This will enable TI wl12xx driver support for the following chips: wl1271, wl1273, wl1281 and wl1283. The drivers make use of the mac80211 stack.
This module adds support for wireless adapters based on TI wl1271 and TI wl1273 chipsets. This module does *not* include support for wl1251. For wl1251 support, use the separate homonymous driver instead. If you choose to build a module, it will be called wl12xx. Say N if unsure.
This will enable 802.11 HT support in the wl12xx module. That configuration is temporary due to the code incomplete and still in testing process.
This module adds support for the SPI interface of adapters using TI wl12xx chipsets. Select this if your platform is using the SPI bus. If you choose to build a module, it'll be called wl12xx_spi. Say N if unsure.
This module adds support for the SDIO interface of adapters using TI wl12xx chipsets. Select this if your platform is using the SDIO bus. If you choose to build a module, it'll be called wl12xx_sdio. Say N if unsure.
This module adds support for the SDIO bus testing with the TI wl12xx chipsets. You probably don't want this unless you are testing a new hardware platform. Select this if you want to test the SDIO bus which is connected to the wl12xx chip.