From duncan.sands@math.u-psud.fr Wed May 11 11:17:19 2005 Subject: [PATCH 5/5] USB ATM: bits and bobs From: Duncan Sands To: Greg KH Cc: usbatm@lists.infradead.org, Roman Kagan Date: Wed, 11 May 2005 20:15:37 +0200 Message-Id: <1115835337.8983.62.camel@localhost.localdomain> Makefile and Kconfig entries for the new drivers. Signed-off-by: Duncan Sands Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/Kconfig | 50 +++++++++++++++++++++++++++++++++++++---------- drivers/usb/atm/Makefile | 7 +++--- 2 files changed, 44 insertions(+), 13 deletions(-) --- gregkh-2.6.orig/drivers/usb/atm/Makefile 2005-03-01 23:38:20.000000000 -0800 +++ gregkh-2.6/drivers/usb/atm/Makefile 2005-05-13 14:05:06.000000000 -0700 @@ -1,7 +1,8 @@ # -# Makefile for the rest of the USB drivers -# (the ones that don't fit into any other categories) +# Makefile for USB ATM/xDSL drivers # -obj-$(CONFIG_USB_ATM) += usb_atm.o +obj-$(CONFIG_USB_CXACRU) += cxacru.o obj-$(CONFIG_USB_SPEEDTOUCH) += speedtch.o +obj-$(CONFIG_USB_ATM) += usbatm.o +obj-$(CONFIG_USB_XUSBATM) += xusbatm.o --- gregkh-2.6.orig/drivers/usb/atm/Kconfig 2005-03-01 23:37:30.000000000 -0800 +++ gregkh-2.6/drivers/usb/atm/Kconfig 2005-05-13 14:05:06.000000000 -0700 @@ -1,30 +1,60 @@ # -# USB ATM driver configuration +# USB/ATM DSL configuration # -comment "USB ATM/DSL drivers" + +menu "USB DSL modem support" depends on USB config USB_ATM - tristate "Generic USB ATM/DSL core I/O support" + tristate "USB DSL modem support" depends on USB && ATM select CRC32 default n help - This provides a library which is used for packet I/O by USB DSL - modems, such as the SpeedTouch driver below. + Say Y here if you want to connect a USB Digital Subscriber Line (DSL) + modem to your computer's USB port. You will then need to choose your + modem from the list below. To compile this driver as a module, choose M here: the - module will be called usb_atm. + module will be called usbatm. config USB_SPEEDTOUCH - tristate "Alcatel Speedtouch USB support" - depends on USB && ATM - select USB_ATM + tristate "Speedtouch USB support" + depends on USB_ATM + select FW_LOADER help - Say Y here if you have an Alcatel SpeedTouch USB or SpeedTouch 330 + Say Y here if you have an SpeedTouch USB or SpeedTouch 330 modem. In order to use your modem you will need to install the two parts of the firmware, extracted by the user space tools; see for details. To compile this driver as a module, choose M here: the module will be called speedtch. + +config USB_CXACRU + tristate "Conexant AccessRunner USB support" + depends on USB_ATM + select FW_LOADER + help + Say Y here if you have an ADSL USB modem based on the Conexant + AccessRunner chipset. In order to use your modem you will need to + install the firmware, extracted by the user space tools; see + for details. + + To compile this driver as a module, choose M here: the + module will be called cxacru. + +config USB_XUSBATM + tristate "Other USB DSL modem support" + depends on USB_ATM + help + Say Y here if you have a DSL USB modem not explicitly supported by + another USB DSL drivers. In order to use your modem you will need to + pass the vendor ID, product ID, and endpoint numbers for transmission + and reception as module parameters. You may need to initialize the + the modem using a user space utility (a firmware loader for example). + + To compile this driver as a module, choose M here: the + module will be called xusbatm. + +endmenu