Remove the static dependency of DVB card drivers on all frontend modules for all possible card variants. Instead, allow the card drivers to only load the frontend modules they require. Also, tuner module will automatically load a tuner driver when needed, for analog mode. This saves several KBytes of memory. Note: You will need module-init-tools v3.2 or later for this feature. If unsure say Y.
This allows the user to deselect tuner drivers unnecessary for their hardware from the build. Use this option with care as deselecting tuner drivers which are in fact necessary will result in V4L/DVB devices which cannot be tuned due to lack of driver support If unsure say N.
Say Y here to include support for various simple tuners.
Say Y here to include support for Philips TDA8290+8275(a) tuner.
A DVB-T silicon tuner module. Say Y when you want to support this tuner.
A silicon tuner module. Say Y when you want to support this tuner.
Say Y here to include support for Philips TDA9885/6/7 analog IF demodulator.
Say Y here to include support for the Philips TEA5761 radio tuner.
Say Y here to include support for the Philips TEA5767 radio tuner.
Say Y here to include support for the MT2032 / MT2050 tuner.
A driver for the silicon IF tuner MT2060 from Microtune.
A driver for the silicon baseband tuner MT2266 from Microtune.
A driver for the silicon baseband tuner MT2131 from Microtune.
A driver for the silicon tuner QT1010 from Quantek.
Say Y here to include support for the xc2028/xc3028 tuners.
A driver for the silicon tuner XC5000 from Xceive. This device is only used inside a SiP called together with a demodulator for now.
A driver for the silicon tuner MXL5005S from MaxLinear.
A driver for the silicon tuner MxL5007T from MaxLinear.
Say Y here to support the Freescale MC44S803 based tuners
A driver for the silicon tuner MAX2165 from Maxim.
NXP TDA18218 silicon tuner driver.
NXP TDA18212 silicon tuner driver.