commit 36bd5bfe43496f6bb9ab512af46c95b8d152ee99
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Sat Nov 26 09:57:13 2016 +0100
Linux 4.8.11
commit a9a0027757f8c317f1d7334c095bde96b4a0f84c
Author: Phil Reid <preid@electromag.com.au>
Date: Tue Nov 8 14:00:45 2016 +0800
gpio: pca953x: Fix corruption of other gpios in set_multiple.
commit 53f8d322234649b4d6f1515b20c127a577efd164 upstream.
gpiod_set_array_value_complex does not clear the bits field.
Therefore when the drivers set_multiple funciton is called bits outside
the mask are undefined and can be either set or not. So bank_val needs
to be masked with bank_mask before or with the reg_val cache.
Fixes: b4818afeacbd ("gpio: pca953x: Add set_multiple to allow multiple")
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88fce76cf59055ddf97667001dbd26577b8760e0
Author: Phil Reid <preid@electromag.com.au>
Date: Tue Nov 8 13:18:11 2016 +0800
gpio: pca953x: Move memcpy into mutex lock for set multiple
commit 386377b5473043c09b2de40bfe5abfb0fc87e1b4 upstream.
Need to ensure that reg_output is not updated while setting multiple
bits. This makes the mutex locking behaviour for the set_multiple call
consistent with that of the set_value call.
Fixes: b4818afeacbd ("gpio: pca953x: Add set_multiple to allow multiple")
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a7b808949518e702eddddbd97c9948e4e6b7de9
Author: Anders K. Pedersen <akp@cohaesio.com>
Date: Sun Oct 9 13:49:02 2016 +0000
netfilter: nft_dynset: fix element timeout for HZ != 1000
commit a8b1e36d0d1d6f51490e7adce35367ed6adb10e7 upstream.
With HZ=100 element timeout in dynamic sets (i.e. flow tables) is 10 times
higher than configured.
Add proper conversion to/from jiffies, when interacting with userspace.
I tested this on Linux 4.8.1, and it applies cleanly to current nf and
nf-next trees.
Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates")
Signed-off-by: Anders K. Pedersen <akp@cohaesio.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd4251fa4d094d57b7e4ccd673350ce2f3d15be9
Author: Mark Bloch <markb@mellanox.com>
Date: Thu Oct 27 16:36:27 2016 +0300
IB/cm: Mark stale CM id's whenever the mad agent was unregistered
commit 9db0ff53cb9b43ed75bacd42a89c1a0ab048b2b0 upstream.
When there is a CM id object that has port assigned to it, it means that
the cm-id asked for the specific port that it should go by it, but if
that port was removed (hot-unplug event) the cm-id was not updated.
In order to fix that the port keeps a list of all the cm-id's that are
planning to go by it, whenever the port is removed it marks all of them
as invalid.
This commit fixes a kernel panic which happens when running traffic between
guests and we force reboot a guest mid traffic, it triggers a kernel panic:
Call Trace:
[<ffffffff815271fa>] ? panic+0xa7/0x16f
[<ffffffff8152b534>] ? oops_end+0xe4/0x100
[<ffffffff8104a00b>] ? no_context+0xfb/0x260
[<ffffffff81084db2>] ? del_timer_sync+0x22/0x30
[<ffffffff8104a295>] ? __bad_area_nosemaphore+0x125/0x1e0
[<ffffffff81084240>] ? process_timeout+0x0/0x10
[<ffffffff8104a363>] ? bad_area_nosemaphore+0x13/0x20
[<ffffffff8104aabf>] ? __do_page_fault+0x31f/0x480
[<ffffffff81065df0>] ? default_wake_function+0x0/0x20
[<ffffffffa0752675>] ? free_msg+0x55/0x70 [mlx5_core]
[<ffffffffa0753434>] ? cmd_exec+0x124/0x840 [mlx5_core]
[<ffffffff8105a924>] ? find_busiest_group+0x244/0x9f0
[<ffffffff8152d45e>] ? do_page_fault+0x3e/0xa0
[<ffffffff8152a815>] ? page_fault+0x25/0x30
[<ffffffffa024da25>] ? cm_alloc_msg+0x35/0xc0 [ib_cm]
[<ffffffffa024e821>] ? ib_send_cm_dreq+0xb1/0x1e0 [ib_cm]
[<ffffffffa024f836>] ? cm_destroy_id+0x176/0x320 [ib_cm]
[<ffffffffa024fb00>] ? ib_destroy_cm_id+0x10/0x20 [ib_cm]
[<ffffffffa034f527>] ? ipoib_cm_free_rx_reap_list+0xa7/0x110 [ib_ipoib]
[<ffffffffa034f590>] ? ipoib_cm_rx_reap+0x0/0x20 [ib_ipoib]
[<ffffffffa034f5a5>] ? ipoib_cm_rx_reap+0x15/0x20 [ib_ipoib]
[<ffffffff81094d20>] ? worker_thread+0x170/0x2a0
[<ffffffff8109b2a0>] ? autoremove_wake_function+0x0/0x40
[<ffffffff81094bb0>] ? worker_thread+0x0/0x2a0
[<ffffffff8109aef6>] ? kthread+0x96/0xa0
[<ffffffff8100c20a>] ? child_rip+0xa/0x20
[<ffffffff8109ae60>] ? kthread+0x0/0xa0
[<ffffffff8100c200>] ? child_rip+0x0/0x20
Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ce92be782f808aed386fbb0d76aba1db34735c6
Author: Tariq Toukan <tariqt@mellanox.com>
Date: Thu Oct 27 16:36:26 2016 +0300
IB/uverbs: Fix leak of XRC target QPs
commit 5b810a242c28e1d8d64d718cebe75b79d86a0b2d upstream.
The real QP is destroyed in case of the ref count reaches zero, but
for XRC target QPs this call was missed and caused to QP leaks.
Let's call to destroy for all flows.
Fixes: 0e0ec7e0638e ('RDMA/core: Export ib_open_qp() to share XRC...')
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 160149299f71c36770be6e627f035bd2377ac3ab
Author: Dennis Dalessandro <dennis.dalessandro@intel.com>
Date: Tue Oct 25 13:12:46 2016 -0700
IB/hfi1: Remove incorrect IS_ERR check
commit 2b16056f845207967a32497f41cf92b57849f934 upstream.
Remove IS_ERR check from caching code as the function being called does
not actually return error pointers.
Fixes: f19bd643dbde: "IB/hfi1: Prevent NULL pointer deferences in caching code"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46e47543175b6784b02f7b587ef83b44fd2c8f7d
Author: Mark Bloch <markb@mellanox.com>
Date: Thu Oct 27 16:36:31 2016 +0300
IB/core: Avoid unsigned int overflow in sg_alloc_table
commit 3c7ba5760ab8eedec01159b267bb9bfcffe522ac upstream.
sg_alloc_table gets unsigned int as parameter while the driver
returns it as size_t. Check npages isn't greater than maximum
unsigned int.
Fixes: eeb8461e36c9 ("IB: Refactor umem to use linear SG table")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82c377d0531156d30e6d26c3eb13122e8c1c8677
Author: Eli Cohen <eli@mellanox.com>
Date: Thu Oct 27 16:36:46 2016 +0300
IB/mlx5: Fix NULL pointer dereference on debug print
commit a1ab8402d15d2305d2315d96ec3294bfdf16587e upstream.
For XRC QP CQs may not exist. Check before attempting dereference.
Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 554e4b69f1bbcd55a6e1af505ae0e96d6f485140
Author: Eli Cohen <eli@mellanox.com>
Date: Thu Oct 27 16:36:44 2016 +0300
IB/mlx5: Fix fatal error dispatching
commit dbaaff2a2caa03d472b5cc53a3fbfd415c97dc26 upstream.
When an internal error condition is detected, make sure to set the
device inactive after dispatching the event so ULPs can get a
notification of this event.
Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32091ee63d17a8eaaa25a9bcd99d12d236f2b603
Author: Majd Dibbiny <majd@mellanox.com>
Date: Thu Oct 27 16:36:39 2016 +0300
IB/mlx5: Fix memory leak in query device
commit 90be7c8ab72853ff9fc407f01518a898df1f3045 upstream.
We need to free dev->port when we fail to enable RoCE or
initialize node data.
Fixes: 0837e86a7a34 ('IB/mlx5: Add per port counters')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21822a5bbddd7c097e8822b6f762c697f1fc6558
Author: Daniel Jurgens <danielj@mellanox.com>
Date: Thu Oct 27 16:36:41 2016 +0300
IB/mlx5: Use cache line size to select CQE stride
commit 16b0e0695a73b68d8ca40288c8f9614ef208917b upstream.
When creating kernel CQs use 128B CQE stride if the
cache line size is 128B, 64B otherwise. This prevents
multiple CQEs from residing in a 128B cache line,
which can cause retries when there are concurrent
read and writes in one cache line.
Tested with IPoIB on PPC64, saw ~5% throughput
improvement.
Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad886a0e9035e4963f9cc0306dcf62a7aba0f90d
Author: Maor Gottlieb <maorg@mellanox.com>
Date: Thu Oct 27 16:36:40 2016 +0300
IB/mlx5: Validate requested RQT size
commit efd7f40082a0dfd112eb87ff2124467a5739216f upstream.
Validate that the requested size of RQT is supported by firmware.
Fixes: c5f9092936fe ('IB/mlx5: Add Receive Work Queue Indirection table operations')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76a93a6f8dd7ee2468fd0ccb83e2112b94a886db
Author: Matan Barak <matanb@mellanox.com>
Date: Thu Nov 10 11:30:55 2016 +0200
IB/mlx4: Fix create CQ error flow
commit 593ff73bcfdc79f79a8a0df55504f75ad3e5d1a9 upstream.
Currently, if ib_copy_to_udata fails, the CQ
won't be deleted from the radix tree and the HW (HW2SW).
Fixes: 225c7b1feef1 ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4234e6a06f8bc04679bc827a475d9daeba359761
Author: Daniel Jurgens <danielj@mellanox.com>
Date: Thu Nov 10 11:30:54 2016 +0200
IB/mlx4: Check gid_index return value
commit 37995116fecfce2b61ee3da6e73b3e394c6818f9 upstream.
Check the returned GID index value and return an error if it is invalid.
Fixes: 5070cd2239bd ('IB/mlx4: Replace mechanism for RoCE GID management')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc9275365065937944ff7cdc494af8147a7e9443
Author: Yonatan Cohen <yonatanc@mellanox.com>
Date: Wed Nov 16 10:39:17 2016 +0200
IB/rxe: Clear queue buffer when modifying QP to reset
commit aa75b07b478a774b1432e2df1be5cd8ae834de0f upstream.
RXE resets the send-q only once in rxe_qp_init_req() when
QP is created, but when the QP is reused after QP reset, the send-q
holds previous garbage data.
This garbage data wrongly fails CQEs that otherwise
should have completed successfully.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c87b4a8f6d5394990c73af07d56fcea748b1400
Author: Yonatan Cohen <yonatanc@mellanox.com>
Date: Wed Nov 16 10:39:15 2016 +0200
IB/rxe: Fix handling of erroneous WR
commit 002e062e13db10973adb8302f231e48b477c7ccf upstream.
To correctly handle a erroneous WR this fix does the following
1. Make sure the bad WQE causes a user completion event.
2. Call rxe_completer to handle the erred WQE.
Before the fix, when rxe_requester found a bad WQE, it changed its
status to IB_WC_LOC_PROT_ERR and exit with 0 for non RC QPs.
If this was the 1st WQE then there would be no ACK to invoke the
completer and this bad WQE would be stuck in the QP's send-q.
On top of that the requester exiting with 0 caused rxe_do_task to
endlessly invoke rxe_requester, resulting in a soft-lockup attached
below.
In case the WQE was not the 1st and rxe_completer did get a chance to
handle the bad WQE, it did not cause a complete event since the WQE's
IB_SEND_SIGNALED flag was not set.
Setting WQE status to IB_SEND_SIGNALED is subject to IBA spec
version 1.2.1, section 10.7.3.1 Signaled Completions.
NMI watchdog: BUG: soft lockup - CPU#7 stuck for 22s!
[<ffffffffa0590145>] ? rxe_pool_get_index+0x35/0xb0 [rdma_rxe]
[<ffffffffa05952ec>] lookup_mem+0x3c/0xc0 [rdma_rxe]
[<ffffffffa0595534>] copy_data+0x1c4/0x230 [rdma_rxe]
[<ffffffffa058c180>] rxe_requester+0x9d0/0x1100 [rdma_rxe]
[<ffffffff8158e98a>] ? kfree_skbmem+0x5a/0x60
[<ffffffffa05962c9>] rxe_do_task+0x89/0xf0 [rdma_rxe]
[<ffffffffa05963e2>] rxe_run_task+0x12/0x30 [rdma_rxe]
[<ffffffffa059110a>] rxe_post_send+0x41a/0x550 [rdma_rxe]
[<ffffffff811ef922>] ? __kmalloc+0x182/0x200
[<ffffffff816ba512>] ? down_read+0x12/0x40
[<ffffffffa054bd32>] ib_uverbs_post_send+0x532/0x540 [ib_uverbs]
[<ffffffff815f8722>] ? tcp_sendmsg+0x402/0xb80
[<ffffffffa05453dc>] ib_uverbs_write+0x18c/0x3f0 [ib_uverbs]
[<ffffffff81623c2e>] ? inet_recvmsg+0x7e/0xb0
[<ffffffff8158764d>] ? sock_recvmsg+0x3d/0x50
[<ffffffff81215b87>] __vfs_write+0x37/0x140
[<ffffffff81216892>] vfs_write+0xb2/0x1b0
[<ffffffff81217ce5>] SyS_write+0x55/0xc0
[<ffffffff816bc672>] entry_SYSCALL_64_fastpath+0x1a/0xa
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4605a0e9605540a58aaba32022c30e697a4a93f
Author: Yonatan Cohen <yonatanc@mellanox.com>
Date: Wed Nov 16 10:39:14 2016 +0200
IB/rxe: Fix kernel panic in UDP tunnel with GRO and RX checksum
commit 1454ca3a97e147bb91e98b087446c39cf6692a48 upstream.
Missing initialization of udp_tunnel_sock_cfg causes to following
kernel panic, while kernel tries to execute gro_receive().
While being there, we converted udp_port_cfg to use the same
initialization scheme as udp_tunnel_sock_cfg.
------------[ cut here ]------------
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle kernel paging request at ffffffffa0588c50
IP: [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe]
PGD 1c09067 PUD 1c0a063 PMD bb394067 PTE 80000000ad5e8163
Oops: 0011 [#1] SMP
Modules linked in: ib_rxe ip6_udp_tunnel udp_tunnel
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.7.0-rc3+ #2
Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011
task: ffff880235e4e680 ti: ffff880235e68000 task.ti: ffff880235e68000
RIP: 0010:[<ffffffffa0588c50>]
[<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe]
RSP: 0018:ffff880237343c80 EFLAGS: 00010282
RAX: 00000000dffe482d RBX: ffff8800ae330900 RCX: 000000002001b712
RDX: ffff8800ae330900 RSI: ffff8800ae102578 RDI: ffff880235589c00
RBP: ffff880237343cb0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800ae33e262
R13: ffff880235589c00 R14: 0000000000000014 R15: ffff8800ae102578
FS: 0000000000000000(0000) GS:ffff880237340000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa0588c50 CR3: 0000000001c06000 CR4: 00000000000006e0
Stack:
ffffffff8160860e ffff8800ae330900 ffff8800ae102578 0000000000000014
000000000000004e ffff8800ae102578 ffff880237343ce0 ffffffff816088fb
0000000000000000 ffff8800ae330900 0000000000000000 00000000ffad0000
Call Trace:
<IRQ>
[<ffffffff8160860e>] ? udp_gro_receive+0xde/0x130
[<ffffffff816088fb>] udp4_gro_receive+0x10b/0x2d0
[<ffffffff81611373>] inet_gro_receive+0x1d3/0x270
[<ffffffff81594e29>] dev_gro_receive+0x269/0x3b0
[<ffffffff81595188>] napi_gro_receive+0x38/0x120
[<ffffffffa011caee>] mlx5e_handle_rx_cqe+0x27e/0x340 [mlx5_core]
[<ffffffffa011d076>] mlx5e_poll_rx_cq+0x66/0x6d0 [mlx5_core]
[<ffffffffa011d7ae>] mlx5e_napi_poll+0x8e/0x400 [mlx5_core]
[<ffffffff815949a0>] net_rx_action+0x160/0x380
[<ffffffff816a9197>] __do_softirq+0xd7/0x2c5
[<ffffffff81085c35>] irq_exit+0xf5/0x100
[<ffffffff816a8f16>] do_IRQ+0x56/0xd0
[<ffffffff816a6dcc>] common_interrupt+0x8c/0x8c
<EOI>
[<ffffffff81061f96>] ? native_safe_halt+0x6/0x10
[<ffffffff81037ade>] default_idle+0x1e/0xd0
[<ffffffff8103828f>] arch_cpu_idle+0xf/0x20
[<ffffffff810c37dc>] default_idle_call+0x3c/0x50
[<ffffffff810c3b13>] cpu_startup_entry+0x323/0x3c0
[<ffffffff81050d8c>] start_secondary+0x15c/0x1a0
RIP [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe]
RSP <ffff880237343c80>
CR2: ffffffffa0588c50
---[ end trace 489ee31fa7614ac5 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception in interrupt
------------[ cut here ]------------
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04d016249998e3600233e2b3057e1a6e56e6e433
Author: Yonatan Cohen <yonatanc@mellanox.com>
Date: Wed Nov 16 10:39:18 2016 +0200
IB/rxe: Update qp state for user query
commit 6d931308f55faaef3f30bd0346c47f99528b229d upstream.
The method rxe_qp_error() transitions QP to error state
and make sure the QP is drained. It did not though update
the QP state for user's query.
This patch fixes this.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bac1543b764c535d0dd51026f54cc28f8d8adf00
Author: Namhyung Kim <namhyung@kernel.org>
Date: Tue Nov 8 22:08:33 2016 +0900
perf hists: Fix column length on --hierarchy
commit c72ab446cac1d6c9551fd26c4cfef1b2fc5041fd upstream.
Markus reported that there's a weird behavior on perf top --hierarchy
regarding the column length.
Looking at the code, I found a dubious code which affects the symptoms.
When --hierarchy option is used, the last column length might be
inaccurate since it skips to update the length on leaf entries.
I cannot remember why it did and looks like a leftover from previous
version during the development.
Anyway, updating the column length often is not harmful. So let's move
the code out.
Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 1a3906a7e6b9 ("perf hists: Resort hist entries with hierarchy")
Link: http://lkml.kernel.org/r/20161108130833.9263-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4cba876de64d448b458dd271f49c0e6a80a639ce
Author: Brian Norris <briannorris@chromium.org>
Date: Wed Nov 9 17:21:08 2016 -0800
PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails
commit 6f75c3fd56daf547d684127a7f83c283c3c160d1 upstream.
Consider two devices, A and B, where B is a child of A, and B utilizes
asynchronous suspend (it does not matter whether A is sync or async). If
B fails to suspend_noirq() or suspend_late(), or is interrupted by a
wakeup (pm_wakeup_pending()), then it aborts and sets the async_error
variable. However, device A does not (immediately) check the async_error
variable; it may continue to run its own suspend_noirq()/suspend_late()
callback. This is bad.
We can resolve this problem by doing our error and wakeup checking
(particularly, for the async_error flag) after waiting for children to
suspend, instead of before. This also helps align the logic for the noirq and
late suspend cases with the logic in __device_suspend().
It's easy to observe this erroneous behavior by, for example, forcing a
device to sleep a bit in its suspend_noirq() (to ensure the parent is
waiting for the child to complete), then return an error, and watch the
parent suspend_noirq() still get called. (Or similarly, fake a wakeup
event at the right (or is it wrong?) time.)
Fixes: de377b397272 (PM / sleep: Asynchronous threads for suspend_late)
Fixes: 28b6fd6e3779 (PM / sleep: Asynchronous threads for suspend_noirq)
Reported-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e2c8f0e7502fe8a8b6879af6bc8957b949bf1af
Author: Johan Hovold <johan@kernel.org>
Date: Tue Nov 1 11:49:56 2016 +0100
PM / sleep: fix device reference leak in test_suspend
commit ceb75787bc75d0a7b88519ab8a68067ac690f55a upstream.
Make sure to drop the reference taken by class_find_device() after
opening the RTC device.
Fixes: 77437fd4e61f (pm: boot time suspend selftest)
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd669bf2a09914ea7037302ec46985bb1eef8b4c
Author: Johan Hovold <johan@kernel.org>
Date: Tue Nov 1 12:13:31 2016 +0100
uwb: fix device reference leaks
commit d6124b409ca33c100170ffde51cd8dff761454a1 upstream.
This subsystem consistently fails to drop the device reference taken by
class_find_device().
Note that some of these lookup functions already take a reference to the
returned data, while others claim no reference is needed (or does not
seem need one).
Fixes: 183b9b592a62 ("uwb: add the UWB stack (core files)")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab17baeaea9108fc9ad22955bf8bba8ed363577f
Author: Scott Mayhew <smayhew@redhat.com>
Date: Fri Nov 11 13:16:22 2016 -0500
sunrpc: svc_age_temp_xprts_now should not call setsockopt non-tcp transports
commit ea08e39230e898844d9de5b60cdbb30067cebfe7 upstream.
This fixes the following panic that can occur with NFSoRDMA.
general protection fault: 0000 [#1] SMP
Modules linked in: rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi
scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp
scsi_tgt ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm
mlx5_ib ib_core intel_powerclamp coretemp kvm_intel kvm sg ioatdma
ipmi_devintf ipmi_ssif dcdbas iTCO_wdt iTCO_vendor_support pcspkr
irqbypass sb_edac shpchp dca crc32_pclmul ghash_clmulni_intel edac_core
lpc_ich aesni_intel lrw gf128mul glue_helper ablk_helper mei_me mei
ipmi_si cryptd wmi ipmi_msghandler acpi_pad acpi_power_meter nfsd
auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod
crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper
syscopyarea sysfillrect sysimgblt ahci fb_sys_fops ttm libahci mlx5_core
tg3 crct10dif_pclmul drm crct10dif_common
ptp i2c_core libata crc32c_intel pps_core fjes dm_mirror dm_region_hash
dm_log dm_mod
CPU: 1 PID: 120 Comm: kworker/1:1 Not tainted 3.10.0-514.el7.x86_64 #1
Hardware name: Dell Inc. PowerEdge R320/0KM5PX, BIOS 2.4.2 01/29/2015
Workqueue: events check_lifetime
task: ffff88031f506dd0 ti: ffff88031f584000 task.ti: ffff88031f584000
RIP: 0010:[<ffffffff8168d847>] [<ffffffff8168d847>]
_raw_spin_lock_bh+0x17/0x50
RSP: 0018:ffff88031f587ba8 EFLAGS: 00010206
RAX: 0000000000020000 RBX: 20041fac02080072 RCX: ffff88031f587fd8
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 20041fac02080072
RBP: ffff88031f587bb0 R08: 0000000000000008 R09: ffffffff8155be77
R10: ffff880322a59b00 R11: ffffea000bf39f00 R12: 20041fac02080072
R13: 000000000000000d R14: ffff8800c4fbd800 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff880322a40000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3c52d4547e CR3: 00000000019ba000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
20041fac02080002 ffff88031f587bd0 ffffffff81557830 20041fac02080002
ffff88031f587c78 ffff88031f587c40 ffffffff8155ae08 000000010157df32
0000000800000001 ffff88031f587c20 ffffffff81096acb ffffffff81aa37d0
Call Trace:
[<ffffffff81557830>] lock_sock_nested+0x20/0x50
[<ffffffff8155ae08>] sock_setsockopt+0x78/0x940
[<ffffffff81096acb>] ? lock_timer_base.isra.33+0x2b/0x50
[<ffffffff8155397d>] kernel_setsockopt+0x4d/0x50
[<ffffffffa0386284>] svc_age_temp_xprts_now+0x174/0x1e0 [sunrpc]
[<ffffffffa03b681d>] nfsd_inetaddr_event+0x9d/0xd0 [nfsd]
[<ffffffff81691ebc>] notifier_call_chain+0x4c/0x70
[<ffffffff810b687d>] __blocking_notifier_call_chain+0x4d/0x70
[<ffffffff810b68b6>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff815e8538>] __inet_del_ifa+0x168/0x2d0
[<ffffffff815e8cef>] check_lifetime+0x25f/0x270
[<ffffffff810a7f3b>] process_one_work+0x17b/0x470
[<ffffffff810a8d76>] worker_thread+0x126/0x410
[<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460
[<ffffffff810b052f>] kthread+0xcf/0xe0
[<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140
[<ffffffff81696418>] ret_from_fork+0x58/0x90
[<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140
Code: ca 75 f1 5d c3 0f 1f 80 00 00 00 00 eb d9 66 0f 1f 44 00 00 0f 1f
44 00 00 55 48 89 e5 53 48 89 fb e8 7e 04 a0 ff b8 00 00 02 00 <f0> 0f
c1 03 89 c2 c1 ea 10 66 39 c2 75 03 5b 5d c3 83 e2 fe 0f
RIP [<ffffffff8168d847>] _raw_spin_lock_bh+0x17/0x50
RSP <ffff88031f587ba8>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Fixes: c3d4879e ("sunrpc: Add a function to close temporary transports immediately")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c7ea73e3a9baa74473a48207af1063f0f6f57de
Author: Johan Hovold <johan@kernel.org>
Date: Tue Nov 1 11:38:18 2016 +0100
mfd: core: Fix device reference leak in mfd_clone_cell
commit 722f191080de641f023feaa7d5648caf377844f5 upstream.
Make sure to drop the reference taken by bus_find_device_by_name()
before returning from mfd_clone_cell().
Fixes: a9bbba996302 ("mfd: add platform_device sharing support for mfd")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 545ea4003db9b73a5d29a4dd0d140382a8de85bd
Author: Sara Sharon <sara.sharon@intel.com>
Date: Sun Oct 9 17:34:24 2016 +0300
iwlwifi: mvm: wake the wait queue when the RX sync counter is zero
commit 3a732c65de427fdae67a243fd331356034b5a1e8 upstream.
When we sync the RX queues the driver waits to receive echo
notification on all the RX queues.
The wait queue is set with timeout until all queues have received
the notification.
However, iwl_mvm_rx_queue_notif() never woke up the wait queue,
with the result of the counter value being checked only when the
timeout expired.
This may cause a latency of up to 1 second.
Fixes: 0636b938214c ("iwlwifi: mvm: implement driver RX queues sync command")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8bfaf856695b82abd92d77a50b507661c6960e34
Author: Luca Coelho <luciano.coelho@intel.com>
Date: Wed Oct 5 11:24:12 2016 +0300
iwlwifi: mvm: fix d3_test with unified D0/D3 images
commit 85cd69b8f1f7e289fe931a82889e673fd0f04842 upstream.
When a unified D0/D3 image is used, we don't restart the FW in the
D0->D3->D0 transitions. Therefore, the d3_test functionality should
not call ieee8021_restart_hw() when the resuming either.
Fixes: commit 23ae61282b88 ("iwlwifi: mvm: Do not switch to D3 image on suspend")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cdfd32398b59150a1c5c4b660c7fe4396d14200
Author: Luca Coelho <luciano.coelho@intel.com>
Date: Wed Oct 5 09:28:53 2016 +0300
iwlwifi: mvm: fix netdetect starting/stopping for unified images
commit 5a143db8c4a28dab6423cb6197e9f1389da375f2 upstream.
With unified images, we need to make sure the net-detect scan is
stopped after resuming, since we don't restart the FW. Also, we need
to make sure we check if there are enough scan slots available to run
it, as we do with other scans.
Fixes: commit 23ae61282b88 ("iwlwifi: mvm: Do not switch to D3 image on suspend")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e3324dc039c10fb3add341bdb407ad20f2edcf7
Author: Johannes Berg <johannes.berg@intel.com>
Date: Thu Sep 22 10:31:41 2016 +0200
iwlwifi: pcie: mark command queue lock with separate lockdep class
commit faead41cc7213ccef5a58c1bf518ac24816fe8a6 upstream.
Emmanuel reports that when CMD_WANT_ASYNC_CALLBACK is used by mvm,
the callback will be called with the command queue lock held, and
mvm will try to stop all (other) TX queues, which acquires their
locks - this caused a false lockdep recursive locking report.
Suppress this report by marking the command queue lock with a new,
separate, lock class so lockdep can tell the difference between
the two types of queues.
Fixes: 156f92f2b471 ("iwlwifi: block the queues when we send ADD_STA for uAPSD")
Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b822907865cc01c9debf8dfd52268112a9f53a9f
Author: Luca Coelho <luciano.coelho@intel.com>
Date: Thu Oct 13 10:07:07 2016 +0300
iwlwifi: pcie: fix SPLC structure parsing
commit e0d9727c111a5917a1184c71c1a8e6f78c7fc41d upstream.
The SPLC data parsing is too restrictive and was not trying find the
correct element for WiFi. This causes problems with some BIOSes where
the SPLC method exists, but doesn't have a WiFi entry on the first
element of the list. The domain type values are also incorrect
according to the specification.
Fix this by complying with the actual specification.
Additionally, replace all occurrences of SPLX to SPLC, since SPLX is
only a structure internal to the ACPI tables, and may not even exist.
Fixes: bcb079a14d75 ("iwlwifi: pcie: retrieve and parse ACPI power limitations")
Reported-by: Chris Rorvick <chris@rorvick.com>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit edb60ee4bc6546839ca0ee71c90d1b9c526e153c
Author: Lokesh Vutla <lokeshvutla@ti.com>
Date: Thu Oct 27 11:27:25 2016 +0530
rtc: omap: Fix selecting external osc
commit 3984903a2e3906d3def220e688040ce93368200a upstream.
RTC can be clocked from an external 32KHz oscillator, or from the
Peripheral PLL. The RTC has an internal oscillator buffer to support
direct operation with a crystal.
----------------------------------------
| Device --------- |
| | | |
| | RTCSS | |
| --------- | | |
OSC |<------| RTC | | | |
|------>| OSC |--- | | |
| -------- | | | |
| ----|clk | |
| -------- | | | |
| | PRCM |--- | | |
| -------- -------- |
----------------------------------------
The RTC functional clock is sourced by default from the clock derived
from the Peripheral PLL. In order to select source as external osc clk
the following changes needs to be done:
- Enable the RTC OSC (RTC_OSC_REG[4]OSC32K_GZ = 0)
- Enable the clock mux(RTC_OSC_REG[6]K32CLK_EN = 1)
- Select the external clock source (RTC_OSC_REG[3]32KCLK_SEL = 1)
Fixes: 399cf0f63f6f2 ("rtc: omap: Add external clock enabling support")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f95e68daae39717df995c430f0ebc9ac51544bb
Author: Emil Lundmark <emil@limesaudio.com>
Date: Wed Oct 12 12:31:40 2016 +0200
clk: imx: fix integer overflow in AV PLL round rate
commit 5c2f117a22e46a4afee6ddee29b653a7a2a6b41f upstream.
Since 'parent_rate * mfn' may overflow 32 bits, the result should be
stored using 64 bits.
The problem was discovered when trying to set the rate of the audio PLL
(pll4_post_div) on an i.MX6Q. The desired rate was 196.608 MHz, but
the actual rate returned was 192.000570 MHz. The round rate function should
have been able to return 196.608 MHz, i.e., the desired rate.
Fixes: ba7f4f557eb6 ("clk: imx: correct AV PLL rate formula")
Cc: Anson Huang <b20788@freescale.com>
Signed-off-by: Emil Lundmark <emil@limesaudio.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fec43900c9b7607989a02dadc77cf57f483d9d2a
Author: Wei Yongjun <weiyongjun1@huawei.com>
Date: Sat Sep 17 15:54:13 2016 +0000
clk: mmp: mmp2: fix return value check in mmp2_clk_init()
commit a29e52a6e66f4c0c895e7083e4bad2e7957f1fb5 upstream.
Fix the retrn value check which testing the wrong variable
in mmp2_clk_init().
Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63465eaf7b2ed6d72767bb1ec2273cacd33d2c31
Author: Wei Yongjun <weiyongjun1@huawei.com>
Date: Sat Sep 17 15:54:28 2016 +0000
clk: mmp: pxa168: fix return value check in pxa168_clk_init()
commit deab07261d54b4db7b627d38e0efac97f176c6d6 upstream.
Fix the retrn value check which testing the wrong variable
in pxa168_clk_init().
Fixes: ab08aefcd12d ("clk: mmp: add pxa168 DT support for clock driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a42bbd552dede523701c9d940654d37ce55d979e
Author: Wei Yongjun <weiyongjun1@huawei.com>
Date: Sat Sep 17 15:55:56 2016 +0000
clk: mmp: pxa910: fix return value check in pxa910_clk_init()
commit 10f2bfb092e3b49000526c02cfe8b2abbbdbb752 upstream.
Fix the retrn value check which testing the wrong variable
in pxa910_clk_init().
Fixes: 2bc61da9f7ff ("clk: mmp: add pxa910 DT support for clock driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb6c9ec826be6e7194b7cf6fd2e4fcb7f3f4bd5e
Author: Michael S. Tsirkin <mst@redhat.com>
Date: Fri Nov 4 12:55:36 2016 +0200
virtio-net: drop legacy features in virtio 1 mode
commit f3358507c11999c91abf54744658bccd49b5879c upstream.
Virtio 1.0 spec says VIRTIO_F_ANY_LAYOUT and VIRTIO_NET_F_GSO are
legacy-only feature bits. Do not negotiate them in virtio 1 mode. Note
this is a spec violation so we need to backport it to stable/downstream
kernels.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 899f5426eebf63e75b8e328155260883524ab344
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri Nov 11 19:14:24 2016 +0200
drm/i915: Assume non-DP++ port if dvo_port is HDMI and there's no AUX ch specified in the VBT
commit bc9db5ad3253c8e17969bd802c47b73e63f125ab upstream.
My heuristic for detecting type 1 DVI DP++ adaptors based on the VBT
port information apparently didn't survive the reality of buggy VBTs.
In this particular case we have a machine with a natice HDMI port, but
the VBT tells us it's a DP++ port based on its capabilities.
The dvo_port information in VBT does claim that we're dealing with a
HDMI port though, but we have other machines which do the same even
when they actually have DP++ ports. So that piece of information alone
isn't sufficient to tell the two apart.
After staring at a bunch of VBTs from various machines, I have to
conclude that the only other semi-reliable clue we can use is the
presence of the AUX channel in the VBT. On this particular machine
AUX channel is specified as zero, whereas on some of the other machines
which listed the DP++ port as HDMI have a non-zero AUX channel.
I've also seen VBTs which have dvo_port a DP but have a zero AUX
channel. I believe those we need to treat as DP ports, so we'll limit
the AUX channel check to just the cases where dvo_port is HDMI.
If we encounter any more serious failures with this heuristic I think
we'll have to have to throw it out entirely. But that could mean that
there is a risk of type 1 DVI dongle users getting greeted by a
black screen, so I'd rather not go there unless absolutely necessary.
v2: Remove the duplicate PORT_A check (Daniel)
Fix some typos in the commit message
Cc: Daniel Otero <daniel.otero@outlook.com>
Tested-by: Daniel Otero <daniel.otero@outlook.com>
Fixes: d61992565bd3 ("drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97994
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478884464-14251-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 7a17995a3dc8613f778a9e2fd20e870f17789544)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6920e5069922618e316cc41bade636fd1186c61
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri Oct 21 16:44:38 2016 +0300
drm/i915: Refresh that status of MST capable connectors in ->detect()
commit fc22b787890f9f9067fd130feec42297a4ee62ba upstream.
Once we've determined that the sink is MST capable we never end up
running through the full detect cycle again, despite getting HPDs.
Fix tht by ripping out the incorrect piece of code responsible.
This got broken when I moved the long HPD handling to the ->detect()
hook, but failed to remove the leftover code.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Cc: Rui Tiago Matos <tiagomatos@gmail.com>
Tested-by: Rui Tiago Matos <tiagomatos@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98323
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
References: https://bugs.freedesktop.org/show_bug.cgi?id=98306
Fixes: 1015811609c0 ("drm/i915: Move long hpd handling into the hotplug work")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477057478-29328-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 1aab956c7b8872fb6976328316bfad62c6e67cf8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56a02a5f60ea91a3f21164a47188835b4b77ed29
Author: Mario Kleiner <mario.kleiner.de@gmail.com>
Date: Wed Nov 9 02:25:15 2016 +0100
drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)
commit 8e94a46c1770884166b31adc99eba7da65a446a7 upstream.
External clients which import our bo's wait only
for exclusive dmabuf-fences, not on shared ones,
ditto for bo's which we import from external
providers and write to.
Therefore attach exclusive fences on prime shared buffers
if our exported buffer gets imported by an external
client, or if we import a buffer from an external
exporter.
See discussion in thread:
https://lists.freedesktop.org/archives/dri-devel/2016-October/122370.html
Prime export tested on Intel iGPU + AMD Tonga dGPU as
DRI3/Present Prime render offload, and with the Tonga
standalone as primary gpu.
v2: Add a wait for all shared fences before prime export,
as suggested by Christian Koenig.
v3: - Mark buffer prime_exported in amdgpu_gem_prime_pin,
so we only use the exclusive fence when exporting a
bo to external clients like a separate iGPU, but not
when exporting/importing from/to ourselves as part of
regular DRI3 fd passing.
- Propagate failure of reservation_object_wait_rcu back
to caller.
v4: - Switch to a prime_shared_count counter instead of a
flag, which gets in/decremented on prime_pin/unpin, so
we can switch back to shared fences if all clients
detach from our exported bo.
- Also switch to exclusive fence for prime imported bo's.
v5: - Drop lret, instead use int ret -> long ret, as proposed
by Christian.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95472
Tested-by: Mike Lothian <mike@fireburn.co.uk> (v1)
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3eac4767dd7ec81e2ecc6d9a039b7d5b3a811ad6
Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue Nov 15 15:28:33 2016 +1100
powerpc/64: Fix setting of AIL in hypervisor mode
commit c0a36013639b06760f7c2c21a8387eac855432e1 upstream.
Commit d3cbff1b5 "powerpc: Put exception configuration in a common place"
broke the setting of the AIL bit (which enables taking exceptions with
the MMU still on) on all processors, moving it incorrectly to a function
called only on the boot CPU. This was correct for the guest case but
not when running in hypervisor mode.
This fixes it by partially reverting that commit, putting the setting
back in cpu_ready_for_interrupts()
Fixes: d3cbff1b5a90 ("powerpc: Put exception configuration in a common place")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc312878ffe36d76c265ac0588393f823b65033e
Author: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Date: Mon Nov 7 18:51:34 2016 +0100
crypto: caam - do not register AES-XTS mode on LP units
commit 83d2c9a9c17b1e9f23a3a0c24c03cd18e4b02520 upstream.
When using AES-XTS on a Wandboard, we receive a Mode error:
caam_jr 2102000.jr1: 20001311: CCB: desc idx 19: AES: Mode error.
According to the Security Reference Manual, the Low Power AES units
of the i.MX6 do not support the XTS mode. Therefore we must not
register XTS implementations in the Crypto API.
Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: c6415a6016bf "crypto: caam - add support for acipher xts(aes)"
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
commit 54f28973e8a50af7a61e113ae2769a915526725d
Author: Fabio Estevam <fabio.estevam@nxp.com>
Date: Thu Oct 27 13:06:44 2016 -0200
ARM: dts: imx53-qsb: Fix regulator constraints
commit e3c9d9d6ebfeeeee29c6240e1b5978d40d31d21f upstream.
Since commit fa93fd4ecc9c ("regulator: core: Ensure we are at least in
bounds for our constraints") the imx53-qsb board populated with a Dialog
DA9053 PMIC fails to boot:
LDO3: Bringing 3300000uV into 1800000-1800000uV
The LDO3 voltage constraints passed in the device tree do not match
the valid range according to the datasheet, so fix this accordingly to
allow the board booting again.
While at it, fix the other voltage constraints as well.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7001b98b9dced1acccc5956fba7318bc3b21fd0e
Author: Theodore Ts'o <tytso@mit.edu>
Date: Fri Nov 18 13:00:24 2016 -0500
ext4: sanity check the block and cluster size at mount time
commit 8cdf3372fe8368f56315e66bea9f35053c418093 upstream.
If the block size or cluster size is insane, reject the mount. This
is important for security reasons (although we shouldn't be just
depending on this check).
Ref: http://www.securityfocus.com/archive/1/539661
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56df604296c2b6f785e627681757949a461b3a34
Author: Borislav Petkov <bp@suse.de>
Date: Mon Nov 14 19:41:31 2016 +0100
kbuild: Steal gcc's pie from the very beginning
commit c6a385539175ebc603da53aafb7753d39089f32e upstream.
So Sebastian turned off the PIE for kernel builds but that was too late
- Kbuild.include already uses KBUILD_CFLAGS and trying to disable gcc
options with, say cc-disable-warning, fails:
gcc -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs
...
-Wno-sign-compare -fno-asynchronous-unwind-tables -Wframe-address -c -x c /dev/null -o .31392.tmp
/dev/null:1:0: error: code model kernel does not support PIC mode
because that returns an error and we can't disable the warning. For
example in this case:
KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,)
which leads to gcc issuing all those warnings again.
So let's turn off PIE/PIC at the earliest possible moment, when we
declare KBUILD_CFLAGS so that cc-disable-warning picks it up too.
Also, we need the $(call cc-option ...) because -fno-PIE is supported
since gcc v3.4 and our lowest supported gcc version is 3.2 right now.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e14754cb8f0cbd32db8239fcf5f4e15b17ae9444
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Nov 4 19:39:40 2016 +0100
x86/kexec: add -fno-PIE
commit 90944e40ba1838de4b2a9290cf273f9d76bd3bdd upstream.
If the gcc is configured to do -fPIE by default then the build aborts
later with:
| Unsupported relocation type: unknown type rel type name (29)
Tagging it stable so it is possible to compile recent stable kernels as
well.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad4e2f324adec03341094acc54f9e20f1451923d
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Nov 4 19:39:39 2016 +0100
scripts/has-stack-protector: add -fno-PIE
commit 82031ea29e454b574bc6f49a33683a693ca5d907 upstream.
Adding -no-PIE to the fstack protector check. -no-PIE was introduced
before -fstack-protector so there is no need for a runtime check.
Without it the build stops:
|Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong available but compiler is broken
due to -mcmodel=kernel + -fPIE if -fPIE is enabled by default.
Tagging it stable so it is possible to compile recent stable kernels as
well.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c7727d0bca0c620850834d8e4913a1f5bdc6cb7
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Nov 4 19:39:38 2016 +0100
kbuild: add -fno-PIE
commit 8ae94224c9d72fc4d9aaac93b2d7833cf46d7141 upstream.
Debian started to build the gcc with -fPIE by default so the kernel
build ends before it starts properly with:
|kernel/bounds.c:1:0: error: code model kernel does not support PIC mode
Also add to KBUILD_AFLAGS due to:
|gcc -Wp,-MD,arch/x86/entry/vdso/vdso32/.note.o.d … -mfentry -DCC_USING_FENTRY … vdso/vdso32/note.S
|arch/x86/entry/vdso/vdso32/note.S:1:0: sorry, unimplemented: -mfentry isn’t supported for 32-bit in combination with -fpic
Tagging it stable so it is possible to compile recent stable kernels as
well.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20bcbe24693359b3ecb64366f0dc0368498915d7
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed Oct 12 10:23:41 2016 -0700
Disable the __builtin_return_address() warning globally after all
commit ef6000b4c6706cbb1787836442b5a74542b1809f upstream.
This affectively reverts commit 377ccbb48373 ("Makefile: Mute warning
for __builtin_return_address(>0) for tracing only") because it turns out
that it really isn't tracing only - it's all over the tree.
We already also had the warning disabled separately for mm/usercopy.c
(which this commit also removes), and it turns out that we will also
want to disable it for get_lock_parent_ip(), that is used for at least
TRACE_IRQFLAGS. Which (when enabled) ends up being all over the tree.
Steven Rostedt had a patch that tried to limit it to just the config
options that actually triggered this, but quite frankly, the extra
complexity and abstraction just isn't worth it. We have never actually
had a case where the warning is actually useful, so let's just disable
it globally and not worry about it.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 504b60516ba796e1b73a16b3fe3520ce73935401
Author: Alex Hemme <ahemme@cisco.com>
Date: Sat Nov 19 10:48:38 2016 +0100
i2c: i2c-mux-pca954x: fix deselect enabling for device-tree
commit ad092de60f865c1ad94221bd06d381ecea446cc8 upstream.
Deselect functionality can be ignored for device-trees with
"i2c-mux-idle-disconnect" entries if no platform_data is available.
By enabling the deselect functionality outside the platform_data
block the logic works as it did in previous kernels.
Fixes: 7fcac9807175 ("i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core")
Signed-off-by: Alex Hemme <ahemme@cisco.com>
Signed-off-by: Ziyang Wu <ziywu@cisco.com>
[touched up a few minor issues /peda]
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45244660281c9a5b802e2e0ea012c7955a76741e
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Mon Nov 14 15:34:17 2016 +0100
i2c: mux: fix up dependencies
commit 93d710a65ef02fb7fd48ae207e78f460bd7a6089 upstream.
We get the following build error from UM Linux after adding
an entry to drivers/iio/gyro/Kconfig that issues "select I2C_MUX":
ERROR: "devm_ioremap_resource"
[drivers/i2c/muxes/i2c-mux-reg.ko] undefined!
ERROR: "of_address_to_resource"
[drivers/i2c/muxes/i2c-mux-reg.ko] undefined!
It appears that the I2C mux core code depends on HAS_IOMEM
for historical reasons, while CONFIG_I2C_MUX_REG does *not*
have a direct dependency on HAS_IOMEM.
This creates a situation where a allyesconfig or allmodconfig
for UM Linux will select I2C_MUX, and will implicitly enable
I2C_MUX_REG as well, and the compilation will fail for the
register driver.
Fix this up by making I2C_MUX_REG depend on HAS_IOMEM and
removing the dependency from I2C_MUX.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Jonathan Cameron <jic23@jic23.retrosnub.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce97f5012b6d1c42507116bc62bdb61763cd3986
Author: Takashi Iwai <tiwai@suse.de>
Date: Fri Nov 11 12:33:20 2016 +0100
ALSA: hda - Fix mic regression by ASRock mobo fixup
commit 9a2541910dc7eaaa6859eea8a0ffda673059a623 upstream.
The commit [1a3f099101b8: ALSA: hda - Fix surround output pins for
ASRock B150M mobo] introduced a fixup of pin configs for ASRock
mobos to fix the surround outputs. However, this overrides the pin
configs of the mic pins as if they are outputs-only, effectively
disabling the mic inputs. Of course, it's a regression wrt mic
functionality.
Actually the pins 0x18 and 0x1a don't need to be changed; we just need
to disable the bogus pins 0x14 and 0x15. Then the auto-parser will
pick up mic pins as switchable and assign the surround outputs there.
This patch removes the incorrect pin overrides of NID 0x18 and 0x1a
from the ASRock fixup.
Fixes: 1a3f099101b8 ('ALSA: hda - Fix surround output pins for ASRock...')
Reported-and-tested-by: Vitor Antunes <vitor.hda@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=187431
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23e14ee1abcf22341f8c235400a055829d21a343
Author: Hui Wang <hui.wang@canonical.com>
Date: Thu Nov 10 13:20:05 2016 +0800
ALSA: hda - add a new condition to check if it is thinkpad
commit 2ecb704a1290edb5e3d53a75529192e7ed2a1a28 upstream.
Latest Thinkpad laptops use the HKEY_HID LEN0268 instead of the
LEN0068, as a result neither audio mute led nor mic mute led can work
any more.
After adding the new HKEY_HID into the is_thinkpad(), both of them
works well as before.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85fcb62a58b281e3bed60ecdc34d1559ba06c9c1
Author: Takashi Iwai <tiwai@suse.de>
Date: Mon Nov 14 21:46:47 2016 +0100
ALSA: usb-audio: Fix use-after-free of usb_device at disconnect
commit 6ff1a25318ebf688ef9593fe09cd449f6fb4ad31 upstream.
The usb-audio driver implements the deferred device disconnection for
the device in use. In this mode, the disconnection callback returns
immediately while the actual ALSA card object removal happens later
when all files get closed. As Shuah reported, this code flow,
however, leads to a use-after-free, detected by KASAN:
BUG: KASAN: use-after-free in snd_usb_audio_free+0x134/0x160 [snd_usb_audio] at addr ffff8801c863ce10
Write of size 8 by task pulseaudio/2244
Call Trace:
[<ffffffff81b31473>] dump_stack+0x67/0x94
[<ffffffff81564ef1>] kasan_object_err+0x21/0x70
[<ffffffff8156518a>] kasan_report_error+0x1fa/0x4e0
[<ffffffff81564ad7>] ? kasan_slab_free+0x87/0xb0
[<ffffffff81565733>] __asan_report_store8_noabort+0x43/0x50
[<ffffffffa0fc0f54>] ? snd_usb_audio_free+0x134/0x160 [snd_usb_audio]
[<ffffffffa0fc0f54>] snd_usb_audio_free+0x134/0x160 [snd_usb_audio]
[<ffffffffa0fc0fb1>] snd_usb_audio_dev_free+0x31/0x40 [snd_usb_audio]
[<ffffffff8243c78a>] __snd_device_free+0x12a/0x210
[<ffffffff8243d1f5>] snd_device_free_all+0x85/0xd0
[<ffffffff8242cae4>] release_card_device+0x34/0x130
[<ffffffff81ef1846>] device_release+0x76/0x1e0
[<ffffffff81b37ad7>] kobject_release+0x107/0x370
.....
Object at ffff8801c863cc80, in cache kmalloc-2048 size: 2048
Allocated:
[<ffffffff810804eb>] save_stack_trace+0x2b/0x50
[<ffffffff81564296>] save_stack+0x46/0xd0
[<ffffffff8156450d>] kasan_kmalloc+0xad/0xe0
[<ffffffff81560d1a>] kmem_cache_alloc_trace+0xfa/0x240
[<ffffffff8214ea47>] usb_alloc_dev+0x57/0xc90
[<ffffffff8216349d>] hub_event+0xf1d/0x35f0
....
Freed:
[<ffffffff810804eb>] save_stack_trace+0x2b/0x50
[<ffffffff81564296>] save_stack+0x46/0xd0
[<ffffffff81564ac1>] kasan_slab_free+0x71/0xb0
[<ffffffff81560929>] kfree+0xd9/0x280
[<ffffffff8214de6e>] usb_release_dev+0xde/0x110
[<ffffffff81ef1846>] device_release+0x76/0x1e0
....
It's the code trying to clear drvdata of the assigned usb_device where
the usb_device itself was already released in usb_release_dev() after
the disconnect callback.
This patch fixes it by checking whether the code path is via the
disconnect callback, i.e. chip->shutdown flag is set.
Fixes: 79289e24194a ('ALSA: usb-audio: Refer to chip->usb_id for quirks...')
Reported-and-tested-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e902f10da218c4af481337ed2a090c9bdf739630
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Sat Nov 12 15:01:09 2016 +0100
gpio: do not double-check direction on sleeping chips
commit 60f8339eb388df8a46f8eb4282ff0e15f08f218c upstream.
When locking a GPIO line as IRQ, we go to lengths to
double-check that the line is really set as input before
marking it as used for IRQ. This is not good on GPIO chips
that can sleep, because this function is called in IRQ-safe
context. Just skip this if it can't be checked quickly.
Currently this happens on sleeping expanders such as STMPE
or TC3589x:
BUG: scheduling while atomic: swapper/1/0x00000002
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.9.0-rc1+ #38
Hardware name: Nomadik STn8815
[<c000f2e0>] (unwind_backtrace) from [<c000d244>] (show_stack+0x10/0x14)
[<c000d244>] (show_stack) from [<c0037b78>] (__schedule_bug+0x54/0x80)
[<c0037b78>] (__schedule_bug) from [<c042df14>] (__schedule+0x3a0/0x460)
[<c042df14>] (__schedule) from [<c042e028>] (schedule+0x54/0xb8)
(...)
This patch fixes that problem and relies on the direction
read from the chip when it was added.
Fixes: 9c10280d85c1 ("gpio: flush direction status in gpiochip_lock_as_irq()")
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b21b327d96bcfdd45ac22f2a55115291cf0fb6c4
Author: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Mon Oct 24 21:11:26 2016 +0200
can: bcm: fix warning in bcm_connect/proc_register
commit deb507f91f1adbf64317ad24ac46c56eeccfb754 upstream.
Andrey Konovalov reported an issue with proc_register in bcm.c.
As suggested by Cong Wang this patch adds a lock_sock() protection and
a check for unsuccessful proc_create_data() in bcm_connect().
Reference: http://marc.info/?l=linux-netdev&m=147732648731237
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50e6cd2feff75eedcfaa0a23be6f08fe8410aab0
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Tue Nov 1 10:22:53 2016 +0100
mfd: stmpe: Fix RESET regression on STMPE2401
commit f40584200bc4af7aa4399635b9ac213c62a13ae7 upstream.
Since commit c4dd1ba355aae2bc3d1213da6c66c53e3c31e028
("mfd: stmpe: Add reset support for all STMPE variant")
we're resetting the STMPE expanders before use.
This caused a regression on the STMP2401 on the Nomadik
NHK8815:
stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101
nmk-i2c 101f8000.i2c0: write to slave 0x43 timed out
nmk-i2c 101f8000.i2c0: no ack received after address transmission
stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101
nmk-i2c 101f8000.i2c0: write to slave 0x44 timed out
nmk-i2c 101f8000.i2c0: no ack received after address transmission
It turns out that we start to poll for the reset bit to
go low again too quickly: the STMPE2401 is not yet online and
ready to be asked for the status of the RESET bit.
By introducing a 10ms delay before starting to hammer
the register for information, we get back to normal:
stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101
stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Fixes: c4dd1ba355aa ("mfd: stmpe: Add reset support for all STMPE variant")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e015527c6fbdf9778853c91a0307aadc83be80eb
Author: Azhar Shaikh <azhar.shaikh@intel.com>
Date: Wed Oct 12 10:12:20 2016 -0700
mfd: intel-lpss: Do not put device in reset state on suspend
commit 274e43edcda6f709aa67e436b3123e45a6270923 upstream.
Commit 41a3da2b8e163 ("mfd: intel-lpss: Save register context on
suspend") saved the register context while going to suspend and
also put the device in reset state.
Due to the resetting of device, system cannot enter S3/S0ix
states when no_console_suspend flag is enabled. The system
and serial console both hang. The resetting of device is not
needed while going to suspend. Hence remove this code.
Fixes: 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend")
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b4d44f46bf22c7b77fdc91ed668c50261f9b536
Author: Ira Weiny <ira.weiny@intel.com>
Date: Mon Oct 17 04:20:09 2016 -0700
IB/hfi1: Fix rnr_timer addition
commit 458ed666fe14a54dfb6690a1a7f541782d1342c9 upstream.
The new s_rnr_timeout was not properly being set and the code was
incorrectly setting a different timer.
Found by code inspection.
Fixes: 08279d5c9424 ("staging/rdma/hfi1: use new RNR timer")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06eac15f11e014e471f1486fa47817d3a3697b4d
Author: Dennis Dalessandro <dennis.dalessandro@intel.com>
Date: Mon Oct 10 06:14:45 2016 -0700
IB/rdmavt: rdmavt can handle non aligned page maps
commit e1fafdcbe0e3e769c6a83317dd845bc99b4fe61d upstream.
The initial code for rdmavt carried with it a restriction that was a
vestige from the qib driver, that to dma map a page it had to be less
than a page size. This is not the case on modern hardware, both qib and
hfi1 will be just fine with unaligned map requests.
This fixes a 4.8 regression where by an IPoIB transfer of > PAGE_SIZE
will hang because the dma map page call always fails. This was
introduced after commit 5faba5469522 ("IB/ipoib: Report SG feature
regardless of HW UD CSUM capability") added the capability to use SG by
default. Rather than override this, the HW supports it, so allow SG.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca720a2b11b4c90d1798b406d3c191cd5395b5e3
Author: Miklos Szeredi <mszeredi@redhat.com>
Date: Thu Aug 18 09:10:44 2016 +0200
fuse: fix fuse_write_end() if zero bytes were copied
commit 59c3b76cc61d1d676f965c192cc7969aa5cb2744 upstream.
If pos is at the beginning of a page and copied is zero then page is not
zeroed but is marked uptodate.
Fix by skipping everything except unlock/put of page if zero bytes were
copied.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 6b12c1b37e55 ("fuse: Implement write_begin/write_end callbacks")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de58c50e84e27ede34b509ad900414e43da5721a
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Mon Nov 7 19:57:00 2016 +0100
genirq: Use irq type from irqdata instead of irqdesc
commit 7ee7e87dfb158e79019ea1d5ea1b0e6f2bc93ee4 upstream.
The type flags in the irq descriptor are there for historical reasons and
only updated via irq_modify_status() or irq_set_type(). Both functions also
update the type flags in irqdata. __setup_irq() is the only left over user
of the type flags in the irq descriptor.
If __setup_irq() is called with empty irq type flags, then the type flags
are retrieved from irqdata. If an interrupt is shared, then the type flags
are compared with the type flags stored in the irq descriptor.
On x86 the ioapic does not have a irq_set_type() callback because the type
is defined in the BIOS tables and cannot be changed. The type is stored in
irqdata at setup time without updating the type data in the irq
descriptor. As a result the comparison described above fails.
There is no point in updating the irq descriptor flags because the only
relevant storage is irqdata. Use the type flags from irqdata for both
retrieval and comparison in __setup_irq() instead.
Aside of that the print out in case of non matching type flags has the old
and new type flags arguments flipped. Fix that as well.
For correctness sake the flags stored in the irq descriptor should be
removed, but this is beyond the scope of this bugfix and will be done in a
later patch.
Fixes: 4b357daed698 ("genirq: Look-up trigger type if not specified by caller")
Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611072020360.3501@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8844024c883972fe9ce983a60cd9cc55cfb073ae
Author: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
Date: Mon Nov 14 16:31:49 2016 -0500
ftrace: Add more checks for FTRACE_FL_DISABLED in processing ip records
commit 546fece4eae871f033925ccf0ff2b740725ae915 upstream.
When a module is first loaded and its function ip records are added to the
ftrace list of functions to modify, they are set to DISABLED, as their text
is still in a read only state. When the module is fully loaded, and can be
updated, the flag is cleared, and if their's any functions that should be
tracing them, it is updated at that moment.
But there's several locations that do record accounting and should ignore
records that are marked as disabled, or they can cause issues.
Alexei already fixed one location, but others need to be addressed.
Fixes: b7ffffbb46f2 "ftrace: Add infrastructure for delayed enabling of module functions"
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5d20ce0b459b6e2d00f58b599543eb0e8e725e4
Author: Alexei Starovoitov <ast@fb.com>
Date: Mon Nov 7 15:14:20 2016 -0800
ftrace: Ignore FTRACE_FL_DISABLED while walking dyn_ftrace records
commit 977c1f9c8c022d0173181766b34a0db3705265a4 upstream.
ftrace_shutdown() checks for sanity of ftrace records
and if dyn_ftrace->flags is not zero, it will warn.
It can happen that 'flags' are set to FTRACE_FL_DISABLED at this point,
since some module was loaded, but before ftrace_module_enable()
cleared the flags for this module.
In other words the module.c is doing:
ftrace_module_init(mod); // calls ftrace_update_code() that sets flags=FTRACE_FL_DISABLED
... // here ftrace_shutdown() is called that warns, since
err = prepare_coming_module(mod); // didn't have a chance to clear FTRACE_FL_DISABLED
Fix it by ignoring disabled records.
It's similar to what __ftrace_hash_rec_update() is already doing.
Link: http://lkml.kernel.org/r/1478560460-3818619-1-git-send-email-ast@fb.com
Fixes: b7ffffbb46f2 "ftrace: Add infrastructure for delayed enabling of module functions"
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f271087fb2ea6eb4352340893225655f6ab491d0
Author: Wei Huang <wei@redhat.com>
Date: Wed Nov 16 11:09:20 2016 -0600
KVM: arm64: Fix the issues when guest PMCCFILTR is configured
commit b112c84a6ff035271d41d548c10215f18443d6a6 upstream.
KVM calls kvm_pmu_set_counter_event_type() when PMCCFILTR is configured.
But this function can't deals with PMCCFILTR correctly because the evtCount
bits of PMCCFILTR, which is reserved 0, conflits with the SW_INCR event
type of other PMXEVTYPER<n> registers. To fix it, when eventsel == 0, this
function shouldn't return immediately; instead it needs to check further
if select_idx is ARMV8_PMU_CYCLE_IDX.
Another issue is that KVM shouldn't copy the eventsel bits of PMCCFILTER
blindly to attr.config. Instead it ought to convert the request to the
"cpu cycle" event type (i.e. 0x11).
To support this patch and to prevent duplicated definitions, a limited
set of ARMv8 perf event types were relocated from perf_event.c to
asm/perf_event.h.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d8b37e242decffb789cd86f501100dd881ded10
Author: Wei Huang <wei@redhat.com>
Date: Wed Nov 16 09:20:57 2016 +0000
arm64: KVM: pmu: Fix AArch32 cycle counter access
commit 9e3f7a29694049edd728e2400ab57ad7553e5aa9 upstream.
We're missing the handling code for the cycle counter accessed
from a 32bit guest, leading to unexpected results.
Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cb9b2489e778b4f0d97a98ef35be00b2498d94d
Author: Ignacio Alvarado <ikalvarado@google.com>
Date: Fri Nov 4 12:15:55 2016 -0700
KVM: Disable irq while unregistering user notifier
commit 1650b4ebc99da4c137bfbfc531be4a2405f951dd upstream.
Function user_notifier_unregister should be called only once for each
registered user notifier.
Function kvm_arch_hardware_disable can be executed from an IPI context
which could cause a race condition with a VCPU returning to user mode
and attempting to unregister the notifier.
Signed-off-by: Ignacio Alvarado <ikalvarado@google.com>
Fixes: 18863bdd60f8 ("KVM: x86 shared msr infrastructure")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23555ca21394c0f5a146c891128bd4edc3e78862
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu Nov 17 15:55:46 2016 +0100
KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr
commit 7301d6abaea926d685832f7e1f0c37dd206b01f4 upstream.
Reported by syzkaller:
[ INFO: suspicious RCU usage. ]
4.9.0-rc4+ #47 Not tainted
-------------------------------
./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage!
stack backtrace:
CPU: 1 PID: 6679 Comm: syz-executor Not tainted 4.9.0-rc4+ #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
ffff880039e2f6d0 ffffffff81c2e46b ffff88003e3a5b40 0000000000000000
0000000000000001 ffffffff83215600 ffff880039e2f700 ffffffff81334ea9
ffffc9000730b000 0000000000000004 ffff88003c4f8420 ffff88003d3f8000
Call Trace:
[< inline >] __dump_stack lib/dump_stack.c:15
[<ffffffff81c2e46b>] dump_stack+0xb3/0x118 lib/dump_stack.c:51
[<ffffffff81334ea9>] lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4445
[< inline >] __kvm_memslots include/linux/kvm_host.h:534
[< inline >] kvm_memslots include/linux/kvm_host.h:541
[<ffffffff8105d6ae>] kvm_gfn_to_hva_cache_init+0xa1e/0xce0 virt/kvm/kvm_main.c:1941
[<ffffffff8112685d>] kvm_lapic_set_vapic_addr+0xed/0x140 arch/x86/kvm/lapic.c:2217
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: fda4e2e85589191b123d31cdc21fd33ee70f50fd
Cc: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8c74cf95655e814d253307283561cf2d47398df
Author: Yazen Ghannam <Yazen.Ghannam@amd.com>
Date: Tue Nov 8 09:35:06 2016 +0100
x86/cpu/AMD: Fix cpu_llc_id for AMD Fam17h systems
commit b0b6e86846093c5f8820386bc01515f857dd8faa upstream.
cpu_llc_id (Last Level Cache ID) derivation on AMD Fam17h has an
underflow bug when extracting the socket_id value. It starts from 0
so subtracting 1 from it will result in an invalid value. This breaks
scheduling topology later on since the cpu_llc_id will be incorrect.
For example, the the cpu_llc_id of the *other* CPU in the loops in
set_cpu_sibling_map() underflows and we're generating the funniest
thread_siblings masks and then when I run 8 threads of nbench, they get
spread around the LLC domains in a very strange pattern which doesn't
give you the normal scheduling spread one would expect for performance.
Other things like EDAC use cpu_llc_id so they will be b0rked too.
So, the APIC ID is preset in APICx020 for bits 3 and above: they contain
the core complex, node and socket IDs.
The LLC is at the core complex level so we can find a unique cpu_llc_id
by right shifting the APICID by 3 because then the least significant bit
will be the Core Complex ID.
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
[ Cleaned up and extended the commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 3849e91f571d ("x86/AMD: Fix last level cache topology for AMD Fam17h systems")
Link: http://lkml.kernel.org/r/20161108083506.rvqb5h4chrcptj7d@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>