By enabling this you will be able to choose the various supported USB1.1 and USB2.0 DVB devices. Almost every USB device needs a firmware, please look into <file:Documentation/dvb/README.dvb-usb>. For a complete list of supported USB devices see the LinuxTV DVB Wiki: <http://www.linuxtv.org/wiki/index.php/DVB_USB> Say Y if you own a USB DVB device.
Say Y if you want to enable debugging. See modinfo dvb-usb (and the appropriate drivers) for debug levels.
Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. For an up-to-date list of devices supported by this driver, have a look on the Linux-DVB Wiki at www.linuxtv.org. Say Y if you own such a device and want to use it. You should build it as a module.
Support for faulty USB IDs due to an invalid EEPROM on some Artec devices.
Support for USB2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. For an up-to-date list of devices supported by this driver, have a look on the Linux-DVB Wiki at www.linuxtv.org. Say Y if you own such a device and want to use it. You should build it as a module.
Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The USB bridge is also present in devices having the DiB7700 DVB-T-USB silicon. This chip can be found in devices offered by Hauppauge, Avermedia and other big and small companies. For an up-to-date list of devices supported by this driver, have a look on the LinuxTV Wiki at www.linuxtv.org. Say Y if you own such a device and want to use it. You should build it as a module.
Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode shall be added in the future. Devices that require this module: Medion MD95700 hybrid USB2.0 device. DViCO FusionHDTV (Bluebird) USB2.0 devices
Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. Currently, only devices with a product id of "DTV USB MINI" (in cold state) are supported. Firmware required.
Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 receiver with USB ID 0db0:5581.
Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver.
Say Y here to support the TwinhanDTV Alpha (stick) (VP-7045), TwinhanDTV MagicBox II (VP-7046), DigitalNow TinyUSB 2 DVB-t, DigitalRise USB 2.0 Ter (Beetle) and TYPHOON DVB-T USB DRIVE DVB-T USB2.0 receivers.
Say Y here to support the TwinhanDTV StarBox, DigitalRise USB Starbox and TYPHOON DVB-S USB 2.0 BOX DVB-S USB2.0 receivers.
Say Y here to support the GENPIX 8psk module DVB-S USB2.0 receivers.
Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The firmware protocol used by this module is similar to the one used by the old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan). The WT-220U and its clones are pen-sized.
Say Y here to support the Opera DVB-S USB2.0 receiver.
Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver and the TerraTec Cinergy T USB XE (Rev.1)
Say Y here to support the default remote control decoding for the Afatech AF9005 based receiver.
Say Y here to support the DvbWorld, TeVii, Prof DVB-S/S2 USB2.0 receivers.
Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers Say Y if you own such a device and want to use it.
Say Y here to support the Anysee E30, Anysee E30 Plus or Anysee E30 C Plus DVB USB2.0 receiver.
Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver
Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver
Say Y here to support the Japanese DTV receiver Friio.
Say Y here to support the E3C EC168 DVB-T USB2.0 receiver.
Say Y here to support the AZ6027 device
Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 .
Say Y here to support the Technisat USB2 DVB-S/S2 device