0.05 1/331 21732
T: 0 (21730) P: 1 I:1000 C: 593 Min: 34 Act: 155 Avg: 100 Max: 672
T: 1 (21731) P: 0 I:1500 C: 395 Min: 15 Act: 43 Avg: 72 Max: 853
T: 2 (21732) P:-1 I:2000 C: 297 Min: 21 Act: 57 Avg: 79 Max: 330
Notice that the last priority is reported as -1.
After reverting this commit, we get the correct expected behaviour.
sudo ./cyclictest -t3 -p1
policy: fifo: loadavg: 0.07 0.05 0.04 2/330 21754
T: 0 (21752) P: 1 I:1000 C: 11600 Min: 13 Act: 7072 Avg: 3593 Max: 7841
T: 1 (21753) P: 0 I:1500 C: 7737 Min: 12 Act: 1572 Avg: 516 Max: 2381
T: 2 (21754) P: 0 I:2000 C: 5804 Min: 12 Act: 53 Avg: 59 Max: 548
I think it can be argued that the original code is also clearer, although
that is somewhat subjective. With the original code I don't need to track
down exactly what "sameprio" means, and it is clear what is being tested.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
The command name is already taken by a perl script working with CPAN
and a Python package installer.
While at it remove trailing whitespace from three lines in
src/pi_tests/pip_stress.c.
Closes: http://bugs.debian.org/572104
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
These temporary files were a real problem when creating the Debian
package for rt-tests. debhelper (a generic suite of scripts to ease
packaging) did something like:
perl -c 'close(STDERR); exec("make distclean");'
which leaked the *.d.$$ files and then wailed that the package contained
untracked changes to the vanilla source. See
http://bugs.debian.org/570443 for some more details.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: John Kacur <jkacur@redhat.com>
|
|
Acked-by: John Kacur <jkacur@redhat.com>
|
|
Acked-by: John Kacur <jkacur@redhat.com>
|
|
|
|
|
|
Added hackbench.8 installation to both Makefile and specfile
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
|
|
|
|
These temporary files were a real problem when creating the Debian
package for rt-tests. debhelper (a generic suite of scripts to ease
packaging) did something like:
perl -c 'close(STDERR); exec("make distclean");'
which leaked the *.d.$$ files and then wailed that the package contained
untracked changes to the vanilla source. See
http://bugs.debian.org/570443 for some more details.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
|
|
We don't need to ship that, and Craig Thomas wrote only that code as far
as we know, so taking him out of man page as well.
|
|
|
|
|
|
|
|
|
|
|
|
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
When receiving SIGINT or SIGTERM, it will now reap all worker
threads/processes and properly stop them.
|
|
Improved argument/option handling by using getopt_long(). Made more of the
parameters tunable as well. Hackbench now accepts the following arguments:
-P | --pipe Use pipe
-s | --datasize Number of bytes to pass from sender to receiver
(default 100 bytes)
-l | --loops Number of messages each sender will send
(default 100 rounds)
-g | --groups Number of groups with sender/receivers
(default 10 groups)
-f | --fds Number of file descriptors each group will use
(default 20*2)
-T | --threads Run using pthreads
-P | --process Run using fork()
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
This does much what earlier commits did before hackbench got updated
to the latest version in the previous commit.
Consider the following commits being "forward ported", feature wise:
4c39eff2136c39b3c2746ca293eed5b5242aea52
0a72fcaade064b70b698aab676217f28681280ff
fbd80c495bd861545713279d5f96f1e4770d6911
bd588c92b8bae59e3404fc3c90283e98c9f0a96e
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Downloaded from http://people.redhat.com/mingo/cfs-scheduler/tools/hackbench.c
February 19 2010.
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
|
|
Improved argument/option handling by using getopt_long(). Made more of the
parameters tunable as well. Hackbench now accepts the following arguments:
-P | --pipe Use pipe
-s | --datasize Number of bytes to pass from sender to receiver
(default 100 bytes)
-l | --loops Number of messages each sender will send
(default 100 rounds)
-g | --groups Number of groups with sender/receivers
(default 10 groups)
-f | --fds Number of file descriptors each group will use
(default 20*2)
-T | --threads Run using pthreads
-P | --process Run using fork()
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
This does much what earlier commits did before hackbench got updated
to the latest version in the previous commit.
Consider the following commits being "forward ported", feature wise:
4c39eff2136c39b3c2746ca293eed5b5242aea52
0a72fcaade064b70b698aab676217f28681280ff
fbd80c495bd861545713279d5f96f1e4770d6911
bd588c92b8bae59e3404fc3c90283e98c9f0a96e
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Downloaded from http://people.redhat.com/mingo/cfs-scheduler/tools/hackbench.c
February 19 2010.
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
added makefile targets for hackbench scheduler benchmark
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Valgrind complained about usage of non-initialised data. The compiler
complained about the out_fds argument being unsigned int when calling
sender().
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Instead of just exiting immediately the original version did, we now
count how many children who failed to exit properly and report it.
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
In commit 4c39eff2136c39b3c2746ca293eed5b5242aea52 a new approach for tracking
each child was implemented. But this implementation ignored the fact that each
group() call creates 2*num_fds children.
This patch refactors the previous attempt and will now track absolutely all
children. If fork() fails when called in group(), all spawned children will
now also be killed explicitly.
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Quite often it's experienced in rteval that hackbench leaves some children
as zombies during closure. This is an attempt to keep an overview of the
status of each child separately. It's solved by having an array with all
sender and reciever children's pids and calling waitpid() on each of these
children pairs.
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: David Sommerseth <davids@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Fix code in check_privs() that passes NULL as parameter
to sched_setscheduler().
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Add a workaround to hwlatdetect to deal with a broken block of
code in drivers/misc/smi_detector.ko, where whenever you enable
the module (write a 1 to debugfs/smi_detector/enable) the stats
initialization routine resets the threshold from whatever it was
set to to 1us. This workaround checks the threshold after enabling
the module and resets it to what we want.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Ignore dependency files *.d ing git.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Automatically generate dependencies. This will tell the make file that
cyclictest is dependent on rt_numa.h for example, and that if a change
is made there, then cyclictest needs to be remade.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Fix some style problems, such as spaces instead of tabs, trailing spaces,
spaces required before }
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Remove the ret variable, the end lable and the goto. We already have
inconsistent exit points for the function, and the end lable wasn't strictly
for errors. Directly returning simplifies and shortens the code.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Separate the #ifdef LIBNUMA_API_VERSION of function rt_numa_numa_node_of_cpu,
it is slightly cleaner this way.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Add a header which includes a copyright notice to rt_numa.h for cyclictest.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Modified NUMA code to handle version 1 API (for RHEL5)
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Added NUMA=1 to specfile build command line to enable NUMA
options. Added description of --numa option to usage output.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: John Kacur <jkacur@redhat.com>
Cc: Carsten Emde <carsten.emde@osadl.org>
|
|
Moved the hwlatdetect script to the python site-library directory
so that it can be imported by other scripts
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Some embedded developers cross-compile the tests with the -static link flag.
Reordering the link flags in LIBS to put -lrt before -lpthread is necessary,
else you get undefined references to pthread calls.
Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com>
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
use a variable to indicate that priorities should be equal
on all cpus when smp, numa or histogram options are specified.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Runtime tests are not sufficient, cyclic tests needs to be compilable
on non-numa systems.
This separates numa functionality into rt_numa.h
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
This adds a NUMA compile option, and links to numa only for the tests that
need it. (Currently that is only cyclictest)
If you want to build with the NUMA feature, then define NUMA to anything.
Eg., make NUMA=1
This only adds support to the Makefile. Further patches are required
to make this work in cyclictest itself.
Signed-off-by: John Kacur <jkacur@redhat.com>
|
|
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
added back reference to outpar label in allocation failure for
statistics array (got dropped in previous two commits).
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
refactored numa allocation logic into threadalloc() and added
threadfree() for releasing it.
Signed-off-by: Clark Williams <williams@redhat.com>
|
|
Modify cyclictest to have a --numa option which enables calls into
libnuma functions for binding threads to memory nodes.
Signed-off-by: Clark Williams <williams@redhat.com>
|