This driver adds legacy support for SJA1000 chips connected to the ISA bus using I/O port, memory mapped or indirect access.
This driver adds support for the SJA1000 chips connected to the "platform bus" (Linux abstraction for directly to the processor attached devices). Which can be found on various boards from Phytec (http://www.phytec.de) like the PCM027, PCM038.
This driver adds support for the SJA1000 chips connected to the OpenFirmware "platform bus" found on embedded systems with OpenFirmware bindings, e.g. if you have a PowerPC based system you may want to enable this option.
This driver is for the one, two or four channel CPC-PCI, CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
This driver is for the the PCIcanx and PCIcan cards (1, 2 or 4 channel) from Kvaser (http://www.kvaser.com).
This driver is for CAN interface cards based on the PLX90xx PCI bridge. Driver supports now: - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) - Adlink PCI-7841/cPCI-7841 SE card - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/) - esd CAN-PCI/PMC/266 - esd CAN-PCIe/2000 - Marathon CAN-bus-PCI card (http://www.marathon.ru/) - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
This driver is for Technologic Systems' TSCAN-1 PC104 boards. http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1 The driver supports multiple boards and automatically configures them: PLD IO base addresses are read from jumpers JP1 and JP2, IRQ numbers are read from jumpers JP4 and JP5, SJA1000 IO base addresses are chosen heuristically (first that works).