diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/class/cdc-acm.c linux-2.6.31-usb.current/drivers/usb/class/cdc-acm.c
--- linux-2.6.31-tty.current/drivers/usb/class/cdc-acm.c	2009-09-10 15:03:35.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/class/cdc-acm.c	2009-09-14 14:44:31.000000000 -0700
@@ -59,6 +59,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/tty.h>
+#include <linux/serial.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/module.h>
@@ -609,6 +610,7 @@
 	acm->throttle = 0;
 
 	tasklet_schedule(&acm->urb_task);
+	set_bit(ASYNCB_INITIALIZED, &acm->port.flags);
 	rv = tty_port_block_til_ready(&acm->port, tty, filp);
 done:
 	mutex_unlock(&acm->mutex);
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/class/cdc-wdm.c linux-2.6.31-usb.current/drivers/usb/class/cdc-wdm.c
--- linux-2.6.31-tty.current/drivers/usb/class/cdc-wdm.c	2009-09-10 15:03:35.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/class/cdc-wdm.c	2009-09-14 14:44:31.000000000 -0700
@@ -313,8 +313,13 @@
 	r = usb_autopm_get_interface(desc->intf);
 	if (r < 0)
 		goto outnp;
-	r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
-							   &desc->flags));
+
+	if (!file->f_flags && O_NONBLOCK)
+		r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
+								&desc->flags));
+	else
+		if (test_bit(WDM_IN_USE, &desc->flags))
+			r = -EAGAIN;
 	if (r < 0)
 		goto out;
 
@@ -377,7 +382,7 @@
 static ssize_t wdm_read
 (struct file *file, char __user *buffer, size_t count, loff_t *ppos)
 {
-	int rv, cntr;
+	int rv, cntr = 0;
 	int i = 0;
 	struct wdm_device *desc = file->private_data;
 
@@ -389,10 +394,23 @@
 	if (desc->length == 0) {
 		desc->read = 0;
 retry:
+		if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+			rv = -ENODEV;
+			goto err;
+		}
 		i++;
-		rv = wait_event_interruptible(desc->wait,
-					      test_bit(WDM_READ, &desc->flags));
+		if (file->f_flags & O_NONBLOCK) {
+			if (!test_bit(WDM_READ, &desc->flags)) {
+				rv = cntr ? cntr : -EAGAIN;
+				goto err;
+			}
+			rv = 0;
+		} else {
+			rv = wait_event_interruptible(desc->wait,
+				test_bit(WDM_READ, &desc->flags));
+		}
 
+		/* may have happened while we slept */
 		if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
 			rv = -ENODEV;
 			goto err;
@@ -448,7 +466,7 @@
 
 err:
 	mutex_unlock(&desc->rlock);
-	if (rv < 0)
+	if (rv < 0 && rv != -EAGAIN)
 		dev_err(&desc->intf->dev, "wdm_read: exit error\n");
 	return rv;
 }
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/core/config.c linux-2.6.31-usb.current/drivers/usb/core/config.c
--- linux-2.6.31-tty.current/drivers/usb/core/config.c	2009-09-10 15:03:35.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/core/config.c	2009-09-14 14:44:31.000000000 -0700
@@ -105,7 +105,7 @@
 	ep->ss_ep_comp->extralen = i;
 	buffer += i;
 	size -= i;
-	retval = buffer - buffer_start + i;
+	retval = buffer - buffer_start;
 	if (num_skipped > 0)
 		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
 				num_skipped, plural(num_skipped),
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/host/sl811-hcd.c linux-2.6.31-usb.current/drivers/usb/host/sl811-hcd.c
--- linux-2.6.31-tty.current/drivers/usb/host/sl811-hcd.c	2009-06-15 12:15:47.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/host/sl811-hcd.c	2009-09-14 14:44:31.000000000 -0700
@@ -719,8 +719,12 @@
 		/* port status seems weird until after reset, so
 		 * force the reset and make khubd clean up later.
 		 */
-		sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION)
-				| (1 << USB_PORT_FEAT_CONNECTION);
+		if (sl811->stat_insrmv & 1)
+			sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
+		else
+			sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION);
+
+		sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION;
 
 	} else if (irqstat & SL11H_INTMASK_RD) {
 		if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) {
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/host/xhci-dbg.c linux-2.6.31-usb.current/drivers/usb/host/xhci-dbg.c
--- linux-2.6.31-tty.current/drivers/usb/host/xhci-dbg.c	2009-09-10 15:03:35.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/host/xhci-dbg.c	2009-09-14 14:44:31.000000000 -0700
@@ -413,7 +413,8 @@
 	int i;
 
 	struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
-	dma_addr_t dma = ctx->dma + ((unsigned long)slot_ctx - (unsigned long)ctx);
+	dma_addr_t dma = ctx->dma +
+		((unsigned long)slot_ctx - (unsigned long)ctx->bytes);
 	int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
 
 	xhci_dbg(xhci, "Slot Context:\n");
@@ -459,7 +460,7 @@
 	for (i = 0; i < last_ep_ctx; ++i) {
 		struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i);
 		dma_addr_t dma = ctx->dma +
-			((unsigned long)ep_ctx - (unsigned long)ctx);
+			((unsigned long)ep_ctx - (unsigned long)ctx->bytes);
 
 		xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
 		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/host/xhci.h linux-2.6.31-usb.current/drivers/usb/host/xhci.h
--- linux-2.6.31-tty.current/drivers/usb/host/xhci.h	2009-09-10 15:03:35.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/host/xhci.h	2009-09-14 14:44:31.000000000 -0700
@@ -581,6 +581,7 @@
 /* bit 15 is Linear Stream Array */
 /* Interval - period between requests to an endpoint - 125u increments. */
 #define EP_INTERVAL(p)		((p & 0xff) << 16)
+#define EP_INTERVAL_TO_UFRAMES(p)		(1 << (((p) >> 16) & 0xff))
 
 /* ep_info2 bitmasks */
 /*
@@ -589,6 +590,7 @@
  */
 #define	FORCE_EVENT	(0x1)
 #define ERROR_COUNT(p)	(((p) & 0x3) << 1)
+#define CTX_TO_EP_TYPE(p)	(((p) >> 3) & 0x7)
 #define EP_TYPE(p)	((p) << 3)
 #define ISOC_OUT_EP	1
 #define BULK_OUT_EP	2
@@ -601,6 +603,8 @@
 /* bit 7 is Host Initiate Disable - for disabling stream selection */
 #define MAX_BURST(p)	(((p)&0xff) << 8)
 #define MAX_PACKET(p)	(((p)&0xffff) << 16)
+#define MAX_PACKET_MASK		(0xffff << 16)
+#define MAX_PACKET_DECODED(p)	(((p) >> 16) & 0xffff)
 
 
 /**
@@ -926,6 +930,12 @@
 	union xhci_trb		*last_trb;
 };
 
+struct xhci_dequeue_state {
+	struct xhci_segment *new_deq_seg;
+	union xhci_trb *new_deq_ptr;
+	int new_cycle_state;
+};
+
 struct xhci_ring {
 	struct xhci_segment	*first_seg;
 	union  xhci_trb		*enqueue;
@@ -952,12 +962,6 @@
 	u32			cycle_state;
 };
 
-struct xhci_dequeue_state {
-	struct xhci_segment *new_deq_seg;
-	union xhci_trb *new_deq_ptr;
-	int new_cycle_state;
-};
-
 struct xhci_erst_entry {
 	/* 64-bit event ring segment address */
 	u64	seg_addr;
@@ -1058,6 +1062,9 @@
 	int			noops_submitted;
 	int			noops_handled;
 	int			error_bitmask;
+	unsigned int		quirks;
+#define	XHCI_LINK_TRB_QUIRK	(1 << 0)
+#define XHCI_RESET_EP_QUIRK	(1 << 1)
 };
 
 /* For testing purposes */
@@ -1136,6 +1143,13 @@
 	writel(val_hi, ptr + 1);
 }
 
+static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
+{
+	u32 temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+	return ((HC_VERSION(temp) == 0x95) &&
+			(xhci->quirks & XHCI_LINK_TRB_QUIRK));
+}
+
 /* xHCI debugging */
 void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
 void xhci_print_registers(struct xhci_hcd *xhci);
@@ -1158,7 +1172,12 @@
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
 unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
+unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
 void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
+void xhci_endpoint_copy(struct xhci_hcd *xhci,
+		struct xhci_virt_device *vdev, unsigned int ep_index);
+void xhci_slot_copy(struct xhci_hcd *xhci, struct xhci_virt_device *vdev);
 int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
 		struct usb_device *udev, struct usb_host_endpoint *ep,
 		gfp_t mem_flags);
@@ -1205,8 +1224,12 @@
 		int slot_id, unsigned int ep_index);
 int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
 		int slot_id, unsigned int ep_index);
+int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+		int slot_id, unsigned int ep_index);
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id);
+int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+		u32 slot_id);
 int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index);
 void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
@@ -1215,6 +1238,12 @@
 void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
 		struct xhci_ring *ep_ring, unsigned int slot_id,
 		unsigned int ep_index, struct xhci_dequeue_state *deq_state);
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		unsigned int ep_index, struct xhci_ring *ep_ring);
+void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_dequeue_state *deq_state);
 
 /* xHCI roothub code */
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/host/xhci-hcd.c linux-2.6.31-usb.current/drivers/usb/host/xhci-hcd.c
--- linux-2.6.31-tty.current/drivers/usb/host/xhci-hcd.c	2009-09-10 15:03:35.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/host/xhci-hcd.c	2009-09-14 14:44:31.000000000 -0700
@@ -22,12 +22,18 @@
 
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 
 #include "xhci.h"
 
 #define DRIVER_AUTHOR "Sarah Sharp"
 #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
 
+/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
+static int link_quirk;
+module_param(link_quirk, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
+
 /* TODO: copied from ehci-hcd.c - can this be refactored? */
 /*
  * handshake - spin reading hc until handshake completes or fails
@@ -214,6 +220,12 @@
 
 	xhci_dbg(xhci, "xhci_init\n");
 	spin_lock_init(&xhci->lock);
+	if (link_quirk) {
+		xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n");
+		xhci->quirks |= XHCI_LINK_TRB_QUIRK;
+	} else {
+		xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n");
+	}
 	retval = xhci_mem_init(xhci, GFP_KERNEL);
 	xhci_dbg(xhci, "Finished xhci_init\n");
 
@@ -555,13 +567,22 @@
 	return 1 << (xhci_get_endpoint_index(desc) + 1);
 }
 
+/* Find the flag for this endpoint (for use in the control context).  Use the
+ * endpoint index to create a bitmask.  The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index)
+{
+	return 1 << (ep_index + 1);
+}
+
 /* Compute the last valid endpoint context index.  Basically, this is the
  * endpoint index plus one.  For slot contexts with more than valid endpoint,
  * we find the most significant bit set in the added contexts flags.
  * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000
  * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one.
  */
-static inline unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
 {
 	return fls(added_ctxs) - 1;
 }
@@ -589,6 +610,70 @@
 	return 1;
 }
 
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev, struct xhci_virt_device *virt_dev,
+		bool ctx_change);
+
+/*
+ * Full speed devices may have a max packet size greater than 8 bytes, but the
+ * USB core doesn't know that until it reads the first 8 bytes of the
+ * descriptor.  If the usb_device's max packet size changes after that point,
+ * we need to issue an evaluate context command and wait on it.
+ */
+static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
+		unsigned int ep_index, struct urb *urb)
+{
+	struct xhci_container_ctx *in_ctx;
+	struct xhci_container_ctx *out_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_ep_ctx *ep_ctx;
+	int max_packet_size;
+	int hw_max_packet_size;
+	int ret = 0;
+
+	out_ctx = xhci->devs[slot_id]->out_ctx;
+	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+	hw_max_packet_size = MAX_PACKET_DECODED(ep_ctx->ep_info2);
+	max_packet_size = urb->dev->ep0.desc.wMaxPacketSize;
+	if (hw_max_packet_size != max_packet_size) {
+		xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n");
+		xhci_dbg(xhci, "Max packet size in usb_device = %d\n",
+				max_packet_size);
+		xhci_dbg(xhci, "Max packet size in xHCI HW = %d\n",
+				hw_max_packet_size);
+		xhci_dbg(xhci, "Issuing evaluate context command.\n");
+
+		/* Set up the modified control endpoint 0 */
+		xhci_endpoint_copy(xhci, xhci->devs[slot_id], ep_index);
+		in_ctx = xhci->devs[slot_id]->in_ctx;
+		ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+		ep_ctx->ep_info2 &= ~MAX_PACKET_MASK;
+		ep_ctx->ep_info2 |= MAX_PACKET(max_packet_size);
+
+		/* Set up the input context flags for the command */
+		/* FIXME: This won't work if a non-default control endpoint
+		 * changes max packet sizes.
+		 */
+		ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+		ctrl_ctx->add_flags = EP0_FLAG;
+		ctrl_ctx->drop_flags = 0;
+
+		xhci_dbg(xhci, "Slot %d input context\n", slot_id);
+		xhci_dbg_ctx(xhci, in_ctx, ep_index);
+		xhci_dbg(xhci, "Slot %d output context\n", slot_id);
+		xhci_dbg_ctx(xhci, out_ctx, ep_index);
+
+		ret = xhci_configure_endpoint(xhci, urb->dev,
+				xhci->devs[slot_id], true);
+
+		/* Clean up the input context for later use by bandwidth
+		 * functions.
+		 */
+		ctrl_ctx->add_flags = SLOT_FLAG;
+	}
+	return ret;
+}
+
 /*
  * non-error returns are a promise to giveback() the urb later
  * we drop ownership so next owner (or urb unlink) can get it
@@ -600,13 +685,13 @@
 	int ret = 0;
 	unsigned int slot_id, ep_index;
 
+
 	if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0)
 		return -EINVAL;
 
 	slot_id = urb->dev->slot_id;
 	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
 
-	spin_lock_irqsave(&xhci->lock, flags);
 	if (!xhci->devs || !xhci->devs[slot_id]) {
 		if (!in_interrupt())
 			dev_warn(&urb->dev->dev, "WARN: urb submitted for dev with no Slot ID\n");
@@ -619,19 +704,38 @@
 		ret = -ESHUTDOWN;
 		goto exit;
 	}
-	if (usb_endpoint_xfer_control(&urb->ep->desc))
+	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+		/* Check to see if the max packet size for the default control
+		 * endpoint changed during FS device enumeration
+		 */
+		if (urb->dev->speed == USB_SPEED_FULL) {
+			ret = xhci_check_maxpacket(xhci, slot_id,
+					ep_index, urb);
+			if (ret < 0)
+				return ret;
+		}
+
 		/* We have a spinlock and interrupts disabled, so we must pass
 		 * atomic context to this function, which may allocate memory.
 		 */
+		spin_lock_irqsave(&xhci->lock, flags);
 		ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
 				slot_id, ep_index);
-	else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	} else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) {
+		spin_lock_irqsave(&xhci->lock, flags);
 		ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
 				slot_id, ep_index);
-	else
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	} else if (usb_endpoint_xfer_int(&urb->ep->desc)) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb,
+				slot_id, ep_index);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	} else {
 		ret = -EINVAL;
+	}
 exit:
-	spin_unlock_irqrestore(&xhci->lock, flags);
 	return ret;
 }
 
@@ -930,6 +1034,122 @@
 	}
 }
 
+static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
+		struct usb_device *udev, struct xhci_virt_device *virt_dev)
+{
+	int ret;
+
+	switch (virt_dev->cmd_status) {
+	case COMP_ENOMEM:
+		dev_warn(&udev->dev, "Not enough host controller resources "
+				"for new device state.\n");
+		ret = -ENOMEM;
+		/* FIXME: can we allocate more resources for the HC? */
+		break;
+	case COMP_BW_ERR:
+		dev_warn(&udev->dev, "Not enough bandwidth "
+				"for new device state.\n");
+		ret = -ENOSPC;
+		/* FIXME: can we go back to the old state? */
+		break;
+	case COMP_TRB_ERR:
+		/* the HCD set up something wrong */
+		dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, "
+				"add flag = 1, "
+				"and endpoint is not disabled.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_SUCCESS:
+		dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
+		ret = 0;
+		break;
+	default:
+		xhci_err(xhci, "ERROR: unexpected command completion "
+				"code 0x%x.\n", virt_dev->cmd_status);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
+		struct usb_device *udev, struct xhci_virt_device *virt_dev)
+{
+	int ret;
+
+	switch (virt_dev->cmd_status) {
+	case COMP_EINVAL:
+		dev_warn(&udev->dev, "WARN: xHCI driver setup invalid evaluate "
+				"context command.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_EBADSLT:
+		dev_warn(&udev->dev, "WARN: slot not enabled for"
+				"evaluate context command.\n");
+	case COMP_CTX_STATE:
+		dev_warn(&udev->dev, "WARN: invalid context state for "
+				"evaluate context command.\n");
+		xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1);
+		ret = -EINVAL;
+		break;
+	case COMP_SUCCESS:
+		dev_dbg(&udev->dev, "Successful evaluate context command\n");
+		ret = 0;
+		break;
+	default:
+		xhci_err(xhci, "ERROR: unexpected command completion "
+				"code 0x%x.\n", virt_dev->cmd_status);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+/* Issue a configure endpoint command or evaluate context command
+ * and wait for it to finish.
+ */
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev, struct xhci_virt_device *virt_dev,
+		bool ctx_change)
+{
+	int ret;
+	int timeleft;
+	unsigned long flags;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (!ctx_change)
+		ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma,
+				udev->slot_id);
+	else
+		ret = xhci_queue_evaluate_context(xhci, virt_dev->in_ctx->dma,
+				udev->slot_id);
+	if (ret < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
+		return -ENOMEM;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Wait for the configure endpoint command to complete */
+	timeleft = wait_for_completion_interruptible_timeout(
+			&virt_dev->cmd_completion,
+			USB_CTRL_SET_TIMEOUT);
+	if (timeleft <= 0) {
+		xhci_warn(xhci, "%s while waiting for %s command\n",
+				timeleft == 0 ? "Timeout" : "Signal",
+				ctx_change == 0 ?
+					"configure endpoint" :
+					"evaluate context");
+		/* FIXME cancel the configure endpoint command */
+		return -ETIME;
+	}
+
+	if (!ctx_change)
+		return xhci_configure_endpoint_result(xhci, udev, virt_dev);
+	return xhci_evaluate_context_result(xhci, udev, virt_dev);
+}
+
 /* Called after one or more calls to xhci_add_endpoint() or
  * xhci_drop_endpoint().  If this call fails, the USB core is expected
  * to call xhci_reset_bandwidth().
@@ -944,8 +1164,6 @@
 {
 	int i;
 	int ret = 0;
-	int timeleft;
-	unsigned long flags;
 	struct xhci_hcd *xhci;
 	struct xhci_virt_device	*virt_dev;
 	struct xhci_input_control_ctx *ctrl_ctx;
@@ -975,56 +1193,7 @@
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx,
 			LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
 
-	spin_lock_irqsave(&xhci->lock, flags);
-	ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma,
-			udev->slot_id);
-	if (ret < 0) {
-		spin_unlock_irqrestore(&xhci->lock, flags);
-		xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
-		return -ENOMEM;
-	}
-	xhci_ring_cmd_db(xhci);
-	spin_unlock_irqrestore(&xhci->lock, flags);
-
-	/* Wait for the configure endpoint command to complete */
-	timeleft = wait_for_completion_interruptible_timeout(
-			&virt_dev->cmd_completion,
-			USB_CTRL_SET_TIMEOUT);
-	if (timeleft <= 0) {
-		xhci_warn(xhci, "%s while waiting for configure endpoint command\n",
-				timeleft == 0 ? "Timeout" : "Signal");
-		/* FIXME cancel the configure endpoint command */
-		return -ETIME;
-	}
-
-	switch (virt_dev->cmd_status) {
-	case COMP_ENOMEM:
-		dev_warn(&udev->dev, "Not enough host controller resources "
-				"for new device state.\n");
-		ret = -ENOMEM;
-		/* FIXME: can we allocate more resources for the HC? */
-		break;
-	case COMP_BW_ERR:
-		dev_warn(&udev->dev, "Not enough bandwidth "
-				"for new device state.\n");
-		ret = -ENOSPC;
-		/* FIXME: can we go back to the old state? */
-		break;
-	case COMP_TRB_ERR:
-		/* the HCD set up something wrong */
-		dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, add flag = 1, "
-				"and endpoint is not disabled.\n");
-		ret = -EINVAL;
-		break;
-	case COMP_SUCCESS:
-		dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
-		break;
-	default:
-		xhci_err(xhci, "ERROR: unexpected command completion "
-				"code 0x%x.\n", virt_dev->cmd_status);
-		ret = -EINVAL;
-		break;
-	}
+	ret = xhci_configure_endpoint(xhci, udev, virt_dev, false);
 	if (ret) {
 		/* Callee should call reset_bandwidth() */
 		return ret;
@@ -1075,6 +1244,75 @@
 	xhci_zero_in_ctx(xhci, virt_dev);
 }
 
+void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_dequeue_state *deq_state)
+{
+	struct xhci_container_ctx *in_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_ep_ctx *ep_ctx;
+	u32 added_ctxs;
+	dma_addr_t addr;
+
+	xhci_endpoint_copy(xhci, xhci->devs[slot_id], ep_index);
+	in_ctx = xhci->devs[slot_id]->in_ctx;
+	ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+	addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg,
+			deq_state->new_deq_ptr);
+	if (addr == 0) {
+		xhci_warn(xhci, "WARN Cannot submit config ep after "
+				"reset ep command\n");
+		xhci_warn(xhci, "WARN deq seg = %p, deq ptr = %p\n",
+				deq_state->new_deq_seg,
+				deq_state->new_deq_ptr);
+		return;
+	}
+	ep_ctx->deq = addr | deq_state->new_cycle_state;
+
+	xhci_slot_copy(xhci, xhci->devs[slot_id]);
+
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+	added_ctxs = xhci_get_endpoint_flag_from_index(ep_index);
+	ctrl_ctx->add_flags = added_ctxs | SLOT_FLAG;
+	ctrl_ctx->drop_flags = added_ctxs;
+
+	xhci_dbg(xhci, "Slot ID %d Input Context:\n", slot_id);
+	xhci_dbg_ctx(xhci, in_ctx, ep_index);
+}
+
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		unsigned int ep_index, struct xhci_ring *ep_ring)
+{
+	struct xhci_dequeue_state deq_state;
+
+	xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+	/* We need to move the HW's dequeue pointer past this TD,
+	 * or it will attempt to resend it on the next doorbell ring.
+	 */
+	xhci_find_new_dequeue_state(xhci, udev->slot_id,
+			ep_index, ep_ring->stopped_td,
+			&deq_state);
+
+	/* HW with the reset endpoint quirk will use the saved dequeue state to
+	 * issue a configure endpoint command later.
+	 */
+	if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
+		xhci_dbg(xhci, "Queueing new dequeue state\n");
+		xhci_queue_new_dequeue_state(xhci, ep_ring,
+				udev->slot_id,
+				ep_index, &deq_state);
+	} else {
+		/* Better hope no one uses the input context between now and the
+		 * reset endpoint completion!
+		 */
+		xhci_dbg(xhci, "Setting up input context for "
+				"configure endpoint command\n");
+		xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id,
+				ep_index, &deq_state);
+	}
+}
+
 /* Deal with stalled endpoints.  The core should have sent the control message
  * to clear the halt condition.  However, we need to make the xHCI hardware
  * reset its sequence number, since a device will expect a sequence number of
@@ -1089,7 +1327,6 @@
 	unsigned int ep_index;
 	unsigned long flags;
 	int ret;
-	struct xhci_dequeue_state deq_state;
 	struct xhci_ring *ep_ring;
 
 	xhci = hcd_to_xhci(hcd);
@@ -1106,6 +1343,10 @@
 				ep->desc.bEndpointAddress);
 		return;
 	}
+	if (usb_endpoint_xfer_control(&ep->desc)) {
+		xhci_dbg(xhci, "Control endpoint stall already handled.\n");
+		return;
+	}
 
 	xhci_dbg(xhci, "Queueing reset endpoint command\n");
 	spin_lock_irqsave(&xhci->lock, flags);
@@ -1116,16 +1357,7 @@
 	 * command.  Better hope that last command worked!
 	 */
 	if (!ret) {
-		xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
-		/* We need to move the HW's dequeue pointer past this TD,
-		 * or it will attempt to resend it on the next doorbell ring.
-		 */
-		xhci_find_new_dequeue_state(xhci, udev->slot_id,
-				ep_index, ep_ring->stopped_td, &deq_state);
-		xhci_dbg(xhci, "Queueing new dequeue state\n");
-		xhci_queue_new_dequeue_state(xhci, ep_ring,
-				udev->slot_id,
-				ep_index, &deq_state);
+		xhci_cleanup_stalled_ring(xhci, udev, ep_index, ep_ring);
 		kfree(ep_ring->stopped_td);
 		xhci_ring_cmd_db(xhci);
 	}
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/host/xhci-mem.c linux-2.6.31-usb.current/drivers/usb/host/xhci-mem.c
--- linux-2.6.31-tty.current/drivers/usb/host/xhci-mem.c	2009-09-10 15:03:35.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/host/xhci-mem.c	2009-09-14 14:44:31.000000000 -0700
@@ -94,6 +94,9 @@
 		val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
 		val &= ~TRB_TYPE_BITMASK;
 		val |= TRB_TYPE(TRB_LINK);
+		/* Always set the chain bit with 0.95 hardware */
+		if (xhci_link_trb_quirk(xhci))
+			val |= TRB_CHAIN;
 		prev->trbs[TRBS_PER_SEGMENT-1].link.control = val;
 	}
 	xhci_dbg(xhci, "Linking segment 0x%llx to segment 0x%llx (DMA)\n",
@@ -398,15 +401,28 @@
 	/* Step 5 */
 	ep0_ctx->ep_info2 = EP_TYPE(CTRL_EP);
 	/*
-	 * See section 4.3 bullet 6:
-	 * The default Max Packet size for ep0 is "8 bytes for a USB2
-	 * LS/FS/HS device or 512 bytes for a USB3 SS device"
 	 * XXX: Not sure about wireless USB devices.
 	 */
-	if (udev->speed == USB_SPEED_SUPER)
+	switch (udev->speed) {
+	case USB_SPEED_SUPER:
 		ep0_ctx->ep_info2 |= MAX_PACKET(512);
-	else
+		break;
+	case USB_SPEED_HIGH:
+	/* USB core guesses at a 64-byte max packet first for FS devices */
+	case USB_SPEED_FULL:
+		ep0_ctx->ep_info2 |= MAX_PACKET(64);
+		break;
+	case USB_SPEED_LOW:
 		ep0_ctx->ep_info2 |= MAX_PACKET(8);
+		break;
+	case USB_SPEED_VARIABLE:
+		xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
+		return -EINVAL;
+		break;
+	default:
+		/* New speed? */
+		BUG();
+	}
 	/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
 	ep0_ctx->ep_info2 |= MAX_BURST(0);
 	ep0_ctx->ep_info2 |= ERROR_COUNT(3);
@@ -598,6 +614,44 @@
 	 */
 }
 
+/* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
+ * Useful when you want to change one particular aspect of the endpoint and then
+ * issue a configure endpoint command.
+ */
+void xhci_endpoint_copy(struct xhci_hcd *xhci,
+		struct xhci_virt_device *vdev, unsigned int ep_index)
+{
+	struct xhci_ep_ctx *out_ep_ctx;
+	struct xhci_ep_ctx *in_ep_ctx;
+
+	out_ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
+	in_ep_ctx = xhci_get_ep_ctx(xhci, vdev->in_ctx, ep_index);
+
+	in_ep_ctx->ep_info = out_ep_ctx->ep_info;
+	in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2;
+	in_ep_ctx->deq = out_ep_ctx->deq;
+	in_ep_ctx->tx_info = out_ep_ctx->tx_info;
+}
+
+/* Copy output xhci_slot_ctx to the input xhci_slot_ctx.
+ * Useful when you want to change one particular aspect of the endpoint and then
+ * issue a configure endpoint command.  Only the context entries field matters,
+ * but we'll copy the whole thing anyway.
+ */
+void xhci_slot_copy(struct xhci_hcd *xhci, struct xhci_virt_device *vdev)
+{
+	struct xhci_slot_ctx *in_slot_ctx;
+	struct xhci_slot_ctx *out_slot_ctx;
+
+	in_slot_ctx = xhci_get_slot_ctx(xhci, vdev->in_ctx);
+	out_slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
+
+	in_slot_ctx->dev_info = out_slot_ctx->dev_info;
+	in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2;
+	in_slot_ctx->tt_info = out_slot_ctx->tt_info;
+	in_slot_ctx->dev_state = out_slot_ctx->dev_state;
+}
+
 /* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
 static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
 {
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/host/xhci-pci.c linux-2.6.31-usb.current/drivers/usb/host/xhci-pci.c
--- linux-2.6.31-tty.current/drivers/usb/host/xhci-pci.c	2009-09-10 15:03:35.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/host/xhci-pci.c	2009-09-14 14:44:31.000000000 -0700
@@ -24,6 +24,10 @@
 
 #include "xhci.h"
 
+/* Device for a quirk */
+#define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
+#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
+
 static const char hcd_name[] = "xhci_hcd";
 
 /* called after powerup, by probe or system-pm "wakeup" */
@@ -62,6 +66,15 @@
 	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
 	xhci_print_registers(xhci);
 
+	/* Look for vendor-specific quirks */
+	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+			pdev->revision == 0x0) {
+			xhci->quirks |= XHCI_RESET_EP_QUIRK;
+			xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
+					" endpoint cmd after reset endpoint\n");
+	}
+
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
 	if (retval)
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/host/xhci-ring.c linux-2.6.31-usb.current/drivers/usb/host/xhci-ring.c
--- linux-2.6.31-tty.current/drivers/usb/host/xhci-ring.c	2009-09-10 15:03:35.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/host/xhci-ring.c	2009-09-14 14:44:31.000000000 -0700
@@ -172,8 +172,9 @@
  * have their chain bit cleared (so that each Link TRB is a separate TD).
  *
  * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
- * set, but other sections talk about dealing with the chain bit set.
- * Assume section 6.4.4.1 is wrong, and the chain bit can be set in a Link TRB.
+ * set, but other sections talk about dealing with the chain bit set.  This was
+ * fixed in the 0.96 specification errata, but we have to assume that all 0.95
+ * xHCI hardware can't handle the chain bit being cleared on a link TRB.
  */
 static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
 {
@@ -191,8 +192,14 @@
 	while (last_trb(xhci, ring, ring->enq_seg, next)) {
 		if (!consumer) {
 			if (ring != xhci->event_ring) {
-				next->link.control &= ~TRB_CHAIN;
-				next->link.control |= chain;
+				/* If we're not dealing with 0.95 hardware,
+				 * carry over the chain bit of the previous TRB
+				 * (which may mean the chain bit is cleared).
+				 */
+				if (!xhci_link_trb_quirk(xhci)) {
+					next->link.control &= ~TRB_CHAIN;
+					next->link.control |= chain;
+				}
 				/* Give this link TRB to the hardware */
 				wmb();
 				if (next->link.control & TRB_CYCLE)
@@ -462,7 +469,6 @@
 	 * ring running.
 	 */
 	ep_ring->state |= SET_DEQ_PENDING;
-	xhci_ring_cmd_db(xhci);
 }
 
 /*
@@ -531,6 +537,7 @@
 	if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
 		xhci_queue_new_dequeue_state(xhci, ep_ring,
 				slot_id, ep_index, &deq_state);
+		xhci_ring_cmd_db(xhci);
 	} else {
 		/* Otherwise just ring the doorbell to restart the ring */
 		ring_ep_doorbell(xhci, slot_id, ep_index);
@@ -644,18 +651,31 @@
 {
 	int slot_id;
 	unsigned int ep_index;
+	struct xhci_ring *ep_ring;
 
 	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
 	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
 	/* This command will only fail if the endpoint wasn't halted,
 	 * but we don't care.
 	 */
 	xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
 			(unsigned int) GET_COMP_CODE(event->status));
 
-	/* Clear our internal halted state and restart the ring */
-	xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED;
-	ring_ep_doorbell(xhci, slot_id, ep_index);
+	/* HW with the reset endpoint quirk needs to have a configure endpoint
+	 * command complete before the endpoint can be used.  Queue that here
+	 * because the HW can't handle two commands being queued in a row.
+	 */
+	if (xhci->quirks & XHCI_RESET_EP_QUIRK) {
+		xhci_dbg(xhci, "Queueing configure endpoint command\n");
+		xhci_queue_configure_endpoint(xhci,
+				xhci->devs[slot_id]->in_ctx->dma, slot_id);
+		xhci_ring_cmd_db(xhci);
+	} else {
+		/* Clear our internal halted state and restart the ring */
+		ep_ring->state &= ~EP_HALTED;
+		ring_ep_doorbell(xhci, slot_id, ep_index);
+	}
 }
 
 static void handle_cmd_completion(struct xhci_hcd *xhci,
@@ -664,6 +684,10 @@
 	int slot_id = TRB_TO_SLOT_ID(event->flags);
 	u64 cmd_dma;
 	dma_addr_t cmd_dequeue_dma;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	unsigned int ep_index;
+	struct xhci_ring *ep_ring;
+	unsigned int ep_state;
 
 	cmd_dma = event->cmd_trb;
 	cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
@@ -691,6 +715,41 @@
 			xhci_free_virt_device(xhci, slot_id);
 		break;
 	case TRB_TYPE(TRB_CONFIG_EP):
+		/*
+		 * Configure endpoint commands can come from the USB core
+		 * configuration or alt setting changes, or because the HW
+		 * needed an extra configure endpoint command after a reset
+		 * endpoint command.  In the latter case, the xHCI driver is
+		 * not waiting on the configure endpoint command.
+		 */
+		ctrl_ctx = xhci_get_input_control_ctx(xhci,
+				xhci->devs[slot_id]->in_ctx);
+		/* Input ctx add_flags are the endpoint index plus one */
+		ep_index = xhci_last_valid_endpoint(ctrl_ctx->add_flags) - 1;
+		ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+		if (!ep_ring) {
+			/* This must have been an initial configure endpoint */
+			xhci->devs[slot_id]->cmd_status =
+				GET_COMP_CODE(event->status);
+			complete(&xhci->devs[slot_id]->cmd_completion);
+			break;
+		}
+		ep_state = ep_ring->state;
+		xhci_dbg(xhci, "Completed config ep cmd - last ep index = %d, "
+				"state = %d\n", ep_index, ep_state);
+		if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
+				ep_state & EP_HALTED) {
+			/* Clear our internal halted state and restart ring */
+			xhci->devs[slot_id]->ep_rings[ep_index]->state &=
+				~EP_HALTED;
+			ring_ep_doorbell(xhci, slot_id, ep_index);
+		} else {
+			xhci->devs[slot_id]->cmd_status =
+				GET_COMP_CODE(event->status);
+			complete(&xhci->devs[slot_id]->cmd_completion);
+		}
+		break;
+	case TRB_TYPE(TRB_EVAL_CONTEXT):
 		xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
 		complete(&xhci->devs[slot_id]->cmd_completion);
 		break;
@@ -806,6 +865,7 @@
 {
 	struct xhci_virt_device *xdev;
 	struct xhci_ring *ep_ring;
+	unsigned int slot_id;
 	int ep_index;
 	struct xhci_td *td = 0;
 	dma_addr_t event_dma;
@@ -814,9 +874,11 @@
 	struct urb *urb = 0;
 	int status = -EINPROGRESS;
 	struct xhci_ep_ctx *ep_ctx;
+	u32 trb_comp_code;
 
 	xhci_dbg(xhci, "In %s\n", __func__);
-	xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
+	slot_id = TRB_TO_SLOT_ID(event->flags);
+	xdev = xhci->devs[slot_id];
 	if (!xdev) {
 		xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
 		return -ENODEV;
@@ -870,7 +932,8 @@
 			(unsigned int) event->flags);
 
 	/* Look for common error cases */
-	switch (GET_COMP_CODE(event->transfer_len)) {
+	trb_comp_code = GET_COMP_CODE(event->transfer_len);
+	switch (trb_comp_code) {
 	/* Skip codes that require special handling depending on
 	 * transfer type
 	 */
@@ -913,7 +976,7 @@
 	/* Was this a control transfer? */
 	if (usb_endpoint_xfer_control(&td->urb->ep->desc)) {
 		xhci_debug_trb(xhci, xhci->event_ring->dequeue);
-		switch (GET_COMP_CODE(event->transfer_len)) {
+		switch (trb_comp_code) {
 		case COMP_SUCCESS:
 			if (event_trb == ep_ring->dequeue) {
 				xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n");
@@ -928,8 +991,39 @@
 			break;
 		case COMP_SHORT_TX:
 			xhci_warn(xhci, "WARN: short transfer on control ep\n");
-			status = -EREMOTEIO;
+			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+				status = -EREMOTEIO;
+			else
+				status = 0;
 			break;
+		case COMP_BABBLE:
+			/* The 0.96 spec says a babbling control endpoint
+			 * is not halted. The 0.96 spec says it is.  Some HW
+			 * claims to be 0.95 compliant, but it halts the control
+			 * endpoint anyway.  Check if a babble halted the
+			 * endpoint.
+			 */
+			if (ep_ctx->ep_info != EP_STATE_HALTED)
+				break;
+			/* else fall through */
+		case COMP_STALL:
+			/* Did we transfer part of the data (middle) phase? */
+			if (event_trb != ep_ring->dequeue &&
+					event_trb != td->last_trb)
+				td->urb->actual_length =
+					td->urb->transfer_buffer_length
+					- TRB_LEN(event->transfer_len);
+			else
+				td->urb->actual_length = 0;
+
+			ep_ring->stopped_td = td;
+			ep_ring->stopped_trb = event_trb;
+			xhci_queue_reset_ep(xhci, slot_id, ep_index);
+			xhci_cleanup_stalled_ring(xhci,
+					td->urb->dev,
+					ep_index, ep_ring);
+			xhci_ring_cmd_db(xhci);
+			goto td_cleanup;
 		default:
 			/* Others already handled above */
 			break;
@@ -943,7 +1037,10 @@
 			if (event_trb == td->last_trb) {
 				if (td->urb->actual_length != 0) {
 					/* Don't overwrite a previously set error code */
-					if (status == -EINPROGRESS || status == 0)
+					if ((status == -EINPROGRESS ||
+								status == 0) &&
+							(td->urb->transfer_flags
+							 & URB_SHORT_NOT_OK))
 						/* Did we already see a short data stage? */
 						status = -EREMOTEIO;
 				} else {
@@ -952,7 +1049,7 @@
 				}
 			} else {
 			/* Maybe the event was for the data stage? */
-				if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) {
+				if (trb_comp_code != COMP_STOP_INVAL) {
 					/* We didn't stop on a link TRB in the middle */
 					td->urb->actual_length =
 						td->urb->transfer_buffer_length -
@@ -964,7 +1061,7 @@
 			}
 		}
 	} else {
-		switch (GET_COMP_CODE(event->transfer_len)) {
+		switch (trb_comp_code) {
 		case COMP_SUCCESS:
 			/* Double check that the HW transferred everything. */
 			if (event_trb != td->last_trb) {
@@ -975,7 +1072,12 @@
 				else
 					status = 0;
 			} else {
-				xhci_dbg(xhci, "Successful bulk transfer!\n");
+				if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
+					xhci_dbg(xhci, "Successful bulk "
+							"transfer!\n");
+				else
+					xhci_dbg(xhci, "Successful interrupt "
+							"transfer!\n");
 				status = 0;
 			}
 			break;
@@ -1001,11 +1103,17 @@
 				td->urb->actual_length =
 					td->urb->transfer_buffer_length -
 					TRB_LEN(event->transfer_len);
-				if (td->urb->actual_length < 0) {
+				if (td->urb->transfer_buffer_length <
+						td->urb->actual_length) {
 					xhci_warn(xhci, "HC gave bad length "
 							"of %d bytes left\n",
 							TRB_LEN(event->transfer_len));
 					td->urb->actual_length = 0;
+					if (td->urb->transfer_flags &
+							URB_SHORT_NOT_OK)
+						status = -EREMOTEIO;
+					else
+						status = 0;
 				}
 				/* Don't overwrite a previously set error code */
 				if (status == -EINPROGRESS) {
@@ -1041,14 +1149,14 @@
 			/* If the ring didn't stop on a Link or No-op TRB, add
 			 * in the actual bytes transferred from the Normal TRB
 			 */
-			if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+			if (trb_comp_code != COMP_STOP_INVAL)
 				td->urb->actual_length +=
 					TRB_LEN(cur_trb->generic.field[2]) -
 					TRB_LEN(event->transfer_len);
 		}
 	}
-	if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
-			GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+	if (trb_comp_code == COMP_STOP_INVAL ||
+			trb_comp_code == COMP_STOP) {
 		/* The Endpoint Stop Command completion will take care of any
 		 * stopped TDs.  A stopped TD may be restarted, so don't update
 		 * the ring dequeue pointer or take this TD off any lists yet.
@@ -1056,7 +1164,8 @@
 		ep_ring->stopped_td = td;
 		ep_ring->stopped_trb = event_trb;
 	} else {
-		if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) {
+		if (trb_comp_code == COMP_STALL ||
+				trb_comp_code == COMP_BABBLE) {
 			/* The transfer is completed from the driver's
 			 * perspective, but we need to issue a set dequeue
 			 * command for this stalled endpoint to move the dequeue
@@ -1072,16 +1181,41 @@
 			inc_deq(xhci, ep_ring, false);
 		}
 
+td_cleanup:
 		/* Clean up the endpoint's TD list */
 		urb = td->urb;
+		/* Do one last check of the actual transfer length.
+		 * If the host controller said we transferred more data than
+		 * the buffer length, urb->actual_length will be a very big
+		 * number (since it's unsigned).  Play it safe and say we didn't
+		 * transfer anything.
+		 */
+		if (urb->actual_length > urb->transfer_buffer_length) {
+			xhci_warn(xhci, "URB transfer length is wrong, "
+					"xHC issue? req. len = %u, "
+					"act. len = %u\n",
+					urb->transfer_buffer_length,
+					urb->actual_length);
+			urb->actual_length = 0;
+			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+				status = -EREMOTEIO;
+			else
+				status = 0;
+		}
 		list_del(&td->td_list);
 		/* Was this TD slated to be cancelled but completed anyway? */
 		if (!list_empty(&td->cancelled_td_list)) {
 			list_del(&td->cancelled_td_list);
 			ep_ring->cancels_pending--;
 		}
-		/* Leave the TD around for the reset endpoint function to use */
-		if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) {
+		/* Leave the TD around for the reset endpoint function to use
+		 * (but only if it's not a control endpoint, since we already
+		 * queued the Set TR dequeue pointer command for stalled
+		 * control endpoints).
+		 */
+		if (usb_endpoint_xfer_control(&urb->ep->desc) ||
+			(trb_comp_code != COMP_STALL &&
+				trb_comp_code != COMP_BABBLE)) {
 			kfree(td);
 		}
 		urb->hcpriv = NULL;
@@ -1094,7 +1228,7 @@
 	if (urb) {
 		usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
 		xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
-				urb, td->urb->actual_length, status);
+				urb, urb->actual_length, status);
 		spin_unlock(&xhci->lock);
 		usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
 		spin_lock(&xhci->lock);
@@ -1335,6 +1469,47 @@
 	ring_ep_doorbell(xhci, slot_id, ep_index);
 }
 
+/*
+ * xHCI uses normal TRBs for both bulk and interrupt.  When the interrupt
+ * endpoint is to be serviced, the xHC will consume (at most) one TD.  A TD
+ * (comprised of sg list entries) can take several service intervals to
+ * transmit.
+ */
+int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci,
+			xhci->devs[slot_id]->out_ctx, ep_index);
+	int xhci_interval;
+	int ep_interval;
+
+	xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info);
+	ep_interval = urb->interval;
+	/* Convert to microframes */
+	if (urb->dev->speed == USB_SPEED_LOW ||
+			urb->dev->speed == USB_SPEED_FULL)
+		ep_interval *= 8;
+	/* FIXME change this to a warning and a suggestion to use the new API
+	 * to set the polling interval (once the API is added).
+	 */
+	if (xhci_interval != ep_interval) {
+		if (!printk_ratelimit())
+			dev_dbg(&urb->dev->dev, "Driver uses different interval"
+					" (%d microframe%s) than xHCI "
+					"(%d microframe%s)\n",
+					ep_interval,
+					ep_interval == 1 ? "" : "s",
+					xhci_interval,
+					xhci_interval == 1 ? "" : "s");
+		urb->interval = xhci_interval;
+		/* Convert back to frames for LS/FS devices */
+		if (urb->dev->speed == USB_SPEED_LOW ||
+				urb->dev->speed == USB_SPEED_FULL)
+			urb->interval /= 8;
+	}
+	return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+}
+
 static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		struct urb *urb, int slot_id, unsigned int ep_index)
 {
@@ -1733,6 +1908,15 @@
 			TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
 }
 
+/* Queue an evaluate context command TRB */
+int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+		u32 slot_id)
+{
+	return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+			upper_32_bits(in_ctx_ptr), 0,
+			TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id));
+}
+
 int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index)
 {
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/serial/console.c linux-2.6.31-usb.current/drivers/usb/serial/console.c
--- linux-2.6.31-tty.current/drivers/usb/serial/console.c	2009-09-10 15:03:35.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/serial/console.c	2009-09-14 14:44:31.000000000 -0700
@@ -175,6 +175,7 @@
 	/* The console is special in terms of closing the device so
 	 * indicate this port is now acting as a system console. */
 	port->console = 1;
+	port->console_init_baud = baud;
 	retval = 0;
 
 out:
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/serial/ftdi_sio.c linux-2.6.31-usb.current/drivers/usb/serial/ftdi_sio.c
--- linux-2.6.31-tty.current/drivers/usb/serial/ftdi_sio.c	2009-09-10 15:03:35.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/serial/ftdi_sio.c	2009-09-14 14:44:31.000000000 -0700
@@ -176,6 +176,9 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
@@ -702,6 +705,8 @@
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/serial/ftdi_sio.h linux-2.6.31-usb.current/drivers/usb/serial/ftdi_sio.h
--- linux-2.6.31-tty.current/drivers/usb/serial/ftdi_sio.h	2009-09-10 15:03:35.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/serial/ftdi_sio.h	2009-09-14 14:44:31.000000000 -0700
@@ -81,6 +81,9 @@
 
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID	0xBFD8
+#define FTDI_OPENDCC_SNIFFER_PID	0xBFD9
+#define FTDI_OPENDCC_THROTTLE_PID	0xBFDA
+#define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
 
 /* Sprog II (Andrew Crosland's SprogII DCC interface) */
 #define FTDI_SPROG_II		0xF0C8
@@ -968,6 +971,12 @@
 #define MARVELL_OPENRD_PID	0x9e90
 
 /*
+ * Hameg HO820 and HO870 interface (using VID 0x0403)
+ */
+#define        HAMEG_HO820_PID         0xed74
+#define        HAMEG_HO870_PID         0xed71
+
+/*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
  *   wValue:         0
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/serial/option.c linux-2.6.31-usb.current/drivers/usb/serial/option.c
--- linux-2.6.31-tty.current/drivers/usb/serial/option.c	2009-09-10 15:03:36.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/serial/option.c	2009-09-14 14:44:31.000000000 -0700
@@ -292,6 +292,7 @@
 
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
+#define TELIT_PRODUCT_UC864G			0x1004
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
@@ -300,6 +301,7 @@
 #define ZTE_PRODUCT_MF626			0x0031
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
 #define ZTE_PRODUCT_AC8710			0xfff1
+#define ZTE_PRODUCT_AC2726			0xfff5
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -503,6 +505,7 @@
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
@@ -572,6 +575,7 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/serial/pl2303.c linux-2.6.31-usb.current/drivers/usb/serial/pl2303.c
--- linux-2.6.31-tty.current/drivers/usb/serial/pl2303.c	2009-09-10 15:03:36.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/serial/pl2303.c	2009-09-14 14:44:31.000000000 -0700
@@ -96,6 +96,7 @@
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
+	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/serial/pl2303.h linux-2.6.31-usb.current/drivers/usb/serial/pl2303.h
--- linux-2.6.31-tty.current/drivers/usb/serial/pl2303.h	2009-09-10 15:03:36.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/serial/pl2303.h	2009-09-14 14:44:31.000000000 -0700
@@ -130,3 +130,7 @@
 /* Sony, USB data cable for CMD-Jxx mobile phones */
 #define SONY_VENDOR_ID		0x054c
 #define SONY_QN3USB_PRODUCT_ID	0x0437
+
+/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
+#define SANWA_VENDOR_ID		0x11ad
+#define SANWA_PRODUCT_ID	0x0001
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/serial/usb-serial.c linux-2.6.31-usb.current/drivers/usb/serial/usb-serial.c
--- linux-2.6.31-tty.current/drivers/usb/serial/usb-serial.c	2009-09-10 15:03:36.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/serial/usb-serial.c	2009-09-14 14:44:31.000000000 -0700
@@ -223,8 +223,7 @@
 	tty->driver_data = port;
 	tty_port_tty_set(&port->port, tty);
 
-	/* If the console is attached, the device is already open */
-	if (port->port.count == 1 && !port->console) {
+	if (port->port.count == 1) {
 		first = 1;
 		/* lock this module before we call it
 		 * this may fail, which means we must bail out,
@@ -242,11 +241,17 @@
 		if (retval)
 			goto bailout_module_put;
 
-		/* only call the device specific open if this
-		 * is the first time the port is opened */
-		retval = serial->type->open(tty, port, filp);
-		if (retval)
-			goto bailout_interface_put;
+		/* only call the device specific open if this is the
+		 * first time the port is opened and it is not a
+		 * console port where the HW has already been
+		 * initialized */
+		if (port->console) {
+			tty_encode_baud_rate(tty, port->console_init_baud, port->console_init_baud);
+		} else {
+			retval = serial->type->open(tty, port, filp);
+			if (retval)
+				goto bailout_interface_put;
+		}
 		mutex_unlock(&serial->disc_mutex);
 		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
 	}
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/drivers/usb/storage/onetouch.c linux-2.6.31-usb.current/drivers/usb/storage/onetouch.c
--- linux-2.6.31-tty.current/drivers/usb/storage/onetouch.c	2009-06-15 12:15:47.000000000 -0700
+++ linux-2.6.31-usb.current/drivers/usb/storage/onetouch.c	2009-09-14 14:44:31.000000000 -0700
@@ -163,7 +163,7 @@
 			usb_kill_urb(onetouch->irq);
 			break;
 		case US_RESUME:
-			if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0)
+			if (usb_submit_urb(onetouch->irq, GFP_NOIO) != 0)
 				dev_err(&onetouch->irq->dev->dev,
 					"usb_submit_urb failed\n");
 			break;
diff -Naur -X linux-2.6.31-tty.current/Documentation/dontdiff linux-2.6.31-tty.current/include/linux/usb/serial.h linux-2.6.31-usb.current/include/linux/usb/serial.h
--- linux-2.6.31-tty.current/include/linux/usb/serial.h	2009-09-10 15:03:39.000000000 -0700
+++ linux-2.6.31-usb.current/include/linux/usb/serial.h	2009-09-14 14:44:31.000000000 -0700
@@ -107,6 +107,7 @@
 	char			throttled;
 	char			throttle_req;
 	char			console;
+	int			console_init_baud;
 	unsigned long		sysrq; /* sysrq timeout */
 	struct device		dev;
 	enum port_dev_state	dev_state;